21PT3952
L92000
3139 125 28591
USEFUL TIPS
3
•
•
Avoid heat and
direct sunlight.
Avoid direct
exposure to rain
or water.
•
DO NOT leave your TV on standby for a
prolonged period.
•
•
Switch off your TV if not in use.
This will allow the TV to be demagnetised,
giving good picture.
•
Never repair the TV yourself – get a skilled
personnel!
•
Clean the TV’s screen with a slightly damp
soft cloth ONLY WHEN NECESSARY.
Note : Do not use abrasive solvent as it can
damage the screen’s coating.
CONNECTING PERIPHERAL EQUIPMENT
4
Equipment such as VCR, Laser disc player, VCD, DVD etc. can be connected to
the video and audio (AV) sockets at the rear of the TV. Switch off mains power
of the TV and equipment before making any connection.
Connection for playback
AV 2
in
AV 1
in
Monitor
out
1. Connecting to AV sockets
You may choose to connect to AV1 in or
AV2 in sockets or both.
VIDEO
L
S-VIDEO
AUDIO
R
•
Connect the corresponding sockets of
the equipment to that of the TV.
To playback programme, select the first
AV channel (if connection is made to
sockets at AV1 in) or the second AV
channel (if connection is made to
sockets at AV2).
•
VCR
VCR
OR
OR
Note : For mono equipment, connect to
the AV1 in or AV2 in and “L” sockets
only.
Laser disc player
VCD/DVD
2. Connecting to S-Video socket
If you have a S-Video equipment,
connect to the S-Video socket for better
picture quality.
AV 2
in
AV 1
in
Monitor
out
VIDEO
L
•
Connect the corresponding socket of the
equipment to that of the TV.
S-VIDEO
AUDIO
R
•
To view playback programmes, select
the AV2 channel.
Note : Do not connect Video “in” socket
of the TV if S-Video socket is used.
VCR
CONNECTING PERIPHERAL EQUIPMENT
5
Connection for recording
AV 2
in
AV 1
in
Monitor
out
1. From the TV channel you are watching
VIDEO
L
•
Connect the corresponding sockets of
the VCR to the Monitor “out” sockets
at the rear of the TV.
S-VIDEO
AUDIO
R
VCR
2. From one VCR to another VCR
AV 2
in
AV 1
in
Monitor
out
•
Connect the sockets of the VCR which
you wish to record from to the
corresponding sockets at either AV1 or
AV2.
VIDEO
L
S-VIDEO
AUDIO
R
•
Connect the sockets of the receiving
VCR to the Monitor “out” sockets at
the rear of the TV.
VCR 1
VCR 2
FUNCTIONS OF TV CONTROLS/SOCKETS
6
6
P
V
V
7
P
In
L
VIDEO
AUDIO
5
R
L
4
1 23
1 Mains Power button
Switch mains power on or off.
2 Standby light indicator
Indicate red light when standby mode is
activated.
3 Remote sensor
Aim remote control handset at remote sensor
when operating the TV.
4 Headphone socket
5 AV “in” sockets
Connect headphone jack to socket for personal
listening.
Connect to Video “out” and Audio “out”
sockets of VCR, laser disc player, etc.
6 Volume adjustment
Adjust sound volume louder/softer. Pressing
these two buttons together will call up the
main menu. Press these two buttons again will
exit menu. Works as cursor left (
) in a menu.
) or right
(
7 Channel adjustment
Select channel in ascending/descending order.
Works as cursor up (
menu.
) or down (
) in a
FUNCTIONS OF REMOTE CONTROL
7
1. STANDBY
Switch off set temporarily to standby
mode. (The red light indicator lights
up when set is on standby mode). To
switch on set, press STANDBY or any
DIGIT button.
1
2
AV
OSD
SLEEP
2
3
2. AV
1
4
2
5
8
0
3
6
Selects the AV channels.
4
3. OSD (On-Screen Display)
–
Displays channel number and
sound transmission mode.
Allows you to exit menu from screen.
9
7
SURF
–
A/CH
SAP
5
6
7
4. DIGIT (0 - 9)
INC.
SURR.
Allows you select a channel. For a
2-digit channel number, the second
digit must be entered before the “ – “
sign disappears.
MENU
8
9
5. SURF / ALTERNATE CHANNEL
–
When surf mode is activated
through the main menu, it allows you
to select up to a maximum of 8 chan-
nels and view quickly the selected chan-
nels.
CH
A
H
10
SMART
SMART
`
–
It also allows you to alternate between
the last viewed channel and the present
channel if alternate channel mode is
activated.
6. MENU
To display or exit menu from screen.
7. CURSOR UP
Allows you to select the next item on
the menu.
8. CURSOR LEFT
Allows you to access the sub-menus
and adjust the settings.
9. VOLUME + / –
Increases / decreases volume.
10. MUTE
Mutes sound. To restore sound, press
button again.
FUNCTIONS OF REMOTE CONTROL
8
11. SLEEPTIMER
Allows you to select a time period
after which the set will switch to
standby mode automatically. You
can set the timer from OFF mode
up to a maximum of 240 minutes.
2
SLEEP
AV
OSD
11
1
4
2
5
8
0
3
6
12. SAP
Allows you to switch to stereo,
SAP (Second Audio programme) or
mono sound. You can select up to 2
different languages in simultaneous
transmission when the programme
is transmitted in SAP mode.
9
7
SURF
A/CH
SAP
12
13
INC.
SURR.
MENU
13. INCREDIBLE SURROUND
Allows you to select incredible
surround sound (enhanced stereo
sound) when transmission is stereo
mode.
14
15
16
14. CURSOR RIGHT
CH
A
H
Allows you to access the sub-menus
and adjust the settings.
SMART
SMART
`
17
18
15. CURSOR DOWN
Allows you to select the next item
on the menu.
16. CHANNEL + / –
Allows you to select channel in
ascending or descending order.
17. SMART PICTURE
Allows you to access 4 different
types of picture settings.
18. SMART SOUND
Allows you to access 4 different
types of sound settings.
INSTALLATION OF THE TV CHANNELS
Selecting the language, tuner type and automatic tuning of the
channels
9
Press button
Result on TV Screen
1. Enter main menu.
MENU
BLUE MUTE
INSTALLATION
OFF
É
❙
❙
❙
❙
❙
❙
❙
❙
BRIGHTNESSIIIII
28
18
38
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
COLOUR
IIII
❙
❙
CONTRAST
IIIIIIII
2
SLEEP
AV
OSD
2. Select INSTALLATION.
1
4
2
5
8
0
3
6
SURF
BLUE MUTE
INSTALLATION
BRIGHTNESSIIIII
A/CH
OFF
É
28
18
❙
❙
❙
❙
❙
❙
❙
❙
7
9
SURF
A/CH
❙
❙
❙
❙
❙
❙
❙
❙ ❙
COLOUR
IIII
SAP
INC.
SURR.
MENU
3. Enter INSTALLATION
menu. LANGUAGE
option is highlighted.
LANGUAGE
TUNER
ENGLISH
ANTENNA
CH
A
H
AUTO INSTALL
É
4. Select your desired
language.
SMART
SMART
`
5. Select TUNER.
LANGUAGE
TUNER
ENGLISH
ANTENNA
AUTO INSTALL
SKIP
É
É
6. Select CABLE or ANTENNA.
7. Select AUTO INSTALL.
LANGUAGE
TUNER
ENGLISH
ANTENNA
AUTO INSTALL
É
SKIP
É
MANUAL
É
8. Start automatic tuning.
After tuning is completed,
the INSTALLATION menu
will appear.
❙
❙
❙
❙
❙
❙
❙
❙
AUTO INST IIIII
28
OSD
9. Exit menu from screen.
SKIPPING OF CHANNELS
1 0
This feature allows you to skip channels which have bad or weak TV signal or
channels that you do not watch often. Note : Once a channel is skipped, you
cannot have access to it by the CH (Channel) + or – button. you can only have
access to the channel by the DIGIT (0 - 9) buttons.
INC.
SURR.
INC.
SURR.
INC.
SURR.
MENU
MENU
MENU
➠
➠
➠
LANGUAGE
TUNER
ENGLISH
ANTENNA
AUTO INSTALL
É
1. Enter main
menu.
2. Select
INSTALLATION.
3. Enter
installation mode.
Press button
Result on TV Screen
4. Press button repeatedly
TUNER
AUTO INSTALL
SKIP
MANUAL
EXTERNAL
ANTENNA
until SKIP is selected.
É
É
É
É
2
SLEEP
AV
OSD
1
4
2
5
8
0
3
6
5. Enter skip menu.
7
9
SURF
A/CH
SAP
1
4
7
2
5
8
0
3
6
9
6. Key in the channel to
be skipped.
CHANNEL
SKIP
3
NO
INC.
SURR.
MENU
CH
A
H
7. Select SKIP.
SMART
SMART
CHANNEL
SKIP
3
NO
`
8. Select YES to skip
channel.
CHANNEL
SKIP
CHANNEL
3
YES
DELETED
OSD
9. Exit menu from screen.
How to restore skipped channels
1. Repeat steps 1 to 5 as in “Skipping of Channels”.
2. Key in the channel to be restored by the DIGIT (0- 9) button.
3. Select SKIP by the button.
4. Select NO to restore channel.
5. Exit menu from screen by the
OSD
button.
FINE TUNING OF TV CHANNELS
This feature allows you to adjust the picture reception in area of weak reception.
1 1
1
2
5
8
0
INC.
SURR.
INC.
SURR.
3
6
MENU
MENU
SURF
A/CH
OFF
É
➠
➠
➠
BLUE MUTE
INSTALLATION
BRIGHTNESS
7
9
SMART
`
❙
❙
❙
❙
❙
❙
❙
❙
IIIII
28
18
SMART
❙
❙
❙
❙
❙
❙
❙
❙
❙
COLOUR
IIII
1. Select the
channel you
2. Enter main
menu.
3. Select
INSTALLATION.
want to fine-tune.
Press button
Result on TV Screen
4. Enter installation mode.
LANGUAGE
TUNER
ENGLISH
ANTENNA
2
SLEEP
AV
OSD
AUTO INSTALL
É
1
4
2
5
8
0
3
6
5. Press button repeatedly
7
9
AUTO INSTALL
SKIP
MANUAL
É
É
π
until MANUAL is selected.
SURF
A/CH
SAP
EXTERNAL
É
INC.
SURR.
MENU
CH
A
H
6. Enter fine tune menu.
SMART
SMART
`
❙
❙
❙
❙
❙
❙
❙
❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
FINE TUNE
STORE
II
8
É
7. Start fine-tuning until
desired picture and sound
is obtained.
8. Select STORE.
❙
❙
❙
❙
❙
❙
❙
❙
❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙ ❙
FINE TUNE
STORE
II
8
É
9. Store last fine-tuned status.
10. Exit menu from screen.
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
FINE TUNE
STORED
II
8
É
OSD
NAMING OF AV CHANNELS
1 2
This feature allows you to name your AV channels according to a pre-set name
list : AV, EXT, GAM, DVD, VCD, VCR or LD.
INC.
SURR.
INC.
SURR.
INC.
SURR.
MENU
MENU
MENU
LANGUAGE
TUNER
AUTO INSTALL
ENGLISH
ANTENNA
➠
➠
➠
É
1. Enter main
menu.
2. Select
INSTALLATION.
3.Enter installation
mode.
Press button
Result on TV Screen
4.Press button repeatedly until
EXTERNAL is selected.
SKIP
MANUAL
EXTERNAL
É
É
É
2
SLEEP
AV
OSD
1
4
2
5
8
0
3
6
5.Enter EXTERNAL menu.
7
9
SURF
A/CH
SAP
EXT 1
EXT 2
VCD
VCR
INC.
SURR.
MENU
CH
A
H
6.Select EXT1 or EXT2.
SMART
SMART
`
OR
OR
EXT 1
EXT 2
VCD
VCR
7.Cycle through the various
pre-set name list – (AV, EXT,
GAME, DVD, VCD, VCR and
LD) and select name for the
AV channel.
EXT 1
EXT 2
VCD
VCR
OSD
8.Exit menu from screen.
SELECTING/ADJUSTING PICTURE AND SOUND SETTING
The picture and sound menu allow you to make adjustments to the picture and
volume level.
1 3
How to do picture and sound adjustments
MENU
1. Press
button to enter main menu.
2. Use the or button to select the items in the menu.
3. Do the adjustments or activation by the
or
button.
OSD
4. Press
button to exit menu from screen.
Picture menu items Selection
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
BRIGHTNESSIIIII
28
18
❙
COLOUR
IIII
Brightness
Increase/decrease level
Increase/decrease intensity
Increase/decrease level
Increase/decrease level
Increase/decrease intensity
Choice of 3 settings
On/Off
❙
❙
CONTRAST
IIIIIIII 38
❙
❙
❙
❙
❙
❙
SHARPNESS IIIIIIII 38
Colour
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
HUE
I
21
Contrast
Sharpness
Hue
Colour Temp
Contrast Plus
Noise Reduce
4:3 Expand
❙
❙
❙
❙
❙
❙
❙ ❙ ❙ ❙ ❙ ❙
HUE
I
21
COL TEMP NORMAL
CONTRAST PLUS ON
NOISE REDUCE OFF
On/Off
4:3 EXPAND
OFF
On/Off
Colour Temp
Allows you a choice of 3 picture settings namely, NORMAL, WARM or COOL.
Contrast Plus
This feature allows you to optimise the total contrast for improved picture
clarity.
Noise Reduce
Noise Reduce feature helps you to reduce the “noise” (little dots on the
picture) from weak signal broadcast. Activating this feature makes a picture
disturbed by “noise” clearer and sharper.
4:3 Expand
4:3 Expand feature allows you to adjust picture with black bar on the top and
bottom to fill up more of the screen. It allows you to optimise the picture
display on the screen.
... SELECTING / ADJUSTING PICTURE AND SOUND SETTING
1 4
❙
❙
❙
❙
❙
❙
❙
❙
❙
VOLUME
BALANCE
TREBLE
BASS
IIIII
I
28
1
28
29
ON
Sound menu items
Volume
Selection
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
Increase/decrease level
Adjust balance level
Increase/decrease level
Increase/decrease level
On/Off
IIIII
IIIII
❙
Balance
INCR SURROUND
Treble
Bass
Incredible Surround
Ultra bass
AVL
On/Off
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
TREBLE
BASS
IIIII
IIIII
28
29
ON
ON
ON
On/Off
INCR SURROUND
ULTRA BASS
AVL
Balance
Select this feature to allow you to adjust the balance of the right and left
speakers’ sound output.
Incredible Surround
You can hear an incredible sound with extra depth and an unbelievable three-
dimensional effect that surrounds you completely without the need for
additional surround speakers.
Ultra Bass
Select this feature to enhance the bass quality of small loudspeakers. Non-
audible low-frequency signals are replaced by harmonics, making them
audible giving the impression that low-frequency signal is present.
AVL (Auto Volume Leveller)
Variation in signal conditions can result in a sudden change in volume during
commercial breaks or channel switching. Activating the Auto Volume Leveller
feature enables the volume level to remain at a standard volume level.
ACTIVATING THE CHILD LOCK
1 5
Lock feature allows you to lock channels which you want to prevent others or
your children from watching programmes you deem undesirable.
You can choose to lock up all the channels (inclusive of the 2 AV channels) or
individual channel (up to a maximum of 5 channels).
How to lock channels
Press button
Result on TV Screen
1. Enter main menu.
MENU
BLUE MUTE
INSTALLATION
BRIGHTNESS IIIII
COLOUR
OFF
É
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
28
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
IIII
18
CONTRAST
IIIIIIII
38
2
SLEEP
AV
OSD
1
4
2
5
8
0
3
6
2. Select CHILD LOCK.
AVL
OFF
OFF
É
B
A/CH
SLEEPTIMER
CHILD LOCK
CLOCK
7
9
SURF
A/CH
SAP
SURF
INC.
SURR.
MENU
3. Enter CHILD LOCK
mode.
1
4
7
2
5
8
0
3
6
9
4. Key in access code twice
to enter child lock menu.
Note : Universal access
code is 0711.
CH
A
H
SMART
SMART
ACCESS CODE
XXX-
`
5. Select CHANGE CODE.
Key in your preferred
code (4-digit) if you want
to change to a new
CHANGE CODE
CHANNEL
LOCK
XXX-
2
NO
1
4
7
2
5
8
0
3
6
9
code. If you do not want
to change code, select
CHANNEL by the
button and proceed
to step 7 to lock your
desired channels.
1
4
7
2
5
8
0
3
6
9
6. Key in the new code the
second time to confirm
change.
CONFIRM CODE XXX-
CHANNEL
LOCK
2
NO
... ACTIVATING THE CHILD LOCK
Press button
1 6
Result on TV Screen
7. Select ALL if you
choose to lock all the
channels. You can also
choose to lock
individual channel (up
to a maximum of 5).
CHANGE CODE
CHANNEL
LOCK
XXXX
ALL
NO
2
OR
AV
OSD
SLEEP
CLEAR ALL
B
1
4
2
5
8
0
3
6
7
9
SURF
A/CH
SAP
8. Select LOCK.
INC.
SURR.
MENU
CHANGE CODE
CHANNEL
LOCK
XXXX
ALL
NO
CLEAR ALL
B
CH
A
H
SMART
SMART
`
9. Select YES to activate
lock mode.
CHANGE CODE
CHANNEL
LOCK
XXXX
ALL
YES
B
CLEAR ALL
OSD
10. Exit menu from screen.
How to unlock channels
If you access any locked channel, a message “ACCESS CODE” will appear. To
bypass the lock mode, key in your personal access code.
Note : If you forget your personal access code, key in the universal code 0711
twice.
1. Repeat step 1 to 4 as in “How to lock channels”.
2. Press
button repeatedly until CLEAR ALL is selected if you want to
button to activate unlock mode.
unlock all the channels. Press
3. If you want only to unlock individual channel, select CHANNEL by the
button and key in the channel you want to unlock by the DIGIT 0 -9 button.
4. Select LOCK by the
5. Press button to select NO to activate unlock mode.
6. Exit menu from screen by the
button.
OSD
button.
ACTIVATING THE CLOCK
The Clock feature allows you to set the clock to switch to another channel at a
specified time while you are watching another channel or when the TV is on
standby mode.
1 7
Note : For the clock to function, the set must not be switched off. Once the set is
switched off, the clock is disabled.
Press button
Result on TV Screen
1. Enter main menu.
MENU
SLEEPTIMER
CHILD LOCK
CLOCK
SURF
BLUE MUTE
OFF
É
B
A/CH
OFF
2. Select CLOCK.
2
SLEEP
AV
OSD
1
4
2
5
8
0
3
6
3. Enter CLOCK menu.
1
4
7
2
5
8
0
3
6
9
4. Set clock. Key in the
time you want the clock
to start functioning. For
example, if the time is
10 : 30, key digit 1 and 0
in the hour column
7
9
SURF
A/CH
TIME
TIMER ACTIVE
CHANNEL
10:30
OFF
2
SAP
INC.
SURR.
MENU
followed by digit 3 and
0 in the minute column.
CH
A
H
SMART
SMART
`
5. Select TIMER ACTIVE.
TIME
10:30
ON
TIMER ACTIVE
CHANNEL
AT
6. Select ON to activate
2
clock.
--:--
7. Select CHANNEL.
TIME
10:30
ON
8. Select the channel you
want to switch to.
TIMER ACTIVE
CHANNEL
AT
8
--:--
9. Select AT.
1
4
7
2
5
8
0
3
6
9
10. Key in the time you
want the channel to be
switched on.
TIMER ACTIVE
CHANNEL
AT
ON
8
11:00
OSD
11. Exit from menu.
ACTIVATING THE SLEEPTIMER / BLUE MUTE
Sleeptimer feature
1 8
This feature allows you to select a time period after which the set will switch to
standby mode automatically. You can set the timer from OFF up to a maximum
of 240 minutes.
How to activate the Sleeptimer feature
Press button
Result on TV Screen
2
SLEEP
AV
OSD
1. Enter main menu.
MENU
1
4
2
5
8
0
3
6
ULTRA BASS
AVL
SLEEPTIMER
CHILD LOCK
CLOCK
ON
ON
OFF
É
2. Select SLEEPTIMER.
7
9
SURF
A/CH
SAP
B
INC.
SURR.
MENU
3. Press button repeatedly
to cycle through the time
periods and select the
desired time period.
ULTRA BASS
AVL
SLEEPTIMER
CHILD LOCK
CLOCK
ON
ON
15
É
B
CH
A
H
SMART
SMART
`
OSD
4. Exit menu from screen.
Blue Mute feature
The TV screen will turn blue when the Blue Mute feature is activated via the
main menu. It indicates that there is no signal.
How to activate the Blue Mute feature
Press button
Result on TV Screen
2
SLEEP
AV
OSD
1. Enter main menu.
1
4
2
5
8
0
3
6
MENU
CLOCK
SURF
BLUE MUTE
INSTALLATION
BRIGHTNESS IIIII
B
A/CH
OFF
É
7
9
SURF
A/CH
2. Select BLUE MUTE.
SAP
❙
❙
❙
❙
❙
❙
❙
28
INC.
SURR.
MENU
3. Select ON to activate
CH
A
H
Blue Mute feature.
CLOCK
SURF
BLUE MUTE
INSTALLATION
BRIGHTNESS IIIII
B
A/CH
ON
É
28
SMART
SMART
`
❙
❙
❙
❙
❙
❙
❙
OSD
4. Exit menu from screen.
USING THE SURF FEATURE
This feature allows you to create a surf list. You can select up to a maximum of 8
channels and view quickly the selected channels by the control handset.
1 9
How to add a channel to the surf list
Press button
Result on TV Screen
1. Enter main menu.
MENU
CHILD LOCK
CLOCK
É
B
2
SLEEP
SURF
BLUE MUTE
INSTALLATION
A/CH
OFF
B
AV
OSD
2. Select SURF.
1
4
2
5
8
0
3
6
3. Select SURF option.
7
9
CHILD LOCK
CLOCK
SURF
BLUE MUTE
INSTALLATION
É
B
SURF
OFF
B
SURF
A/CH
After selection of surf
SAP
option, exit menu from
OSD
INC.
SURR.
MENU
screen by the
button.
1
4
7
2
5
8
0
3
6
9
4. Key in the channel
number you want to add
to the surf list.
CH
A
H
8
SMART
SMART
`
SURF
5. Press button while the
channel number is still
visible. “ADDED” will
appear indicating that the
selected channel has been
added. Repeat steps 4 and
5 to add more channels to
the surf list.
A/CH
8
ADDED
How to delete a channel from the surf list
1. Select the channel you want to delete from the surf
8
DELETED
list by the DIGIT (0 - 9) button.
SURF
2. Press the
button while the channel number is
A/CH
still visible. “DELETED” will appear indicating that the
selected channel has been deleted.
3. Repeat the above step 1 to 2 if you want to delete
more channels from the surf list.
How to view channels from the Surf list
SURF
1. Press the
button repeatedly to cycle through
A/CH
the channels and select the channel you want to view.
USING THE ALTERNATE CHANNEL FEATURE
When you are viewing a channel and decide to view the previous channel, use
this feature to alternate between the two channels.
2 0
How to activate the Alternate Channel feature
Press button
Result on TV Screen
1. Enter main menu.
MENU
BLUE MUTE
INSTALLATION
OFF
É
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
❙
BRIGHTNESS IIIII
28
18
38
❙
❙
❙
❙
COLOUR
IIII
2
SLEEP
❙
❙
❙
❙
❙
CONTRAST
IIIIIIII
AV
OSD
1
4
2
5
8
0
3
6
2. Select SURF.
CHILD LOCK
CLOCK
SURF
BLUE MUTE
INSTALLATION
É
B
SURF
OFF
B
7
9
SURF
A/CH
SAP
INC.
SURR.
MENU
3. Select A/CH (Alternate
CHILD LOCK
CLOCK
SURF
BLUE MUTE
INSTALLATION
É
B
A/CH
OFF
B
CH
A
H
Channel) option.
SMART
SMART
`
OSD
4. Exit menu from screen.
SURF
5. Alternate between the
present channel and
A/CH
the previous channel.
SMART PICTURE AND SOUND
Smart Picture
2 1
Smart Picture offers you a choice of 4 settings – RICH, NATURAL, SOFT and
PERSONAL.
SMART
INC.
MENU
SURR.
`
•
Press
button repeatedly
to cycle through the 4
settings to select your
desired picture setting.
RICH
CH
A
H
SMART
SMART
`
NATURAL
SOFT
Definition of Picture Settings
RICH
: Emphasizes very vibrant colours.
(Suitable for AV mode in brightly-lit
condition)
PERSONAL
NATURAL : Emphasizes natural and original colours.
SOFT
: Emphasizes warm colours.
(Suitable for dimly-lit room condition and
gives cinema-like effect when light is
switched off)
PERSONAL : Settings are set to your preference.
Smart Sound
Smart Sound offers you a choice of 4 settings – THEATRE, MUSIC, VOICE and
PERSONAL.
INC.
SURR.
MENU
SMART
•
Press
button repeatedly
to cycle through the 4
settings to select your
desired sound setting.
THEATRE
MUSIC
CH
A
H
SMART
SMART
`
VOICE
Definition of Sound Settings
THEATRE
MUSIC
VOICE
: Emphasizes sensation to action and a
wider sound ambience.
: Emphasizes bass frequency making
the music dynamic.
: Emphasizes treble frequency making
speech clearer.
PERSONAL
PERSONAL : Settings are set to your preference.
GENERAL INFORMATION / BEFORE CALLING SERVICE
2 2
Safety
Disconnect mains plug when :
–
–
–
the red light below the TV screen is flashing continuously.
a bright white line is displayed across the TV screen.
cleaning the TV screen. Never use abrasive cleaning agents. Use a slight damp
chamois leather or soft cloth.
–
–
there is a lightning storm.
the set is left unattended for a prolonged period of time.
Before calling Service
Make these simple checks before calling for service. Some of these symptoms can
easily be rectified if you know what to do.
Symptom
What you should do
Colour patch
(uneveness)
•
•
Switch off the TV by the mains power button.
Wait for 20 minutes before switching on again.
Check the TV is not placed too near speakers or
magnetic objects
No power
•
Check the TV’s AC power cord is plugged into the
mains socket. If there is still no power, disconnect
plug. Wait for 60 seconds and re-insert plug. Switch
on the TV again.
No picture
•
•
Check the antenna connection at the rear of the TV.
Possible TV station problem. Try another channel.
Good picture but
no sound
•
•
Try increasing the volume.
Check that the sound is not muted. If it is muted,
press the
sound.
H
button on the remote control to restore
Good sound but poor
colour or no picture
•
•
•
•
Try increasing the contrast and brightness setting.
Snowish picture and
noise
Check antenna connection at the rear of the TV.
Horizontal dotted lines
Possible electrical interference e.g. hairdryer,
vacuum cleaner, etc. Switch off appliances.
Double images or
Possible poor positioning of antenna. Using a
“Ghost” images
highly directional antenna may improve reception.
TV not responding to
remote control handset
•
•
Check life span of batteries of remote control
handset.
Aim remote control handset directly at remote
control sensor lens on the TV.
Message
•
Key in your personal access code to unlock channel.
If you have forgotten your code, key in the universal
code 0711 twice. For more details, refer to section on
“How to unlock channels”.
“ACCESS CODE”
shown on TV. Cannot
access to locked channel.
SPECIFICATIONS
2 3
Picture tube size
54 cm
Picture tube visible area
Audio Output
51 cm
2 x 5 W
PLL
Tuning System
TV System
NTSC M
110V ~, 60 Hz
55 W
Operating voltage
Nominal Power Consumption
Maximum power Consumption
104 W
Set dimensions
Width
Height
600 mm
487 mm
454 mm
Depth
Nett weight of set
26 kg
|