Colour television
32PW4523
Operating instruction
Introduction
Thank you for your confidence in Philips TV.
This handbook has been designed to help you install and operate your TV set
with ease.
We would strongly recommend that you read through it thoroughly.
Do not discard packaging materials
1. without thorough inspection for parts and that accessories that may be packed
separately inside the carton.
2. during the warranty period should you need to exchange the set.
Table of Contents
Installation
Installing your television set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The keys on the TV set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Remote control keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Auto Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Manual Store . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Channel Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Operation
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Sound adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Feature settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
16:9 Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Signal Strength
Active Control
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Teletext
Peripherals
DVD player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Video recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Side connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Practical information
Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used appliances
and dismantle them after retrieving any materials that can be used again (ask
your dealer for further details).
1
Installing your television set
Positioning the television set
Remote control
5 cm
5 cm
5 cm
Place yourTV on a solid, stable surface, leaving
a space of at least 5 cm around the appliance.
To avoid accidents, do not put anything on the
set such as a cloth or cover, a container full of
liquid (vase) or a heat source (lamp).The set
must not be exposed to water.
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set toTV.
The batteries supplied with this appliance do
not contain mercury or nickel cadmium. If you
have access to a recycling facility, please do not
discard your used batteries (if in doubt,
consult your dealer).When the batteries are
replaced, use the same type.
Connections
Switching on
FM.
ANT.
• Insert the aerial plug into the x socket at
the rear of the set.
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 4.
If the television remains in standby mode,
press CH+ on the remote control.
The indicator will flash when you use the
remote control.
If you are using an indoor aerial, reception may be
difficult in certain conditions. You can imprvoe
reception b rotating the aerial. If the reception
remains poor,you will need to use an external aerial.
• Insert the mains plug into a wall socket
220-240 V/50 Hz).
The keys on theTV set
The television set has 4 keys which are located
on the top.
V
TheVOLUME - + (-
+) keys are used to
adjust sound levels.The PROGRAM - + (- P +)
keys are used to select the required programmes.
To access the menus, simultaneously hold down
+
CH
V
V
+ keys.The CH - + keys may
the
- and
–
M
–
+
then be used to select an adjustment and the
V
-
+ keys to make that adjustment.
To exit from the menus, hold down the 2
-
V
V
and
+ keys.
2
Remote control keys
Teletext /Personal Zapping
In teletext mode, the colour keys
allows direct access to an item or
corresponding pages (p.9)
In Personal Zapping mode, you
can surf up to 10 personal
Standby
Lets you place the TV set on
standby. To turn on the TV,
press CH + or –, 2 or digit
keys
Teletext keys (p. 9)
channels for each key (p.8)
Delete Personal Zapping list
Deletes stored channels from
Personal Zapping list (p.8)
Add Personal Zapping list
Adds and stores channels into
Personal Zapping list (p.8)
Smart Picture
No function.
Used to access a series of
stored settings: DVD/VCD,
Rich, Natural, Soft or
Personal.
Smart Sound
Used to access a series of
stored settings: Theatre,
Music, Voice or Personal.
Incredible Surround
To activate/disable the
Incredible Surround feature. In
stereo, the speakers appear
further apart. in mono, a
pseudo-spatial effect is
obtained.
Menu
To call up or exits menus.
Cursor
These 4 keys are used to
move around the menus or
provide direct access to the
different 16:9 formats (p.7)
Channel selection
To access the next or
previous channel. The number
and sound mode aredisplayed
for a few moments whenever
you select a new channel.
Volume
To adjust the sound level.
Alternate channel
Switched between the current
and the previous channel.
Mute
To mute or restore sound.
Teletext key (p. 9)
Digit keys
Direct access to the channels.
For a 2-digit channel, enter the
2nd digit before the dash
disappears.
On screen display
To display/clear the on screen
information. Press the key for
5 seconds to activate
permanent display of channel
number. This key is also used
to exit from the menu.
Sleeptimer
Selects a period of time after
which the TV will go into
AV channel selection
Press several times to select
AV1, AV2 or FRONT.
standby mode automatically.
3
Language
When there is no signal input to the TV, you
may encounter instability of the screen display.
Use the
choice.
key to select a language of your
In this instance, please use the
an AV channel.
key to select
To quit the menus, press
.
The Language feature is used to change the
display language for menus.
MENU
Press the
key.
With the cursor, select the Install menu and
follow by the Language:
Main
¥ Picture
Install
œ
¥Sound
¥Features
✔Install
✔Language
¥AutoStore
¥ManualStore
¥ChannelEdit
Englishπ
Auto Store
This menu is used to store all available channels
automatically.
All the available TV channels will be stored.
This operation takes a few minutes. The display
shows the progress of the search and the number
of channels found.
MENU
Press the
key.
With the cursor, select the Install menu and
follow by the Auto Store.
At the end of the search, the menu disappears.
MENU
To exit or interrupt the search, press
.
If no channels are found, consult the possible solutions
on p. ?.
Main
¥ Picture
Install
œ
¥Sound
¥Features
✔Install
¥Language
✔AutoStore
¥ManualStore
¥ChannelEdit
π
AutoStore
¥ Channel
¥ TV
2
470MHz
¥ ¥¥¥¥¥¥¥¥¥¥¥¥π¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
✔Language Englishπ
4
Manual store
This menu is used to store channels one at atime.
Search: Press
. The search starts. Once
Press the
key.
a channel is found, the scanning stops. Go to
the next step.
With the cursor, select the Install menu and
follow by the Manual Store:
If no picture is found, consult the possible solutions (p.?)
Channel: enter the required channel with the
or digit keys.
FineTune:ifthereceptionisnotsatisfactory,
Mainge
¥ Picture
ManualStore
¥Sound
¥Features
Install
✔
adjustusingthe
Store:Press
Repeatsteps to foreachchannelyouwishto
store.
keys.
ColourSystem
¥SoundSystem
¥Search
Auto
π
.Thechannelisstored.
¥Channel
¥FineTune
¥Stor
e
Toquitthemenus,press
.
Colour System: use the
or
key to
select the desired colour system; Auto, PAL,
NTSC 3.58, NTSC 4.43 or SECAM.
Sound System: use the
or
key to
select the desired sound system; Auto, BG,
I, DK or M.
u
Channel edit
This feature allows you to skip or edit
channels which have bad or weak TV signal
or channels you do not watch often.
& Presss
key. The Main menu is displayed
on the screen.
é With the cursor, select the Install menu
followed by the Channel Edit menu.
“ Enter into the menu and select the channel
number you wish to skip by the digit keys.
Once a channel is skipped, you cannot have
access to it by the V(Channel) + or – key.
You can only access the channels by the digit
(0-9) keys.
‘
(
§
Then use the
Use the
Repeat steps “ and ‘ for each channel you
wish to skip.
key to select Skipped.
key to select On.
Mainge
¥ Picture
¥Sound
¥Features
✔Install
To quit the menus, press
.
Install
œ
Channel
Skipped
¥Language
¥AutoStore
¥ManualStore
✔ChannelEdit
To restore skipped channels
&
é
Repeat steps & to “ above.
π
Use the
key to select Skipped and the
key to select Off.
Install
œ
“
‘
Repeat steps & and é for each channel you
wish to skip.
✔Channel
¥Skipped
2
π
To quit the menus, press
.
5
Picture settings
Press
displayed:
then
. The Picture menu is
Description of the adjustments:
• Brightness: this changes picture
brillance.
• Colour: this changes the intensity of the
colour.
• Contrast: this changes the difference.
between the light and dark tones.
• Sharpness: this changes the picture
definition.
Mainge
Picture
✔
✔Picture
¥Sound
¥Features
¥Install
Brightness
--I-----3-9
¥Colour
¥Contrast
¥Sharpness
¥ColourTem p.
¥More...
• ColourTemp.: this changes the colour
rendering: Cold(bluer), Normal(balanced)
or Warm (redder).
• NR: attenuates picture noise (snow)
in difficult reception conditions.
• Contrast +: automatic adjustment of the
the picture contrast which permanently
sets the darkest part of the picture
black.
Use the
the
keys to select a setting and
keys to adjust.
Note: during the picture adjustment, only the
selected line remains displayed. Press
display the menu again.
to
Once the adjustments have been made,
• Store: to store the picture adjustments
select
Store and press
to store them.
and settings (as well as the settings for
and NR in the Featuresmenu).
Contrast +
to exit.
Press
Sound adjustments
Press
, select Sound (
) and press
.
Description of the settings:
• Treble: this alters the high frequency
sounds.
The Soundmenu is displayed:
• Bass: this alters the high frequency
Mainge
¥Picture
Sound
✔Treble
¥Bass
¥Balance
¥AVL
sounds.
----I---56
✔Sound
¥Features
¥Install
• Balance: this balances the sound on
the left and right speakers.
¥Incr.Surround
¥UltraBass
• AVL (AutomaticVolume Leveller): this is
used to limit increases in sound, especially
on channel change or advertising slots.
• Incredible Surround: this boost the
effect of stereo sound.
Use the
the
keys to select a setting and
keys to adjust.
• Ultra Bass: this is used to enhanced
Once the adjustments have been made, select
Store and press to store these changes.
To quit the menus, press
bass output.
.
Feature settings
Press
You can adjust:
, select Features(
) and press
.
Description of the adjustments:
• Rotation: large screen TVs are
sensitive to terrestrial magnetic field
variations. This setting is used to
compensate for this by adlusting the
Mainge
¥Picture
Features
✔Rotation
¥Format
¥SignalStrength
¥ActiveControl
----I---5
¥Sound
✔Features
¥Install
picture rotation. Use the
to adjust.
keys
• Format, Signal Strength and
Active Control: see explanation on
the next page.
6
Formats
The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format
(conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen
(letterbox format).This function allows you to optimise the picture display on screen.
Automatic switching
ThisTV set is also equipped with automatic switching which will select the correct-screen format,
provided the specific signals are transmitted with the programmes.
This automatic format can olso be modified manually.
Using the different screen formats
Press the
key (or
) to select the different modes:
4:3, Zoom 14:9, Zoom 16:9, SubtitleZoom, SuperWideand Widescreen.
4:3 Mode
The picture is reproduced in 4:3 format and a black band is
displayed on either side of the picture.The picture may be
progressively enlarged using the
keys.
Zoom 14:9 Mode
The picture is enlarged to 14:9 format, a thin black band
remains on both sides of the picture.The
keys allow
you to compress and move the image vertically to view the
top or bottom of the picture (subtitles).
Zoom 16:9 Mode
The picture is enlarged to 16:9 format.This mode is
recommended when displaying pictures which have black
bands at the top and bottom (letterbox format).
Use the
keys if you wish to compress and move the
image vertically to view the top or bottom of the picture.
Subtitle Zoom Mode
This mode is used to display 4:3 pictures using the full
surface of the screen leaving the sub-titles visible.
Use the
keys to increase or decrease the
compression at the bottom of the screen.
SuperWide Mode
This mode is used to display 4:3 pictures using the full
surface of the screen by enlarging the sides of the picture.
The
keys allow you to scroll the image up or down
the screen.
Widescreen Mode
This mode restores the correct proportions of pictures
transmitted in 16:9 using full screen display.
Note: If you display a 4:3 picture in thid mode, it will be enlarged
horizontally.
7
Signal Strength
This feature displays the signal strength level
at the bottom of the screen. Select the option
On and it will appear each time you switch to
a new channel.
Use the
Strength and press the
On.
Press
key to select Signal
key to select
to exit.
Press
and press the
, use the
key to select Features
key.
The Features menu is displayed:
Mainge
¥ Picture
Features
• Rotation
¥Format
----I---5
¥Sound
✔Features
¥Install
✔SignalStrength
¥ActiveControl
Active Control
This feature displays the signal strength level
at the bottom of the screen. Select the option
On and it will appear each time you switch to
a new channel.
Use the
Strength and press the
On.
Press
key to select Signal
key to select
to exit.
Press
and press the
, use the
key to select Features
key.
The Features menu is displayed:
Mainge
¥ Picture
¥Sound
✔Features
¥Install
Features
• Rotation
¥Format
----I---5
✔SignalStrength
¥Active Control
Personal Zapping
A list or series of favourite TV programs can be
selected and stored in the 4 coloured keys with the
Personal Zapping feature. With this feature you can
easily viewed up to a total of 10 preferred channels
for each coloured key.
To view channels:
Select and press a colour key that has stored
channels repeatedly to select the channel you
want to view.
To delete channels:
To add channels:
Select a channel with the digit keys.
Select and press a colour key that has stored
channels repeatedly to select the channel you
want to delete.
Press
Press your favourite colour key to store the channel
in step
Repeat steps
Press to exit.
to display list.
Press
Press
to display list.
to remove channel.
.
to
store more channels.
Repeat steps
Press to exit.
to
delete more channels.
8
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar
with the transmission language (cable networks, satellite channels, etc.).
Press :
You will obtain:
Teletext call
This is used to call teletext, change to transparent mode
and then exit.The summary appears with a list of items
that can be accessed. Each item has a corresponding 3
digit page number.
If the channel selected does not broadcast teletext, the
indication 100 will be displayed and the screen will remain
blank (in this case, exit teletext and select another channel).
Selecting a
page
Enter the number of the page required using the digit,
0
9
CH + or – or
keys. Example: page 120, enter
1,2 and 0. The number is displayed on the top left, the
counter turns and then the page is displayed. Repeat this
operation to view another page.
If the counter continues to search, this means that the page is
not transmitted. Select another number.
Coloured areas are displayed at the bottom of the screen.
The 4 coloured keys are used to access the items or
corresponding pages.
Direct access
to the items
The coloured areas flash when the item or the page is not yet
available.
Contents
This returns you to the contents page (usually page 100).
Temporary
stop
This is used to temporarily disable or activate the teletext
display.
Enlarge a page
This allows you to display the top or bottom part of the
page and then return to normal size.
Stop sub-page
acquisition
Certain pages contain sub-pages which are automatically
displayed successively.This key is used to stop or resume
sub-page acquisition.The indication 2 appears top left.
To display or hide the concealed information (games
solutions).
Hidden
information
For teletext programs 0 to 40, you can store 4 favourite
pages which can then be accessed directly using the
coloured keys (red, green, yellow, blue).
Favourite
pages
Press the
key to change to favourite pages mode.
Display the teletext page that you want to store.
Press the coloured key of your choice for 3 seconds.
The page is now stored.
Repeat the operation with the other coloured keys.
You can now consult teletext and your favourite
pages will appear in colour at the bottom of the
screen.To retrieve the standard items, press
To clear everything, press for 5 seconds.
.
9
Connecting peripheral equipment
The television has 3 external sockets situated at the back of the set (AV1 in, AV2 in and Monitor out).
The AV1 in socket has Y, Pb, Pr and audio and video inputs.
The AV2 in socket has S-Video, audio and video inputs.
The Monitor out socket has audio and video outputs.
DVD player
Connect the TV's green, blue and red Y Pb Pr (AV1 in)
jacks to the corresponding COMPONENT VIDEO IN
jacks on the player.
Connect the TV's red and white (R and L) AUDIO IN
jacks to the corresponding AUDIO OUT jacks on the
player. Match the cable colour to the jacks' colour. The
AV1 in
red jack is the Right audio channel and the white jack
is the Left audio channel.
D
Turn on the TV and DVD player. Set the TV to AV2 and
VD Player
DVD background screen will come on the screen. You
can now play your disc.
Video recorder
Connect the TV's yellow, white and red (AV2 in)
jacks to the corresponding Video and audio jacks on the
player.
Connect the TV's red and white (R and L) AUDIO IN
jacks to the corresponding AUDIO OUT jacks on the
player. Match the cable colour to the jacks' colour. The
red jack is the Right audio channel and the white jack
is the Left audio channel.
AV2 in
Turn on the TV and VCR player. Set the TV to AV1. You
can now play your video cassette tape.
VCR
Connection is also possible via the aerial cable. You will therefore
need to tune in your video recorder's test signal and assign a
channel number 0. Select channel 0 to playback.
Satellite receiver, decoder, games, etc.
Carry out the connections shown opposite.
Other equipment
To optimise picture quality, connect the equipment which
produces the RGB signals (digital decoder, games, etc) to
AV1 in and equipment which produces the S-VHS signals
(S-VHS and Hi-8 video recorders, certain DVD drives to
AV2 in and all other equipment to either AV1 in or AV2 in.
AV1 in
To connect to a hi-fi system, use an audio connection cable
and connect the "L" and "R" outputs on the TV set to the
"AUDIO IN" "L" and "R" input on your hi-fi amplifier.
Amplifier
10
Side connections
Make the connections as shown opposite.
With the key, select AV.
For a monophonic device, connect the audio signal to the
AUDIO L input. Use the key to reproduce the sound
on the left and right speakers of theTV set.
Headphones
When headphones are connected, the sound on the
TV set will be cut.The CH + or – keys are used to
adjust the volume level.
The headphone impedance must be between 32 and
600 Ohms.
11
Tips
Poor reception
No sound
If on certain channels you receive a picture
The proximity of mountains or high buildings
may be responsible for ghost pictures, echoing
or shadows. In this case, try manually adjusting
your picture: see FineTuning (p.5) or modify
the orientation of the outside aerial.
Does your antenna enable you to receive
broadcasts in this frequency range (UHF or
VHF band)?
but no sound, this means that you do not have
the correctTV system. Modify the System
setting (p. 5).
Teletext
Are certain characters not displayed
correctly? Check that the Country setting
has been positioned correctly (p.5).
Remote control
In the event of difficult reception (snowy
picture) switch the NR on the Options
menu to ON. (p. 6).
TheTV set does not react to the remote
control; the indicator on the set no longer
flashes when you use the remote control?
Replace the batteries.
No picture
If the television does not switch on, please
press the standby key
remote control) twice.
(located on the
Standby
When you switch theTV set on it remains in
standby mode and the indication Locked is
displayed when you use the keys on theTV set?
The Child Lock function is switched On (p. 7).
If the set receives no signal for 15 mins, it
automatically goes into standby mode.
To save power, your set is fitted with components
that give it a very low power consumption when
in standby mode (less than 3W).
Have you connected the aerial socket properly?
Have you chosen the right system? (p. 5).
Poorly connected euroconnector cables or
aerial sockets are often the cause of picture or
sound problems (sometimes the connectors
can become half disconnected if theTV set is
moved or turned). Check all connections.
Peripheral equipment gives a black and
white picture
Still no results?
If yourTV set breaks down, never attempt to
repair it yourself: contact your dealer's after-
sales service.
You have not selected the right socket with
the 4 key: S-VHS2 (S-VHS3) instead of
EXT2 (EXT3).To play a video cassette, check
that it has been recorded under the same
standard (PAL, SECAM, NTSC) which can be
replayed by the video recorder.
Cleaning the set
Only use a clean, soft and lint-free cloth to
clean the screen and the casing of your set.
Do not use alcohol-based or solvent-based
products.
The remote control no longer works.
Check that the mode selector on the side of
the remote control is set toTV.
Glossary
RGB Signals:These are 3 Red, Green and Blue video signals which directly drive the red, green and
blue emitters in the cathode ray tube. Using these signals provides better picture quality.
S-VHS Signals: These are 2 separateY/C video signals from the S-VHS and Hi-8 recording standards.
The luminance signalsY (black and white) and chrominance signals C (colour) are recorded
separately on the tape.This provides better picture quality than with standard video (VHS and 8
mm) where theY/C signals are combined to provide only one video signal.
NICAM sound: Process by which digital sound can be transmitted.
System:Television pictures are not broadcast in the same way in all countries.There are different
standards: BG, DK, I, and L L’.The SYSTEM setting (p. 6) is used to select these different standards.
This is not to be confused with PAL or SECAM colour coding. Pal is used in most countries in
Europe, Secam in France, Russia and most African countries.The United States and Japan use a
different system called NTSC.The inputs EXT1 and EXT2 are used to read NTSC coded recordings.
16:9: Refers to the ration between the length and height of the screen.
Wide screen televisions have a ration of 16/9, conventional screenTV sets have a ration of 4/3.
12
Specification
Product type
32PW4523
Picture
• Picture screen diameter: 820 mm
• Visible screen size: 760 mm
• Smart Picture Modes
• Contrast Plus
• Sharpness Control
• Colour Temperature Control
• 6 Widescreen modes
• Noise Reduction
• Scan Velocity Modulation
• Active Control
• Signal Strength Indicator
Sound
• Sound output: 2 x 10 W
• Loudspeakers: Full range
• Smart Sound Modes
• Incredible Surround
• Nicam Stereo
• Auto volume Leveller
Reception
• Tuning system: PLL digital tuning
• Tuner: UV, S and Hyperband (Pal Multisystem)
• Channel Selection: 100 presets
• Aerial input: 75 ohm coaxial
• TV System: NTSC 3.58-4.5, Pal BG, Pal D/K, Pal I,
Secam BG, Secam DK, Secam K1
• Video playback: NTSC 4.43/3.58
• Stereo systems: AV Stereo, 2Cs BG, BTSC dBx,
Nicam DK, Nicam BG, Nicam I
Teletext
• Reception standards: TOP
• Smart text: 1 page memory
Connectors
• Side: Stereo headphone out (3.5 mm)
Stereo Audio/Video input
• Rear: Stereo Audio/Video input x 2
Stereo Audio/Video output x 1
Component Video Input
S-Video input
Ease of use
• Multi language on screen display
• Personal Zapping
• Alternate channel
• Sleeptimer
13
|