Philips 22PFL4907 User Manual

Register your product and get support at  
32PFL4907  
26PFL4907  
22PFL4907  
EN: For further assistance, call the customer support service in your country.  
To obtain assistance, contact Philips Customer Care Center;  
In the U.S.A., Canada, Puerto Rico, or the U.S.Virgin Islands 1 866 309 0843  
México D.F. and Área Metropolitana; 58 87 97 36  
EN User Manual  
Interior de la Republica; 01 800 839 19 89  
ES Manual del Usuario  
FR Manuel d’Utilisation  
ES: Para obtener más información, llame al servicio de soporte al cliente de su  
país.  
Para obtener asistencia, comuníquese con Centro de atención al cliente de Philips;  
En los Estados Unidos, en Canadá, Puerto Rico o en las IslasVírgenes de los Estados Unidos;  
1 866 309 0843  
México D.F. y Área Metropolitana; 58 87 97 36  
Interior de la Republica; 01 800 839 19 89  
FR: Pour obtenir de l’aide supplémentaire, communiquez avec le centre de service  
à la clientèle de votre pays.  
Pour obtenir de l’aide, communiquez avec le centre de service à la clientèle Philips au;  
Dans le États-Unis, au Canada, à Puerto Rico ou aux ÎlesVierges américaines; 1 866 309 0843  
México D.F. et Área Metropolitana; 58 87 97 36  
Interior de la Republica; 01 800 839 19 89  
English  
3
Return your Product Registration Card or visit at  
Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don't miss out.  
Complete and return your Product Registration Card at once or visit at www.philips.com/support to ensure:  
*Product Safety Notification  
By registering your product, you'll receive notification -  
directly from the manufacturer - in the rare case of a  
product recall or safety defect.  
*Additional Benefits  
Registering your product guarantees that you'll receive  
all of the privileges to which you're entitled, including  
special money-saving offers.  
Know these safety symbols  
The lightning flash with arrowhead symbol, within an equilateral  
triangle, is intended to alert the user to the presence of  
uninsulated “dangerous voltage” within the apparatus’s enclosure  
that may be of sufficient magnitude to constitute a risk of  
electric shock to persons.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
The exclamation point within an equilateral triangle is intended to  
alert the user to the presence of important operating and  
maintenance (servicing) instructions in the literature accompanying  
the apparatus.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
The caution marking is located on the rear or bottom of the cabinet.  
WARNING:  
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall  
not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the  
apparatus.  
CAUTION:  
ATTENTION  
To prevent electric shock, match wide blade of plug to wide slot, fully insert.  
:
Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la  
prise et pousser jusqu’au fond.  
English  
4
ImportantꢀSafetyꢀInstructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
13. Unplug this apparatus during lightning storms or when unused for  
long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is  
required when the apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged, liquid has been spilled  
or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has  
been dropped.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Note to the CATV system installer:  
8. Do not install near any heat sources such as radiators, heat registers,  
This reminder is provided to call the CATV system installer’s  
attention to Article 820-40 of the NEC that provides guidelines for  
proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close  
to the point of cable entry as practical.  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-  
type plug.A polarized plug has two blades with one wider than the  
other.A grounding type plug has two blades and a third grounding  
prong.The wide blade or the third prong are provided for your  
safety. If the provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
Example of Antenna Grounding as per NEC − National  
Electric Code  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with the  
apparatus.When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury  
from tip-over.  
ANTENNA DISCHARGE  
UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRIC SERVICE  
ELECTRODE SYSTEM  
EQUIPMENT  
(NEC ART 250, PART H)  
P&F USA is not liable for these types of accidents or injury noted  
below.  
Wall Mount Bracket Kit  
Brand:SANUS  
Modelꢀ#  
Screwꢀdimension  
Install the Wall Mount Bracket on a sturdy vertical wall.  
If installed onto a ceiling or slanted wall, theTV and Wall Mount  
Bracket may fall which could result in a severe injury.  
22PFL4907  
SAN10b  
M4 x 0.472” (12mm)  
For 26 inch TVs, screws w/washers are required. (sold separately)  
Do not use screws that are longer or shorter than their  
specified length. If screws too long are used this may cause  
mechanical or electrical damage inside theTV set. If screws too  
short are used this may cause theTV set to fall.  
M4 x 0.472” (12mm)  
26PFL4907  
SAN213b  
+
Washer 0.039” (T1mm)  
Do not fasten the screws by excessive force.This may damage  
the product or cause the product to fall, leading to an injury.  
For safety reasons use 2 people to mount theTV onto a Wall  
Mounting Bracket.  
Do not mount theTV onto the Wall Mounting Bracket while  
yourTV is plugged in orTurned On. It may result in an electrical  
shock injury.  
DoꢀNOTꢀuseꢀscrewsꢀ  
packedꢀwithWallꢀMountꢀBracketꢀKit  
For 32 inch TVs, you need to purchase screws  
separately with dimensions described below.  
32PFL4907  
VM200s  
M4 x 0.472” (12mm)  
When installing the unit on the wall, allow this much space.  
The recommended Wall Mount Bracket Kit (sold separately)  
allows the mounting of theTV on the wall.  
For detailed information on installing the wall mount, refer to  
the Wall Mount Instruction Book.  
P&F USA is not responsible for any damage to the product or  
injury to yourself or others if you elect to install theTV Wall  
Mount Bracket or mount theTV onto the Bracket on your own.  
Top:  
11.8 inches (30cm)  
5.9 inches (15cm)  
3.9 inches (10cm)  
Left and right side:  
Bottom:  
The Wall Mount Bracket must be installed by experts.  
English  
5
Modifications  
1 Notice  
This apparatus may generate or use radio frequency energy. Changes or  
modifications to this apparatus may cause harmful interference  
Trademarks are the property of Koninklijke Philips Electronics N.V. or  
their respective owners.  
unless the modifications are expressly approved in the User Manual.  
The user could lose the authority to operate this apparatus if an  
unauthorized change or modification is made.  
P&F USA reserves the right to change products at any time without  
being obliged to adjust earlier supplies accordingly.  
Cables  
The material in this User Manual is believed adequate for the intended  
use of the system. If the product or its individual modules or procedures  
are used for purposes other than those specified herein, confirmation  
of their validity and suitability must be obtained. P&F USA warrants  
that the material itself does not infringe any United States patents. No  
further warranty is expressed or implied.  
Connections to this device must be made with shielded cables with  
metallic RFI/EMI connector hoods to maintain compliance with FCC  
Rules and Regulations.  
Canadian notice  
This Class B Digital apparatus complies with Canadian ICES-003.  
Standard Television Receiving Apparatus, Canada BETS-7/NTMR-7.  
P&F USA cannot be held responsible neither for any errors in the  
content of this document nor for any problems as a result of the  
content in this document. Errors reported to P&F USA will be adapted  
and published on the P&F USA support website as soon as possible.  
TheꢀfollowingꢀFCC/ICꢀRSS-GenꢀisꢀdescriptionꢀofꢀUSBꢀ  
WirelessꢀLANꢀadapter.  
Pixel characteristics  
FCC Caution:Any changes or modifications not expressly approved  
by the party responsible for compliance could void the user’s  
authority to operate this equipment.  
This transmitter must not be co-located or operating in conjunction  
with any other antenna or transmitter.  
This LCD product has a high number of color pixels.Although it has  
effective pixels of 99.999% or more, black dots or bright points of light  
(red, green or blue) may appear constantly on the screen.This is a  
structural property of the display (within common industry standards)  
and is not a malfunction.  
Country Code Statement  
For product available in the USA market, only channel 1~11 can be  
operated. Selection of other channels is not possible.  
To maintain compliance with FCC RF exposure requirements, use  
only belt-clips, holsters or similar accessories that do not contain  
metallic components in its assembly.The use of accessories that do  
not satisfy these requirements may not comply with FCC RF exposure  
requirements and should be avoided.  
Warranty  
No components are user serviceable. Do not open or remove covers  
to the inside of the product. Repairs may only be done by Service  
Centers and official repair shops. Failure to do so shall void any  
warranty, stated or implied.  
Any operation expressly prohibited in this User Manual, any adjustments  
or assembly procedures not recommended or authorized in this User  
Manual shall void the warranty.  
FCC Radiation Exposure Statement  
This equipment is compliance with SAR for general population/  
uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been  
tested in accordance with the measurement methods and procedures  
specified in OET Bulletin 65 Supplement C.This equipment should  
be installed and operated with minimum distance 2.5cm between the  
radiator & your body.  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits  
for a Class B Digital device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against  
harmful interference in a residential installation.This equipment  
generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television  
reception, which can be determined by Turning the equipment Off and  
On, the user is encouraged to try to correct the interference by one  
or more of the following measures:  
This device complies with Industry Canada license-exempt RSS  
standard(s). Operation is subject to the following two conditions: (1)  
this device may not cause interference and (2) this device must accept  
any interference, including interference that may cause undesired  
operation of the device.  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
Consult the dealer or an experienced radio or television technician  
for help.  
Declaration of Conformity  
Trade Name:  
PHILIPS  
Responsible Party: P&F USA, Inc.  
Model:  
32PFL4907, 26PFL4907, 22PFL4907  
Address:  
PO Box 2248,Alpharetta, GA 30023-2248  
U.S.A.  
Telephone Number: 1 866 309 0843  
English  
6
Copyright  
Twitter is a trademark of Twitter, Inc.  
All other registered and unregistered trademarks are the property of  
their respective owners.  
The terms HDMI and HDMI High-  
Definition Multimedia Interface, and  
the HDMI Logo are trademarks  
or registered trademarks of HDMI  
Licensing LLC in the United States and  
other countries.  
vTuner is a trademark of Nothing Else  
Matters Software, Ltd.  
Portions of this software are copyright ©The FreeType Project  
Manufactured under license from  
Dolby Laboratories. Dolby and the  
double-D symbol are trademarks of  
Dolby Laboratories.  
The American Academy of Pediatrics discourages television viewing for  
children younger than two years of age.  
is a trademark of SRS Labs, Inc.  
TruSurround XT technology is  
incorporated under license from SRS  
Labs, Inc.  
SRSTruSurround XT® creates a truly  
immersive surround sound experience  
with rich bass and clear dialog from  
only two speakers.  
ENERGY STAR® is a joint program  
of the U.S. Environmental Protection  
Agency and the U.S. Department of  
Energy helping us all save money and  
protect the environment through  
energy efficient products and practices.  
Consumer Notice:  
ThisTV has been set to maximize energy efficiency while delivering the  
best possible picture using the factory installed home mode settings.  
Changing or enabling other features in thisTV (e.g. brightened  
backlighting) will possibly increase energy consumption beyond the  
original ENERGY STAR® qualified limits.  
DLNA®, the DLNA Logo and DLNA  
CERTIFIED® are trademarks, service  
marks, or certification marks of the  
Digital Living Network Alliance.  
Netflix and the Netflix logo are  
trademarks or registered trademarks  
of Netflix, Inc.  
Film Fresh and the Film Fresh logo are  
registered trademarks of Film Fresh Inc.  
VUDUTM is a trademark of VUDU, Inc.  
YouTube and theYouTube logo are  
trademarks of Google Inc.  
CloudTV™ (CloudTV™ by  
ActiveVideo®) technology provided  
under license from ActiveVideo  
Networks, Inc. U.S. and Foreign Patents  
apply. CloudTV™ and theCloudTV™”  
logo are proprietary trademarks of  
ActiveVideo Networks, Inc.  
PANDORA, the PANDORA logo,  
and the Pandora trade dress are  
trademarks or registered trademarks  
of Pandora Media, Inc. Used with  
permission.  
English  
7
2 Important  
Environmental care  
Positioning theTV  
Large screenTVs are heavy. 2 people are required to carry and  
handle a large screenTV.  
Make sure to hold the upper and bottom  
frames of the unit firmly as illustrated.  
Install the unit in a horizontal and stable  
position.  
Do not install the unit in direct sunlight  
or in a place subject to dust or strong  
vibration.  
The packaging of this product is intended to be recycled.  
Contact your local authorities for information about how to recycle the  
packaging.  
For product recycling information, please visit - www.recycle.philips.com  
End of life directives  
Depending on the environment, the temperature of this unit may  
increase slightly.This is not a malfunction.  
Avoid a place with drastic temperature changes.  
Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the  
picture and/or sound may be generated if the unit is placed too  
close to them. In this case, please ensure enough space between  
the external devices and the unit.  
Do not insert the AC power cord into the power socket outlet  
before all the connections are made.  
Ensure that you always have easy access to the AC power cord or  
plug to disconnect theTV from the power.  
Before you move theTV, disconnect attached cables to prevent  
damage to connectors.  
Philips pays a lot of attention to produce environment-friendly products  
in green focal areas.Your newTV contains materials which can be  
recycled and reused.At the end of its life, specialized companies can  
dismantle the discardedTV to concentrate the reusable materials and to  
minimize the amount of materials to be disposed of. Please ensure you  
dispose of your oldTV according to local regulations.  
Disposal of used batteries  
The batteries supplied do not contain the heavy metals mercury and  
cadmium. Nevertheless, in many areas batteries may not be disposed  
of with your household waste. Please ensure you dispose of batteries  
according to local regulations.  
Be sure to unplug the AC power cord from the AC outlet before  
moving or carrying the unit.  
Regulatory notices  
Do not place the unit on the furniture that is capable of being tilted  
by a child and an adult leaning, pulling, standing or climbing on it.  
A falling unit can cause serious injury or even death.  
This apparatus should not be placed in a built-in installation such as a  
bookcase or rack unless proper ventilation is provided.  
Make sure to leave a space of 4 inches (10cm) or more around this  
apparatus.  
Press to Turn the unit On and go into Standby mode.  
To completely Turn Off the unit, you must unplug the AC power cord.  
Disconnect the AC plug to shut the unit off when trouble is found or  
not in use.The AC plug shall remain readily available.  
Never use a gas duster on this TV.  
The gas trapped inside of this unit may cause ignition and explosion.  
CAUTION: Danger of explosion if battery is incorrectly replaced.  
Replace only with the same or equivalent type.  
WARNING: Batteries (battery pack or battery installed) shall not be  
exposed to excessive heat such as sunshine, fire or the  
like.  
WARNING: To prevent injury, this apparatus must be securely  
attached to the furniture/wall in accordance with the  
instructions.Tipping, shaking, or rocking the unit may  
cause injury/death.  
 
English  
8
3 Get started  
Supplied accessories  
User Manual  
Quick Start guide  
Registration card  
IMPORTANT  
Features  
Quick  
DTV/TV/CATV  
Start  
You can use your remote control to select channels which are broadcast in  
Digital format and conventional Analog format.Also, cable subscribers can  
access their cableTV channels.  
Box-inserts  
Information display  
You can display the title, contents and other information of the current  
program on theTV screen.  
AutoProgram  
This unit automatically scans and memorizes channels available in your area,  
eliminating difficult setup procedures.  
Remote Control and  
batteries (AAA, 1.5V x 2)  
TV base and screws  
Net TV  
This unit lets you enjoy Internet services. Use the remote control to  
browse the NetTV pages.You can play movies and much more, all  
from yourTV screen.  
Screws packed with this unit:  
Model  
Quantity  
Size  
Child lock  
32PFL4907  
26PFL4907  
22PFL4907  
3
2
This feature allows you to block children’s access to inappropriate  
programs.  
M4 x 14  
Closed Caption decoder  
Built-in Closed Caption decoder displays text for Closed Caption  
supported programs.  
MTS/SAP tuner  
Cable management tie  
USB wireless LAN  
adapter  
Audio can be selected from the remote control.  
Auto Standby  
If there is no Input signal and no operation for 15 minutes, the unit will go  
into Standby mode automatically.  
Sleep timer  
You can set the unit to go into Standby mode after a specific amount of  
time.  
Note  
Choices for on-screen language  
Select your on-screen language: English, Spanish or French.  
If you lose the screws, please purchase the above-mentioned Phillips head screws at  
your local store.  
If you need to replace these accessories, please refer to the part name or No. with the  
illustrations and call our toll free customer support line found on the cover of this User  
Manual.  
Stereo sound function  
PLL frequency synthesized tuning  
Provides free and easy channel selection and lets you tune directly to any  
channel using the number and decimal point “•” buttons on the remote  
control.  
When using a universal remote control to operate this unit.  
Make sure the component code on your universal remote control is set to our brand.  
Refer to the instruction book accompanying your remote control for more details.  
Various adjustment for picture and sound  
Customizes image quality suitable for your room and sets your sound  
preference.  
We do not guarantee 100% interoperability with all universal remote controls.  
EasyLink via HDMI link  
EasyLink allows your other HDMI link devices to be controlled by the  
HDMI cable connected to yourTV.  
Symbols used in this User Manual  
The following is the description for the symbols used in this User  
Manual. Description refers to:  
HDMI Input  
HDMI-DVI Input  
If your video device has DVI Output jack, use an HDMI-DVI conversion  
cable to connect the unit.  
DigitalTVꢀoperation  
ComponentVideo Input  
PC Input  
AV Input  
Analog/CableTVꢀoperation  
If neither symbol appears, the operation is applicable to both.  
USB terminal  
The picture (JPEG), music (MP3) and video (MPEG) files stored on a USB  
Memory Stick can be played back on this unit.  
Digital Audio Output  
Headphone Audio Output  
 
English  
9
Attaching the base  
Managing cables  
You must attach the base to the unit to have it as a table top unit.  
Be sure the front and rear of the base match the proper direction.  
For large screenTVs, at least 2 people are required for these steps.  
Route your antenna cable and all other cables through the cable  
management tie at the back of theTV.  
The holder helps keep your cables tidy and easily manageable.  
1
1 Attach the cable management tie as illustrated below.  
1
2
1
2
2
2 Pass cables through the cable management tie to avoid tangles.  
32"/26"  
x
x
3
2
22"  
Note  
Make sure to use a table which can support the weight of this unit and is larger than  
this unit.  
Make sure the table is in a stable location.  
When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of  
the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.  
When attaching the base, ensure that all screws are tightly fastened. If the base is not  
properly attached, it could cause the unit to fall, resulting in injuries as well as damage  
to the unit.  
To remove the base from this unit, unscrew the Phillips head screws in step 2.  
Be careful not to drop the base when you remove it.  
Installing the remote control batteries  
1 Slide the battery cover off the back of the remote control.  
2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and −  
ends of the batteries line up with the markings inside the case.  
3 Slide the cover back into position.  
Note  
Remove the batteries if not using the remote control for an extended period of time.  
 
English  
10  
a
b
(POWER-ON/STANDBY-ON)  
Press toTurn the unit On and go into Standby mode.  
To completelyTurn Off the unit, you must unplug the AC power  
cord.  
FAV  
Displays a list of all channels marked as favorite.  
(Includes subchannels)  
SLEEP  
Press to activate the sleep timer.  
COLOR buttons (green/yellow)  
Functionally useful for Net service.  
VUDU and COLOR button (blue)  
Starts upVUDU and functionally useful for Net service.  
SOURCE  
Toggles to select connected devices.  
NET TV  
Displays the NetTV menu.  
OK  
Press to decide the command of setting when the Home menu is  
displayed.  
▲▼◄► (NAVIGATION buttons)  
Press to move left/right/up/down through the items.  
INFO  
Displays information about theTV channel or accessory device.  
EasyLink buttons  
Functionally useful for EasyLink, Net service and DLNA.  
Remote control function  
a
t
s
b
c
d
c
d
e
f
g
h
r
e
f
q
g
h
i
p
o
j
k
i
j
k
n
m
l
Press to search backward or forward through the disc.  
Press to start, pause or resume playback.  
Press to stop the disc playback.  
E /D  
Æ∆  
C
Press to start or stop video recording.  
I
l
0−9 (NUMBER buttons)  
Press to select channels.  
• (DOT)  
Press to shift the subchannel from the main  
channel.  
PREV.CH  
CH+/−  
Press to return to the previously viewed channel.  
Press to select channels.  
m
n
o
p
q
r
s
t
FORMAT  
Selects a picture format.  
VOL +/−  
Press to adjust the volume.  
MUTE  
Press toTurn the sound On and Off.  
BACK  
Press to return to the previous menu operation.  
MENU/E�IT  
Press to display the Home menu.  
NETFLI� and COLOR button (red)  
Starts up NETFLIX and functionally useful for Net service.  
AUTO MODE  
Cycles through preset picture and sound settings.  
OPTIONS  
Displays a list of menu items applicable to the highlighted object  
or screen.  
 
English  
11  
a
VOL ◄/►  
Control panel  
Touch to adjust volume down (◄)/up (►) or to move left  
(◄)/right (►) when selecting menu items.  
b
c
d
MENU  
Touch to display the Home menu.  
SOURCE  
Touch to select the connected devices.  
CH ▲/▼  
Touch to select channels or to move up (▲)/ down (▼) when  
selecting menu items  
e
(POWER-ON/STANDBY-ON)  
Touch toTurn the unit On and go into Standby mode.  
To completelyTurn Off the unit, you must unplug the AC power  
cord.  
a
b
c
d
e
f
g
Power On indicator  
Lights up white when the unit isTurned On and flashes while the  
unit isTurning On.  
Infrared sensor  
Receives IR signals from remote control.  
g
f
h
i
Ethernet port  
Terminals  
For Internet connection using an Ethernet cable with an RJ-45  
connector.  
Digital Audio Output jack  
Digital Audio (S/PDIF) Output to home theaters and other Digital  
Audio systems.  
j
k
PC Input jack  
VGA cable connection for PC.  
Component(Y/Pb/Pr)/CompositeVideo(VIDEO) Input jacks  
forVIDEO  
CompositeVideo Input (VIDEO) jack is shared jack with  
n
o
ComponentVideo Input (Y) jack.  
l
m
Analog Audio (L/R) Input jacks  
Connects Analog Audio signals from;  
– HDMI-DVI / Analog Audio (L/R) jacks signal.  
– ComponentVideo / Analog Audio (L/R) jacks signal.  
– CompositeVideo / Analog Audio (L/R) jacks signal.  
– PC Connection / Analog Audio (L/R) jacks signal with Stereo  
mini 3.5mm plug Audio cable on PC.  
h
i
j
k
l
m
HDMI Input jacks  
Digital Audio and video Input from high definition Digital devices  
such as Blu-ray disc players, cable boxes and satellite set-top  
boxes.  
p
q
For HDMI 1 only  
In addition to normal HDMI and HDMI-DVI functionality, it  
outputsTV Audio to an HDMI-ARC-compliant device, such as a  
home theater system.  
n
o
USB wireless network terminal  
Connects the supplied USB wireless LAN adapter.  
USB terminal  
Data Input from USB Memory Stick only.  
Do not connect any device to this terminal such as; Digital  
camera, keyboard, mouse, etc.  
p
q
75 ohm Cable/Antenna connection  
Signal Input from an antenna, cable or satellite.  
Headphone Audio Output jack  
Headphone 3.5mm stereo jack for personal listening.  
 
English  
12  
Connecting a set-top box, Blu-ray/DVD recorder via  
composite connectors and Analog Audio  
Connecting the antenna or the cable  
Be sure your antenna or other device is connected properly before  
plugging in the AC power cord.  
Do not place your recorder too close to the screen because some  
recorders can be susceptible to signals.  
If you connect to an antenna through RF cable  
Any DTV programs that are broadcasted in your area can be received  
for free through an antenna connection.  
cable  
OUT  
set-top box  
RF cable  
IN  
cable  
RF cable  
OUT  
OUT  
IINN  
Audio (L/R) +  
Video cables  
IN  
antenna  
OUT  
OUT  
IN  
RF cable  
Audio (L/R) +Video cables  
IN  
Blu-ray disc/DVD recorder  
If you connect a set-top box through RF cable  
If theTV is connected to a cable box or satellite set-top box via a  
coaxial connection, set theTV to channel 3, 4 or the channel specified  
by the service provider.  
Note  
If you have any question about the DTV’s antenna, visit www.antennaweb.org for further  
information.  
Depending on your antenna system, you may need different types of combiners  
(mixers) or separators (splitters) for HDTV signal.The minimum RF bandpass on these  
devices is 2,000MHz or 2GHz.  
For your safety and to avoid damage to this unit, please unplug the RF coaxial cable  
from the antenna Input jack before moving the unit.  
If you did use an antenna to receive AnalogTV, it should also work for DTV reception.  
Outdoor or attic antennas will be more effective than a set-top box or inside antenna.  
ToTurn On your reception source easily between antenna and cable, install an antenna  
selector.  
RF cable  
IN  
antenna  
OUT  
If you are not receiving a signal from your cable service, contact the Cable provider.  
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to  
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.  
set-top box  
RF cable  
IN  
Plugging in the AC power cord  
Make sure that the AC power cord must be plugged to an AC outlet  
after all the necessary connections are made.  
If you connect a set-top box through HDMI  
If theTV is connected to a cable box or satellite set-top box via HDMI,  
make sure you select the correct Source by using SOURCE.  
Caution  
Do not connect the AC power cord to a power supply outside the indicated voltage of  
this unit (AC 120V).  
Connecting the AC power cord to a power supply outside of this range may result in  
fire or electrical shocks.  
RF cable  
IN  
IN  
OUT  
Note  
HDMI cable  
Each time you plug in the AC power cord, no operations will be performed for a few  
seconds.This is not a malfunction.  
set-top box  
If you connect a set-top box through ComponentVideo Input  
If theTV is connected to a cable box or satellite set-top box via  
ComponentVideo Input, make sure you select the correct Component  
Video Source by using SOURCE.  
RF cable  
OUT  
Audio (L/R) cables  
IN  
IN  
OUT  
set-top box  
IN  
Component (Y/Pb/Pr)Video cables  
 
English  
13  
System searching. Please wait...  
These operations are accessible by remote control.  
Some may also be accessible by control panel on the main unit.  
Digital channels found:  
Analog channels found:  
0
0
Initial setup  
Auto programming may take more than 20 minutes to  
complete. Digital channels will take longer than Analog  
to find and program. Please wait until you see  
the Auto Programming complete message.  
This section will guide you through the unit’s initial setting which  
includes selecting a language for your on-screen menu, country, location  
and AutoProgram, which automatically scans and memorizes viewable  
channels.You can also set the network connection in this setting.  
Stop  
Before you begin:  
Make sure the unit is connected to antenna or cable.  
5 After the channel installation is completed, Network setup screen  
1 After making all the necessary connections, press toTurn On the  
will appear. Use ▲▼ to select Wireless or Wired, then press OK.  
unit.  
• It may take a few moments toTurn On the unit for the first time.  
• Initial setup menu appears automatically after the unit isTurned  
On.  
This TV can be connected to  
your home network.  
Select your connection type.  
Wireless  
Wired  
2 Use ▲▼ to select the on-screen language, country, location on the  
right side of theTV screen, then press OK.  
You must set Home in location setting. Otherwise, Picture and  
Sound settings you adjusted will not be memorized after the unit  
goes into Standby mode.  
3 Use ▲▼ to select the signal type.  
• If theTV is connect to a cable box or satellite set-top box, select  
the 2nd one and skip to step 5.  
Skip  
To set up a TV signal from a cable TV  
wall jack or a standard TV antenna.  
Select  
If you have a router with WPS function, select  
Wireless  
Wired  
Wireless to connect to the Internet.  
If you connect with an Ethernet cable, select  
Wired to connect to the Internet.  
• If you select Wireless, use ▲▼ to select Easy Connect and  
press OK.  
To set up a TV signal from a cable TV  
box or satellite TV receiver.  
Select  
6 Follow the on-screen instructions to complete the installation.  
• When you select On in the selection screen of  
Auto software update.A message will appear if there is the  
latest software on the network server.  
4 Use ▲▼ to select Antenna forTV channels or Cable for CATV  
7 Use ◄► to select Start, then press OK to begin Settings assistant.  
channels, then press OK.  
Settings assistant will allow you to customize your picture settings to your  
personal preference.You will see a series of test pictures where  
the right side and left side differ. Select the side that is most pleasing to  
you with the Left/ Right buttons.  
Make sure that you have  
Antenna  
Cable  
Skip  
attached your antenna or cable  
signal into the jack on the back  
of your TV labeled “ANTENNA. IN”.  
Cancel  
Start  
Now select either Antenna or  
Cable, using up/down key of the  
remote control. Once you have  
made you selection, press the  
OK button to proceed.  
8 Press ◄ or ► 5 times to select the side of the pictures that is the  
most pleasing to you, then press OK.  
– When Antenna is selected, theTV detects antenna signals. It searches  
for DTV and AnalogTV channels available in your area.  
– When Cable is selected, theTV detects signals supplied by cable. It  
searches for DTV, AnalogTV and Cable channels available in your  
area.  
Which side of the picture do you prefer?  
Autoprogram will begin.  
Cancel  
Picture A  
Picture B  
Continued on next page.  
 
English  
14  
9 Press OK to finish Settings assistant.  
Store your preferences.  
Cancel  
Store  
Network updates will appear after Connection test succeeds.  
Use ◄► to select Yes, then press OK.  
• When the initial setup is completed, the lowest memorized  
channel with the confirmation message of the location setting  
will be displayed on theTV screen.  
Note  
If you are not receiving a signal from your cable service, contact the Cable provider.  
If you press during AutoProgram, this setup ofTV channels will be canceled.  
The initial AutoProgram function can be executed for either Antenna or Cable only  
once.When you change the connection (Antenna/Cable), set Autoprogram again.  
After an initial setup is completed...  
• If you want to scan the channels automatically again.  
Autoprogram  
You can add the desired cable and Analog channels  
unmemorized by AutoProgram.  
Weak channel installation  
• If you want to change to another language.  
Language  
• If you want to change the country setting.  
Country  
• If you want to change the location setting.  
Location  
• If you want to change the network setting.  
Network  
• If you want to restore the picture setting.  
Settings assistant  
English  
15  
4 Use yourTV  
Switching channels  
Switching on yourTV and putting it in  
Standby mode  
To Turn Power On or to Turn Standby On  
.
Touch or press  
on the front panel or the remote control.  
Note  
Energy consumption contributes to air and water pollution.When the AC power  
cord is plugged in, yourTV consumes energy.YourTV has very low Standby power  
consumption.  
To select Channels by using CH ▲/▼ or CH+/−  
Touch CH ▲(up)/(down) on the front panel or press CH+/−  
on the remote control.  
Adjusting volume  
To select Channels by using the NUMBER buttons  
DigitalTVꢀoperation  
For Digital channels, press a number followed by a dot “•” and the  
corresponding sub channel number.  
– When selecting Digital channel 11.1  
Be sure to press • before entering the subchannel number.  
Analog/CableTVꢀoperation  
– When selecting cable or Analog channel 11  
Press PREV.CH to return to the previously viewed channel.  
To increase or decrease volume  
Note  
Touch VOL ◄(down)/(up) on the front panel or press  
VOL +/− on the remote control.  
To mute or unmute sound  
To select the non-memorized channels, use the NUMBER buttons.  
Channel not available or No Signal will appear on theTV screen after the subchannel  
broadcast is over.  
Press MUTE on the remote control to mute the sound.  
Press MUTE again or VOL +/− to recover the original sound.  
Audio only message will appear on theTV screen, when you receive only sound signal.  
   
English  
16  
Note  
Watching channels from an external device  
Switching Each Input Mode can easily switch with the remote control  
betweenTV (DTV or AnalogTV) and external devices when they are  
connected to the unit.  
After selecting Add new devices, follow the on-screen instructions to select the correct  
device and connector.  
Lock or unlock your device from the Home menu  
1 Turn On a set-top box or the connected device.  
This section describes how to lock or unlock specified device.  
• The picture from your set-top box or the connected device  
might appear automatically on theTV screen.  
1 Press MENU/E�IT on the remote control.  
2 Use ▲▼◄► to select a device to lock or unlock.  
3 Press OPTIONS on the remote control.  
If the picture does not appear  
4 Use ▲▼ to select Device lock or Device unlock, then press OK.  
• If device lock is unlocked, Device lock will be displayed. If device  
lock is locked, Device unlock will be displayed and will be  
displayed at the top right of the device icons.  
5 Enter your PIN. Change PIN p.36  
Press SOURCE repeatedly to select the set-top box or the  
• Once you have set PIN, PIN input menu does not appear after  
the unit isTurned on.  
connected device and wait a few seconds till the picture appears.  
e.g.)  
TV  
11.1  
DTV/TV channel  
HDMI 1  
HDMI 2  
HDMI 3  
HDMI 1  
HDMI 2  
HDMI 3  
Video  
Enable or disable RC key forwarding from the Home  
menu  
Video  
or  
Component  
This section describes how to enable or disable RC key forwarding for  
a particular device.  
PC  
PC  
1 Press MENU/E�IT on the remote control.  
• Pressing ▲ reverses the direction of the Input modes.  
2 Use ▲▼◄► to select a device to enable or disable RC key  
2 Use the remote control of the set-top box or the connected device  
forwarding.  
to select channels.  
3 Press OPTIONS on the remote control.  
4 Use ▲▼ to select Enable RC key forwarding or  
Access the Home menu  
Disable RC key forwarding, then press OK.  
• If RC key forwarding is set to off, Enable RC key forwarding  
will be displayed. If RC key forwarding is set to on,  
Disable RC key forwarding will be displayed and will be  
displayed at the top left of the device icons.  
1 Press MENU/E�IT.  
Note  
This function is available only when your devices are connected to this unit  
through HDMI cables and assigned to an HDMI port (HDMI 1 to HDMI 3) with  
Add new devices in the Home menu.  
Guide to Home menu  
d
a
e
Watch TV  
Net TV  
Browse USB  
Browse PC  
Setup  
b
c
f
Add new devices  
Switches back to the antenna source if  
another source is selected.  
a WatchTV  
:
Accesses NetTV menus.  
b NetTV  
:
:
:
:
:
Adds new devices to the Home menu.  
Accesses USB menus.  
c Add new devices  
d Browse USB  
e Browse PC  
f Setup  
Accesses DLNA menus.  
Accesses menus that allow you to  
change picture, sound and otherTV  
settings.  
   
English  
17  
PhilipsWireless MediaConnect  
View photos, play music and watch videos  
using DLNA  
(Available for 32PFL4907 & 26PFL4907only)  
You can enjoy yourTV as a PC monitor wirelessly using your home  
network. Make sure you download the Philips Wireless MediaConnect  
software and install it on your PC before you perform the steps below.  
On yourTV you can play video, music and photo files stored on DLNA  
certified home media servers connected to your home network. In  
order to use this feature, you must connect this unit to the Internet.  
It is recommended that files to be played back in this unit are recorded  
under the following specifications:  
Install PhilipsWireless MediaConnect  
<MP3>  
1 Display Setup using Home menu and use ▲▼ to select Software,  
Sampling frequency  
Constant bit rate  
: 32kHz or 44.1kHz or 48kHz  
: 32kbps - 320kbps  
then press OK.  
2 Use ▲▼ to select MediaConnect code, then press OK.  
<JPEG>  
• Write down the 12-digit code displayed on the screen.You will  
need this to download MediaConnect software.  
Upper limit  
: 16Mpixel  
<MPEG>  
3 Start your Internet browser on your PC and open  
the Philips Wireless MediaConnect download page at  
Playable codec  
Maximum size of a video : 1920x1080  
Audio type  
: MPEG1, MPEG2  
:AC3, MPEG1 audio layer 3 (MP3),  
MPEG1 audio layer 2, LPCM  
On the website, you can check the necessary PC system  
requirements.  
Note  
4 Enter the 12 digit code you wrote at step 2.  
A maximum of 1,023 folders or files can be recognized.  
For the home server list, maximum of 16 servers can be displayed.  
The 10th and deeper hierarchies cannot be displayed.  
Unplayable files in the home server will not be displayed in the file list.  
For some files, playback is not available even if displayed in the file list.  
In order to play back the contents in home servers, the player and the servers must be  
connected to the same access point.  
5 Click the “Download now” button to download the free  
Philips Wireless MediaConnect software.  
6 Once downloaded, start the file “Philips Wireless MediaConnect_  
setup.exe”. Follow the instructions on the screen to complete  
software installation.  
Compatibility and available playback function may differ depending on the home server.  
Video files with unsupported audio format will be skipped.  
The quality of the playback picture or audio differs depending on your network condition.  
Using PhilipsWireless MediaConnect  
1 Launch Philips Wireless MediaConnect on your PC first.  
Before using DLNA  
• Select “Start projecting” with right click on the  
system tray.  
in the  
Follow the procedure below before using DLNA.  
1 Connect this unit to the Internet.  
• The start up screen for Philips Wireless MediaConnect will  
be displayed and the unit searches for an available PC that is  
running Philips Wireless MediaConnect software.  
Once connected, the Philips Wireless MediaConnect software will  
encode and stream the screen of your PC as a video along with audio.  
• Broadband Internet connection of 8Mbps or faster is required.  
Depending on your computer and network configuration, there will be  
a delay between your PC screen and theTV but the audio-video will  
always be in sync.  
2 Set up the necessary network connection settings. Network p.40  
Using DLNA  
PhilipsWirelessꢀMediaConnectꢀHelp  
To read the Philips Wireless MediaConnect Help, right click the program  
icon in the notification tray of the PC and select Help.  
1 Start DLNA home media servers in your home network.  
• For details, refer to the instruction book of the DLNA certified  
device.  
Specifics  
2 Press MENU/E�IT on the remote control.  
You can project high definition (HD) or standard definition (SD) video,  
depending on the processing power of your PC. For smooth playback  
of HD video, please use a hardware accelerated video player on your  
computer.A hardware accelerated video player uses the graphics  
adapter of your PC to render HD video rather than the processor.  
This frees up the processor for Philips Wireless MediaConnect video  
encoding.The content protection on most Blu-ray or DVD disc  
movies might restrict watching the movie onTV when the disc is  
playing on a PC.TheTV shows PC media files with a small delay.  
Philips Wireless MediaConnect is only available for PC.  
3 Use ▲▼◄► to select Browse PC.  
• This unit will start loading the home server list.  
4 After loading, home server list will appear. Select a home server you  
want to access, then press OK.  
PCꢀrequirements  
Windows XP,WindowsVista,Windows 7,  
Mac OS X 10.5 or above (PC only)  
Minimum PC requirements  
Intel® Core™ 2 Duo 1.8GHz  
512MB RAM  
IEEE 802.11n  
Recommended PC requirements  
Intel® Core™ 2 Duo 2.1GHz  
1GB RAM  
 
English  
18  
Guide to DLNA  
Listen to music using DLNA  
b
c
1 Press ▲▼ to select a file or a folder.  
Æ∆  
2 Press OK or  
to play the selected files.  
Server1  
Audio  
Photos  
Video  
Folder  
Æ∆  
Æ∆  
again to resume.  
• Press OK or  
to pause, press OK or  
a
Server2  
Server3  
d
e
• Press D to skip up the next file.  
• Press E to skip down the previous file.  
• Press C to stop playback.  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
select the desired item.  
Highway Blues  
Video10  
Title:  
Artist:  
Album:  
Duration: 00:05:28  
Year:  
Blue hills  
Off  
On  
Off  
On  
Sets repeat playback to off.  
Repeat  
Shuffle  
Sets repeat playback for all MP3 files in the  
current folder.  
Sets shuffle playback to off.  
a Home server list  
Sets shuffle playback for all MP3 files in the  
current folder.  
b Folder/media icon  
c Group (folder)/le list  
d Image  
The sound will not be output from the unit's  
speakers.  
The sound will be output from the unit's  
speakers.  
You can control audio output from your  
connected EasyLink Compliant Devices with  
VOL +/− by using this unit's remote control.  
Off  
On  
TV speakers  
Note  
e Current file info  
Speakers  
EasyLink  
View your pictures using DLNA  
1 Press ▲▼ to select a file or a folder.  
Master EasyLink must be activated in the Preferences menu to make the  
TV speakers menu available when you select On or Speakers EasyLink.  
Æ∆  
2 Press OK or  
to start a Slide show of the files.  
Æ∆  
• Press OK or  
to pause the Slide show.  
The F icon appears.  
• Press E or D to move between images.  
Watch videos using DLNA  
• Press BACK or C to stop the Slide show.  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
select the desired item.  
1 Press ▲▼ to select a file or a folder.  
Æ∆  
2 Press OK or  
to play the selected files.  
Æ∆  
Æ∆  
again to resume.  
• Press OK or  
to pause, press OK or  
Short  
Medium  
Long  
Switches to the next image in 5 seconds.  
Switches to the next image in 10 seconds.  
Switches to the next image in 15 seconds.  
No effect when switching images.  
• Press D to fast-forward search.  
• Press E to fast-backward search.  
• Press C to stop playback.  
Slide time *1  
Æ∆  
Press  
to resume from the point at which playback was  
stopped. Press OK to play from the beginning of the file at  
which playback was stopped.  
• Press CH+ to play the next file.  
• Press CHto play the current file at the beginning.  
Press CHtwice within 5 seconds to play the previous file.  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
None  
Dissolve  
Wipe right  
Wipe left  
Wipe up  
Wipe down  
Box in  
Box out  
0
Overlaps a next image on a current image.  
Pushes a current image out from left.  
Pushes a current image out from right.  
Pushes a current image out from bottom.  
Pushes a current image out from top.  
A next image comes into the center from out.  
A next image goes to the out from center.  
Displays an image at its original direction.  
Rotates an image clockwise by 90 degrees.  
Rotates an image clockwise 180 degrees.  
Rotates an image clockwise 270 degrees.  
Displays an image at its original size.  
Transitions *1  
select the desired item.  
The sound will not be output from the unit's  
speakers.  
Off  
The sound will be output from the unit's  
speakers.  
On  
TV speakers  
You can control audio output from your  
connected EasyLink Compliant Devices with  
VOL +/− by using this unit's remote control.  
Speakers  
EasyLink  
90  
Note  
Rotate *2  
180  
The resume information will be kept even when the unit isTurned Off.  
If you play another file while the previously viewed file is being resumed, the resume  
information of the previously viewed file will be deleted.  
270  
1x  
Zoom *2  
2x  
Magnifies a current image as twice.  
4x  
Magnifies a current image as fourfold.  
*1 You can set Slide time and Transitions when images are in Slide show.  
*2 You can set Rotate and Zoom when Slide show is in pause mode.  
English  
19  
My Apps functions  
NetTV  
NetTV offers Internet services for yourTV. Use the remote control to  
browse the NetTV pages.You can play movies and much more, all from  
yourTV screen.  
Remove App  
1 Use ▲▼◄► to select the desired App, then press OPTIONS.  
– Because NetTV is an online system, it can be modified over time to  
better serve its purpose.  
– Some NetTV services can be added, changed or stopped after  
some time.  
2 Use ▲▼ to select Remove App, then press OK.  
• The selected App will be removed from My Apps list.  
You cannot download and save files or install plug-ins.  
Move App  
1 Use ▲▼◄► to select the desired App, then press OPTIONS.  
Before Logging in to NetTV  
2 Use ▲▼ to select Move App, then press OK.  
Follow the procedure below before logging in to NetTV.  
• The selected App icon will be smaller.  
3 Use ▲▼◄► to the point you want to place, then press OK.  
1 Connect this unit to the Internet.  
2 Set up the necessary network connection settings. Network p.40  
Guide to App Gallery  
Logging in to NetTV  
All  
App Gallery  
a
b
1 Press NETTV.  
vTuner Video  
Tag Games  
Cloud TV  
Twitter  
Video  
Cloud TV™ POWERD  
• NetTV screen will appear, then use ▲▼◄► to select service  
icon.  
GAMES  
• For the first time only, Philips Terms of Use Internet  
Enabled product screen will appear.After confirming the  
content, use ◄► to select Agree, then press OK.  
Cloud TV™ POWERD  
c
facebook (CloudTV)  
Cloud TV™ POWERD  
Guide to NetTV screen  
List of category menu.  
a Category menu:  
:
:
Displays unregistered Net service icons  
b Icon list  
on My Apps list.  
a
Video  
HD MOVIES  
Cloud TV™ POWERD  
Displays the order of pages.The current  
page will be highlighted.  
c Page guide  
:
GAMES  
e
f
g
App Gallery  
Cloud TV™ POWERD  
Cloud TV™ POWERD  
My Apps  
APP1  
APP2  
1 Press NETTV, then use ▲▼◄► to select App Gallery.  
2 Use ▲▼◄► to select the desired App in My Apps list, then press  
Radio  
Apps  
b
OK.  
movies  
sports  
technology  
c
d
You can also choose from Category menu. Use ▲▼◄► to  
select All, then use ▲▼ OK to select the desired category.  
• If you select Add, the selected App icon will be placed at the  
Terms of use  
Country  
: USA  
end of My Apps list.  
Displays default service icons.  
a Net service icons (fixed):  
• If you select Add and move, the selected App icon will be  
smaller and use ▲▼◄► to the point you want to place, then  
press OK.  
Even if you press BACK to cancel this function, the selected App  
icon will be placed at the end of My Apps list.  
Displays Net service icons you have listed  
in App Gallery.  
b
My Apps list  
:
Selects what country you live.  
Displays a clause of Net service.  
c
d
e
Country  
:
:
:
Terms of use  
App Gallery  
Displays currently available Net service  
icons in your country.  
Information on Network Services  
Displays the order of pages.The current  
page will be highlighted.  
f Page guide  
APP1/APP2  
:
:
For detailed information on 3rd party Internet services, please visit the  
service providers website:  
Displays Net service icons you  
have registered in App Gallery for  
APP1/APP2.  
g
Netflix  
Film Fresh  
VUDU  
Press COLOR buttons (green/yellow)  
to start up APP1/APP2 accordingly.  
CloudTV  
   
English  
20  
4 In the playback screen, use ▲▼ to select the desired episode, then  
Enjoying vTuner  
press OK.  
• After loading, playback of the selected episode will start.  
To stop playback, press C.  
• Episode list can be displayed 5 episodes at one time.To show  
With this unit, you can enjoy video and Internet radio with vTuner via  
the Internet. In order to watching video and listen to Internet radio, you  
must connect this unit to the Internet.  
the previous/next episodes, press COLOR buttons(red/green).  
To enlarge playback screen, press COLOR button(blue).  
Video playback  
Note  
After you set up the network connection, follow the procedure below  
to watch the video.  
Video service may not be fully available with narrowband Internet connection. (e.g.  
56k modem) When watching video, use broadband Internet connection. (For details,  
contact your Internet service provider.)  
Depending on the bit rate of a station or the network environment, it may take a while  
to complete loading the station or playback may not be available.  
The streaming video may be interrupted during playback, when the vTuner server is busy.  
Some stations cannot be displayed in the list, depending on the network environment.  
If the loading time of a station exceeds 3 minutes, the loading will be canceled.  
The order of station/episode in the list depends on the information from vTuner  
server and may change without notice.  
Guide to the player screen  
e.g.) Recommendations  
a
Recommendations Favo Genr Most  
b
Add to Favorites  
NewsNews  
You can add your favorite stations to Favorites in the category tab.To  
add your favorite stations, follow the procedure below.  
1 Follow steps 1 to 2 in Video playback.  
2 Use ▲▼◄► to select the station you want to add to Favorites,  
then press COLOR button(yellow).  
2/3  
Previous  
Next  
Favorite  
c
• The selected station is added to the station list in Favorites.  
• Confirmation message will appear.  
List of category menus  
a Category  
:
• Press COLOR button(yellow) to add your favorite station in  
Favorites while the desired episode is selected in the episode list  
or the episode is being played back.  
Recommendations  
: List of recommendation stations  
: List of your favorite video stations  
: List of stations categorized by genre  
Favorites  
Genre  
3 Press OK.  
Most Popular Podcasts : List of popular podcasts  
Displays station list.  
b Station list  
:
:
Remove from Favorites  
Displays COLOR buttons  
(red/green/yellow/blue) guide.  
c Operation guide  
1 Follow step 1 in Video playback. p.20  
2 Use ◄► to select Favorites in the category tab, then press OK.  
1 Press NETTV on the remote control and then use ▲▼◄► to  
3 Use ▲▼◄► to select the station you want to remove from  
select vTunerVideo.  
Favorites, then press COLOR button(yellow).  
2 Use ◄► to select the desired category, then press OK.  
3 In the player screen, use ▲▼◄► to select the desired station or  
• Confirmation message will appear.  
4 Use ◄► to select Yes, then press OK.  
• The selected station is removed from Favorites.  
genre, then press OK.  
Guide to the playback screen  
a
Reco Favo Genre  
Most  
NEWS NEWS (Video)  
The latest news  
b
c
NEWS NEWS (11.25.10)  
Date  
: Nov /25/ 2010  
NEWS NEWS (11.24.10)  
NEWS NEWS (11.23.10)  
NEWS NEWS (11.22.10)  
Duration : 00:19:24  
f
d
e
NEWS NEWS (11.21.10)  
Previous  
Next  
Favorite  
a Station icon  
b Station name  
c Station information  
d Episode list  
e
COLOR buttons (red/green/yellow/blue) guide  
f Current episode information  
   
English  
21  
Note  
Internet radio playback  
This unit cannot play back stations with audio format other than MP3 and WMA.  
After you set up the network connection, follow the procedure below  
to listen to Internet radio.  
Internet radio service may not be fully available with narrowband Internet connection.  
(e.g. 56k modem) When listening to Internet radio, use broadband Internet connection.  
(For details, contact your Internet service provider.)  
Guide to the playback screen  
e.g.) Location  
Depending on the bit rate of a station or the network environment, it may take a while  
to complete loading the station or playback may not be available.  
The streaming audio may be interrupted during playback, when the vTuner server is busy.  
Some stations cannot be displayed in the list, depending on the network environment.  
If the loading time of a station exceeds 3 minutes, the loading will be canceled.  
a
The order of station/folder in the list depends on the information from vTuner server  
and may change without notice.  
Jazz(3)  
FM 76.2 FM  
Genre  
: Jazz  
Add to favorite list  
Jazz jAzz jaZz jazZ  
f
e
Schonan Beach FM 78.9  
b
c
You can add your favorite stations to Favorites in the category list.To  
add your favorite stations, follow the procedure below.  
d
Location : Japan  
1 Follow steps 1 to 3 in Internet radio playback. p.21  
Language : Japanese  
2 Use ▲▼ to select the station you want to add to Favorites, then  
Favorite  
press COLOR button(yellow).  
• The selected station is added to Favorites folder.  
a Current hierarchy (total number of items)  
• Confirmation message will appear.  
• If you select a folder, use ▲▼ to select the desired station in the  
next hierarchy, then press COLOR button(yellow).  
b Current station information  
(Information will be changed when INFO is pressed)  
c
COLOR buttons (red/green/yellow/blue) guide  
3 Press OK.  
d Station list  
Note  
e Playback status  
f Station icon  
You can also add your favorite stations to Favorites on your PC.To add your favorite  
stations on your PC, visit http://go2service.vtuner.com/pe/ and create a vTuner account  
with the access code, which you can check from the category list. Internet radio  
1 Press NETTV on the remote control and then use ▲▼◄► to  
playback  
select vTuner Radio.  
You can change folder names or order of lists in your vTuner page on the Internet.  
My_Favorite folder will appear after you add a station to Favorites on this unit. (Your  
favorite station will also be added to My_Favorite folder.)  
• Category list will appear.  
2 In the category list, use ▲▼ to select the desired category, then  
press OK.  
Remove from favorite list  
• Station/folder list of selected category will appear.  
• For Location and Genre, use ▲▼ to select the desired location  
or genre after selecting the category, then press OK.  
1 Follow step 1 in Internet radio playback. p.21  
2 Use ▲▼ to select Favorites, then press OK.  
List of stations which are recently played  
List of your favorite radio stations  
Recently Played  
Favorites  
3 Use ▲▼ to select the station you want to remove from Favorites,  
then press COLOR button(yellow).  
List of stations which are added on vTuner  
website (This category will appear only  
after you add stations on vTuner website. )  
• Confirmation message will appear.  
My Added Stations  
4 Use ◄► to select Yes, then press OK.  
• The selected station is removed from Favorites folder.  
List of stations categorized by location  
List of stations categorized by genre  
Location  
Genre  
List of the latest stations which are recently  
added automatically.  
Add stations on the vTuner website  
New Stations  
You can add stations which are not in the vTuner station list.  
List of the most frequently accessed  
stations by the all listeners.  
Most Popular Stations  
1 Follow step 1 in Internet radio playback. p.21  
3 In the station/folder list, use ▲▼ to select the desired station, then  
2 Use ▲▼ to select Get access code, then press OK.  
press OK.  
• The latest vTuner website address and access code for this unit  
will be displayed. Please take a note of the access code. (This  
access code will be required when creating a vTuner account.)  
• After loading, playback of the selected station will start.  
• If you select a folder, use ▲▼ to select the desired station in the  
next hierarchy, then press OK.  
To stop playback, press C.  
To go back to the previous or next hierarchy, press ◄►.  
3 On your PC, visit the website and create your vTuner account.  
• Follow the instructions given on the PC screen.  
4 Add stations by following the instructions given on the PC screen.  
• The stations will be added to My Added Stations.  
 
English  
22  
Reset the station list  
Creating a New Station  
You can remove all stations/folders in Recently Played, Favorites and  
By entering your favorite artists or tracks, Pandora selects music and  
My Added Stations.  
creates a new station for you on the basis of the entered information.  
1 Follow step 1 in Internet radio playback. p.21  
1 On the player screen, press COLOR button(yellow) to call up the  
Tool Menu.  
2 Use ▲▼ to select Reset, then press OK.  
2 Use ▲▼ to select Create a new station, then press OK.  
3 Use ◄► to select Yes, then press OK.  
3 Enter a name of your favorite artist or tracks, then press OK while  
• All stations/folders in Recently Played, Favorites and  
OK is selected.  
My Added Stations are removed.  
• Search result will appear on the right side of theTV screen.  
• If the selection screen of result type appears, use ▲▼ to select  
the desired type, then press OK.  
Pandora® operations  
4 Use ▲▼ to select the desired station, then press OK to start the  
With this unit, you can instantly listen to personalized radio stations  
streamed over the Internet from Pandora.  
playback.  
Resumes the playback/pause the playback.  
Stops the playback and the station list will appear.  
Skips to the next track.  
Æ∆  
C
To learn more about Pandora, please visit www.pandora.com  
Activating Pandora  
In order to listen to Internet radio streamed from Pandora via the  
Internet, you must create a Pandora account and activate this unit.  
Note  
1 Press NETTV, then use ▲▼◄► to select PANDORA.  
2 Use ▲▼ to select Create new account, then press OK.  
3 Use ▲▼ to select No, I am new to Pandora., then press OK.  
On the Tool Menu, you can delete or rename the currently selected station.  
Guide to the Player Screen  
4 Note the activation code and website address displayed on theTV  
On the player screen, you can set various options to the currently  
playing track.  
screen.  
5 On your PC, visit the website address noted at step 4.  
6 Follow directions on the website to create your account.  
7 On this unit, select Continue and press OK to complete activation.  
a
b
c d e f  
American Oldies Radio  
ABC  
: XXXXX  
: XXXXX  
By  
On  
Adding Pandora User Accounts  
4:52  
0:00  
You can add multiple Pandora user accounts on this unit.  
1 Follow steps 1 to 2 in Activating Pandora. p.22  
2 Use ▲▼ to select Yes, I have a Pandora account, then press OK.  
3 Enter your e-mail address, then press OK while OK is selected.  
4 Enter a password, then press OK while OK is selected.  
5 Use ▲▼ to select Sign In, then press OK.  
Exit  
Why this track?  
Tool Menu  
Station List  
g
: Displays artist name.  
: Displays album name.  
a Artist name  
b Album name  
c
Your account is added to the user list and player screen appears  
on theTV screen.  
:
Give thumbs up to the currently playing track.  
Pandora will play tracks similar to the track.  
Note  
:
Give thumbs down to the currently playing  
track. Pandora will skip and will not play the  
track.  
d
e
Pandora is available only in the United States.  
You can add up to 5 accounts.After creating 5 accounts, Create new account will not  
be displayed.  
:
Bookmarks the currently playing track.  
You can view your bookmarked tracks list by  
accessing Pandora website and log into your  
account.  
:
:
Tells Pandora that you do not like the currently  
playing track. Pandora will not play the track for  
about a month.  
f
Displays COLOR buttons  
(red/green/yellow/blue) guide.  
g Operation guide  
   
English  
23  
Guide toTwitter Home screen  
UsingTwitter  
You can view yourTwitter feeds and more using theTwitter application  
on this unit.  
Twitter Home Screen consolidates browsing of tweets and some  
functional menus forTwitter.  
To call up the screen, press NET TV on the remote control and then  
use ▲▼◄► to select Twitter.  
– For more details aboutTwitter, please visit www.twitter.com  
SingleView  
Logging in toTwitter  
After you set up the network connection, you must log in with your  
Twitter account.  
Home  
Make sure the unit is not in network service or Browse USB mode.  
b
Favorite  
a
1 Press NETTV on the remote control and then use ▲▼◄► to  
Mentions  
select Twitter.  
• Login screen will appear.  
List  
2 Use ▲▼ to select Username, then press OK.  
• Software keyboard will appear.  
less than  
1
minute  
Phily and Maggy  
c
d
Right as rain.That was a sense of humor...  
Trends  
Select each one of characters from the list.  
Delete the last character in the entry field.  
Delete all characters in the entry field.  
Switch case and symbols.  
Characters  
Clear  
List of functional menus.  
a Menu  
:
:
:
:
All clear  
a/A/@  
Cancel  
OK  
Displays currently watching channel.  
Displays currently tweeting onTwitter.  
b Viewing channel  
c Timeline  
Cancel the input.  
Displays COLOR buttons  
d Operation guide  
(red/green/yellow/blue) guide.  
Determine the input Username and/or Password.  
FullView  
3 Use ▲▼◄► to input your Username and Password into the  
entry fields. Select OK after you have filled in all the necessary  
items in the entry field, then press OK.  
Single view switches to Full view when you select timeline then press  
OK.  
less than  
1
minute  
Phily and Maggy  
Right as rain.That was a sense of humor...  
• Password can be skipped next time onwards once you have  
selected Remember me when registering the user name.  
• Software keyboard will disappear.  
Home  
less than  
less than  
1
1
minute  
minute  
Perseverance prevails.  
I'll be there, textbook in hand!  
Favorite  
4 Use ▲▼◄► to select Start, then press OK.  
Tinner Loberto  
Greetings,I am looking for a small tiny stove in which to heat once a day.  
• The unit will now establish a connection with theTwitter server  
and perform authentication.  
Mentions  
less than  
1
minute  
Propatanga  
Would you like the straightforward reasons that people believe in it?  
List  
5 When the unit is logged in successfully,Twitter Home screen will  
appear at the left and the timeline will appear at the bottom of the  
TV screen.  
less than  
1
minute  
Peter’s rock star  
It’s not so rich a country as your country.  
Trends  
Note  
Viewing tweets on theTV  
User name and password are case-sensitive.  
User name will not accept your e-mail account. Use only your user name registered on  
theTwitter server.  
If you select Start with no user name, the unit logs in as 'Public'. In this case you can  
display 'Public timeline' and 'Trends' only.  
After logging in toTwitter, yourTV will download the latest 20 tweets  
to display.  
1 Press NETTV on the remote control and then use ▲▼◄► to  
For questions regardingTwitter, please visit www.twitter.com  
selectTwitter.  
2 Use ▲▼◄► to select the desired user name, then press OK.  
• If you have not stored the password,  
user name.  
will appear beside the  
3 When the unit is logged in successfully,Twitter Home menu will  
appear at the left and the timeline will appear at the bottom of the  
TV screen.  
Note  
4 user names (accounts) can be stored in this unit.  
Continued on next page.  
   
English  
24  
Viewing Favorites onTwitter  
ViewingTrends onTwitter  
YourTV displays the logged in user's favorites onTwitter.  
Trends show topics trending in your area.  
1 Follow steps 1 to 2 in Viewing tweets on theTV. p.23  
1 Follow steps 1 to 2 in Viewing tweets on theTV. p.23  
Îï  
to select Trends, then press OK.  
2 Use ▲▼ to select Favorite, then press OK.  
2 Use  
• If you have no favorites, TV was not able to acquire the Tweet.  
• Press COLOR button(green) to switch between the Area and  
will appear.  
Trends.  
• If you display Area, the topside will be displayed some countries,  
and the downside will be displayed some cities.  
Displaying Mentions onTwitter  
YourTV displays replies for the logged in user.  
1 Follow steps 1 to 2 in Viewing tweets on theTV. p.23  
2 Use ▲▼ to select Mentions, then press OK.  
• If you have no replies, TV was not able to acquire the Tweet.  
will appear.  
Viewing Lists onTwitter  
The list shows timeline categories such as friends, family, colleagues, or  
sports teams created by yourself on your account.  
1 Follow steps 1 to 2 in Viewing tweets on theTV. p.23  
2 Use ▲▼ to select List, then press OK.  
• If you have no lists, Cannot get the list information. will appear.  
3 When you press COLOR button(yellow) in 1 or 5 list view, the  
timeline will be separated at top and bottom.The upside displays 3  
timelines and the downside display 2 timelines.  
2ꢀListView  
less than  
1
minute  
Phily and Maggy  
Right as rain.That was a sense of humor...  
less than  
less than  
1
1
minute  
minute  
Perseverance prevails.  
I'll be there, textbook in hand!  
Tinner Loberto  
Greetings,I am looking for a small tiny stove in which to heat once a day.  
less than  
1
minute  
Propatanga  
Would you like the straightforward reasons that people believe in it?  
less than  
1
minute  
Peter’s rock star  
It’s not so rich a country as your country.  
4 When you press COLOR button(blue) in 1 or 2 list view, the  
timeline will increase 5 lines.  
5ꢀListView  
less than  
1
minute  
Phily and Maggy  
Right as rain.That was a sense of humor...  
less than  
less than  
1
1
minute  
minute  
Perseverance prevails.  
I'll be there, textbook in hand!  
Tinner Loberto  
Greetings,I am looking for a small tiny stove in which to heat once a day.  
less than  
1
minute  
Propatanga  
Would you like the straightforward reasons that people believe in it?  
less than  
1
minute  
Peter’s rock star  
It’s not so rich a country as your country.  
English  
25  
Switch to one of the channels on a list  
Using auto mode  
1 Press OK to display the last list that you selected.  
1 Press AUTO MODE to set yourTV to a predefined picture and  
sound setting.  
2 Use ▲▼ to select a channel, then press OK.  
• TheTV switches to that channel.  
Note  
Press CH+/− to select channels in a list or press the NUMBER buttons to select  
channels that are not in a list. .  
Sleep timer  
Sleep timer can set the unit to go into Standby mode after an  
incremental period of time.  
2 Use ▲▼to select one of the following settings:  
Auto picture Auto sound  
Description  
The customized settings you defined using  
the Picture and Sound menu  
Personal  
Enhanced picture contrast, sharpness and  
sound for viewing in a well-lit room  
Vivid  
Brilliant picture settings and clear sound for  
high action  
Sports  
Standard  
Movie  
For normalTV viewing  
Deep picture and powerful sound settings  
for a cinematic experience  
Press SLEEP repeatedly to change the amount of time  
(increases the time by 5 minutes up to 180 minutes).  
• Each press of will decrease the time by 5 minutes.  
Optimized for PCs and game consoles  
Optimized for low bitrate Internet video  
Game  
-
-
Internet video  
• Press INFO once to call up the display for checking the  
remaining time.  
To cancel sleep timer, press SLEEP or ◄► repeatedly until  
EcoTV settings for low power  
consumption  
Power saver  
-
0 ” is displayed.  
Optimized for music playback  
-
-
Music  
News  
Controls picture tone and set the anchor's  
voice at a comfortable volume  
Create and use lists of favorite channels  
You can create lists of your preferredTV channels so that you can find  
those channels easily.  
Select a list of favorite channels  
1 Press FAV.  
Your lists of favorite channels are displayed.  
2 Use ▲▼ to select the desired list, then press OK.  
Create or edit a list of favorite channels  
1 Press FAV to display your lists of favorite channels.  
2 Use ▲▼ to select the desired list, then press OK.  
3 Press OPTIONS to enter edit mode.  
• A list of channels is shown.  
4 Use ▲▼ to select the desired channel, then press OK to add or  
remove on the list of favorite channels.  
indicates that the channel is added.  
indicates that the channel is removed.  
5 Press MENU/E�IT to exit.  
 
English  
26  
For PC Input signal  
Changing picture format  
Display modes can be selected when yourTV receives a 16:9 or 4:3  
video signal.  
Three types of display modes can be selected for a PC Input signal.  
Unscaled  
Wide screen  
4:3  
Press FORMAT repeatedly to switch theTV aspect ratio.  
This unit can also be connected to your PC that has a DVI terminal. Use an HDMI-DVI  
conversion cable for thisVideo connection and it requires Stereo mini 3.5mm plug Audio  
cable for Analog Audio signal as well.  
Refer to 16:9 video signal on this page if PC has HDMI Output.  
Displays a proportionately stretched picture.  
Sidebars appear on both edges of the screen.  
4:3  
Displays a picture that is stretched out of proportion to fill  
the screen.  
Wide screen  
For 16:9 video signal  
Displays a picture in its original size.  
Unscaled  
TV screen information  
You can display the currently selected channel or other information  
such as the aspect ratio on theTV screen.  
4:3  
Automatic  
In the Digital mode, the detailed broadcasting information for the current  
off-the-air channel such as program title and program guides are displayed.  
1 Press INFO.  
Full (1080i/p only)  
Wide screen  
Other than DTV and HDMI connected devices, enlarges  
the picture to best fit the screen.  
DTV and HDMI connected devices display the picture at  
its original size.The subtitles may remain visible.  
Automatic  
Displays a 16:9 picture at a 4:3 size; the picture is  
shortened horizontally.  
Sidebars appear on both edges of the screen.  
4:3  
b
a
Displays a 16:9 picture that is stretched horizontally and  
vertically.  
Wide screen  
11.1  
KABC  
Full  
(1080i/p only)  
Displays a 16:9 picture at its original size.  
A Day of Memories  
c
d
Resolution  
1080i  
For 4:3 video signal  
Automatic  
Picture format  
Sound mode  
Audio language  
CC presence  
Rating  
Wide screen  
Stereo  
e
f
g
English  
CC  
None  
Sleeptimer  
Super zoom  
4:3  
h
a broadcast station  
b channel number/Input mode  
26  
p.15  
p.16  
Movie expand 16:9  
Movie expand 14:9  
Wide screen  
Watching channels from an external device  
Other than DTV and HDMI connected devices, enlarges  
the picture to best fit the screen.  
DTV and HDMI connected devices display the picture at  
its original size.The subtitles may remain visible.  
c program title (for DTV only)  
Automatic  
d program’s image aspect ratio  
e audio language (DTV)/audio mode (AnalogTV)  
Displays a 4:3 picture at a 16:9 size; the picture is stretched  
horizontally and vertically and its left and right edges are  
enlarged.This crops out the top and bottom of the picture.  
Super zoom  
4:3  
Sound  
p.34  
f CC (not available if Closed Caption is set to Off)  
Displays a 4:3 picture at its original size.  
Sidebars appear on both edges of the screen.  
Caption settings  
g child lock rating  
Displays a 4:3 picture at a 14:9 size; the picture is stretched  
horizontally and vertically.  
This crops out the top and bottom of the picture. Sidebars  
appear on both edges of the screen.  
Child and ratings lock  
Movie expand  
14:9  
h remaining time of sleeptimer  
Sleeptimer  
Displays a 4:3 picture at a 16:9 size; the picture is stretched  
horizontally and vertically.  
This crops out the top and bottom of the picture.  
2 Press INFO to hide the information.  
Movie expand  
16:9  
Note  
Displays a picture that is stretched out of proportion to fill  
the screen.  
While the program guide is displayed, the Closed Caption function is interrupted.  
The information display will automatically disappear in 5 seconds.  
Wide screen  
   
English  
27  
Picture (JPEG)  
USB  
1 Use ▲▼ to select a file or a folder.  
YourTV is fitted with a USB connection that enables you to view  
photos, listen to music or watch MPEG files stored on a USB Memory  
Stick.  
avi  
Image4.jpg  
Image5.jpg  
Image6.jpg  
Image7.jpg  
Image8.jpg  
jpg  
1 Connect the USB Memory Stick to the USB terminal on the side of  
mp3  
yourTV.  
Image1.jpg  
Image2.jpg  
Image3.jpg  
2 Press MENU/E�IT and use ▲▼◄► to select USB, then press  
OK.  
Image4.jpg  
11/11/2011 11:11 AM  
800×600 pixels  
avi  
Picture  
jpg  
mp3  
Music  
Image1.jpg  
Æ∆  
2 Press OK or  
to start a Slide show of the files.  
Image2.jpg  
Video  
Æ∆  
• Press OKor  
to pause the Slide show.  
Image3.jpg  
The F icon appears.  
• Press E or D to move between images.  
• Press BACK or C to stop the Slide show.  
Image4.jpg  
Image5.jpg  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
select the desired item.  
3 Use ▲▼ to select the Picture, Music or Video, then press OK.  
Short  
Medium  
Long  
Switches to the next image in 5 seconds.  
Switches to the next image in 10 seconds.  
Switches to the next image in 15 seconds.  
No effect when switching images.  
• The files recorded under the following specifications are  
required.  
Slide time *1  
• Press OPTIONS to display the optional menu, then press OK to  
switch between List and Thumbnails.  
None  
Picture (JPEG)  
Dissolve  
Wipe right  
Wipe left  
Wipe up  
Wipe down  
Box in  
Overlaps a next image on a current image.  
Pushes a current image out from left.  
Pushes a current image out from right.  
Pushes a current image out from bottom.  
Pushes a current image out from top.  
A next image comes into the center from out.  
A next image goes to the out from center.  
Upper limit  
Music (MP3)  
16Mpixel  
Sampling frequency  
Constant bit rate  
Video (MPEG)  
32 kHz, 44.1 kHz or 48 kHz  
32 kbps - 320 kbps  
Transitions *1  
Maximum size of a  
video  
1920 x 1080  
Box out  
.mpg,  
.mpeg  
Extension  
.vob  
.avi  
.mp4  
.wmv  
Selects the picture mode according to your preference.  
(Vivid, Sports, Standard, Movie, Game, Internet video and  
Power saver)  
Auto picture  
Video codec  
Audio codec  
MPEG1,  
MPEG2  
MPEG4 SP  
MPEG4ASP MPEG4 (WVC1)  
H.264,  
WMV9  
MPEG2  
YES  
0
Displays an image at its original direction.  
Rotates an image clockwise by 90 degrees.  
Rotates an image clockwise 180 degrees.  
Rotates an image clockwise 270 degrees.  
Displays an image at its original size.  
Magnifies a current image by 2 times.  
Magnifies a current image by 4 times.  
AC3  
YES  
YES  
YES  
YES  
NO  
NO  
NO  
NO  
90  
Rotate *2  
MPEG1 audio layer3  
(MP3)  
NO  
180  
270  
1x  
MPEG1 audio layer2  
LPCM  
YES  
YES  
NO  
NO  
NO  
NO  
NO  
NO  
YES  
NO  
NO  
NO  
NO  
NO  
YES  
NO  
NO  
NO  
NO  
YES  
AAC-LC  
Zoom *2  
2x  
4x  
WMA  
*1 You can set Slide time and Transitions when images are in Slide show.  
Note  
*2 You can set Rotate and Zoom when Slide show is in Pause mode.  
Up to 2GB (FAT16) or 8GB (FAT32) capacity can be supported.  
Up to 10,000 files or 1,000 folders with 19 hierarchies can be recognized.  
Up to 255 English characters can be recognized.  
This unit does not support MTP(MediaTransfer Protocol).  
This unit supports FAT16 and FAT32 file systems.  
If the file is not supported, an error message appears.  
When the USB Memory Stick is not recognized, try reconnecting it again.  
We cannot be held responsible if your USB Memory Stick is not supported, nor will we  
accept any liability for damage or loss of stored data.  
A file name exceeding 128 characters or contains a dot character is not supported on  
thisTV.  
Progressive JPEG files are not supported.  
Only an MPEG file with “.mpg”,.mpeg”,.vob”,.avi” or “.mp4”extension is supported.  
An extension “.mov” is not supported.  
   
English  
28  
Music (MP3)  
Video (MPEG)  
1 Use ▲▼ to select a file or a folder.  
1 Use ▲▼ to select a file or a folder.  
avi  
Track4.mp3  
Track5.mp3  
Track6.mp3  
Track7.mp3  
Track8.mp3  
avi  
Movie4.avi  
Movie5.avi  
Movie6.avi  
Movie7.avi  
Movie8.avi  
jpg  
jpg  
mp3  
mp3  
Track1.mp3  
Track2.mp3  
Track3.mp3  
Movie1.avi  
Movie2.avi  
Movie3.avi  
Title:  
Artist:  
Album:  
Duration: 00:05:28  
Year:  
Title:  
Director:  
Date:  
Duration:  
Æ∆  
Æ∆  
to play the selected files.  
2 Press OK or  
to play the selected files.  
2 Press OK or  
Æ∆  
Æ∆  
Æ∆  
Æ∆  
to pause, then press OKor again to  
• Press OKor  
to pause, then press OKor  
again to  
• Press OKor  
resume.  
resume.  
• Press D to skip to the next file.  
• Press E to return to the beginning of the file currently playing.  
• Press C to stop playback.  
• Press D to fast-forward search.  
• Press E to fast-backward search.  
• Press C to stop playback.  
Æ∆  
Press  
to resume from the point at which playback was  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
select the desired item.  
stopped. Press OK to play from the beginning of the file.  
• Press OPTIONS to display the optional menu, then use ▲▼ to  
select the desired item.  
Off  
On  
Off  
On  
Sets repeat playback to Off.  
Repeat  
Shuffle  
Sets repeat playback for all MP3 files in the  
current folder.  
Not available  
Subtitle Off  
Displays if no subtitle is available.  
Sets subtitle to Off.  
Sets shuffle playback to Off.  
Subtitle  
Sets shuffle playback for all MP3 files in the  
current folder.  
The sound will not be output from the unit's  
speakers.  
The sound will be output from the unit's  
speakers.  
You can control Audio Output from your  
connected EasyLink Compliant Devices with  
VOL +/− by using this unit's remote control.  
Selects the desired subtitle if theVideo file  
contains them.  
Subtitle 1-8  
Off  
On  
The unit displays if no Audio language is  
available.  
Not available  
Audio 1-8  
Off  
Audio  
language  
TV speakers  
Selects the desired Audio language if theVideo  
file contains them.  
Speakers  
EasyLink  
The sound will not be output from the unit's  
speakers.  
Selects the sound mode according to your preference.  
(Standard,Vivid, Sports, Movie, Music and News)  
Auto sound  
Note  
The sound will be output from the unit's  
speakers.  
On  
TV speakers  
You can control Audio Output from your  
connected EasyLink Compliant Devices with  
VOL +/− by using this unit's remote control.  
Speakers  
EasyLink  
TV speakers will be displayed only when Master EasyLink is set to On.  
EasyLink p.39  
Selects the picture mode according to your preference.  
(Vivid, Sports, Standard, Movie, Game, Internet video and  
Power saver)  
Auto picture  
Auto sound  
Note  
Selects the sound mode according to your preference.  
(Standard,Vivid, Sports, Movie, Music and News)  
The resume information will be kept even when the unit isTurned Off.  
If you play another file while the previously viewed file is being resumed, the resume  
information of the previously viewed file will be deleted.  
The file or the folder in resume stop mode will be highlighted in gray on List or  
.
Thumbnails  
TV speakers will be displayed only when Master EasyLink is set to On.  
EasyLink p.39  
English  
29  
3 Use ▲▼ to select the desired menu and an item, then press OK  
5 Use more of yourTV  
or use ▲▼◄► to determine the setting.  
Settings assistant  
Auto picture  
Backlight  
Picture  
Start now  
Personal  
This section describes the overview of the Setup menu displayed when  
you press MENU/E�IT and use ▲▼◄► to select Setup.  
The Setup menu consists of the function setting items below.  
Sound  
Features  
Installation  
Software  
Contrast  
Brightness  
Color  
1 Press MENU/E�IT to display Home menu.  
Tint  
Sharpness  
2 Use ▲▼◄► to select Setup, then press OK.  
Picture  
Watch TV  
Net TV  
Browse USB  
Browse PC  
Setup  
Adjusting the picture mode or customize the picture  
quality as your preference.  
Add new devices  
Sound  
Adjusting the sound mode, equalizer and some other  
sound functions.  
Features  
Adjusting the Closed Caption, parental guide and some  
other useful functions.  
Installation  
You can choose language, scan the channels available in  
your area or make the Network settings.  
Software  
You can check the current software version, update the  
software or deactivate the setting for Netflix andVUDU.  
4 When the setting is completed, press MENU/E�IT or BACK to  
exit.  
 
English  
30  
to select the desired setting, then press OK  
(Color alignment, Noise reduction, Black stretch,  
Picture  
* Advanced picture Dynamic contrast, Gamma, MPEG artifact reduction,  
Color enhancement, Custom color management  
and Film mode)  
Before you begin:  
You must set Home in Location.  
p.38  
Automatic  
Super zoom  
4:3  
Otherwise, personalized picture and sound settings will not be  
memorized after the unit goes into Standby mode.  
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press  
Movie expand 14:9  
Movie expand 16:9  
Wide screen  
Picture format  
OK.  
Changing picture format p.26  
2 Use ▲▼ to select Picture, then press OK.  
Settings assistant  
Auto picture  
Backlight  
Picture  
Start now  
Personal  
Unscaled  
Sound  
toTurn Off image enhancement  
features which makes theTV to  
act purely as a monitor  
Features  
Installation  
Software  
PC  
Contrast  
Brightness  
Color  
Mode selection  
Auto adjustment  
to enable image enhancement  
features to improve picture  
quality  
HDTV  
to adjust the horizontal/vertical position, clock and  
phase of the PC screen automatically  
Tint  
Sharpness  
3 Use ▲▼◄► to select the item you want to adjust, then press OK.  
Cursor ◄  
to decrease setting value to increase setting value  
to move PC screen left to move PC screen right  
Cursor ►  
• The following picture settings can be configured. Depending on  
the format of the picture Source, some picture settings are not  
available.  
Clock  
Phase  
to guide you through the best picture setting  
Settings assistant  
Horizontal shift  
Vertical shift  
to select the desired setting, then press OK  
(Personal, Vivid, Sports, Standard, Movie, Game  
Internet video and Power saver)  
When you adjust the following settings, Personal will  
be set automatically.  
to move PC screen down to move PC screen up  
Continued on next page.  
Auto picture  
Cursor ◄  
Cursor ►  
to reduce power  
consumption  
to set the backlight  
brighter  
Backlight  
to decrease contrast  
to decrease brightness  
to increase contrast  
to increase brightness  
Contrast  
Brightness  
to decrease color  
intensity  
to increase color intensity  
Color  
to add red  
to soften  
to add green  
to sharpen  
Tint  
Sharpness  
   
English  
31  
*You can set a particular about picture quality in Advanced picture.  
to select the desired setting, then press OK  
(Red, Yellow, Green, Cyan, Blue and Magenta)  
Auto picture  
Backlight  
Contrast  
Brightness  
Color  
Color alignment  
Noise reduction  
Black stretch  
Mode  
Minimum  
On  
Cursor ◄  
Cursor ►  
to rotate  
only selected  
color tint in  
counterclockwise  
direction  
to rotate only  
selected color  
tint in clockwise  
direction  
Tint  
Custom  
color  
management  
Dynamic contrast  
Gamma  
Off  
to decrease color to increase color  
with only selected with only selected  
color  
Tint  
MPEG artifact reduction Off  
Color enhancement  
Off  
Saturation  
Brightness  
color  
Sharpness  
to decrease  
brightness with  
only selected  
color  
to increase  
brightness with  
only selected  
color  
Advanced picture Custom color managem Red  
Off  
to set film mode to Off  
to set the color temperature to  
Personal, Cool, Normal and Warm  
When you adjust the following  
settings, Personal will be set  
automatically.  
Film mode  
Note  
to optimize the picture recorded by  
the original film  
Auto  
Mode  
Cursor ◄  
Cursor ►  
to increase  
Mode selection is available only if  
– the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.  
– the connected HDMI device is outputting a video signal.  
to decrease  
contrast with red contrast with red  
Red gain  
Green gain  
Blue gain  
to decrease  
contrast with  
green  
to increase  
contrast with  
green  
Color  
alignment  
to decrease  
to increase  
contrast with blue contrast with blue  
to decrease  
brightness with  
red  
to increase  
brightness with  
red  
Red offset  
to decrease  
brightness with  
green  
to increase  
brightness with  
green  
Green offset  
Blue offset  
to decrease  
brightness with  
blue  
to increase  
brightness with  
blue  
to select the desired setting, then press OK  
(Off, Minimum, Medium, Maximum and Auto)  
Noise  
reduction  
Black  
stretch  
to select the desired setting, then press OK  
(Off, Minimum, Medium and Maximum)  
Dynamic  
contrast  
to select the desired setting, then press OK  
(Off, Minimum, Medium and Maximum)  
Cursor ◄  
Cursor ►  
Gamma  
to adjust the gamma encoding of images  
MPEG  
artifact  
reduction  
to select the desired setting, then press OK  
(Off, Minimum, Medium and Maximum)  
Off  
On  
to set color enhancement to Off  
Color  
enhancement  
to make colors more vivid and bright  
English  
32  
DigitalTVꢀoperation  
Sound  
You can select the Audio language while yourTV is receiving the Digital  
broadcasting.  
Before you begin:  
You must set Home in Location.  
Digital audio  
language  
to select the language according to your preference.  
(It differs depending on the program.)  
Otherwise, personalized picture and sound settings will not be  
memorized after the unit goes into Standby mode.  
Analog/CableTVꢀoperation  
You can select Main or SAP while yourTV is receiving the Analog  
broadcasting that has the SAP (Second Audio Program).  
(It differs depending on the program.)  
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press  
OK.  
2 Use ▲▼ to select Sound, then press OK.  
Main  
SAP  
to output main-audio  
Alternate audio  
to output second-audio program  
Picture  
Auto sound  
Equalizer  
Balance  
Personal  
Sound  
Start now  
Analog/CableTVꢀoperation  
Features  
Installation  
Software  
When you set to Main in Alternate audio above, you can select Mono  
or Stereo if the Analog broadcasting is sending the MTS (Multichannel  
television sound).  
Digital audio language English  
SRSTruSurround XT  
AVL  
On  
Off  
On  
Mono  
to output mono-audio  
to output stereo-audio  
Mono/Stereo  
Stereo  
TV speakers  
Delta volume  
This selects sound modes for more spatial or surround sound  
reproduction.  
to set SRSTruSurround XT® to Off  
Off  
On  
SRS TruSurround  
�T  
to set SRSTruSurround XT® to On  
3 Use ▲▼◄► to select the item you want to adjust, then press  
OK.  
This function keeps a constant loudness differential between theTV  
commercials and the programs.  
The following sound settings can be configured. Depending on the  
format of the broadcasting, some sound settings are not available.  
Off  
to remove the auto volume leveling  
to select the desired setting  
(Personal, Standard, Vivid, Sports, Movie, Music and  
AVL  
to reduce volume differences between the  
TV commercials and the programs  
On  
News)  
Auto sound  
When you adjust the following settings (Equalizer,  
You can select the Audio Output from the unit’s speakers or not. If your  
amplifier is HDMI link function compatible and connected by an HDMI  
cable to this unit, some sound operations such as volume up can be  
changed by using this unit’s remote control. Make sure Master EasyLink  
SRS TruSurround �T and AVL), Personal will be set  
automatically.  
Adjust the tonal quality for each frequency.  
Cursor ◄  
Cursor ►  
is set to On. p.39  
Equalizer  
to adjust the each level of tonal quality  
not to output sound from the unit’s  
speakers  
Off  
On  
Press BACK to go back to the previous menu.  
Adjust the speakers to suit your listening preference.  
to output sound from the unit’s speakers  
TV speakers  
Cursor ◄  
Cursor ►  
to control Audio Output from your  
connected EasyLink Compliant Devices  
with VOL +/− by using this unit's remote  
control.  
Balance  
Speakers  
EasyLink  
to adjust the balance of the right and left speakers  
If a channel or Input device is too loud or too soft, navigate to that  
channel or Input device.  
Cursor ◄  
Cursor ►  
to set a negative delta  
volume level as per your  
personal preferences  
to set a positive delta  
volume level as per your  
personal preferences  
Delta volume  
Note  
Alternate audio and Mono/Stereo are not available when you watchingTV programs  
with a cable box or satellite set-top box connected through an HDMI cable or  
ComponentVideo cables.  
     
English  
33  
DigitalTVꢀoperation  
Features  
In addition to the basic Closed Caption, DTV has its own Closed  
Caption called Digital caption service. Use this menu to change the  
settings for Digital caption service.  
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press  
Selects one of these before changing  
any other item in Caption settings  
menu. Choose CS-1 under normal  
circumstances.  
OK.  
CS-1  
to  
CS-6  
Digital caption  
service  
2 Use ▲▼ to select Features, then press OK.  
Picture  
Caption settings  
Sleeptimer  
Closed captions  
You can choose the size, font, color, background and other  
characteristics of the caption text.  
Sound  
Features  
Installation  
Software  
Child lock  
Channel lock  
Start now  
You can reset the status of Digital  
Reset to default  
caption options.  
Change PIN  
You can change Closed Captioning font size, style, color  
and transparency.  
(Size, Style, Text Color and Text opacity)  
Digital caption  
options  
You can change background color and transparency of  
the displayed caption.  
(Background color and Background opacity)  
You can change edge color and type of the displayed  
caption.  
(Edge type and Edge color)  
3 Adjust the following items.  
Picture display  
Caption settings  
Closed Captioning displays the Audio portion of programming as text  
superimposed over the video.  
So, you must be Philip. Hi!  
I’m pleased to meet you.  
Font  
1
Use ▲▼ to select Caption settings, then press OK.  
(Style, Size,Text Color andText opacity)  
Edge  
(Edge color and Edge type)  
Caption settings Closed captions  
Sleeptimer Caption service  
Off  
Background  
(Background color and Background opacity)  
CC-1  
Child lock  
Digital caption service CS-1  
• Review your setting choice made below by looking in the upper  
left corner of the displayed setting box (not all selections show  
the differences selected).  
Change PIN  
Digital caption options Reset to default  
Analog/CableTVꢀoperation  
The primary caption and text services.The  
CC-1  
and  
T-1  
captioning or text is displayed in the same  
language as the program’s dialog (up to 4  
lines of script on theTV screen).  
CC-3  
and  
T-3  
Serve as the preferred data channels.The  
captioning or text is often a secondary  
language.  
Off  
On  
not to display the Closed Caption  
to display the Closed Caption  
Closed captions  
Rarely available and broadcasters use them  
only in special conditions, such as when  
CC-1 and CC-3 or T-1 and T-3 are not  
available.  
to display the Closed Caption when  
you set to mute  
On during mute  
Caption service  
There are 3 display modes according to  
programs:  
CC-2,  
CC-4,  
T-2  
and  
T-4  
Displays input characters on  
Paint-on  
Pop-on  
theTV screen immediately.  
Once characters are stored in  
memory, they are displayed all  
at once.  
Displays the characters  
continuously by scrolling (max.  
4 lines).  
Roll-up  
Continued on next page.  
     
English  
34  
Note  
Child and ratings lock  
Digital caption service that you can switch differs depending on the broadcast  
description.  
Closed Captioning service may not be controlled by this unit’s menu options if you are  
watching television through an external cable or satellite set-top box. In which case  
you will need to use the menu options on the external set-top box to control Closed  
Captioning.  
You can prevent your children from watching certain programs or  
certain channels by locking theTV controls and by using ratings.  
1 Use ▲▼ to select Child lock, then press OK.  
The captions do not always use correct spelling and grammar.  
Not allTV programs and product commercials include Closed Caption information.  
Refer to your areaTV program listings for theTV channels and times of Closed Caption  
shows.The captioned programs are usually noted in theTV listings with service marks  
such as CC.  
Picture  
Caption settings  
Sleeptimer  
Closed captions  
Sound  
Not all captioning services are used by aTV channel during the transmission of a  
Closed Caption program.  
Closed Caption will NOT be displayed when you are using an HDMI connection.  
To show the Closed Caption on yourTV screen, broadcast signal must contain the  
Closed Caption data.  
Features  
Installation  
Software  
Child lock  
Channel lock  
Start now  
Change PIN  
Not allTV programs and commercials have the Closed Caption or all types of the  
Closed Caption.  
Captions and texts may not exactly match theTV voice.  
Changing channels may delay the Closed Caption for a few seconds.  
Adjusting or muting the volume may delay the Closed Caption for a few seconds.  
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep  
pace with the on-screen action.This is not a malfunction.  
The caption or text characters will not be displayed while the Home menu or functions  
display is shown.  
If a black box appears on theTV screen, this means that the Closed Caption is set to  
the text mode.To clear the box, select CC-1, CC-2, CC-3 or CC-4.  
If the unit receives poor quality television signals, the captions may contain errors or  
there might be no captions at all. Some possible causes of poor quality signals are:  
– Automobile ignition noise  
2 Use the NUMBER buttons to enter the 4-digit numbers for your  
PIN code.  
• When you have not set up your PIN code, enter 0, 0, 0, 0.  
• When the PIN code is correct, Child lock menu is displayed.  
– Electric motor noise  
– Weak signal reception  
See the following description for setting each item.  
– Multiplex signal reception (ghosts or screen flutter)  
– Data dropout and Pixelation (for DTV only)  
Select  
Select  
Select  
Select  
Caption settings Channel lock  
The unit retains the Closed Caption setting if the power fails.  
Sleeptimer  
Child lock  
Change PIN  
TV ratings lock  
When the unit receives special effects playback signal (e.g. Search, Slow and Still) from a  
VCR’s video Output channel (ch3 or ch4), the unit may not display the correct caption  
or text.  
Movie ratings lock  
Canada English ratings lo  
Canada French ratings lo Select  
Region ratings lock Select  
Sleeptimer  
Sleep timer can set the unit to go into Standby mode after an  
incremental period of time.  
1 Use ▲▼ to select Sleeptimer, then press OK.  
2 Use repeatedly to change the amount of time  
(increases the time by 5 minutes up to 180 minutes).  
• Each press of will decrease the time by 5 minutes.  
Note  
When you select the higher rating and set it to , the lower ratings will be blocked  
automatically.  
When you set the All to , all ratings return to automatically.  
Region ratings lock will be available when the unit receives a Digital broadcast using  
the new rating system.  
To block any inappropriate programs, set your limits in TV ratings lock,  
Movie ratings lock and Region ratings lock.  
The child lock setting will be retained after a power failure or after the power is  
removed for longer than 10 seconds.  
• Press INFO once to call up the display for checking the  
remaining time.  
To cancel the sleep timer, press repeatedly until “ 0 ” is  
displayed.  
Note  
For the United States, the unit may download the Region Ratings LockTable, if required.  
The Canadian rating systems on this unit are based on CEA-766-A and CRTC policy.  
You can also press SLEEP directly to switch the desired setting.  
p.25  
Continued on next page.  
     
English  
35  
US movie  
ratings  
US TV  
ratings  
Channel lock  
Description  
Particular channels or external Input modes can be invisible in this  
function.  
All ratings locked including no rating  
No rating  
All  
NR  
None  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
3 Use ▲▼ to select Channel lock, then press OK.  
Appropriate for all children  
Appropriate for all children 7 and older  
General audience  
4 Use ▲▼ to select the particular channels or external Input, then  
press OK repeatedly to switch between view and block.  
G
indicates that the channel or Input Source is locked.  
indicates that the channel or Input Source is not locked.  
Parental guidance suggested  
Unsuitable for children under 13  
Unsuitable for children under 14  
PG  
PG-13  
40.1  
DTV  
DTV  
DTV  
DTV  
TV-14  
Caption settings Channel lock  
Restricted under 17 requires accompanying  
parent or adult guardian  
40.2  
Sleeptimer  
Child lock  
Change PIN  
TV ratings lock  
R
40.3  
Movie ratings lock  
No one under 17 admitted  
Mature audience only  
NC-17  
40.4  
Canada English ratings lo  
Canada French ratings lo  
Region ratings lock  
TV-MA  
HDMI 1  
HDMI 2  
HDMI 3  
Video  
To set the sub ratings  
ForTV ratings lock, you can further set the sub ratings to block specific  
elements of programming.To set the sub ratings, follow the step below.  
Use ▲▼◄► to select the desired rating, then press OK repeatedly to  
switch between and  
.
All  
FantasyViolence  
Channel lock  
SettingTV and movie ratings  
None  
TV-Y  
TV ratings lock  
Movie ratings lock  
Movie ratings lock is the rating system created by MPAA.TV ratings lock  
has controlled access to individual programs based on their age ratings  
and content rating.  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Canada English ratings  
Canada French ratings  
Region ratings lock  
3 Use ▲▼ to select TV ratings lock or Movie ratings lock, then  
press OK.  
4 Use ▲▼ to select the desired rating, then press OK repeatedly to  
switch between view and block.  
indicates that the rating is locked.  
indicates that the sub rating is locked.  
indicates that the rating is not locked.  
US TV ratings  
TV-Y7  
Sub Rating  
TV ratings lock  
FantasyViolence  
Dialog  
Language  
Sex  
TV-PG  
TV-14  
All  
Channel lock  
None  
TV-Y  
TV ratings lock  
Movie ratings lock  
Violence  
Language  
Sex  
Violence  
TV-MA  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Canada English ratings  
Canada French ratings  
Region ratings lock  
Note  
Blocked sub rating will appear beside the main rating category in TV ratings lock menu.  
You cannot block a sub rating if the main rating is set to  
Changing the category to or automatically changes all its sub ratings to the same  
or ).  
.
(
Continued on next page.  
Movie ratings lock  
All  
Caption settings Channel lock  
NR  
G
Sleeptimer  
Child lock  
Change PIN  
TV ratings lock  
Movie ratings lock  
PG  
Canada English ratings lo  
Canada French ratings lo  
Region ratings lock  
PG-13  
R
NC-17  
English  
36  
Canada English or Canada French ratings  
Installation  
You can select the rating for Canada English or Canada French  
broadcasting.  
1 Press MENU/E�IT and use ▲▼◄► to select Setup, then press  
3 Use ▲▼ to select Canada English ratings lock or  
OK.  
Canada French ratings lock, then press OK.  
2 Use ▲▼ to select Installation, then press OK.  
4 Use ▲▼ to select the desired rating, then press OK repeatedly to  
switch between view and block.  
Picture  
Language  
English  
indicates that the rating is locked.  
indicates that the rating is not locked.  
Sound  
Channels  
Autoprogram  
Location  
Features  
Installation  
Software  
Preferences  
Network  
Canada English Canada French  
ratings lock  
Description  
Network settings assi  
Start now  
ratings lock  
Reset AV settings  
Locked all ratings  
All  
E
Exempt program  
For all children  
C
For children over 8  
C8+  
General audience  
G
Unsuitable for ages under 8  
Parental guidance suggested  
Unsuitable for ages under 13  
Unsuitable for ages under 14  
Unsuitable for ages under 16  
Adult audience only  
PG  
8ans+  
3 Adjust the following items.  
13ans+  
Language  
1 Use ▲▼ to select Language, then press OK.  
14+  
16ans+  
18ans+  
18+  
Picture  
Language  
English  
Note  
Sound  
Channels  
Français  
Español  
TheV-Chip can block non rated programs as per “CEA-608-E sec. L.3”. If the option  
to block NR, None or E programs is used in Movie ratings lock, TV ratings lock,  
Canada English ratings lock or Canada French ratings lock accordingly “unusual  
results may occur and the unit may not receive emergency bulletins or other types  
of programming:”/Emergency Bulletins (Such as EAS messages, weather warnings  
and others)/Locally originated programming/News/Political/Public Service  
Announcements/Religious/Sports/Weather.  
Features  
Installation  
Software  
Preferences  
Network  
Reset AV settings  
Change PIN  
Although the default PIN code (0000) is supplied with the unit, you can  
set your own PIN code.  
2 Use ▲▼ to select English, Español or Français, then press OK.  
1 Use ▲▼ to select Change PIN, then press OK.  
Note  
2 Press the NUMBER buttons to enter the new 4-digit PIN code.  
If you need the English menu instead of the Spanish or French menu’s, press  
MENU/E�IT.  
• Enter PIN code again to confirm.  
Use ◄►▲▼ to select Configuración or Configuration, then press OK.  
Use ▲▼ to select Instalación or Installation, then press OK.  
Use ▲▼ to select Idioma or Langue, then press OK.  
Use ▲▼ to select English, then press OK.  
Change PIN  
Press MENU/E�IT to exit the Home menu.  
Please enter your current PIN.  
Note  
Make sure new PIN code and confirm PIN code must be exactly the same. If they are  
different, the space is cleared for reentering.  
If you have forgotten your PIN code, enter 0711 to reset the PIN code.  
       
English  
37  
Weak channel installation  
Channel installation  
This function lets you add the channels that were not added by the  
AutoProgram due to the reception conditions during the initial setup.  
It is available only when you select Antenna in Installation mode.  
Be sure the RF cable is correctly connected to this unit and you are  
registered with your cableTV provider when you install cable channels.  
1 Use ▲▼ to select Channels, then press OK.  
Autoprogram  
2 Use ▲▼ to select Weak channel installation, then press OK.  
If you switch wires (e.g. between antenna and CATV) or if you move  
the unit to a different area after the initial setting, or if you restore the  
DTV channels you deleted, it is recommended to use AutoProgram to  
perform a new channel search.  
• The PIN code will be required if you have locked channels.  
3 Use ◄► to select channel Input box, then use ▲▼ to select a  
channel you want to memorize.  
You need to select the signal type in Installation mode before you  
perform AutoProgram.  
4 Use ◄► to select Search, then press OK.  
5 Display will be changed to Store from Search when the channel is  
found, then press OK.  
1 Use ▲▼ to select Channels, then press OK.  
2 Use ▲▼ to select Autoprogram, then press OK.  
Note  
• If you run Autoprogram when you have locked channels, a  
message appears asking to enter your PIN code. Enter your  
PIN code in order to complete the installation.You need to set  
the channel lock again after the installation.  
In most cases, Digital channels are not broadcast on the RF channel on which they  
appear on yourTV.To add Digital channels you need to know the RF channel on which  
the Digital channel is being broadcast. (e.g. If there is a Digital channel 9.1 which is being  
broadcast on RF channel 25, you need to enter 25 while performing a weak channel  
installation.)To nd out the RF channel on which a particular Digital channel is being  
broadcast, please contact your local service provider.  
3 Press OK to select Start now.  
Installing Digital channels using Weak channel installation might not work for direct  
cable connections and if the Digital signal is too weak for theTV to process.  
• When the scanning and memorizing are completed, the lowest  
memorized channel will be displayed.  
4 Follow the on-screen instructions to complete the installation.  
Installation mode  
1 Use ▲▼ to select Channels, then press OK.  
System searching. Please wait...  
2 Use ▲▼ to select Installation mode, then press OK.  
3 Use ▲▼ to select Antenna or Cable, then press OK.  
Digital channels found: 0  
Analog channels found: 0  
• When Antenna is selected, theTV detects antenna signals. It  
searches for DTV and AnalogTV channels available in your area.  
• When Cable is selected, theTV detects signals supplied by cable.  
It searches for DTV AnalogTV and Cable channels available in  
your area.  
Auto programming may take more than 20 minutes to  
complete.  
Stop  
Uninstall channels  
Those channels can still be selected with the NUMBER buttons.  
1 Use ▲▼ to select Channels, then press OK.  
2 Use ▲▼ to select Uninstall channels, then press OK.  
Note  
After setting Autoprogram, using CH+/− skips unavailable programs automatically.  
If you are not receiving a signal from your cable service, contact the cable provider.  
If you press or during AutoProgram, the setup ofTV channels will be canceled.  
Even if Autoprogram is completed, the channel setting will be lost if the AC power  
3 Use ▲▼ to select the channel you want to remove, then press OK.  
You will not be able to select the channel again using CH+/−.  
cord is unplugged before the unit goes into Standby mode by pressing  
.
The PIN code will be required once you set a PIN code in the Child and ratings lock.  
• The removed channels are not displayed on the list of favorite  
channels.  
To reactivate a removed channel, use ▲▼ then press OK.  
If you want to change your PIN code, follow the instruction of Change PIN.  
     
English  
38  
Preferences  
Use Philips EasyLink  
You can set the unit to reduce the power consumption or adjust the  
backlight brightness in Location setting.  
EasyLink allows you to operate your connected EasyLink device.  
YourTV supports Philips EasyLink, which enables one-touch play and  
one-touch Standby between EasyLink-compliant devices. Compliant  
devices must be connected via an HDMI connector.  
One-touch play  
When you connect yourTV to devices that support one-touch play,  
Setting your location to home  
you can control yourTV and the devices with one remote control. For  
example, when you press ►(play) on your DVD remote control, your  
TV automatically switches to the correct channel to show the DVD  
content.  
Choosing Home gives you full flexibility to change predefined settings  
for picture and sound.  
1 Use ▲▼ to select Preferences, then press OK.  
2 Use ▲▼ to select Location, then press OK.  
One-touch Standby  
When you connect yourTV to devices that support Standby, you can  
use yourTV remote control to put yourTV and all connected HDMI  
devices in Standby mode.You can perform one-touch Standby using the  
remote control from any of the connected HDMI devices.  
Language  
Location  
EasyLink  
Retail store  
Home  
Channels  
Preferences  
Network  
System audio control  
When you connect yourTV to HDMI CEC compliant devices, your  
TV can switch automatically to play audio from the connected device.  
To use one-touch audio, you must map the audio input from the  
connected device to yourTV.You can use the remote control from the  
connected device to adjust the volume.  
Reset AV settings  
Remote control (RC) key forwarding  
RC key forwarding allows you to control EasyLink-compliant devices  
using yourTV remote control.  
3 Use ▲▼ to select Home, then press OK.  
HDMI-ARC (Audio Return Channel)  
The unit will be set up with predefined settings for  
retail displays. In this setting, the power consumption  
may possibly exceed the limit requirement of the  
ENERGY STAR® qualification.  
HDMI-ARC allows you to use Philips EasyLink to outputTV audio  
directly to a connected Audio device, without the need for an additional  
Digital Audio cable. Be sure that the device is HDMI CEC and ARC  
compliant, and that theTV is connected to the device using an HDMI  
cable attached to both HDMI-ARC connectors.  
Retail store  
This setting is ENERGY STAR® qualified.  
The unit is set to maximize the energy efficiency  
for home setting and it can be adjusted through a  
choice of picture and sound quality according to your  
preference.  
Home  
Note  
Note  
Philips does not guarantee 100% interoperability with all HDMI CEC devices.  
The EasyLink-compliant device must be Switched On and selected as the source.  
You must set Home. Otherwise, personalized picture and sound settings will not be  
memorized after the unit goes into Standby mode.  
If you select Home, E-sticker will not be displayed.  
E-sticker  
When you set Location to Retail store, E-sticker (Electronic Sticker) is  
displayed. E-sticker can beTurned Off using procedure below.  
1 Use ▲▼ to select Preferences, then press OK.  
2 Use ▲▼ to select E-sticker, then press OK.  
3 Use ▲▼ to select Off, then press OK.  
   
English  
39  
EasyLink  
Device list  
This function lets you see the product model number or name of  
connected devices.  
Use ▲▼ to select the desired EasyLink device listed on theTV screen,  
then press OK.  
This function allows you to operate the linked functions between our  
brand devices with a EasyLink feature and this unit connecting through  
an HDMI cable.You must connect this unit to our brand EasyLink  
devices and be sure its EasyLink setting is also set to On.  
Your connected EasyLink device will beTurned On if the device is in  
Stand by mode.  
1 Use ▲▼ to select Preferences, then press OK.  
2 Use ▲▼ to select EasyLink, then press OK.  
3 Use ▲▼◄► to select the item you want to adjust, then press  
Device list  
HDMI 1: DVD recorder  
HDMI 2: Blu-ray disc player  
OK.  
HDMI 3: Home theater system  
Location  
Master EasyLink  
AutoTV on  
On  
EasyLink  
On  
RC key forwarding  
HDMI-ARC  
Select  
Off  
Refresh  
Back  
Device list  
Select  
Set the Master EasyLink to On or Off.The following additional settings  
will be grayed out when you set to Off.  
Disables all EasyLink.  
Off  
Selects if you have connected an  
external device that is compatible with  
the EasyLink function.  
Master EasyLink  
On  
This unit willTurn On when the Power On signal is sent from your  
connected EasyLink device.  
This unit stays in Standby mode even if  
youTurn On your connected EasyLink  
device.  
Off  
On  
Auto TV on  
This unitTurns On automatically when  
youTurn On your connected EasyLink  
device.  
You can operate some functions such as disc playback or call up the  
menu of the connected devices, by using this unit’s remote control.  
You can set each HDMI input to activate the RC key forwarding. Each  
press of OK will toggle RC key forwarding On or Off.  
indicates that the RC key forwarding is On.  
indicates that the RC key forwarding is Off.  
Æ∆  
PLAY, PAUSE  
/STOP C /  
HDMI 1  
HDMI 2  
HDMI 3  
FWD D /REV E /OPTIONS/  
▲▼◄/OK/BACK/  
the NUMBER buttons can be used  
to control your connected EasyLink  
devices by this unit’s remote control.  
RC key forwarding  
HDMI-ARC allows you to use Philips EasyLink to outputTV Audio  
directly to a connected Audio device, without the need for an  
additional Digital Audio cable  
Disable HDMI-ARC.  
Off  
You can outputTV Audio through  
the HDMI cable solely, provided both  
theTV and device are HDMI-ARC  
compliant.  
HDMI-ARC  
On  
 
English  
40  
Wirelessꢀsetting  
Select to use a wireless LAN to connect to the Internet by wireless  
connection.  
Network  
Set up network connection settings in order to use NetTV or network  
upgrade function.  
4 Use ▲▼ to select Wireless, then press OK.  
The meanings of abbreviations are defined as below.  
This TV can be connected to your home  
network.  
Select your connection type.  
AP  
:Wireless LAN Access Point  
:Wi-Fi protected Setup  
:Wireless network name  
Wireless  
WPS  
SSID  
Wired  
The key entry screen will appear when you select SSID,  
WEP/WPA or Proxy address.  
1
2
3
4
5
6
7
8
9
0
Cancel  
a
k
u
b
l
c
d
n
x
e
o
y
f
g
q
.
h
r
-
i
j
m
w
p
z
s
t
5 Use ▲▼ to select the desired setting, then press OK.  
v
_
Select this setting if your router has a WPS  
button. Start scanning for wireless networks on  
Clear  
All clear  
a/A/@  
Cancel  
OK  
Easy connect  
theTV after pressing the WPS button on your  
router. If connection test fails, refer to the router’s  
manual for more details.  
Enter the key of the selected wireless network using ▲▼◄►,  
then press OK.  
Search for wireless networks automatically  
and select the SSID from the list.  
Scan  
Wireless network setting  
Clear  
: Clear the entered number or word.  
: Clear all the entered numbers or words.  
: Switch between abc,ABC and @!?  
: Shows the cancellation display.  
All clear  
a/A/@  
Cancel  
OK  
Set up the connection to the AP (e.g. wireless  
router) manually by entering the SSID.  
Manual entry  
: Set the entered number or word.  
Wiredꢀsetting  
1 Use ▲▼ to select Network, then press OK.  
Select to use an Ethernet cable to connect to the Internet by wired  
connection. Please purchase shielded Ethernet cables at your local store  
and use them when you connect to network equipment.  
Picture  
Language  
English  
Sound  
Channels  
Autoprogram  
Location  
4 Use ▲▼ to select Wired, then press OK.  
Features  
Installation  
Software  
Preferences  
Network  
Connection test will start automatically. p.42  
Network settings assi  
Start now  
Manual network settings  
Reset AV settings  
2 Use ▲▼ to select Manual network settings, then press OK.  
Network settings assistant Network selection  
Wireless  
Manual network settings Wireless network setting Auto  
Connection test  
Setting status  
IP configuration  
IP setting mode  
Proxy setting  
Proxy configuration  
Network settings assistant  
Reset network settings  
Before you proceed to Connection test or other settings in Network  
section, set this selection to suit your preference.  
2 Use ▲▼ to select Network settings assistant, then press OK.  
Language  
Channels  
Preferences  
Network  
Network settings assistant Start now  
Manual network settings Network selection  
Networkꢀselection  
Connection test  
Setting status  
Start now  
3 Use ▲▼ to select Network selection, then press OK.  
4 Use ▲▼ to select the desired setting, then press OK.  
Information  
Reset AV settings Reset network settings Start now  
If you connect to an Ethernet cable, select Wired  
to connect to the Internet.  
Wired  
If you have a router with WPS function, select  
Wireless to connect to the Internet.  
Wireless  
Continued on next page.  
3 Press OK to select Start now.  
     
English  
41  
Wirelessꢀnetworkꢀsetting  
Manually enter your SSID  
This menu is displayed only when you set Wireless in  
Network selection. In order to use a wireless network, you must set up  
a connection to the AP(e.g. wireless router).  
Set up the connection to the AP(e.g. wireless router) manually by  
entering the SSID.  
4 Use ▲▼ to select Manually enter your SSID, then press OK.  
3 Use ▲▼ to select Wireless network setting, then press OK.  
• AP(e.g. wireless router) SSID entry screen will appear.  
Enter the SSID using ▲▼◄►, then press OK.  
Auto  
5 Use ▲▼ to select the authentication setting of the selected  
Search for wireless networks automatically and select the SSID from the  
list.  
wireless network.  
• For a wireless network with authentication setting, select the  
authentication setting, according to the security type of the  
wireless network.  
4 Use ▲▼ to select Auto, then press OK.  
5 The list of wireless networks will be displayed.  
Use ▲▼ to select the appropriate the SSID, then press OK.  
Select security type for  
"Router 1"  
None  
Auto  
Router 1  
Enter Key  
Select  
WEP  
Manually enter your S Router 2  
WPA-PSK  
Router 3  
Router 4  
Enter Key  
Select  
WPA2-PSK  
Back  
Set the authentication setting to None.  
Set the authentication setting to WEP.  
Set the authentication setting to WPA-PSK.  
Set the authentication setting to WPA2-PSK.  
None  
WEP  
• If you select the SSID with , WEP/WPA Key entry screen will  
appear.  
Enter the WEP/ WPA key of the selected wireless network  
using ▲▼◄►, then press OK.  
WPA-PSK  
WPA2-PSK  
• If you select the SSID has a WPS, the WPS setting screen will  
appear.  
• For a wireless network without authentication setting, select  
None.  
Use ▲▼◄► to select a setting, then press OK.  
• If you selectWEP, WPA-PSK or WPA2-PSK,WEP/ WPA Key  
entry screen will appear.  
Enter the WEP/ WPA key of the selected wireless network  
using ▲▼◄►, then press OK.  
• Confirmation message will appear. Select Yes to complete the  
settings.  
Select this setting if your router has a WPS  
button. Start scanning for wireless networks on  
theTV after pressing the WPS button on your  
router. If connection test fails, refer to the router’s  
manual for more details.  
Easy connect  
WPS code  
Manual  
Select this setting if your router has a WPS but  
does not have a WPS button. Enter the 8-digit  
WPS PIN code shown on yourTV in the router  
settings menu via PC before Connect is selected.  
Continued on next page.  
If your wireless network with authentication  
setting (WEP,WPA-PSK or WPA2-PSK),  
WEP/WPA Key entry screen will appear. Enter  
the WEP/WPA key of the selected wireless  
network using ▲▼◄►, then press OK.  
• Confirmation message will appear. Select OK to complete the  
settings.  
Note  
For a wireless network with authentication setting, key icon appears to the right hand  
of the SSID.  
Signal icon shows the strength of the signal.  
WEP/ WPA key appears as asterisks on the confirmation screen.  
The wireless LAN supports following specifications.  
– Wireless standards  
– Frequency spectrum  
– Security protocol  
: IEEE 802.11 b/g/n  
: 2.4GHz  
:WEP/WPA/WPA2  
 
English  
42  
IPꢀconfiguration  
In following cases, select IP configuration to set each setting as  
Proxyꢀconfiguration  
3 Use ▲▼ to select Proxy configuration, then press OK.  
4 Use ▲▼ to select a setting, then press OK.  
necessary.  
– When connection test failed with the setting of Connection test.  
– When instructed by your Internet service provider to make specific  
settings in accordance with your network environment.  
Network selection  
Wireless network setting  
IP configuration  
Proxy setting  
Do not use  
3 Use ▲▼ to select IP configuration, then press OK.  
4 Use ▲▼ to select a setting, then press OK.  
Proxy configuration  
Network selection  
IP setting mode  
Manual  
Wireless network setting IP address  
192.168.11.3  
255.255.255.0  
192.168.11.1  
192.168.11.1  
0.0.0.0  
IP configuration  
Subnet mask  
Proxy configuration  
Default gateway  
Primary DNS  
Secondary DNS  
MAC address  
Do not use is selected for default settings.  
00:12:0E:10:09:15  
• If you need to change the proxy setting as instructed by your  
Internet service provider to set the designated proxy address  
and port, select Use.  
Sets the IP setting automatically.  
Sets the IP setting manually.  
Auto  
Do not use  
Use  
Not use the proxy server.  
Uses the proxy server.  
IP setting mode  
Proxy setting  
Manual  
A set of numbers which are assigned to  
IP address*1, 3  
Selects the number or word by using  
Proxy address*  
Proxy port*  
devices participating in a computer network.  
▲▼◄►, then press OK.  
A mask which is used to determine what  
subnet an IP address belongs to.  
Subnet mask*1, 3  
Use ▲▼ or the NUMBER buttons to input  
numbers.  
IP address of the network device (such as  
router) which provides Internet access.  
Default gateway*1, 3  
*Items can be selected only when Proxy setting is set to Use.  
Note  
Sets the DNS setting automatically.  
Sets the DNS setting manually.  
Auto  
DNS  
setting mode  
The range of input numbers for the port number is between 0 and 65535.  
(If you enter a number larger than 65535, it will be regarded as 65535.)  
For proxy port, the selected ports may be blocked and not be able to use depending  
on your network environment.  
If the proxy address is entered with blank only, proxy server setting will be set to  
Do not use.  
Manual  
A server which handles the name and IP  
address over the Internet.  
Primary DNS*2, 3  
A server which handles the name and IP  
address over the Internet.  
Secondary DNS*2, 3  
Connection test  
An address which recognizes the devices  
connecting to the network. It is also called  
Hardware Address.  
MAC address  
Perform the following steps to test your Internet connection after you  
have connected an Ethernet cable or entered network settings such as  
IP address, DNS settings, etc. manually.  
1
2
3
* Items can be selected only when IP setting mode is set to Manual.  
* Items can be selected only when DNS setting mode is set to Manual.  
* Use ▲▼ or the NUMBER buttons to input numbers.When you use  
▲▼ to input numbers, then press OK or input the triple digits by using  
the NUMBER buttons, the cursor moves to the next entry field.When you  
use ▲▼ to input numbers, then press OK or input the triple digits by using  
the NUMBER buttons at the rightmost entry field, numbers will be stored  
and go back to the previous menu.  
2 Use ▲▼ to select Connection test, then press OK.  
3 Press OK to select Start now.  
• Connection test will start automatically and the test result will  
appear right after the connection test finishes.  
The test is in progress.  
Testing…  
Pass  
Note  
Connection test is successfully completed.  
Connection test failed. Check the connection settings.  
The range of input numbers is between 0 and 255.  
If you enter a number larger than 255, the number will automatically be 255.  
The manually entered number will be saved even if you change the setting to Auto.  
Fail  
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next  
4 Press OK to go to the list of network status confirmation screen.  
cell.  
If the entered IP address or the default gateway or primary DNS number is same as  
the default setting, IP address setting will be set to Auto. (The manually entered number  
will be saved).  
When IP address setting is set to Manual, the setting of DNS setting will automatically  
be Manual and when IP address setting is set to Auto, you can set either Auto or  
Manual for DNS setting.  
Note  
If the connection test passes, you are ready to use NetTV or network upgrade function  
using the Internet without making any additional settings.  
If the connection test fails, check if the Ethernet cable is connected to thisTV properly  
or if you have entered all the required details for the wireless LAN connection properly.  
Continued on next page.  
 
English  
43  
Setting status  
You can check the status of network settings.  
Checking your current software version  
1 Use ▲▼ to select Software information, then press OK.  
2 Use ▲▼ to select Setting status, then press OK.  
• The version and a description of the current software is  
displayed.  
• Network setting list will be displayed.  
• MAC address of this unit will be displayed in the list.  
Picture  
Software information  
Software update  
PHL-XXXX_XXX_X  
Reset network settings  
Sound  
You can reset the status of network settings.  
Features  
Installation  
Software  
Automatically check for  
Netflix deactivation  
Netflix ESN  
2 Use ▲▼ to select Reset network settings, then press OK.  
3 Press OK to select Start now.  
VUDU deactivation  
YouTube deactivation  
MediaConnect code  
Return your settings to default values  
When you return picture and sound settings to their default values the  
channel installation settings are not affected.  
1 Use ▲▼ to select Reset AV settings, then press OK.  
2 Press OK to select Start now.  
Preparing for the software upgrade  
You require the following equipment:  
– A PC with web browsing capability  
– An archive utility that supports the ZIP-format  
(e.g.WinZip for Windows or StuffIt for Mac OS)  
– An empty clean formatted USB Memory Stick  
Software  
Philips continuously tries to improve its products and we strongly  
recommend that you upgrade theTV software when upgrades are available.  
Note  
Only FAT/DOS-formatted portable memory is supported.  
Use only software upgrades that can be found on the Philips web site.  
New software can be downloaded from our website at  
www.philips.com/support using the model number of yourTV to nd  
information.  
Warning  
1 Press MENU/EXIT and use ▲▼◄► to select Setup, then press OK.  
When the software upgrade is running, don’t press any buttons.  
Do not remove the USB Memory Stick during the software upgrade.  
If an error occurs during the upgrade, retry the procedure or for further assistance,  
please contact Call Center.  
2 Use ▲▼ to select Software, then press OK.  
Picture  
Software information  
Software update  
Select  
USB  
Off  
Sound  
Downloading the software  
Find information and software related to yourTV and download the  
latest software upgrade le to your PC.  
Features  
Installation  
Software  
Automatically check for  
Netflix deactivation  
Netflix ESN  
1 On your PC, open a web browser and go to  
VUDU deactivation  
YouTube deactivation  
MediaConnect code  
2 Enter the model number in the “Type the Model Number...” eld.  
3 Click the desired software to be downloaded.  
• Decompress the ZIP-le.  
4 Copy the upgrade le to the root directory of the USB Memory  
Stick.  
   
English  
44  
7 Press again toTurn the unit On.  
Upgrading the software  
• TheTV starts up with the new software.  
For further assistance, please contact Call Center.  
USB upgrade  
You can upgrade the software by using USB Memory Stick.  
Note  
In order to update software via the Internet, you must connect the unit to the Internet  
and set up necessary settings. Network settings assistant p.40 Network p.40  
1 Connect your USB Memory Stick with the upgrade le to the USB  
Please do not unplug the AC power cord or Ethernet cable while executing the  
terminal on the side of yourTV.  
Network update.  
All settings will remain the same even if you update the software version.  
The version of Net service will also be updated if newer version of Net service is  
available when updating the rmware.  
Automatically check for latest software  
This function lets you know if the latest software is available while the  
unit is connected to the Internet.  
1 Use ▲▼ to select Automatically check for latest software, then  
press OK.  
2 Use ▲▼ to select Software update, then press OK.  
3 Use ▲▼ to select USB, then press OK.  
4 Use ▲▼ to select the desired Update le.  
5 Use ◄► to select Yes, then press OK.  
2 Use ▲▼ to select the desired option, then press OK.  
Off  
Disable automatically check for latest software.  
A message will appear if there is the latest software on the  
network server.  
On  
6 Read the on-screen instructions and conrm that you want to  
continue with the installation.  
Netix deactivation  
Displays the deactivation setting for Netix.  
Software update is in progress. Please wait.  
Do not remove the USB storage device or turn the TV off while  
upgrade is in progress.  
1 Use ▲▼ to select Netix deactivation, then press OK.  
2 Use ▲▼ to select the desired option, then press OK.  
Update your TV with new software:  
Deactivate the connection to Netix.  
Yes  
Activate the connection to Netix.  
No  
Netix ESN  
Displays the ESN information.  
7 When the software upgrade is completed, press to set the unit  
to go into Standby mode, then remove the USB Memory Stick.  
1 Use ▲▼ to select Netix ESN, then press OK.  
8 Unplug the AC power cord for a few seconds from AC outlet and  
• Displays the ESN (Electronic Serial Number) to get any services  
plug it again.  
from Netix.  
9 Press again toTurn the unit On.  
• TheTV starts up with the new software.  
For further assistance, please contact Call Center.  
VUDU deactivation  
Displays the deactivation setting forVUDU.  
Network update  
You can update the software by connecting the unit to the Internet.  
1 Use ▲▼ to select VUDU deactivation, then press OK.  
2 Use ▲▼ to select the desired option, then press OK.  
1 Use ▲▼ to select Software update, then press OK.  
2 Use ▲▼ to select Network, then press OK.  
Deactivate the connection toVUDU.  
Yes  
Activate the connection toVUDU.  
No  
3 Use ◄► to select Yes, then press OK.  
• This unit will then start checking for the latest rmware version.  
4 Conrmation message will appear.  
YouTube deactivation  
Displays the deactivation setting forYouTube.  
Use ◄► to select Yes, then press OK.  
• The unit will start downloading the latest rmware version.  
• The unit will start updating the rmware version.  
• It may take a while to complete the updating.  
.
1 Use ▲▼ to select YouTube deactivation, then press OK.  
2 Use ▲▼ to select the desired option, then press OK.  
5 When the software update is complete, press  
to make sure the  
Deactivate the connection toYouTube.  
Yes  
unit goes to Standby mode.  
Activate the connection toYouTube.  
No  
6 Unplug the AC power cord for a few seconds from AC outlet and  
plug it again.  
 
English  
45  
Connecting your devices  
6 Connecting devices  
HDMI Digital connection  
No supplied cables are used with these connections:  
HDMI connection offers the highest picture quality.  
Please purchase the necessary cables at your local store.  
HDMI (High-Definition Multimedia Interface) transports high definition  
Digital video and multi-channel Digital Audio through a single cable.  
Before you connect AC power cord:  
Be sure other devices are connected properly before plugging in the AC  
power cord.  
set-top box  
or  
Selecting your connection quality  
IN  
OUT  
Blu-ray disc player  
or  
HDMI - Highest quality  
HDMI cable  
HD game console  
HDMI-DVI connection  
This unit can be connected to your device that has a DVI terminal.  
Use an HDMI-DVI conversion cable for this connection and it requires  
Audio cable for Analog Audio signal as well.  
Supports high-definition Digital signals and gives highest picture and  
sound quality.Video and Audio signals are combined in one cable.You  
must use HDMI for full high-definition video and to enable Philips  
EasyLink.  
Note  
Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP  
is a form of Digital Rights Management that protects high definition content in Blu-ray  
discs or DVDs.  
The HDMI-ARC connector on theTV features HDMI-ARC functionality.This allows  
output ofTV Audio to an HDMI-ARC-compliant device.  
cable receiver or  
satellite box with the  
DVI Output jack  
IN  
OUT  
HDMI-DVI  
conversion cable  
OUT  
IN  
Component (Y Pb Pr) - High quality  
Audio (L/R) cables  
Note  
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI  
cable is recommended for the better compatibility.  
For HDMI connection  
The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of video signals, 32kHz  
/ 44.1kHz and 48kHz of Audio signals.  
This unit accepts 2 channel Audio signal (LPCM) only.  
This unit accepts only signals in compliance with EIA861.  
Supports high-definition Analog signals but gives lower picture quality than  
HDMI. Component (Y/Pb/Pr)Video cables combine Red/Green/Blue  
video cables with Red/White Audio (L/R) cables. Match the cable  
colors when you connect to theTV.  
For HDMI-DVI connection  
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.  
HDMI-DVI connection requires separate Audio connections as well and the Audio  
signals are output as Analog (L/R) Audio.  
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.  
Composite - Basic quality  
For Analog connections. CompositeVideo/Audio Analog cable usually  
combine aYellow video cable with Red/White Audio (L/R) cables.  
With this unit,Yellow cable must be connected toY (Green) of  
ComponentVideo Input jacks.  
 
English  
46  
HDMI-ARC connection  
Composite AnalogVideo Connection  
HDMI-ARC allows you to use EasyLink to outputTV Audio directly to  
a connected Audio device, without the need for an additional Digital  
Audio cable.  
Composite AnalogVideo connection offers standard picture quality for  
video devices connected to the unit.  
If you connect to the unit’s CompositeVideo (Y/VIDEO) Input jack,  
connect Audio cables to the Audio (L/R) Input jacks.When the Audio is  
monaural, then only connect to the Audio L Input jack.  
OUT  
HDMI 1 IN only  
OUT  
Digital home theater  
amplifier  
HDMI-ARC  
HDMI cable  
DVD player  
IN  
Audio (L/R) +Video cables  
Note  
The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to  
output Digital Audio to an HDMI home theater system.  
Be sure that the device is HDMI CEC and ARC compliant and that theTV is connected  
to the device using an HDMI cable attached to HDMI-ARC connectors.  
Note  
With this unit,Yellow cable must be connected toY (Green) of ComponentVideo Input  
jacks.  
Whenever you connect to the CompositeVideo Input jack (Y/VIDEO), you must  
disconnect the ComponentVideo Input jacks (Pb and Pr). If you leave those jacks  
connected, it may cause of unstable picture.  
Component AnalogVideo Connection  
Only the left loudspeaker reproduces sound for mono equipment. Use a mono to  
stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.  
Component AnalogVideo connection offers better picture quality for  
video devices connected to the unit.  
If you connect to the unit’s ComponentVideo (Y/Pb/Pr) Input jacks,  
connect Analog Audio cables to the Analog Audio (L/R) Input jacks.  
Connecting theTV to the Internet using an Ethernet cable  
Internet  
OUT  
set-top box  
Audio (L/R) cables  
or  
LAN  
IN  
OUT  
IN  
Network provisioning  
Ethernet cable  
Note  
equipment  
Blu-ray disc/DVD  
recorder  
Component (Y/Pb/Pr)Video cables  
Note  
The unit accepts 480i/480p/720p and 1080i/p of video signals for this connection.  
Please purchase shielded Ethernet cables at your local store and use them when you  
connect to network equipment.  
After connecting an Ethernet cable,set up necessary network settings.Network  
Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid  
damaging the unit.  
If your telecommunications equipment (modem, etc.) does not have broadband router  
functions, connect a broadband router.  
If your telecommunications equipment (modem, etc.) has broadband router functions  
but there is no vacant port, use a hub.  
For a broadband router, use a router which supports 10BASE-T/100BASE-TX.  
Do not connect your PC directly to the Ethernet port of this unit.  
 
English  
47  
Connecting theTV to the Internet using a wireless LAN  
PC connection  
HDMI connection  
This unit can be connected to your PC that has a HDMI terminal. Use  
an HDMI cable for this Digital connection.  
Broadband router  
WLAN  
USB wireless LAN  
Ethernet cable  
adapter  
Internet  
IN  
OUT  
LAN  
HDMI cable  
PC  
Network provisioning  
equipment  
Note  
After you made the wireless connection, set up necessary network settings.  
Network p.40  
Use a Wireless LAN Access Point(AP)(e.g. wireless router) which supports IEEE  
802.11 b/g/n. (n is recommended for stable operation of the wireless network.)  
This unit does not support Ad-hoc mode.  
Other radio devices or obstacles may cause interference to the wireless network  
connection.  
HDMI-DVI connection  
This unit can be connected to your PC that has a DVI terminal. Use  
an HDMI-DVI conversion cable for thisVideo Digital connection and it  
requires Stereo mini 3.5mm plug Audio cable for Analog Audio signal as  
well.  
Digital Audio Output Connection  
If you connect this unit to an external Digital Audio device, you can  
enjoy multi-channel Audio like 5.1ch Digital broadcasting sound.  
Use a Digital Audio coaxial cable to connect the unit to external Digital  
Audio devices.  
IN  
OUT  
HDMI-DVI  
conversion cable  
PC  
OUT  
IN  
IN  
Digital Audio coaxial cable  
Stereo mini 3.5 mm plug Audio cable  
OUT  
Digital home theater  
amplifier  
VGA connection  
This unit is equipped with a PC Input jack. If you connect this unit to  
your PC, you can use this unit as a PC monitor.  
Use aVGA cable for thisVideo connection and it requires a Stereo mini  
3.5mm plug Audio cable for Analog Audio signal as well.  
VGA cable  
OUT  
PC  
IN  
OUT  
IN  
Stereo mini 3.5 mm plug Audio cable  
 
English  
48  
The following video signals can be displayed:  
Format  
VGA  
Resolution  
Refresh rate  
x
640  
480  
x
x
SVGA  
XGA  
800  
600  
60Hz  
1,024  
1,280  
1,360  
768  
768  
768  
x
x
WXGA  
Other formats or non-standard signals will not be displayed correctly.  
Note  
Please purchase theVGA cable or HDMI-DVI conversion cable that has a ferrite core.  
The following operations may reduce noise.  
– Attach a ferrite core to the AC power cord of your PC.  
– Unplug the AC power cord and use the built-in battery of your PC.  
Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI  
cable is recommended for the better compatibility.  
The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.  
HDMI-DVI connection requires separate Audio connections as well and the Audio  
signals are output as Analog (L/R) Audio.  
DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.  
USB Memory Stick  
This unit offers easy playback of picture (JPEG), music (MP3) and video  
(MPEG) files.  
Insert the USB Memory Stick into the USB terminal shown below.  
USB  
Note  
The unit recognizes only a USB Memory Stick.  
Do not use a USB hub or an extension cable to connect an external hard disk drive to  
the unit. (Not supported.)  
A USB Memory Stick is always inserted to this unit directly.  
A USB Memory Stick is not supplied with this unit.  
We do not guarantee that all USB Memory Sticks can be supported by this unit.  
Be sure to keep a backup copy of the original files on your device before you play them  
back on this unit.We have no responsibilities for damage or loss of your stored data.  
To protect your USB Memory Stick files from being erased place the write protect  
sliding tab in the protect position.  
When you are ready to remove a USB Memory Stick, set the unit to go into Standby  
mode to avoid any damage to your data and the unit.  
A USB Memory Stick that requires its own driver or the device with a special system  
such as fingerprint recognition are not supported.  
This unit is not allowed to use the USB Memory Stick which requires an external  
power supply (500mA or more).  
English  
49  
7 Useful tips  
FAQ  
Question  
Answer  
My remote control does not  
work.  
What should I do?  
• Check the antenna or cable connection to the main unit.  
• Check the batteries of the remote control.  
• Check if there is an obstacle between the infrared sensor window and the remote control.  
Test the signal Output use IR Signal Check.  
p.52 If okay, then possible infrared sensor trouble.  
• Aim the remote control directly at the infrared sensor window on the front of the unit.  
• Reduce the distance to the unit.  
• Re-insert the batteries with their polarities (+/–) as indicated.  
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this unit. Move  
the infrared-equipped device away from this unit, change the angle of the infrared sensor orTurn Off the infrared communication  
function.  
How come the initial setup  
appears every time I Turn On  
this unit?  
• Make sure to complete the initial setup before the unit goes into Standby mode.  
Why can I not watch some RF  
signal TV programs.  
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where previously unavailable  
channels are broadcast.  
• Make sure Autoprogram has been completed.  
• The selected channel may not be broadcasting.  
• When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete the  
Autoprogram. p.37  
• The selected channel cannot be viewed by the Child and ratings lock setting.  
• The unit requires some kind of antenna Input.An indoor antenna (Digital orVHF/UHF), an external antenna (Digital orVHF/UHF)  
or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.  
How come there is no image  
from the connected external  
devices?  
• Check if the correct Input mode is selected by pressing SOURCE. Watching channels from an external device  
• Check the antenna, cable or other Input connection to the unit.  
• When using the ComponentVideo Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected  
to their corresponding colored jacks on the unit.  
When I enter a channel number, • Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones signifying the  
it changes automatically.  
broadcasting station channel number.These basic numbers used for previous Analog broadcasts. (e.g., Input ch# 30 automatically  
changes to ch# 6.1)  
Why are captions not displayed • Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning production  
entirely? Or, captions are  
delayed behind the dialog.  
companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, selective editing is used to  
insure that the captions remain up-to date with the currentTV screen dialog.  
How can I set the clock ?  
• There is no clock function on this unit.  
I cannot change the Child lock  
setting because my PIN code no  
longer works.  
• Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN code in Child  
and ratings lock.  
p.34 When you forget your PIN code, enter 0711 in Change PIN to reset the PIN code.  
Troubleshooting  
If the unit does not perform properly when operated as instructed in this User Manual,  
check the following chart and all connections once before calling for service.  
Symptom  
Remedy  
No power  
• Make sure the AC power cord is plugged in.  
• Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into the AC outlet to ensure that the AC  
outlet operates normally.  
• If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.  
Control buttons do not work.  
• Press only one button at a time. Do NOT press more than one button at the same time.  
• Ensure that no buttons on the remote control are depressed and move freely.  
Continued on next page.  
 
English  
50  
Symptom  
Remedy  
Power is ON but no screen  
image.  
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.  
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray/DVD recorder.  
• Make sure that the selected Input mode is connected to the working Input jack.  
• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to  
wake up your computer.  
No picture or sound  
• Check if the Power is On.  
• Check whether all the cables to the unit are connected to the correct Output jack of your device like Blu-ray/DVD recorder.  
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.  
• Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord andTurn On the unit again.  
• Check whether the connection of the antenna, cable receiver or satellite box is connected correctly.  
• Make sure that the selected Input mode is connected to the working Input jack.  
• Check if your computer is NOT in sleep mode when the Input mode of this unit is in PC mode.Tap any key on the keyboard to  
wake up your computer.  
• Make sure that the sound is not muted. Press MUTE so that the volume bar and current volume level will appear on theTV screen.  
• Make sure that the volume is NOT set to 0 or . If so, use VOL +/− to adjust to the desired volume.  
• Make sure that the headphone is NOT connected to the Headphone Audio Output jack.  
• Make sure that the TV speakers is NOT set to Off.  
No color  
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.  
• Adjust Color in Picture settings.  
No sound, distorted sound or  
incorrect Audio Sound is heard  
when using the HDMI-DVI  
connections.  
• Make sure that the Analog Audio signals from the HDMI-DVI device are connected to the Analog Audio (L/R) Input jacks.  
• When using Component AnalogVideo, Composite AnalogVideo or PCVGAVideo make sure that the Analog Audio (L/R)  
connectors are mounted into the Audio (L/R) Input jacks.  
Adjusted Picture or Sound  
settings are not effective every  
time the unit isTurned On.  
You must set Home in Location.  
Otherwise, the settings you adjusted will not be memorized after the unit goes into Standby mode.  
Sound OK, picture poor  
• Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog  
broadcast signal.  
• Adjust Contrast and Brightness in Picture settings.  
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.  
• For the best picture quality, watch High Definition wide screen programs.  
If the HD content is not available, watch Standard Definition programs instead.  
Picture OK, sound poor  
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.  
• Check if the Audio cable is connected into the unit correctly.  
You see a distorted picture or  
hear an unusual sound.  
You may be getting interference from electrical appliances, automobiles, motorcycles or fluorescent lights when viewing an off-the-  
air low power NTSC analog broadcast signal.  
Try moving the unit to another location to see if this is the cause of the problem.  
Ghosts, lines or streaks in picture • Electrical interference from nearby appliances may affect picture quality when viewing an off-the-air low power NTSC analog  
broadcast signal.  
• View otherTV channels.The problem might be limited to the broadcasting station or weak signal strength.  
You see noise or trash on the  
screen.  
• When the capabilities of the unit exceed the capabilities of the Digital broadcasting, the signal will be increased to match the  
capabilities of the display of the unit.This may cause noise or trash.  
When viewing an off-the-air low power NTSC Analog broadcast signal may show noise or trash on the screen.  
Different color marks on theTV  
screen  
• View otherTV channels.The problem might be limited to the broadcasting station, missing data or pixelation.  
You switch to a different Input  
and the volume changes.  
• This unit will memorize the volume level from the last time you adjusted it.  
• If the volume of the sound from another device is higher or lower, then the loudness will change.  
• Make sure AVL is set to On.  
You switch to a different Input  
and the screen size changes.  
• This unit will memorize the viewing mode from the last time you used the particular Input modes.  
The display image does not  
cover the entire screen.  
• If you are using the unit as a PC monitor, make sure that Horizontal shift and Vertical shift in Picture are set correctly.  
• If you are watchingTV or using the CompositeVideo, ComponentVideo or HDMI with 480i Input, press FORMAT repeatedly to  
switch various screen modes.  
Captions are displayed as a white • Interference from buildings or weather conditions may cause captioning to be incomplete if watching AnalogTV (NTSC) signals.  
box. No caption is displayed in  
• Broadcasting station may shorten the program to insert advertisements.  
the Closed Caption-supported  
• The Closed Caption decoder cannot read the information of the shortened program.  
program.  
Black box is displayed on theTV  
screen.  
• The text mode is Selected. For caption, select CC-1, CC-2, CC-3 or CC-4.  
Cannot connect to the network. • Check if the Ethernet cable connection is properly made.Turn On the modem or broadband router.  
• Check the network settings.  
• Check if the broadband router and/or modem is correctly connected.  
Sometimes video quality is poor  
when using the wireless LAN.  
• The wireless network connection quality varies depending on the distance or obstacles (e.g. wall, basement, 2nd floor) between theTV  
Wireless LAN Adapter and the wireless router (access point), from other wireless networks, and brand and type of the wireless router  
(access point).When using theWireless LAN of theTV, it is suggested to place the wireless router as close as possible to theTelevision.  
Continued on next page.  
English  
51  
Symptom  
Remedy  
Wireless LAN connection fails or • Check the installation location of theTV and wireless router (access point). Signal quality may be affected for the following reasons.  
– Interference of other wireless devices, microwaves, fluorescent lights, etc., are placed nearby.  
wireless connection is poor.  
– There are floors or walls between the wireless router andTV.  
– If the problems continue even after checking the above, try making a wired LAN connection.  
Cannot use the wireless  
connection.  
• Check if the Wireless LAN Access Point (AP) (e.g. wireless router) is oriented properly or not placed too close between them.  
• Once you have activated the wireless connection please wait 30 seconds for the connection to be established afterTurning On the  
unit, before trying to access network features such as NetTV.  
Cannot use Netflix feature.  
• Netflix is available only in the United States and Canada.  
• Check if the network connection is properly made.  
• Visit http://www.netflix.com/HowItWorks on your PC and become a Netflix member.  
Cannot add movies orTV  
episodes to the Instant Queue.  
• Visit www.netflix.com on your PC.  
Even though the speed of the  
Internet connection improves  
during playback, the picture  
quality of Netflix streaming  
movie does not improve.  
• The picture quality does not change during playback. It differs depending on the speed of Internet connection at the time of loading.  
Cannot useVUDU feature.  
• VUDU is available only in the United States.  
• Check if the network connection is properly made.  
Cannot rent or buy movies /TV  
episodes onVUDU.  
You need to activate theVUDU account. For detailed information, please visit the service providers website at  
• Log into your account at http://my.vudu.com and check your payment information.  
The picture quality of streaming  
movie (Netflix, Film Fresh or  
VUDU) is poor.  
• Check the speed of your Internet connection.You need speeds of at least 8 Mbps to this player for high quality uninterrupted  
playback.  
Streaming movie (Netflix,  
Film Fresh orVUDU) often  
stops or starts buffering during  
playback.  
• Contact your Internet service provider to troubleshoot your Internet connection for speed and line quality. Consistent line quality  
and speed are very important for Internet video playback.  
Cannot connect to the network  
while my PC is connected to the  
network.  
• Check the content of your Internet service contract to see if your Internet Service Provider prevents multiple terminals connecting  
at the same time.  
Folder or files stored on DLNA  
home media server are not  
displayed in the file list or cannot  
be played back.  
• Check the setting on your home media server. (Refer to the user manual of the home media server.)  
• Check the network connection and settings.  
Cannot use Film Fresh feature.  
• Film Fresh is available only in the United States.  
• Check if the network connection is properly made.  
• Visit http://filmfresh.roxionow.com/ (Film Fresh) on your PC and create an account.  
Cannot use Pandora feature.  
• Check if the network connection is properly made.  
• Pandora is available only in the United States.  
You must create a Pandora account and activate this unit. Activating Pandora  
The audio of Internet radio  
station interrupted.  
• vTuner server, station or the Internet connection is busy.The bit rate of the station is high.  
Cannot play back Internet radio.  
• Check if the network connection is properly made.  
• Check the firewall setting of the modem or router.  
• For some stations, playback is not available on this unit.  
The quality of the Internet radio  
audio is poor or noise occurs  
during playback of Internet  
station.  
• The bit rate of the station is low.  
Cannot get into the  
PC's screen even the  
Philips Wireless MediaConnect is  
launched.  
• The start up screen (PHILIPS logo with spinning circle) keep displaying until the unit found the PC that is running  
Philips Wireless MediaConnect.  
• Make sure if the network connection is connected properly.  
• Check if your PC runs Philips Wireless MediaConnect.  
• Make sure yourTV and PC are connected on the same network.  
I have a 1.8GHz CPU but  
MediaConnect does not work  
on my PC.  
• For smooth operation of your PC while Philips Wireless MediaConnect is running you need a mainstream dual core processor from  
Intel® or AMD.  
Intel® : Core™2 Duo or Core™ i3/5/7 @ 1.8GHz or higher.  
AMD :Athlon™ II X2,Turion™ II Dual-Core or Phenom™ X2 @ 2GHz or higher.  
Note  
The LCD screen is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of blue, green or red.  
This is not to be considered a defect in the LCD screen.  
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this User Manual for more details on correct operations.  
English  
52  
8 Information  
Glossary  
Maintenance  
DTV (ATSC)  
Cabinet Cleaning  
Acronym that stands for AdvancedTelevision Systems Committee and the name  
of the Digital broadcasting standards.  
Wipe the front panel and other exterior surfaces of the unit with  
a soft cloth.  
Never use a solvent or alcohol. Do not spray insecticide liquid near  
the unit. Such chemicals may cause damage and discoloration to  
the exposed surfaces.  
Aspect ratio  
The width of aTV screen relative to its height. ConventionalTVs are 4:3 (in other  
words, theTV screen is almost square); widescreen models are 16:9 (theTV  
screen is almost twice as wide as its height).  
Panel Cleaning  
CEC (Consumer Electronics Control)  
This allows you to operate the linked functions between our brand devices with  
CEC feature and this unit.We do not guarantee 100% interoperability with other  
brands of CEC compliant devices.  
Wipe the panel of the unit with a soft cloth. Before cleaning the panel,  
disconnect the AC power cord.  
Servicing  
ComponentVideo  
Should your unit become inoperative, do not try to correct the  
problem yourself.There are no user serviceable parts inside. Call our  
toll free customer support line found on the cover of this User Manual  
to locate an authorized service center.  
This is a video signal format that conveys each of 3 principal colors of light  
(red, blue and green) through different signal lines.This allows the viewers to  
experience picture colors as original as it is.There are several signal formats,  
includingY/Pb/Pr andY/Cb/Cr.  
Dolby Digital  
IR Signal Check  
If the remote control is not working properly, you can use a Digital  
camera (including a cellular phone with built-in camera) to see if it is  
sending out an infrared signal.  
The system developed by Dolby Laboratories to compress Digital sound. It offers  
stereo sound (2ch) or multi-channel Audio.  
E-sticker  
With a Digital camera  
(including built-in cell phone cameras):  
E-sticker is showing set features, technical information, etc on thisTV set  
that is displayed on theTV screen mainly used byTV retailers. Previously the  
information was on a printed sticker that was put on the display.  
Point the Digital Camera towards the remote control  
infrared diode at the front of the remote control.  
Press any button on the remote control and loOK  
through the camera display. If the infrared pulsating  
light appears through the camera, the remote control  
is sending out an IR signal.  
HDMI (High-Definition Multimedia Interface)  
Interface that supports all uncompressed, Digital Audio/Video formats including  
set-top box, Blu-ray/DVD recorder or Digital television, over a single cable.  
HDTV (High Definition TV)  
Ultimate Digital format that produces high resolution and high picture quality.  
Analog TV (NTSC)  
Acronym that stands for NationalTelevision Systems Committee and the name  
of Analog broadcasting standards.  
off-the-air NTSC signals are no longer being sent by major broadcasting stations  
in the USA.  
PIN code  
A stored 4-digit number that allows access to parental control features.  
SAP (Secondary Audio Program)  
Second-Audio channel delivered separately from main-Audio channel.This Audio  
channel is used as an alternate in bilingual broadcasting.  
SDTV (Standard Definition TV)  
Standard Digital format that is similar to the AnalogTV (NTSC) picture quality.  
SRS TruSurround �T®  
Creates a truly immersive surround sound experience with rich bass and clear  
dialog from only two speakers.  
   
English  
53  
9 Specifications  
Model #  
Pictureꢀenhancement  
Type  
32PFL4907  
26PFL4907  
22PFL4907  
160° (V) by 170° (H)  
2W x 2  
WXGA (1366 x 768 pixels 60Hz)  
16:9  
Aspect ratio  
Viewing angles  
178° (V) by 178° (H)  
150° (V) by 160° (H)  
ATSC / NTSC  
Built-in Digital tuner  
Soundꢀenhancement  
Mono / Stereo  
Mono, Stereo, SRSTruSurround XT®  
Power output (RMS watts)  
Equalizer  
8 W x 2  
5 band  
Easeꢀofꢀuse  
SD (4:3 Source)  
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 /  
Wide screen  
HD (16:9 Source)  
HDMI AV (4:3 Source)  
: Automatic / 4:3 / Wide screen / Full (1080i/p only)  
: Automatic / Super zoom / 4:3 / Movie expand 14:9 / Movie expand 16:9 /  
Wide screen  
Picture format  
HDMI AV (16:9 Source)  
PC Source  
: Automatic / 4:3 / Wide screen / Full (1080i/p only)  
: 4:3 / Wide screen / Unscaled  
(Refer to HDMI AV (16:9 Source) above if PC has HDMI Output. )  
Photo Slide show  
MP3 playback  
JPEG files only  
MP3 files only  
MPEG1(.mpg/.mpeg), MPEG2(.mpg/.mpeg/.vob), H.264(.mp4),  
MPEG4 SP/ASP(.avi), MPEG4(.mp4),WVC1(.wmv)  
Video playback  
Connections  
1
ComponentVideo Input  
supporting video signals : 480i/p, 720p, 1080i/p 60Hz  
CompositeVideo Input  
(sharedY terminal of Component  
Video)  
1
3
supporting video signals : 480i/p, 720p, 1080i/p, 24Hz-60Hz  
HDMI-ARC (HDMI 1 only)  
HDMI Input  
PC-Input signal up to WXGA (1360 x 768)  
Audio L/R Input  
PC Input  
1
viaVGA, HDMI and HDMI-DVI + Analog Audio L/R  
2
1 terminal mainly for wireless LAN adapter, both terminals function as a USB input terminal  
USB  
Wireless LAN  
Ethernet port  
Supporting wireless standards : IEEE 802.11 b/g/n (2.4GHz)  
1
1
Digital Audio Output  
Headphone Output  
supporting Dolby Digital  
1
1/8 inches (3.5mm)  
Power  
Power requirements  
Temperature  
Operating temperature  
120V~ AC +/− 10%, 60Hz +/− 0.5%  
41 °F (5 °C) to 104 °F (40 °C)  
Specifications are subject to change without prior notice.  
 
English  
54  
10 Warranty  
LIMITED WARRANTY  
( )  
ONE 1 YEAR  
WARRANTY COVERAGE:  
This warranty obligation is limited to the terms as set forth  
below.  
or a part that has been modified without written company per-  
mission, or (d) if any serial number has been removed or defaced,  
or (e) product, accessories or consumables sold “AS IS” without  
warranty of any kind by including refurbished product sold “AS  
IS” by some retailers.  
WHO IS COVERED:  
This product warranty is issued to the original purchaser or the  
person receiving the product as a gift against defects in materials  
and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
screen markings resulting from viewing fixed stationary con-  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of the company.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product.  
WHAT IS COVERED:  
This warranty covers new products if a defect in material or  
workmanship occurs and a valid claim is received within the  
Warranty Period. At its option, the company will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in current inventory, or (3)  
refund the original purchase price of the product.  
Replacement products or parts provided under this warranty are  
covered against defects in materials and workmanship from the  
date of the replacement or repair for ninety (90) days or for the  
remaining portion of the original product’s warranty, whichever  
provides longer coverage for you. When a product or part is  
exchanged, any replacement item becomes your property and the  
replaced item becomes company property. When a refund is  
given, your product becomes company property.  
A product that requires modification or adaptation to enable  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
repair of products damaged by these modifications.  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
Product lost in shipment and no signature verification receipt  
can be provided.  
Failure to operate per Owner’s Manual.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE…  
Contact the Customer Care Center at:  
1 866 309 0843  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-  
TATIONS:  
This Limited Warranty applies only to new company manufac-  
tured products that can be identified by the trademark, trade  
name, or logo affixed to it. This Limited Warranty does not apply THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY  
to any hardware product or any software, even if packaged or  
sold with the product, as manufacturers, suppliers, or publishers  
may provide a separate warranty for their own products pack-  
aged with the bundled product.  
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
ON THIS PRODUCT IS LIMITED IN DURATION TO THE  
DURATION OF THIS WARRANTY.  
The company is not liable for any damage to or loss of any pro-  
grams, data, or other information stored on any media contained  
within the product, or other additional product or part not cov-  
ered by this warranty. Recovery or reinstallation of programs,  
data or other information is not covered under this Limited  
Warranty.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-supplied product,  
(b) to damage caused by service performed by anyone other than  
company approved Authorized Service Location, (c) to a product  
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.  
P&F USA, Inc. PO Box 2248, Alpharetta, GA 30023-2248  
061708  
 
i
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
License  
0.  
This License applies to any program or other work which contains  
a notice placed by the copyright holder saying it may be distributed  
under the terms of this General Public License. The “Program”,  
below, refers to any such program or work, and a "work based  
on the Program" means either the Program or any derivative  
work under copyright law: that is to say, a work containing the  
Program or a portion of it, either verbatim or with modifications  
and/or translated into another language. (Hereinafter, translation  
is included without limitation in the term “modification".) Each  
licensee is addressed as “you”. Activities other than copying,  
distribution and modification are not covered by this License;  
they are outside its scope.The act of running the Program is not  
restricted,and the output from the Program is covered only if its  
contents constitute a work based on the Program (independent  
of having been made by running the Program). Whether that is  
true depends on what the Program does.  
This product uses some open source software:  
GPL software:linux, gcc, sysfsutils, Realtek WiFi driver, binutils, busybox,  
dhcpcd  
LGPL software: directfb, glibc, Qt  
MIT: Expat, c-ares, libxml2, lua, lua-xmlreader, lua-slncrypto, giflib  
MIT/X: cURL  
gSOAP Public License: gSOAP  
BSD:WPA Supplicant  
zlib/libpng License: zlib, libpng  
XML-RPC FOR C/C++ license: xmlrpc  
FreeType, LibJPEG, OpenSSL, MINIX 3, unicode, ADPCM, OpenGL  
1.  
You may copy and distribute verbatim copies of the Program's  
source code as you receive it, in any medium, provided that  
you conspicuously and appropriately publish on each copy an  
appropriate copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this License and to the absence  
of any warranty; and give any other recipients of the Program a  
copy of this License along with the Program.You may charge a fee  
for the physical act of transferring a copy, and you may at your  
option offer warranty protection in exchange for a fee.  
GPL  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA  
Everyone is permitted to copy and distribute verbatim copies of this  
license document, but changing it is not allowed.  
Preamble  
2.  
You may modify your copy or copies of the Program or any  
portion of it, thus forming a work based on the Program, and  
copy and distribute such modifications or work under the terms  
of Section 1 above, provided that you also meet all of these  
conditions:  
The licenses for most software are designed to take away your freedom  
to share and change it. By contrast, the GNU General Public License is  
intended to guarantee your freedom to share and change free software  
to make sure the software is free for all its users. This General Public  
License applies to most of the Free Software Foundation's software  
and to any other program whose authors commit to using it. (Some  
other Free Software Foundation software is covered by the GNU Lesser  
General Public License instead.)You can apply it to your programs, too.  
a)You must cause the modified files to carry prominent notices  
stating that you changed the files and the date of any change.  
b)You must cause any work that you distribute or publish, that in  
whole or in part contains or is derived from the Program or  
any part thereof, to be licensed as a whole at no charge to all  
third parties under the terms of this License.  
When we speak of free software, we are referring to freedom, not price.  
Our General Public Licenses are designed to make sure that you have the  
freedom to distribute copies of free software (and charge for this service  
if you wish), that you receive source code or can get it if you want it, that  
you can change the software or use pieces of it in new free programs;and  
that you know you can do these things.  
c) If the modified program normally reads commands interactively  
when run, you must cause it, when started running for such  
interactive use in the most ordinary way, to print or display an  
announcement including an appropriate copyright notice and a  
notice that there is no warranty (or else,saying that you provide  
a warranty) and that users may redistribute the program under  
these conditions, and telling the user how to view a copy of this  
License. (Exception: if the Program itself is interactive but does  
not normally print such an announcement, your work based on  
the Program is not required to print an announcement.)  
To protect your rights, we need to make restrictions that forbid anyone  
to deny you these rights or to ask you to surrender the rights. These  
restrictions translate to certain responsibilities for you if you distribute  
copies of the software, or if you modify it. For example, if you distribute  
copies of such a program, whether gratis or for a fee, you must give the  
recipients all the rights that you have.You must make sure that they, too,  
receive or can get the source code. And you must show them these  
terms so they know their rights.  
These requirements apply to the modified work as a whole.  
If identifiable sections of that work are not derived from the  
Program, and can be reasonably considered independent and  
separate works in themselves, then this License, and its terms, do  
not apply to those sections when you distribute them as separate  
works. But when you distribute the same sections as part of a  
whole which is a work based on the Program, the distribution of  
the whole must be on the terms of this License,whose permissions  
for other licensees extend to the entire whole, and thus to each  
and every part regardless of who wrote it.  
We protect your rights with two steps:(1) copyright the software, and (2)  
offer you this license which gives you legal permission to copy, distribute  
and/or modifythe software.  
Also, for each author's protection and ours, we want to make certain that  
everyone understands that there is no warranty for this free software. If  
the software is modified by someone else and passed on, we want its  
recipients to know that what they have is not the original, so that any  
problems introduced by others will not reflect on the original authors'  
reputations.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is  
to exercise the right to control the distribution of derivative or  
collective works based on the Program.  
Finally, any free program is threatened constantly by software patents.  
We wish to avoid the danger that redistributors of a free program  
will individually obtain patent licenses, in effect making the program  
proprietary To prevent this, we have made it clear that any patent must  
be licensed for everyone's free use or not licensed at all.  
In addition, mere aggregation of another work not based on  
the Program with the Program (or with a work based on the  
Program) on a volume of a storage or distribution medium does  
not bring the other work under the scope of this License.  
The precise terms and conditions for copying, distribution and  
modification follow.  
ii  
3.  
You may copy and distribute the Program (or a work based on  
it, under Section 2) in object code or executable form under the  
terms of Sections 1 and 2 above provided that you also do one of  
the following:  
could satisfy both it and this License would be to refrain entirely  
from distribution of the Program.  
If any portion of this section is held invalid or unenforceable under  
any particular circumstance, the balance of the section is intended  
to apply and the section as a whole is intended to apply in other  
circumstances.  
a) Accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the  
terms of Sections 1 and 2 above on a medium customarily used  
for software interchange; or,  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of  
any such claims; this section has the sole purpose of protecting  
the integrity of the free software distribution system, which is  
implemented by public license practices. Many people have made  
generous contributions to the wide range of software distributed  
through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing  
to distribute software through any other system and a licensee  
cannot impose that choice.  
b) Accompany it with a written offer, valid for at least three  
years, to give any third party, for a charge no more than your  
cost of physically performing source distribution, a complete  
machine-readable copy of the corresponding source code, to  
be distributed under the terms of Sections 1 and 2 above on a  
medium customarily used for software interchange; or,  
c) Accompany it with the information you received as to the offer  
to distribute corresponding source code. (This alternative is  
allowed only for noncommercial distribution and only if you  
received the program in object code or executable form with  
such an offer, in accord with Subsection b above.)  
This section is intended to make thoroughly clear what is believed  
to be a consequence of the rest of this License.  
8.  
9.  
If the distribution and/or use of the Program is restricted in  
certain countries either by patents or by copyrighted interfaces,  
the original copyright holder who places the Program under this  
License may add an explicit geographical distribution limitation  
excluding those countries, so that distribution is permitted only in  
or among countries not thus excluded. In such case, this License  
incorporates the limitation as if written in the body of this License.  
The source code for a work means the preferred form of the work  
for making modifications to it. For an executable work, complete  
source code means all the source code for all modules it contains,  
plus any associated interface definition files,plus the scripts used to  
control compilation and installation of the executable. However, as  
a special exception, the source code distributed need not include  
anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on)  
of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
The Free Software Foundation may publish revised and/or new  
versions of the General Public License from time to time. Such  
new versions will be similar in spirit to the present version, but  
may differ in detail to address new problems or concerns.  
If distribution of executable or object code is made by offering  
access to copy from a designated place, then offering equivalent  
access to copy the source code from the same place counts as  
distribution of the source code, even though third parties are not  
compelled to copy the source along with the object code.  
Each version is given a distinguishing version number. If the  
Program specifies a version number of this License which applies  
to it and “any later version”, you have the option of following the  
terms and conditions either of that version or of any later version  
published by the Free Software Foundation. If the Program does  
not specify a version number of this License, you may choose any  
version ever published by the Free Software Foundation.  
4.  
5.  
You may not copy, modify, sublicense, or distribute the Program  
except as expressly provided under this License. Any attempt  
otherwise to copy, modify, sublicense or distribute the Program  
is void, and will automatically terminate your rights under this  
License. However, parties who have received copies, or rights,  
from you under this License will not have their licenses terminated  
so long as such parties remain in full compliance.  
10.  
If you wish to incorporate parts of the Program into other free  
programs whose distribution conditions are different, write to the  
author to ask for permission. For software which is copyrighted  
by the Free Software Foundation, write to the Free Software  
Foundation; we sometimes make exceptions for this. Our decision  
will be guided by the two goals of preserving the free status of all  
derivatives of our free software and of promoting the sharing and  
reuse of software generally.  
You are not required to accept this License, since you have not  
signed it. However, nothing else grants you permission to modify  
or distribute the Program or its derivative works. These actions  
are prohibited by law if you do not accept this License.Therefore,  
by modifying or distributing the Program (or any work based on  
the Program), you indicate your acceptance of this License to do  
so, and all its terms and conditions for copying, distributing or  
modifying the Program or works based on it.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE  
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT  
HOLDERSAND/OROTHERPARTIESPROVIDETHEPROGRAM  
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS  
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM  
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE,  
YOU ASSUME THE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION.  
6.  
7.  
Each time you redistribute the Program (or any work based on  
the Program), the recipient automatically receives a license from  
the original licensor to copy, distribute or modify the Program  
subject to these terms and conditions. You may not impose  
any further restrictions on the recipients' exercise of the rights  
granted herein.You are not responsible for enforcing compliance  
by third parties to this License.  
If, as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent  
issues), conditions are imposed on you (whether by court order,  
agreement or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously  
your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the  
Program at all. For example, if a patent license would not permit  
royalty-free redistribution of the Program by all those who receive  
copies directly or indirectly through you, then the only way you  
12.  
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW  
OR AGREED TO IN WRITING WILL ANY COPYRIGHT  
HOLDER, OR ANY OTHER PARTYWHO MAY MODIFY AND/  
OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE,  
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR INABILITY TO  
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO  
LOSS OF DATA OR DATA BEING RENDERED INACCURATE  
iii  
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR  
A FAILURE OF THE PROGRAM TO OPERATE WITH ANY  
OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER  
PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
LGPL  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foundation, Inc.  
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA  
END OFTERMS AND CONDITIONS  
How to ApplyTheseTerms toYour New Programs  
Everyone is permitted to copy and distribute verbatim copies of this  
license document, but changing it is not allowed.  
If you develop a new program, and you want it to be of the greatest  
possible use to the public, the best way to achieve this is to make it  
free software which everyone can redistribute and change under these  
terms.To do so, attach the following notices to the program. It is safest to  
attach them to the start of each source file to most effectively convey the  
exclusion of warranty;and each file should have at least the “copyright”  
line and a pointer to where the full notice is found.  
[This is the first released version of the Lesser GPL. It also counts as  
the successor of the GNU Library Public License, version 2, hence the  
version number 2.1.]  
Preamble  
The licenses for most software are designed to take away your freedom  
to share and change it. By contrast, the GNU General Public Licenses are  
intended to guarantee your freedom to share and change free software  
to make sure the software is free for all its users.  
one line to give the program's name and an idea of what it does.  
Copyright (C) yyyy name of author  
This program is free software; you can redistribute it and/or modify it  
under the terms of the GNU General Public License as published by the  
Free Software Foundation; either version 2 of the License, or (at your  
option) any later version.  
This license, the Lesser General Public License, applies to some specially  
designated software packages--typically libraries--of the Free Software  
Foundation and other authors who decide to use it.You can use it too,  
but we suggest you first think carefully about whether this license or  
the ordinary General Public License is the better strategy to use in any  
particular case, based on the explanations below.  
This program is distributed in the hope that it will be useful, but  
WITHOUT ANY WARRANTY; without even the implied warranty of  
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See  
the GNU General Public License for more details.  
When we speak of free software, we are referring to freedom of use,  
not price. Our General Public Licenses are designed to make sure that  
you have the freedom to distribute copies of free software (and charge  
for this service if you wish); that you receive source code or can get it if  
you want it; that you can change the software and use pieces of it in new  
free programs; and that you are informed that you can do these things.  
You should have received a copy of the GNU General Public License  
along with this program; if not, write to the Free Software Foundation,  
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.  
Also add information on how to contact you by electronic and paper  
mail.  
To protect your rights, we need to make restrictions that forbid  
distributors to deny you these rights or to ask you to surrender these  
rights.These restrictions translate to certain responsibilities for you if you  
distribute copies of the library or if you modify it.  
If the program is interactive, make it output a short notice like this when  
it starts in an interactive mode:  
Gnomovision version 69, Copyright (C) year name of author  
For example, if you distribute copies of the library, whether gratis or for a  
fee, you must give the recipients all the rights that we gave you.You must  
make sure that they, too, receive or can get the source code. If you link  
other code with the library, you must provide complete object files to  
the recipients, so that they can relink them with the library after making  
changes to the library and recompiling it.And you must show them these  
terms so they know their rights.  
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details  
type ‘show w’.This is free software, and you are welcome to redistribute  
it under certain conditions; type ‘show c’ for details.  
The hypothetical commands ‘show w’ and ‘show c’ should show the  
appropriate parts of the General Public License.Of course,the commands  
you use may be called something other than ‘show w’ and ‘show c’; they  
could even be mouse-clicks or menu items--whatever suits your program.  
We protect your rights with a two-step method: (1) we copyright the  
library, and (2) we offer you this license, which gives you legal permission  
to copy, distribute and/or modify the library.  
You should also get your employer (if you work as a programmer) or  
your school, if any, to sign a “copyright disclaimer” for the program, if  
necessary.  
To protect each distributor, we want to make it very clear that there is no  
warranty for the free library. Also, if the library is modified by someone  
else and passed on, the recipients should know that what they have is not  
the original version, so that the original author's reputation will not be  
affected by problems that might be introduced by others.  
Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright interest in the program  
‘Gnomovision’ (which makes passes at compilers) written by James  
Hacker.  
Finally, software patents pose a constant threat to the existence of any  
free program. We wish to make sure that a company cannot effectively  
restrict the users of a free program by obtaining a restrictive license from  
a patent holder.Therefore, we insist that any patent license obtained for  
a version of the library must be consistent with the full freedom of use  
specified in this license.  
signature ofTy Coon, 1 April 1989  
Ty Coon, President ofVice  
This General Public License does not permit incorporating your program  
into proprietary programs. If your program is a subroutine library, you  
may consider it more useful to permit linking proprietary applications  
with the library. If this is what you want to do, use the GNU Lesser  
General Public License instead of this License.  
Most GNU software, including some libraries, is covered by the ordinary  
GNU General Public License. This license, the GNU Lesser General  
Public License, applies to certain designated libraries, and is quite different  
from the ordinary General Public License.We use this license for certain  
libraries in order to permit linking those libraries into non-free programs.  
If you are interested in obtaining GPL source code used in this product,  
please contact  
Open Source Team, P&F USA, Inc.,PO Box 2248, Alpharetta, GA 30023-  
2248.  
When a program is linked with a library, whether statically or using a  
shared library, the combination of the two is legally speaking a combined  
work, a derivative of the original library. The ordinary General Public  
License therefore permits such linking only if the entire combination fits  
iv  
its criteria of freedom.The Lesser General Public License permits more  
lax criteria for linking other code with the library.  
1.  
You may copy and distribute verbatim copies of the Library's  
complete source code as you receive it, in any medium, provided  
that you conspicuously and appropriately publish on each copy  
an appropriate copyright notice and disclaimer of warranty; keep  
intact all the notices that refer to this License and to the absence  
of any warranty; and distribute a copy of this License along with  
the Library.  
We call this license the “Lesser” General Public License because it does  
Less to protect the user's freedom than the ordinary General Public  
License. It also provides other free software developers Less of an  
advantage over competing non-free programs. These disadvantages are  
the reason we use the ordinary General Public License for many libraries.  
However, the Lesser license provides advantages in certain special  
circumstances.  
You may charge a fee for the physical act of transferring a copy,  
and you may at your option offer warranty protection in exchange  
for a fee.  
For example,on rare occasions,there may be a special need to encourage  
the widest possible use of a certain library, so that it becomes a de-facto  
standard.To achieve this, non-free programs must be allowed to use the  
library. A more frequent case is that a free library does the same job as  
widely used non-free libraries. In this case, there is little to gain by limiting  
the free library to free software only, so we use the Lesser General Public  
License.  
2.  
You may modify your copy or copies of the Library or any portion  
of it, thus forming a work based on the Library, and copy and  
distribute such modifications or work under the terms of Section  
1 above, provided that you also meet all of these conditions:  
a)The modified work must itself be a software library.  
b) You must cause the files modified to carry prominent notices  
stating that you changed the files and the date of any change.  
In other cases, permission to use a particular library in non-free programs  
enables a greater number of people to use a large body of free software.  
For example, permission to use the GNU C Library in non-free programs  
enables many more people to use the whole GNU operating system, as  
well as its variant, the GNU/Linux operating system.  
c)You must cause the whole of the work to be licensed at no  
charge to all third parties under the terms of this License.  
d) If a facility in the modified Library refers to a function or a table  
of data to be supplied by an application program that uses  
the facility, other than as an argument passed when the facility  
is invoked, then you must make a good faith effort to ensure  
that, in the event an application does not supply such function  
or table, the facility still operates, and performs whatever part  
of its purpose remains meaningful. (For example, a function  
in a library to compute square roots has a purpose that is  
entirely well-defined independent of the application.Therefore,  
Subsection 2d requires that any application-supplied function  
or table used by this function must be optional:if the application  
does not supply it, the square root function must still compute  
square roots.)  
Although the Lesser General Public License is Less protective of the users'  
freedom, it does ensure that the user of a program that is linked with the  
Library has the freedom and the wherewithal to run that program using  
a modified version of the Library.  
The precise terms and conditions for copying,distribution and modification  
follow. Pay close attention to the difference between a “work based on  
the library” and a “work that uses the library”.The former contains code  
derived from the library, whereas the latter must be combined with the  
library in order to run.  
GNU LESSER GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND  
MODIFICATION  
These requirements apply to the modified work as a whole. If  
identifiable sections of that work are not derived from the Library,  
and can be reasonably considered independent and separate  
works in themselves, then this License, and its terms, do not apply  
to those sections when you distribute them as separate works.  
But when you distribute the same sections as part of a whole  
which is a work based on the Library, the distribution of the whole  
must be on the terms of this License, whose permissions for other  
licensees extend to the entire whole, and thus to each and every  
part regardless of who wrote it.  
0.  
This License Agreement applies to any software library or other  
program which contains a notice placed by the copyright holder  
or other authorized party saying it may be distributed under  
the terms of this Lesser General Public License (also called “this  
License”). Each licensee is addressed as “you”.  
A “library” means a collection of software functions and/or  
data prepared so as to be conveniently linked with application  
programs (which use some of those functions and data) to form  
executables.  
Thus, it is not the intent of this section to claim rights or contest  
your rights to work written entirely by you; rather, the intent is  
to exercise the right to control the distribution of derivative or  
collective works based on the Library.  
The “Library”, below, refers to any such software library or work  
which has been distributed under these terms. A “work based  
on the Library” means either the Library or any derivative  
work under copyright law: that is to say, a work containing the  
Library or a portion of it, either verbatim or with modifications  
and/or translated straightforwardly into another language.  
(Hereinafter, translation is included without limitation in the term  
“modification”.)  
In addition, mere aggregation of another work not based on the  
Library with the Library (or with a work based on the Library) on  
a volume of a storage or distribution medium does not bring the  
other work under the scope of this License.  
3.  
You may opt to apply the terms of the ordinary GNU General  
Public License instead of this License to a given copy of the  
Library.To do this, you must alter all the notices that refer to this  
License, so that they refer to the ordinary GNU General Public  
License, version 2, instead of to this License. (If a newer version  
than version 2 of the ordinary GNU General Public License has  
appeared, then you can specify that version instead if you wish.)  
Do not make any other change in these notices.  
“Source code” for a work means the preferred form of the work  
for making modifications to it. For a library, complete source code  
means all the source code for all modules it contains, plus any  
associated interface definition files, plus the scripts used to control  
compilation and installation of the library.  
Activities other than copying, distribution and modification are not  
covered by this License; they are outside its scope. The act of  
running a program using the Library is not restricted, and output  
from such a program is covered only if its contents constitute a  
work based on the Library (independent of the use of the Library  
in a tool for writing it).Whether that is true depends on what the  
Library does and what the program that uses the Library does.  
Once this change is made in a given copy, it is irreversible for that  
copy, so the ordinary GNU General Public License applies to all  
subsequent copies and derivative works made from that copy.  
This option is useful when you wish to copy part of the code of  
the Library into a program that is not a library.  
v
4.  
You may copy and distribute the Library (or a portion or  
derivative of it, under Section 2) in object code or executable  
form under the terms of Sections 1 and 2 above provided that  
you accompany it with the complete corresponding machine-  
readable source code, which must be distributed under the terms  
of Sections 1 and 2 above on a medium customarily used for  
software interchange.  
b) Use a suitable shared library mechanism for linking with the  
Library. A suitable mechanism is one that (1) uses at run time  
a copy of the library already present on the user's computer  
system,rather than copying library functions into the executable,  
and (2) will operate properly with a modified version of the  
library, if the user installs one, as long as the modified version is  
interface-compatible with the version that the work was made  
with.  
If distribution of object code is made by offering access to copy  
from a designated place, then offering equivalent access to copy  
the source code from the same place satisfies the requirement  
to distribute the source code, even though third parties are not  
compelled to copy the source along with the object code.  
c) Accompany the work with a written offer, valid for at least  
three years, to give the same user the materials specified in  
Subsection 6a, above, for a charge no more than the cost of  
performing this distribution.  
5.  
A program that contains no derivative of any portion of the Library,  
but is designed to work with the Library by being compiled or  
linked with it, is called a “work that uses the Library”. Such a work,  
in isolation, is not a derivative work of the Library, and therefore  
falls outside the scope of this License.  
d) If distribution of the work is made by offering access to copy  
from a designated place, offer equivalent access to copy the  
above specified materials from the same place.  
e)Verify that the user has already received a copy of these  
materials or that you have already sent this user a copy.  
However, linking a “work that uses the Library” with the Library  
creates an executable that is a derivative of the Library (because  
it contains portions of the Library), rather than a “work that uses  
the library”.The executable is therefore covered by this License.  
Section 6 states terms for distribution of such executables.  
For an executable, the required form of the “work that uses  
the Library” must include any data and utility programs needed  
for reproducing the executable from it. However, as a special  
exception, the materials to be distributed need not include  
anything that is normally distributed (in either source or binary  
form) with the major components (compiler, kernel, and so on)  
of the operating system on which the executable runs, unless that  
component itself accompanies the executable.  
When a “work that uses the Library” uses material from a header  
file that is part of the Library, the object code for the work may  
be a derivative work of the Library even though the source code  
is not.Whether this is true is especially significant if the work can  
be linked without the Library, or if the work is itself a library.The  
threshold for this to be true is not precisely defined by law.  
It may happen that this requirement contradicts the license  
restrictions of other proprietary libraries that do not normally  
accompany the operating system. Such a contradiction means you  
cannot use both them and the Library together in an executable  
that you distribute.  
If such an object file uses only numerical parameters, data  
structure layouts and accessors, and small macros and small inline  
functions (ten lines or less in length), then the use of the object  
file is unrestricted, regardless of whether it is legally a derivative  
work. (Executables containing this object code plus portions of  
the Library will still fall under Section 6.)  
7.  
You may place library facilities that are a work based on the  
Library side-by-side in a single library together with other  
library facilities not covered by this License, and distribute such  
a combined library, provided that the separate distribution of the  
work based on the Library and of the other library facilities is  
otherwise permitted, and provided that you do these two things:  
Otherwise, if the work is a derivative of the Library, you may  
distribute the object code for the work under the terms of  
Section 6. Any executables containing that work also fall under  
Section 6, whether or not they are linked directly with the Library  
itself.  
a) Accompany the combined library with a copy of the same  
work based on the Library, uncombined with any other library  
facilities. This must be distributed under the terms of the  
Sections above.  
6.  
As an exception to the Sections above, you may also combine or  
link a “work that uses the Library” with the Library to produce  
a work containing portions of the Library, and distribute that  
work under terms of your choice, provided that the terms permit  
modification of the work for the customer's own use and reverse  
engineering for debugging such modifications.  
b) Give prominent notice with the combined library of the fact  
that part of it is a work based on the Library, and explaining  
where to find the accompanying uncombined form of the  
same work.  
8.  
You may not copy, modify, sublicense, link with, or distribute  
the Library except as expressly provided under this License.  
Any attempt otherwise to copy, modify, sublicense, link with, or  
distribute the Library is void, and will automatically terminate your  
rights under this License. However, parties who have received  
copies, or rights, from you under this License will not have  
their licenses terminated so long as such parties remain in full  
compliance.  
You must give prominent notice with each copy of the work  
that the Library is used in it and that the Library and its use are  
covered by this License.You must supply a copy of this License.  
If the work during execution displays copyright notices, you must  
include the copyright notice for the Library among them, as well  
as a reference directing the user to the copy of this License. Also,  
you must do one of these things:  
a) Accompany the work with the complete corresponding  
machine-readable source code for the Library including  
whatever changes were used in the work (which must be  
distributed under Sections 1 and 2 above); and, if the work  
is an executable linked with the Library, with the complete  
machine-readable “work that uses the Library”, as object code  
and/or source code, so that the user can modify the Library  
and then relink to produce a modified executable containing  
the modified Library. (It is understood that the user who  
changes the contents of definitions files in the Library will not  
necessarily be able to recompile the application to use the  
modified definitions.)  
9.  
You are not required to accept this License, since you have not  
signed it. However, nothing else grants you permission to modify  
or distribute the Library or its derivative works.These actions are  
prohibited by law if you do not accept this License.Therefore, by  
modifying or distributing the Library (or any work based on the  
Library), you indicate your acceptance of this License to do so, and  
all its terms and conditions for copying, distributing or modifying  
the Library or works based on it.  
10.  
Each time you redistribute the Library (or any work based on the  
Library), the recipient automatically receives a license from the  
original licensor to copy, distribute, link with or modify the Library  
vi  
subject to these terms and conditions. You may not impose  
any further restrictions on the recipients' exercise of the rights  
granted herein.You are not responsible for enforcing compliance  
by third parties with this License.  
“AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER  
EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITEDTO,  
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE.THE ENTIRE RISK AS  
TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS  
WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE,YOU  
ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR  
OR CORRECTION.  
11.  
If, as a consequence of a court judgment or allegation of patent  
infringement or for any other reason (not limited to patent  
issues), conditions are imposed on you (whether by court order,  
agreement or otherwise) that contradict the conditions of this  
License, they do not excuse you from the conditions of this  
License. If you cannot distribute so as to satisfy simultaneously  
your obligations under this License and any other pertinent  
obligations, then as a consequence you may not distribute the  
Library at all. For example, if a patent license would not permit  
royalty-free redistribution of the Library by all those who receive  
copies directly or indirectly through you, then the only way you  
could satisfy both it and this License would be to refrain entirely  
from distribution of the Library.  
16.  
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW  
OR AGREED TO IN WRITING WILL ANY COPYRIGHT  
HOLDER, OR ANY OTHER PARTYWHO MAY MODIFY AND/  
OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE,  
BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY  
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL  
DAMAGES ARISING OUT OF THE USE OR INABILITY TO  
USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO  
LOSS OF DATA OR DATA BEING RENDERED INACCURATE  
OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A  
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER  
SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY AS  
BEEN ADVISED OFTHE POSSIBILITY OF SUCH DAMAGES.  
If any portion of this section is held invalid or unenforceable under  
any particular circumstance, the balance of the section is intended  
to apply, and the section as a whole is intended to apply in other  
circumstances.  
END OFTERMS AND CONDITIONS  
It is not the purpose of this section to induce you to infringe any  
patents or other property right claims or to contest validity of  
any such claims; this section has the sole purpose of protecting  
the integrity of the free software distribution system which is  
implemented by public license practices. Many people have made  
generous contributions to the wide range of software distributed  
through that system in reliance on consistent application of that  
system; it is up to the author/donor to decide if he or she is willing  
to distribute software through any other system and a licensee  
cannot impose that choice.  
How to ApplyTheseTerms toYour New Libraries  
If you develop a new library, and you want it to be of the greatest possible  
use to the public, we recommend making it free software that everyone  
can redistribute and change.You can do so by permitting redistribution  
under these terms (or, alternatively, under the terms of the ordinary  
General Public License).  
To apply these terms, attach the following notices to the library. It is  
safest to attach them to the start of each source file to most effectively  
convey the exclusion of warranty; and each file should have at least the  
“copyright” line and a pointer to where the full notice is found.  
This section is intended to make thoroughly clear what is believed  
to be a consequence of the rest of this License.  
<one line to give the library's name and a brief idea of what it does.>  
Copyright (C) <year> <name of author>  
12.  
13.  
If the distribution and/or use of the Library is restricted in  
certain countries either by patents or by copyrighted interfaces,  
the original copyright holder who places the Library under this  
License may add an explicit geographical distribution limitation  
excluding those countries, so that distribution is permitted only in  
or among countries not thus excluded. In such case, this License  
incorporates the limitation as if written in the body of this License.  
This library is free software; you can redistribute it and/or modify it under  
the terms of the GNU Lesser General Public License as published by the  
Free Software Foundation; either version 2.1 of the License, or (at your  
option) any later version.This library is distributed in the hope that it will  
be useful, but WITHOUT ANY WARRANTY; without even the implied  
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  
PURPOSE. See the GNU Lesser General Public License for more details.  
The Free Software Foundation may publish revised and/or new  
versions of the Lesser General Public License from time to time.  
Such new versions will be similar in spirit to the present version,  
but may differ in detail to address new problems or concerns.  
You should have received a copy of the GNU Lesser General Public  
License along with this library; if not, write to the Free Software  
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  
USA  
Each version is given a distinguishing version number. If the Library  
specifies a version number of this License which applies to it and  
“any later version”, you have the option of following the terms  
and conditions either of that version or of any later version  
published by the Free Software Foundation. If the Library does  
not specify a license version number, you may choose any version  
ever published by the Free Software Foundation.  
Also add information on how to contact you by electronic and paper  
mail.  
You should also get your employer (if you work as a programmer) or your  
school, if any, to sign a “copyright disclaimer” for the library, if necessary.  
Here is a sample; alter the names:  
14.  
If you wish to incorporate parts of the Library into other free  
programs whose distribution conditions are incompatible with  
these, write to the author to ask for permission. For software  
which is copyrighted by the Free Software Foundation, write to  
the Free Software Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two goals of preserving  
the free status of all derivatives of our free software and of  
promoting the sharing and reuse of software generally.  
Yoyodyne, Inc., hereby disclaims all copyright interest in the library `Frob'  
(a library for tweaking knobs) written by James Random Hacker.  
<signature ofTy Coon>, 1 April 1990  
Ty Coon, President ofVice  
That's all there is to it!  
If you are interested in obtaining GPL source code used in this product,  
please contact Open Source Team, P&F USA, Inc.,PO Box 2248,  
Alpharetta, GA 30023-2248.  
NO WARRANTY  
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE,  
THERE IS NO WARRANTY FOR THE LIBRARY, TO THE  
EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPYRIGHT  
HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY  
vii  
the rights to use, copy, modify, merge, publish, distribute, sublicense, and/  
or sell copies of the Software, and to permit persons to whom the  
Software is furnished to do so, subject to the following conditions:  
MIT  
Expat  
The above copyright notice and this permission notice shall be included  
in all copies or substantial portions of the Software.  
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd  
and Clark Cooper  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF  
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT  
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,  
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE  
USE OR OTHER DEALINGS INTHE SOFTWARE.  
Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.  
c-ares  
Copyright 1998, 2009 by the Massachusetts Institute ofTechnology.  
Copyright (C) 2007-2009 by Daniel Stenberg  
Permission to use, copy, modify, and distribute this software and its  
documentation for any purpose and without fee is hereby granted,  
provided that the above copyright notice appear in all copies and that  
both that copyright notice and this permission notice appear in supporting  
documentation, and that the name of M.I.T. not be used in advertising  
or publicity pertaining to distribution of the software without specific,  
written prior permission. M.I.T. makes no representations about the  
suitability of this software for any purpose. It is provided “as is” without  
express or implied warranty.  
MIT/�  
cURL  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2009, Daniel Stenberg, <[email protected]>.  
All rights reserved.  
libxml2  
Permission to use, copy, modify, and distribute this software for any  
purpose with or without fee is hereby granted, provided that the above  
copyright notice and this permission notice appear in all copies.  
Copyright (C) 1998-2003 DanielVeillard. All Rights Reserved.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY  
OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS  
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF  
THIRD PARTY RIGHTS. IN NO EVENT SHALL THE AUTHORS OR  
COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR  
OTHER LIABILITY,WHETHER IN AN ACTION OF CONTRACT,TORT  
OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION  
WITHTHE SOFTWARE ORTHE USE OR OTHER DEALINGS INTHE  
SOFTWARE.  
lua  
Copyright (c) 1994-2010 Lua.org, PUC-Rio  
lua-xmlreader  
Copyright (c) 2008 A.S. Bradbury  
lua-slncrypto  
Except as contained in this notice, the name of a copyright holder shall  
not be used in advertising or otherwise to promote the sale, use or  
other dealings in this Software without prior written authorization of the  
copyright holder.  
Copyright (c) 2005 Malete Partner, Berlin, [email protected]  
giflib  
The GIFLIB distribution is Copyright (c) 1997 Eric S. Raymond  
gSOAP  
Permission is hereby granted, free of charge, to any person obtaining a  
copy of this software and associated documentation files (theSoftware”),  
to deal in the Software without restriction,including without limitation the  
rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell  
copies of the Software, and to permit persons to whom the Software is  
furnished to do so, subject to the following conditions:  
Part of the software embedded in this product is gSOAP software.  
Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van  
Engelen, Genivia inc.All Rights Reserved.  
THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED  
BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES  
The above copyright notice and this permission notice shall be included  
in all copies or substantial portions of the Software.  
OF MERCHANTABILITY AND FITNESS FOR  
A
PARTICULAR  
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,  
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS  
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY  
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGE.  
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF  
ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A  
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT  
SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR  
ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN  
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,  
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE  
USE OR OTHER DEALINGS INTHE SOFTWARE.  
Permission is hereby granted, free of charge, to any person obtaining a  
copy of this software and associated documentation files (the Software),  
to deal in the Software without restriction, including without limitation  
viii  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are  
met:  
BSD  
Copyright (c) 2003-2010, Jouni Malinen <j@w1.fi> and contributors  
All Rights Reserved.  
1.  
Redistributions of source code must retain the above copyright  
notice, this list of conditions and the following disclaimer.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are  
met:  
2.  
Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following disclaimer  
in the documentation and/or other materials provided with the  
distribution.  
1.  
Redistributions of source code must retain the above copyright  
notice, this list of conditions and the following disclaimer.  
2.  
Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following disclaimer  
in the documentation and/or other materials provided with the  
distribution.  
3.  
The name of the author may not be used to endorse or promote  
products derived from this software without specific prior written  
permission.  
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND  
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,  
INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,ORCONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND  
ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT  
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  
ARISING IN ANYWAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN  
IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.  
3.  
Neither the name(s) of the above-listed copyright holder(s) nor  
the names of its contributors may be used to endorse or promote  
products derived from this software without specific prior written  
permission.  
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS  
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED  
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL  
THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF  
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT,STRICT LIABILITY,ORTORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
FreeType  
Portions of this software are copyright (c) 2001, 2002, 2003, 2004, 2006  
The FreeType Project (www.freetype.org). All rights reserved.  
LibJPEG  
zlib/libpng License  
This software is based in part on the work of the Independent JPEG  
Group.  
zlib.h -- interface of the 'zlib' general purpose compression library version  
1.2.3, July 18th, 2005  
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler  
OpenSSL  
This software is provided 'as-is', without any express or implied warranty.  
In no event will the authors be held liable for any damages arising from  
the use of this software.  
LICENSE ISSUES  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of  
the OpenSSL License and the original SSLeay license apply to the toolkit.  
See below for the actual license texts.Actually both licenses are BSD-style  
Open Source licenses. In case of any license issues related to OpenSSL  
please contact [email protected].  
Permission is granted to anyone to use this software for any purpose,  
including commercial applications, and to alter it and redistribute it freely,  
subject to the following restrictions:  
1.  
The origin of this software must not be misrepresented; you  
must not claim that you wrote the original software. If you use  
this software in a product, an acknowledgment in the product  
documentation would be appreciated but is not required.  
OpenSSL License  
Copyright (c) 1998-2011The OpenSSL Project.All rights reserved.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are  
met:  
2.  
3.  
Altered source versions must be plainly marked as such, and must  
not be misrepresented as being the original software.  
This notice may not be removed or altered from any source  
distribution.  
1.  
Redistributions of source code must retain the above copyright  
notice, this list of conditions and the following disclaimer.  
Jean-loup Gailly  
Mark Adler  
2.  
Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following disclaimer  
in the documentation and/or other materials provided with the  
distribution.  
The data format used by the zlib library is described by RFCs (Request for  
(zlib format), rfc1951.txt (deflate format) and rfc1952.txt (gzip format).  
3.  
4.  
All advertising materials mentioning features or use of this  
software must display the following acknowledgment: “This  
product includes software developed by the OpenSSL Project for  
use in the OpenSSLToolkit. (http://www.openssl.org/)”  
xmlrpc  
The namesOpenSSLToolkitandOpenSSL Projectmust not be  
used to endorse or promote products derived from this software  
without prior written permission. For written permission, please  
contact [email protected].  
XML-RPC For C/C++ License  
Copyright (C) 2001 by First Peer, Inc. All rights reserved.  
Copyright (C) 2001 by Eric Kidd.All rights reserved.  
ix  
5.  
6.  
Products derived from this software may not be calledOpenSSL”  
nor may “OpenSSL” appear in their names without prior written  
permission of the OpenSSL Project.  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND  
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.IN  
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE  
FOR ANY DIRECT,INDIRECT,INCIDENTAL,SPECIAL,EXEMPLARY,OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF  
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT,STRICT LIABILITY,ORTORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
Redistributions of any form whatsoever must retain the following  
acknowledgment: “This product includes software developed by  
the OpenSSL Project for use in the OpenSSLToolkit (http://www.  
openssl.org/)”  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT  
``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO,THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  
ARE DISCLAIMED.IN NO EVENT SHALL THE OpenSSL PROJECT  
OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT  
OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND  
ON ANY THEORY OF LIABILITY,WHETHER IN CONTRACT, STRICT  
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)  
ARISING IN ANYWAY OUT OFTHE USE OFTHIS SOFTWARE, EVEN  
IF ADVISED OFTHE POSSIBILITY OF SUCH DAMAGE.  
The licence and distribution terms for any publically available version or  
derivative of this code cannot be changed.i.e. this code cannot simply be  
copied and put under another distribution licence  
[including the GNU Public Licence.]  
MINI� 3  
This product includes cryptographic software written by EricYoung  
Copyright (c) 1987,1997, 2006,Vrije Universiteit,Amsterdam,  
The Netherlands All rights reserved.  
This product includes software written by Tim Hudson (tjh@cryptsoft.  
com).  
Redistribution and use of the MINIX 3 operating system in source and  
binary forms, with or without modification, are permitted provided that  
the following conditions are met:  
Redistributions of source code must retain the above copyright notice,  
this list of conditions and the following disclaimer.  
Original SSLeay License  
Copyright (C) 1995-1998 EricYoung ([email protected])  
All rights reserved.  
Redistributions in binary form must reproduce the above copyright notice,  
this list of conditions and the following disclaimer in the documentation  
and/or other materials provided with the distribution.  
This package is an SSL implementation written by Eric Young (eay@  
cryptsoft.com).  
Neither the name of theVrije Universiteit nor the names of the software  
authors or contributors may be used to endorse or promote products  
derived from this software without specific prior written permission.  
The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as  
the following conditions are aheared to. The following conditions apply  
to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,  
code; not just the SSL code.The SSL documentation included with this  
distribution is covered by the same copyright terms except that the  
holder isTim Hudson ([email protected]).  
Any deviations from these conditions require written permission from  
the copyright holder in advance  
unicode  
Unicode Copyright.  
Copyright remains EricYoung's, and as such any Copyright notices in the  
code are not to be removed. If this package is used in a product, Eric  
Young should be given attribution as the author of the parts of the library  
used.This can be in the form of a textual message at program startup or  
in documentation (online or textual) provided with the package.  
1.  
2.  
Copyright c 1991-2011 Unicode, Inc. All rights reserved.  
Certain documents and files on this website contain a legend  
indicating that “Modification is permitted." Any person is hereby  
authorized, without fee, to modify such documents and files to  
create derivative works conforming to the UnicodeR Standard,  
subject toTerms and Conditions herein.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are  
met:  
3.  
Any person is hereby authorized, without fee, to view, use,  
reproduce, and distribute all documents and files solely for  
informational purposes in the creation of products supporting the  
Unicode Standard, subject to theTerms and Conditions herein.  
1.  
Redistributions of source code must retain the copyright notice,  
this list of conditions and the following disclaimer.  
2.  
Redistributions in binary form must reproduce the above  
copyright notice, this list of conditions and the following disclaimer  
in the documentation and/or other materials provided with the  
distribution.  
4.  
5.  
Further specifications of rights and restrictions pertaining to  
the use of the particular set of data files known as the Unicode  
Character Database can be found in Exhibit 1.  
3.  
4.  
All advertising materials mentioning features or use of this  
software must display the following acknowledgement: “This  
product includes cryptographic software written by Eric Young  
Each version of the Unicode Standard has further specifications  
of rights and restrictions of use. For the book editions (Unicode  
5.0 and earlier), these are found on the back of the title page.  
The online code charts carry specific restrictions. All other files,  
including online documentation of the core specification for  
Unicode 6.0 and later, are covered under these general Terms of  
Use.  
The word 'cryptographic' can be left out if the rouines from the  
library being used are not cryptographic related :-).  
If you include any Windows specific code (or a derivative thereof)  
from the apps directory (application code) you must include an  
acknowledgement:“This product includes software written byTim  
Hudson ([email protected])”  
6.  
No license is granted to "mirror" the Unicode website where a  
fee is charged for access to the "mirror" site.  
x
7.  
Modification is not permitted with respect to this document. All  
copies of this document must be verbatim.  
both that copyright notice and this permission notice appear in supporting  
documentation, and that the names of Stichting Mathematisch Centrum  
or CWI not be used in advertising or publicity pertaining to distribution  
of the software without specific, written prior permission.  
E�HIBIT 1  
UNICODE, INC. LICENSE AGREEMENT  
SOFTWARE  
-
DATA FILES AND  
STICHTING MATHEMATISCH CENTRUM DISCLAIMS ALL  
WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING  
ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,  
IN NO EVENT SHALL STICHTING MATHEMATISCH CENTRUM  
BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM  
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION  
OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
ARISING OUT OF OR IN CONNECTION WITH THE USE OR  
PERFORMANCE OFTHIS SOFTWARE.  
Unicode Data Files include all data files under the directories  
PDF online code charts under the directory  
published in the Unicode Standard or under the directories  
NOTICE TO USER: Carefully read the following legal agreement. BY  
DOWNLOADING, INSTALLING, COPYING OR OTHERWISE USING  
UNICODE INC.'S DATA FILES ("DATA FILES"), AND/OR SOFTWARE  
("SOFTWARE"), YOU UNEQUIVOCALLY ACCEPT, AND AGREE TO  
BE BOUND BY, ALL OF THE TERMS AND CONDITIONS OF THIS  
AGREEMENT. IF YOU DO NOT AGREE, DO NOT DOWNLOAD,  
INSTALL, COPY, DISTRIBUTE OR USE THE DATA FILES OR  
SOFTWARE.  
OpenGL  
Notice  
License Applicability. Except to the extent portions of this file are made  
subject to an alternative license as permitted in the SGI Free Software  
License B,Version 1.0 (the “License”), the contents of this file are subject  
only to the provisions of the License.You may not use this file except in  
compliance with the License. You may obtain a copy of the License at  
Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway,  
COPYRIGHT AND PERMISSION NOTICE  
Copyright c 1991-2011 Unicode, Inc. All rights reserved. Distributed  
MountainView, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB  
Note that, as provided in the License, the Software is distributed on  
an “AS IS” basis, with ALL EXPRESS AND IMPLIED WARRANTIES  
AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT  
LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS  
OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A  
PARTICULAR PURPOSE, AND NON-INFRINGEMENT.  
Permission is hereby granted, free of charge, to any person obtaining a  
copy of the Unicode data files and any associated documentation (the  
Data Files) or Unicode software and any associated documentation  
(the Software) to deal in the Data Files or Software without restriction,  
including without limitation the rights to use, copy, modify, merge, publish,  
distribute, and/or sell copies of the Data Files or Software, and to permit  
persons to whom the Data Files or Software are furnished to do so,  
provided that (a) the above copyright notice(s) and this permission  
notice appear with all copies of the Data Files or Software, (b) both the  
above copyright notice(s) and this permission notice appear in associated  
documentation, and (c) there is clear notice in each modified Data File or  
in the Software as well as in the documentation associated with the Data  
File(s) or Software that the data or software has been modified.  
Original Code. The Original Code is: OpenGL Sample Implementation,  
Version 1.2.1, released January 26, 2000, developed by Silicon Graphics,  
Inc.The Original Code is Copyright (c) 1991-2000 Silicon Graphics, Inc.  
Copyright in any portions created by third parties is as indicated  
elsewhere herein. All Rights Reserved.  
Additional Notice Provisions: The application programming interfaces  
established by SGI in conjunction with the Original Code are The  
OpenGL(R) Graphics System: A Specification (Version 1.2.1), released  
April 1, 1999;The OpenGL(R) Graphics System Utility Library (Version  
1.3), released November 4, 1998; and OpenGL(R) Graphics with the  
X Window System(R) (Version 1.3), released October 19, 1998. This  
software was created using the OpenGL(R) version 1.2.1 Sample  
Implementation published by SGI,but has not been independently verified  
as being compliant with the OpenGL(R) version 1.2.1 Specification. SGI  
FREE SOFTWARE LICENSE B (Version 1.1 [02/22/2000])  
THE DATA FILESAND SOFTWAREARE PROVIDED "AS IS",WITHOUT  
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING  
BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT  
OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT  
HOLDER OR HOLDERS INCLUDED INTHIS NOTICE BE LIABLE FOR  
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL  
DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM  
LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION  
OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  
ARISING OUT OF OR IN CONNECTION WITH THE USE OR  
PERFORMANCE OFTHE DATA FILES OR SOFTWARE.  
1.  
Definitions.  
1.1. “Additional Notice Provisions” means such additional provisions  
as appear in the Notice in Original Code under the heading  
“Additional Notice Provisions.”  
Except as contained in this notice, the name of a copyright holder shall  
not be used in advertising or otherwise to promote the sale, use or  
other dealings in these Data Files or Software without prior written  
authorization of the copyright holder.  
1.2. “Covered Code” means the Original Code or Modifications, or  
any combination thereof.  
1.3. “Hardware” means any physical device that accepts input,  
processes input, stores the results of processing, and/or provides  
output.  
ADPCM  
1.4. “Larger Work” means a work that combines Covered Code or  
portions thereof with code not governed by the terms of this  
License.  
Copyright 1992 by Stichting Mathematisch Centrum, Amsterdam, The  
Netherlands.  
All Rights Reserved  
1.5. “Licensable” means having the right to grant, to the maximum  
extent possible, whether at the time of the initial grant or  
subsequently acquired, any and all of the rights conveyed herein.  
Permission to use, copy, modify, and distribute this software and its  
documentation for any purpose and without fee is hereby granted,  
provided that the above copyright notice appear in all copies and that  
1.6. “License” means this document.  
xi  
1.7. “Licensed Patents” means patent claims Licensable by SGI that are  
infringed by the use or sale of Original Code or any Modifications  
provided by SGI, or any combination thereof.  
Hardware of the algorithms embodied in the Original Code or  
any Modifications provided by SGI .  
3.  
Redistributions.  
1.8. “Modifications” means any addition to or deletion from the  
substance or structure of the Original Code or any previous  
Modifications.When Covered Code is released as a series of files,  
a Modification is:  
3.1. Retention of Notice/Copy of License. The Notice set forth in  
Exhibit A, below, must be conspicuously retained or included in  
any and all redistributions of Covered Code. For distributions of  
the Covered Code in source code form, the Notice must appear  
in every file that can include a text comments field; in executable  
form, the Notice and a copy of this License must appear in related  
documentation or collateral where the Recipient’s rights relating  
to Covered Code are described.Any Additional Notice Provisions  
which actually appears in the Original Code must also be retained  
or included in any and all redistributions of Covered Code.  
A.Any addition to the contents of a file containing Original Code  
and/or addition to or deletion from the contents of a file  
containing previous Modifications.  
B.Any new file that contains any part of the Original Code or  
previous Modifications.  
1.9. “Notice” means any notice in Original Code or Covered Code, as  
required by and in compliance with this License.  
3.2. Alternative License. Provided that Recipient is in compliance  
with the terms of this License, Recipient may, so long as without  
derogation of any of SGI’s rights in and to the Original Code,  
distribute the source code and/or executable version(s) of  
Covered Code under (1) this License; (2) a license identical to  
this License but for only such changes as are necessary in order  
to clarify Recipient’s role as licensor of Modifications; and/or (3) a  
license of Recipient’s choosing, containing terms different from this  
License, provided that the license terms include this Section 3 and  
Sections 4, 6, 7, 10, 12, and 13, which terms may not be modified  
or superseded by any other terms of such license. If Recipient  
elects to use any license other than this License, Recipient must  
make it absolutely clear that any of its terms which differ from  
this License are offered by Recipient alone, and not by SGI. It is  
emphasized that this License is a limited license, and, regardless of  
the license form employed by Recipient in accordance with this  
Section 3.2, Recipient may relicense only such rights, in Original  
Code and Modifications by SGI, as it has actually been granted by  
SGI in this License.  
1.10. “Original Code” means source code of computer software code  
that is described in the source code Notice required by Exhibit  
A as Original Code, and updates and error corrections specifically  
thereto.  
1.11. “Recipient” means an individual or a legal entity exercising rights  
under, and complying with all of the terms of, this License or a  
future version of this License issued under Section 8. For legal  
entities,Recipient” includes any entity that controls, is controlled  
by, or is under common control with Recipient. For purposes of  
this definition,“control” of an entity means (a) the power, direct or  
indirect, to direct or manage such entity, or (b) ownership of fifty  
percent (50%) or more of the outstanding shares or beneficial  
ownership of such entity.  
1.12.“Recipient Patents” means patent claims Licensable by a Recipient  
that are infringed by the use or sale of Original Code or any  
Modifications provided by SGI, or any combination thereof.  
1.13.“SGI” means Silicon Graphics, Inc.  
3.3. Indemnity. Recipient hereby agrees to indemnify SGI for any  
liability incurred by SGI as a result of any such alternative license  
terms Recipient offers.  
1.14.“SGI Patents” means patent claims Licensable by SGI other than the  
Licensed Patents.  
2.  
License Grant and Restrictions.  
4.  
Termination. This License and the rights granted hereunder will  
terminate automatically if Recipient breaches any term herein and  
fails to cure such breach within 30 days thereof. Any sublicense  
to the Covered Code that is properly granted shall survive any  
termination of this License, absent termination by the terms of  
such sublicense. Provisions that, by their nature, must remain in  
effect beyond the termination of this License, shall survive.  
2.1. SGI License Grant. Subject to the terms of this License and  
any third party intellectual property claims, for the duration  
of intellectual property protections inherent in the Original  
Code, SGI hereby grants Recipient a worldwide, royalty-free,  
non-exclusive license, to do the following: (i) under copyrights  
Licensable by SGI, to reproduce, distribute, create derivative  
works from, and, to the extent applicable, display and perform the  
Original Code and/or any Modifications provided by SGI alone  
and/or as part of a Larger Work; and (ii) under any Licensable  
Patents, to make, have made, use, sell, offer for sale, import and/  
or otherwise transfer the Original Code and/or any Modifications  
provided by SGI. Recipient accepts the terms and conditions of  
this License by undertaking any of the aforementioned actions.The  
patent license shall apply to the Covered Code if, at the time any  
related Modification is added, such addition of the Modification  
causes such combination to be covered by the Licensed Patents.  
The patent license in Section 2.1(ii) shall not apply to any other  
combinations that include the Modification. No patent license is  
provided under SGI Patents for infringements of SGI Patents by  
Modifications not provided by SGI or combinations of Original  
Code and Modifications not provided by SGI. 2.2. Recipient  
License Grant. Subject to the terms of this License and any third  
party intellectual property claims, Recipient hereby grants SGI  
and any other Recipients a worldwide, royalty-free, non-exclusive  
license, under any Recipient Patents, to make, have made, use, sell,  
offer for sale, import and/or otherwise transfer the Original Code  
and/or any Modifications provided by SGI.  
5.  
No Trademark Or Other Rights.This License does not grant any  
rights to: (i) any software apart from the Covered Code, nor  
shall any other rights or licenses not expressly granted hereunder  
arise by implication, estoppel or otherwise with respect to the  
Covered Code; (ii) any trade name, trademark or service mark  
whatsoever, including without limitation any related right for  
purposes of endorsement or promotion of products derived  
from the Covered Code, without prior written permission of SGI;  
or (iii) any title to or ownership of the Original Code, which shall  
at all times remains with SGI. All rights in the Original Code not  
expressly granted under this License are reserved.  
6.  
Compliance with Laws; Non-Infringement. There are various  
worldwide laws, regulations, and executive orders applicable  
to dispositions of Covered Code, including without limitation  
export, re-export, and import control laws, regulations, and  
executive orders, of the U.S. government and other countries, and  
Recipient is reminded it is obliged to obey such laws, regulations,  
and executive orders. Recipient may not distribute Covered  
Code that (i) in any way infringes (directly or contributorily) any  
intellectual property rights of any kind of any other person or  
entity or (ii) breaches any representation or warranty, express,  
2.3. No License For Hardware Implementations.The licenses granted  
in Section 2.1 and 2.2 are not applicable to implementation in  
xii  
implied or statutory, to which, under any applicable law, it might be  
deemed to have been subject.  
effect as the original provision and the remainder of this License  
will remain in effect. This License shall be governed by and  
construed in accordance with the laws of the United States and  
the State of California as applied to agreements entered into and  
to be performed entirely within California between California  
residents. Any litigation relating to this License shall be subject to  
the exclusive jurisdiction of the Federal Courts of the Northern  
District of California (or, absent subject matter jurisdiction in such  
courts, the courts of the State of California), with venue lying  
exclusively in Santa Clara County, California, with the losing party  
responsible for costs, including without limitation, court costs and  
reasonable attorneys fees and expenses. The application of the  
United Nations Convention on Contracts for the International  
Sale of Goods is expressly excluded. Any law or regulation that  
provides that the language of a contract shall be construed against  
the drafter shall not apply to this License.  
7.  
8.  
Claims of Infringement. If Recipient learns of any third party claim  
that any disposition of Covered Code and/or functionality wholly  
or partially infringes the third party’s intellectual property rights,  
Recipient will promptly notify SGI of such claim.  
Versions of the License. SGI may publish revised and/or new  
versions of the License from time to time,each with a distinguishing  
version number. Once Covered Code has been published under  
a particular version of the License, Recipient may, for the duration  
of the license, continue to use it under the terms of that version,  
or choose to use such Covered Code under the terms of any  
subsequent version published by SGI. Subject to the provisions of  
Sections 3 and 4 of this License, only SGI may modify the terms  
applicable to Covered Code created under this License.  
9.  
DISCLAIMER OF WARRANTY. COVERED CODE IS  
PROVIDEDAS IS.ALL EXPRESS AND IMPLIEDWARRANTIES  
AND CONDITIONS ARE DISCLAIMED, INCLUDING,  
WITHOUT LIMITATION, ANY IMPLIED WARRANTIES AND  
CONDITIONS OF MERCHANTABILITY, SATISFACTORY  
QUALITY,FITNESS FORA PARTICULAR PURPOSE,AND NON-  
INFRINGEMENT. SGI ASSUMES NO RISK ASTOTHE QUALITY  
AND PERFORMANCE OF THE SOFTWARE. SHOULD  
THE SOFTWARE PROVE DEFECTIVE IN ANY RESPECT, SGI  
ASSUMES NO COST OR LIABILITY FOR SERVICING, REPAIR  
OR CORRECTION. THIS DISCLAIMER OF WARRANTY IS  
AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY  
COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT  
SUBJECTTOTHIS DISCLAIMER.  
Exhibit A  
License Applicability. Except to the extent portions of this file are made  
subject to an alternative license as permitted in the SGI Free Software  
License B,Version 1.1 (the “License”), the contents of this file are subject  
only to the provisions of the License.You may not use this file except in  
compliance with the License. You may obtain a copy of the License at  
Silicon Graphics, Inc., attn: Legal Services, 1600 Amphitheatre Parkway,  
MountainView, CA 94043-1351, or at: http://oss.sgi.com/projects/FreeB  
Note that, as provided in the License, the Software is distributed on  
an “AS IS” basis, with ALL EXPRESS AND IMPLIED WARRANTIES  
AND CONDITIONS DISCLAIMED, INCLUDING, WITHOUT  
LIMITATION, ANY IMPLIED WARRANTIES AND CONDITIONS  
OF MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A  
PARTICULAR PURPOSE, AND NON-INFRINGEMENT.  
10.  
LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES  
NOR LEGAL THEORY, WHETHER TORT (INCLUDING,  
WITHOUT LIMITATION, NEGLIGENCE OR STRICT  
LIABILITY), CONTRACT, OR OTHERWISE, SHALL SGI OR  
ANY SGI LICENSOR BE LIABLE FOR ANY DIRECT, INDIRECT,  
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES  
OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION,  
DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE,  
LOSS OF DATA, COMPUTER FAILURE OR MALFUNCTION,  
OR ANY AND ALL OTHER COMMERCIAL DAMAGES  
OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN  
INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS  
LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY  
FOR DEATH OR PERSONAL INJURY RESULTING FROM SGI’s  
NEGLIGENCETOTHE EXTENT APPLICABLE LAW PROHIBITS  
SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW  
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR  
CONSEQUENTIAL DAMAGES, SO THAT EXCLUSION AND  
LIMITATION MAY NOT APPLYTO RECIPIENT.  
Original Code.The Original Code is: [name of software, version number,  
and release date], developed by Silicon Graphics, Inc.The Original Code is  
Copyright (c) [dates of first publication, as appearing in the Notice in the  
Original Code] Silicon Graphics, Inc. Copyright in any portions created by  
third parties is as indicated elsewhere herein.All Rights Reserved.  
Additional Notice Provisions: [such additional provisions, if any, as appear  
in the Notice in the Original Code under the heading “Additional Notice  
Provisions”]  
11.  
Indemnity. Recipient shall be solely responsible for damages arising,  
directly or indirectly,out of its utilization of rights under this License.  
Recipientwilldefend,indemnifyandholdharmlessSiliconGraphics,Inc.  
fromandagainstanyloss,liability,damages,costsorexpenses(including  
thepaymentofreasonableattorneysfees)arisingoutofRecipient’suse,  
modification,reproductionanddistributionoftheCoveredCodeorout  
of any representation or warranty made by Recipient.  
12.  
13.  
U.S. Government End Users.The Covered Code is a “commercial  
item” consisting of “commercial computer software” as such  
terms are defined in title 48 of the Code of Federal Regulations  
and all U.S. Government End Users acquire only the rights set  
forth in this License and are subject to the terms of this License.  
Miscellaneous. This License represents the complete agreement  
concerning the its subject matter. If any provision of this License  
is held to be unenforceable, such provision shall be reformed so  
as to achieve as nearly as possible the same legal and economic  
P&F USA, Inc.  
PO Box 2248,Alpharetta, GA 30023-2248  
P&F Mexicana, S.A. de C.V.  
Av. La Palma No. 6, Col. San Fernando La Herradura,  
Huixquilucan Edo. de México  
C.P. 52787  
Philips and Philips Shield are used under license of  
Koninklijke Philips Electronics N.V.  
A27F5UH/A27A5UH/A2776UT  
HHHHH  

Intel Computer Hardware MPCHC5525 User Manual
Intel UPI C42 User Manual
Lenovo Computer Hardware Q190 User Manual
Microsoft Computer Hardware P2289A User Manual
Nortel Networks T7406 User Manual
Palsonic 5130TS User Manual
Philips 19A580BQ User Manual
Philips 28PW9309 User Manual
Philips 190C6FS User Manual
Philips DVDR7250H User Manual