Philips 47PFL7422 User Manual

32PFL7422  
37PFL7422  
42PFL7422  
47PFL7422  
37HF7005  
User Manual  
Q uick Start Guide Inside !  
用戶手冊  
內附快速使用指南!  
Model No.:  
Serial No.:  
P41TP002813 1G  
37PFL7422/37HF7005  
42PFL7422/47PFL7422  
32PFL7422  
32PFL7422  
L
Y
Y
Pb  
Pb  
Pr  
Pr  
L
R
R
CVI 2  
CVI 1  
AUDIO  
IN  
VIDEO  
IN  
D-SUB  
PC IN  
AUDIO  
IN  
R
AUDIO  
S-VIDEO  
AV  
L
AC IN  
AUDIO  
IN  
HDMI 2  
HDMI 1  
SPDIF  
OUT  
AC IN  
AC IN  
HDMI 2  
HDMI 1  
PC IN - 音頻輸入, D-SUB  
HDMI 2  
HDMI 1  
PC IN -Audio input, D-SUB  
CVI 2 - 分量視頻 (YPbPr), 左/右音頻輸入  
CVI 1 - 分量視頻 (YPbPr), 左/右音頻輸入  
AV - 視頻輸入, S 視頻, 左/右音頻輸入, 左/右音頻輸出  
SPDIF 輸出  
CVI 2 - Component video (YPbPr), Audio L/R input  
CVI 1 - Component video (YPbPr), Audio L/R input  
AV -Video input, S-video, Audio L/R input  
SPDIF output  
75 /RF  
Side AV - S 視頻, 左/右音頻輸入, 視頻輸入, 耳機  
75 /RF  
SideAV - S-video, Audio L/R input, Video input, Earphone  
37PFL7422/37HF7005/42PFL7422/47PFL7422  
L
L
Y
Pb  
Pr  
Pr  
L
R
R
SPDIF  
OUT  
CVI 2  
AUDIO  
IN  
VIDEO IN  
S-VIDEO  
D-SUB  
AUDIO  
OUT  
AUDIO  
IN  
R
R
AUDIO  
VIDEO  
OUT  
Y
Pb  
L
AC IN  
CVI 1  
AUDIO  
IN  
PC IN  
HDMI 2  
HDMI 1  
AV  
AC IN  
AC IN  
HDMI 2  
HDMI 1  
PC IN - 音頻輸入, D-SUB  
HDMI 2  
HDMI 1  
PC IN -Audio input, D-SUB  
CVI 2 - 分量視頻 (YPbPr), 左/右音頻輸入  
CVI 1 - 分量視頻 (YPbPr), 左/右音頻輸入  
AV - 視頻輸入, S 視頻, 左/右音頻輸入,  
左/右音頻輸出, SPDIF 輸出, 視頻輸出  
75 /RF  
CVI 2 - Component video (YPbPr), Audio L/R input  
CVI 1 - Component video (YPbPr), Audio L/R input  
AV -Video input, S-video, Audio L/R input,  
Audio L/R output, SPDIF output, Video output  
75 /RF  
Side AV - S 視頻, 左/右音頻輸入, 視頻輸入, 耳機  
SideAV - S-video, Audio L/R input, Video input, Earphone  
Cover & Connection 2  
Quick start quide  
Cable Box With  
室內或室外天線  
(VHF/UHF組合)  
Outdoor or Indoor Antenna  
(Combination VHF/UHF)  
1
RF In / Outputs  
Antenna TV  
分線盒  
or 或者  
Antenna  
(帶有RF輸入/輸出)  
天線電視  
with 75cable  
天線(75W電纜)  
TV  
電視  
Twin-lead wire  
to 300-75adapter  
接300-75W  
適配器的扁平雙線  
or  
或者  
來自有線電視公司  
的有線電視信號  
The Cable TV signal  
from Cable Company  
RF  
B
75 coaxial cable  
A
75  
同軸線  
*After setting up, please run the Auto store  
function to set up theTV for the broadcast  
or cable channels available in your area.  
(please go to page10 for detail)  
OUTPUT  
CH  
3
4
CABLE  
IN  
TO  
TV  
*在設置之後,請進行自動搜尋功能在電視  
上設置您所在區域的廣播或有線頻道。  
(詳細信息,請參見第10頁。)  
Cable Box  
分線盒  
Cable Box With  
Audio / Video Outputs  
2
L
Y
Y
Pb  
Pr  
Pr  
L
R
R
AUDIO  
IN  
CVI 2  
CVI 1  
VIDEO IN  
分線盒  
(帶有聲音/視頻輸出)  
AUDIO  
IN  
R
S-VIDEO  
Pb  
L
AUDIO  
IN  
AV  
TV  
電視  
B
C
S-Video  
OUTPUT  
CH  
3
4
L
R
VIDEO  
OUT  
AUDIO  
OUT  
CABLE  
IN  
TO  
TV  
S VIDEO  
Cable Box  
分線盒  
A
Cable TV Signal  
有線電視信號  
D
Composite  
Audio/Video Input  
*Use the AV button on the remote control to tune  
to the AV channel for the cable box signal. Once  
tuned, change channels at the cable box,  
i
+
AV  
not the television.  
*使用遙控器上的AV按鈕調到分線盒信號的AV頻道。  
調整後,在分線盒(而不是電視)上更換頻道。  
AV Button  
AV按鍵  
Cover & Connection 3  
VCR, DVD Player, Or  
Other Devices With  
RCA Connectors  
3
L
Y
Y
Pb  
Pb  
Pr  
Pr  
L
R
R
AUDIO  
IN  
CVI 2  
CVI 1  
VIDEO IN  
S-VIDEO  
AUDIO  
IN  
R
L
VCR, DVD播放機或帶有  
RCA 連接器的其它設備  
AUDIO  
IN  
AV  
TV  
電視  
B
A
S-Video  
Composite  
Audio/Video Input  
AV Player with A/V connectors  
帶有A/V接口的AV播放機  
C
*Use AV button on the remote control to select  
AV or Side AV if you use the different jacks for the  
hookup to watchVCR.  
i
+
AV  
*使用遙控器上的AV按鈕選擇AV(如果此連接方式使用  
不同的插孔),還可選擇Side AV以觀看VCR內容。  
AV Button  
AV按鍵  
DVD Player Or Other  
Video Devices With  
Component Video  
Connectors  
4
B
Y
Pb  
Pb  
Pr  
Pr  
L
R
R
AUDIO  
IN  
CVI 2  
TV  
電視  
Y
L
DVD播放機或其它帶有  
Component視頻連接器  
的視頻設備  
AUDIO  
IN  
CVI 1  
A
Component  
Video Input  
Accessory device equipped with  
component video outputs  
帶有Component視頻輸出的附屬設備  
C
*Use AV button on the remote control to select CVI1 or  
CVI 2 to watch DVD.  
Note:TheY, Pb, Pr jacks do not provide audio, so  
audio cables must be connected to provide sound.  
*使用遙控器上的AV按鈕選擇CVI1或者  
i
+
AV  
CVI2以觀看DVD。  
注意:Y,Pb,Pr插孔不提供音頻,  
必須連接音頻線才能提供聲音。  
AV Button  
AV按鍵  
Cover & Connection 4  
PC (Monitor)  
Connections  
5
Y
Y
Pb  
Pb  
Pr  
Pr  
L
R
R
AUDIO  
IN  
CVI 2  
CVI 1  
D-SUB  
PC IN  
PC (顯示器)連接  
AUDIO  
L
AUDIO  
IN  
TV  
電視  
B
A
Computer  
計算機  
C
i
+
AV  
*Use AV button on the remote control to select PC to use your LCDTV  
as a PC monitor.  
*使用遙控器上的AV按鈕選擇PC,以將液晶電視用作PC顯示器。  
AV Button  
AV按鍵  
DVD Player With  
HDMI Connector  
帶有HDMI 連接器的  
DVD播放機  
6
D-SUB  
AUDIO  
TV  
電視  
HDMI 2  
HDMI 1  
PC IN  
A
HDMI  
DVD player  
DVD 播放機  
B
*Use AV button on the remote control to select HDMI 1  
or HDMI 2 to watch DVD.  
*使用遙控器上的AV按鈕選HDMI1或者HDMI2以觀看DVD。  
i
+
AV  
AV Button  
AV按鍵  
Cover & Connection 5  
Welcome  
Know these  
safety symbols  
Congratulations on your purchase,  
and welcome to the “family!”  
Dear PHILIPS product owner:  
Thank you for your confidence in PHILIPS. You’ve  
selected one of the best-built, best-backed products  
available today.We’ll do everything in our power to  
keep you happy with your purchase for many years to  
come.  
This “bolt of lightning” indicates  
uninsulated material within your unit  
may cause an electrical shock. For the safety  
of everyone in your household, please do not  
remove product covering.  
The “exclamation point” calls attention to  
features for which you should read the  
enclosed literature closely to prevent operating  
and maintenance problems.  
WARNING: To reduce the risk of fire or  
electric shock, this apparatus should not be  
exposed to rain or moisture and objects filled  
with liquids, such as vases, should not be placed  
on this apparatus.  
CAUTION: To prevent electric shock, match  
wide blade of plug to wide slot, fully insert.  
For Customer Use  
Enter below the Serial No. which is located  
on the rear of the cabinet. Retain this  
information for future reference.  
Model No._______________________  
Serial No. _______________________  
1
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with a dry cloth.  
Tilt/Stability - All televisions must comply with  
16.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
recommended international global safety standards for tilt and  
stability properties of its cabinet design.  
• Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet which  
could ultimately overturn the product.  
Do not block any of the ventilation openings.  
Install in accordance with the manufacturers instructions.  
Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including ampli-  
fiers) that produce heat.  
Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades with  
one wider than the other. A grounding type plug has two  
blades and third grounding prong. The wide blade or third  
prong are provided for your safety. When the provided  
plug does not fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
Only use attachments/accessories specified by the  
manufacturer.  
Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the  
apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury  
from tip-over.  
• Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet. Such  
items could unsuspectingly fall from the top of the set and  
cause product damage and/or personal injury.  
Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer.  
8.  
9.  
17.  
Power Lines - An outdoor antenna should be located away  
from power lines.  
Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage  
surges and built up static charges.  
18.  
19.  
10.  
Object and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the enclosure  
through openings.  
Battery Usage CAUTION - To prevent battery leakage that  
may result in bodily injury, property damage, or  
damage to the unit:  
20.  
21.  
11.  
12  
• Install all batteries correctly, with + and - aligned as marked  
on the unit.  
• Do not mix batteries (old and new or carbon and  
alkaline, etc.).  
Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
13.  
14.  
• Remove batteries when the unit is not used for a long time.  
For ventilation, leave at least 4” to 6” free all around the TV.  
Do not place the TV on a carpet.  
Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
22.  
The equipment shall not be exposed to dripping or splashing.  
The equipment shall not be exposed to rain or moisture and  
objects filled with liquids, such as vases, shall be placed on the  
apparatus.  
23.  
24.  
Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
B. Objects have fallen, or liquid has been spilled into the  
appliance;  
The apparatus must be connected to a mains socket outlet  
with a protected earthed connection.  
The appliance coupler is used as the disconnect device of this  
apparatus, the disconnect device shall remain readily operable.  
15.  
25.  
26.  
C. The appliance has been exposed to rain  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance;  
E. The appliance has been dropped, or the enclosure  
damaged.  
2
 
Precaution  
ADDITIONAL SAFETY PRECAUTIONS  
• ENSURE that LCD TV stand is tightened properly to the set on the right way of tightening of  
the screw of the stand to the set. Improper tightening of screw may render the set unsafe.  
• If LCD TV is installed on the wall, installation should be carried out by qualified servicemen. Improper or incorrect  
installation may render the set unsafe.  
• Disconnect main plug when :  
— cleaning the TV screen, never use abrasive cleaning agents.  
— there is a lightning storm.  
— the set is left unattended for a prolonged period of time.  
• Do not shift or move the LCD TV around when it is powered on.  
• Do not touch, push or rub the surface of the LCD screen with any sharp or hard objects.  
• When the surface of the LCD screen becomes dusty, wipe it gently with an absorbent cotton cloth or  
other soft material like chamois. DO NOT USE acetone, toluene or alcohol to clean the surface of the screen.  
These chemicals will cause damage to the surface.  
• Wipe off water or saliva as soon as possible. These liquids can cause deformation and color fading of the  
LCD screen when left exposed for some time.  
• Be careful of condensation when temperature changes occur. Condensation can cause damage to the LCD  
screen and electrically parts. After condensation fades, spots or blemishes will be present on the LCD screen.  
POSITIONING THE LCD TELEVISION  
• Place the LCD TV on a solid, sturdy base or stand. Be sure the stand is strong enough to handle the weight of  
the LCD TV.  
• Try to leave at least 6” of space around each side of the LCD TV cabinet to allow for proper ventilation.  
• Do not place the LCD TV near a radiator or other sources of heat.  
• Do not place the LCD TV where it can be exposed to rain or excessive moisture.  
RECYCLING PROCEDURE/END OF LIFE DISPOSAL  
• To minimize harm to the environment, the batteries supplied with the LCD TV do not contain mercury or  
nickel cadmium. If possible, when disposing of batteries, use recycling means available in your area.  
• The LCD TV uses materials that can be recycled. To minimize the amount of waste in the environment, check  
your area for companies that will recover used televisions for dismantling and collection of reusable  
materials, or contact your dealer for TV recycling tips.  
• Please dispose of the carton and packing material through the proper waste disposal management in your  
area.  
3
Contents  
Welcome. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Wall mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Use of the remote control . . . . . . . . . . . . . . . . . . . . . . 6  
Buttons on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Here are a few of the special features of your new  
LCD TV.  
Audio/Video In Jacks: Use to quickly connect  
other  
equipment to your LCD TV.  
Automatic Channel Storing (Auto Store):  
Quick and easy setup of available channels.  
On-screen Menus: Helpful messages (inEnglish  
orSimplifiedChinese)forsettingTVcontrols.  
Remote Control: Works your LCD TV  
features.  
Sleep Timer: Turns off the LCD TV within an  
amount of time you specify (0-180 minutes from  
the current time).  
AutoLock: Lets you block viewing of certain TV  
channels if you do not want your children viewing  
inappropriate material.  
Standard broadcast (VHF/UHF) or Cable TV  
channel capability.  
How to navigate through the Settings menu  
9
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Install  
10  
10  
10  
11  
12  
12  
13  
14  
16  
18  
Select the menu language  
Store TV channels  
Manual sotre, Prog. no, Finetune, Store  
Channel setting, Channel edit, Channel swap,  
Name edit, Channel sort  
Factory reset  
Features menu  
Picture menu  
Sound menu  
Stereo capability: Includes a built-in amplifier  
and twin-speaker system, allowing reception of  
TV programs broadcast in stereo.  
Care of the screen See Tips, p. 26  
Record with your recorder. . . . . . . . . . . . . . . . . . . . . . 19  
Record a TV program  
19  
PC menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
End of life directives - Recycling  
Philips has paid a lot of attention to  
producing an environmentally friendly product.  
Your new TV contains several materials that can  
be recycled for new uses. At the end of its life,  
specialized companies can dismantle and recycle  
this set. This will minimize the amount of  
materials being disposed of. Please be sure to  
dispose of this set in accordance with all state  
and local regulations.  
Picture menu  
Sound menu  
Features menu  
20  
22  
23  
Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Pixel characteristics  
The LCD panel has a high number of colour pixels. Although it has effective pixels of 99.999% or more. Black dots or  
bright points of light (red, green or blue) may appear constantly on the screen. This is a structural property of display  
(within common industrial standard ) and is not a malfunction. This does not affect the performance of the product.  
4
 
Preparation  
Do not insert the power plug in a wall socket before  
all connections are made.  
Place the TV on a solid surface.  
For ventilation, leave at least 4” to 6” free all around the TV. Do  
not place the TV on a carpet. To prevent any unsafe  
situations, no naked flame sources, such as lighted candles,  
should be placed in the vicinity. Avoid heat, direct sunlight and  
exposure to rain or water. The equipment shall not be exposed  
to dripping or splashing.  
Mounting the TV on the wall  
This TV set complies with the VESA standard for wall mounting.  
Refer to specification page 27 for detail.  
Caution: Installing the TV requires special skills that should  
only be performed by qualified personnel. You should not  
attempt to do the work yourself. Philips bears no  
responsibility for improper mounting or mounting that  
results in accident or injury.  
Make sure that the wall mount is being fixed securely enough so  
that it meets safety standards.  
2
3
To connect accessory devices, see Cover and Connection.  
Refer to the bottom of the set (Model label) for the  
correct operation voltage.  
Insert the power cord into the wall socket.  
Consult your local dealer if your main power supply voltage is  
different than that indicated for the TV. Never place the TV  
on top of the (AC) cord. Placing the TV on top of the AC cord  
could cause a fire or electric shock.  
4
Remote control:  
Insert the two supplied AAA batteries.  
The batteries supplied do not contain the heavy metals mercury  
and cadmium. Please determine and comply with local  
regulations when disposing of depleted batteries.  
Turn the TV on:  
Press the power switch on the left side of the TV. An  
indicator on the front of the TV lights up.  
Press the POWER button on the remote control.  
5
Use of the remote control  
Note: Pressing most buttons once will activate the assigned function. Pressing a second time will de-activate it.  
When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.  
The list will be removed automatically after six seconds or press OK to remove immediately.  
POWER  
Press to turn the LCD TV on or off.  
Pixel Plus demo button  
Press to turn Pixel plus demonstration on  
or off.  
Picture Format button  
Press the FORMAT button repeatedly to toggle  
among the six screen format sizes:  
Super zoom, 4:3, Movie expand 14:9, Movie  
expand 16:9, 16:9 Subtitle, or WideScreen.  
Sleep button  
Press to set the LCD TV to turn itself off  
within a certain time.  
Smart Sound button  
Press repeatedly to select among the 5  
settings: Personal, Speech, Music, Movie, or  
Multimedia.  
I-II button / Sound mode  
Press repeatedly to select Mono, Stereo, Dual  
I, Dual II, Nicam Mono, Nicam Stereo, Nicam  
Dual I, Nicam Dual II.  
Note: The sound mode selections depond on TV  
program and broadcast TV channel of that region.  
Smart Picture button  
Press repeatedly to select either Personal,  
Rich, Nature, Soft, or Multimedia of picture  
setting.  
Incredible Surround button  
Adds greater depth and dimension to TV  
sound.  
Select from Incredible Surround ON or  
Incredible Surround OFF.  
MENU  
Press menu to activate on screen menu  
on/off.  
Mute button  
VOL +/-  
Press to eliminate or restore the LCD TV  
sound. Mute will appear on the screen when  
the sound is muted.  
Press + or - to adjust the volume.  
A/CH button  
Press to go to previously selected channel.  
P +/-  
Press to adjust the channel up or down.  
Information button  
Press to see the current channel number  
on the TV screen.  
Number button  
Press the number buttons for direct access to  
the TV channels. For 2 digit channel, enter the  
2nd digit after enter 1st digit.  
AV button  
Press to select the video input source:  
TV, HDMI 1, HDMI 2, CVI 1, CVI 2, AV, Side  
AV, and PC.  
6
FORMAT  
Press this button to display a list of available display formats.  
Available display formats are determined by the type of signal you  
are receiving.  
To choose the display format you prefer, press the FORMAT  
button repeatedly:  
For 32PFL7422, 37PFL7422, 37HF7005, 42PFL7422, and 47PFL7422  
Super Zoom, 4:3, Movie expand 14:9, Movie expand 16:9,  
16:9 Subtitle and Widescreen.  
Super zoom  
4:3  
Movie expand 14:9  
Movie expand 16:9  
16:9 Subtitle  
Widescreen  
16:9 Subtitle makes the picture fill the screen as much as  
possible. It is recommended to press the cursor up/down key to  
adjust the picture position on the screen and make subtitles visible.  
Note:  
• For 720p/1080i/1080p, the default picture format will be  
Widescreen at HD and HDMI modes. And the picture format  
function will not be accessible.  
* 32PFL7422 doesn’t support to 1080p.  
• For PC mode, the default picture format will be Full screen and  
picture format function can be accessible 4:3 and Full screen.  
7
Buttons on theTV  
Should your remote be lost or broken you can still change some  
of the basic settings with the control buttons on your TV.  
Press:  
•the  
button to switch the TV on or off.  
•the + VOLUME -button to adjust volume;  
•the + PROGRAM -buttons to select the TV channels or  
sources.  
The MENU button can be used to display the Settings menu  
without the remote control. MENU button can also Exit the  
menu.  
Use:  
•the + VOLUME - buttons and the + PROGRAM - buttons to  
select menu items in the directions as shown;  
•the + VOLUME button to confirm your selection.  
8
To use the menus  
Introduction  
When you use a menu or take an action, convenient instructions, help texts and messages will be displayed on your TV.  
Please, follow the displayed instructions and read the help text on the specific item highlighted.  
The color buttons perform different actions, when using on screen menu. By pressing the corresponding color button on  
the remote control to perform the required action when using these menus.  
How to navigate through the Settings menus  
Main Controls  
Picture  
4
Picture  
8
The Settings menu allows you to access and change  
settings and preferences settings.  
Smart picture  
Contrast  
Sound  
Features  
Install  
Brightness  
Color  
• Press the MENU button on the remote control to  
display the Settings menu.  
- Use cursor up/down to highlight and select a menu item  
on the left panel.  
Sharpness  
Color temp  
Contrast +  
Picture format  
The right panel shows the content of the menu you have  
highlighted in the left panel.  
Info  
Note: Sometimes not all the menu items are visible on the  
screen. Use cursor down to scroll down to additional items.  
- Use the cursor right to enter the right panel.  
The content of the right panel is moved to the left panel  
and the right panel shows the content of the newly  
highlighted item in the left panel.  
Note: In some cases, you will want to watch the picture on  
your screen while adjusting settings. This means that when the  
Main Controls  
Picture  
8
Smart picture  
Personal  
Rich  
5
Smart picture  
Contrast  
100  
50  
Brightness  
Color  
Nature  
highlight is on the right side panel, the other menu items are  
hidden. When the cursor left is pressed again, the hidden  
menu items re-appear and the highlight moves to the left  
panel.  
Soft  
50  
Multimedia  
Sharpness  
Color temp  
Contrast +  
Picture format  
30  
Info  
• Press the cursor left to go one menu level up again.  
- Press the OK button on the highlighted item to activate  
and to dismiss the menu.  
- Press the MENU button again to exit the Settings menu.  
Note: The menu is also dismissed by pressing one of the color  
buttons (if present) referring to certain actions which may be  
executed.  
9
TV menu-Install  
Select the menu language  
Main Controls  
Install  
Press the MENU button on the remote control.  
Use the cursor down to select Install in the Settings menu.  
Use the cursor right to enter the Install menu.  
5
Language  
English  
中文  
2
2
Language  
3
Auto store  
4 Select Language and enter the list of available languages with the  
Manual store  
Channel setting  
Factory reset  
cursor right.  
5
Select your preferred language with the cursor up/down and press  
the OK button to confirm your selection.  
Proceed with the Install menu.  
6
Info  
Store TV channels  
Main Controls  
Install  
5
Auto store  
Start ?  
Press the MENU button on the remote control.  
Language  
2
Use the cursor down to select Install in the Settings menu.  
Auto store  
Manual store  
Channel setting  
Factory reset  
3
Use the cursor right to enter the Install menu.  
Press cursor down to select Auto store in the Install menu.  
Use the cursor right to enter the Auto store menu and press OK  
4
5
to start scanning of channels.  
Info  
Auto store  
Please wait  
Prog. found  
Auto storing may take up to 3 minutes to complete. Please wait  
until Auto storing is completed . The TV will then switch  
automatically to the first channel found.  
0
Frequency 246.50 MHz  
Notes:  
• Immediately after unpacking and plugging in your new television, run the auto store function to set up the TV for the broadcast or  
cable channels available in your area. If you do not run the auto store function to set up the channels, your television may not  
operate properly.  
• After you’ve run Auto store, check out the results. Press P (+) or the P (-) button and see which channels you can select.  
• Remember, an antenna or cable TV signal must first be connected to your LCD TV.  
10  
Main Controls  
Install  
5
Manual store  
Manual store  
Prog. no  
4
Language  
Auto store  
Manual store  
Manual store  
Channel setting  
Factory reset  
Finetune  
Select Manual store in the Install menu.  
Store  
2
Press the cursor right to enter Manual store, and press the  
cursor right again to activate auto search channel frequence or  
press number buttons to show your desired channel frequence.  
Use the cursor right to start searching.  
Main Controls I Install  
Manual store  
4
Manual store  
xxx.xx MHz  
Start?  
Manual store  
Prog. no  
Finetune  
Store  
50  
3
Info  
Info  
Main Controls I Install  
Manual store  
4
Prog. no  
Prog. no  
Manual store  
Prog. no  
Finetune  
Store  
2
Select Prog. no in the Manual store menu.  
Press the cursor right to enter it, when the channel frequence is  
confirmed.  
50  
2
3
4
Press the cursor up/down to adjust the channel number.  
Press the cursor right/left to confirm the channel.  
Info  
Main Controls I Install  
Manual store  
4
Finetune  
Manual store  
Prog. no  
Finetune  
Store  
Finetune  
50  
Select Finetune in the Manual store menu.  
2
Press the cursor right to enter Finetune.  
Press the cursor up/down to adjust.  
Press the cursor right/left to confirm.  
3
4
Info  
Main Controls I Install  
Manual store  
4
Store  
Manual store  
Prog. no  
Finetune  
Store  
Store ?  
Store  
50  
Select Store in the Manual store menu.  
Press the cursor right to enter Store.  
Press the cursor right to confirm stored.  
2
3
Info  
Note:  
If the channel reception is satisfatory, please go to page 12.  
11  
Main Controls  
Install  
Channel setting  
5
Channel setting  
Channel edit  
Channel swap  
Name edit  
4
2
3
Language  
Select Channel setting in the Install menu.  
Auto store  
2
Press the cursor right to enter Channel setting.  
Manual store  
Channel setting  
Factory reset  
3
Use the cursor up/down to toggle among Channel edit,  
Channel sort  
Channel swap, Name edit, or Channel sort.  
Press the cursor right to enter the selection.  
4
Info  
Channel edit  
Main Controls l Install  
Channel setting  
4
Channel edit  
Channel  
Select Channel edit in the Channel setting menu.  
Press the cursor right to enter it.  
Channel edit  
Channel swap  
Name edit  
2
Skipped  
3
Use the cursor up/down to select the channel that you want to add  
Main Controls l Install I Channel setting  
Channel edit  
Channel  
2
Skipped  
Active  
2
or remove.  
Press the cursor right/left to confirm.  
Channel sort  
4
Skipped  
Skipped  
5
Select Skipped in the Channel edit meun.  
6
Use the cursor up/down to select Active (to add) or Skipped (to  
remove) the channel you selected.  
Press the cursor right/left to confirm.  
Info  
7
Info  
Main Controls l Install  
Channel setting  
Channel swap  
4
Channel swap  
From  
Select Channel swap in the Channel setting menu.  
Press the cursor right to enter it.  
Channel edit  
Channel swap  
Name edit  
2
To  
Exchange  
3
Use the cursor up/down to select From or To and press the  
Channel sort  
Main Controls l Install I Channel setting  
cursor right to enter the selection.  
Use the cursor up/down to adjust the channel and press the  
cursor right/left to confirm.  
Channel swap  
From  
3
Exchange  
4
To  
Exchange ?  
Exchange  
5
Select Exchange in the Channel swap meun.  
Press the cursor right to activate Exchange or press the cursor left  
Info  
6
to inactivate it.  
Info  
Main Controls l Install  
Channel setting  
Name edit  
4
Name edit  
Channel  
. . . . . .  
2
Channel edit  
Channel swap  
Name edit  
Select Name edit in the Channel setting menu.  
2
Press the cursor right to enter it.  
3
Use the cursor up/down to edit name, and press the cursor right to  
Channel sort  
move to the next character.  
Press the cursor left to confirm the first character and press the  
4
cursor right to confirm the last character.  
Press the cursor right to confirm the name.  
5
Info  
Main Controls l Install  
Channel setting  
4
Channel sort  
Sort?  
Channel sort  
Channel edit  
Channel swap  
Name edit  
Select Channel sort in the Channel setting menu.  
Use the cursor right to sort the channel.  
Use the cursor left to return to the previous menu.  
2
Channel sort  
3
Info  
12  
Factory reset  
Main Controls  
Install  
5
Factory reset  
2
Select Factory reset in the Settings menu.  
Language  
No  
2
Press the cursor right to enter Factory reset.  
Auto store  
Yes  
3
Select Yes and press the cursor right for resetting the original  
factory settings.  
Manual store  
Channel setting  
Factory reset  
Info  
Note:  
If you reset the TV to the factory settings, all your present setting on  
picture, sound, and other feature settings will be erased and replaced  
by the manufacture’s default settings. However, your AutoLock access  
code will not be erased. Please refer to page 15 for detail.  
13  
TV menu-Features  
Features menu  
Main Controls  
Picture  
4
5
5
5
5
Features  
Timer  
5
4
2
2
8
Select Features in the TV Settings menu.  
Sound  
NR  
2
Press the cursor right to enter the features menu.  
Features  
Install  
Active control  
Auto lock  
Source list  
3
Select the menu items with the cursor up/down, and  
adjust the settings with the cursor left/right.  
Timer  
Select Timer in the Features menu.  
Use the cursor down to choose the item you want to adjust and  
Info  
2
press the cursor right to enter Clock, Start time, Stop time,  
and Sleep timer.  
Main Controls  
Features  
Timer  
Timer  
Clock  
Clock: Allow you to set the time.  
NR  
Start time  
Stop time  
Sleep timer  
Active control  
Start time: Allow you to set the time for turning on the  
Auto lock  
TV automatically.  
Source list  
Stop time: Allow you to set the time for turning off the  
TV automatically.  
Info  
Sleep timer: Allow you to set the time period, after  
which the TV will turn to standby mode  
automatically.  
Main Controls  
Features  
NR  
On  
Off  
This list will have values from 0 to 180.  
Timer  
NR  
NR  
Active control  
Auto lock  
Automatically filters out and reduces the image noise and improves  
picture quality when receiving weak video signals.  
Source list  
Select NR in the Features menu.  
2
Press the cursor right to enter it.  
Info  
3
4
Use the cursor down to select On or Off.  
Press the cursor right to activate or inactivate noise reduction.  
Main Controls  
Features  
Active control  
Active control  
Timer  
NR  
On  
Off  
Active control will continuously measures and corrects all incoming  
signals in sharpness, noise, contrast and color in order to provide  
the best and most consistent picture quality.  
Active control  
Auto lock  
Source list  
Select Active control in the Features menu.  
2
Press the cursor right to enter it.  
3
4
Use the cursor down to select On or Off.  
Press the cursor right to activate or inactivate Active control.  
Info  
Main Controls  
Features  
Source list  
TV  
Timer  
NR  
HDMI 1  
HDMI 2  
Source list  
Active control  
Auto lock  
Source list  
CVI 1  
CVI 2  
AV  
Select Source list in the Features menu.  
2
Press the cursor right to enter it.  
3
Use the cursor up/down to select the video input source:  
TV, HDMI 1, HDMI 2, CVI 1, CVI 2, AV, Side AV, and PC.  
Side AV  
PC  
Info  
14  
Auto lock  
The Auto lock feature allows you to lock channels, and  
prevent your children from watching unsuitable content of  
Main Controls  
Features  
5
Auto lock  
3
programmes.  
Timer  
Lock program  
Change code  
Clear all  
Auto lock offers various Blocking controls from which to  
choose:  
NR  
Active control  
Auto lock  
Source list  
Main Controls  
Features  
Access code - An Access code must be set to prevent  
children from unblocking questionable or  
5
Auto lock  
Access Code  
Timer  
censored programming set by their parents.  
NR  
Info  
Active control  
Auto lock  
Lock program - Select the TV channel you want to lock.  
Chang code - To change your access code or overwriting.  
Clear all - To unlock all locked channels and programming.  
Source list  
Info  
Select Auto lock in the feature menu.  
Press the cursor right to enter it.  
Access code will appear on the screen.  
Enter a four-digit code using the number buttons.  
2
3
4
Note:  
Remember that 0711 is the default Auto lock code. If your access code  
has been changed by someone other than you (a child, for example)  
or you have forgotten the code, you can always get in by inputting the  
default code.  
Lock program  
Main Controls I Features  
Auto lock  
After your personal access code has been set, you are ready to  
select the channels or inputs you want to block out or censor.  
3
Lock program  
18  
Lock program  
Change code  
Clear all  
Select Lock program in the Auto lock menu.  
2
Press the cursor right to enter it.  
3
Use the number buttons to enter the channel which you are going  
to block.  
4
Press the cursor up/down to block the current channel.  
Info  
Note:  
You can block additional channels by using the number buttons to  
jump to another channel.  
15  
TV menu-Picture & Sound  
Picture menu  
Main Controls  
Picture  
4
Picture  
8
Smart picture  
Contrast  
Select Picture in the TV settings menu.  
Sound  
2
3
4
Press the cursor right again to enter the Picture menu.  
Select the menu items with the cursor up/down.  
Adjust the settings with the cursor left/right, and enter the list of  
submenu items with the cursor right. Select a submenu item with  
the cursor up or down.  
Features  
Install  
Brightness  
Color  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
Smart picture  
Select Smart picture to display a list of predefined picture  
settings, each corresponding with specific factory settings.  
Personal refers to the personal preference settings of picture in  
the picture menu.  
Note: This Philips TV has been set at the factory to look best in bright  
store environments, which typically use fluorescent lighting. As your  
home will likely not be as well lit as a store, we recommend that you  
cycle through the various smart picture modes to find the one that best  
suits your own viewing conditions.  
Main Controls  
Picture  
8
Smart picture  
Personal  
Rich  
5
Smart picture  
Contrast  
100  
50  
Brightness  
Color  
Nature  
Soft  
50  
Multimedia  
Sharpness  
Color temp  
Contrast +  
Picture format  
30  
Info  
You can press the Smart picture button on the remote control  
2
repeatedly to select either Personal, Rich, Nature, Soft, or  
Multimedia picture settings.  
Note:  
Main Controls  
Picture  
• The moment you are in a predefined Smart picture setting and you modify  
the Picture menu, all values of the menu will overwrite those previously made  
in personal setting.  
8
Contrast  
Smart picture  
Contrast  
100  
Brightness  
Color  
50  
50  
30  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
Contrast  
Adjust to “sharpen” the picture quality. The black portions of the  
picture become richer in darkness and the white become brighter.  
Main Controls  
Picture  
8
Brightness  
Smart picture  
Contrast  
Brightness  
100  
50  
Adjust to brighten the dark parts of the picture. This appears to  
add white to the color.  
Brightness  
Color  
50  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
30  
16  
Main Controls  
Picture  
8
Color  
Color  
Adjust to add or reduce color.  
Smart picture  
Contrast  
100  
50  
Brightness  
Color  
50  
Sharpness  
Color temp  
30  
Contrast +  
Picture format  
Info  
Main Controls  
Picture  
8
Sharpness  
Smart picture  
Contrast  
Sharpness  
Adjust to improve detail.  
100  
50  
Brightness  
Color  
50  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
30  
Main Controls  
Picture  
8
Color temp  
Normal  
Warm  
3
Smart picture  
Contrast  
Color temp  
100  
50  
Brightness  
Color  
Cool  
Adjust to increase or decrease Warm (red) and Cool (blue)  
colors to suit personal preferences.  
Select Cool to give the white colors a blue tint, Normal to give  
the white colors a neutral tint, Warm to give the white colors  
a red tint.  
50  
Sharpness  
Color temp  
30  
Contrast +  
Picture format  
Info  
Main Controls  
Picture  
8
Contrast +  
2
Smart picture  
Contrast  
On  
Off  
100  
50  
Contrast +  
Brightness  
Color  
50  
Dynamic contrast will correct the gamma for more natural  
detail, makes the dark parts are stretched towards even more  
dark, light parts are made whiter.  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
30  
Main Controls  
Picture  
8
Picture format  
Super zoom  
4:3  
6
Smart picture  
Contrast  
Picture format  
100  
50  
Adjust to change the screen format to match the type of program  
you are watching. Please refer to page 7 for detail.  
Brightness  
Color  
Movie expand 14:9  
Movie expand 16:9  
16:9 subtitle  
50  
Sharpness  
Color temp  
Contrast +  
Picture format  
Info  
30  
Widescreen  
Note:  
Any adjustment of Brightness, Color, Contrast or Sharpness will be  
stored into Personal at Smart picture section.  
17  
Main Controls  
Picture  
4
3
3
3
Sound  
3
5
2
2
Sound menu  
Smart sound  
Incredible surround  
AVL  
Select Sound in the TV settings menu.  
Press the cursor right to enter it.  
Select the menu items with the cursor up/down.  
Press the cursor right to enter the selection.  
Sound  
Features  
Install  
2
3
4
Info  
Smart sound  
Smart sound allows you to select from four user presets and a  
personal mode that you set according to your own preferences  
through the onscreen Sound menu. The five user presets  
(Personal, Speech, Music, Movie, and Multimedia) enable you to  
tailor the TV sound so as to enhance the particular program you  
are watching.  
Main Controls  
Sound  
Smart sound  
Personal  
Speech  
Smart sound  
Incredible surround  
AVL  
Music  
Movie  
Multimedia  
Select Smart sound in the Sound menu and press the cursor right  
to enter it.  
Info  
2
You can press the Smart sound button on the remote control  
repeatedly to toggle between Personal, Speech, Music, Movie  
and Multimedia.  
Main Controls  
Sound  
Incredible surround  
Smart sound  
Incredible surround  
AVL  
On  
Off  
Incredible surround  
Adds greater depth and dimension to TV sound. Select from On  
or Off.  
Info  
Main Controls  
Sound  
AVL  
On  
Smart sound  
Incredible surround  
AVL  
Off  
AVL  
Automatically reduces the volume differences between channels  
and programs, providing a more constant overall level. This will  
also reduce the dynamics of sound.  
Info  
18  
Record with your recorder  
Record a TV program  
You can record a TV program using your recorders tuner  
without affecting your TV.  
i
+
AV  
Select the channel number on your recorder.  
Set your recorder to record.  
See the handbook for your recorder.  
Recorder  
2
Pr  
L
Pb  
R
Y
VIDEO  
Note: Switching channel numbers on your TV does not disturb  
recording !  
TV  
To select connected devices  
Press the AV button repeatedly or select Source list in the  
Settings menu to select TV, HDMI 1, HDMI 2, CVI 1, CVI 2,  
AV, Side AV, and PC according to where you connected your  
devices.  
Press the cursor up/down.  
Press OK.  
AV  
2
3
i
+
AV  
19  
PC menu-Picture & Sound  
Note:  
This TV can also be used as a PC Monitor. A PC video signal must be  
present or the TV will go into standby mode. The PC Picture controls  
allow you to adjust the picture.  
Please make sure you are in PC mode.  
Picture  
Main Controls  
Picture  
4
Picture  
5
Press the MENU button on the remote control.  
Select Picture in the Settings menu.  
Use the cursor right to enter the Picture menu.  
Color temp  
Brightness  
Contrast  
2
Sound  
3
Features  
Install  
4 Use the cursor up/down to highlight the menu items.  
5 Press the cursor right to enter the selection.  
Auto adjust  
Manual adjust  
6
Use the cursor up/down to adjust the item.  
Info  
Main Controls  
Picture  
5
Color temp  
Normal  
Warm  
3
Color temp  
Color temp  
Brightness  
Contrast  
Adjust to increase or decrease Warm (red) and Cool (blue)  
colors to suit personal preferences.  
Select Cool to give the white colors a blue tint, Normal to give  
the white colors a neutral tint, Warm to give the white colors  
a red tint.  
100  
100  
Cool  
Auto adjust  
Manual adjust  
Info  
Main Controls  
Picture  
5
Brightness  
Brightness  
Color temp  
Brightness  
Contrast  
Adjust to brighten the darkest parts of the picture.  
100  
100  
Auto adjust  
Manual adjust  
Info  
Main Controls  
Picture  
5
Contrast  
Contrast  
Color temp  
Brightness  
Contrast  
100  
100  
Adjust to “sharpen” the Picture quality. The black portions of  
the picture become richer in darkness and the white become  
brighter.  
Auto adjust  
Manual adjust  
Info  
Note:  
Color temp can also be activated by pressing Smart picture button on  
your Remote Control.  
20  
Main Controls  
Picture  
Auto adjust  
5
Auto adjust  
Yes  
Color temp  
Brightness  
Contrast  
The PC mode will automatically adjust to the best image  
position, phase, and clock setting.  
Auto adjust  
Manual adjust  
Manual adjust  
Info  
The Manual adjust control allows you to manually fine tune the  
image as it appears on the screen.  
Phase - eliminates the horizontal interfering lines.  
Main Controls  
Picture  
5
Manual adjust  
Phase  
4
Color temp  
Brightness  
Contrast  
Clock - eliminates the vertical interfering lines.  
Clock  
Horizontal  
Vertical  
Horizontal - adjust the horizontal placement of the  
Auto adjust  
Manual adjust  
picture.  
Vertical - adjust the vertical placement of the picture.  
Info  
Use the cursor up/down to adjust the item.  
Press the cursor right to confirm.  
2
Note:  
If you are willing to reset adjustment back to original value, please  
enter to Factory Reset in Install menu.  
Setting up the PC mode (Personal Computer Monitor)  
32PFL7422/37PFL7422/37HF7005/42PFL7422/47PFL7422 (32”/37”/42”/47” LCD TV)  
No  
Resolution  
640 x 480  
Mode  
V. Frequency (Hz) H. Frequency (kHz)  
1
2
VGA  
VESA  
VESA  
VESA  
CVT  
CVT  
CVT  
VESA  
59.940  
56.250  
60.317  
60.004  
59.855  
59.87  
31.469  
35.156  
37.879  
48.363  
44.772  
47.776  
47.720  
63.981  
800 x 600  
3
4
1024 x 768  
1280 x 720  
1280 x 768  
1360 x 768  
1280 x 1024  
5
6
Recommended resolution for  
32PFL7422  
Recommended resolution for  
37PFL7422/37HF7005/42PFL7422/  
47PFL7422  
*7  
*8  
59.799  
60.000  
*Recommended Resolution  
Note: Resolution 1280 x 1024 is only available for 37PFL7422/37HF7005/42PFL7422/47PFL7422  
21  
Sound menu  
Select Sound in the settings menu.  
Press the cursor right to enter it.  
Select the menu items with the cursor up/down.  
Press the cursor right to enter the selection.  
Main Controls  
Picture  
4
3
3
3
Sound  
3
5
2
2
Smart sound  
Incredible surround  
AVL  
2
3
4
Sound  
Features  
Install  
Smart sound  
Smart sound allows you to select from four user presets and a  
personal mode that you set according to your own preferences  
through the onscreen Sound menu. The five user presets  
(Personal, Speech, Music, Movie, and Multimedia) enable you to  
tailor the TV sound so as to enhance the particular program you  
are watching.  
Info  
Main Controls  
Sound  
Smart sound  
Personal  
Speech  
Smart sound  
Incredible surround  
AVL  
Music  
Select Smart sound in the Sound menu and press the cursor right  
to enter it.  
Movie  
Multimedia  
2
You can press the Smart sound button on the remote control  
repeatedly to toggle between Personal, Speech, Music, Movie  
and Multimedia.  
Info  
Main Controls  
Sound  
Incredible surround  
Smart sound  
Incredible surround  
AVL  
On  
Off  
Incredible surround  
Adds greater depth and dimension to TV sound. Select from On  
or Off.  
Info  
Main Controls  
Sound  
AVL  
On  
Smart sound  
Incredible surround  
AVL  
AVL  
Off  
Automatically reduces the volume differences between channels  
and programs, providing a more constant overall level. This will  
also reduce the dynamics of sound.  
Info  
22  
Main Controls  
Picture  
4
2
2
Features  
Picture format  
PIP  
2
2
4
Features menu  
Sound  
Select Features in the settings menu.  
Press the cursor right to enter it.  
Select the menu items with the cursor up/down.  
Press the cursor right to enter the selection.  
Features  
Install  
2
3
4
Info  
Main Controls  
Features  
Picture format  
Full screen  
4:3  
Picture format  
Picture format  
PIP  
Select Picture format in the Features menu and press the cursor  
right to enter it.  
You also can press the Picture format button on the remote  
control repeatedly to toggle between Full screen and 4:3 format.  
2
Info  
Main Controls  
Features  
PIP  
PIP  
Picture format  
PIP  
Size  
PIP (Picture-in-Picture) feature allows you to call up a subscreen  
when you are using your TV as a monitor.  
Size - turn off and set the size of PIP. You can choose your  
preferred size of small, large, or PBP (Picture Beside  
Picture).  
Input  
Position  
Sound  
Info  
Input - select video source of PIP from TV, AV, and Side  
AV.  
Position - select which corner of the position of PIP.  
Sound - select audio source of PC or PIP.  
Note:  
PIP feature only supports TV, AV, and Side AV.  
23  
Trouble ShootingTips  
Symptoms  
Items to Check and Actions to follow  
“Ghost” or double  
images  
• This may be caused by obstruction to the antenna due to high rise buildings or hills.  
Using a highly directional antenna may improve the picture.  
No power  
• Check that the TV’s AC power cord is plugged into the mains socket.  
• Unplug the television, wait for 60 seconds. Then re-insert plug into the mains socket  
and turn on the television again.  
No picture  
• Check antenna connections at the bottom of the TV to see if they are properly connected to the TV.  
• Possible broadcast station trouble. Try another channel.  
• Adjust the contrast and brightness settings. Try another auto picture setting.  
• Check if you selected the correct AV source.  
No picture and power • Your TV has a protective mode in case there is too much heat build-up. Check the  
switched on  
clearance around the vents of the device to be certain there are no blocking walls or  
cabinets which would limit the air flow.  
Picture position  
adjustment  
Most High Definition receiver boxes also have picture-positioning controls in their menu systems. If the  
TV cursor controls run out of range before the picture is correctly positioned, the receiver box controls  
will need to be adjusted.  
No photo, music or  
video play or in poor  
quality only  
• Check if the source complies with a supported code.  
No sound  
• Increase the VOLUME.  
• Check that the TV is not muted, press the MUTE button on the remote control.  
• When no signal is detected, the TV automatically switches off the sound. This is proper  
operation and does not indicate a malfunction.  
Good sound but poor • Adjust the contrast, color, tint and brightness setting. Try another auto picture setting.  
color or no picture  
Snowish picture and  
noise  
• Check the antenna connection.  
Television not  
responding to  
remote control  
• Check whether the batteries are working. Replace if necessary.  
• Clean the remote control sensor lens on the monitor.  
• Operating range between TV and the remote control should not be more than approximately twenty feet.  
• You can still use the buttons on the side of your TV.  
• Check if the remote control is in the correct mode.  
Control of accessory  
devices  
• The infrared signals of the screen may influence the reception sensibility of other peripherals Solution:  
replace the batteries of the remote control of other devices. E.g. keep away a wireless headphone from  
within a radius of approximately four feet.  
The software will not Possibly the operating system is wrong.  
install  
PC modes do not  
work  
• Check whether connections are correct.  
• Check whether the source is correctly selected. Press AV button to select the correct source.  
• Check whether you have configured the computer on a compatible display resolution.  
Standby  
Your TV consumes energy less than 2w in the standby mode.  
After improper  
shutdown  
If your TV has been shutdown in an improper way (e.g. power drop, power cord plug out), starting up the  
TV again will take a longer time than usual.  
Miscellaneous  
See Extras, Specifications on this user manual.  
24  
 
Glossary  
Aspect Ratio  
The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect  
ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie  
theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect ratio and can automatically  
switch between them.  
Audio Video (A/V)  
A term often used when discussing a channel on a TV receiver or on video equipment, which has been  
especially designed to accept VCR audio-video signals. This channel automatically activates special circuitry  
within the TV set to prevent picture distortion and skewing. It is also used for audio-video processors,  
which handle both types of signals.  
CVBS  
Composite Video Baseband Signal. In broadcast television this refers to the video signal, including the co-  
lour information and syncs.  
Component Video  
Input (Y Pb Pr)  
Component Video Input is a type of connection that uses a cinch-type connector to allow set top boxes  
or analog DVD players to connect a signal to the TV. By offering the cinch-type input (YPbPr) the primary  
colors, red, green and blue are connected from a set top box directly into the TV allowing for the signal to  
display on the screen.  
HDTV  
The generally agreed upon definition of HDTV is approximately twice the vertical and  
horizontal picture resolution of today’s NTSC TV, which essentially makes the picture twice as sharp.  
HDTV also has a screen ratio of 16:9 as compared with most of today’s TV screens, which have a screen  
ratio of 4:3. HDTV offers reduced motion artifacts (i.e. ghosting, dot crawl).  
Progressive Scan  
Resolution  
In Progressive Scanning all the horizontal scan lines are scanned on to the screen at one time. The HDTV  
Standards accept both Interlaced Scan and Progressive Scan broadcast and display methods.  
Resolution: A measurement of the finest (smallest) detail that is visible in a video image. TV Resolutions  
may be expressed as number of pixels in an image; or more commonly,  
As Total Number of (horizontally scanned) Lines used to create the image.  
Standard Digital TV Resolutions:  
SDTV: 576i - The picture is 720x576 pixels, 576p - The picture is 720x576 pixels.  
HDTV: 720p - The picture is 1280x720 pixels, 1080i - The picture is 1920x1080 pixels,  
1080p - The picture is 1920x1080 pixels.  
Note: 32PFL7422 doesn’t support to 1080p  
SPDIF  
SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound  
output.  
Note: SPDIF only supports at HDMI source.  
25  
Care And Cleaning  
WARNING concerning stationary images on the TV  
Screen: Do not leave fixed images on the screen for extended periods of time. This can cause uneven aging of the LCD  
panel. Normal use of the TV should involve viewing of programs that have constantly moving or changing images. Do  
not leave moving images on screen for extended periods of time. Do not display the same images too frequently; if you  
do, subtle “ghost” images can be left on the LCD screen. Sources of stationary images may be Laser discs, video games,  
Compact Discs Interactive (CD-i), paused Digital Video Discs (DVDs) or video tapes.  
Here are some common examples of stationary images:  
• DVD menus list DVD content.  
• Letter box black bars that appear at the top and bottom of the TV screen when a wide screen (16:9) movie is viewed  
on a TV with standard (4:3) aspect ratio. This occurs with some DVDs.  
• Video game images and scoreboards  
Television station logos cause a problem if they are bright and stationary. Moving or low-contrast graphics are  
less likely to damage the picture tube.  
• Stock market tickers may appear at the bottom of the TV screen if the TV programming covers this news.  
• Shopping channel logos, pricing displays may be bright and may appear constantly during the show.  
These usually appear in the same location on the TV screen.  
TV Location  
To avoid cabinet warping, cabinet color changes, and an increased chance of TV failure, do not place the TV  
where temperatures can become excessively hot -- for example, in direct sunlight or near a heating appliance.  
• Allow a free flow of air around the TV.  
Cleaning  
To avoid possible shock hazard, remove the TV’s power cord from the electrical outlet before cleaning.  
• Regularly dust the TV with a dry, non-scratching duster.  
• When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing jewelry or using  
anything abrasive. Do not use household cleaners. Wipe the screen with a clean cloth dampened with water.  
Use even, easy, vertical strokes when cleaning.  
• Occasionally vacuum the vents on the rear of the TV.  
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet. They may permanently blemish  
the cabinet.  
26  
 
Specification -TV  
32PFL7422  
16:9  
37PFL7422/37HF7005  
42PFL7422  
47PFL7422  
PICTURE/ DISPLAY  
Aspect ratio  
Picture Enhancement  
Progressive Scan, 3D Comb Filter, Noise Reduction,  
Smart Picture (5 modes)  
SOUND  
Output Power (RMS)  
Sound Enhancement  
Sound Mode  
2x5W  
2x10W  
Incredible Surround  
Mono, Stereo, Smart Sound (5 modes)  
Incredible Surround  
Mono, Stereo, Smart  
Sound (5 modes)  
CONVENIENCE  
Auto Store, Full text, Sleep timer, Clock  
English, Simplified Chinese  
ON SCREEN DISPLAY  
LANGUAGE  
CONNECTIVITY  
Bottom  
AC IN  
HDMI 2  
HDMI 1  
PC IN - Audio input, D-Sub  
CVI 1 - Component video (YPbPr), Audio L/R input  
CVI 2 - Component video (YPbPr), Audio L/R input  
AV - Video input, S-video, Audio L/R input, Audio L/R output, SPDIF output, Video output  
75Ω /RF  
Side  
Side AV - S-video, Audio L/R input, Video input, Earphone  
Note: Audio L/R output and Video output are only available for 37PFL7422/37HF7005/42PFL7422/  
47PFL7422  
WEIGHT &  
DIMENSIONS:  
Weight (incl. Packaging):  
Weight (excl. Packaging):  
Carton Dimension  
(WxHxD):  
21.9 kg/48.28 lbs  
18.2 kg/40.12 lbs  
33 kg/72.6 lbs  
26 kg/57.20 lbs  
35 kg/77.2 lbs  
31 kg/68.40 lbs  
43.4 kg/95.48 lbs  
35.41 kg/77.90 lbs  
1070 x 668 x 251 mm  
42.12” x 26.30” x 9.88”  
791 x 604 x 251.5 mm  
31.14” x 23.78” x 9.90”  
1124 x 740 x 332 mm  
44.25” x 29.13” x 13.07”  
924 x 676 x 280 mm  
36.38” x 26.61” x 11.02”  
1181 x 803 x 362 mm  
46.5” x 31.7” x 14.3”  
1039 x 745 x 291 mm  
40.9” x 29.4” x 11.5”  
1301 x 869 x 366 mm  
51.22” x 34.21” x 14.41”  
1149 x 805 x 287 mm  
45.23” x 31.69” x 11.30”  
Product Dimension  
(WxHxD)  
POWER  
Power Consumption  
150W  
180W  
220W  
350W  
Standby Power Consumption < 2W  
< 2W  
< 2W  
< 2W  
Mains Power  
100-240V, 60-50Hz  
100-240V, 60-50Hz  
100-240V, 60-50Hz  
100-240V, 60-50Hz  
WALL MOUNT:  
400x200mm  
Metric 6 (10mm) screws are needed for wall mounting (not included).  
27  

JVC Computer Monitor DT F9L5 User Manual
JVC VM 4200 User Manual
KitchenAid KFGU766 User Manual
KitchenAid KGCT055G User Manual
Melissa 640 123 User Manual
NEC AccuSync AS120 User Manual
Philips 1 60E+03 User Manual
Philips 14PT4137C User Manual
Philips 28GR5776 User Manual
Philips 32PW6542 User Manual