Philips 7819901519 User Manual

1 Connect Cable Converter/Satellite Receiver to RF-IN jack on  
1 Connect Antenna or Cable service to RF-IN jack on the unit  
the unit using RF cable (see picture below).  
using RF cable (see picture below).  
2 Connect DVD Recorder to your TV set using AV cable (see  
picture below).  
If you need to use a setup box, cable converter or satellite receiver  
to receive TV signal, skip channel setup in STEP 3 on the next page.  
2 Connect DVD Recorder to your TV set using AV cable (see  
picture below).  
Thank you for purchasing PHILIPS DVD Recorder.  
Please follow the step-by-step instructions to  
connect and set up your new DVD recorder.  
3 If you have other AV sources you wish to connect to this DVD  
recorder, see panel A, B, C below for reference.  
3 If you have other AV sources you wish to connect to this DVD  
recorder, see panel A, B, C below for reference.  
4 Attach power cord to the DVD recorder and then connect to  
the wall outlet (see picture on the right).  
4 Attach power cord to the DVD recorder and then connect  
to the wall outlet (see picture on the right).  
Please complete these recommended steps  
before using your recorder. For more advanced  
setups and operations, please refer to the  
User's Manual. If you encounter any problem  
setting up or operating this DVD recorder,  
please refer to the Troubleshooting” section  
in the User's Manual before contacting technical  
support.  
5 Press POWER key on the remote or front panel to turn on the  
DVD recorder.  
5 Press POWER key on the remote or front panel to turn on  
the DVD recorder.  
6 Turn on your TV and switch to proper input.  
6 Turn on your TV and switch to proper input.  
7 Proceed with Step 3  
on the back page  
7 Proceed with Step 3  
on the back page.  
1 Connect VCR to the DVD recorder using AV cable (see picture  
1 Connect DV to the DVD recorder using DV cable (see  
below).  
picture below).  
1 Connect Camcorder to the DVD recorder using AV cable  
2 Connect the power cords of both VCR and DVD recorder to  
the wall power outlet. Turn the VCR and the DVD recorder  
on.  
2 If the DVD recorder is not connected to a TV set, return to  
(see picture below).  
the Connection Guide above to continue connecting the  
2 If the DVD recorder is not connected to a TV set, return  
to the Connection Guide above to continue connecting  
the recorder to TV.  
recorder to TV.  
Note: For advanced connections, please refer to the Connecting Upsection (p.6) in the User’s Manual.  
P/N 7819901519  
1 Press SETUP key on the remote to enter the Setup menu screen.  
2 Use the /key on the remote to highlight “Language” and press  
OK key on the remote to select.  
1 Press OPEN/CLOSE key to open the disc tray. Place the enclosed blank DVD disc on  
the disc tray. Press OPEN/CLOSE key to close the disc tray.  
3 Use the /key on the remote to highlight “OSD (On-Screen Display)”  
It may take a few minutes for the DVD recorder to prepare the disc for recording.  
2 Press TOOLS key to display the “TOOLS” menu.  
and press OK key to select.  
.
4 Use the /key on the remote to highlight your desired language and  
press OK key on the remote to select.  
3 Select “Record” and press OK key to confirm.  
5 Press SETUP key to exit.  
4 Select a source and press OK key to confirm.  
If “TV” is selected, select the channel number and press OK key to confirm.  
5 The DVD recorder will automatically detect the disc you have inserted, and suggest  
a suitable format for recording. If the suggested format is not what you wish to use,  
press /key to select “Change Disc” and then press OK to confirm.  
6 Select a desired recording mode and press OK key to confirm.  
HQ - High Quality (1 hr/disc)  
1 Press SETUP key on the remote to enter the Setup menu screen.  
2 Use the /to highlight “TV Tuner” and press OK to select.  
SP - Standard Play (2 hrs/disc)  
SPP - Standard Play Plus(2.5 hrs/disc)  
LP - Long Play (3 hrs/disc)  
3 Use the /to highlight an item from the list of options and press  
OK to select.  
SPP (4.7GB ~2.5Hrs)  
2.5  
When selecting TV signal, choose:  
EP - Extended Play (4 hrs/disc)  
• “Antenna”, if you are using a standard antenna to receive TV signal.  
• “Cable”, if you are using basic cable to receive TV signal.  
(For detailed TV signal options, please refer to the “Getting Started” section (p.12)  
in the User’s Manual.)  
SLP - Super Long Play (6 hrs/disc)  
7 Press OK key to start recording.  
To pause recording, press PAUSE/STEP key.  
To resume recording, press PAUSE/STEP key orREC key.  
To view the status of your recording, press DISPLAY key.  
4 Use the /to highlight “Utilities” and press OK to select. Press OK again to start “Scan Channel”.  
It will take a few minutes for this DVD recorder to scan for channels provided in your area. You may see the picture change  
in the on-screen small window while the system is scanning for channels. Once scanning is completed, the window will be  
tuned to the first channel available.  
8 To stop recording, press STOP key.  
It may take a few seconds for the DVD recorder to stop the recording.  
5 Press SETUP to exit.  
9 To view what you've recorded, press PLAY key, select the thumbnail for the desired  
show and press OK key to confirm.  
The “Easy Guider” menu makes features  
like recording, timer recording and finalizing  
a snap.  
Before you take the disc recorded on this DVD recorder to other players, you  
must finalize it (except for DVD+RW discs)  
1 Press SETUP key on the remote to enter the Setup menu screen  
2 Use the /keys to select “Date/Time” and press OK key.  
1 Press TOOLS to display the “Easy Guider” menu.  
2 Select “Disc Tools”, then “Finalize” and press OK key to confirm.  
3 Press ENTER key to start finalizing.  
DATE/TIME  
3 Use the /keys to select “Date” and press OK key.  
4 Use the /and the /keys to set the month, day, year and press  
OK key to confirm.  
5 Use the /keys to select “Time” and press OK key.  
6 Use the /and the /keys to set the hour, minute, second and  
AM/PM and press OK key to confirm.  
• Once you finalize a disc, you cannot add any more recording on the disc.  
• Disc finalization may take a few minutes to complete.  
• The disc will now play on most DVD playback device.  
For more details on supported disc types and file formats, please refer to the  
“Overview” section (p.4) in the User's Manual.  
7 Press SETUP key to exit.  
1. Refer to “Troubleshooting” section (p.38) in the User’s Manual  
2. Check out www.philips.com/support  
3. Contact Optimal Customer Care at 0800-231-099  

JVC DR M70SU User Manual
KitchenAid KECC507GAL2 User Manual
Motorola L704M Cordless Phone MOTO L704 User Manual
Motorola MD40 User Manual
NEC NLT 26HD1 User Manual
NEC R 37 Xtra User Manual
Pelco Computer Keyboard KBD4000 User Manual
Philips 14PT2115 User Manual
Philips 28PT562A User Manual
Philips CD4403B User Manual