Color TV with built-in VCR
O wner’s Manual
CCC134AT
CCC194AT
Read this manual first!
Congratulations on purchasing this Philips product.
We’ve included everything you need to get started.
If you have any problems, Philips Representatives can
help you get the most from your new product by explaining:
• Hookups,
• First Time Setup, and
• Feature Operation.
Do not attempt to return this product to the store.
For fast help, call us first!
1-800-531-0039
Thank you for making Philips a part of your home!
Introduction 3
W elcom e to your TV/VCR owner’s m anual.
This manual describes two models: CCC134 and CCC194. The models may look different, but they operate
exactly the same. The CCC134 is illustrated in this manual. The features in this manual apply to both models.
Features
• One-Touch Recording
• Remote Control with ability to
operate a Cable Box/Direct
Broadcast System
• SmartClockTM
• Automatic Head Cleaner
• Automatic Tracking Adjustment
• Blue Background
• SmartLockTM
• SmartPictureTM
• Timer Recording
• Timers: Sleep, Wake Up
• VCR Plus+ Programming System
• Closed Caption
• English or Spanish displays
• FM Radio
• 19 micron head, improves the
picture quality during playback of
SLP tapes
• Repeat Play; A-B Repeat Play
• S-VHS Quasi Play Back (SQPB)
• Search: Index, Skip
• ShowGuardTM - Indefinite Timer
Recording memory
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this
equipment to rain or moisture.
Federal Com m unications Com m ission (FCC) W arning: Any
unauthorized changes or modifications to this equipment void the user’s
authority to operate it.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a partic-
ular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
Philips Consum er Electronics recommends you use only video cassette
tapes that have the
mark. Other tapes may cause poor picture quality
and excessive deposits on the video heads that the warranty may not cover
if damage occurs.
This TV/VCR has a High Quality (HQ) system and is compatible with exist-
ing Video Home System (VHS) equipment.
Note to the Cable TV System Installer: This reminder calls the Cable
TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding – in particular, speci-
fying that the cable ground shall be connected to the grounding system of
the building, as close to the point of cable entry as possible.
Declaration of Conform ity
Model Numbers: CCC134AT and CCC194AT
Trade Name:
Philips
Responsible Party: Philips Consumer Electronics
P.O. Box 14810
Knoxville, TN 37914-1810 / (865) 521-4316
As an ENERGY STAR® Partner, Philips Consumer Electronics has determined that this product meets the ENERGY STAR® guidelines for energy
efficiency. ENERGY STAR® is a U.S. registered mark. Using products with the ENERGY STAR® label can save energy. Saving energy reduces air pollu-
tion and lowers utility bills.
VCR Plus+® and PlusCode® are registered trademarks of Gemstar Development Corporation. The VCR Plus+ Programming system is manufactured
under license from Gemstar Development Corporation.
SmartClockTM, SmartLockTM, and ShowGuardTM are trademarks of Philips Consumer Electronics. Copyright 2001 Philips Consumer Electronics. All rights
reserved.
4 Table of Contents
Setting Up Your TV/VCR
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Before Using the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Hooking Up the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-7
Turning On the TV/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Automatic Channel Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-11
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-17
Daylight-Savings Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Time Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Setting the Remote to Operate a Cable Box/DBS . . . . . . . . . . . . . . . . . . . . . . . . . .20-21
Description of Controls
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24-25
Adjusting the Picture Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
On-Screen Status Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Basic O perations
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Recording O ptions
One-Touch Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Rerecording (Tape Duplication) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Defeat Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34-37
Setting Up the VCR Plus+ Programming System . . . . . . . . . . . . . . . . . . . . . . . . . . .38-39
Timer Recording With the VCR Plus+ Programming System . . . . . . . . . . . . . . . . . .40-41
Playing O ptions
Real-Time Counter Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
A-B Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44-45
Playback Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Additional Features
Blue Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
SmartLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48-51
Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Wake Up Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-55
Volume Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Automatic Operation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
SmartPicture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
FM Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Inform ation You May Need
Helpful Hints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62-63
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Before Using the TV/VCR 5
Putting Batteries in the Rem ote Control
1
1
Rem ove the battery com partm ent lid on the bottom of the
remote control by pressing in the tab, then pulling up the lid.
2
Place two AA batteries inside the battery com partm ent
with their and ends aligned as indicated.
+
–
2
3
3
Replace the battery com partm ent lid.
Battery Safety
G Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury or damage to the unit:
Install ALL batteries correctly, with the + and - markings on the
battery aligned as indicated on the unit;
Do not mix batteries, for example, old with new or carbon with
alkaline; and
Remove batteries when the unit will not be used for a long time.
Recording Prevention
Video cassette tapes have record tabs to ensure you do not erase
recordings accidentally.
1 2
1
To prevent accidental erasure, break off the tab with a
screwdriver.
2
Helpful Hints
To record again, cover the hole with cellophane tape.
• Before doing anything else, record
the TV/VCR’s model and serial num-
bers in the spaces provided on page
two. These numbers will help us
assist you if you ever call for help.
• Your new product, its packaging,
and this manual contain materials
that can be recycled and reused.
Specialized companies can recycle
your product to increase the
amount of reusable materials and
to minimize the amount that needs
to be properly disposed.
Your product uses batteries that
should not be thrown away when
depleted but should be disposed of
as small chemical waste.
Using the Rem ote Control
G Point the remote control at the TV/VCR’s remote sensor, then
press the COMBI button when using the remote control to
operate the TV/VCR. Point the remote control at the Cable
Box/DBS, then press the CABLE/DBS button when using the
remote control to operate the Cable Box/DBS.
G Do not put objects between the remote control and the TV/VCR.
TV/VCR Maintenance
G In this TV/VCR, use only tapes with the
mark. The use of
other tapes may result in poor picture quality and excessive
deposits on the video heads, which may not be covered by the
warranty if damage occurs.
G Remove any light adhesive stick-on notes from the video cassette
tape before putting the tape in the TV/VCR. Removable labels can
jam the TV/VCR.
G The TV/VCR requires periodic maintenance to maintain its excel-
lent performance. This TV/VCR has an automatic head cleaning
system. However, the video heads will eventually require cleaning
or replacement. Only an authorized service center should perform
this service.
Please find out about the local regula-
tions on disposal of your old product,
batteries, manual, and packaging
when you replace existing equipment.
6 Hooking Up the TV/VCR
1
Hook up your TV/VCR using one of the connections shown.
Connect a Cable signal
or an antenna to the
ANT(enna) Jack.
A.
Hooking Up Your TV/VCR
W ith a Cable Signal or
O utdoor Antenna
ANT.
ANT.
Connect the Cable signal to
the IN Jack on the Cable Box.
B.
Connect an RF coaxial cable (75-
ohm, not supplied) to the OUT Jack
on the Cable Box and to the
Hooking Up Your TV/VCR
W ith a Cable Box
To view any channel, set the
TV/VCR to the Cable Box output
channel (channel 03 or 04). Then,
select channels at the Cable Box.
ANT(enna) Jack on the TV/VCR.
IN
OUT
RF coaxial cable
(not supplied)
ANT.
ANT.
Rod Antenna
(not supplied)
C.
Hooking Up Your TV/VCR
W ith an Indoor Antenna
To install a rod antenna (not sup-
plied), push the stem of the antenna
into the antenna hole on the top of
the TV/VCR. Connect the antenna
wire to the ANT(enna) Jack on the
back of the TV/VCR as shown.
Extend the antenna and adjust its
length, direction, and angle for the
clearest picture.
ANT.
ANT.
Hooking Up the TV/VCR (cont’d) 7
D.
Hooking Up Your TV/VCR to Another Video Source
(VCR, DVD Player, Cam corder, etc.)
You may need this connection if you want to copy tapes or view tapes or discs that you are playing on the
VCR, DVD Player, or camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes or discs
that are playing on the VCR, DVD Player, or camcorder. Details are on page 32.
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO In Jack
on the front of the TV/VCR.
Jacks on VCR (example)
AUDIO/VIDEO OUT
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
AUDIO VIDEO
STOP
EJECT
REW
PLAY
F.FWD
REC
OTR
CHANNEL
VOLUME
POWER
AUDIO
VIDEO
3CH
4CH
IN
AUDIO VIDEO
ANT.
OUT
OUT
AUDIO/VIDEO In Jacks
on front of TV/VCR
IN
Use a Video cable to connect the VIDEO OUT Jack on the
VCR to the VIDEO In Jack on the front of the TV/VCR.
2
W hen all other connections are com plete, plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
Helpful Hints
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CCC134 only.)
• Audio and video cables are not supplied.
Bent pin
Crooked Pin
Straight Pin
Plug
Cable
8 Turning On the TV/VCR
Before you turn on the TV/VCR, make sure batteries are in the
remote control and you have connected the TV/VCR correctly.
The instructions on this page work only when you turn on the
TV/VCR for the first time.
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
1
3
5
1
1
4
7
2
5
8
3
6
9
Press the COMBI button, then press the POW ER button.
The TV/VCR will come on and the screen shown below will appear.
SLEEP/
WAKE UP
ALT.CH
SELECT LANGUAGE
0
> ENGLISH
ON
REC
/OTR
PAUSE
/STILL
PLAY
ESPAÑOL
2
4
5
REW
F.FWD
SELECT KL OR
PRESS MENU TO CONTINUE
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
2
Press the PLAY/K button or the STO P/L button to select
SPEED MEMORY VCR PLUS+
English or Spanish on-screen displays and m enus.
F.ADV
SLOW
ENTER
1
TRACKING
VAR.SLOW
INDEX
SKIP
3
SEARCH
Press the MENU button. The screen shown below will appear.
CONNECT ANTENNA OR CABLE
TO TVCR
THEN PRESS
B
TO END PRESS EXIT
Helpful Hints
4
Press the F.FW D/B button to begin autom atic channel
setup. The TV/VCR will memorize all available channels. When
channels are set, CHANNELS ARE SET will appear on the screen
briefly. Then the TV/VCR will go to the lowest available channel.
If you try to set up channels when there is no antenna or cable
connected to the TV/VCR, programming will appear to take place,
but eventually a NO TV SIGNALS ... message will appear on the
screen. Connect an antenna or cable to the ANT(enna) jack on
the TV/VCR, then press the F.FWD/B button again. You may
need to follow the steps on page 10 instead.
• If you do not see any on-screen dis-
plays when you turn on the TV/VCR,
check your hookups, then try again.
If you still do not see any on-screen
displays, follow the steps on pages
nine-10 to select a language and
set up channels.
• To skip step 2, press the MENU
button. All on-screen displays will be
in English. To skip step 4, press the
STATUS/EXIT button. Automatic
Channel setup will not occur, and
CHANNELS NOT SET will appear
on the screen briefly.
5
o
/
p
Use the CH(annel)
buttons or the Num ber buttons
• You cannot set up channels if you
are using a Cable Box.
on the rem ote control to select a TV/VCR channel. Use
o
/
p
the VO L(um e)
buttons to adjust the sound.
• Line Input mode is channel 00.
When you select channel 00, A/V
IN will appear on the screen briefly.
Press the CH(annel) o/p buttons
or the Number buttons to select
another channel.
o
/
p
When you scan channels with the CH(annel)
the memorized channels will be available. Use the Number but-
tons to select non-memorized channels.
buttons, only
Language Selection 9
Follow the steps below to change the language of the on-screen
displays and menus.
5 2-4
1
Press the CO MBI button, then press the MENU button.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
1
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
1
4
7
2
5
8
3
6
9
REMINDER
BRIGHTNESS
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
2
REW
F.FWD
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
STOP
MUTE
CH.
VOL.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
CABLE
SMART
PICTURE
COMBI
/DBS
[ON]
SPEED MEMORY VCR PLUS+
SELECT KL CHOOSE
B
TO END PRESS EXIT
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
3
Press the PLAY/G button or the STO P/G button to
choose SELECT LANGUAGE. Then, press the F.FW D/B
button.
SELECT LANGUAGE
> ENGLISH
ON
ESPAÑOL
SELECT KL
TO END PRESS EXIT
4
Press the PLAY/G button or the STO P/G button to select
ENGLISH or ESPAÑO L (Spanish).
Helpful Hint
• If you accidentally select Spanish
and need English on-screen displays
and menus:
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/o button or the
STOP/p button to select PREPARA-
CION, then press the F.FWD/B
button.
5
Press the STATUS/EXIT button.
3) Press the PLAY/o button or the
STOP/p button to select SELEC-
CION IDIOMA, then press the
F.FWD/B button.
4) Press the PLAY/o button or the
STOP/p button to select ENGLISH.
5) Press the STATUS/EXIT button.
10 Automatic Channel Setup
Although the TV/VCR may automatically memorize the channels
you receive when you turn it on for the first time, you may set up
channels again by following the steps below.
2-3
EJECT
MENU
1
POWER
CLEAR
STATUS
/EXIT
FM
Press the CO MBI button, then press the MENU button.
1
4
1
4
7
2
5
8
3
6
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
9
SLEEP/
WAKE UP
ALT.CH
REMINDER
0
BRIGHTNESS
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
2
STOP
MUTE
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP, then press the F.FW D/B button.
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
PRIMARY SETUP
COMBI
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SPEED MEMORY VCR PLUS+
VOLUME BAR
SET CLOCK
[ON]
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
SELECT KL CHOOSE
B
TO END PRESS EXIT
INDEX
SKIP
SEARCH
3
Press the PLAY/G button or the STOP/G button to select
AUTO PROGRAMMING, then press the F.FW D/B button.
AUTO CH PROGRAMMING ... will appear on the screen. The
TV/VCR distinguishes between TV channels and cable channels auto-
matically, and the TV/VCR will memorize its available channels.
Wait for the TV/VCR to set up
channels.
4
W ait for a few m inutes. When setup is complete, CHANNELS
ARE SET will appear on the screen. Then the programming of the
lowest channel number will appear on the screen. Now, when you
press the CH(annel) o/p buttons, you will scan only through
channels you receive. You can still select non-memorized channels
using the Number buttons.
Helpful Hints
• Line Input mode will always be
channel 00. You cannot delete it.
• You can not select AUTO PRO-
GRAMMING at step 3 if you are in
Line Input mode.
Automatic Channel Setup (cont’d) 11
Adding/Deleting Channels
If your channel lineup changes, you may want to add newly avail-
able channels or remove channels that are no longer available in
your area. You can use the CH(annel) o/p buttons to scroll
through only the available channels. To add or delete channels
from the TV/VCR’s memory, follow these steps.
5
EJECT
MENU
POWER
CLEAR
STATUS
FM
/EXIT
1
1
4
7
2
3
6
9
1
5
8
Press the CO MBI button, then press the MENU button.
SLEEP/
WAKE UP
ALT.CH
0
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REC
PAUSE
/STILL
/OTR
PLAY
REMINDER
REW
F.FWD
BRIGHTNESS
2,4
STOP
MUTE
CH.
VOL.
2
CABLE
/DBS
SMART
PICTURE
COMBI
3
Press the PLAY/o button or the STO P/p button to select
SPEED MEMORY VCR PLUS+
CHANNEL.
1
TO ADJUST PRESS { /
B
CH123
SAVED
>
CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
Helpful Hints
• Line Input mode will always be
3
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
• To review the memorized channels,
follow these steps.
1) Press the COMBI button, then
press the MENU button.
Press the CH(annel) o/p buttons or the Num ber buttons
to select the channel you want to add or delete. The chan-
nel number will appear in the upper left corner of the screen.
TO ADJUST PRESS { /
CH23
B
SAVED
>
CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
2) Press the PLAY/GGbutton or the
STOP/G button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/GGbutton or the
STOP/G button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/{ button to see the
previous screen of channels.
EXIT
PRIM. SETUP
4
Press the F.FW D/B button or the REW (ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the last channel you selected will appear.
5) Press the STATUS/EXIT button
once or twice.
12 Setting the Clock
There are three ways to set the clock: Manually, with Automatic PBS
Channel Selection, or with Manual PBS Channel Selection. With
manual clock setting, you tell the TV/VCR the current time. With
Automatic or Manual PBS Channel Selection, the TV/VCR gets the
time from your local PBS station. If you use either Manual PBS
Channel Selection or Automatic PBS Channel Selection, follow the
steps on page 19 to have the TV/VCR maintain the clock according
to your Time Zone. The channel that supplies the time might broad-
cast from a different time zone. So, select your Time Zone to ensure
the clock is correct.
Cable Box users m ust set the clock m anually.
To set the clock manually, follow the steps on pages 12-13. To set
the clock using Automatic PBS Channel Selection, follow the steps
on pages 14-15. To set the clock using Manual PBS Channel
Selection, follow the steps on pages 16-17.
2-3
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
1
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
Before you begin, make sure:
G You have connected and turned on the TV/VCR. Details are on
pages six-eight.
G Channels are set. Details are on page 10.
G Tape playback is stopped. You can not use Automatic or Manual
PBS Channel Selection during tape playback.
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
G You make each entry within 60 seconds of the previous entry.
Manual Clock Setting
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
1
SEARCH
Press the CO MBI button, then press the MENU button.
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
BRIGHTNESS
PRESS
B
2
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
3
Press the PLAY/G button or the STO P/G button to select
SET CLO CK. Then, press the F.FW D/B button.
• Entries that do not match the
TV/VCR’s calendar will cause a
question mark (?) to appear on the
screen.
• To make corrections while you are
setting the clock, press the CLEAR
button until the space for the num-
ber you want to correct is flashing.
Then enter the correct number.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
Setting the Clock (cont’d) 13
4
7
5-6
Press the PLAY/G button or the STO P/G button to select
SET MANUAL CLO CK, then press the F.FW D/B button.
EJECT
SET MANUAL CLOCK
POWER
CLEAR
STATUS
/EXIT
TIME – – : – –
MENU
FM
DATE – – / – – / – – – –
1
4
7
2
5
8
3
6
9
TO END PRESS EXIT
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
5
PLAY
Press two Num ber buttons for the hour(s) and two
Num ber buttons for the m inute(s). Then press 1 for AM
or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
REW
F.FWD
STOP
MUTE
4
CH.
VOL.
SET MANUAL CLOCK
CABLE
SMART
PICTURE
COMBI
TIME
09 : 30 PM
/DBS
MONTH
– – / – – / – – – –
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
6
Press two Num ber buttons for the m onth, two Num ber
buttons for the day, and two Num ber buttons for the
year. For example, for July 1, 2001, press 07, 01, 01. The day of
the week will appear automatically.
SET MANUAL CLOCK
TIME
09 : 30 PM
DATE
07 / 01 / 2001
SUNDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
7
Press the STATUS/EXIT button.
14 Setting the Clock (cont’d)
Autom atic PBS Channel Selection
4 2-4
1
Press the CO MBI button, then press the MENU button.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
1
1
4
7
2
5
8
3
6
9
REMINDER
BRIGHTNESS
SLEEP/
WAKE UP
ALT.CH
0
REC
PAUSE
/STILL
2
/OTR
PLAY
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
REW
F.FWD
STOP
MUTE
PRIMARY SETUP
CH.
VOL.
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
VOLUME BAR
SET CLOCK
CABLE
/DBS
SMART
PICTURE
COMBI
[ON]
SPEED MEMORY VCR PLUS+
SELECT KL CHOOSE
B
TO END PRESS EXIT
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
3
Press the PLAY/G button or the STO P/G button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If ON appears beside AUTO CLOCK, press the MENU but-
ton.
If OFF appears beside AUTO CLOCK, press the PLAY/G
button or the STOP/G button to select AUTO CLOCK,
then press the F.FW D/B button so that ON appears to the
right of AUTO CLOCK. Then, press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Setting the Clock (cont’d) 15
Wait for the TV/VCR to find
the time.
5
6
Press the PLAY/G button or the STOP/G button to select
SET PBS CH. AUTO. Then, press the F.FW D/B button.
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – – – –
7
NOW SEARCHING
TO END PRESS EXIT
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
6
1
4
7
2
5
8
3
6
9
NOW SEARCHING flashes on the TV/VCR screen.
SLEEP/
WAKE UP
ALT.CH
0
7
W hen the TV/VCR finds the PBS channel, the tim e will
appear on the screen. Press the STATUS/EXIT button.
SET AUTO CLOCK
REC
PAUSE
/STILL
/OTR
PLAY
REW
F.FWD
5
STOP
MUTE
TIME
06 : 30 PM
CH.
VOL.
DATE
07 / 01 / 2001
SUNDAY
CABLE
/DBS
SMART
PICTURE
COMBI
TO END PRESS EXIT
SPEED MEMORY VCR PLUS+
G If CANNO T FIND CLO CK DATA flashes on the
TV/VCR screen, you will be prom pted to turn off the
TV/VCR. Turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the clock will be
set.
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
SET AUTO CLOCK
TIME
– – : – –
DATE
– – / – – / – – – –
CANNOT FIND CLOCK DATA
TO END PRESS EXIT
Helpful Hints
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 28.
• You cannot use the AUTO CLOCK
feature if you don’t receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
16 Setting the Clock (cont’d)
Manual PBS Channel Selection
4 2-4
1
Press the CO MBI button, then press the MENU button.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
1
1
4
7
2
5
8
3
6
9
REMINDER
BRIGHTNESS
SLEEP/
WAKE UP
ALT.CH
0
REC
PAUSE
/STILL
2
/OTR
PLAY
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
REW
F.FWD
STOP
MUTE
PRIMARY SETUP
CH.
VOL.
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
CABLE
/DBS
SMART
PICTURE
COMBI
VOLUME BAR
SET CLOCK
[ON]
SPEED MEMORY VCR PLUS+
SELECT KL CHOOSE
B
F.ADV
SLOW
ENTER
TO END PRESS EXIT
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
3
Press the PLAY/G button or the STO P/G button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
If ON appears beside AUTO CLOCK, press the MENU
button.
If OFF appears beside AUTO CLOCK, press the PLAY/G
button or the STOP/G button to select AUTO CLOCK,
then press the F.FW D/B button so that ON appears to the
right of AUTO CLOCK. Then, press the MENU button.
AUTO CLOCK
AUTO CLOCK USES
PBS CHANNEL DATA
>
SET PBS CH. AUTO
SET PBS CH. MANUAL
SELECT KL CHOOSE
B
TO END PRESS EXIT
Setting the Clock (cont’d) 17
5
Press the PLAY/G button or the STO P/G button to
select SET PBS CH. MANUAL. Then, press the F.FW D/B
button.
Wait for the TV/VCR to
find the time.
7
AUTO CLOCK (PBS) CH 02
TIME
– – : – –
8
DATE
– – / – – / – – – –
SELECT CHANNEL NUMBER
TO END PRESS EXIT
EJECT
MENU
POWER
STATUS
/EXIT
CLEAR
FM
1
4
7
2
5
8
3
6
9
6
Use the Num ber buttons to select your PBS station.
6
SLEEP/
AUTO CLOCK (PBS) CH 12
WAKE UP
ALT.CH
0
TIME
– – : – –
REC
/OTR
PAUSE
/STILL
DATE
– – / – – / – – – –
PLAY
NOW SEARCHING
TO END PRESS EXIT
REW
F.FWD
STOP
MUTE
5
CH.
VOL.
CABLE
SMART
PICTURE
COMBI
/DBS
7
NOW SEARCHING flashes on the TV/VCR screen.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
8
W hen the TV/VCR finds the clock data, the tim e will
appear on the screen. Press the STATUS/EXIT button.
AUTO CLOCK (PBS) CH 12
INDEX
SKIP
SEARCH
TIME
06 : 30 PM
DATE
07 / 01 / 2001
SUNDAY
TO END PRESS EXIT
G If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen and you know another PBS channel, press the
PLAY/G button or the STOP/G button to choose
SELECT NEW PBS CH. Then, press the F.FW D/B but-
ton. Repeat step 6.
G If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen and you do not know another channel, press the
PLAY/G button or the STOP/G button to select SET PBS
CH. AUTO. Then, press the F.FW D/B button. The
TV/VCR will search for the PBS channel automatically.
• If the TV/VCR finds the PBS channel, the time will appear on the
screen. Press the STATUS/EXIT button.
• If the TV/VCR does not find the PBS channel, you will be
prompted to turn off the TV/VCR. Leave it off for several min-
utes. When you turn on the TV/VCR again, the time will be set.
Helpful Hints
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection (but
no Cable Box), you may select chan-
nels 1-125 at step 6. Details about
available memorized channels are
on page 11.
• To display the time on the TV/VCR
screen, press the STATUS/EXIT but-
ton. Details are on page 28.
18 Daylight-Savings Time
When the Daylight-Savings Time feature is ON, the TV/VCR clock
will automatically move forward one hour on the first Sunday in
April and move back one hour on the last Sunday in October.
To turn Daylight-Savings Time ON or OFF, follow the steps below.
5
2-4
EJECT
POWER
CLEAR
STATUS
/EXIT
MENU
FM
1
Press the CO MBI button, then press the MENU button.
1
1
4
7
2
5
8
3
6
9
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
PRESS
B
SLEEP/
WAKE UP
ALT.CH
0
REMINDER
REC
PAUSE
/STILL
BRIGHTNESS
/OTR
PLAY
REW
F.FWD
STOP
MUTE
2
CH.
VOL.
Press the PLAY/G button or the STO P/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
CABLE
/DBS
SMART
PICTURE
COMBI
PRIMARY SETUP
SPEED MEMORY VCR PLUS+
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
F.ADV
SLOW
ENTER
VOLUME BAR
SET CLOCK
[ON]
TRACKING
VAR.SLOW
INDEX
SKIP
SELECT KL CHOOSE
B
SEARCH
TO END PRESS EXIT
3
Press the PLAY/G button or the STO P/G button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/G button or the STO P/G button to select
DAYLIGHT SVG.TIME. Then, press the F.FW D/B button
so that O N or O FF appears beside DAYLIGHT SVG.
TIME (Daylight Savings Tim e).
SET CLOCK
AUTO CLOCK
SET MANUAL CLOCK
> DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
5
Press the STATUS/EXIT button.
Time Zone 19
When you set the clock using AUTO CLOCK, specify your time zone.
The TV/VCR will maintain the clock according to your time zone.
6 2-5
1
Press the CO MBI button, then press the MENU button.
EJECT
POWER
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
STATUS
/EXIT
PRESS
B
MENU
CLEAR
FM
1
1
4
7
2
5
8
3
6
9
REMINDER
BRIGHTNESS
SLEEP/
WAKE UP
ALT.CH
0
2
REC
PAUSE
/STILL
/OTR
Press the PLAY/G button or the STO P/G button to select
PLAY
PRIM. SETUP. Then, press the F.FW D/B button.
REW
F.FWD
PRIMARY SETUP
STOP
MUTE
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
CH.
VOL.
VOLUME BAR
SET CLOCK
[ON]
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
SELECT KL CHOOSE
B
TO END PRESS EXIT
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
3
INDEX
SKIP
SEARCH
Press the PLAY/G button or the STO P/G button to select
SET CLO CK. Then, press the F.FW D/B button.
SET CLOCK
> AUTO CLOCK
SET MANUAL CLOCK
DAYLIGHT SVG.TIME
SET TIME ZONE
[AUTO]
[ON]
[ON]
TO CONTINUE PRESS MENU
SELECT KL CHOOSE
TO END PRESS EXIT
B
4
Press the PLAY/G button or the STO P/G button to select
SET TIME ZO NE. Then, press the F.FW D/B button.
SET TIME ZONE
> AUTO
ATLANTIC
[ON]
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
Helpful Hints
SELECT KL
TO CONTINUE PRESS MENU
• If you select AUTO at step 5, the
TV/VCR will set the clock according
to the time zone data of the PBS
station it finds.
• You cannot select SET TIME ZONE
at step 4 if AUTO CLOCK is OFF.
• You may need to turn off the
TV/VCR for several minutes to
enable the TV/VCR clock to adjust
to your time zone.
5
Press the PLAY/G button or the STO P/G button to select
your tim e zone.
6
Press the MENU button, then press the STATUS/EXIT
button.
20 Setting the Remote to Operate a Cable Box/DBS
Your TV/VCR remote control m ay operate your Cable Box/DBS.
If the remote control doesn’t operate your Cable Box/DBS now,
Find your code.
2
1
follow the steps below to program your remote control.
EJECT
MENU
POWER
CLEAR
1
STATUS
/EXIT
FM
Turn on your Cable Box/DBS. Point the remote control at your
Cable Box/DBS and press the CABLE/DBS button. Then,
press the PO W ER button. If your Cable Box/DBS turns off,
try the other Cable Box/DBS buttons (see pages 24-25 for
details). If your Cable Box/DBS doesn’t turn off, or if the other
buttons don’t work, go to step 2.
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
2
STOP
MUTE
Find the brand of your Cable Box/DBS on the lists below
and rem em ber the two-digit num ber beside it.
CH.
VOL.
3
CABLE
/DBS
SMART
PICTURE
COMBI
CABLE BO X CO DES
SPEED MEMORY VCR PLUS+
..
..............
.............
26 SAMSUNG
ARCHER 01, 05, 06, 44 MAGNAVOX
05, 06,
40, 42
.....
CABLETENNA 01, 44 MATSUSHITA
4
F.ADV
SLOW
ENTER
........ .......................
CABLEVIEW
04, 30,
16, 17, 97 SCIENTIFIC ATLANTA
......... ...............................
08, 09
42, 44, 52 MOVIETIME
44 NOVAVISION
42, 44
TRACKING
VAR.SLOW
..................
........
........................
CENTURY
CITIZEN
08, 09 SIGNAL
40 SL MARX
11, 46
26
06, 40, 42,
44, 52
...............
...................
.........
04, 30, NSC/NEC
INDEX
SKIP
......................
42, 44, 52 OAK
SEARCH
................
.........
SPRUCER........
16, 17, 97
CURTIS
08, 09 OAK SIGMA
11, 46
............
..
DIAMOND
01, 44 PANASONIC 16, 17, 97 STANDARD COMPONENTS
...........
.........
PIONEER
...............................
42, 44
EAGLE
26, 40, 62 PHILIPS
07, 23, 50
.............
......
04, 06, 30,
EASTERN/REGENCY
05, 06 STARGATE
04, 30, 42,
44, 52 TELEVIEW
................. ......
...................................
.........
28 PULSAR
04, 30,
42, 44, 52 QUEST
40, 42, 44, 52
..........
.......
06, 40, 42
GC BRAND
05, 06 TOCOM
01, 33, 34, 42
..........
................
....................
GEMINI/JASCO
04 RCA
REALISTIC
.................
16, 17, 97 UNIKA
01, 44
.................
.....
44 UNIVERSAL 42, 44, 52
44 VIDEOWAY
GENERAL ELECTRIC
.............................
......
......
01, 57 RECOTON
07, 23, 50
26, 40, 62
07, 23, 50
.....
GENERAL INSTRUMENT REGAL 14, 15, 28, 41 VIEWSTAR
..... ............
01, 02, 03, 04, 34, 83 REMBRANDT
.... .........................
ZENITH
HAMLIN 14, 15, 28, 41
01, 42, 44
.......
JERROLD
01, 02, 03,
04, 34, 83
DIRECT BRO ADCAST SYSTEM CO DES
...........
.........................
.......................
98
MAGNAVOX
94,95
RCA
97
SONY
3
Press the MUTE button.
4
W ithin 30 seconds, press the CABLE/DBS button.
Setting the Remote to Operate a Cable Box/DBS (cont’d) 21
EJECT
5
POWER
6
STATUS
MENU
CLEAR
FM
/EXIT
W ithin 30 seconds, press the Num ber buttons to enter
the two-digit code for your Cable Box/DBS. For example, if
you have a Zenith Cable Box, press Number buttons 0, 7.
1
4
7
2
5
8
3
6
9
5
SLEEP/
WAKE UP
ALT.CH
0
REC
PAUSE
/STILL
6
/OTR
PLAY
Repeat step 1. If the remote control works your Cable
Box/DBS, you’re finished. If the remote control still doesn’t work
your Cable Box/DBS, repeat steps 2-5, using a different code for
your brand, if available.
REW
F.FWD
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
Helpful Hints
• Although the remote control that
comes with your TV/VCR will work
most Cable Boxes and DBSs, it is
possible that the remote control will
not operate your Cable Box or DBS.
• The remote control may only operate
some features of your Cable Box or
DBS. For example, some Cable Boxes
may only be turned on at the Cable
Box. Therefore, the remote control
will not turn on the Cable Box.
• Press the CABLE/DBS button before
pressing any buttons to operate the
Cable Box/DBS.
• If you had to program the remote
control to operate your Cable Box or
DBS here, whenever you replace the
batteries in the remote control, you
will have to program the remote con-
trol again. Write down the code you
used for future reference.
There is no guarantee
that the rem ote control
will work your Cable
Box or DBS.
22 Front Panel
Cassette Com partm ent
Insert a video cassette tape here.
F.FW D Button (Fast Forward)
When tape playback is stopped,
press to fast forward the tape at high
speed. During playback, press to fast
forward the tape while the picture
stays on the screen. Press to change
a setting of a menu item (for exam-
ple, to adjust the BRIGHTNESS) or
to advance to the next menu.
PLAY Button
Press to play a tape. Details are on
page 29. Press to release Slow, Search
or Still mode and return to normal
playback. Details are on page 46. Press
to select an item in the menu.
REW (ind) Button
When tape playback is stopped, press
to rewind the tape at high speed.
During playback, press to rewind the
tape while the picture stays on the
screen. Press to change a setting of a
menu item (for example, to adjust
the BRIGHTNESS) or to return to a
previous menu.
STOP
EJECT
REW
PLAY
F.FWD
REC
OTR
CHANNEL
VOLUME
POWER
AUDIO
VIDEO
EARPHONE
EARPHONE Jack
Connect earphones (not supplied) here for
personal listening.
VOLUME o/p Buttons
Press to adjust the sound
level. Press the CHANNEL o
button and the VOLUME p
button on the TV/VCR at the
sam e tim e to display or
remove the main menu.
AUDIO In Jack
Connect this jack to the audio out jack of a cam-
corder, DVD Player, VCR, etc. Details are on page 32.
VIDEO In Jack
(Pressing CHANNEL o and
VOLUME p will only access
or remove the main menu,
not later menus. To remove
all menus, press the REW(ind)
button as often as necessary
to return to the main menu,
then press the CHANNEL o
and VOLUME p buttons to
remove the main menu.)
Connect this jack to the video out jack of a camcorder,
DVD Player, VCR, etc. Details are on page 32.
STOP/EJECT Button
Press once to stop the tape. When playback is stopped, press
to eject the tape. Press to select an item in the menu.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 30. Press
repeatedly to start a One-Touch Recording (an immediate
timed recording, 30 minutes to eight hours long) of the
channel you are watching. Details are on page 31.
Record Light
This light appears during a recording. It flashes slowly when the
TV/VCR power is off for a timer recording. It blinks rapidly when a
recording is paused; when the power is off for a timer recording but
there is no tape in the TV/VCR; or when the TV/VCR power is on
and a timer recording is set to begin within two minutes.
POW ER Button
Press to turn the power on
or off.
W ireless Rem ote Sensor
Receives a signal from your remote control so you can operate the
TV/VCR from a distance.
CHANNEL o/p Buttons
Press to scan through the TV/VCR’s memorized channels. During tape playback, press to adjust the track-
ing. Details are on page 57. Press the CHANNEL o button and the VOLUME p button on the TV/VCR at
the sam e tim e to display the main menu. Press again to remove the main menu.
Rear Panel 23
CCC134
ANT.
ANT(enna) Jack
Connect your antenna or cable here.
Details are on page six.
Antenna Hole
Connect the stem of an indoor antenna
here. Details are on page six.
AC Power Cord
Connect to a standard AC outlet to
supply power to the TV/VCR.
24 Remote Control Buttons
POW ER Button
Press to turn on or off the TV/VCR, Cable Box, or Direct Broadcast System.
(You must first press the COMBI or CABLE/DBS button.) Details are on
pages five and 20-21.
EJECT Button
Press to eject the tape.
MENU Button
Press to display the main menu. You also may use the buttons on the front
panel of the TV/VCR to access the main menu. Details are on page 22.
EJECT
MENU
Num ber Buttons
POWER
CLEAR
Use to select channels and to program TV/VCR functions (such as setting
the clock).
STATUS
/EXIT
FM
GGGCable Users
1
4
7
2
5
8
3
6
9
Enter channel numbers as a two-digit number for the quickest results. For
example, to select channel 6, press 0,6. If you only press the Number 6 button,
channel 6 will be selected after a brief delay. (There also may be a brief delay
when you select channels 10, 11, and 12.) If you want to select channels 100
and above, enter channel numbers as a three-digit number. For example, to
select channel 117, press 1, 1, 7.
SLEEP/
WAKE UP
ALT.CH
0
GGGAntenna Users
REC
PAUSE
/STILL
Enter channel numbers as a two-digit number for the quickest results. For
example, to select channel 5, press 0,5. If you only press the Number 5 button,
channel 5 will be selected after a brief delay. You may only select channels 2-69.
/OTR
PLAY
REW
F.FWD
SLEEP/W AKE UP Button
Press to set the Sleep Timer. Details are on page 52. Press to set the
Wake Up Timer. Details are on page 53.
STOP
MUTE
CH.
VOL.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately before
switching to your current channel.
CABLE
/DBS
SMART
PICTURE
COMBI
PLAY/G Button
SPEED MEMORY VCR PLUS+
Press to play a tape. Details are on page 29. Press to release Slow, Search or
Still mode and return to normal playback. Details are on page 46. Press to
select an item in the menu.
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
CH(annel) o/p Buttons
Press to scan through the channels at the TV/VCR or the Cable Box/DBS.
When in FM mode, press to select an FM radio station. Details are on page 59.
INDEX
SKIP
SEARCH
SPEED Button
Press to select the recording speed (SP or SLP).
F(ram e). ADV(ance) Button
Press when in Still mode to advance the picture one frame at a time. Details are
on page 46.
TRACKING o/p Buttons
Press during tape playback to adjust the tracking. Details are on page 57.
INDEX SEARCH Button
Press to fast forward or rewind to the starting points of programs that you
have recorded on a tape. Details are on page 61.
SKIP SEARCH Button
Press during playback to fast forward past 30 seconds of the tape. Press up to
six times in a row to skip up to three minutes of the tape.
SLOW Button
During tape playback, press to view the picture in slow motion. Details are on
page 46.
SMART PICTURE Button
Press repeatedly to select a SmartPicture mode. Details are on page 58.
Remote Control Buttons (cont’d) 25
FM Button
Press to select FM radio mode. Press again to return to TV mode.
Details are on page 59.
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 42.
STATUS/EXIT Button
Press to access or remove the status display. Details are on page
28. Press to remove the menu.
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
REC(ord)/O TR Button
FM
Press once to start a recording. Details are on page 30. Or, press
repeatedly to start a One-Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of the channel you are
watching. Details are on page 31.
1
4
7
2
5
8
3
6
9
REW (ind)/{ Button
When tape playback is stopped, press to rewind the tape at high
speed. During tape playback, press to rewind the tape while the
picture stays on the screen. Details are on page 46.
Press to change a setting of a menu item or to return to a previ-
ous menu.
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
STO P/G Button
Press to stop the tape. Press to select an item in the menu.
REW
F.FWD
STOP
MUTE
MUTE Button
Press to eliminate the TV/VCR’s sound. Press again to return to
the previous volume level.
CH.
VOL.
CO MBI Button
Press to operate the TV/VCR.
CABLE
/DBS
SMART
PICTURE
COMBI
CABLE/DBS Button
Press to operate the Cable Box or Direct Broadcast System.
SPEED MEMORY VCR PLUS+
MEMO RY Button
F.ADV
SLOW
ENTER
Press to memorize a tape position at which you set the real-time
counter to 0:00:00. Details are on page 42. Or, press to memorize
the start and end positions on a tape when setting up A-B Repeat
Play. Details are on pages 44-45.
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
VAR(iable). SLO W Buttons
During slow motion tape playback, press to vary the playback speed
from 1/6 to 1/30 of normal speed. Details are on page 46.
VCR PLUS+/ENTER Button
Press to set a timer recording with the VCR Plus+ programming sys-
tem. Details are on pages 38-41.
VO L(um e) o/p Buttons
Press to adjust the sound level. If you press the VOL(ume) o/p
buttons when the sound is muted, the sound will be restored.
F.FW D/B Button
When tape playback is stopped, press to fast forward the tape at
high speed. During tape playback, press to fast forward the tape
while the picture stays on the screen. Details are on page 46.
Press to change the setting of a menu item or to go to the next
menu.
Helpful Hints
• Press the COMBI button before
pressing other TV/VCR buttons; press
the CABLE/DBS button before press-
ing other Cable Box/DBS buttons.
• The buttons with a shaded descrip-
tion also may operate features of
your Cable Box/DBS.
PAUSE/STILL Button
During recording, press to temporarily stop the recording. Press
again to resume recording. Details are on page 30. You cannot
pause a One-Touch Recording.
During tape playback, press to freeze the picture. Press again to
resume playback. Details are on page 46.
26 Adjusting the Picture Controls
Follow these steps to adjust the TV/VCR’s brightness, picture,
color, tint, and sharpness.
4 2,3
1
EJECT
MENU
Press the CO MBI button, then press the MENU button.
POWER
STATUS
CLEAR
FM
/EXIT
TO ADJUST PRESS { /
B
1
1
4
7
2
5
8
3
6
9
>
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
2
REW
F.FWD
Press the PLAY/G button or the STO P/G button to select
the desired control (BRIGHTNESS, for exam ple).
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
3
Press the REW (ind)/{ button or the F.FW D/B button to
adjust the picture control. (Refer to the chart on page 27.)
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
4
SEARCH
W hen you finish, press the STATUS/EXIT button.
Helpful Hints
• The menus on page 27 will disap-
pear if you do not make adjustments
within 60 seconds.
• The original settings will probably
give you the best picture quality. To
set the picture controls to the origi-
nal settings, see page 58.
Adjusting the Picture Controls (cont’d) 27
Decrease
decreased brightness
decreased contrast
paler
Increase
increased brightness
increased contrast
more brilliant
more green
BRIGHTNESS
PICTURE
CO LO R
TINT
SHARPNESS
more purple
softer
clearer
Press the REW(ind)/{
button to decrease a
picture control. Press
the F.FWD/B button
to increase a picture
control.
STOP
EJECT
REW
PLAY
F.
CHANNEL
VOLUME
POWER
AUDIO
VIDEO
EARPHONE
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
>
BRIGHTNESS
PICTURE
COLOR
>
PICTURE
COLOR
>
TINT
TINT
SHARPNESS
CHANNEL
SHARPNESS
CHANNEL
TO ADJUST PRESS{ /
B
TO ADJUST PRESS { /
B
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
CHANNEL
>
>
Press the STOP/G
button
Press the PLAY/G
button
28 On-Screen Status Displays
A status display will appear when you press the STATUS/EXIT
button or certain function buttons. The contents of the status dis-
play will vary. To choose the status display mode, follow the steps
below.
If you select STATUS O N, then select CO UNTER O NLY
O FF:
G Whenever you press the STOP/p button or the PLAY/o but-
ton, the status display will appear for five seconds. Portions of
the status display also may appear when you press other func-
tion buttons.
If you select STATUS O N, then select CO UNTER O NLY
O N:
Current
Tape
Channel
Time
Function
12:00 AM
CH10
STOP
G Whenever you press the PLAY/o button, the status display will
appear for five seconds. After five seconds, only the counter will
remain on the screen. Portions of the status display also may
appear when you press other function buttons.
If you select STATUS O FF:
G The status display will not appear when you press function but-
tons. You must press the STATUS/EXIT button to see the sta-
tus display.
SLP
M 1:23:45
Counter
and
Counter
Memory
Tape
Speed
1
Press the CO MBI button, then press the MENU button.
2
Press the PLAY/G button or the STO P/G button to select
VCR SETUP, then press the F.FW D/B button.
3
Press the PLAY/G button or the STO P/G button to select
O N-SCREEN MO DE, then press the F.FW D/B button.
4
Press the PLAY/o button or the STO P/p button to select
STATUS, then press the F.FW D/B button so that O N or
O FF appears beside STATUS.
ON-SCREEN MODE
> STATUS
[ON]
[OFF]
COUNTER ONLY
SELECT KL CHOOSE
B
TO END PRESS EXIT
5
If you set STATUS to O FF, go to step 6. If you set STA-
TUS to O N, press the PLAY/o button or the STO P/p
button to select CO UNTER O NLY, then press the
F.FW D/B button so that O N or O FF appears beside it.
Helpful Hint
• You cannot view closed captions
during recording or tape playback if
COUNTER ONLY is ON. Details are
on pages 54-55.
6
Press the STATUS/EXIT button.
Playing 29
Follow the steps below to play a tape.
Insert a tape in the TV/VCR.
1
5
1
Insert a tape in the TV/VCR. The power will come on. If the
tape’s record tab is missing, playback should start automatically.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
1
4
7
2
5
8
3
6
9
2
If playback does not start autom atically, press the CO MBI
button, then press the PLAY/G button to start playback.
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
4
3
PLAY
2
REW
F.FWD
3
Press the STO P/G button to stop playback.
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
4
COMBI
Press the REW (ind)/{ button to rewind the tape.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
5
TRACKING
VAR.SLOW
Press the EJECT button to rem ove the tape.
INDEX
SKIP
SEARCH
S-VHS Quasi Play Back (SQPB)
SQPB allows you to view a tape recorded in S-VHS format. An S-
VHS format tape will play the same as a normal format tape. This
unit detects whether the tape is in S-VHS format or normal format.
Helpful Hints
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
COMBI button, then press the
PLAY/G button.
• Playback features and options are
on pages 42-46.
• When you play an S-VHS format
tape, you can not get the high reso-
lution that would be available on an
S-VHS VCR. Noise lines (black and
white streaks) may appear in the
picture.
30 Recording
Read and follow the steps below to record a TV program.
1
1
Press the COMBI button, then place a tape with its record
tab intact (see page five) in the TV/VCR. The power will come
on. Or, if the tape is already in the TV/VCR, press the
POW ER button to turn on the TV/VCR, if necessary.
EJECT
MENU
POWER
STATUS
/EXIT
CLEAR
FM
1
4
7
2
5
8
3
6
9
2
3
2
Press the SPEED button until the desired tape speed
appears on the TV/VCR screen. See tape speed details below.
SLEEP/
WAKE UP
ALT.CH
0
5
4
6
1
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
3
STOP
MUTE
o
p
Use the CH(annel)
/
buttons or the Num ber buttons
CH.
VOL.
to select the channel you want to record. You can not change
channels during recording.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
4
F.ADV
SLOW
ENTER
Press the REC(ord)/O TR button once to start recording.
The Record light will glow.
TRACKING
VAR.SLOW
INDEX
SKIP
G If there is not a tape in the TV/VCR, NO CASSETTE flashes on
the screen briefly.
SEARCH
G If the tape does not have a record tab, PROTECTED CAS-
SETTE CANNOT RECORD flashes on the screen briefly. The
TV/VCR will eject the tape. Insert another tape.
5
To pause the recording (for exam ple, during com m er-
cials), press the PAUSE/STILL button. The Record light will
flash. To resum e recording, press the PAUSE/STILL but-
ton again or the REC(ord)/O TR button. The Record light
will glow.
Helpful Hints
6
• You cannot record one channel
while watching another.
• Recording options are on pages
31-41.
• You cannot record if DEFEAT
RECORDING is ON. (REC DEFEAT-
ED will flash on the screen.) Details
are on page 33.
To stop recording, press the STO P/G button.
Tape Speeds
This chart shows the recording/playback time for three types of
video cassettes (T160, T120, and T60). There are three playback
speeds: SP, LP, and SLP. A tape will play only in the speed in which
it was recorded. You cannot record in LP speed on this TV/VCR.
When recording, change the tape speed using the SPEED button.
• If you pause a recording for more
than five minutes, the TV/VCR will
switch to Stop mode automatically
to protect the video cassette tape
from damage.
• You can change the tape speed
with the SPEED button while a
recording is in progress, but some
distortion may appear on the tape.
Cassette type / Playback Time
Tape Speed
SP(Standard Play)
T160
2 hrs.
40 mins.
5 hrs.
T120
T60
2 hrs.
1 hr.
LP(Long Play)
(playback only)
4 hrs.
6 hrs.
2 hrs.
3 hrs.
20 mins.
SLP(Super Long Play)
8 hrs.
One-Touch Recording 31
A One-Touch Recording (OTR) is an immediate timed recording
from 30 minutes to eight hours long.
Before you begin, make sure:
G Channels are set. Details are on page 10.
Press the STOP/EJECT but-
ton on the TV/VCR to stop
the OTR.
G There is a tape in the TV/VCR. The record tab must be intact.
4
EJECT
POWER
1
STATUS
MENU
CLEAR
FM
/EXIT
o
p
Press the CO MBI button, then use the CH(annel)
/
buttons or the Num ber buttons to select the channel you
want to record.
1
4
7
2
5
8
3
6
9
1
SLEEP/
WAKE UP
ALT.CH
2
0
Press the SPEED button until the desired recording speed
(SP or SLP) appears on the screen. Details are on page 30.
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
3
2
STOP
MUTE
3
CH.
VOL.
Press the REC(ord)/OTR button repeatedly until the desired
recording length appears in the upper right corner of the screen.
Recording will begin immediately. The Record light will appear.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
OTR
CH12
LENGTH 0:30
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
LENGTH
CANCEL
:
:
PRESS OTR
PRESS CLEAR
4
To stop an O TR before recording is finished, press the
STO P/EJECT button on the TV/VCR.
O r, press the REC(ord)/O TR button, then press the
CLEAR button, then press the STO P/GGbutton on the
rem ote control.
If the end of a tape is reached during an OTR, recording will stop.
The TV/VCR will turn itself off and eject the tape. The Record light
will flash rapidly.
Helpful Hints
• To check the time remaining for an
OTR, press the STATUS/EXIT button.
• To change the recording length while
an OTR is in progress, press the
REC(ord)/OTR button until the
desired recording length appears on
the screen.
The TV/VCR will turn off at the end of the OTR.
• You can not pause an OTR.
• To cancel an OTR but continue
recording, press the REC(ord)/OTR
button, then press the CLEAR button.
• You cannot record if DEFEAT
RECORDING is ON. Details are on
page 33.
• You can change the tape speed with
the SPEED button while a recording is
in progress, but some distortion may
appear on the tape.
32 Rerecording (Tape Duplication)
AUDIO and VIDEO OUT Jacks on source unit
(VCR, DVD Player, or Camcorder)
STOP
EJECT
REW
AUDIO
VIDEO
EARPHONE
VIDEO AUDIO
OUT
Audio Cable from
AUDIO OUT to AUDIO In
Video Cable from
VIDEO OUT to VIDEO In
AUDIO and VIDEO In
Jacks on TV/VCR
1
Make the connections shown above, using audio and video
cables (not supplied). Make sure the source unit (VCR, DVD
Player, cam corder, etc.) is connected to a power source.
2
The source unit will play your tape. Insert a prerecorded tape
in the source unit. If playback begins, press the STOP button on
the unit.
3
The TV/VCR will record your tape. Insert a blank tape in the
TV/VCR. Make sure the tape’s record tab is intact. The TV/VCR
power will turn on automatically.
4
Point the TV/VCR rem ote control at the TV/VCR. Press
the CO MBI button, then press Num ber buttons 0, 0 so
that A/V IN appears on the screen.The TV/VCR is now in
Line Input mode.
5
Point the TV/VCR rem ote control at the TV/VCR. Press
the SPEED button until the desired tape speed (SP or
SLP) appears on the screen.
Helpful Hints
• Unauthorized recording of copy-
righted television programs, video
tapes, or other materials may
6
infringe on the rights of copyright
owners and violate copyright laws.
• If a program has copyright protec-
tion, it may not record clearly.
Press the PLAY button on the source unit and the
REC(ord)/O TR button on your TV/VCR at the sam e tim e.
Copying will begin.
• Different brands of equipment may
operate differently.
• Make sure all connections are
secure. Otherwise, you may not
record both picture and sound.
7
To stop copying, press the STO P/EJECT button on the
TV/VCR, then stop the tape on the source unit.
Defeat Recording 33
Follow the steps below to prevent accidental recording.
4 2-3
1
EJECT
POWER
Press the CO MBI button, then press the MENU button.
STATUS
MENU
CLEAR
FM
/EXIT
1
1
4
7
2
5
8
3
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REMINDER
SLEEP/
BRIGHTNESS
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
2
REW
F.FWD
Press the PLAY/G button or the STO P/G button to select
VCR SETUP, then press the F.FW D/B button.
STOP
MUTE
CH.
VOL.
VCR SETUP
CABLE
/DBS
SMART
PICTURE
COMBI
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
SPEED MEMORY VCR PLUS+
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
SELECT KL CHOOSE
B
TO END PRESS EXIT
INDEX
SKIP
SEARCH
3
Press the PLAY/G button or the STO P/G button to select
DEFEAT RECO RDING, then press the F.FW D/B button
so that O N appears beside DEFEAT RECO RDING.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
> DEFEAT RECORDING [ON]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
Helpful Hints
SELECT KL CHOOSE
TO END PRESS EXIT
B
• You can not set DEFEAT RECORD-
ING to ON while a recording is in
progress.
• If you set DEFEAT RECORDING to
ON after a timer recording has been
set, the timer recording will not occur.
The TV/VCR will not remind you of
the timer recording as described on
page 36.
• You can not program a timer record-
ing if DEFEAT RECORDING is ON.
• To set DEFEAT RECORDING to OFF,
repeat steps 1-2 above. At step 3,
press the PLAY/o button or the
STOP/p button to select DEFEAT
RECORDING, then press the
F.FWD/B button so that OFF
appears beside DEFEAT RECORD-
ING. Press the STATUS/EXIT
button.
4
Press the STATUS/EXIT button.
5
Now, REC DEFEATED will flash on the screen when you
press the REC(ord)/O TR button.
REC DEFEATED
34 Timer Recording
Follow the steps below to program the TV/VCR to record TV
programs while you’re away from home. The TV/VCR will turn
itself on, record, and turn itself off automatically. Before you begin,
make sure:
G The clock is set. If not, CLOCK MUST BE SET appears, fol-
lowed by the SET CLOCK menu. Details are on pages 12-17.
G Channels are set. Details are on page 10.
2-3
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
G A tape is in the TV/VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program.
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay start again at step 1.
1
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
1
REW
F.FWD
Press the CO MBI button, then press the MENU button.
STOP
MUTE
CH.
VOL.
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
CABLE
/DBS
SMART
PICTURE
COMBI
REMINDER
SPEED MEMORY VCR PLUS+
BRIGHTNESS
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
2
SEARCH
Press the PLAY/G button or the STO P/G button to select
VCR PRO GRAM, then press the F.FW D/B button.
VCR PROGRAM
> ONCE
DAILY(MON-FRI)
WEEKLY
PROGRAM REVIEW
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/G button or the STO P/G button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press
the F.FW D/B button.
Helpful Hints
• With ShowGuard, you don’t have to
worry about losing your timer
G O NCE: The TV/VCR will record a TV program on any day you
choose, up to 12 months away.
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place dur-
ing the power failure.
G DAILY: The TV/VCR will record every day from Monday to
Friday – starting at the same time and recording the same channel
for the same length of time.
G W EEKLY: The TV/VCR will record the same channel on the
same day, at the same time, and for the same length of time
every week.
DAILY PROGRAM (MON-FRI)
PROGRAM -1 2 3 4 5 6 7 8-
Daily
Recording
(exam ple)
SELECT PROGRAM NUMBER
TO END PRESS EXIT
• You cannot set a timer recording if
DEFEAT RECORDING is ON.
Details are on page 33.
Timer Recording (cont’d) 35
4
4-7
Use the Num ber buttons (1-8) to select a position in
which to store the tim er recording. Flashing numbers indi-
cate an open position (one in which a timer recording has not
been stored yet).
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
NOTE: If you select a number that already has been used to store a
timer recording, PREVIOUSLY SET PROGRAM will appear on the screen
for a few seconds. Then information about the program in that position
will appear on the screen. If this happens, press the STATUS/EXIT but-
ton. Then use the Number buttons to select another position.
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
5
PLAY
Use the Num ber buttons to enter the channel of the TV
program you want to record.
G If you are recording from line input, press 0, 0. A/V IN will
appear on the screen.
REW
F.FWD
STOP
MUTE
CH.
VOL.
G If you are recording using a Cable Box, enter the Cable Box
output channel (03 or 04). Be sure to select the channel of the
TV program at the Cable Box and leave the Cable Box on for
the timer recording.
CABLE
SMART
PICTURE
COMBI
/DBS
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
ONE TIME PROGRAM
TRACKING
VAR.SLOW
INDEX
SKIP
PROGRAM
1
SEARCH
CHANNEL – – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
6
Press two Num ber buttons for the hour(s) you want the
recording to begin. Press two Num ber buttons for the
m inute(s) you want the recording to begin. Press 1 for
AM or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
– – : – –
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
7
Follow the instructions in step 6 to set the recording’s
stop tim e. (AM or PM will be set automatically.)
• If you enter numbers that do not
match the TV/VCR’s clock or calen-
dar, the entry will be rejected and a
question mark will appear on the
screen.
• To make corrections while you are
programming a timer recording, press
the CLEAR button until the cursor is
flashing on the item you want to
change. Then enter the correct infor-
mation.
ONE TIME PROGRAM
PROGRAM
1
CHANNEL 10
TIME ON
TIME OFF – – : – –
09:30 PM
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Instructions continue on page 36.
36 Timer Recording (cont’d)
8
11
Press the Num ber 1 button to record in SP speed or
press the Num ber 2 button to record in SLP speed. Details
about tape speed are on page 30. You cannot use the SPEED button
at this time.
EJECT
MENU
POWER
STATUS
/EXIT
CLEAR
FM
10
8
ONE TIME PROGRAM
1
4
7
2
5
8
3
6
9
PROGRAM
1
9
CHANNEL 10
TIME ON
TIME OFF 11:00 PM
REC SPEED SLP
SP=1 SLP=2
09:30 PM
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
REW
F.FWD
STOP
MUTE
CH.
VOL.
9
Press two Num ber buttons for the m onth and two
Num ber buttons for the day you want the program to
record. For example, for July 10, 2001, press 07, 10. The day of
the week and the year will appear automatically. (You cannot pro-
gram the TV/VCR to record more than one year in advance.)
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
ONE TIME PROGRAM
INDEX
SKIP
SEARCH
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
10
09:30 PM
11:00 PM
SLP
Turn off the TV/VCR
for the recording.
Insert a tape in
the TV/VCR.
START DATE 07/10/2001
TUESDAY
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Leave the Cable
Box/DBS on
(if applicable).
10
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
G If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
G If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
Helpful Hints
• PROGRAM NOT COMPLETED /
CLASH may appear on the screen
when you finish setting a timer
recording. This means the timer
recording you just tried to program
overlaps with another timer recording.
The latest timer recording will not
occur.
G If PROGRAM NOT COMPLETED appears, start again at step 1.
11
Press the PO W ER button to turn off the TV/VCR power.
The Record light will flash slowly if a tape is in the TV/VCR.
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts. The Record light will blink rapidly
until you turn off the power for the recording.
• To stop a timer recording that is in
progress, press the STOP/EJECT but-
ton on the TV/VCR once.
Please see page 62 for more
Helpful Hints.
Timer Recording (cont’d) 37
Checking or Clearing Tim er Recordings
5 2-4
1
W ith the TV/VCR on, press the CO MBI button, then
press the MENU button.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
1
2
1
4
7
2
5
8
3
6
9
Press the PLAY/G button or the STO P/G button to select
VCR PRO GRAM, then press the F.FW D/B button.
SLEEP/
WAKE UP
ALT.CH
0
3
REC
PAUSE
/STILL
/OTR
PLAY
Press the PLAY/G button or the STO P/G button to select
PRO GRAM REVIEW , then press the F.FW D/B button.
The timer recording information for the program in the lowest
numbered position will appear on the screen. If no timer record-
ings are programmed, nothing will happen when you select PRO-
GRAM REVIEW and press the F.FWD/B button.
REW
F.FWD
STOP
MUTE
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
4
Press the F.FW D/B button to display inform ation about
the next tim er recording. (If you do not press a button within
10 seconds, information about the next timer recording will
appear automatically.) This will continue until all positions have
been displayed. Then, the menu will disappear. You can exit the
Program Review at any time by pressing the STATUS/EXIT but-
ton.
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
5
To cancel the tim er recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1-4 to m ake sure you cleared the correct
recording.
Helpful Hint
• With ShowGuard, you don’t have to
worry about losing your timer
recordings. If the power fails, timer
recordings will be restored when the
clock is reset. (The clock will reset
itself automatically if you are using
AUTO CLOCK. Details are on pages
14-17. If you are not using AUTO
CLOCK, reset the clock manually.
Details are on pages 12-13.) The
timer recording will not occur only if
it was scheduled to take place dur-
ing the power failure.
38 Setting Up the VCR Plus+ Programming System
1
First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR
Plus+ programming system to work properly.
Since the channel numbers of the stations you receive may not be the same as the station numbers, and
since channel numbers differ from area to area, you must program the TV/VCR with your local channel
information. To fill in the boxes, you will need 1) a cable channel line-up list, if applicable (you can request
one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in
your TV guide or the TV listings of your local newspaper.
NO TE: If you are using a Cable Box/DBS, the Cable/TV channel m ust be 03 or 04 (the Cable
Box/DBS output channel) for every VCR Plus+ channel.
TV Channels
TV Channels
Station
Call Letters
Station
Call Letters
VCR PLUS+ CH.
VCR PLUS+ CH.
CABLE/TV CH.
CABLE/TV CH.
Setting Up the VCR Plus+ Programming System (cont’d) 39
Examine the lists on
page 38.
2
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must
tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
7
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
G Make each entry within 60 seconds of the previous entry.
3
1
4
7
2
3
6
9
5
8
3
6
Press the CO MBI button, then press the MENU button.
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
4
Press the PLAY/G button or the STO P/G button to select
VCR SETUP, then press the F.FW D/B button.
REW
F.FWD
STOP
MUTE
CH.
VOL.
5
CABLE
SMART
PICTURE
COMBI
/DBS
Press the PLAY/G button or the STO P/G button to select
VCR PLUS+ REF. MAP, then press the F.FW D/B button.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
VCR PLUS+ CROSS REF. MAP
VCR PLUS+
124
CABLE/TV
– – –
TRACKING
VAR.SLOW
125
– – –
INDEX
SKIP
01 – – – –
02
03
B
– – –
– – –
– – –
SEARCH
TO SELECT CH PRESS GG
THEN ENTER CH NO.
TO END PRESS EXIT
6
Look at the lists you filled in on page 38. For stations whose
VCR Plus+ and Cable/TV channels do not m atch, press
the PLAY/G button or the STO P/G button until the
arrow is beside the VCR Plus+ channel you need. Then,
press the Num ber buttons to enter the corresponding
Cable/TV channel from your list. Continue this process until
you have entered all the stations on your list.
4-6
Note: If you are using a Cable Box/DBS, the Cable/TV channel will
be 03 or 04 (the Cable Box/DBS output channel) for every VCR
Plus+ channel. You must set the Cable Box/DBS to the channel
you want to record; leave the Cable Box/DBS on for the timer
recording.
Helpful Hints
• To correct a Cable/TV channel num-
ber, repeat the steps on this page.
• To clear a Cable/TV channel num-
ber, repeat steps 3-5 on this page.
Then, press the CH(annel) o/p
buttons to select it. Press the CLEAR
button, then press the
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124
– – –
– – –
23
– – –
– – –
125
01 – – – –
02
03
B
TO SELECT CH PRESS GG
TO DELETE PRESS CLEAR
TO END PRESS EXIT
STATUS/EXIT button.
• To select line input for the Cable/TV
channel, press 0,0. A/V IN will
appear on the screen.
7
Press the STATUS/EXIT button.
40 Timer Recording With the VCR Plus+ Programming System
Follow the steps below to program a timer recording using the
PlusCode programming numbers in your TV guide. Before you
begin, make sure:
G The clock is set. If not, CLOCK MUST BE SET appears.
G Channels are programmed.
G There is a tape in the TV/VCR. Make sure the tape’s record tab
EJECT
POWER
is intact and the tape is long enough to record the program.
STATUS
MENU
CLEAR
FM
/EXIT
G You have completed the steps on pages 38-39.
Com plete each step within 60 seconds of com pleting the
previous step. If you don’t, you m ay return to step 1.
1
4
7
2
5
8
3
6
9
2
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
1
PLAY
Press the CO MBI button, then press the VCR
PLUS+/ENTER button.
REW
F.FWD
3
1
STOP
MUTE
CH.
VOL.
VCR PLUS+ PROGRAM
PLUS CODE : – – – – – – – –
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
TO END PRESS EXIT
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
2
SEARCH
Press the Num ber buttons to enter the PlusCode pro-
gram m ing num ber of the program you wish to record (this
number is different for every program). Finally, press the VCR
PLUS+/ENTER button.
VCR PLUS+ PROGRAM
PLUS CODE : 89687 – – –
TO SET PRESS VCR +
TO CORRECT PRESS CLEAR
TO END PRESS EXIT
Helpful Hints
3
Press the PLAY/G button or the STO P/G button to select
a O NCE, DAILY, O R W EEKLY recording. Then, press the
F.FW D/B button.
• You cannot set a timer recording if
DEFEAT RECORDING is ON. Details
are on page 33.
G O NCE: The VCR will record a TV program once,
G DAILY: The VCR will record every day from Monday to Friday
– starting at the same time and recording for the same length of
time.
G W EEKLY: The VCR will record on the same day, at the same
time, and for the same length of time every week.
• If CODE ERROR flashes after you
enter the PlusCode programming
number and press the VCR
PLUS+/ENTER button, the number
you entered was incorrect (for exam-
ple, too short). If this happens, enter
the correct number.
VCR PLUS+ PROGRAM
• CLASH may flash on the screen after
you complete step 2. This means
that the timer recording you just pro-
grammed and another timer record-
ing overlap, and thus the current
timer recording will not occur.
>ONCE
DAILY (MON - FRI)
WEEKLY
SELECT GG CHOOSE
TO END PRESS EXIT
B
Timer Recording With the VCR Plus+ Programming System (cont’d) 41
4
5
Press the Num ber 1 button to record in SP speed or the
Num ber 2 button to record in SLP speed. Your selection
will appear to the right of REC SPEED on the screen, although
SP=1 SLP=2 will continue to flash. For details about tape speed,
see pages 30 and 64. You cannot use the SPEED button at this
time.
EJECT
MENU
POWER
STATUS
/EXIT
CLEAR
FM
6
1
4
7
2
5
8
3
6
9
4
ONE TIME PROGRAM
PROGRAM
1
CHANNEL
TIME ON
TIME OFF
REC SPEED
09
SLEEP/
WAKE UP
ALT.CH
10:30 PM
11:30 PM
SLP
0
SP=1 SLP=2
START DATE
REC
/OTR
PAUSE
/STILL
04/19/2001
PLAY
THURSDAY
TO END PRESS EXIT
REW
F.FWD
STOP
MUTE
CH.
VOL.
5
Press the STATUS/EXIT button. PROGRAM WAS COM-
PLETED / PLEASE TURN OFF FOR TIMER RECORDING will
appear on the screen.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
G If there is not a tape in the TV/VCR, PLEASE INSERT CAS-
SETTE also appears on the screen.
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
G If there is a tape without a record tab in the TV/VCR, PLEASE
REMOVE CASSETTE also appears on the screen. If this hap-
pens, insert a different tape.
INDEX
SKIP
SEARCH
6
Press the PO W ER button to turn off the TV/VCR power.
The Record light will flash slowly if a tape is in the TV/VCR.
If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR
TIMER RECORDING appears on the TV/VCR screen two minutes
before a timer recording starts. The Record light will blink rapidly
until you turn off the power for the recording.
Helpful Hints
• To exit the VCR Plus+ programming
system at any time, press the STA-
TUS/EXIT button. The display will
disappear from the screen.
• To stop a started timer recording,
press the STOP/EJECT button on
the TV/VCR.
Turn off the TV/VCR for the
recording. Insert a tape in the
TV/VCR. Leave the Cable
Box/DBS on (if applicable).
42 Real-Time Counter Memory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
2
1
Press the CO MBI button. Then, play, fast forward, or
rewind a tape to the location that you would like to refer
to later. Stop the tape.
EJECT
POWER
CLEAR
STATUS
/EXIT
MENU
FM
1
4
7
2
5
8
3
6
9
3
2
SLEEP/
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
01:08 PM
CH10
STOP
PLAY
REW
F.FWD
STOP
MUTE
CH.
VOL.
SLP
1 : 23 : 45
CABLE
SMART
PICTURE
1
4
COMBI
/DBS
SPEED MEMORY VCR PLUS+
3
F.ADV
SLOW
ENTER
W hile the counter rem ains on the screen, press the
CLEAR button to reset the real-tim e counter to zero.
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
0 : 00 : 00
4
W hile the counter rem ains on the screen, press the MEM-
O RY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
1,5
M 0 : 00 : 00
5
Helpful Hints
To go to the tape location where you set the real-tim e
counter to zero, press the REW (ind)/s button or the
F.FW D/B button when playback is stopped. W hen the
tape reaches the point at which you set the counter to
zero, the tape will stop. Press the PLAY/o button to
watch the tape.
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 43.
• You may only set one real-time
counter memory at a time. If you set
the real-time counter to zero at a
second location, the previous real-
time counter to zero setting will be
lost.
Repeat Play 43
Follow the steps below to program the TV/VCR to play a tape
over and over.
4
2-3
EJECT
1
POWER
CLEAR
Press the CO MBI button, then press the MENU button.
STATUS
/EXIT
MENU
FM
1
1
4
7
2
5
8
3
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
SLEEP/
REMINDER
WAKE UP
ALT.CH
BRIGHTNESS
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
2
STOP
MUTE
Press the PLAY/G button or the STO P/G button to select
VCR SETUP, then press the F.FW D/B button.
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
VCR SETUP
COMBI
> ONE TIME PLAY
REPEAT PLAY
[ON]
SPEED MEMORY VCR PLUS+
ON-SCREEN MODE
F.ADV
SLOW
ENTER
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
TRACKING
VAR.SLOW
SELECT KL CHOOSE
B
INDEX
SKIP
TO END PRESS EXIT
SEARCH
3
Press the PLAY/G button or the STO P/G button to select
REPEAT PLAY, then press the F.FW D/B button so that
O N appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
4
• The TV/VCR will stay in Repeat Play
mode until you set ONE TIME PLAY
to ON, even if you turn off the
TV/VCR. To set ONE TIME PLAY to
ON, follow steps 1-2 above. Then,
press the PLAY/o button or the
STOP/p button to select ONE TIME
PLAY. Press the F.FWD/B button so
that ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
Press the STATUS/EXIT button. Now, when a tape finishes
playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
• The real-time counter memory will
not function during Repeat Play
mode.
44 A-B Repeat Play
Follow the steps below to program the TV/VCR to play the mate-
rial between two specified points (A and B) on a tape over and
over again.
Insert a tape in the TV/VCR.
1
2
3-5
1
Insert a tape in the TV/VCR.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
2
Press the CO MBI button, then press the MENU button.
1
4
7
2
5
8
3
6
9
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
SLEEP/
WAKE UP
ALT.CH
0
REMINDER
REC
/OTR
PAUSE
/STILL
BRIGHTNESS
PLAY
REW
F.FWD
STOP
MUTE
3
CH.
VOL.
Press the PLAY/G button or the STO P/G button to select
VCR SETUP, then press the F.FW D/B button.
CABLE
/DBS
SMART
PICTURE
COMBI
VCR SETUP
SPEED MEMORY VCR PLUS+
> ONE TIME PLAY
REPEAT PLAY
[ON]
F.ADV
SLOW
ENTER
ON-SCREEN MODE
TRACKING
VAR.SLOW
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
INDEX
SKIP
SEARCH
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the PLAY/G button or the STO P/G button to select
REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
Helpful Hints
• To cancel A-B Repeat Play, set ONE
TIME PLAY to ON. To set ONE TIME
PLAY to ON, follow steps 2-3 above.
Then, press the PLAY/o button or the
STOP/p button to select ONE TIME
PLAY. Press the F.FWD/B button so
that ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
5
Press the F.FW D/B button repeatedly so that A-B
appears beside REPEAT PLAY.
VCR SETUP
ONE TIME PLAY
> REPEAT PLAY
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
[A-B]
• The end position (B) must be later on
the tape than the start position (A).
SELECT KL CHOOSE
TO END PRESS EXIT
B
A-B Repeat Play (cont’d) 45
6
6
Press the STATUS/EXIT button to rem ove the m enu. A-
B REPEAT will appear on the screen. Beneath it, the letter A will
flash beside the real-time counter.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
1
4
7
2
5
8
3
6
9
A-B REPEAT
0:12:34
SLEEP/
A
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
7
REW
F.FWD
Play, fast forward, or rewind the tape to the position at
which you want to begin playback. Stop the tape, then
press the MEMO RY button to set the start position (A).
The flashing A will become a flashing B.
STOP
MUTE
CH.
VOL.
CABLE
SMART
PICTURE
COMBI
/DBS
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
A-B REPEAT
0:00:00
INDEX
SKIP
B
SEARCH
8
Play or fast forward the tape to the position at which you
want playback to end. Stop the tape, then press the
MEMO RY button to set the end position (B).
G The length of time between the start position (A) and the end
position (B) must be at least three minutes.
7-8
9
The TV/VCR will immediately rewind the tape to the start posi-
tion (A) and repeat playback to the end position (B) over and
over.
(TV programming will appear while the tape is rewinding.)
Helpful Hints
• The counter cannot be memorized
or reset when you are using this
feature.
• A-B REPEAT will not appear on the
screen at step 6 if a tape is not in
the TV/VCR. NO CASSETTE will
flash on the screen briefly.
• You cannot rewind or fast forward
beyond points A or B when you are
using this feature.
• A-B Repeat Play will be retained if
you turn off the TV/VCR power.
However, if you eject the tape or
press the REC(ord)/OTR button, A-B
Repeat Play will be cancelled.
46 Playback Options
Forward and Reverse Searching (SP/LP/SLP)
1
During tape playback, press and release the F.FWD/B button or the
REW(ind)/{ button. A fast forward or reverse picture search will
begin.
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
1
4
7
2
5
8
3
6
9
2
To return to normal playback, press the PLAY/G button.
SLEEP/
WAKE UP
ALT.CH
0
Super High Speed Searching (LP/SLP)
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
1
STOP
MUTE
During tape playback, press the F.FWD/B button or the
REW(ind)/{ button, then press again. The TV/VCR will now search
in super high speed.
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
Press the F.FWD/B button or the REW(ind)/{ button repeatedly
to switch between regular and super high speed searching.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
2
INDEX
SKIP
To return to normal playback, press the PLAY/G button.
SEARCH
Viewing a Still Picture
1
During tape playback, press the PAUSE/STILL button. A still picture
will appear on the screen.
2
To advance the still picture frame-by-frame, press the F(rame).
ADV(ance) button.
Helpful Hints
3
• Slow and Still modes will automati-
cally switch to Stop mode after five
minutes to protect the TV/VCR and
the tape from damage.
• SP/LP/SLP means this feature will
work with tapes recorded in
To release the still picture and return to normal playback, press the
PLAY/G button or press the PAUSE/STILL button again.
Viewing a Slow Motion Picture
Standard Play, Long Play, or Super
Long Play. For details about tape
speed, see page 30.
• LP/SLP means this feature will work
with tapes recorded in Long Play
and Super Long Play. For details on
tape speed, see page 30.
1
During tape playback, press the SLOW button. The tape will play in
slow motion.
NOTE: You can control the speed of slow motion playback by pressing the
VAR(iable). SLOW buttons during slow motion playback.
• During forward and reverse search-
ing, horizontal noise bars will
appear on the TV/VCR screen.
2
To release Slow mode and return to normal playback, press the
PLAY/G button.
Blue Background 47
If you want the TV screen to be solid blue when a weak signal is
received, set BLUE BACKGROUND to ON. The screen will be
blue and the sound will be muted. Or, if you want to receive the
weak signal, set BLUE BACKGROUND to OFF. When you select
a channel that is receiving a weak signal, you will see and hear the
static in the TV programming.
4
2-3
EJECT
POWER
CLEAR
STATUS
/EXIT
MENU
FM
To set BLUE BACKGROUND to ON or OFF, follow the steps
below.
1
1
4
7
2
5
8
3
6
9
1
SLEEP/
WAKE UP
ALT.CH
Press the CO MBI button, then press the MENU button.
0
REC
/OTR
PAUSE
/STILL
PLAY
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REW
F.FWD
STOP
MUTE
REMINDER
BRIGHTNESS
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
2
F.ADV
SLOW
ENTER
Press the PLAY/o button or the STO P/p button to select
VCR SETUP, then press the F.FW D/B button.
TRACKING
VAR.SLOW
INDEX
SKIP
VCR SETUP
SEARCH
> ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/o button or the STO P/p button to select
BLUE BACKGRO UND. Then, press the F.FW D/B button
repeatedly so that O FF (or O N) appears beside BLUE
BACKGRO UND.
VCR SETUP
ONE TIME PLAY
REPEAT PLAY
[ON]
ON-SCREEN MODE
DEFEAT RECORDING [OFF]
> BLUE BACKGROUND [ON]
VCR PLUS+ REF. MAP
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Helpful Hint
Press the STATUS/EXIT button.
• A blue screen may appear briefly
between channel changes if BLUE
BACKGROUND is set to ON. To
avoid having the brief blue screen,
set BLUE BACKGROUND to OFF.
48 SmartLock
SmartLock enables parents to prevent their children from watch-
ing inappropriate material on TV.
EJECT
MENU
POWER
CLEAR
SmartLock reads the ratings for programming (except for news
and sports programs, unedited movies on premium cable channels,
and Emergency Broadcast System signals), then denies access to
programming if the program’s rating meets or exceeds the limita-
tions you select. The ratings are defined on page 51.
To block ratings, follow the steps below.
STATUS
/EXIT
FM
1
1
4
7
2
5
8
3
6
9
3
SLEEP/
WAKE UP
ALT.CH
0
REC
PAUSE
/STILL
/OTR
PLAY
1
REW
F.FWD
Press the CO MBI button, then press the MENU button.
STOP
MUTE
CH.
VOL.
>
SMARTLOCK
REVIEW
PRESS
B
CABLE
EXIT
SMART
PICTURE
COMBI
/DBS
PRIM. SETUP
VCR PROGRAM
VCR SETUP
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
2
SEARCH
Press the PLAY/G button or the STO P/G button to select
SMARTLO CK. Then, press the F.FW D/B button.
SMARTLOCK
_ _ _ _
Enter Your Access Code
2,4
Helpful Hints
3
• If the “Incorrect Access Code...” mes-
sage appears after step 3, enter the
correct access code.
Use the Num ber buttons to enter your access code.
The default code is 0711. If you have not set up your personal
access code, you should use 0711. (To set up your personal
access code, see page 50.)
• Programming may be rated by the
Motion Picture Association of America
(MPAA) or according to the Television
Parental Guidelines. In order to block
any inappropriate programming, set
your limits in both places (Movie
Ratings and Parental Guidelines).
You will complete steps 1-7 twice,
choosing Movie Ratings at step 5 the
first time, then choosing Parental
Guidelines at step 5 the second time.
• You can not view tape playback if the
rating of the tape is blocked.
SMARTLOCK
X X X -
Enter Your Access Code
4
Press the PLAY/G button or the STO P/G button to select
BLO CK. Then, press the F.FW D/B button.
SMARTLOCK
• If you enter the access code once, you
may change channels without seeing
the “CHANNEL XX BLOCKED” mes-
sage again. If you turn off the TV/VCR
power, you will be asked for the
access code again when you tune to a
blocked channel.
> BLOCK
CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
SmartLock (cont’d) 49
5
5-6
Press the PLAY/G button or the STO P/G button to select
Movie Ratings or Parental Guidelines. Then, press the
F.FW D/B button.
EJECT
POWER
BLOCK
STATUS
MENU
CLEAR
FM
/EXIT
> Movie Ratings
Parental Guidelines
1
4
7
2
5
8
3
6
9
7
SELECT KL CHOOSE
TO END PRESS EXIT
B
SLEEP/
WAKE UP
ALT.CH
0
REC
PAUSE
/STILL
/OTR
6
PLAY
Press the PLAY/G button or the STO P/G button to select
the rating you want to block. Then, press the F.FW D/B
button so that O N appears beside the rating.
REW
F.FWD
STOP
MUTE
CH.
VOL.
For example, if you set PG to ON, you may not view PG pro-
gramming because the block is on. Programs with a PG or higher
rating will be blocked. A “CHANNEL XX BLOCKED...” message
will appear when someone tries to access such programming.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
PARENTAL GUIDELINES
MOVIE RATINGS
> TV-Y
TV-Y7
[OFF]
>
- - - - - - - - - - - - - - - -
> G
PG
PG-13
R
NC-17
X
[OFF]
[OFF]
[OFF]
[ON]
[ON]
[ON]
TRACKING
VAR.SLOW
INDEX
SKIP
TV-G
[OFF]
SEARCH
TV-PG
TV-14
TV-MA
>
>
>
SELECT KL CHOOSE
TO END PRESS EXIT
B
SELECT KL CHOOSE
TO END PRESS EXIT
B
G More specific sub-ratings are available for TV-Y7, TV-PG, TV-14,
and TV-MA. (See example below.) When you press the
F.FWD/B button to turn on TV-Y7, TV-PG, TV-14 or TV-MA,
additional sub-ratings will appear.
If you select the rating category, such as TV-PG, and turn it on
or off, the specific sub-ratings, such as V for violence, will turn
on or off automatically. You can always turn specific sub-ratings
on or off by selecting them individually. However, you may only
set a sub-rating to ON if the rating category is set to ON.
G Ratings are defined on page 51.
Helpful Hints
• If the “CHANNEL XX BLOCKED...”
or “PLAYBACK BLOCKED...” message
appears and you want to view this
programming, enter your access code.
The channel/tape will remain blocked
until you enter the correct code.
If you do not know the code, you
must select another channel using the
CH(annel) o/p buttons or press the
STOP/p button to stop tape play-
back.
Exam ple
of specific
sub-ratings
TV-PG
> TV-PG
[ON]
D
L
S
[OFF]
[ON]
[ON]
[OFF]
V
SELECT KL CHOOSE
B
TO END PRESS EXIT
• Ratings will remain blocked even after
a power failure.
• You cannot access the menu when
the “CHANNEL XX BLOCKED...” or
“PLAYBACK BLOCKED...” message
appears.
7
Press the STATUS/EXIT button.
50 SmartLock (cont’d)
To change the access code, follow these steps.
6 3,5
1
Press the CO MBI button, then press the MENU button.
EJECT
MENU
POWER
STATUS
>
SMARTLOCK
REVIEW
CLEAR
FM
PRESS
B
/EXIT
EXIT
1
PRIM. SETUP
VCR PROGRAM
VCR SETUP
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
2
REC
PAUSE
/STILL
/OTR
PLAY
Press the PLAY/G button or the STO P/G button to select
SMARTLO CK. Then, press the F.FW D/B button.
SMARTLOCK
REW
F.FWD
STOP
MUTE
CH.
VOL.
_ _ _ _
CABLE
/DBS
SMART
PICTURE
Enter Your Access Code
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
3
Use the Num ber buttons to enter your old access code.
The default code is 0711. If you have never set up your personal
access code, use 0711 now.
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
After you enter the code, the SMARTLOCK menu will appear.
SMARTLOCK
X X X -
2,4
Enter Your Access Code
Helpful Hints
• In order to protect the privacy of
the access code, an X will appear
on the screen instead of the num-
ber you enter.
• If a “Wrong Code...” message
appears on the screen after you
complete step 5, you entered the
wrong numbers in the Confirm Code
space. Repeat step 5.
4
Press the PLAY/G button or the STO P/G button to select
CHANGE CO DE. Then, press the F.FW D/B button.
SMARTLOCK
BLOCK
> CHANGE CODE
SELECT KL CHOOSE
TO END PRESS EXIT
B
• You cannot use the default code
after you set up your personal
access code.
• If a power failure occurs, the
default code, 0711, will be the
active access code again.
5
Use the Num ber buttons to enter your desired access
code in the New Code space. Then, enter the sam e code
in the Confirm Code space.
• If you connect the power cord to an
AC outlet that is controlled by a wall
switch, your personal access code
will be erased every time you turn
off the power at the wall switch.
The default code will be the active
code again.
Your new access code should be recorded. You will return to the
SMARTLOCK menu.
_ _ _ _
New Code
Confirm Code
_ _ _ _
6
Press the STATUS/EXIT button.
SmartLock (cont’d) 51
To check the SmartLock settings and see which ratings you have
blocked, follow these steps.
3
1
Press the CO MBI button, then press the MENU button.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
>
REVIEW
PRESS
B
EXIT
1
1
4
7
2
5
8
3
6
9
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
2
Press the PLAY/G button or the STO P/G button to select
REVIEW . Then, press the F.FW D/B button so that the
Sm artLock settings appear.
REW
F.FWD
2
STOP
MUTE
CH.
VOL.
Ratings that are blocked will appear on the screen.
An “X” will appear if a specific sub-rating is blocked, such as V for
Violence in the TV-14 category.
CABLE
SMART
PICTURE
COMBI
/DBS
SPEED MEMORY VCR PLUS+
BLOCKED RATINGS
Movie Ratings
F.ADV
SLOW
ENTER
G
PG-13
NC-17
Parental Guidelines
TV-Y7
TRACKING
VAR.SLOW
- - - - - - - - - - - - - - - - - - - -
TV-G
INDEX
SKIP
D
L
S
x
x
x
V
x
SEARCH
TV-PG
TV-14
TV-MA
x
–
x
x
x
x
3
Press the STATUS/EXIT button.
RATING EXPLANATIO NS
For Movie Ratings
• G - General Audience
• PG - Parental Guidance suggested.
• PG-13 - Unsuitable for children under 13
• R - Restricted; under 17 requires accompanying parent or adult
guardian
• NC-17 - No one under 17 admitted
• X - Mature audience only
For Parental Guidelines
• V - Violence
• S - Sexual situations
• L - Language
• D - Inappropriate dialogue
• FV - Fantasy Violence may frighten children under seven; TV-Y7
category only. Some cartoons may have this rating.
• TV-Y - Appropriate for all children
• TV-Y7 - Appropriate for children seven and older
• TV-G - General Audience
• TV-PG - Parental Guidance suggested.
• TV-14 - Unsuitable for children under 14
• TV-MA - Mature audience only
52 Sleep Timer
Use the sleep timer to program the TV/VCR to shut off in a cer-
tain amount of time.
3
1
Press the CO MBI button, then press the SLEEP/W AKE
UP button.
EJECT
POWER
CLEAR
STATUS
/EXIT
MENU
FM
TO ADJUST PRESS { /
B
1
4
7
2
3
6
9
–TIMER–
5
8
>
SLEEP
WAKE UP
ON-TIME
OFF
SLEEP/
WAKE UP
ALT.CH
0
1
REC
PAUSE
/STILL
/OTR
PLAY
REW
F.FWD
2
STOP
MUTE
2
o
p
Press the PLAY/ button or the STO P/ button to select
CH.
VOL.
s
SLEEP. Then press the REW (ind)/ button or the
B
F.FW D/ button to select 30 MIN(utes), 60 MIN(utes), 90
MIN(utes), 120 MIN(utes) or O FF. (You can not set the sleep
CABLE
/DBS
SMART
PICTURE
COMBI
timer during a recording.)
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TO ADJUST PRESS { /
B
TRACKING
VAR.SLOW
–TIMER–
INDEX
SKIP
>
SLEEP
WAKE UP
ON-TIME
30 MIN
SEARCH
3
Press the STATUS/EXIT button. The TV/VCR will shut itself
off after the specified amount of time.
One minute before the TV/VCR shuts itself off, the seconds will
count down on the screen.
GOOD NIGHT appears on the TV/VCR screen 10 seconds
before the TV/VCR shuts itself off.
Helpful Hints
• To cancel the sleep timer, press the
COMBI button, then press the
SLEEP/WAKE UP button. Press the
PLAY/o button or the STOP/p but-
ton to select SLEEP, then press the
s
REW(ind)/ button or the
B
F.FWD/ button to select OFF.
Press the STATUS/EXIT button.
• To see how much time remains
before the TV/VCR shuts itself off,
press the SLEEP/WAKE UP button,
then press the PLAY/o button or
the STOP/p button to select SLEEP.
To remove the display, press the
STATUS/EXIT button.
• If you start a recording after you set
the Sleep Timer, the Sleep Timer will
be cancelled.
Wake Up Timer 53
The Wake Up Timer turns on the TV/VCR automatically at a speci-
fied time within the next 24 hours. You may set the TV/VCR to turn
on at a TV channel (the channel at which the TV/VCR was set last)
or with VCR playback. To set the Wake Up Timer, follow the steps
below. Before you begin:
G Set the clock. If the clock is not set, CLOCK MUST BE SET will
appear on the screen at step 2. Then the SET CLOCK menu will
appear. Details are on pages 12-17.
4
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
5
G Put a tape in the TV/VCR if you want the TV/VCR to start tape
playback at the specified time.
G Make sure no timer recordings are set for the time at which you
want the TV/VCR power to come on.
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
1
REC
PAUSE
/STILL
/OTR
PLAY
1
Press the COMBI button, then press the SLEEP/W AKE UP
button.
REW
F.FWD
STOP
MUTE
TO ADJUST PRESS { /
B
CH.
VOL.
–TIMER–
CABLE
/DBS
SMART
PICTURE
>
SLEEP
WAKE UP
ON-TIME
OFF
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
2
INDEX
SKIP
SEARCH
Press the PLAY/o button or the STOP/p button to select
W AKE UP. Then, press the REW (ind)/s button or the
F.FW D/B button to select TV ON or VCR ON.
TO ADJUST PRESS { /
–TIMER–
B
SLEEP
WAKE UP
ON-TIME
>
TV ON
2-3
3
Press the PLAY/o button or the STOP/p button to select
ON-TIME. Then, press the REW (ind)/s button or the
F.FW D/B button to select your desired wake up tim e. Each
press of the F.FWD/B button or the REW(ind)/s button will
increase (or decrease) the time by 10 minutes.
TO ADJUST PRESS { /
B
–TIMER–
SLEEP
WAKE UP
ON-TIME
12:00 AM
>
Helpful Hint
4
• To cancel the Wake Up Timer, fol-
low step 1 above. At step 2, press
the REW(ind)/s button or the
Press the STATUS/EXIT button.
5
B
F.FWD/ button to select OFF at
WAKE UP. Press the STATUS/EXIT
button.
Press the POW ER button to turn off the TV/VCR. The
TV/VCR will turn itself on at the specified tim e.
54 Closed Caption
When you watch a program that has closed captions, you can
access on-screen boxes containing the program’s dialogue (for
example, what a character is saying), dialogue in a foreign lan-
guage, or information (such as a channel guide, schedule, or
announcements). Follow the steps below to select closed cap-
tions.
Not all TV programs and commercials have closed captions.
Similarly, all types of closed captions (second language, half-screen
text, etc.) are not always broadcast. If closed captioning is not
broadcast, you cannot receive it. This does not indicate a prob-
lem with the TV/VCR. Refer to your area’s TV program listings
for the shows offered with closed captions.
2-3
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
1
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
1
Press the CO MBI button, then press the MENU button.
STOP
MUTE
CH.
VOL.
2
CABLE
SMART
PICTURE
COMBI
/DBS
Press the PLAY/G button or the STO P/G button to select
CAPTIO N.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TO ADJUST PRESS { /
B
TRACKING
VAR.SLOW
OFF
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
INDEX
SKIP
SEARCH
TINT
3
Press the REW (ind)/{ button or the F.FW D/B button to
select your desired closed caption m ode.
The selected closed caption mode will appear beside CAPTION
on the screen.
G CAPTION1 displays standard closed captions (what a character
is saying).
G CAPTION2 displays foreign language closed captions (foreign
language words showing what a character is saying).
G TEXT1 and TEXT2 display half-screen text (such as a channel
guide, schedule, or announcement).
G OFF turns off closed captions. Captions will not appear on the
screen.
TO ADJUST PRESS { /
B
Exam ple:
CAPTIO N1
Menu
CAPTION1
>
CAPTION
REMINDER
BRIGHTNESS
PICTURE
COLOR
Screen
TINT
Helpful Hint
• To cancel closed captions, follow
steps 1-2. At step 3, press the
REW(ind)/{ button or the
F.FWD/B button to select OFF.
Press the STATUS/EXIT button.
Closed Caption (cont’d) 55
4
Press the STATUS/EXIT button. The type of closed captions
you selected at step 3 will appear on the screen if available.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
4
1
4
7
2
5
8
3
6
9
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
HELLO
STOP
MUTE
Standard Closed Captions
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
WORLD WEATHER
TRACKING
VAR.SLOW
5 C
8 C
7 C
23:00
20:00
4:00
CLOUD
RAIN
CLOUD
NYL
LOS
LONDON
INDEX
SKIP
SEARCH
Half-screen text
Helpful Hints
• You cannot view closed captions dur-
ing recording or tape playback if
COUNTER ONLY is ON. Details are
on page 28.
• Abbreviations, symbols, and other
grammatical shortcuts are often used
in order to keep pace with the on-
screen action. This does not indicate
a problem with the TV/VCR.
• When you change channels, the
closed captions may be delayed for a
few seconds.
• When you adjust the volume or mute
the volume, closed captions may be
delayed for a few seconds. Details
are on page 56.
56 Volume Bar
Volum e Bar
Usually, the volume bar appears when you press the VOL(ume)
4 2-3
o/
p
/
buttons. If you do not need it, set the VOLUME BAR to OFF.
For example, when you watch a program that is being broadcast
with closed captions, you may choose to set the VOLUME BAR to
OFF so the captions can remain on the screen. The captions will
EJECT
POWER
STATUS
o/
p
remain on the screen even when you press the VOL(ume)
buttons or the MUTE button.
/
MENU
CLEAR
FM
/EXIT
1
1
4
7
2
5
8
3
6
9
1
SLEEP/
Press the COMBI button, then press the MENU button.
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
PRESS
B
>
PRIM. SETUP
VCR PROGRAM
VCR SETUP
CAPTION
REW
F.FWD
STOP
MUTE
REMINDER
BRIGHTNESS
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
2
SPEED MEMORY VCR PLUS+
Press the PLAY/G button or the STOP/G button to select
PRIM. SETUP. Then, press the F.FW D/B button.
PRIMARY SETUP
F.ADV
SLOW
ENTER
TRACKING
VAR.SLOW
INDEX
SKIP
> SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
SEARCH
VOLUME BAR
SET CLOCK
[OFF]
SELECT KL CHOOSE
B
TO END PRESS EXIT
3
Press the PLAY/G button or the STOP/G button to select
VOLUME BAR, then press the F.FW D/B button. Each press
of the F.FWD/B button will turn the VOLUME BAR ON or OFF.
PRIMARY SETUP
SELECT LANGUAGE
AUTO PROGRAMMING
CH MEMORY REVIEW
> VOLUME BAR
SET CLOCK
[ON]
SELECT KL CHOOSE
B
TO END PRESS EXIT
4
Press the STATUS/EXIT button.
Automatic Operation Features 57
The following playback features will always operate.
Autom atic Playback
When you put a tape in the TV/VCR, the power will come on
automatically. If the tape’s record tab is missing, playback will
begin. If a timer recording is set, the power will not come on
automatically when you insert a tape with the record tab intact. If
a timer recording is set and the TV/VCR power is off, the
TV/VCR will eject the tape if the record tab is missing.
Autom atic Rewind, Eject, O ff
When you play, fast forward, or record a tape to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject the
tape. If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the real-time counter is set
to zero. The TV/VCR will not turn itself off or eject the tape.
Mem ory Rewind, Power O ff
When you press the POWER button while the TV/VCR is rewind-
ing a tape, REW G POWER OFF will appear on the screen. The
TV/VCR will turn itself off when the tape has finished rewinding.
If a real-time counter memory is set, the TV/VCR may only
rewind the tape to the point at which the counter was set to
zero, then turn itself off.
Tape Eject
A tape can be ejected with the TV/VCR power on or off (but the
TV/VCR must be plugged in). If a timer recording is programmed,
a tape can not be ejected when the power is off. Turn on the
TV/VCR power, then eject the tape. Be sure to insert a tape and
turn off the TV/VCR power for the timer recording.
Autom atic Tracking Adjustm ent
The TV/VCR automatically adjusts the tracking to give you the
best possible picture quality. With some recordings, however,
you may get a better picture using the manual tracking controls
(see below).
Manual Tracking
To adjust the tracking manually, press the CHANNEL o/p but-
tons on the TV/VCR or the TRACKING o/p buttons on the
remote control during playback.
Tracking returns to Automatic Tracking Adjustment when you
insert a tape or press the STOP/p button.
Before
Tracking
Adjustment
After
Tracking
Adjustment
58 SmartPicture
The SmartPicture feature allows you to improve the TV/VCR’s pic-
ture when viewing sports, a movie, or video games; to improve the
picture when the antenna/cable signal is weak; or to reset the pic-
ture controls to their original settings.
EJECT
MENU
POWER
CLEAR
STATUS
/EXIT
FM
1
4
7
2
5
8
3
6
9
1
Press the COMBI button, then press the SMART PICTURE
button repeatedly until the Sm artPicture m ode you want
appears on the screen. Your selection will remain on the screen
for about 10 seconds, then disappear.The following options will be
available.
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
STOP
MUTE
SPO RTS
MO VIE
Use to watch a sports program.
Use to watch a movie.
CH.
VOL.
CABLE
/DBS
SMART
PICTURE
COMBI
W EAK SIGNAL Use when the picture is weak.
VIDEO GAMES Use when playing a video game.
Use to reset the picture controls to
1
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TV RESET
TRACKING
VAR.SLOW
their original settings.
INDEX
SKIP
SEARCH
FM Radio 59
Follow the steps below to listen to FM radio stations through the
TV/VCR.
Choosing FM stations...
1
EJECT
POWER
CLEAR
Press the COMBI button, then press the FM button to
select FM m ode. The radio frequency appears on the TV/VCR
screen, moving around the screen every few seconds.
STATUS
/EXIT
MENU
FM
1,3
1
4
7
2
5
8
3
6
9
FM 88.0MHz
SLEEP/
WAKE UP
ALT.CH
0
REC
/OTR
PAUSE
/STILL
PLAY
REW
F.FWD
2
STOP
MUTE
o/
p
Press the CH(annel)
/
buttons until your desired radio
CH.
VOL.
frequency appears. You can choose FM stations within the band
range of 88.0 ~ 108.0 MHz. You may get better FM reception by
repositioning the TV/VCR.
2
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
3
TRACKING
VAR.SLOW
To exit FM m ode and return to TV m ode, press the FM
button again.
INDEX
SKIP
SEARCH
Switching the Antennas
If you receive a weak radio signal, you may go to TV mode and
switch between the internal (INT) and external (EXT) antennas.
When you select the external antenna, make sure your TV antenna
or TV cable signal is connected to the ANT(enna) Jack on the
TV/VCR. Details are on page six.
To switch the antennas, follow these steps.
1
Press the COMBI button, then press the FM button to return to TV
mode if necessary.
2
Press the MENU button.
Helpful Hints
3
• If you turn off the TV/VCR in FM
mode, the TV/VCR will be in TV
mode when you turn on the TV/VCR
again.
Press the PLAY/G button or the STOP/G button to select FM
ANTENNA.
• You cannot record the FM station.
• You cannot switch to FM mode dur-
ing tape playback, although tape
playback is allowed while in FM
mode.
4
Press the REW(ind)/{ button or the F.FWD/B button to select
INT or EXT.
• You must be in TV mode in order to
select Line Input mode (A/V IN).
5
Press the STATUS/EXIT button.
60 Reminder
The channel number will remain on the screen at all times when
you set REMINDER to ON. The exception is when closed cap-
tioning is selected or during tape playback.
4 2-3
Set REMINDER to ON or OFF by following the steps below.
EJECT
POWER
STATUS
/EXIT
MENU
CLEAR
FM
1
1
4
7
2
5
8
3
6
9
1
Press the CO MBI button, then press the MENU button.
SLEEP/
WAKE UP
ALT.CH
TO ADJUST PRESS { /
B
0
REC
PAUSE
/STILL
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
/OTR
PLAY
REW
F.FWD
TINT
SHARPNESS
STOP
MUTE
CH.
VOL.
CABLE
SMART
PICTURE
COMBI
/DBS
2
Press the PLAY/G button or the STO P/G button to select
REMINDER.
SPEED MEMORY VCR PLUS+
F.ADV
SLOW
ENTER
TO ADJUST PRESS { /
B
TRACKING
VAR.SLOW
OFF
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
INDEX
SKIP
SEARCH
TINT
SHARPNESS
3
Press the REW (ind)/{ button or the F.FW D/B button to
select O N or O FF. Each press of the REW(ind)/{ button or
the F.FWD/B button turns REMINDER ON or OFF.
TO ADJUST PRESS { /
B
CH12
ON
>
REMINDER
BRIGHTNESS
PICTURE
COLOR
TINT
SHARPNESS
4
Press the STATUS/EXIT button.
Index Search 61
This feature allows you to index the starting points of programs
that you have recorded on a tape. Then, you can easily rewind or
fast forward to that point.
Exam ple:
If you are watching program number 4 and you want to fast for-
ward to program number 7, skip three programs.
EJECT
POWER
STATUS
MENU
CLEAR
FM
/EXIT
1
4
7
2
5
8
3
6
9
CURRENT PLAYBACK PROGRAM
Beginning of tape
End of tape
2
3
Pro. 1 Pro. 2 Pro.3 Pro. 4 Pro. 5 Pro. 6 Pro. 7
SLEEP/
WAKE UP
ALT.CH
0
4
3
2
1
1
2
3
REC
/OTR
PAUSE
/STILL
INDEX MARK
PLAY
REW
F.FWD
STOP
MUTE
CH.
VOL.
1
Press the CO MBI button, then press the INDEX SEARCH
button to bring up the index search display. There must be
a tape in the TV/VCR.
CABLE
/DBS
SMART
PICTURE
COMBI
SPEED MEMORY VCR PLUS+
1
F.ADV
SLOW
ENTER
INDEX SEARCH
00
TRACKING
VAR.SLOW
INDEX
SKIP
SEARCH
ENTER INDEX NUMBER
2
W ithin 10 seconds, use the Num ber buttons to enter the
num ber of program s that you want to skip. Enter a zero
before single-digit numbers. For example, to skip three programs,
press Number buttons 0, 3. If you do not make an entry within 10
seconds, the TV/VCR will exit Index Search mode.
3
Helpful Hints
W ithin 10 seconds, press the F.FW D/B button or the
REW (ind)/{ button to skip forward or backward. The
TV/VCR will fast forward or rewind to the beginning of the
desired program, then begin playback. (The program numbers
count down on the screen as the searching progresses. TV pro-
gramming will appear during the search.)
• Up to 20 index marks may be
searched.
• This function will not operate during
recording.
• Press the STOP/p button to stop the
search.
• An index mark will be made auto-
matically when a recording begins.
• The index mark is not made at a
point at which recording is paused.
• The time gap between index marks
should be greater than 1 minute for
SP recording, 2 minutes for LP record-
ing, and 3 minutes for SLP recording.
62 Helpful Hints
If you are having problems with your product, check this list of problems and possible solutions before
requesting service. You may be able to solve the problem yourself.
If you need to call a customer service representative, please know the model number and serial number of
your product before you call. This information is on the back of the product. Also, please take a moment to
identify the problem you are having, and be prepared to explain this to the representative. If the representa-
tive will need to help you with operations, please stay near the product. Our representatives will be happy to
assist you.
Location
For safe operation and satisfactory performance of your TV/VCR, remember the following:
• Shield it from direct sunlight and keep it away from sources of intense heat.
• Avoid dusty or humid places.
• Avoid places with insufficient ventilation. Do not block the ventilation openings at the top and bottom of
the TV/VCR. Do not place the TV/VCR on a carpet, as this will block the ventilation openings.
• Avoid locations subject to strong vibrations.
• Do not place the TV/VCR near strong magnetic fields.
• Do not move the TV/VCR from a cold place to a hot place, or vice versa.
Electrical Shock and Fire Hazards
• Do not handle the power cord with wet hands.
• Do not pull the power cord when disconnecting the TV/VCR from the AC (alternating current) wall out-
let. Grasp it by the plug.
• If you spill water on the TV/VCR, unplug the power cord immediately and take the TV/VCR to an autho-
rized service center.
• Do not put your fingers or objects into the TV/VCR cassette compartment.
• Do not place anything on top of the TV/VCR.
Dew W arning (Moisture Condensation)
• Moisture may condense inside the unit when you move it from a cold place to a warm place, after heating
a cold room, or when the humidity is high. There is no warning that moisture is in your TV/VCR. Playing
a tape in a TV/VCR in which moisture has accumulated could damage the tape and the TV/VCR. If you
suspect moisture inside the TV/VCR, keep the TV/VCR power on (but do not play a tape) for at least two
hours. This will allow the TV/VCR to dry.
TV/VCR will not perform a tim er recording.
• Set the recording start and stop times correctly. Details are on pages 34-37. Midnight is 12 a.m. Noon is 12
p.m.
• Make sure the TV/VCR power is off.
• Set the clock. Details are on pages 12-17.
• Put a tape in the TV/VCR. The tape must have a record tab.
• With ShowGuard, you don’t have to worry about losing your timer recordings. If the power fails, timer
recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are
using AUTO CLOCK. Details are on pages 14-17. If you are not using AUTO CLOCK, reset the clock
manually. Details are on pages 12-13.) The timer recording will not occur only if it was scheduled to take
place during the power failure.
• Make sure DEFEAT RECORDING is OFF. Details are on page 33.
TV/VCR will not record.
• Make sure the tape has a record tab. Details are on page five.
• Make sure DEFEAT RECORDING is OFF. Details are on page 33.
• Plug the power cord into an active AC outlet. Details are on page seven.
• Check your hookups. Details are on pages six-seven.
• Set up the channels. Details are on page 10.
Channel reception is poor.
• Check connections, then set up the channels again. Details are on page 10.
Helpful Hints (cont’d) 63
The rem ote control is not available, or the rem ote control will not access the m enu.
• Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for example,
to program a timer recording) using the front panel buttons. Details are on page 22.
TV/VCR has no power.
• Connect the power cord to an AC (alternating current) outlet completely.
TV/VCR does not have a picture.
• Adjust the antenna. Details are on page six.
• Adjust the TV/VCR picture controls. Details are on pages 26-27 and 58.
• Select an active channel.
TV/VCR has poor sound or no sound.
• Adjust the volume.
• Press the MUTE button to restore the volume.
Tape playback is poor or tape is destroyed.
• Adjust the tracking. Details are on page 57.
• If moisture has accumulated in your TV/VCR, keep the power on for at least two hours, but do not try to
play a tape. Details are on page 62.
TV/VCR does not display closed captions.
• Make sure COUNTER ONLY is OFF. Details are on page 28.
• Make sure closed captioning is available for the program. Refer to the TV listings in your local newspaper.
Rem ote control does not operate TV/VCR.
• Press the COMBI button, then try the other TV/VCR buttons.
• Aim the remote control directly at the TV/VCR’s remote sensor. Details are on pages five and 22.
• Remove all obstacles between the remote control and the TV/VCR.
• Inspect and replace the batteries in the remote control. Details are on page five.
Num ber buttons will not select channels above 69.
• Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel
numbers as a three-digit number. Details are on page 24.
You can not insert a tape into the TV/VCR.
• Insert the tape window side up, with the record tab facing you.
• Make sure a tape isn’t already in the TV/VCR by pressing the STOP/EJECT button on the TV/VCR.
• Gently push on the center of the tape. Never force a tape into the TV/VCR.
• If you have set a timer recording and the TV/VCR power is off, the TV/VCR will eject the tape if the record
tab is missing.
You can not rem ove the tape from the TV/VCR.
• Make sure the power plug is connected completely to an AC (alternating current) outlet.
• If a timer recording is programmed, turn on the TV/VCR power, then eject the tape. Be sure to insert a
tape and turn off the TV/VCR power for the timer recording.
• Unplug the power cord for five minutes. Then, plug in the power cord again, then press the POWER
button on the TV/VCR. If the tape does not eject, press the STOP/EJECT button on the TV/VCR three
to five times. If the tape still does not eject, you may need to have an authorized servicer remove the
tape.
TV/VCR ejects the tape when you try to start a recording.
• Make sure the tape has a record tab. Details are on page five.
The cylinder rotates when tape playback is stopped.
• To enable the quick play mechanism, the cylinder will rotate for about five minutes. This is normal. The
quick play mechanism switches the tape mechanism from Stop to Play in just one second.
64 Glossary
AUDIO In Jack: jack on the front of the TV/VCR which
records or receives audio from another source.
Autom atic Channel Setup: process in which the TV/VCR
memorizes all available channels. Then, when you push the
CHANNEL o/p buttons, you only scan through channels you
receive.
Bands: settings that allow you to tune channels.
• Antenna – VHF (very high frequency; channels 2-13) and UHF
(ultra high frequency; channels 14-69).
• Cable – all standard channels can be received without a Cable
Box.
Brightness: adjusting increases or decreases the brightness of
the color on the screen.
Color: adjusting pales or brightens the TV/VCR color.
Dubbing: copying a tape using a VCR.
HQ : high quality; a feature in the TV/VCR circuitry which pro-
vides enhanced picture detail.
Line Input: The channel to which you set your TV/VCR during
dubbing. The line input channel is always channel 00 (A/V IN).
You should also set the TV/VCR to A/V IN (audio/video in) if you
want to watch material that is playing on different equipment. For
example, use A/V IN if you have connected a DVD Player to the
Audio and Video In jacks on the front of the TV/VCR.
Mode: a TV/VCR operation.
O TR: One-Touch Recording; a timed recording that starts
immediately and records for 30 minutes to eight hours, whichev-
er you specify.
Picture: adjusting increases or decreases the contrast of the pic-
ture on the screen.
Sharpness: adjusting softens or clarifies the picture on the screen.
Tape Speeds: how fast the tape travels during playback or
recording.
• SP (standard play) – fastest tape speed (recording time for a
T120 tape is approximately two hours); best picture quality.
• LP (long play) – average tape speed; playback only.
• SLP (super long play) – slowest tape speed (recording time for
a T120 tape is approximately six hours).
Tint: adjusting changes the tints of the picture on the TV/VCR
from purple to green.
VIDEO In Jack: jack on the front of the TV/VCR which records
or receives video from another source.
Specifications 65
General
CRT: 13-inch in line gun (CCC134)
19-inch in line gun (CCC194)
Television system: NTSC-M
Closed caption system: Section 15.119, FCC
(Federal Communications Commission) Standard
Video Heads: Four heads
Tape width: 1/2 inch (12.65 mm)
Tape speed
SP: 33.35 mm/sec.
LP: 16.67 mm/sec.
SLP: 11.12 mm/sec.
Operating Temperature: 41˚F (5˚C) to 104˚F (40˚C)
Relative Humidity: 10% to 75%
Power requirement: AC 120V, 60Hz
Power consumption: 65W (CCC134)
90W (CCC194)
Sound output: 1W
Dimensions:
15-3/4" (H) x 15-3/16" (W) x 14-13/16" (D)
400mm x 386mm x 377mm
(CCC134)
19-5/8" (H) x 19-3/8" (W) x 18-11/16" (D)
498mm x 492mm x 474mm
(
)
CCC194
Weight: 24.3 lbs (11.0 kg) (CCC134)
Weight: 44.1 lbs (20.0 kg) (CCC194)
Tuner Broadcast Channels
VHF 2-13, UHF 14-69
Cable TV Channels
1-125
FM Radio Stations
88.0 ~ 108.0 MHz
Term inals
Antenna In: VHF/UHF 75 ohms unbalanced
Video In: RCA connector
Audio In: RCA connector
Earphone: 3.5 mm CES
Electrical Specifications
Video input level: 0.5~2.0Vp-p
Audio input level: -10dBv
Video S/N ratio
SP: More than 42dBµ
Audio S/N ratio
SP: More than 38dB
Designs and specifications are subject to change without notice and without our legal obligation.
66 Limited Warranty
TV/VCR COMBINATION
90 Days Free Labor/One Year Free Parts Exchange (Two Years Free Exchange on Color Picture Tube)
This product must be carried in for repair.
WHO IS COVERED?
uct, the local Philips service organization will attempt
You must have proof of purchase to receive warranty to provide service (although there may be a delay if
service. A sales receipt or other document showing
that you purchased the product is considered proof
of purchase.
the appropriate spare parts and technical manual(s)
are not readily available).
MAKE SURE YOU KEEP...
WHAT IS COVERED?
Please keep your sales receipt or other document
showing proof of purchase. Attach it to this owner’s
manual and keep both nearby. Also keep the original
box and packing material in case you need to return
your product.
Warranty coverage begins the day you buy your
product. For 90 days thereafter, all parts will be
repaired or replaced, and labor is free. From 90 days
to one year from the day of purchase, all parts will be
repaired or replaced, but you pay for all labor
charges. From one to two years from the day of pur-
chase, you pay for the replacement or repair of all
parts except the picture tube, and for all labor
charges. After two years from the day of purchase, you
pay for the replacement or repair of all parts, and for
all labor charges.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting
service. Adjustments of the controls discussed there
may save you a service call.
TO GET WARRANTY SERVICE IN U.S.A., PUER-
TO RICO OR U.S. VIRGIN ISLANDS...
Take the product to a Philips factory service center
(see enclosed list) or authorized service center for
repair. When the product has been repaired, you
must pick up the unit at the center. Centers may
keep defective parts.
All parts, including repaired and replaced parts, are
covered only for the original warranty period. When
the warranty on the product expires, the warranty on
all replaced and repaired parts also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
(In U.S.A., Puerto Rico and U.S. Virgin Islands, all
implied warranties, including implied warranties of
merchantability and fitness for a particular purpose,
are limited in duration to the duration of this express
warranty. But, because some states do not allow limi-
tations on how long an implied warranty may last, this
limitation may not apply to you.)
• labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
• product repair and/or part replacement because of
misuse, accident, unauthorized repair or other
cause not within the control of Philips Consumer
Electronics.
• reception problems caused by signal conditions or
cable or antenna systems outside the unit.
• a product that requires modification or adaptation
to enable it to operate in any country other than
the country for which it was designed, manufac-
tured, approved and/or authorized, or repair of
products damaged by these modifications.
• incidental or consequential damages resulting from
the product. (Some states do not allow the exclu-
sion of incidental or consequential damages, so the
above exclusion may not apply to you. This
includes, but is not limited to, prerecorded materi-
al, whether copyrighted or not copyrighted.)
• damage caused by the use of non-VHS tapes or
tapes that have not been tested and labeled for
use in two, four, six, and eight hour VHS
recorders.
TO GET WARRANTY SERVICE IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-363-7278 (English Speaking)
(In Canada, this warranty is given in lieu of all other
warranties. No other warranties are expressed or
implied, including any implied warranties of mer-
chantability or fitness for a particular purpose. Philips
is not liable under any circumstances for any direct,
indirect, special, incidental or consequential damages,
howsoever incurred, even if notified of the possibility
of such damages.)
REMEMBER...
Please record below the model and serial numbers
found on the product. Also, please fill out and mail
your warranty registration card promptly. It will be
easier for us to notify you if necessary.
• a product that is used for commercial or institu-
tional purposes.
MODEL # __________________________________
SERIAL # __________________________________
WHERE IS SERVICE AVAILABLE?
Warranty service is available in all countries where
the product is officially distributed by Philips
Consumer Electronics. In countries where Philips
Consumer Electronics does not distribute the prod-
This warranty gives you specific legal rights. You may have
other rights which vary from state to state.
Philips Service Solutions Group, P.O . Box 2976, Longview, Texas 75606, (903) 242-4800
EL4963E008 / MAC 6108/ 3-00
Index 67
a-b repeat play . . . . . . . . .44-45
accessories . . . . . . . . . . . . . . .68
ant(enna) jack . . . . . . . . . . .6, 23
audio jack . . . . . . . . . . .7, 22, 32
automatic
language selection . . . . . . . . . . .9
line input mode . . . .7, 10, 32, 64
long play . . . . . . . . . . . . . .30, 64
lp . . . . . . . . . . . . . . . . . .30, 64
smartclock . . . . . . . . . . . . .14-17
smartlock . . . . . . . . . . . . .48-51
smartpicture
button . . . . . . . . . . . . . . . .24
setting . . . . . . . . . . . . . . . .58
sp . . . . . . . . . . . . . . . . . .30, 64
specifications . . . . . . . . . . . . .65
sqpb . . . . . . . . . . . . . . . . . . . .29
standard play . . . . . . . . . .30, 64
status display . . . . . . . . . . . . .28
status/exit button . . . . . . .25, 28
still picture . . . . . . . . . . . . . . .46
stop/p button . . . . . . . . . . . .25
stop/eject button . . . . . . . . . .22
super high speed searching . . .46
super long play . . . . . . . . .30, 64
playback . . . . . . . . . . . . . . .57
rewind . . . . . . . . . . . . . . . .57
memory
button . . . . . . . .25, 42, 44-45
real-time counter . . . . . . . .42
rewind, power off . . . . . . .57
menu
button . . . . . . . . . . . . . . . .24
front panel button access . .22
mute button . . . . . . . . . . . . . .25
batteries . . . . . . . . . . . . . . . . . .5
blue background . . . . . . . . . . .47
brightness, adjusting . . . . .26-27
cable/dbs button . . . . .20-21, 25
channel
above 100 . . . . . . . . . . . . .24
adding . . . . . . . . . . . . . . . .11
buttons . . . . . . . . . .22, 24, 57
deleting . . . . . . . . . . . . . . .11
reviewing . . . . . . . . . . . . . .11
setup . . . . . . . . . . . . . . . . .10
clear button . . . . . . . . . . . . . .25
clock . . . . . . . . . . . . . . . . .12-17
closed caption system . . . .54-55
color, adjusting . . . . . . . . .26-27
combi button . . . . . . . . . . . . .25
connections . . . . . . . . . . .6-7, 32
contents, table of . . . . . . . . . . .4
controls
number buttons . . . . . . . . . . .24
one-touch recording . . . . . . . .31
table of contents . . . . . . . . . . .4
tape
duplication . . . . . . . . . . . . .32
speed . . . . . . . . . . . . . .30, 64
time
setting . . . . . . . . . . . . . .12-17
zone . . . . . . . . . . . . . . . . . .19
timer recording
cancelling . . . . . . . . . . . . . .37
reviewing . . . . . . . . . . . . . .37
setting . . . . . . . . . . . . . .34-36
with vcr plus+ programming
system . . . . . . . . . . . . . .40-41
tint, adjusting . . . . . . . . . . .26-27
tracking . . . . . . . . . . . . . . . . .57
pause/still button . . . . . . .25, 46
picture, adjusting . . . . . . . .26-27
play button . . . . . . . . . . . .22, 24
playback options . . . . . . . . . . .46
playing . . . . . . . . . . . . . . . . . .29
power
button . . . . . . . . . . . . .22, 24
cord . . . . . . . . . . . . . . . .7, 23
real-time counter memory . . .42
rear panel . . . . . . . . . . . . . . . .23
rec/otr button . . . . . . . . .22, 25
record light . . . . . . . . . . . . . .22
recording . . . . . . . . . . . . . . . .30
reminder . . . . . . . . . . . . . . . .60
remote
remote . . . . . . . . . . . . .24-25
tv/vcr . . . . . . . . . . . . . . . . .22
counter only mode . . . . . . . . .28
daylight-savings time . . . . . . . .18
defeat recording . . . . . . . . . . .33
duplication . . . . . . . . . . . . . . .32
var.slow buttons . . . . . . . .25, 46
vcr plus+
control
buttons . . . . . . . . . .24-25
using . . . . . . . . . . . . . . . .5
sensor . . . . . . . . . . . . . . . .22
repeat play . . . . . . . . . . . . . . .43
rerecording . . . . . . . . . . . . . .32
rew(ind) button . . . . . . . . . . .22
rew(ind)/{ button . . . . . .25, 46
rewinding . . . . . . . . . . . . . . . .46
/enter button . . . . . . . .25, 40
programming system . . .38-41
timer recording . . . . . . .40-41
video jack . . . . . . . . . . .7, 22, 32
volume bar . . . . . . . . . . . . . . .56
earphone jack . . . . . . . . . . . . .22
ejecting a tape . . . . . . . . .24, 63
erasure prevention . . . . . . . . . .5
f.adv button . . . . . . . . . . .24, 46
fast forward search . . . . . . . . .46
f.fwd button . . . . . . . . . . . . . .22
f.fwd/B button . . . . . . . . .25, 46
fm button . . . . . . . . . . . . .25, 59
fm radio . . . . . . . . . . . . . . . . .59
front panel . . . . . . . . . . . . . . .22
wake up timer . . . . . . . . . . . .53
warranty . . . . . . . . . . . . . . . . .66
safety precautions . . . . . . . . . .3
searching . . . . . . . . . . . . . . . .46
sensor (remote) . . . . . . . . . . .22
sharpness, adjusting . . . . . .26-27
showguard . . . . . . . . .34, 37, 62
skip search button . . . . . . . . .24
sleep timer . . . . . . . . . . . . . . .52
slow
glossary . . . . . . . . . . . . . . . . .64
head cleaner . . . . . . . . . . . .5, 66
helpful hints . . . . . . . . . . . .62-63
hookups . . . . . . . . . . . . .6-7, 32
button . . . . . . . . . . . . .24, 46
motion playback . . . . . . . . .46
slp . . . . . . . . . . . . . . . . . .30, 64
index search . . . . . . . . . . . . . .61
SUPPLIED ACCESSO RIES
The following items are supplied with your TV/VCR; they are provided to help you
use or set up your TV/VCR.
Remote Control 4835 218 37324
Two AA Batteries 4835 138 17012
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your TV/VCR, but they are
designed for use with your new TV/VCR. To order these optional accessories,
contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
Monaural Audio and Video Cables (6 feet)
VHS Cassette Rewinder
#M61117
Color-coded for easy connection
#M61103
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
This owner’s manual is made of recycled paper.
As an ENERGY STAR® Partner, Philips Consumer Electronics
has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
IB8289E001
Printed In Malaysia
0EMN1809 / T5212UN * * * * *
SUPPLIED ACCESSO RIES
The following items are supplied with your TV/VCR; they are provided to help you
use or set up your TV/VCR.
Remote Control 4835 218 37324
Two AA Batteries 4835 138 17012
O PTIO NAL ACCESSO RIES
The following additional items are not provided with your TV/VCR, but they are
designed for use with your new TV/VCR. To order these optional accessories,
contact us at:
Philips Parts & Accessories Marketing Department
401 East Old Andrew Johnson Highway
P.O. Box 555
Jefferson City, TN 37760
1-800-851-8885.
Monaural Audio and Video Cables (6 feet)
VHS Cassette Rewinder
#M61117
Color-coded for easy connection
#M61103
Three Cassette Storage Cases (plastic)
Fits VHS and Beta cassettes
#M61104
Six High-grade, VHS, T-120 Cassettes
#MHG1206
This owner’s manual is made of recyclable materials.
Remember to recycle!
As an ENERGY STAR® Partner, Philips Consumer Electronics
IB8289E001
Printed In Mexico
0EMN01803 / T7262UN * * * * *
has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
|