Philips AV5 User Manual

Quick Use and Setup Guide  
HDTV Monitor  
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  
EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.  
Contents  
Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
See the User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Positioning the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Mounting the Swivel to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Mounting the Swivel and TV to the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Making Basic Connections to the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3–5  
Operating the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Using the On-screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Using the Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Using the Installation Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
As an Energy Star® Partner, Philips Consumer Electronics has deter-  
mined this product meets the Energy Star® guidelines for energy effi-  
ciency. Energy Star® is a U.S. registered mark. Using products with  
the Energy Star® label can save energy. Saving energy reduces air pollution and  
lowers utility bills.  
See the User Manual for Important Maintenance Information  
In addition to providing information about safety, connecting accessory devices,  
and using the TV’s features, the Directions for Use manual explains how to care  
for and maintain your Cineos television. The TV contains air filters that must be  
maintained and eventually replaced, and a lamp that eventually will need to be  
replaced.  
Air Filters  
The air filters (located at the bottom of the TV) must be kept clean and free of  
blockage.  
NOTE: DO NOT operate the TV without the filters. Damage to the TV will occur.  
Allow four to six inches of space behind the TV for air flow through the back  
slots.  
IMPORTANT: Excessive heat inside the TV resulting from inadequate ventilation  
will cause the TV to shut down or not  
to operate.  
Keep the Directions for Use manual  
accessible to correctly maintain and  
care for your TV, as well as to  
Lamp  
understand and use its features.  
An on-screen message will alert you when the lamp is nearing the end of its  
expected lifetime so that you can change it before it wears out.  
IMPORTANT: The TV will not operate if the lamp door is left open, and the TV  
will shut down if the door is opened during operation.  
Picture Settings  
Your TV was set up at the factory for optimal showroom viewing. For optimal  
home viewing change the Auto Picture setting to Natural. See page 34 in the  
Direction for Use Manual.  
Back of TV  
Back of TV  
T
IN  
EXT  
Ventilation Slots  
Lamp Door  
INT  
EXT  
DVI  
G
S-VIDEO  
L
R
V
Pr  
R
Pb  
L
Y
V
R
R
L
L
R
L
V
G
S-VIDEO  
RGB+HV  
R
R
L
L
Pr  
Pr  
Pb  
Pb  
Y
Y
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
The lamp door must be closed for the TV to operate.  
Locations of Air Filters  
IMPORTANT! InitialTV Setup  
Please read this Quick Use and Setup Guide completely before  
Language  
Autoprogram  
you turn on the TV.  
Select your menu language with  
the cursor up/down.  
Press the OK key on the remote  
control to confirm.  
When you turn on your TV for the first time it will prompt you to enter  
some setup information about Language preference and Channel program-  
ming. See page 8 in this Quick Use and Setup Guide for more information  
about these menus.  
3135 035 21291  
Mounting the Swivel andTV to the Stand  
Install the plastic position pins in the stand.  
1
2
Place the TV and mounted swivel on the stand, aligning the  
front and sides of the TV with the front and sides of the  
stand. This will help properly seat the TV on the position-  
ing pins and align the pre-drilled holes on the stand and  
swivel. You do not need the rubber bumpers and long  
screws if you have already attached the swivel to the TV.  
1
2
Positioning  
Pins  
Use the supplied screws (2) and screw key to fasten the swivel to  
the stand. Install the back cover by sliding it up into the groove  
above the opening, then slide into the lower groove.  
Note: If accessories and cables protrude from the stand, leave the  
back cover off.  
3
4
Place accessory devices—HD satellite receiver, cable box, DVD  
player, or VCR, for example—inside the stand. (See below and  
Directions for Use manual for connection information.) Route the  
power cords through the opening in the bottom of the stand shelf,  
and route the connection cables through the openings in the back of  
the stand.  
Before swiveling the TV, make sure you have left enough slack in  
the cords of any connected accessory devices. This will prevent  
damage to the cords.  
5
3
4
5
INT  
EXT  
NOTE:  
DVI  
G
S-VIDEO  
L
R
V
Pr  
R
Pb  
L
Y
V
Installing these  
screws  
R
R
L
L
R
L
V
G
S-VIDEO  
RGB+HV  
R
R
L
L
Pr  
Pr  
Pb  
Pb  
Y
Y
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
reduces the  
risk of the TV  
sliding.  
D
V
D
6
1
9
D
V
D
/
C
D
P
L
A
Y
E
R
OPEN/CLOSE  
STOP  
PLAY  
PAUSE  
STANDBY-ON  
GUIDE  
INFO  
PREV  
NEXT  
POWER  
SELECT  
POWER  
HIGH DEFINITION  
Screws  
Rubber Locators  
Placing theTV on the Stand  
without the Swivel  
If you should decide not to purchase the optional swivel, you can  
place the TV directly on the stand.  
• First locate the nut and washer for each supplied rubber locator  
(2).  
• Place the rubber locators over the pre-drilled holes in the stand.  
• Place the washer and nut on each rubber locator.  
• Tighten each nut.  
• Place the TV and mounted swivel on the stand, aligning the  
front and sides of the TV with the front and sides of the stand.  
This will help properly seat the TV. The rubber locators will  
prevent the TV from sliding.  
Making Basic Connections to theTV  
CableTV  
Back of TV  
Connect the cable TV signal to the TUNER jack on the back of  
the TV. See page 8 for details on using Autoprogram to store chan-  
nels in the TV’s memory.  
NOTE: This connection will supply stereo sound to the TV if it is  
being broadcast by the station you are watching.  
DVI  
G
S-VIDEO  
L
R
V
DVI  
Pr  
R
Pb  
L
Y
V
G
S-VIDEO  
L
R
V
Pr  
R
Pb  
L
Y
V
R
R
L
L
R
R
L
L
R
L
V
G
S-VIDEO  
RGB+HV  
Pr  
Pr  
Pb  
Pb  
Y
Y
R
R
L
L
Incoming  
Cable TV  
Signal  
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
R
L
V
G
S-VIDEO  
RGB+HV  
Pr  
Pr  
Pb  
Pb  
Y
Y
R
R
L
L
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
Connect the incoming cable  
TV signal to the TUNER  
jack on the back of the TV.  
3
Making Basic Connections to theTV  
Cable Box with RF IN/OUT  
Connect the incoming cable TV signal to the CABLE IN  
Back of TV  
jack on the back of the cable box.  
Incoming  
Cable TV  
Signal  
1
2
3
Connect a coaxial cable (not supplied) to the TO TV jack  
on the back of the cable box and to the TUNER jack on the  
back of the TV.  
DVI  
G
S-VIDEO  
L
R
V
Set the Output Channel switch on the back of the cable box  
to CH 3 or 4 (whichever is correct for your cable box),  
then tune the TV to the corresponding channel. Once tuned,  
change channels at the cable box, not the TV.  
Back of Cable Box  
(example only)  
Pr  
R
Pb  
L
Y
V
R
R
L
L
NOTE: This connection will not supply stereo sound to the TV.  
The reason is that the RF output on a cable box—labeled “TO  
TV,” “OUT,” or “OUTPUT,” for example—will not send a stereo  
signal to the tuner (VHF/UHF) input on a TV.  
1
R
L
V
OUTPUT  
CH  
G
S-VIDEO  
3
4
CABLE  
IN  
TO TV  
RGB+HV  
2
Pr  
Pr  
Pb  
Pb  
Y
R
R
L
L
STANDARD/  
HD INPUTS  
3
TUNER  
Y
STANDARD/  
HD INPUTS  
Cable Box with A/V Outputs  
Connect the incoming cable TV signal to a signal splitter  
(not supplied).  
1
The signal splitter enables you to avoid having to use the  
TO TV jack on the back of the cable box. This jack will not  
supply stereo sound to the TV.  
DVI  
G
S-VIDEO  
R
L
V
Audio R (red)  
Audio L (white)  
Video (yellow)  
NOTE: Your cable box may have a different label for the  
TO TV jack, such as OUTPUT or OUT.  
Pr  
R
Pb  
L
Y
V
3
4
R
L
L
OUTPUT  
CH  
Connect a coaxial cable (not supplied) to a connector on  
the signal splitter and to the TUNER jack on the TV.  
R
3
4
R
L
V
2
L
R
CABLE  
IN  
TO  
TV  
VIDEO  
OUT  
AUDIO  
OUT  
G
S-VIDEO  
Connect a coaxial cable (not supplied) to a connector on  
the signal splitter and to the CABLE IN jack on the back of  
the cable box.  
RGB+HV  
Outputs  
3
Input  
1
2
Pr  
Pr  
P
R
R
L
L
STANDARD/  
HD INPUTS  
TUNER  
Connect A/V cables (not supplied) to the VIDEO and  
AUDIO L and R outputs on the back of the cable box and  
to the AV2 video (labeled V) and audio (labeled L and R)  
jacks on the back of the TV.  
Pb  
Y
STANDARD/  
HD INPUTS  
Incoming  
Cable TV  
Signal  
4
Signal Splitter  
(example)  
To view programs from your cable box, first press the  
Source button on the remote control.  
TV  
AV1:Other  
AV2:Other  
AV3:Other  
AV4:Other  
AV5:Other  
AV6:Other  
SIDE:Other  
5
Source  
OK  
Press the Cursor Down or Up buttons until the AV2 signal  
source is selected.  
6
Press the OK button to confirm your selection. The AV2  
input source becomes current for the viewing of cable TV  
programs through your cable box.  
7
NOTE: If your cable box Audio/Video outputs will not supply  
video and stereo audio to the TV, you will need to make the  
connection shown above in the example “Cable Box with  
RF IN/OUT.”  
5
7
6
Watching CableTV ProgramsThat  
Dont Require the Cable Box  
Since you’ve connected the cable TV signal directly to the TV’s  
tuner (step 2 above), you can also watch the unscrambled pro-  
grams by simply tuning to the desired channel. You must first use  
Autoprogram, however, to store channels in the TV’s memory.  
See page 8.  
6
NOTE: This connection will supply stereo sound to the TV if it is  
being broadcast by the station you are watching.  
ACITVE  
SOUND CONTROL PICTURE  
1 2  
ZOOM  
4
Making Basic Connections to theTV  
Antenna  
Connect the incoming antenna signal to the TUNER jack on the  
back of the TV. See page 8 for details on using Autoprogram to  
store channels in the TV’s memory.  
Back of TV  
NOTE: This connection will supply stereo sound to the TV if it is  
being broadcast by the station you are watching.  
DVI  
G
S-VIDEO  
L
R
V
DVI  
Pr  
R
Pb  
L
Y
V
G
S-VIDEO  
L
R
V
Pr  
R
Pb  
L
Y
V
R
R
L
L
R
R
L
L
R
L
V
G
S-VIDEO  
RGB+HV  
Incoming  
Antenna  
Signal  
Pr  
Pr  
Pb  
Pb  
Y
Y
R
R
L
L
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
R
L
V
G
S-VIDEO  
RGB+HV  
Pr  
Pr  
Pb  
Pb  
Y
Y
R
R
L
L
STANDARD/  
HD INPUTS  
TUNER  
STANDARD/  
HD INPUTS  
Connect the incoming  
Antenna signal to the  
TUNER jack on the  
back of the TV.  
Operating theTV  
Your television has a set of buttons located on the top of the  
cabinet for use when the remote control is not needed or  
unavailable.  
Press the Standby–On button to turn the TV on.  
1
NOTES:  
Due to the complexity and advanced design of the  
Cineos TV, a turn-on time of 16 seconds should be expect-  
ed.  
When you turn the TV off, it remains in Active Standby  
mode (orange light on) for 30 seconds and will not respond  
to any presses of the remote control or cabinet buttons  
during that time. This is to protect the lamp.  
2
3
4 4 4  
Press the VOLUME + (up) button to increase the sound  
MENU  
VOLUME  
CHANNEL  
level or the VOLUME – (down) button to lower the sound  
2
level. Or use the buttons to navigate right or left when the  
on-screen menu is displayed.  
Cabinet Buttons  
Press the CHANNEL K (up) or L (down) button to select  
TV channels. Or use the buttons to navigate up and down  
when the on-screen menu is displayed.  
1
3
Active ControlPlus+ Window  
This window contains a sensor that monitors the ambient  
light conditions in the room and adjusts key picture settings  
for best viewing.  
To access the on-screen menu, press the MENU button. To  
navigate the menu, use the VOLUME + (up)/– (down) and  
CHANNEL K (up)/L (down) buttons to navigate the menu  
as described in the previous steps.  
4
Remote Sensor Window  
Receives commands from the remote control.  
Active Standby Window  
Active Standbythe condition in which the TV is either in  
the process of turning on or off. Active Standby is entered by  
pressing the Standby-On button 2 on the TV or remote  
control. An orange light appears in the window. Active  
Standby mode occurs when the TV is turned on—to allow  
for the automatic calibration of the clock—and for 30 sec-  
onds after the TV has been powered off. The 30-second  
Active Standby period at power off is to protect the lamp.  
During this time, the TV will not respond to presses of cabi-  
net or remote control buttons.  
HELPFUL HINT  
The Cabinet button panel is protected during shipping by a  
adhesive plastic film. You may peel this off and discard it.  
On—the TV has picture and sound. A green light shows in  
the window.  
Standby—the condition in which the TV is plugged into the  
AC outlet and is in the off state. No light is on in the win-  
dow. The TV’s microprocessors and their standby supplies  
are the only active components in this state, and the power  
consumption is less than 1 watt.  
5
Using the Remote Control  
Remote Control  
(shown from the bottom)  
REMOTE CONTROL BATTERIES  
To load the supplied batteries into the remote:  
Remove the battery compartment door on the back of  
1
the remote.  
1
Place the batteries (2-AA) in the remote. Be sure the (+)  
and (–) ends of the batteries line up correctly (the inside of  
the case is marked).  
HELPFUL HINT  
When the batteries in your remote  
control run low, the remote control  
will send a “Battery low” command  
to the TV. The TV will then display  
a message on the screen reminding  
you to replace the batteries as soon  
as possible.  
2
Reattach the battery compartment door.  
3
2
Be sure to point the remote at the Remote Sensor window on the  
front of the television when using the remote control to operate the  
television.  
3
REMOTE CONTROL BUTTONS  
Source Select  
Press to display a list of input source options—TV, AV1, AV2,  
AV3–AV6, or Side. Use the Cursor Up/Down buttons to select the  
next item, then press the OK button to confirm or press the Source  
Select button to select the next item in the list. (See page 21 in the  
Directions for Use.) The source becomes active on the TV screen.  
PowerStandby  
Press to turn the TV on or off. NOTE: The TV is never powered  
off completely unless it is unplugged.  
Alternate Audio  
When you tune to a channel where SAP (Second Audio Program) is  
available, you can toggle between Main and SAP. If not available,  
only Main can be selected. (See page 42 in the Directions for Use.)  
Mode (TV, CBL,VCR,AMP, HD, SAT, DVD, or CD)  
Press one of these buttons to use the remote control in the TV, CBL,  
VCR, or AMP mode as indicated above the button. A green indicator  
lights up. Press the same button again more than 1 second to use the  
remote control in the mode indicated below the button (HD, SAT,  
DVD, or CD). A red indicator lights up. Press the button again more  
than 1 second to return to the function named above the button. (See  
pages 22–23 in the Directions for Use.)  
VCR Prog (functional only inVCR mode)  
Many VCRs have an automatic programming function. If your  
VCR has this function, the universal code set will assign it to this  
function. (See page 26 in the Directions for Use.)  
Surround Sound  
Press to toggle the sound modes Incredible Surround™ and Dolby*  
Virtual. (See page 41 in the Directions for Use.)  
Picture Format  
EXIT  
Press to display a list of available picture formats for showing video  
images in the traditional 4:3 proportions. Press this button repeatedly  
to select another picture format. Choose from Automatic, Super  
zoom, Panoramic, 4:3, Movie expand 14:9, Movie expand 16:9, 16:9  
subtitle, and Wide screen. (See pages 35–36 in the Directions for Use.)  
Press this button to exit the menus provided by universal devices  
such as VCRs, satellite receivers, DVD players, and so forth.  
INFO +  
Press to display (when available) information about the current  
channel, program, source, number or name, local time, CC avail-  
ability, SAP availability, program ratings, display format, sound  
mode, and remaining length of a Sleeptimer setting.  
NOTES:  
With AV3–AV6 connections, the Automatic picture format option  
is not available.  
CC (Closed Captioning)  
In Dual-screen mode, press the Picture Format button to switch  
between a full or 4:3 letterbox picture format.  
Press to select On, Off, or On with Mute. (See page 47 in the  
Directions for Use.)  
Natural Motion™  
Cursor Up, Down, Right, and Left  
Use to navigate the on-screen menu and make control adjustments  
or settings.  
Additionally, use these buttons to pan the screen up or down to  
show any excluded parts of the picture. Left or right panning is  
possible with the Side input source when “Game” is selected as the  
type of source for the Side input. (See page 21 in the Directions for  
Use manual.)  
This button is not applicable to the Cineos Television. Select the  
Digital Natural Motion™ option through the on-screen menu. (See  
page 30 in the Directions for Use.)  
Freeze Format  
Pressing will apply one of the Freeze modes.  
NOTE: The Freeze mode must be set using the TV’s on-screen menu.  
Freeze mode stops action in the main screen. Sound will continue  
to be heard. Press again to resume normal viewing.  
Replay mode displays a few seconds of stored video in the  
PIP window.  
Photo Finish mode displays six stored frames from the picture.  
Continuing to hold the Freeze Format button down will cycle the TV  
through the Freeze modes: Freeze, Replay, and Photo Finish.  
(See page 61 in the Directions for Use.)  
Also use with the Dual Screen/PIP feature to select a screen or  
reposition a PIP screen.  
Menu  
Press to display the TV’s on-screen menu or to turn it off.  
CH (Channel Selection)  
Press to browse through the TV channels.  
Digit (Number Buttons)  
Press to directly access a specific TV channel. For a two- or three-  
digit channel, enter all numbers. Press a single-digit button and  
hold for 1 second to directly access a single-digit channel. These  
buttons can also be used to enter values in certain on-screen menu  
controls.  
DNR (Dynamic Noise Reduction)  
Press this button repeatedly to select Off, Minimum, Medium, or  
Maximum. (See page 32 in the Directions for Use.)  
OK  
Press to activate your choice or to confirm settings when in the menus.  
Backlight  
Volume (VOL)  
Press + or – to adjust the volume.  
Press this button on the right side of the remote control. The back-  
lighting of the buttons VOL, CH, H, and the digit buttons stays on  
for 5 seconds after pressing the button.  
Mute  
Press to interrupt or restore sound.  
Active ControlPlus  
NOTE: Active Control™ Plus is not available for use with the  
AV3, AV4, AV5, and AV6 input sources.  
Surf (AutoSurf)  
If you set the Surf control in the TV’s on-screen menu to two chan-  
nels, this button will allow you to toggle between the current chan-  
nel and the last viewed channel. If you choose the nine-channel  
Surf, pressing this button allows you to add and scroll up to nine of  
your favorite channels. (See page 58 in the Directions for Use.)  
Press to toggle the options Off, Minimum, Medium, and Maximum.  
Maximum is the recommended option. (See page 27 in the  
Directions for Use.)  
Zoom  
NOTE: Zooming is disabled in Dual Screen mode.  
VCR  
Press the Zoom button to activate the zoom function. Press the OK  
button repeatedly to select one of the zoom magnifications (1x, 4x,  
9x, or 16x). Additionally, you can shift the selected zoom window  
over the screen with the Cursor Up, Down, Left, or Right buttons.  
The zoom window is reset after selecting another TV channel,  
another picture format, or when another display format is selected  
automatically. Press the Zoom button again to turn off the zoom  
function. (See page 28 in the Directions for Use.)  
When the remote is in the VCR mode, these buttons will allow you  
start a recording (G), rewind a tape (ᮤᮤ), stop the playback of a  
tape (I), play a videotape (), fastforward a videotape (ᮣᮣ),  
use the VCR timer (y), or pause the playback of a videotape (❙ ❙).  
(See page 26 in the Directions for Use.)  
Sound (AutoSound)  
Press to select the next item in the AutoSound™ menu. The facto-  
ry-set options are Speech, Music, Movies, and Multimedia, each  
corresponding with specific settings of treble and bass. You can  
also select the Personal option, which is based on the adjustments  
you make through the Sound menu. (See page 46 in the Directions  
for Use.)  
Picture AutoPicture)  
Press to select the next item in the AutoPicture™ menu. The facto-  
ry-set options are Rich, Natural, Soft, Multimedia, and Eco, each  
corresponding with specific factory settings of Contrast, Color,  
Sharpness, DNR, Dynamic Contrast, and Color enhancements. You  
can also select the Personal option, which is based on the adjust-  
ments or settings you make through the Picture menu. (See page 34  
in the Directions for Use.)  
Dual Screen/PIP (Picture-in-Picture)  
Press to turn the PIP dual screen on or off. Continuing to hold the  
Dual Screen/PIP button down will cycle through the Dual  
Screen/PIP options. (See pages 59–60 in the Directions for Use.)  
PIP Swap  
Press to swap the main picture with the PIP window picture, or to  
swap the left and right screens when in Dual Screen PIP mode.  
Press again to restore pictures to their original position.  
MultiPIP  
The first press of this button displays PIP3 (the default option). A  
long press of the button cycles through PIP3 and PIP6. Another  
press turns PIP off.  
Active Control, AutoPicture, AutoSound, AutoSurf, Incredible Surround,  
and Natural Motion are trademarks of Philips Consumer Electronics.  
Copyright 2003 Philips Consumer Electronics. All rights reserved.  
*Manufactured under license from Dolby Laboratories. “Dolby” and the  
double-D symbol are trademarks of Dolby Laboratories.  
6
Using the On-screen Menu  
The TV’s on-screen menu controls are viewed within a  
The first time you turn on the TV after purchasing it, it will be in a special mode designed to  
inform you that you can change the menu language and on-screen displays to English, French, or  
Spanish. Also included in this mode is Autoprogram to encourage you to have the set program  
channels into the TV’s memory. For more details on the Language and Autoprogram features, see  
page 8.  
mobile map or pipe system. This system allows you to  
move along linked paths tied to specific Feature Title cate-  
gories (“TV,” “Picture,” “Sound,” “Features,” and  
“Channels”). Each press of a Cursor button on the remote  
moves the cursor control to balls indicating specific con-  
trols. Each specific control may have multiple features that  
can be adjusted or set. The animated on-screen menu struc-  
ture will expand to show all available on-screen controls. As  
it expands, it will display a series of balls grouped together  
to reveal more controls.  
Picture Sound Features Channels  
Picture Sound Features Channels  
TV  
Settings  
Demo  
TV  
Settings  
Demo  
Puck  
Balls  
Pipes represent the structure of the on-screen menu. They  
Install  
Install  
Pipes  
tie all the controls together and show the path you can fol-  
low to access the available controls.  
Feature Titles  
or Controls  
1
Balls indicate the titles of features or controls available on  
this television. When highlighted, some of these controls  
2
may show more Pipes and Balls, indicating subcategories  
or lists of controls within the highlighted control. These  
subcontrols will also have Pipes and Balls.  
Picture Sound Features Channels  
The Puck tells you which way movement may take place  
within the on-screen menu. The arrows on the Direction  
Indicator simulate the Cursor buttons on the remote control  
(Up, Down, Left, or Right).  
TV  
Settings  
Demo  
3
1
2
3
The Slider controls will be displayed on some features,  
allowing adjustments to the values of the controls. Some  
may show a box containing a list of multiple options set-  
tings. Others may have only an “On” or “Off” option.  
6
5
Install  
4
To navigate the on-screen menu, start by pressing the Menu  
button on the remote control. This will display the on-  
screen menu in its starting position.  
5
6
Press the Cursor Down button to select any of the Setting,  
Demo, or Install controls. Starting from the TV item, press  
the Cursor Right button on the remote control to select any  
of the Picture, Sound, Features, or Channel controls.  
Picture Sound Features Channels  
TV  
6
Contrast  
40  
Brightness  
Color  
See the “Using the Demo Mode” and “Using the Installation  
Features” on this page and the next. Refer to the Directions for  
Use manual for all other control descriptions (Picture, Sound,  
Features, Channels, or Settings).  
4
ACITVE  
SOUND CONTROL PICTURE  
Sharpness  
1 2  
ZOOM  
HELPFUL HINT  
Pressing the Menu button once will display the on-screen menu.  
Pressing the Menu button any time the on-screen menu is dis-  
played will remove the on-screen menu from the TV screen.  
Using the Demo Mode  
Several features of this television can be placed in a demo  
Picture Sound Features Channels  
mode, which will show you how the feature works. Auto  
Demo will automatically show all the feature demos one  
after another except for the Dealer Demo mode. Specific  
demo modes can be selected from the list of options within  
the Demo control (Auto demo, Dual screen, PIP, and Install,  
for example).  
TV  
Settings  
Demo  
TV  
Settings  
Demo  
Auto demo  
Dual screen  
Freeze-Replay-Photo finish  
Install  
Main Menu  
Picture  
- - -  
Install  
Install  
3
5
4
The Dealer Demo also has a sublist of the following  
options: Digital options, Lightsensor, and 3D Y/C Comb  
filter.  
Press the Cursor Down button to see  
more Demo Mode options.  
Press the Menu button on the remote control to show the  
on-screen menu.  
Auto demo  
Dual screen  
Freeze-Replay-Photo finish  
Install  
Main Menu  
Picture  
- - -  
1
2
3
4
Demo  
1
2
Freeze-Replay-Photo finish  
Install  
Press the Cursor Down button repeatedly until “Demo”  
is selected.  
Demo  
Main Menu  
Picture  
Active Control  
Dealer demo  
4
Press the Cursor Right button to shift the menu to display  
the list of Demo mode options.  
ACITVE  
SOUND CONTROL PICTURE  
Press the Cursor Down or Up button to select a Demo  
mode option.  
1 2  
ZOOM  
To see the Dealer Demo sublist,  
press the Cursor Down button to  
select Dealer Demo, then press the  
Cursor right. Press the Cursor  
Down or Up to select a mode, then  
press the Cursor Right to activate  
the mode.  
Press the Cursor Right button to activate the Demo.  
Dealer demo  
Digital options  
Lightsensor  
3D Y/C Comb filter  
5
7
Using the Installation Features  
Language  
When you plug in your TV for the first time it will prompt  
you to set the Language and Autoprogam the channels.  
Language  
Autoprogram  
For Spanish- and French-speaking TV owners, an on-screen  
Language option is present. The Language control enables  
you to set the TV’s on-screen menu to be shown in either  
English, Spanish, or French.  
Press the cursor down to select  
your menu language  
English  
Français  
Español  
Press the Cursor Down button to select English, Español  
(Spanish), or Francais (French).  
2
1
Language  
Autoprogram  
After you have made your language selection, press the  
OK button to confirm your selection.  
OK  
Select your menu language with  
the cursor up/down.  
2
English  
3
Français  
Español  
Press the MENU button to remove the on-screen menu  
from the TV screen or continue with Autoprogramming  
below.  
Press the OK key on the remote  
control to confirm.  
1
3
ACITVE  
Language  
Autoprogram  
SOUND CONTROL PICTURE  
HELPFUL HINT  
The language you have chosen is  
English  
English  
Français  
Español  
1 2  
Remember, the Language control makes only the TV’s on-  
screen Menu items appear in English, Spanish, or French text.  
It does not change the other on-screen text features, such as  
Closed Captioning (CC), with TV shows.  
ZOOM  
Autoprogram  
Your TV can automatically set itself for local area (or cable  
TV) channels. This makes it easy for you to select only the  
TV stations in your area by pressing the CH + or – button  
on the remote control.  
Autoprogram  
Autoprogram  
Keep the prede-  
fined automatic  
detection of  
cable or anntenna  
or make your own  
selection.  
The TV will search for, find and store  
all the available channels.  
Press the cursor down to proceed.  
Automatic  
Install mode  
Install  
Install mode  
Install  
Press the Cursor Down button to select “Install” mode  
control.  
2
1
2
3
4
6
Press the Cursor Right button to display a list of Install  
mode options: “Antenna,” “Automatic,” “Cable.”  
Autoprogram  
Autoprogram  
Antenna  
Automatic  
Cable  
Automatic  
Install mode  
Install  
Install mode  
Install  
Press the Cursor Up or Down button to select one of the  
options. Select “Antenna” for normal outside- or inside-  
type antenna. Select “Cable” for a cable company sup-  
plied signal. When “Automatic” is selected, the TV will  
automatically set the mode based on the type of signal it  
detects coming into the TV. The programming process  
may be faster if you choose the specific type of connec-  
tion you have made, either Antenna or Cable.  
1
2
7
3
5
Autoprogram  
Autoprogram  
Install mode  
Install  
Install mode  
Install  
ACITVE  
SOUND CONTROL PICTURE  
Start  
Searching  
Press the Cursor Left button after making your “Install”  
mode selection.  
1 2  
4
24 analog channels found  
ZOOM  
To Autoprogram Analog channels, press the right arrow.  
Press the Cursor Down button to select “Install.”  
5
Press the Cursor Right button to start the programming  
process.  
Autoprogram  
6
Install mode  
Install  
Start  
Press the Menu button to remove the on-screen menu from  
the TV screen when the Autoprogramming process has fin-  
ished.  
60 analog channels found  
Autoprogramming is complete  
7
HELPFUL HINT  
After Autoprogram is finished, check the results. Press the CH  
(+) or (–) button on the remote control to see which channels  
you can select. See page 51 in the Directions for Use manual  
for instructions on removing channels.  
8

I Tech Company Sunlight Readable LCD Monitor User Manual
Lenovo THINKCENTRE 6397 User Manual
Motorola MD780 Series User Manual
Motorola System Expansion Cordless Handset SD4502 User Manual
Moxa Technologies UPORT 1600 User Manual
Mr Handsfree Genius User Manual
Panasonic NN CS597S User Manual
Philips 14 PT 1686B User Manual
Philips 29PT5306 User Manual
Philips 200WB7 User Manual