Philips 42PFL4X06H User Manual

Register your product and get support at  
47PFL4606H  
46PFL5606H  
42PFL4x06H  
42PFL3x06H  
40PFL56x6H  
37PFL4606H  
32PFL5x06H  
32PFL4606H  
32PFL3x06H  
26PDL49x6H  
22PDL49x6H  
EN User manual  
Contact information  
België/ Belgique  
0800 80 190 Gratis/Gratuit  
Latvia  
80002794 local  
Sverige  
08 5792 9100 Lokalsamtal  
ß
Lithuania  
880030483 local  
Suisse/Schweiz/Svizzera  
0800 002 050  
България  
Schweizer Festnetztarif/Tarif réseau  
fixe France  
00800 11 544 24  
Luxemburg/Luxembourg  
080026550  
Česká republika  
Suomi  
Ortsgespräch/Appel local  
800 142 840 Bezplatný hovor  
09 2311 3415 paikallispuhelu  
Magyarország  
Danmark  
Türkiye  
06 80 018 189 Ingyenes hívás  
3525 8759 Lokalt opkald  
444 7 445  
ß
Nederland  
United Kingdom  
0800 023 0076 Gratis nummer  
Deutschland  
0800 331 6015Toll Free  
0800 000 7520 (kostenfrei)  
Norge  
ß
Українська  
22 70 81 11 Lokalsamtale  
0-800-500-697  
Ελλάδα  
0 0800 3122 1280  
Κλήση χωρίς χρέωση  
Österreich  
0800 180 016  
Polska  
España  
00800 3111 318  
900 800 655Teléfono local gratuito  
solamente para clientes en España  
Portugal  
ß
0800 780 902 Chamada Grátis  
Estonia  
Россия  
8000100288 kohalik kõne tariifi  
(495) 961 1111  
8800 200 0880  
France  
(бесплатный звонок по России)  
0805 025 510 numéro sans frais  
ß
România  
0800-894910 Apel gratuit  
0318107125 Apel local  
Hrvatska  
0800 222778 free  
Србија  
Ireland  
+381 114 440 841 Lokalni poziv  
South: 1 800 7445477  
North: 0 800 331 6015  
Slovensko  
0800 004537 Bezplatný hovor  
Italia  
800 088774 NumeroVerde  
Slovenija  
600 744 5477 lokalni klic  
Қазақстан  
+7 727 250 66 17 local  
updated:20110912  
Pixel characteristics  
1 Notice  
This LCD product has a high number of  
colour pixels.Although it has effective pixels of  
99.999% or more, black dots or bright points of  
light (red, green or blue) may appear constantly  
on the screen.This is a structural property of  
the display (within common industry standards)  
and is not a malfunction.  
2011 © Koninklijke Philips Electronics N.V.All  
rights reserved.  
Specifications are subject to change without  
notice.Trademarks are the property of  
Koninklijke Philips Electronics N.V or their  
respective owners. Philips reserves the right  
to change products at any time without being  
obliged to adjust earlier supplies accordingly.  
The material in this manual is believed  
adequate for the intended use of the system.  
If the product, or its individual modules or  
procedures, are used for purposes other than  
those specified herein, confirmation of their  
validity and suitability must be obtained. Philips  
warrants that the material itself does not  
infringe any United States patents. No further  
warranty is expressed or implied.  
Compliance with EMF  
Koninklijke Philips Electronics N.V. manufactures  
and sells many products targeted at consumers  
which, like any electronic apparatus, in  
general have the ability to emit and receive  
electromagnetic signals.  
One of Philips’ leading Business Principles is to  
take all necessary health and safety measures  
for our products, to comply with all applicable  
legal requirements and to stay well within  
the Electro Magnetic Field (EMF) standards  
applicable at the time of producing the  
products.  
Philips is committed to develop, produce and  
market products that cause no adverse health  
effects. Philips confirms that if its products are  
handled properly for their intended use, they  
are safe to use according to scientific evidence  
available today.  
Philips plays an active role in the development  
of international EMF and safety standards,  
enabling Philips to anticipate further  
developments in standardisation for early  
integration in its products.  
Terms of warranty  
Risk of injury, damage toTV or void of  
warranty! Never attempt to repair theTV  
yourself.  
Use theTV and accessories only as  
intended by the manufacturer.  
The caution sign printed on the back of  
theTV indicates risk of electric shock.  
Never remove theTV cover.Always  
contact Philips Customer Support for  
service or repairs.  
Mains fuse (UK only)  
ThisTV is fitted with an approved moulded  
plug. Should it become necessary to replace  
the mains fuse, this must be replaced with a  
fuse of the same value as indicated on the plug  
(example 10A).  
1 Remove fuse cover and fuse.  
Any operation expressly prohibited in  
this manual, or any adjustments and  
assembly procedures not recommended  
or authorised in this manual shall void the  
warranty.  
2 The replacement fuse must comply with  
BS 1362 and have the ASTA approval  
mark. If the fuse is lost, contact your dealer  
in order to verify the correct type.  
3 Refit the fuse cover.  
2
EN  
 
Copyright  
Kensington and Micro Saver are registered US  
trademarks of ACCO World corporation with  
issued registrations and pending applications in  
other countries throughout the world.  
Manufactured under licence from Dolby  
Laboratories. Dolby and the double D symbol  
are trademarks of Dolby Laboratories.  
HDMI, the HDMI logo and High-Definition  
Multimedia Interface are trademarks or  
registered trademarks of HDMI licensing LLC in  
the United States and other countries.  
All other registered and unregistered  
trademarks are the property of their respective  
owners.  
EN  
3
Risk of injury or damage to theTV!  
2 Important  
Two people are required to lift and carry a  
TV that weighs more than 25 kg or 55 lbs.  
When stand mounting theTV, use only the  
supplied stand. Secure the stand to theTV  
tightly. Place theTV on a flat, level surface  
that can support the combined weight of  
theTV and the stand.  
Read and understand all instructions before you  
use yourTV. If damage is caused by failure to  
follow instructions, the warranty does not apply.  
When wall mounting theTV, use only a  
wall mount that can support the weight  
of theTV. Secure the wall mount to a wall  
that can support the combined weight of  
theTV and wall mount. Koninklijke Philips  
Electronics N.V. bears no responsibility  
for improper wall mounting that result in  
accident, injury or damage.  
Safety  
Risk of electric shock or fire!  
Never expose theTV to rain or water.  
Never place liquid containers, such as  
vases, near theTV. If liquids are spilt on or  
into theTV, disconnect theTV from the  
power outlet immediately. Contact Philips  
Consumer Care to have theTV checked  
before use.  
If you need to store theTV, disassemble  
the stand from theTV. Never lay theTV on  
its back with the stand installed.  
Never place theTV, remote control or  
batteries near naked flames or other heat  
sources, including direct sunlight.  
Before you connect theTV to the power  
outlet, ensure that the power voltage  
matches the value printed on the back  
of theTV. Never connect theTV to the  
power outlet if the voltage is different.  
Parts of this product may be made of  
glass. Handle with care to avoid injury and  
damage.  
To prevent the spread of fire, keep candles  
or other flames away from theTV, remote  
control and batteries at all times.  
Risk of injury to children!  
Follow these precautions to prevent the  
TV from toppling over and causing injury to  
children:  
Never insert objects into the ventilation  
slots or other openings on theTV.  
When theTV is swivelled ensure that no  
strain is exerted on the power cord. Strain  
on the power cord can loosen connections  
and cause arcing.  
To disconnect theTV from the mains  
power, the power plug of theTV must be  
disconnected.When disconnecting the  
power, always pull the power plug, never  
the cord. Ensure that you have full access  
to the power plug, power cord and outlet  
socket at all times.  
Never place theTV on a surface covered  
by a cloth or other material that can be  
pulled away.  
Ensure that no part of theTV hangs over  
the edge of the surface.  
Never place theTV on tall furniture (such  
as a bookcase) without anchoring both the  
furniture andTV to the wall or a suitable  
support.  
Educate children about the dangers of  
climbing on furniture to reach theTV.  
Risk of swallowing batteries!  
Risk of short circuit or fire!  
The product/remote control may contain a  
coin-type battery, which can be swallowed.  
Keep the battery out of reach of children  
at all times!  
Never expose the remote control or  
batteries to rain, water or excessive heat.  
Avoid force coming onto power plugs.  
Loose power plugs can cause arcing or fire.  
4
EN  
 
Risk of overheating!  
Temperature and humidity  
Never install theTV in a confined space.  
Always leave a space of at least 4 inches  
or 10 cm around theTV for ventilation.  
Ensure curtains or other objects never  
cover the ventilation slots on theTV.  
On rare occasions, depending on temperature  
and humidity, minor condensation can occur on  
the inside of the glass front.To prevent this, do  
not expose theTV to direct sunlight, heat or  
extreme humidity. If condensation occurs, it will  
disappear spontaneously after theTV has played  
for a few hours.The condensation moisture will  
not harm theTV or cause malfunction.  
Risk of injury, fire or power cord damage!  
Never place theTV or any objects on the  
power cord.  
Disconnect theTV from the power outlet  
and antenna before lightning storms.  
During lightning storms, never touch any  
part of theTV, power cord or antenna  
cable.  
Disposal of your old product and  
batteries  
Risk of hearing damage!  
Avoid using earphones or headphones at  
high volumes or for prolonged periods of  
time.  
Your product is designed and manufactured  
with high quality materials and components,  
which can be recycled and reused.  
Low temperatures  
If theTV is transported in temperatures  
below 5°C or 41°F, unpack theTV and  
wait until theTV temperature matches  
room temperature before connecting the  
TV to the power outlet.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the product  
is covered by the European Directive 2002/96/  
EC. Please inform yourself about the local  
separate collection system for electrical and  
electronic products.  
Please act according to your local rules and  
do not dispose of your old products with your  
normal household waste.  
Screen care  
Avoid stationary images as much as  
possible. Stationary images are images that  
remain on-screen for extended periods of  
time. Examples include: on-screen menus,  
black bars and time displays. If you must  
use stationary images, reduce screen  
contrast and brightness to avoid screen  
damage.  
Correct disposal of your old product helps to  
prevent potential negative consequences for the  
environment and human health.  
Unplug theTV before cleaning.  
Clean theTV and frame with a soft, damp  
cloth. Never use substances such as  
alcohol, chemicals or household cleaners  
on theTV.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot  
be disposed of with normal household waste.  
Please inform yourself about the local rules  
on separate collection of batteries because  
correct disposal helps to prevent negative  
consequences for the environment and human  
health.  
Risk of damage to theTV screen! Never  
touch, push, rub or strike the screen with  
any object.  
To avoid deformations and colour fading,  
wipe off water drops as soon as possible.  
EN  
5
   
Environmental efforts  
Philips continuously focuses on lowering  
the environmental impact of its innovative  
consumer products.We aim our efforts  
towards environmental improvements during  
manufacturing, reduction of harmful substances,  
energy-efficient use, end-of-life instructions and  
product recycling.  
To access energy-efficient settings:  
1 While you watchTV, press the green  
button on the remote control.  
2 Select one of the following settings:  
[Energy saving]: Picture settings that  
conserve the most energy.  
[Mute screen]: If you only want to  
listen to audio from theTV, you can  
turn off theTV display. Other functions  
continue to operate normally.  
[Light sensor]:The built-in ambient  
light sensor lowers the brightness of  
theTV screen when the surrounding  
light darkens.  
[Switch off unused sources]: If you  
connect EasyLink-compliant devices,  
you can switch them off.  
6
EN  
 
xxPFL3xx6  
3 YourTV  
1
2
3
4
Congratulations on your purchase, and  
welcome to Philips!To fully benefit from the  
support that Philips offers, register yourTV at  
TV controls  
a
b
+/-:Adjust volume.  
(Home):Access the home menu.  
DesignLineTilt  
c CH +/-: Switch channels.  
d Power: Switch theTV on or off.  
1
2
3
4
xxPFL5xx6  
1
4
3
2
xxPFL4xx6  
1
4
2
3
EN  
7
   
g
(Mute)  
Mute or restore audio.  
Remote control  
h +/- (Volume)  
Adjust volume.  
1
2
i 0-9 (Numeric buttons)  
Select channels.  
j SUBTITLE  
Enable or disable subtitles.  
17  
16  
15  
14  
k TEXT  
3
4
Enable or disable teletext.  
l
m
OPTIONS  
Access options for the current activity  
or selection.  
5
13  
12  
6
7
(Back)  
Return to the previous menu or exit  
a function.  
8
n OK  
Confirm an entry or selection.  
9
o
(Navigation buttons)  
Navigate through menus and select  
items.  
10  
11  
p
ADJUST  
Access the menu to adjust settings.  
q Colour buttons  
Select tasks or options.  
a
(Standby-On)  
Switch theTV on or to standby.  
b Play buttons  
Control video or music.  
c
FIND  
Access the menu to select aTV  
channel list.  
d
e
(Home)  
Access the home menu.  
CH - / CH + (Previous/Next)  
Switch channels or navigate through  
menu pages, tracks, albums or folders.  
f
SOURCE  
Select connected devices.  
8
EN  
 
Remote control usage  
When you use the remote control, hold it close  
to theTV and point it at the remote control  
sensor. Make sure that the line-of-sight between  
the remote control andTV is not blocked by  
furniture, walls or other objects.  
xxPFL5xx6/xxPFL4xx6  
~5m  
~30˚  
xxPFL3xx6  
~5m  
~30˚  
DesignLineTilt  
~5m  
~30˚  
EN  
9
 
DesignLineTilt  
4 Use yourTV  
This section helps you perform basicTV  
operations.  
Switch yourTV on  
Press the power switch on theTV.  
» There is a short delay before theTV  
responds.  
If theTV is in standby  
Press (Standby-On) on the remote  
control.  
xxPFL5xx6  
xxPFL5xx6/xxPFL4xx6  
Switch yourTV to standby  
Press (Standby-On) on the remote  
control again.  
» The remote control sensor on theTV  
switches to red.  
xxPFL3xx6  
10 EN  
     
xxPFL3xx6  
Switch yourTV off  
Press the power switch on theTV again.  
» The remote control sensor on theTV  
switches off.  
» For xxPFL5xx6, theTV no longer  
consumes energy.  
» For xxPFL4xx6, xxPFL3xx6, and  
DesignLineTilt, though theTV  
DesignLineTilt  
consumes very little power when  
in standby, energy continues to be  
consumed.When not in use for an  
extended period of time, disconnect  
theTV power cable from the power  
outlet or turn off the power switch.  
Note  
If you cannot locate your remote control and want to  
switch on theTV from standby, press CH+/- on theTV.  
Other ways to switch channels  
Enter a channel number using the Numeric  
buttons.  
Press  
(BACK) on the remote control  
Switch channels  
to return to the previous channel.  
Press CH+ or CH- on the remote control.  
Note  
channels in the list (see ‘Create and use lists of favourite  
channels’ on page 19).  
View channel preview  
You can view a preview of all available channels  
with the channel grid.  
Press CH +/- on theTV.  
Press FIND.  
xxPFL5xx6/xxPFL4xx6  
» The channel grid appears.  
» To preview a channel, select it.  
» To watch a channel, select it, then press  
OK.  
EN 11  
     
Watch connected devices  
AdjustTV volume  
Press +/- on the remote control.  
Note  
Before you select a device as a source, switch the  
device on.  
Select a device from the source list  
1 Press  
SOURCE.  
Press  
+/- on theTV.  
xxPFL5xx6/xxPFL4xx6  
» The source list appears.  
2 Press  
to select a device.  
3 Press OK to confirm your choice.  
» TheTV switches to the selected  
device.  
xxPFL3xx6  
DesignLineTilt  
To mute or unmute sound  
Press to mute the sound.  
Press again to restore the sound.  
12 EN  
     
Use teletext  
1 Press TEXT.  
» The main index page appears.  
2 Select a page with one of the following:  
Press the Numeric buttons to enter a  
page number.  
Press or to view the next or  
previous page.  
Press the Colour buttons to select a  
colour coded item.  
Press  
(BACK) to return to a  
previously viewed page.  
3 Press TEXT to exit teletext.  
Note  
For UK users only: Some digitalTV channels offer  
dedicated digital text services (for example, BBC1).  
EN 13  
 
5 Use more of  
yourTV  
Add device to the home  
menu  
After you connect a device, add it to the home  
menu.  
AccessTV menus  
1 Press  
.
2 Select [Add new device].  
Menus help you to install channels, change  
picture and sound settings and access other  
features.  
3 Follow the onscreen instructions to add  
the device to the home menu.  
» The device is displayed in the home  
menu.  
1 Press  
.
The menu screen appears.  
4 To watch the device, switch it on, then  
select it in the home menu.  
source button (see ‘Select a device from  
the source list’ on page 12).  
Rename devices from the  
home menu  
2 Select one of the following, then press OK.  
After you add a new device to the home menu,  
you can rename it to your preference.  
[WatchTV]: If a source other than  
antenna is selected, switch back to the  
antenna source  
Note  
[Programme guide]:Access the  
electronic programme guide.  
[Browse USB]: If a USB device  
is connected, access the content  
browser.  
The device name can be up to 16 characters long.  
1 Press  
2 Select a device to rename.  
OPTIONS.  
.
[Scenea]: Switch on Scenea wallpaper.  
[Add new device]:Add new devices  
to the home menu.  
3 Press  
» The options menu appears.  
[Setup]:Access menus to change  
picture, sound and other settings.  
[Help]:Access theTV tour.  
4 Select [Rename device], then press OK.  
5 To display the text input box, press OK.  
3 Press to exit.  
6 For each character, select a character, then  
press OK.  
To select uppercase letters, lowercase  
letters or symbols: In the row below  
the space key, select the respective  
key, then press OK.  
14 EN  
       
7 When complete, select [Done], then press  
Use settings assistant  
OK.  
Use the settings assistant to guide you through  
the picture and sound settings.  
» The text input box closes.  
8 In the rename device menu, select [Done],  
1 Press  
.
then press OK.  
2 Select [Setup] > [Quick picture and  
sound settings], then press OK.  
3 Select [Continue], then press OK.  
Remove devices from the  
home menu  
» The [Settings assistant] menu appears.  
4 Follow the onscreen instructions to choose  
your preferred picture settings.  
If a device is no longer connected to theTV,  
remove it from the home menu.  
1 Press  
2 Select a device to remove.  
OPTIONS.  
.
Use smart picture  
Use smart picture to apply pre-defined picture  
settings.  
3 Press  
4 Select [Remove device], then press OK.  
1 Press ADJUST.  
5 Select [Remove], then press OK.  
» The selected device is removed from  
the home menu.  
2 Select [Smart picture], then press OK.  
3 Select one of the following settings, then  
press OK.  
[Personal]:Apply your customised  
picture settings  
[Vivid]: Rich and dynamic settings,  
ideal for daytime.  
Change picture and sound  
settings  
[Natural]: Natural picture settings.  
[Cinema]: Ideal settings for movies.  
[Game]: Ideal settings for games.  
[Energy saving]: Settings that conserve  
the most energy.  
Change picture and sound settings to suit your  
preferences.You can apply pre-defined settings  
or change settings manually.  
[Standard]: Default settings that suit  
most environments and types of  
video.  
Note  
While you watchTV or external devices, press  
ADJUST, then select [Smart picture] or [Smart  
sound] for quick access to picture and sound settings.  
[Photo]: Ideal settings for photos.  
[Custom]: Customise and store  
your personal picture settings. Select  
[Personal] to apply these settings.  
EN 15  
       
[Colour enhancement]: Make colours  
more vivid and improve the details  
in bright colours.You can switch this  
feature on or off.  
[Gamma]: For selected models.Adjust  
the midtone intensity in the picture.  
Black and white are not affected.  
Manually adjust picture settings  
1 Press  
.
2 Select [Setup] > [TV settings] > [Picture],  
then press OK.  
3 Select one of the following settings, then  
press OK.  
[PC mode]:Adjust the picture when a PC  
is connected to theTV via HDMI or DVI.  
[Light sensor]:Adjust settings dynamically  
based on the current lighting conditions.  
[Picture format]: Change the picture  
format.  
[Screen edges]:Adjust the viewing area.  
(when set to maximum, you may see noise  
or the rough edge of an image).  
[Smart picture]:Access predefined smart  
picture settings.  
[Reset]: Reset to factory default settings.  
[Contrast]:Adjust the intensity of backlight  
areas, while the video contents are kept  
unchanged.  
[Brightness]:Adjust the intensity and  
details of dark areas.  
[Colour]:Adjust colour saturation.  
[Hue]: Compensate for colour variations.  
[Sharpness]:Adjust sharpness in the image.  
[Noise reduction]: Filter and reduce noise  
in an image.  
[Picture shift]: If available, adjust the picture  
position for all picture formats except for  
[Auto zoom] and [Wide screen].  
Change picture format  
[Tint]:Adjust the colour balance in an  
image.  
[Custom tint]: Customise tint setting.  
(Only available if [Tint] > [Custom] is  
selected)  
[Digital Crystal Clear] / [Pixel Plus] /  
[Pixel Plus HD]: Fine-tune each pixel to  
match surrounding pixels.This setting  
produces a brilliant, high-definition image.  
1 Press ADJUST.  
2 Select [Picture format], then press OK.  
3 Select a picture format, then press OK.  
Summary of picture formats  
The following picture settings can be configured.  
[HD Natural Motion]: For selected  
models. Minimise juddering effects and  
enhance picture smoothness.  
[100Hz Clear LCD] / [120Hz Clear  
LCD]: For selected models. Reduce  
motion blurring and make picture  
clearer.  
Note  
Depending on the format of the picture source, some  
picture settings are not available.  
[Auto format]: For  
selected models. (Not for  
PC mode.) Automatically  
display the suitable picture  
format. If not, widescreen is  
applied.  
[Advance sharpness]: Enable superior  
picture sharpness.  
[Dynamic contrast]: Enhance contrast.  
[Medium] setting is recommended.  
[Dynamic backlight]:Adjust brightness  
of theTV backlight to match lighting  
conditions.  
[MPEG artifact reduction]: Smooth  
out transitions on digital pictures.You  
can switch this feature on or off.  
[Auto fill]: For selected  
models.Adjust the  
picture to fill the screen  
(subtitles remain visible).  
Recommended for minimal  
screen distortion but not  
for HD or PC.  
16 EN  
   
[News]: Ideal settings for spoken  
audio, such as news.  
[Cinema]: Ideal settings for movies.  
[Game]: Ideal settings for games.  
[DRAMA]: Ideal settings for drama  
programmes.  
[Auto zoom]: For selected  
models. Enlarge the  
picture to fill the screen.  
Recommended for minimal  
screen distortion but not  
for HD or PC.  
[Sports]: Ideal settings for sports  
programmes.  
[Super zoom]: (Not  
for HD and PC mode.)  
Remove the black bars on  
the side of 4:3 broadcasts.  
There is minimal distortion.  
[4:3]: Show the classic 4:3  
format.  
Manually adjust sound settings  
1 Press  
.
2 Select [Setup] > [TV settings] > [Sound],  
then press OK.  
» The [Sound] menu appears.  
[Movie expand 16:9]: (Not  
for HD and PC mode.)  
Scale 4:3 format to 16:9.  
3 Select one of the following settings, then  
press OK.  
[Smart sound]:Access predefined smart  
sound settings.  
[Wide screen]: Scale 4:3  
format to 16:9.  
[Reset]: Reset to factory default settings.  
[Clear sound]: Enhance the sound clarity.  
[Bass]:Adjust the bass level.  
[Treble]:Adjust the treble level.  
[Surround]: Switch on spatial sound.  
[Incredible Surround]: (For selected  
models) Enhanced spatial sound for  
increased surround effect.  
[Headphone volume]: (For models with  
headphones) Adjust headphone volume.  
[Auto volume levelling]:Automatically  
reduce sudden volume changes, for  
example when switching channels.  
[Balance]:Adjust the balance of the right  
and left speakers.  
[Digital output format]: Select the type of  
digital audio output through digital audio  
output connector.  
[Unscaled]: For HD and  
PC mode only, and in  
selected models only.Allow  
maximum sharpness. Some  
distortion may be present  
due to the broadcaster’s  
systems. Set your PC  
resolution to wide screen  
mode for best results.  
Use smart sound  
Use smart sound to apply pre-defined sound  
settings.  
1 Press ADJUST.  
[PCM]: Convert non-PCM audio type  
to PCM format.  
[Multichannel]: Output audio to the  
home theatre.  
2 Select [Smart sound], then press OK.  
3 Select one of the following settings, then  
press OK.  
[Personal]:Apply the settings that  
were customised in the sound menu.  
[Standard]: Settings that suit most  
environments and types of audio.  
EN 17  
   
Use the universal access  
menu  
Use advanced teletext  
features  
You can activate the universal access menu  
during the first installation. Once enabled, you  
can quickly access the visually impaired and  
hearing impaired menus when watchingTV or  
external devices.  
Access the teletext options menu  
Access the teletext features through the  
teletext options menu.  
1 Press TEXT.  
» The teletext screen appears.  
1 While you watchTV, press  
OPTIONS.  
» TheTV options menu appears.  
2 Press  
OPTIONS.  
» The teletext options menu appears.  
2 Select [Universal access], then press OK.  
3 Select one of the following options, then  
3 Select one of the following options, then  
press OK.  
press OK.  
[Freeze page] / [Unfreeze page]:  
Freeze/unfreeze the current page.  
[Dual screen] / [Full screen]: Switch  
between full screen and dual screen  
teletext.  
[T.O.P. overview]: Switch onTable of  
Pages teletext broadcasts  
[Enlarge] / [Normal view]: Switch  
between enlarged and normal view of  
teletext pages.  
[Reveal]: Hide or reveal hidden  
information on a page, such as  
solutions to riddles or puzzles.  
[Cycle subpage]: If subpages are  
available, automatically display each  
subpage in sequence.  
[Hearing impaired]: Enable or disable  
hearing impaired subtitles.  
[Visually impaired]: Some digitalTV  
channels broadcast special audio adapted  
for people who are visually impaired.  
The normal audio is mixed with extra  
commentary. Use the colour buttons to  
select the options:  
Red ([Off]):Turn off visually impaired  
audio.  
Green ([Speakers]): Hear visually  
impaired audio from speakers only  
Yellow ([Headphone]): Hear visually  
impaired audio from headphones only.  
Blue ([Speaker + headphone]): Hear  
visually impaired audio from both  
speakers and headphone.  
[Languages]: Select a language for  
teletext.  
[Mixed volume]:Adjust the volume of  
visually impaired audio.  
[Key beep]: Switch on audio feedback  
when buttons are pressed on the remote  
control orTV.  
Select teletext subpages  
A teletext page can contain several subpages.  
Subpages are displayed next to the main page  
number.  
Tip  
1 Press TEXT.  
Press the colour buttons on the remote control to  
enter the options.  
» The teletext screen appears.  
2 Press or to select a teletext page.  
3 Press or to enter a subpage.  
18 EN  
       
3 Select [Select list] > [Favourites], then  
press OK.  
SelectT.O.P. teletext broadcasts  
Jump from one subject to another without  
entering page numbers withTable Of Pages  
(T.O.P.) teletext broadcasts.T.O.P. teletext  
broadcasts are available on selectedTV  
channels.  
» Only channels in the favourites list  
appear in the channel grid.  
Note  
1 Press TEXT.  
The favourites channel grid is empty until you add  
channels into the favourites list.  
» The teletext screen appears.  
2 Press  
OPTIONS.  
3 Select [T.O.P. overview], then press OK.  
» TheT.O.P. overview appears.  
View all channels  
4 Select a subject.  
You can exit the favourites list, and view all  
installed channels.  
5 Press OK to view the page.  
1 While you watchTV, press FIND.  
» The channel matrix menu is displayed.  
UseTeletext 2.5  
2 Press  
OPTIONS.  
Teletext 2.5 offers more colours and better  
graphics than normal teletext. IfTeletext 2.5  
is broadcast by a channel, it is switched on by  
default.  
3 Select [Select list] > [All], then press OK.  
» All channels are displayed in the  
channel grid.  
1 Press  
.
Note  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Teletext 2.5].  
All favourite channels are marked by an asterisk when  
you view the channel grid.  
3 Select [On] or [Off], then press OK to  
confirm.  
Manage the favourites list  
Create and use lists of  
favourite channels  
1 While you watchTV, press FIND.  
» The channel matrix menu appears.  
You can create a list of your preferredTV  
channels so that you can find those channels  
easily.  
2 Press  
3 Select [Select list] > [All], then press OK.  
OPTIONS.  
OPTIONS.  
4 Press  
5 Select [Mark as favourite] or [Unmark as  
View only the list of favourite  
channels  
favourite], then press OK.  
» The channel is added or removed from  
the favourite list.  
1 While you watchTV, press FIND.  
» The channel matrix menu is displayed.  
Note  
2 Press  
OPTIONS.  
All favourite channels are marked by an asterisk in the  
channel grid.  
EN 19  
       
[Scheduled reminders]: List  
programme reminders. Only available  
for upcoming programmes.  
[Acquire EPG data]: Update the latest  
programme guide information.  
Use the Electronic  
Programme Guide  
The programme guide is an on-screen guide  
available for digital channels. It allows you to:  
View a list of digital programmes being  
broadcast  
Display theTV clock  
View upcoming programmes  
Group programmes by genre  
Set reminders when programmes start  
Setup preferred programme guide  
channels  
You can display a clock on theTV screen.The  
clock displays the current time using time data  
received from yourTV service operator.  
Set theTV clock manually  
Switch on EPG  
In some countries, you need to setTV clock  
manually.  
1 Press  
.
1 Press  
.
2 Select [Programme guide], then pressOK.  
» The programme guide appears  
displaying information about the  
scheduled programmes.  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Clock].  
3 Select [Auto clock], then press OK.  
4 Select [Manual], then press OK.  
Note  
5 Select [Time] or [Date], then press OK.  
Programme guide data is available only in selected  
countries and can take some time to load.  
6 Press the Navigation buttons to set the  
time or date.  
7 Select [Done], then press OK.  
Change programme guide options  
8 Press to exit.  
You can set or clear reminders, change the  
day, and access other useful options in the  
programme guide options menu.  
Note  
If your selected country supports digital broadcast,  
the clock displays the time data from yourTV service  
operator as priority.  
1 Press  
2 Select [Programme guide], then press OK.  
OPTIONS.  
.
3 Press  
Display theTV clock  
» The programme guide menu appears.  
1 While you watchTV, press  
OPTIONS.  
» The options menu is displayed.  
4 Select one of the following options, then  
press OK.  
[Set reminder] / [Clear reminders]:  
Set or clear programme reminders.  
[Change day]: Set the programme  
guide day.  
[More info]: Display programme  
information.  
2 Select [Clock].  
» The clock is displayed.  
3 Press OK.  
Note  
[Search by genre]: SearchTV  
programmes by genre.  
To disable the clock, repeat the procedure.  
20 EN  
   
Change the clock mode  
Use timers  
1 Press  
.
You can set timers to switch theTV to standby  
at a specified time.  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Clock] > [Auto clock].  
3 Select [Automatic] or [Manual], then press  
Tip  
OK.  
Set theTV clock before you use timers.  
Change the time zone  
Note  
Automatically switch theTV to  
standby (sleep timer)  
This option is only available if you select [Auto clock] >  
[Automatic] (in countries with clock transmission data).  
Sleep timer switches theTV to standby after a  
pre-defined duration.  
1 Press  
.
2 Select [Setup] > [TV settings] >  
Tip  
[Preferences] > [Clock] > [Time zone].  
You can switch off yourTV earlier or reset the sleep  
timer during the countdown.  
3 Select your time zone.  
4 Press OK to confirm.  
1 Press  
.
Use daylight saving  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Sleep timer].  
» The [Sleep timer] menu appears.  
Note  
This option is only available if you select [Auto clock  
mode] > [Manual].  
3 Select a value between zero and 180  
minutes.  
» If you select zero, the sleep timer  
switches off.  
1 Press  
.
2 Select [Setup] > [TV settings] >  
[Preferences] > [Clock] > [Daylight  
saving], then press OK.  
4 Press OK to switch on the sleep timer.  
» TheTV switches to standby after the  
specified time.  
3 Select [Standard time] or [Daylight saving  
time], then press OK.  
EN 21  
   
6 To activate the locks, switch theTV on and  
Lock unsuitable content  
off.  
» When you switch channels with  
CH - or CH +, the locked channels are  
skipped.  
You can prevent your children from watching  
certain programmes or channels by locking the  
TV controls.  
» When you access the locked channels  
from the channel grid, you are  
Set or change code  
prompted to enter your PIN code.  
1 Press  
.
2 Select [Setup] > [Channel settings] >  
Set parental ratings  
[Child lock].  
Some digital broadcasters rate their  
3 Select [Set code] or [Change code].  
» The [Set code] / [Change code] menu  
appears.  
programmes according to age.You can set your  
TV to display only programmes with age ratings  
lower than your child’s age.  
4 Enter your code using the Numeric  
buttons.  
1 Press  
.
2 Select [Setup] > [Channel settings] >  
» Follow the on-screen instructions to  
create or change your PIN code.  
[Child lock] > [Parental rating].  
» A code setup screen appears.  
3 Enter your code using Numeric buttons.  
Tip  
» The rating menu appears.  
If you forget your code, enter ‘8888’ to override any  
existing codes.  
4 Select an age rating, then press OK.  
5 Press to exit.  
Lock or unlock one or more channels  
View Scenea  
1 Press  
.
You can display a default picture as the  
wallpaper on yourTV.You can also load another  
picture as the wallpaper.  
If the sleeptimer is off, the wallpaper is displayed  
for 240 minutes. Otherwise, it is displayed for  
the duration of the sleeptimer.  
2 Select [Setup] > [Channel settings] >  
[Child lock] > [Channel lock].  
» A list of channels is displayed.  
3 Select the channel that you want to lock or  
unlock, then press OK.  
» The first time you lock or unlock a  
channel, you are prompted to enter  
your PIN code.  
Switch on Scenea  
1 Press  
.
4 Enter your code and press OK.  
» If the channel is locked, a lock icon is  
displayed.  
2 Select [Scenea], then press OK.  
» If no picture has been set, the default  
picture is displayed.  
5 Repeat the process to lock or unlock more  
‘Customise the Scenea picture’ on  
channels.  
22 EN  
           
Customise the Scenea picture  
Change audio language  
You can load another picture as the wallpaper.  
You can choose an audio language if it is  
available from your broadcaster. For digital  
channels, multiple languages may be available.  
For analogue channels, two languages may be  
available.  
Note  
When you load a new Scenea picture, it overrides the  
current Scenea picture.  
To use another picture as the wallpaper, you need a  
USB storage device that contains a picture that is less  
than 1 MB in size.  
1 While you watchTV, press  
OPTIONS.  
2 For digital channels, select [Audio  
language], select the language, then press  
OK.  
1 Load a picture smaller than 1MB in size  
3 For analogue channels, select [Dual I-II],  
into a USB storage device.  
select either language, then press OK.  
2 Connect the USB storage device to theTV.  
3 Press  
.
Show or hide subtitles  
4 Select [Browse USB], then press OK.  
1 While you watchTV, press SUBTITLE.  
5 Select a picture, then press  
OPTIONS.  
2 Select one of the following, then press OK.  
6 Select [Set as Scenea], then press OK.  
7 Press any button to exit Scenea.  
[Subtitles on]:Always display subtitles.  
[Subtitles off]: Never display subtitles.  
[On during mute]:When audio is  
muted, display subtitles.  
Change language  
Note  
Depending on your broadcaster, you can change  
the audio language, subtitle language, or both,  
for aTV channel.  
Repeat this procedure to enable subtitles on each  
analogue channel.  
Select [Subtitles] > [Subtitles off] to disable subtitles.  
Multiple audio languages, subtitles, or both, are  
broadcast through teletext or DVB-T digital  
broadcasts. Dual sound broadcasts:With digital  
broadcasts, you can select a subtitle language.  
Select a subtitle language in digital  
channels  
Change menu language  
Note  
1 Press  
.
When you select a subtitle language in a digitalTV  
channel as described below, the preferred subtitle  
language set in the installation menu is temporarily  
overruled.  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Menu language], then  
press OK.  
3 Select a language, then press OK.  
1 While you watchTV, press  
OPTIONS.  
2 Select [Subtitle language], then press OK.  
3 Select a subtitle language.  
4 Press OK to confirm.  
EN 23  
           
Change slide show settings  
Play photos, music and videos  
on USB storage devices  
1 While you view a slide show, press  
OPTIONS.  
» The slide show options menu is  
displayed.  
Caution  
Philips is not responsible if the USB storage device is  
not supported, nor is it responsible for damage or loss  
of data from the device.  
2 Select one of the following, then press OK.  
[Start/Stop slideshow]: Start or stop  
slideshow.  
[Slideshow transitions]: Set the  
transition from one picture to the  
next.  
Connect a USB storage device to play photos,  
music or videos stored on it.  
1 Switch on theTV.  
[Slideshow frequency]: Select the  
display time for each photo.  
[Repeat] / [Play once]:View the  
pictures in the folder once only, or  
repeatedly.  
[Shuffle off] / [Shuffle on]:View the  
pictures in sequential order, or at  
random.  
2 Connect the USB device to the USB port  
on the side of yourTV.  
3 Press  
.
4 Select [Browse USB], then press OK.  
» The USB browser appears.  
[Rotate image]: Rotate photo.  
[Show info]: Display the picture name,  
date, size and next picture in the slide  
show.  
View photos  
1 In the USB browser, select [Picture], then  
press OK.  
[Set as Scenea]: Set the selected  
Scenea’ on page 22).  
2 Select a photo or a photo album, then  
press OK to view the photo enlarged to  
fill theTV screen.  
To view the next or previous photo,  
press  
3 To return, press  
3 To return, press  
.
.
Note  
.
[Rotate image] and [Show info] appear only when the  
slideshow is paused.  
View a slide show of your photos  
1 When a full screen image of a photo is  
Listen to music  
displayed, press OK.  
1 In the USB browser, select [Music], then  
» A slide show begins from the selected  
photo.  
press OK.  
2 Select a music track or album, then press  
Press the following buttons to control play:  
OK to play.  
to play.  
to pause.  
or to play the previous or next  
3 To control play, press the play buttons:  
to play.  
to pause.  
or to play the previous or next  
photo.  
to stop.  
track.  
or  
backward.  
to stop.  
To return, press  
.
to search forward or  
24 EN  
 
Change music settings  
View a slideshow with music  
While you play music, press  
to access one of the following settings,  
OPTIONS  
You can view a picture slide show with  
background music.  
then press OK.  
1 Select an album of songs.  
[Stop playback]: Stop music play.  
[Repeat]: Play a song once or  
repeatedly.  
2 Press OK.  
3 Press  
to return to the USB content  
browser.  
[Shuffle on] / [Shuffle off]: Play songs  
in sequence or at random.  
[Show info]: Display the file name.  
4 Select an album of pictures.  
5 Press OK.  
» The slideshow begins.  
Watch video  
6 To exit, press  
.
1 In the USB browser, select [Video], then  
press OK.  
Disconnect a USB storage device  
2 Press OK to play.  
Caution  
3 To control play, press the play buttons:  
to play.  
to pause.  
or to play the previous or next  
Follow this procedure to avoid damage to your USB  
storage device.  
video.  
or  
backward.  
to stop.  
1 Press  
to exit the USB browser.  
to search forward or  
2 Wait for five seconds, then disconnect the  
USB storage device.  
Change video settings  
Listen to digital radio  
channels  
While you play video, press  
OPTIONS  
to access one of the following settings,  
then press OK.  
1 Press FIND.  
[Stop playback]: Stop video play.  
[Repeat]: Play once or repeatedly.  
[Full screen] / [Small Screen]:View  
the video stretched to fill the screen,  
or view it in its native picture format.  
[Shuffle on] / [Shuffle off]: Play in  
sequence or at random.  
» The channel matrix menu is displayed.  
2 Press  
OPTIONS, then select [Select  
list] > [Radio].  
» The radio channel grid appears.  
3 Select a radio channel and press OK to  
listen.  
[Show info]: Display the file name.  
EN 25  
 
Step 2: Download and update the  
latest software version  
Update theTV software  
Philips continuously tries to improve its  
1 Connect a USB storage device.  
products and we recommend that you update  
theTV software when updates are available.  
2 Press  
.
3 Select [Setup] > [Update software].  
Ways to update theTV software  
4 Follow the instructions to load a file onto  
your USB storage device.  
You can update theTV software in one of the  
following ways:  
A: with a USB storage device,  
B: when prompted through digital broadcasts, or  
C: after being prompted through digital  
broadcasts.  
5 Connect the USB storage device to your  
computer, then double-click the file.  
» A Web page is launched.  
6 Follow the instructions in the Web page.  
If the current software version  
matches the latest software update  
file, you do not need to update your  
TV software.  
A: Update with a USB device  
To update with a USB storage device, you need:  
If the current software version is  
smaller than the latest software  
update file, download the latest  
software update file to the root  
directory of your USB device.  
An empty USB flash drive.The USB flash  
drive must be FAT or DOS-formatted. Do  
not use a USB hard drive.  
A computer with Internet access  
An archive utility that supports the ZIP  
file format (for example,WinZip® for  
Microsoft® Windows® or Stufflt® for  
Macintosh®).  
7 Disconnect the USB storage device from  
the computer.  
Step 3: Update theTV software  
1 Connect your USB storage device to the  
Step 1: Check the current software  
version  
TV.  
» TheTV detects the USB flash drive and  
starts to scan for software version.  
1 Press  
.
2 Select [Setup] > [Software settings] >  
2 If a message prompts you to update the  
software, follow the on-screen instructions  
to update theTV software.  
[Current software inf].  
» The current software information is  
displayed.  
3 If the message is not displayed, continue  
3 Write down the software version number.  
with the following steps:  
4 To return, press OK.  
4 Press  
.
5 To exit, press  
.
5 Select [Setup] > [Software settings] >  
[Local updates].  
6 Select the file that you downloaded, then  
press OK to update theTV software  
manually.  
7 Follow the on-screen instructions to  
complete the update.  
8 To exit, press  
.
26 EN  
   
B: Update when prompted through  
digital broadcasts  
ChangeTV preferences  
Use the preferences menu to customise your  
If you receive digital broadcasts (DVB-T), your  
TV can automatically receive software updates.  
When yourTV receives a software update, it  
will prompt you to update theTV software.  
TV settings.  
1 Press  
.
2 Select [Setup] > [TV settings] >  
[Preferences].  
1 Press  
.
3 Select one of the following, then press OK.  
2 Select [Setup] > [Software settings] >  
[Menu language]: Select a menu  
language.  
[Announcement] .  
3 If a message appears to prompt you  
to update your software, follow the  
instructions to start the update.  
» TheTV restarts after the software  
update is complete.  
[Sleep timer]: Switch theTV to  
standby after a pre-defined duration.  
[Location]: OptimiseTV settings for  
your location - home or shop.  
[E-sticker]: (For shop mode only)  
Switch the e-sticker on or off.  
[Volume bar]: Display the volume bar  
when you change the volume.  
[Auto switch off]:To conserve energy,  
set theTV to switch to standby  
automatically after a period of  
inactivity.  
4 If you do not want to update the software,  
select [Setup] > [Software settings] >  
[Clear announcement], then press OK.  
Note  
(see ‘C: Check for updates through digital broadcasts’  
ThisTV is also designed with other  
energy efficiency settings. If there is  
no user interaction (such as pressing  
a remote control button or a control  
on the front panel) for four hours,  
theTV will automatically switch to  
standby.  
C: Check for updates through digital  
broadcasts  
[Channel information size]: Change  
the type of information that is  
displayed when you switch channels.  
[Universal access]: Enable or disable  
the universal access menu.  
[Key beep]: Enable audio feedback  
when you press buttons on the  
remote control orTV.  
[Audio out delay]:Automatically sync  
the image on yourTV to the audio  
from a connected home theatre.  
[TV position]:Apply the best settings  
for yourTV based on how it is  
mounted.  
You can check if there are updates available  
through digital broadcasts.  
1 Press  
.
2 Select [Setup] > [Software settings] >  
[Check on major updates].  
3 If an update is available, follow the on-  
screen instructions to start the update.  
» TheTV restarts after the software  
update is complete.  
[Teletext 2.5]: Enable or disable  
Teletext 2.5. (For digitalTV)  
[Clock]: Display or remove the time  
from theTV, and set clock options.  
EN 27  
   
Start aTV demo  
You can use demonstrations to better  
understand the features of yourTV. Some  
demos are not available on certain models.  
Available demos are displayed in the menu list.  
1 While you watchTV, press  
.
2 Select [Setup] > [Watch demo], OK.  
3 Select a demo and press OK to view it.  
4 To exit, press  
.
Reset theTV to factory  
settings  
You can restore the default picture and sound  
settings of yourTV.The channel installation  
settings remain the same.  
1 Press  
.
2 Select [Setup] > [TV settings] > [Factory  
settings], then press OK.  
the child-lock code (see ‘Set or change  
» A confirmation message is displayed.  
4 Press OK to confirm.  
28 EN  
   
1 Press  
.
6 Install channels  
2 Select [Setup] > [Search for channels],  
then press OK.  
The first time you set up yourTV, you are  
prompted to select a menu language and to  
installTV and digital radio channels (if available).  
Afterwards, you can re-install and fine tune  
channels.  
3 Select [Reinstall channels], then press OK.  
» The country menu is displayed.  
4 Select your country, then press OK.  
» The network menu is displayed.  
5 Select the network, then press OK.  
[Antenna]: For free-to-air antenna or  
digital DVB-T channels.  
Automatically install channels  
[Cable]: For cable or digital DVB-C  
channels.  
You can search and store channels automatically.  
6 Follow the onscreen instructions to select  
other options, if any.  
» The start menu for channel search is  
displayed.  
Note  
prompted to set the code (see ‘Set or change code’ on  
7 Select [Start], then press OK.  
» All available channels are stored.  
8 To exit, press OK.  
Step 1: Select your menu language  
Update the channel list  
1 Press  
.
You can enable automatic update of channels  
when yourTV is in standby mode.The channels  
stored in yourTV are updated every morning  
according to the channel information in the  
broadcast.  
2 Select [Setup] > [TV settings] >  
[Preferences] > [Menu language], then  
press OK.  
3 Select a language, then press OK.  
1 Press  
.
Step 2: Search for channels  
2 Select [Setup] > [Channel settings] >  
[Channel installation] > [Automatic  
channel update].  
When theTV was switched on for the  
first time, a full installation of channels was  
performed.You can run this full installation again  
to set your language, country, and install all  
availableTV channels.  
3 Select [On] to enable the automatic  
update or select [Off] to disable it.  
4 To return, press  
.
Note  
For selected models, some options are different.  
EN 29  
     
Step 3: Fine-tune channels  
Manually install analogue  
channels  
1 Press  
.
2 Select [Setup] > [Channel settings]  
> [Channel installation] > [Analogue:  
Manual antenna installation] > [Fine-tune],  
then press OK.  
You can search and store analogueTV channels  
one at a time.  
Note  
3 Press  
to fine-tune the channel.  
prompted to set the code (see ‘Set or change code’ on  
Manually install digital  
channels  
Step 1: Select your system  
You can search and store digitalTV channels  
one at a time.  
Note  
If your system settings are correct, skip this step.  
Note  
prompted to set the code (see ‘Set or change code’ on  
1 Press  
.
2 Select [Setup] > [Channel settings]  
> [Channel installation] > [Analogue:  
Manual antenna installation] > [System],  
then press OK.  
1 Press  
.
2 Select [Setup] > [Channel settings]  
> [Channel installation] > [Digital:  
Reception test] > [Find channel], then  
press OK.  
3 Select the correct system for your country  
or region, then press OK.  
Step 2: Search and store channels  
3 Press the Numeric buttons to enter the  
channel frequency.  
1 Press  
.
4 Select [Search], then press OK.  
2 Select [Setup] > [Channel settings]  
> [Channel installation] > [Analogue:  
Manual antenna installation] > [Find  
channel], then press OK.  
5 When the correct channel is located, select  
[Store], then press OK.  
6 To exit, press  
.
If you know the three-digit frequency  
of the channel, enter it.  
Note  
To search, select [Search], then press  
OK.  
If the reception is poor, reposition your antenna and  
repeat the procedure.  
If you receive the channel with DVB-C, select [Symbol  
rate mode] > [Automatic], unless your cable provider  
supplies you with a specific symbol rate value.  
3 When the channel is found, select [Done],  
then press OK.  
To store the channel as a new number,  
select [Store as new channel], then  
press OK.  
To store the channel as the previously  
selected channel, select [Store  
current channel], then press OK.  
30 EN  
   
Rename channels  
You can rename channels.The name appears  
when you select the channel.  
Hide channels  
To prevent unauthorised access to channels,  
hide them from the channel list.  
1 While you watchTV, press FIND.  
1 While you watchTV, press FIND.  
» The channel matrix menu is displayed.  
» The channel matrix menu is displayed.  
2 Select the channel to rename.  
2 Select the channel to hide.  
3 Press  
OPTIONS.  
3 Press  
OPTIONS.  
» The channel options menu is displayed.  
» The channel options menu is displayed.  
4 Select [Hide channel], then press OK.  
4 Select [Rename channel], then press OK.  
» The channel is marked as hidden.  
5 To display the text input box, press OK.  
6 For each character, select a character, then  
press OK.  
Unhide channels  
To prevent unauthorised access to channels,  
hide them from the channel list.  
To select uppercase letters, lowercase  
letters or symbols: In the row below  
the space key, select the respective  
key, then press OK.  
1 While you watchTV, press FIND.  
» The channel matrix menu is displayed.  
7 When complete, select [Done], then press  
OK.  
2 Press  
OPTIONS.  
» The channel options menu is displayed.  
» The text input box closes.  
8 In the rename channel menu, select  
3 Select [Show hidden channels], then press  
OK.  
[Done], then press OK.  
» The hidden channels are displayed.  
4 Select the channel to unhide, then press  
Rearrange channels  
OPTIONS.  
After you install channels, you can rearrange the  
order in which they appear.  
5 Select [Unhide channel], then press OK.  
» The channel is no longer marked as  
hidden.  
1 While you watchTV, press FIND.  
» You can access the hidden channel.  
» The channel matrix menu is displayed.  
6 To exit, press  
.
2 Press  
OPTIONS.  
» The channel options menu appears.  
3 Select [Reorder], then press OK.  
Access CAM services  
4 Select the channel to rearrange, then press  
OK.  
and activate a CAM’ on page 36).  
» The selected channel is highlighted.  
2 Press  
OPTIONS.  
5 Move the highlighted channel to its new  
3 Select [Common interface].  
» Applications provided by the digitalTV  
service operator are displayed.  
location, then press OK.  
6 Press  
OPTIONS.  
7 Select [Done reordering], then press OK.  
Note  
This menu option is available only if the CAM is  
inserted and activated correctly.  
EN 31  
         
b EXT 1 (RGB and CVBS)  
7 Connect devices  
Analogue audio and video input from  
analogue or digital devices such as DVD  
players or game consoles.  
This section describes how to connect devices  
with different connectors. For the location of  
these connectors on yourTV, see the quick  
start guide. More examples of connections with  
other devices are provided in the Quick Start  
Guide.  
Note  
You can use different types of connectors to connect a  
device to yourTV.  
Tip  
After connection, for easy access to your device, add  
it to the home menu: press , then select [Add new  
device].  
c DIGITAL AUDIO OUT  
Digital audio output to home theatres and  
other digital audio systems.  
SPDIF OUT  
Back connections  
a TV ANTENNA  
Signal input from an antenna, cable or  
satellite.  
d SERV. U  
TV ANTENNA  
For use by service personnel only.  
32 EN  
   
e PC IN (VGA and AUDIO IN)  
g HDMI 2 (For selected models)  
Digital audio and video input from high-  
definition digital devices such as Blu-ray  
players.  
Audio and video input from a computer.  
VGA  
computer’ on page 35).  
VGA  
AUDIO IN  
LEFT/RIGHT  
VGA/DVI  
h EXT 2 (Y Pb Pr and AUDIO L/R)  
Analogue audio and video input from  
analogue or digital devices such as DVD  
players or game consoles.  
f HDMI 1 ARC  
Digital audio and video input from high-  
definition digital devices such as Blu-ray  
players.Also outputsTV audio to other  
EasyLink-compliant devices, such as home  
theatre systems.  
computer’ on page 35).  
EN 33  
d HDMI  
Digital audio and video input from high-  
Side connections  
definition digital devices such as Blu-ray  
players.  
a AUDIO L/R  
Audio input from analogue devices  
connected to VIDEO.  
e
(Headphone)  
Stereo audio output to headphones or  
earphones.  
b VIDEO  
Composite video input from analogue  
devices such asVCRs.  
f COMMON INTERFACE  
Slot for a Conditional Access Module  
(CAM).  
c USB  
Data input from USB storage devices.  
34 EN  
 
HDMI cable and HDMI-DVI adaptor  
Connect a computer  
AUDIO IN  
LEFT/RIGHT  
VGA/DVI  
Before you connect a computer to theTV  
Set the screen refresh rate on your  
computer to 60Hz.  
Select a supported screen resolution on  
your computer.  
Connect a computer with one of the following  
connectors:  
DVI  
Note  
Connections via DVI orVGA require an additional  
audio cable.  
VGA cable  
HDMI cable  
AUDIO IN  
LEFT/RIGHT  
VGA/DVI  
VGA  
DVI-HDMI cable  
AUDIO IN  
LEFT/RIGHT  
VGA/DVI  
DVI  
EN 35  
 
Access CAM services  
Use a Conditional Access  
Module  
and activate a CAM’ on page 36).  
2 Press  
OPTIONS.  
A Conditional Access Module (CAM) is  
provided by digitalTV service operators to  
decode digitalTV channels.  
3 Select [Common interface].  
» Applications provided by the digitalTV  
service operator are displayed.  
Note  
Note  
Refer to the documentation from your service  
operator on how to insert a smart card into the  
Conditional Access Module.  
This menu option is available only if the CAM is  
inserted and activated correctly.  
Insert and activate a CAM  
Use Philips EasyLink  
Caution  
Be sure to follow the instructions described below.  
Wrong insertion of a CAM may damage both the  
CAM and yourTV.  
Get the most out of your HDMI-Consumer  
Electronic Control (CEC) compliant devices  
with Philips EasyLink enhanced control features.  
If your HDMI-CEC compliant devices are  
connected through HDMI, you can control  
them at the same time with yourTV remote  
control.  
1 Switch off theTV and disconnect it from  
the power outlet.  
2 Following the directions printed on the  
CAM, gently insert the CAM into the  
COMMON INTERFACE at the side of the  
TV.  
To enable Philips EasyLink, you need to:  
Connect at least two HDMI-CEC  
compliant devices through HDMI  
Configure each HDMI-CEC compliant  
device properly  
Switch on EasyLink  
Note  
The EasyLink-compliant device must be switched on  
and selected as the source.  
Philips does not guarantee 100% interoperability with  
all HDMI CEC devices.  
3 Push the CAM in as far as it will go.  
4 Reconnect theTV to the power outlet.  
5 Turn on theTV and wait for the CAM to  
be activated.This may take several minutes.  
Do not remove the CAM from the slot  
when in use — this action deactivates  
digital services.  
36 EN  
     
Switch on or off EasyLink  
Use one-touch standby  
When you play an HDMI-CEC compliant  
device, theTV switches on from standby, and  
switches to the correct source.  
When you press on theTV remote control,  
theTV and all HDMI-CEC compliant devices  
switch to standby mode.  
1 Press (Standby-On) on theTV’s or  
device’s remote control.  
Note  
» TheTV and all connected HDMI  
devices switch to standby.  
If you do not intend to use Philips EasyLink, switch it off.  
SetTV speakers to EasyLink mode  
1 Press  
.
If you connect an HDMI-CEC compliant device  
that includes speakers, you can choose to hear  
theTV from those speakers instead of theTV  
speakers.  
2 Select [Setup] > [TV settings] >  
[EasyLink] > [EasyLink].  
3 Select [On] or [Off], then press OK.  
When you play content from an EasyLink  
compliant home theatre, if you want to mute  
theTV speakers automatically, turn on EasyLink  
mode.  
If the connected device is HDMI Audio Return  
Channel (ARC) compliant, and you connect the  
device through an HDMI ARC connector, you  
can outputTV audio through the HDMI cable.  
You do not need an additional audio cable.  
Use one-touch play  
1 After you switch on EasyLink, press play on  
your device.  
» TheTV automatically switches to the  
correct source.  
Use one-touch play control  
ARC connector (see ‘Back connections’ on  
If you connect multiple HDMI-CEC devices that  
support this setting, all such devices respond  
to the play control buttons on thisTV remote  
control.  
2 Select [Setup] > [TV settings] >  
[EasyLink] > [TV speakers].  
Caution  
3 Select one of the following, then press OK.  
This is an advanced setting. Devices that do not  
support this setting will not respond to theTV remote  
control.  
[Off]: Switch offTV speakers.  
[On]: Switch onTV speakers.  
[EasyLink]: StreamTV audio through  
the connected HDMI-CEC device.  
Switch theTV audio to the connected  
HDMI-CEC audio device through the  
adjust menu.  
1 Press  
.
2 Select [Setup] > [TV settings] >  
[EasyLink] > [EasyLink remote control].  
[EasyLink autostart]:Turn offTV  
speakers automatically and streamsTV  
audio to the connected HDMI-CEC  
audio device.  
3 Select [On] or [Off], then press OK.  
Note  
To mute theTV speakers, select [TV speakers] > [Off].  
EN 37  
     
Select speaker output with Adjust menu  
If [EasyLink] or [EasyLink autostart] are  
selected, access the adjust menu to switch the  
TV audio.  
HearTV audio through another  
device  
If you connect an EasyLink- compliant device  
that has speakers, you can get the most out of  
those speakers if you listen toTV audio through  
them.  
If the connected device is HDMI-ARC  
compliant, and you connect the device through  
an HDMI ARC connector, you can outputTV  
audio through the HDMI cable.You will not  
need an additional audio cable.  
1 While you watchTV, press ADJUST.  
2 Select [Speaker], then press OK.  
3 Select one of the following, then press OK:  
[TV]: On by default. StreamTV audio  
throughTV and the connected HDMI-  
CEC audio device until the connected  
device switches to system audio  
control.TV audio is then streamed  
through the connected device.  
ARC connector (see ‘Back connections’ on  
[Amplifier]: Stream audio through  
the connected HDMI-CEC device. If  
system audio mode is not enabled on  
the device, audio continue to stream  
from theTV speakers. If [EasyLink  
autostart] was enabled, theTV  
2 Press  
.
3 Select [Setup] > [TV settings] >  
[EasyLink] > [HDMI1 - audio out], then  
press OK.  
prompts the connected device to  
switch to system audio mode.  
4 Select one of the following, then press OK.  
[On]: Hear theTV audio through  
the connected EasyLink device.You  
cannot hear theTV audio through  
theTV speakers or through devices  
connected through the digital audio  
out connector.  
Maximise display for subtitled video  
Some subtitles can create a separate subtitle  
bar under the video, which limits the video  
display area.After you switch on auto subtitle  
shift, the subtitles display over the video image,  
which maximises the video display area.  
[Off]: Hear theTV audio through the  
TV speakers, or through a device  
connected through the digital audio  
out connector.  
1 Press  
.
2 Select [Setup] > [TV settings] >  
[EasyLink] > [Auto subtitle shift] > [On],  
then press OK.  
5 Control playback with theTV remote  
control play buttons.  
Retain picture quality  
Switch all EasyLink devices to standby  
If yourTV picture quality is affected by the  
picture-processing features of other devices,  
switch on Pixel Plus Link.  
To save electricity, you can switch all unused  
EasyLink-compliant devices to standby.  
1 Press the green button.  
1 Press  
.
2 Select [Switch off unused sources], then  
2 Select [Setup] > [TV settings] >  
[EasyLink] > [Pixel Plus Link] > [On],  
then press OK.  
press OK.  
» All connected EasyLink devices are  
switched to standby.  
38 EN  
       
Use a Kensington lock  
There is a Kensington security slot at the back  
of theTV. Prevent theft by looping a Kensington  
lock between the slot and a permanent object,  
such as a heavy table.  
EN 39  
 
8 Product  
information  
Tuner / Reception /  
Transmission  
Antenna input: 75ohm coaxial (IEC75)  
DVB: DVBTerrestrial, DVB-C*, DVB-T,  
MPEG4  
Product information is subject to change  
without notice. For detailed product  
TV system: DVB COFDM 2K/8K; PAL I,  
B/G, D/K; SECAM B/G, D/K, L/L’  
Video playback: NTSC, SECAM, PAL  
Tuner Bands: Hyperband, S-channel, UHF,  
VHF  
Supported display resolutions  
*For selected models  
Computer formats  
Resolution - refresh rate:  
640 x 480 - 60 Hz  
800 x 600 - 60 Hz  
1024 x 768 - 60Hz  
1280 x 720 - 60Hz  
1280 x 768 - 60Hz  
1280 x 1024 - 60 Hz  
1360 x 768 - 60Hz  
1680 x 1050 - 60Hz (For Full HD  
only)  
Remote control  
Type: PF01E11B  
Batteries: 2 x AAA (LR03 type)  
Power  
Mains power: 220-240V, 50-60Hz  
Standby power:  
1920 x 1080 - 60 Hz (For Full HD  
only)  
For xxPFL5xx6: < 0.15 W  
For xxPFL4xx6, xxPFL3xx6, and  
DesignLineTilt: < 0.3 W  
Video formats  
Resolution - refresh rate:  
480i - 60 Hz  
480p - 60 Hz  
576i - 50Hz  
576p - 50 Hz  
720p - 50 Hz, 60 Hz  
1080i - 50 Hz, 60 Hz  
1080p - 24Hz, 25Hz, 30Hz, 50Hz,  
60Hz.  
Ambient temperature: 5 to 40 degrees  
Celsius  
For power consumption, see the product  
The power rating stated on the product  
typeplate is the power consumption for this  
product during normal household use (IEC  
62087 Ed.2).The maximum power rating, stated  
between brackets, is used for electrical safety  
(IEC 60065 Ed. 7.2).  
Multimedia  
Supported storage device: USB (Only  
FAT or FAT 32 USB storage devices are  
supported)  
Supported multimedia file formats:  
Images: JPEG  
Audio: MP3  
Video: MPEG 2/MPEG 4, H.264  
40 EN  
           
SupportedTV mounts  
Product specification  
To mount theTV, purchase a PhilipsTV mount  
or a compatibleTV mount.  
Design and specifications are subject to change  
without notice.  
Warning  
47PFL4606H  
WithoutTV stand  
Follow all instructions provided with theTV  
mount. Koninklijke Philips Electronics N.V. bears no  
responsibility for improperTV mounting that results in  
accident, injury or damage.  
Dimension (WxHxD): 1129.8 x 697.8  
x 83 (mm)  
Weight: 17.5 kg  
WithTV stand  
Before you mount, perform these steps:  
Dimension (WxHxD): 1129.8 x 745.6  
x 268 (mm)  
Weight: 20.9 kg  
46PFL5606H  
1 To prevent damage to cables and  
connectors, leave a clearance of at least 2.2  
inches or 5.5cm from the back of theTV.  
WithoutTV stand  
2 For selected models, remove the wall  
Dimension (WxHxD): 1080.8 x 652.9  
x 39.9 (mm)  
Weight: 16.9 kg  
mount plugs from the back of theTV.  
3 Make sure that your mounting bolts follow  
these specifications:  
WithTV stand  
Dimension (WxHxD): 1080.8 x 705.2  
x 294.9 (mm)  
Weight: 20.52 kg  
TV screen Required Required mounting  
size  
(inches)  
47  
pitch  
(mm)  
bolts  
42PFL4606H  
400 x 300 4 x M8 (10 mm)  
400 x 400 4 x M6 (11/12 mm)  
300 x 200 4 x M6 (10 mm)  
400 x 400 4 x M6 (11/12 mm)  
300 x 200 4 x M6 (10 mm)  
200 x 200 4 x M6 (10 mm)  
100 x 100 4 x M4 (10 mm)  
100 x 100 4 x M4 (10 mm)  
WithoutTV stand  
46  
42  
40  
37  
32  
26  
22  
Dimension (WxHxD): 1018.5 x 635.1  
x 83 (mm)  
Weight: 11.7 kg  
WithTV stand  
Dimension (WxHxD): 1018.5 x 683 x  
236.4 (mm)  
Weight: 14.2 kg  
42PFL3606H/42PFL3506H  
WithoutTV stand  
Dimension (WxHxD): 1018.5 x 635.8  
x 83 (mm)  
Weight: 11.7 kg  
WithTV stand  
Dimension (WxHxD): 1018.5 x 683 x  
236.4 (mm)  
Weight: 14.2 kg  
EN 41  
   
40PFL5606H/40PFL5616H  
32PFL3406H  
WithoutTV stand  
WithoutTV stand  
Dimension (WxHxD): 946 x 577.5 x  
40 (mm)  
Weight: 12.3 kg  
Dimension (WxHxD): 787.5 x 505.1  
x 80.5 (mm)  
Weight: 7.8 kg  
WithTV stand  
WithTV stand  
Dimension (WxHxD): 946 x 631 x  
243.6 (mm)  
Weight: 15 kg  
Dimension (WxHxD): 787.5 x 547.26  
x 221.43 (mm)  
Weight: 9.4 kg  
37PFL4606H  
26PDL49x6H  
WithoutTV stand  
WithoutTV stand  
Dimension (WxHxD): 912.3 x 577.1.  
x 84.1 (mm)  
Weight: 10.3 kg  
Dimension (WxHxD): 641.5 x 428.3  
x 38.7(mm)  
Weight: 8.30 kg  
WithTV stand  
WithTV stand  
Dimension (WxHxD): 912.3 x 625.2  
x 236.4 (mm)  
Weight: 12.8 kg  
Dimension (WxHxD): 641.5 x 428.3  
x 166.4 (mm)  
Weight: 8.98 kg  
32PFL5x06H  
22PDL49x6H  
WithoutTV stand  
WithoutTV stand  
Dimension (WxHxD): 761 x 473 x  
39.9 (mm)  
Weight: 7.2 kg  
Dimension (WxHxD): 532.5 x 357 x  
36.6 (mm)  
Weight: 5.6 kg  
WithTV stand  
WithTV stand  
Dimension (WxHxD): 761 x 525.5 x  
221 (mm)  
Weight: 8.9 kg  
Dimension (WxHxD): 532.5 x 357 x  
127 (mm)  
Weight: 5.9 kg  
32PFL4606H  
WithoutTV stand  
Dimension (WxHxD): 795.6 x 510.6  
x 93.1 (mm)  
Weight: 8.2 kg  
WithTV stand  
Dimension (WxHxD): 795.6 x 557.6  
x 221.4 (mm)  
Weight: 9.8 kg  
32PFL3606H/32PFL3506H  
WithoutTV stand  
Dimension (WxHxD): 795.6 x 508.4  
x 93.1 (mm)  
Weight: 8.2 kg  
WithTV stand  
Dimension (WxHxD): 795.6 x 557.6  
x 221.4 (mm)  
Weight: 9.8 kg  
42 EN  
Cannot remove ‘e-sticker’ banner displayed on  
theTV.  
9 Troubleshooting  
To remove the logos and images, set the  
location of yourTV to home.  
This section describes commonly encountered  
issues and accompanying solutions.  
1. Press  
.
2. Select [Setup] > [TV settings] >  
[Preferences] > [Location].  
3. Select [Home] and press OK.  
GeneralTV issues  
TheTV does not switch on:  
TV channel issues  
Disconnect the power cable from the  
power outlet.Wait for one minute then  
reconnect it.  
Previously installed channels do not appear in  
the channel list:  
Check that the power cable is securely  
connected.  
Check that the correct channel list is  
selected.  
The remote control is not working properly:  
No digital channels were found during the  
installation:  
Check that the remote control batteries  
are correctly inserted according to the  
+/- orientation.  
Check that theTV supports DVB-T, DVB-T  
Lite or DVB-C in your country.  
Replace the remote control batteries if  
they are flat or weak.  
Clean the remote control andTV sensor  
lens.  
Some channels are not automatically installed  
on myTV:  
During installation, make sure that you  
select the country where you are installing  
theTV.  
The standby light on theTV blinks red:  
Disconnect the power cable from the  
power outlet.Wait until theTV cools down  
before reconnecting the power cable. If the  
blinking reoccurs, contact Philips Consumer  
Care.  
Picture issues  
TheTV is on, but there is no picture:  
You forgot the code to unlock theTV lock  
feature  
Check that the antenna is properly  
connected to theTV.  
Enter ‘8888’.  
Check that the correct device is selected  
as theTV source.  
TheTV menu is in the wrong language.  
Change theTV menu to your preferred  
language.  
There is sound but no picture:  
Check that the picture settings are  
correctly set.  
When turning theTV on/off/to standby, you  
hear a creaking sound from theTV chassis:  
There is poorTV reception from an antenna  
connection:  
No action is required.The creaking sound  
is normal expansion and contraction of the  
TV as it cools down and warms up.This  
does not impact performance.  
Check that the antenna is properly  
connected to theTV.  
Loudspeakers, unearthed audio devices,  
neon lights, high buildings and other large  
objects can influence reception quality.  
If possible, try to improve the reception  
quality by changing the antenna direction  
or moving devices away from theTV.  
EN 43  
       
If reception on only one channel is poor,  
fine tune this channel.  
HDMI connection issues  
There is poor picture quality from connected  
devices:  
There are problems with HDMI devices:  
Note that HDCP (High-bandwidth Digital  
Content Protection) support can delay the  
time taken for aTV to display content from  
a HDMI device.  
Check that the devices are connected  
properly.  
Check that the picture settings are  
correctly set.  
If theTV does not recognise the HDMI  
device and no picture is displayed, try  
switching the source from one device to  
another and back again.  
TheTV did not save your picture settings:  
Check that theTV location is set to the  
home setting.This mode offers you the  
flexibility to change and save settings.  
If there are intermittent sound disruptions,  
check that output settings from the HDMI  
device are correct.  
If you use an HDMI-to-DVI adapter  
or HDMI-to-DVI cable, check that an  
additional audio cable is connected to  
AUDIO IN (mini-jack only).  
The picture does not fit the screen; it is too  
big or too small:  
Try using a different picture format.  
The picture position is incorrect:  
Picture signals from some devices may not  
fit the screen correctly. Check the signal  
output of the device.  
Computer connection issues  
Sound issues  
The computer display on theTV is not stable:  
There is a picture but sound quality is poor:  
Check that your PC uses the supported  
resolution and refresh rate.  
Note  
Set theTV picture format to unscaled.  
If no audio signal is detected, theTV automatically  
switches the audio output off — this does not indicate  
malfunction.  
Contact us  
Check that all cables are properly  
connected.  
Check that the volume is not set to 0.  
Check that the sound is not muted.  
If you cannot resolve your problem, refer to the  
FAQs for this product at  
If the problem remains unresolved, contact  
Philips Consumer Care in your country as listed  
in the Addendum.  
There is a picture but the sound quality is  
poor:  
Check that the sound settings are correctly  
set.  
Warning  
There is a picture but sound comes from one  
speaker only:  
Do not attempt to repair the product yourself.This may  
cause severe injury, irreparable damage to your product  
or void your warranty.  
Verify that sound balance is set to the  
centre.  
Note  
Make a note of yourTV model and serial number  
before you contact Philips.These numbers are printed  
on the back of theTV and on the packaging.  
44 EN  
       
dimensions  
display, wallpaper  
10 Index  
E
A
EasyLink  
age rating  
2222  
control devices, fromTV remote  
enable  
hear from other speakers  
automatically  
analogue channels  
language, change  
audio language  
manually  
picture quality, retain  
subtitled video, maximise view  
switch to standby, all devices  
Electronic Programme Guide  
environmental care  
end of use  
recycle  
while you watchTV  
EPG, menu  
C
CAM  
enable  
Insert  
care  
channels  
channel list  
favourites  
hide or unhide  
install (automatic)  
rearrange  
rename  
reorder  
switch  
update  
child lock  
clock  
common interface  
computer, see PC  
Conditional Access Module  
connect  
connect device  
connect, PC  
connect, USB  
connectors  
controls  
F
factory settings  
favourites list, add  
22  
H
HDMI  
HDMI ARC  
hearing impaired  
high-definition (HD), content  
home menu  
home mode  
I
install  
install channels  
install channels (automatic)  
D
demo  
K
devices  
add  
watch  
kensington lock  
digital channels  
digital radio  
language, change  
subtitles  
23  
EN 45  
 
software  
digital broadcast update  
version  
sound settings  
specifications  
standby  
subtitle, language  
subtitles  
L
language  
audio  
menu  
subtitles  
17  
location, home or shop  
switch  
switchTV on or off  
M
10  
multimedia  
multimedia, play files  
muteTV speakers  
37  
T
teletext  
dual screen  
enlarge  
subpages  
Table Of Pages  
teletext 2.5  
troubleshoot  
P
PC, display resolutions  
picture format  
picture settings  
Pixel Plus link  
position theTV  
power  
15  
U
universal access  
R
recycle  
reinstallTV  
remote control  
onscreen  
V
visually impaired  
volume  
overview  
rename channels  
reorder channels  
W
wall mount  
S
Scenea, see screen saver  
Scenea, switch on  
screen care  
screen saver  
settings  
assistant  
picture  
sound  
shop mode  
sleeptimer  
smart picture  
smart sound  
15  
17  
46 EN  
Information about how to  
re-tune your TV during the  
digital TV switchover.  
Television in the UK is going digital, bringing us How the switchover affects  
all more choice and new services. Starting in  
late 2007 and ending in 2012, television  
your TV equipment:  
services in the UK will go completely digital, TV  
region by TV region.  
Your new TV has a digital tuner built in, which  
means it is ready to receive the Freeview signal  
by simply plugging it into your aerial socket  
(check if you can get digital TV through your  
aerial now, or whether you’ll have to wait until  
switchover, at www.digitaluk.co.uk).  
Please see the next page to find out when your  
area switches to digital.  
Digital UK is the independent, non-profit  
organisation leading the process of digital TV  
switchover in the UK. Digital UK provides im-  
partial information on what people need to do  
to prepare for the move to digital, and when  
they need to do it.  
When the TV switchover happens in your area,  
there are at least two occasions when you will  
need to re-tune your TV in order to continue  
receiving your existing TV channels, and also to  
pick up new ones.  
EN 47  
Digital UK, the body leading the digital TV  
switchover, will advise you when you need to  
re-tune during the switchover.  
How to re-tune:  
1. Press h on the remote control.  
2. Select Setup and press OK.  
If you do not re-tune your channels when  
advised to do so by Digital UK, you may lose  
some or all of your channels until you do  
re-tune. You should re-tune your TV every  
few months to check for any new channels.  
If you choose to connect your TV to satellite or  
cable with a digital box then it will not be  
affected by switchover, and you won’t need to  
re-tune.  
3. Select Search for channels and press OK.  
4. Select Reinstall channels and press OK.  
5. Select your country (UK) and press OK.  
6. Select Antenna DVB-T and press OK.  
7. Select Start and press OK.  
The installation can take several minutes.  
When the installation is complete, press OK.  
Your TV is now retuned.  
If you have any questions, please contact your  
equipment supplier or call Digital UK on …  
If you are missing any channels, it may be  
that they are not available in your area, or  
that your aerial needs upgrading.  
When does switchover happen?  
*
Copeland switches on October 17, 2007  
The exact date you switch  
depends on the transmitter  
you are served by. To check  
when you switch, go to  
Digital UK’s postcode  
checker on  
Check your ITV news service  
or look at Teletext page 106  
to see what TV region you’re  
in.  
Visit us at digitaluk.co.uk  
Call us on 0845 6 50 50 50†  
*
Calls charged at BT rate of 3p per minute daytime and  
1p per minute evenings and weekends. Rates may vary  
for calls from non-BT lines.  
48 EN  
© 2011 Koninklijke Philips Electronics N.V.  
All rights reserved.  

Iiyama AX3835UTBK User Manual
Intel D845EPT2 User Manual
Jenn Air Cooktop CVE1400 User Manual
JVC AV 28H5SL User Manual
Lenovo THINKCENTRE 4476 User Manual
LG Electronics MU 50PZ44VS User Manual
Logitech Compact Keyboard K300 User Manual
Magnavox 27MDTR10S User Manual
Philips 222E2 User Manual
Philips 235BL2 User Manual