Philips 13PR12W99 User Manual

Read this manual first!  
Congratulations on purchasing this Philips product.  
Weve included everything you need to get started.  
If you have any problems, Philips Representatives can  
help you get the most from your new product by explaining:  
• Hookups,  
First Time Setup, and  
Feature Operation.  
Do not attempt to return this product to the store.  
For fast help, call us first!  
1-800-531-0039  
Thank you for making Philips a part of your home!  
3121 235 20031  
IMPORTANT SAFETY INSTRUCTIONS  
Read before operating equipment  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
16. Damage Requiring Service - The appliance should be  
serviced by qualified service personnel when:  
A. The power supply cord or the plug has been damaged;  
or  
B. Objects have fallen, or liquid has been spilled into the  
appliance; or  
C. The appliance has been exposed to rain; or  
D. The appliance does not appear to operate normally or  
exhibits a marked change in performance; or  
E. The appliance has been dropped, or the enclosure  
damaged.  
7. Do not block any of the ventilation openings. Install in  
accordance with the manufacturers instructions.  
8. Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9. Do not defeat the safety purpose of the polarized or ground-  
ing-type plug. A polarized plug has two blades with one  
wider than the other. A grounding type plug has two blades  
and third grounding prong. The wide blade or third prong  
are provided for your safety. When the provided plug does  
not fit into your outlet, consult an electrician for replacement  
of the obsolete outlet.  
17. Tilt/Stability - All televisions must comply with recommend-  
ed international global safety standards for tilt and stability  
properties of its cabinet design.  
• Do not compromise these design standards by applying  
excessive pull force to the front, or top, of the cabinet which  
could ultimately overturn the product.  
• Also, do not endanger yourself, or children, by placing  
electronic equipment/toys on the top of the cabinet. Such  
items could unsuspectingly fall from the top of the set and  
cause product damage and/or personal injury.  
10. Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the point  
where they exit from the apparatus.  
18. Wall or Ceiling Mounting - The appliance should be  
mounted to a wall or ceiling only as recommended by the  
manufacturer.  
11. Only use attachments/accessories specified by the manu-  
facturer.  
19. Power Lines - An outdoor antenna should be located away  
12.  
Use only with a cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the app-  
aratus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid  
from power lines.  
20. Outdoor Antenna Grounding - If an outside antenna is  
connected to the receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage  
surges and built up static charges.  
injury from tip-over.  
13. Unplug this apparatus during lightning storms or when  
Section 810 of the National Electric Code, ANSI/NFPA No.  
70-1984, provides information with respect to proper  
grounding of the mats and supporting structure grounding of  
the lead-in wire to an antenna discharge unit, size of  
grounding connectors, location of antenna-discharge unit,  
connection to grounding electrodes and requirements for  
the grounding electrode. See Figure below.  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into apparatus, the  
apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
15. This product may contain lead and mercury. Disposal of  
these materials may be regulated due to environmental con-  
siderations. For disposal or recycling information, please  
contact your local authorities or the Electronic Industries  
21 Object and Liquid Entry - Care should be taken so that  
objects do not fall and liquids are not spilled into the enclo-  
sure through openings.  
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides  
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close  
to the point of cable entry as practical.  
Example of Antenna Grounding  
as per NEC - National Electric Code  
GROUND CLAMP  
ANTENNA LEAD IN WIRE  
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)  
GROUNDING CONDUCTORS (NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)  
ELECTRIC SERVICE EQUIPMENT  
3
TABLE OF CONTENTS  
Here are a few of the special features built into this new  
Color Television:  
Introduction  
Welcome/Registration of Your TV . . . . . . . . . . . . . . . . . . .2  
Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
AutoLock™ feature allows you to block the viewing of cer-  
tain channels or external audio/video connections where you  
might not want your children viewing inappropriate material.  
Getting Started  
Basic Cable TV Connection . . . . . . . . . . . . . . . . . .5  
Basic Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . .6  
Basic VCR to Television Connection . . . . . . . . . . . . . . . . .7  
Using the Front Audio/Video Inputs . . . . . . . . . . . . . . . . . .7  
Basic Television Operation . . . . . . . . . . . . . . . . . . . . . . . .8  
Basic Remote Operation . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Description of Remote Control Buttons . . . . . . . . . . . . . . .9  
Infrared Remote Control works your TV set, and allows  
you to program certain features with the press of one button.  
Standard broadcast (VHF/UHF) or Cable TV (CATV)  
channel capability.  
Closed Captioning allows the viewer to read TV program  
dialogue or voice conversations as on-screen text.  
Automatic Programming of Channels for quick and easy  
selection of favorite stations available in your area.  
Install Menu  
How to Use the Language Control . . . . . . . . . . . .10  
How to Use the Tuner Mode Control . . . . . . . . . . . . . . . .11  
How to Auto Program TV Channels . . . . . . . . . . . . . . . . .12  
How to Add or Delete Channels . . . . . . . . . . . . . . . . . . . .13  
On-screen Features (in either English or Spanish) show  
helpful messages for setting of TV controls.  
Audio/Video Jackpanel located on the front of the televi-  
sion for direct connections with a camcorder, or VCR.  
Provides quality TV picture and mono sound playback.  
Picture Menu  
How to Use the Picture Adjustment Controls . . . .14  
How to Use the DNR (Digital Noise Reduction) Control . . .15  
How to Use the Contrast + (Black Stretch) Control . . . . .16  
On Timer automatically turns the TV ON at a preset time,  
and channel.  
Sound Menu  
Sleeptimer automatically turns the TV OFF at preset times.  
How to Set the Treble Boost Control . . . . . . . . . .17  
How to Set the Bass Boost Control . . . . . . . . . . . . . . . . .17  
How to Set the AVL Control . . . . . . . . . . . . . . . . . . . . . .18  
Auto Picture™ allows you to set the picture color, tint, con-  
trast, etc. for various types of programming such as Sports,  
Movies, Personal, Weak Signal, or Multi Media with the  
push of one button.  
Let'  
Loo  
Insi  
s
k
Features Menu  
de!  
Using the Timer Controls . . . . . . . . . . . . . . . . . .19  
Auto Sound™ controls allow you to set the sound controls  
for various types of listening programs such as Personal  
(sound controls the way you set them), Theatre, Music, or  
Voice with the push of one button.  
Understanding the AutoLock Controls . . . . . . . . . . . . . . .20  
Setting Up the AutoLock Access Code . . . . . . . . . . . . . . .21  
How to Block Channels . . . . . . . . . . . . . . . . . . . . . . . . . .22  
How to Clear All Blocked Channels at the Same Time . . .23  
How to Block All Channels at the Same Time . . . . . . . . .24  
Blocking Programming Based on Movie Ratings . . . . . . .25  
BlockingProgramming Based on TV Ratings . . . . . . . . . .26  
Other AutoLock Blocking Options . . . . . . . . . . . . . . . . . .27  
How to use the Closed Captioning Control . . . . . . . . . . . .28  
Bass and Treble Boost controls to enhance the television’s  
sound.  
NOTE: It is possible that this owner's manual may be  
used with several different television models. Not all  
features (and drawings) discussed in this manual will  
necessarily match those found with your television sys-  
tem. This is normal and does not require you contact-  
ing your dealer or requesting service.  
Remote Control Use  
Setting up the Sleeptimer Option . . . . . . . . . . . . . .29  
Setting the Auto Picture Control . . . . . . . . . . . . . . .30  
Setting the Auto Sound Control . . . . . . . . . . . . . . . . . . . .31  
Using the Quadra Surf Buttons (Alternate Channel) . .32-33  
General Information  
Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . .34  
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Auto Lock™, Auto Picture™, Auto Sound™  
are all registered trademarks of Philips Consumer Electronics Company.  
Copyright © 2001 All rights reserved.  
4
HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)  
our Cable TV input into your  
Yhome may be a single (75 ohm)  
cable, or a Converter Box installa-  
tion. In either case the connection to  
the TV is very easy. Just put the  
threaded end of the cable signal to  
the TV's antenna plug and screw it  
down finger tight.  
If your Cable TV signal is a single  
round cable (75 ohm) then you're  
ready to connect to the TV.  
If you have a Cable Converter Box:  
Connect the Cable TV signal to the  
Cable Signal IN(put) plug on the  
75  
Converter.  
Connect the Cable TV cable to the  
75plug on the TV.  
If you have a Cable Converter Box:  
Connect the OUT(put) plug from the  
Converter to the 75plug on the TV.  
SMART HELP  
2
Remember: Set the TV for the  
type signal you've just connected  
(see the “Tuner Mode” section on page  
11 of this manual.)  
Cable TV Company  
75  
Cable TV Signal Input  
To select only the channel numbers on  
your Cable system see “Auto Program"  
(page 12). If you use a Cable Converter  
box, set the TV to the same channel as  
the converter's CH 3/4 switch (on the rear  
of the converter.)  
Back of TV  
OR  
O
U
T
IN  
1
Round Cable  
75Ohm  
Cable TV Converter  
Box Connection  
5
HOOKING UP YOUR TV (BASIC ANTENNA TV CONNECTIONS)  
combination antenna receives  
Anormal broadcast channels  
Note: For homes with separate UHF and VHF antennas  
you will need an optional combiner to connect to the TV.  
(VHF 2-13 and UHF 14-69). Your  
connection is easy since there is  
only one 75(ohm) antenna plug  
on the back of your TV - and thats  
U/V  
Combiner  
where the antenna goes.  
If your antenna has a round cable  
(75 ohm) on the end, then you're ready  
Back of TV  
to connect it to the TV.  
If your antenna has flat twin-lead wire  
(300 ohm), you first need to attach the  
75-300 Ohm Adapter  
antenna wires to the screws on a 300 to  
75 ohm adapter.  
Push the round end of the adapter  
(or antenna) onto the 75plug on the  
rear of the TV. If the round end of the  
antenna wire is threaded, screw it down  
finger tight.  
SMART HELP  
Remember: Be sure to set the  
TV for the type signal you've  
75  
connected (see the “Tuner Mode” sec-  
tion on page 11 of this manual.)  
To set the TV to select only the channel  
numbers in your area see how to  
“Program" or "Add" channels in the  
TV’s memory on page 12 (Auto  
Program section).  
To order any optional accessory contact  
your dealer or the Philips Parts Center  
at 1-800-851-8885.  
2
300 to 75Ω  
Adapter  
1
75  
Combination VHF/UHF  
Antenna  
(Outdoor or Indoor)  
Back of TV  
Twin Lead  
Wire  
OR  
Round Cable  
75Ω  
6
HOOKING UP YOUR TV (BASIC TV TO VCR CONNECTIONS)  
he basic Antenna, or Cable TV,  
Tto VCR to TV connection is  
shown to the right. For more infor-  
mation on other hookups (possible  
when Cable Converter/Descrambler  
boxes are included) refer to your  
accessory VCR and Cable  
Converter Owner's Manual for  
details.  
Connect your Antenna or Cable  
75  
TV signal to the IN FROM  
ANT(enna) plug on the VCR.  
Connect the OUT TO TV plug on  
the VCR to the 75plug on the TV  
(connecting cable supplied with the  
VCR.)  
2
300 to 75Ω  
Ohm Adapter  
1
Outdoor  
VHF/UHF  
Antenna  
75 ⍀  
OR  
OUT TO TV  
IN FROM ANT.  
Cable TV signal  
Back of TV  
Round Cable  
75Supplied with VCR  
FRONT A/V INPUTS  
udio and Video Front Mono inputs  
Aare available for a quick connection  
of a VCR or to playback video from a  
camera. Use the AV button on the  
Audio Cable  
Video Cable  
1
Front A/V Mono Input Jacks  
remote to tune to the Front A/V Inputs.  
ANTEN
IN  
OUT  
OUT  
VIDEO  
IN  
AUDIO  
VIDEO  
INSTALL/MENU  
2
Connect the yellow video cable from  
the Video output on the VCR/Camera to  
the Video input located on the FRONT of  
the TV.  
ANTENNA  
OUT  
AUDIO  
VOLUME +  
CHANNEL  
IN  
Connect the audio cables (red and  
white) from the Audio outputs on the  
VCR/Camera to the Audio input located on  
the front of the TV. Note: The use of the  
“Y” adapter will have to be used if the  
VCR or Camera has stereo audio outputs.  
V
ID  
E
O
A
U
D
IO  
IN  
S
T
A
LL/ME  
N
U
V
O
LUME  
+
C
H
A
N
N
E
L
Front of TV  
VCR or accessory device  
7
BASIC TV/REMOTE OPERATIONS  
TELEVISION  
7
MONO  
Press the POWER button to turn  
the TV ON.  
Note: You can also press any button on  
the front of the TV to turn the TV ON.  
Headphone Jack  
Headphones can be used with this  
television by simply plugging them  
into the headphone jack located on the  
front of the television. Sound coming  
from the headphone jack is mono.  
Press the VOLUME + button to  
increase the sound level, or the VOL-  
UME – button to lower the sound  
level.  
V
ID  
E
O
A
U
D
IO  
IN  
S
T
A
LL/ME  
N
U
V
O
LUME  
+
C
H
A
N
N
E
L
Pressing both buttons at the same  
time will display the on-screen menu.  
Once in the menu, use these button to  
make adjustments or selections.  
Remote Sensor Window  
AUDIO  
VIDEO  
INSTALL/MENU  
Press the CHANNEL UP or  
DOWN button to select TV chan-  
nels.  
VOLUME +  
CHANNEL  
REMOTE  
Front Audio/Video Inputs (Mono)  
Point the remote control toward the  
remote sensor window on the TV when  
operating the TV with the remote.  
The Front Audio/Video Input Jacks  
make it real easy to watch the playback  
of a video tape using a camcorder  
(or any accessory device) with  
Audio/Video Output Jacks.  
1
3
2
BATTERY INSTALLATION  
4
o load the supplied batteries into  
Tthe remote:  
1. Remove the battery compartment  
lid on the back of the remote.  
2. Place the batteries (2-AA) in the  
remote. Be sure the (+) and (-) ends of  
the batteries line up correctly (inside of  
case is marked.)  
L
O
V
3. Reattach the battery lid.  
Battery Lid  
SMART HELP  
Battery  
Compartment  
Remember, the tuned channel  
number will always briefly  
appear when the TV is first turned ON  
(and with channel changes.)  
2 “AA” Batteries  
You can also press the STATUS/EXIT  
button (on the remote) to see what  
channel the TV is ON.  
Bottom of Remote Shown  
8
DESCRIPTION OF REMOTE CONTROL BUTTONS  
QUADRA SURF Buttons - (Red,  
Green, Yellow, Blue) Allows you to  
store and surf up to 10 channels you  
choose for each colored button.  
POWER button - Press the Power but-  
ton to turn the TV on or off.  
A/CH Button - (Alternate Channel)  
Press to toggle between the last view  
channel and the channel presently  
being viewed.  
AV Button - Press to select an accesso-  
ry signal input from the front AV  
Inputs.  
FROWNIE Button - Allows you to  
delete stored channels within the  
“Quadra Surf” lists for the colored but-  
tons.  
SMILEY Button - Press to add chan-  
nels in the “Quadra Surf” lists. Works  
with all colored buttons.  
AUTO PICTURE Button - Press  
repeatedly to choose from 5 different  
factory pre-defined picture settings.  
Choose from Personal (how you set the  
Picture Menu adjustment controls),  
Movies (when watching movies),  
Sports (for any sporting event), Weak  
Signal (used when the signal being  
received is not the best), or Multi  
Media (for use with video gaming).  
CC Button - Press to activate the  
Closed Captioning options. Repeatedly  
press the CC button will scroll the  
options available on the TV screen.  
AUTO SOUND Button - Press repeat-  
edly to choose from different factory  
pre-defined sound settings. Choose from  
Personal (how you set the Sound Menu  
options), Voice (for programming with  
speaking only), Music (for musical type  
programs such as concerts), or Theatre  
(used when watching movies).  
VOL  
STATUS/EXIT Button - Press to dis-  
play the current channel number. If the  
on-screen menu is displayed, press the  
Status/Exit button will remove it from  
the TV’s screen.  
MENU Button - Press to display the  
on-screen menu. Also can be used to  
back out of the on-screen menu until it  
disappears from the TV’s screen.  
CURSOR  
,
,
, or Buttons -  
Press to navigate, select and adjust con-  
trols within the on-screen menu.  
VOL(ume) + or – Buttons - Press the  
VOL + button to increase the TV’s  
sound level. Press the VOL – button to  
decrease the TV’s sound level.  
CH(annel) + or – Buttons - Press to  
select channels in ascending or  
descending order.  
NUMBERED (0-9) Buttons - Press  
the numbered buttons to select TV  
channels or to enter certain values  
within the on-screen menu. For single  
channel entries, press the numbered  
button for the channel you desire. the  
TV will pause for a second or two  
before changing to the chosen channel.  
MUTE Button - Press the mute button  
to eliminate the sound being heard  
from the TV. MUTE” will be dis-  
played on the TV’s screen. Press again  
to restore the TV’s volume to it’s previ-  
ous level.  
SLEEP Button - Press the Sleep but-  
ton to set the TV to automatically turn  
itself off after a set period of time.  
Press repeatedly to select 15, 30, 45,  
60, 90, 120, 180, or 240 minutes.  
CLOCK Button - Press to display the  
“Timer” menu. Within this menu set  
the time, set the TV to tune to a certain  
channel at a certain time once, or daily.  
9
USING THE LANGUAGE CONTROL  
or our Spanish speaking TV owners  
Fan on-screen LANGUAGE option is  
present. With the LANGUAGE control  
you can set the TVs on-screen menu to  
be shown in either English or Spanish.  
Main  
Picture  
Brightness  
Color  
Press the MENU button on the  
remote to show the on-screen menu.  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Picture  
Language  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the word  
INSTALL is highlighted.  
Sound  
Features  
Install  
Tuner Mode  
Auto Program  
Channel Edit  
More...  
Press the CURSOR RIGHT ᮣ  
button to display the INSTALL menu  
features.  
Install  
Press CURSOR UP or DOWN  
buttons to scroll the Install features  
until the word LANGUAGE is high-  
lighted.  
4
2
Language  
English  
Tuner Mode  
Auto Program  
Channel Edit  
1
6
Press the CURSOR RIGHT ᮣ  
button repeatedly to select ENGLISH  
or ESPANOL (Spanish).  
3
5
OR  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
VO
2
4
Instaler  
Idioma  
Español  
Sintonia  
Auto Programa  
Editar Canal  
SMART HELP  
Remember: The Language  
control only makes the TV’s on-  
screen MENU items appear in English  
or Spanish text.  
It does not change the other on-screen  
text features such as Closed Caption  
(CC) TV shows.  
10  
HOW TO USE THE TUNER MODE CONTROL  
he TUNER MODE control allows  
Tyou to change the TVs signal input  
to either ANTENNA, CABLE or AUTO  
mode. Its important for the TV to know  
what type of signal to look for. (From a  
Cable TV signal or a normal Antenna  
signal.) In the AUTO mode, when the  
AUTO PROGRAM feature is activated,  
the TV will automatically choose the  
correct mode.  
Main  
Picture  
Brightness  
Color  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Picture  
Language  
Sound  
Features  
Install  
Tuner Mode  
Auto Program  
Channel Edit  
More...  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the word  
INSTALL is highlighted.  
Install  
4
2
Language  
English  
Press the CURSOR RIGHT ᮣ  
button to display the INSTALL menu  
features.  
Tuner Mode  
Auto Program  
Channel Edit  
Antenna  
1
6
Press CURSOR UP or DOWN  
buttons to scroll the Install features  
until the words TUNER MODE is  
highlighted.  
3
5
OR  
VO
Press the CURSOR RIGHT ᮣ  
button to select either ANTENNA,  
CABLE, or AUTO mode.  
2
4
Install  
Language  
English  
Cable  
Tuner Mode  
Auto Program  
Channel Edit  
When finished, press the STATUS  
/EXIT button to remove the on-screen  
menu from the TV’s screen.  
OR  
SMART HELP  
When CABLE is selected,  
Install  
channels 1-125 are available.  
Language  
English  
Auto  
Tuner Mode  
Auto Program  
Channel Edit  
When ANTENNA is selected, channels  
2-69 are available.  
When AUTO is selected, the TV will  
automatically set itself to the correct  
mode based on the type of signal it  
detects when the AUTO PROGRAM  
feature is activated.  
11  
HOW TO AUTOMATICALLY PROGRAM TV CHANNELS  
our TV can automatically set itself  
Yfor local area (or Cable TV) chan-  
nels. This makes it easy for you to  
select only the TV stations in your area  
when the CHANNEL (+), (–) buttons  
are pressed.  
Main  
Picture  
Brightness  
Color  
Note: Make sure the antenna or cable  
signal connection has been completed  
before AUTO PROGRAM is activated.  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Sound  
Picture  
Language  
Features  
Install  
Tuner Mode  
More...  
Auto Program  
Channel Edit  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the word  
INSTALL is highlighted.  
Install  
4
2
Press the CURSOR RIGHT ᮣ  
button to display the INSTALL menu  
features.  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
1
6
Press CURSOR UP or DOWN  
buttons to scroll the Install features  
until the words AUTO PROGRAM are  
highlighted.  
3
5
VO
Press the CURSOR RIGHT ᮣ  
button to start the Auto Program scan-  
ning of channels. Auto Programming  
will store all available channels in the  
TV’s memory then tune to the lowest  
available channel when done.  
2
Auto Program  
Channel  
4
12  
13  
Auto Program  
Channel  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
Auto Program  
Channel  
14  
SMART HELP  
Try it out. Press the CHAN-  
NEL (+), (–) buttons and see  
which channels have been added to the  
TV’s memory.  
If you want to delete any unwanted chan-  
nels from the TV’s memory, refer to the  
section on adding and deleting channels  
(Channel Edit) on the next page.  
12  
HOW TO ADD OR DELETE TV CHANNELS  
hannel Edit makes it easy for you  
Cto ADD or DELETE channels from  
the list of channels stored in the TVs  
memory.  
Main  
Picture  
Press the MENU button on the  
remote to show the on-screen menu.  
Brightness  
Color  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Picture  
Press the CURSOR UP or  
DOWN buttons to scroll through  
the on-screen menu until the word  
INSTALL is highlighted.  
Language  
Sound  
Features  
Install  
Tuner Mode  
Auto Program  
Channel Edit  
More...  
Press the CURSOR RIGHT ᮣ  
button to display the INSTALL menu  
features.  
Press the CURSOR UP or  
DOWN buttons to scroll the Install  
features until the words CHANNEL  
EDIT are highlighted.  
Install  
4
2
Language  
Channel No.  
Skipped  
Tuner Mode  
Auto Program  
Channel Edit  
1
7
9
Press the CURSOR RIGHT ᮣ  
button to display the CHANNEL  
EDIT options.  
3
With the CHANNEL EDIT  
options displayed, and CHANNEL  
NO. highlighted; enter the channel  
number (with the NUMBERED or the  
CH + or – buttons) you wish to add  
(Skipped OFF), or delete (Skipped ON)  
from the TV’s memory.  
5
VO
8
2
Channel Edit  
Channel No.  
Skipped  
4
6
12  
Scroll down (using the CURSOR  
DOWN button) to highlight the  
word SKIPPED.  
Now use the CURSOR RIGHT ᮣ  
button to toggle between ON or OFF.  
If ON is selected the channel is  
skipped when scrolling channels with  
the CH + or – buttons. If OFF is select-  
ed the channel is not skipped when  
scrolling channels with the CH + or –  
buttons.  
Channel Edit  
Channel No.  
Skipped  
On  
Off  
Channel Edit  
Channel No.  
Skipped  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
13  
HOW TO USE THE PICTURE ADJUSTMENT CONTROLS  
o adjust your TV picture controls,  
Tselect a channel and follow the  
steps shown below:  
Main  
Picture  
Brightness  
Color  
Press the MENU button on the  
remote to display the on-screen menu.  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Picture  
Brightness  
50  
Press the CURSOR UP or  
DOWN buttons until the word PIC-  
TURE is highlighted.  
Color  
More...  
Picture  
Sharpness  
Tint  
Press the CURSOR RIGHT ᮣ  
button to display the PICTURE menu  
features.  
ColorTemp.  
Press CURSOR UP or DOWN  
buttons to scroll the Picture features  
and highlight the control you wish to  
adjust (Brightness, Color, Picture,  
Sharpness, Tint, or Color Temp.).  
6
Picture  
4
2
65  
50  
Brightness  
Color  
1
7
Press the CURSOR RIGHT or  
the CURSOR LEFT buttons to  
adjust the selected control or to make  
selections for the Color Temp. control  
(Normal, Warm, or Cool).  
Picture  
Brightness  
Color  
Picture  
5
6
3
5
Picture  
VO
Brightness  
Press the CURSOR UP or  
DOWN buttons to select and adjust  
other Picture Menu controls.  
2
Color  
4
Picture  
50  
Sharpness  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
Picture  
Brightness  
Color  
Picture  
Sharpness  
50  
SMART HELP  
Picture  
BRIGHTNESS Press the or  
buttons until darkest parts of the  
picture are as bright as you prefer.  
Brightness  
Color  
Picture  
COLOR Press the or buttons to add  
or eliminate color.  
Sharpness  
Tint  
0
PICTURE Press the or buttons until  
lightest parts of the picture show good  
detail.  
Picture  
Brightness  
Color  
SHARPNESS Press the or buttons  
to improve detail in the picture.  
Picture  
TINT Press the or buttons to obtain  
natural skin tones.  
Sharpness  
Tint  
Normal  
ColorTemp.  
COLOR TEMP Press the or buttons  
to select NORMAL, COOL, or WARM pic-  
ture preferences. (NORMAL will keep the  
whites, white; COOL will make the whites,  
bluish; and WARM will make the whites,  
reddish.)  
Warm  
or  
Cool  
14  
HOW TO USE THE DNR (NOISE REDUCTION) CONTROL  
or reasons such as poor cable recep-  
Ftion, the picture can sometimes  
appear slightly “speckled” (or has signal  
noise shown in the picture). The DNR  
(Dynamic Noise Reduction) control can  
help eliminate this type of interference  
and improve the quality of the picture.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Picture  
Brightness  
Press the MENU button on the  
remote to display the on-screen menu.  
50  
Color  
More...  
Picture  
Press the CURSOR UP or  
CURSOR DOWN button until the  
word PICTURE is highlighted.  
Sharpness  
Tint  
ColorTemp.  
Press the CURSOR RIGHT ᮣ  
button to display the PICTURE menu  
features.  
Picture  
4
2
Press the CURSOR UP or  
CURSOR DOWN button to scroll  
the Picture menu features until the word  
DNR is highlighted.  
Color  
Picture  
Sharpness  
Tint  
1
6
ColorTemp.  
DNR  
On  
Press the CURSOR RIGHT ᮣ  
button turn the DNR feature ON or  
OFF.  
3
5
VO
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
2
Picture  
4
Color  
Picture  
Sharpness  
Tint  
ColorTemp.  
DNR  
On  
SMART HELP  
“Noise” Reduction is a video  
adjustment feature that affects the  
OR  
picture quality of the TV not the sound.  
Picture  
NOTE: If the Sharpness control setting  
is under 50 (see Picture Adjustments on  
the previous page), the DNR control will  
have little or no effect to the TV’s pic-  
ture when switched to ON.  
Color  
Picture  
Sharpness  
Tint  
ColorTemp.  
DNR  
Off  
15  
HOW TO USE THE CONTRAST + (BLACK STRETCH) CONTROL  
he Contrast + (Black Stretch) con-  
Ttrol helps to “sharpen” the picture  
quality. The black portions of the pic-  
ture become richer in darkness and the  
whites become brighter.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Press the MENU button on the  
remote to display the on-screen menu.  
Picture  
Sharpness  
Tint  
Picture  
Brightness  
50  
Press the CURSOR UP or CUR-  
SOR DOWN button until the word  
PICTURE is highlighted.  
Color  
More...  
Picture  
Sharpness  
Tint  
Press the CURSOR RIGHT ᮣ  
button to display the PICTURE menu  
features.  
ColorTemp.  
Press the CURSOR UP or  
CURSOR DOWN button to scroll  
the Picture menu features until the word  
CONTRAST + is highlighted.  
Picture  
4
2
Picture  
Sharpness  
Tint  
1
6
ColorTemp.  
DNR  
Press the CURSOR RIGHT ᮣ  
button turn the CONTRAST + feature  
ON or OFF.  
On  
Contrast +  
3
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
5
VO
2
Picture  
4
Color  
Picture  
Sharpness  
Tint  
ColorTemp.  
Contrast +  
On  
OR  
Picture  
Color  
Picture  
Sharpness  
Tint  
ColorTemp.  
Contrast +  
Off  
16  
HOW TO SET THE BASS AND TREBLE BOOST CONTROLS  
esides the normal volume level con-  
Btrol, your TV also has Bass and  
Treble Boost sound controls. The TRE-  
BLE Boost effects only the high fre-  
Main  
quency sound coming from the TV  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Main  
Picture  
enhancing the highs; while the BASS  
Boost effects only the low frequency  
sound coming from the TV enhancing  
the lows.  
Treble Boost  
Bass Boost  
AVL  
Picture  
Sharpness  
Tint  
Sound  
Features  
Install  
More...  
Press the MENU button on the  
remote to display the on-screen menu.  
Press the CURSOR UP or CUR-  
SOR DOWN button until the word  
SOUND is highlighted.  
Sound  
Treble Boost  
Bass Boost  
AVL  
On  
4
2
Press the CURSOR RIGHT ᮣ  
button to display the SOUND menu  
features.  
1
6
Press the CURSOR UP or  
CURSOR DOWN button to scroll  
the Sound menu features until the  
words BASS BOOST or TREBLE  
BOOST are highlighted.  
3
5
VO
Picture  
2
Treble Boost  
Picture  
On  
4
Press the CURSOR RIGHT ᮣ  
button to turn the Bass or Treble  
Boost controls ON or OFF.  
Picture  
Treble Boost  
Off  
Picture  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
Sharpness  
Tint  
ColorTemp.  
Contrast +  
OR  
Picture  
Treble Boost  
Bass Boost  
Sharpness  
On  
Picture  
Treble Boost  
Bass Boost  
Sharpness  
Tint  
Off  
ColorTemp.  
Contrast +  
17  
HOW TO USE THE AVL (AUTOMATIC VOLUME LEVELER) CONTROL  
n most cases, the volume levels com-  
Iing from broadcast programming or  
commercials are never the same. With  
the AVL (Audio Volume Leveler) control  
turned ON, you can have the TV level  
out sound that is being heard. This  
makes for a more consistent sound by  
reducing the peaks and valleys that  
occur during program changes or com-  
mercial breaks. To turn the AVL ON,  
follow these steps.  
Main  
Picture  
Brightness  
Color  
Main  
Picture  
Sound  
Features  
Install  
Treble Boost  
Bass Boost  
AVL  
Picture  
Sharpness  
Tint  
Sound  
Features  
Install  
More...  
Press the MENU button on the  
remote to display the on-screen menu.  
Press the CURSOR UP  
or CUR-  
SOR DOWN button until the word  
SOUND is highlighted.  
Sound  
Press the CURSOR RIGHT ᮣ  
button to display the SOUND menu  
features.  
On  
Treble Boost  
Bass Boost  
AVL  
4
2
1
6
Press the CURSOR UP  
or CUR-  
SOR DOWN button to scroll the  
Sound menu features until the word  
AVL is highlighted.  
3
Press the CURSOR RIGHT ᮣ  
button to turn the AVL control ON or  
OFF.  
5
Sound  
VO
Treble Boost  
Bass Boost  
AVL  
2
4
Off  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
OR  
Sound  
Treble Boost  
Bass Boost  
AVL  
On  
18  
Let'  
s
Loo  
k
Insi  
de!  
HOW TO THE TIMER CONTROLS  
he Timer controls allow you to use  
Tyour TV as an alarm clock if set to  
turn itself on and off at a specific time.  
It also can be set to tune to a specific  
channel at a specific time.  
Timer  
Time  
10 :30AM  
Press the CLOCK button on the  
remote to display the Timer on-screen  
menu.  
StartTime  
StopTime  
Channel  
Activate  
Timer  
Time  
StartTime  
StopTime  
Channel  
Activate  
12 :30 PM  
Press the CURSOR UP  
or  
Display  
DOWN button to highlight one of  
the Timer controls you wish to set  
(Time, Start Time, Stop Time, Channel,  
Activate, or Display).  
Display  
Press the CURSOR RIGHT ᮣ  
button to adjust the selected option.  
Timer  
Time  
TIME: Enter the current time with the  
numbered buttons. Use the Cursor Right  
button to move to the AM/PM area and use  
the Cursor Left or Right buttons to toggle  
AM or PM.  
StartTime  
StopTime  
Channel  
Activate  
Display  
2
01 :30 PM  
4
START TIME: Use the numbered buttons  
to enter a start-up time for the TV to turn  
on or to tune a specific channel.  
3
Timer  
STOP TIME: Use the numbered buttons  
to enter a time for the TV to shut itself off.  
VO
Time  
2
StartTime  
StopTime  
Channel  
Activate  
Display  
CHANNEL: Use the Numbered buttons to  
select a specific channel for the TV to tune  
to at the specific Start Time.  
0
10  
Once  
On  
ACTIVATE: Set the Timer to preform it’s  
function ONCE or DAILY.  
1
DISPLAY: Set to ON or OFF. When ON,  
the time will be displayed permenately  
while the TV is on. When OFF is selected,  
the time will be displayed whenever the  
STATUS/EXIT button is pressed.  
Timer  
Time  
StartTime  
StopTime  
Channel  
Activate  
Display  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
Timer  
Time  
StartTime  
StopTime  
Channel  
Activate  
Display  
19  
UNDERSTANDING THE AUTOLOCK CONTROLS  
he AutoLock feature is an inte-  
Tgrated circuit that receives and  
processes data sent by broadcast-  
ers, or other program providers,  
that contain program content advi-  
sories. When programmed by the  
viewer, a TV with AutoLock can  
respond to the content advisories  
and block program content that  
may be found objectionable (such  
as offensive language, violence,  
sexual situations, etc.). This is a  
great feature to censor the type of  
viewing children may watch.  
Movie Rating  
TV Rating  
TV-Y  
G
On  
On  
PG  
PG-13  
R
NC-17  
X
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
Over the next few pages you’ll  
learn how to block channels and  
certain rated programming. Below  
is a brief explanation of some terms  
and ratings you will find in the  
AutoLock feature.  
MOVIE RATINGS  
TV PARENTAL GUIDELINES  
(MOTION PICTURE ASSOCIATION OF AMERICA)  
(TV BROADCASTERS)  
G: General Audience - All ages admitted.  
Most parents would find this program suit-  
able for all ages. This type of programming  
contains little or no violence, no strong lan-  
guage, and little or no sexual dialogue or  
situations.  
TV-Y - (All children -- This program is  
TV  
designed to be appropriate for all chil-  
Y dren.) Designed for a very young audi-  
ence, including children ages 2-6. This type of  
programming is not expected to frighten  
younger children.  
AutoLock offers various  
BLOCKING controls from which  
to choose:  
PG: Parental Guidance Suggested - This  
programming contains material that parents  
may find unsuitable for younger children.) It  
may contain one or more of the following:  
Moderate violence, some sexual situations,  
infrequent coarse language, or some sugges-  
tive dialogue.  
TV-Y7 - (Directed to Older Children -  
TV  
- This program is designed for children  
Access Code: An Access Code  
must be set to prevent children from  
unblocking questionable or cen-  
sored programming set by their par-  
ents.  
Y7 age 7 and above.) It may be more  
appropriate for children who have acquired the  
development skills needed to distinguish  
between make-believe and reality. This pro-  
gramming may include mild fantasy and comic  
violence (FV).  
Channel Block: After an access  
code has been programmed, you  
can block individual channels  
including the A/V inputs.  
PG-13: Parents Strongly Cautioned - This  
programming contains material that parents  
may find unsuitable for children under the  
age of 13. It contains one or more of the fol-  
lowing: violence, sexual situations, coarse  
language, or suggestive dialogue.  
TV-G - (General Audience -- Most par-  
TV  
ents would find this program suitable  
Gfor all ages.) This type of programming  
contains little or no violence, no strong lan-  
guage, and little or no sexual dialogue or situa-  
tions.  
Clear All: Allows you clear all  
channels being blocked from your  
viewing set with the Channel Block  
Control.  
R: Restricted -This is programming is specif-  
ically designed for adults. Anyone under the  
age of 17 should only view this program-  
ming with an accompanying parent or adult  
guardian. It contains one or more of the fol-  
lowing: intense violence, intense sexual situ-  
ations, strong coarse language, or intensely  
suggestive dialogue.  
TV-PG - (Parental Guidance  
Suggested -- This program contains  
material that parents may find unsuit-  
TV  
PG  
Block All: Allows you to block  
ALL channels and A/V inputs at  
one time.  
able for younger children.) This type of pro-  
gramming contains one or more of the follow-  
ing: Moderate violence (V), some sexual situa-  
tions (S), infrequent coarse language (L), or  
some suggestive dialogue (D).  
Movie Ratings: Certain blocking  
options exist which will block pro-  
gramming based on ratings pat-  
terned by the Motion Pictures  
Association of America.  
NC-17: No one under the age of 17 will be  
admitted. - This type of programming should  
be viewed by adults only. It contains graphic  
violence, explicit sex, or crude indecent lan-  
guage.  
TV-14 - (Parents Strongly Cautioned -  
TV  
- This program contains some material  
14 that many parents would find unsuitable  
TV Ratings: Just like the Movie  
Ratings, programs can be blocked  
from viewing using standard TV  
ratings set by TV broadcasters.  
for children under 14 years of age.) This type  
of programming contains one or more of the  
following: intense violence (V), intense sexual  
situations (S), strong coarse language (L), or  
intensely suggestive dialogue (D).  
X: Adults Only - This type of programming  
contains one or more of the following: very  
graphic violence, very graphic and explicit or  
indecent sexual acts, very coarse and intense-  
ly suggestive language.  
To learn more about the Motion  
Picture Association of America  
Ratings and the TV Broadcasters  
Television Ratings, refer to the defi-  
nitions listed on the columns to the  
right.  
TV-MA - (Mature Audience Only --  
This program is specifically designed to  
be viewed by adults and therefore may  
TV  
MA  
be unsuitable for children under 17.) This type  
of programming contains one or more of the  
following: graphic violence (V), explicit sexual  
situations (S), or crude indecent language (L).  
20  
SETTING UP THE AUTOLOCK ACCESS CODE  
ver the next few pages you’ll learn  
Ohow to block channels and get a  
better understanding of the rating terms  
for certain programming.  
Main  
Picture  
Brightness  
Color  
Sound  
Features  
Install  
First, lets start by learning how to set a  
personal access code:  
Picture  
Sharpness  
Tint  
Main  
Picture  
Timer  
Sound  
Features  
Install  
AutoLock  
More...  
Press the MENU button on the  
remote to display the on-screen menu.  
Press the CURSOR UP or  
DOWN button until the word FEA-  
TURES is highlighted.  
Features  
4
2
Timer  
Time  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
1
Press the CURSOR UP  
or  
DOWN  
button until the words  
3
5
AUTOLOCK are highlighted.  
VO
2
Features  
Timer  
4
Press the CURSOR RIGHT ᮣ  
button. The screen will read,  
“ACCESS CODE - - - - .”  
Timer  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
6
7
Using the NUMBERED buttons,  
enter 0, 7, 1, 1. “XXXX” appears on  
the Access Code screen as you press the  
numbered buttons.  
NOTE: The 0,7,1,1 access code shown  
on this page is the default code or a  
way to reset the code when the current  
access code is not known.  
Features  
Timer  
“INCORRECT CODE” will appear on  
the screen, and you will need to enter 0,  
7, 1, 1 again.  
Access Code  
- - - - StopTime  
Channel  
AutoLock  
Activate  
Display  
The screen will ask you to enter a  
“New Code.” Enter a “new” 4 digit  
code using the NUMBERED buttons.  
The screen will then ask you to CON-  
FIRM the code you just entered. Enter  
your new code again. “XXXX” will  
appear when you enter your new code  
and then display the AutoLock menu  
options.  
Features  
Timer  
Features  
Timer  
Features  
Timer  
Access Code  
XXXX  
Access Code  
XXXX StopTime  
Channel  
Access Code  
XX - -StopTime  
Channel  
AutoLock  
AutoLock  
AutoLock  
Incorrect  
Activate  
Display  
Activate  
Activate  
Display  
Display  
Proceed to the next page to learn more...  
SMART HELP  
Features  
Timer  
Features  
Timer  
Features  
Timer  
New Code  
- - - -StopTime  
Channel  
New Code  
XXX -StopTime  
Channel  
Confirm Code  
XXXXStopTime  
Channel  
Parents - it isn’t possible for  
your child to unblock a channel  
without knowing your access code or  
changing it to a new one. If your code  
changes, and you didn’t change it, then  
you know it’s been altered by someone  
else and blocked channels have been  
viewed.  
AutoLock  
AutoLock  
AutoLock  
Activate  
Activate  
Activate  
Display  
Display  
Display  
The AutoLock  
Access Code also  
can be changed  
anytime using the  
Setup Code feature  
AutoLock  
AutoLock  
Block Channel OffStopTime  
Block Channel  
Setup Code  
ClearAll  
Setup Code  
ClearAll  
Channel  
Activate  
Display  
OffStopTime  
Channel  
Activate  
BlockAll  
BlockAll  
Movie Rating  
TV Rating  
Movie Rating  
TV Rating  
Display  
21  
HOW TO BLOCK CHANNELS  
fter your personal access code has  
Abeen set (see previous page), you  
are now ready to select the channels  
you want to block out or censor.  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Press the NUMBERED (or CH +,  
–) buttons to tune the channel you  
wish to block or censor.  
Picture  
Sharpness  
Tint  
Main  
Picture  
Timer  
Sound  
Features  
Install  
AutoLock  
More...  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN button until the word  
FEATURES is highlighted.  
8
Features  
5
3
Timer  
Time  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
2
8
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
Press the CURSOR UP or  
DOWN button until the words  
AutoLock are highlighted.  
4
6
VOL  
9
3
Features  
Timer  
5
10  
Timer  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
Press the CURSOR RIGHT ᮣ  
button.  
1
7
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. AutoLock  
menu options will be displayed.  
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
Features  
Timer  
Access Code  
- - - - StopTime  
Channel  
AutoLock  
Press the CURSOR UP or  
DOWN buttons until the words  
BLOCK CHANNELS are highlighted.  
Activate  
Display  
Press the CURSOR RIGHT ᮣ  
button to turn blocking ON or OFF for  
that channel. When ON is selected the  
channel will be blocked.  
Features  
Timer  
AutoLock  
AutoLock  
Block Channel  
Setup Code  
ClearAll  
OffStopTime  
Channel  
Activate  
Block Channel OnStopTime  
Access Code  
XXXX StopTime  
Channel  
AutoLock  
Setup Code  
ClearAll  
Channel  
Activate  
Display  
10  
Press the CH + or – button to  
select other channels you wish to  
block. Repeat step 9 to block the new  
channel.  
BlockAll  
Display  
BlockAll  
Activate  
Movie Rating  
TV Rating  
Movie Rating  
TV Rating  
Display  
Channel 12  
Enter your Access Code to  
view a tuned channel that is  
blocked with Block Channel.  
Blocked ByAutoLock  
Channel Blocking  
Access Code  
- - - -  
SMART HELP  
If you tune to a blocked chan-  
nel and enter your Access Code  
to view the channel, ALL blocked chan-  
nels will be viewable until the TV has  
been turned off. When the TV is pow-  
ered back ON, the previously blocked  
channels will be blocked again.  
22  
HOW TO CLEAR ALL BLOCKED CHANELS AT THE SAME TIME  
fter blocking specific channels there  
Amay come a time when you want to  
clear all the channels so they can be  
viewed. The following steps explain  
how to CLEAR ALL blocked channels.  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN button until the word  
FEATURES is highlighted.  
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
7
4
2
1
7
Press the CURSOR UP or  
DOWN button until the words  
AutoLock are highlighted.  
9
3
Press the CURSOR RIGHT ᮣ  
button.  
5
VOL  
8
2
4
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. AutoLock  
menu options will be displayed.  
6
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
Press the CURSOR UP or  
DOWN buttons until the words  
CLEAR ALL are highlighted.  
Press the CURSOR RIGHT ᮣ  
button to clear all blocked channels.  
The Clear All option will read,  
“Cleared.”  
When finished, press the STATUS  
/EXIT button to remove the menu  
from the TV’s screen.  
SMART HELP  
If you tune to a blocked chan-  
nel and enter your Access Code  
to view the channel, ALL blocked chan-  
nels will be viewable until the TV is  
powered OFf and then turned back ON.  
When the TV is powered back ON, the  
previously blocked channels will be  
blocked again.  
The Clear All option when activated  
will unblock ALL blocked channels. It  
will not affect programming blocked  
by the Movie or TV Rating options.  
Or, enter your Access  
CLEAR ALL will not work with the  
Movie and TV Ratings. These options  
must be reset individually.  
Code to view a tuned  
channel that is blocked  
with Block Channel.  
23  
HOW TO BLOCK ALL CHANNELS AT THE SAME TIME  
here may come a time when you  
Twant to Block All the televisions  
channels. Maybe you dont want your  
children to watch TV for a given time.  
With the Block All control, ALL avail-  
able channels (including the A/V  
Inputs) can be set to block at the same  
time.  
Main  
Picture  
Brightness  
Color  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Picture  
Timer  
Sound  
Features  
Install  
AutoLock  
More...  
Press the MENU button on the  
remote to show the on-screen menu.  
Press the CURSOR UP or  
DOWN button until the word FEA-  
TURES is highlighted.  
Features  
7
Timer  
Timer  
4
2
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
1
7
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
9
Press the CURSOR UP or  
DOWN button until the words  
AutoLock are highlighted.  
3
5
V
8
Features  
Timer  
2
Timer  
4
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
Press the CURSOR RIGHT ᮣ  
button.  
6
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. AutoLock  
menu options will be displayed.  
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
Features  
Timer  
Access Code  
- - - -  
AutoLock  
Press the CURSOR UP or  
DOWN buttons until the words  
BLOCK ALL are highlighted.  
Press the CURSOR RIGHT ᮣ  
button to turn Block All ON or OFF.  
When ON is selected, ALL available  
channels will be blocked.  
Features  
Timer  
AutoLock  
AutoLock  
Block Channel  
Setup Code  
ClearAll  
Block Channel  
Setup Code  
ClearAll  
Access Code  
XXXX  
AutoLock  
BlockAll  
Off  
BlockAll  
On  
When finished, press the STA-  
TUS/EXIT button to remove the  
menu from the screen.  
Movie Rating  
TV Rating  
Movie Rating  
TV Rating  
Channel 12  
Blocked ByAutoLock  
Channel Blocking  
Access Code  
- - - -  
Enter your Access Code to  
view a tuned channel that is  
blocked with Block Channel.  
SMART HELP  
If you tune to a blocked chan-  
nel and enter your Access Code  
to view the channel, ALL blocked chan-  
nels will be viewable until the TV has  
been turned off. When the TV is pow-  
ered back ON, the previously blocked  
channels will be blocked again.  
24  
BLOCKING PROGRAMMING BASED ON MOVIE RATINGS  
here are two types of program rat-  
Tings within the AutoLock feature.  
One is based on the Movie Industry rat-  
ings while the other is based on the TV  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Industry ratings. Both can be used to  
block or censor programming that has  
been rated in either manner.  
Picture  
Sharpness  
Tint  
Main  
Picture  
Timer  
Sound  
Features  
Install  
AutoLock  
Lets first look at the Movie Rating  
options of AutoLock:  
More...  
Press the MENU button on the  
Each Movie Rating can  
be turned “ON” or “OFF.”  
remote to display the on-screen menu.  
9
7
Features  
Press the CURSOR UP or  
DOWN button until the word FEA-  
TURES is highlighted.  
4
2
Timer  
Time  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
1
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
3
5
10  
VO
Press the CURSOR UP  
DOWN button until AutoLock is  
highlighted.  
or  
8
2
Features  
Timer  
4
Timer  
7
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
9
Press the CURSOR RIGHT ᮣ  
button. The screen will prompt you  
for your Access Code.  
6
Using the NUMBERED buttons  
on the remote, enter your 4 digit  
Access Code. The AutoLock menu  
options will be displayed.  
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
Features  
Timer  
Access Code  
- - - - StopTime  
Channel  
AutoLock  
Press the CURSOR UP  
or  
Activate  
Display  
DOWN  
button to highlight the  
words MOVIE RATINGS.  
Press the CURSOR RIGHT ᮣ  
button to display the MOVIE RAT-  
INGS options (G, PG, PG-13, R,  
NC17, or X).  
Features  
Timer  
AutoLock  
Movie Rating  
G
Off  
Access Code  
XXXX StopTime  
Channel  
Block Channel  
Setup Code  
ClearAll  
G
PG  
AutoLock  
PG  
PG-13  
R
PG-13  
R
Press the CURSOR UP  
or  
Activate  
BlockAll  
DOWN button to highlight any of  
the Movie Ratings options. When high-  
lighted, all these options can be turned  
ON (which will allow blocking) or  
OFF (which will allow viewing).  
Display  
Movie Rating  
TV Rating  
NC-17  
More...  
NC-17  
X
Use the CURSOR RIGHT but-  
10  
Movie Rating  
G
On  
ton on the remote to turn the rating  
Channel 12  
PG  
PG-13  
R
OffStopTime  
Blocked ByAutoLock  
option ON or OFF.  
Channel  
Movie Rating  
Activate  
NC-17  
X
Display  
Access Code  
- - - -  
SMART HELP  
To view a program blocked by  
the Movie Rating options, enter  
your 4 digit access code. This  
will disable all blocked Movie  
Ratings until the TV is powered  
off and on again. Then the block-  
ing options will be restored.  
When a rating is set to block,  
all higher ratings will be auto-  
matically blocked as well. (Example: If  
the the PG-13 rating is set to block, the  
R, NC-17, and X ratings will also be  
blocked.  
25  
BLOCKING PROGRAMMING BASED ON TV RATINGS  
his portion of the AutoLock features  
Tcover program ratings based on the  
TV Industry rating system. This is  
known as TV Ratings within AutoLock.  
AutoLock  
After selecting the Autolock feature and  
entering your personal access code, the  
AutoLock options screen appears;  
Block Channel TV-Y  
Setup Code  
ClearAll  
TV-Y7  
TV-G  
TV Rating  
TV-Y  
BlockAll  
TV-PG  
TV-14  
TV-MA  
Off  
Movie Rating  
TV Rating  
TV-Y7  
TV-G  
Scroll the menu using the CUR-  
SOR UP or DOWN buttons  
until the words TV RATINGS are  
highlighted.  
TV-PG  
TV-14  
TV-MA  
To view a program  
blocked by the TV Rating  
options, enter your 4 digit  
access code. This will  
disable all blocked TV  
Ratings until the TV is  
powered off and on  
Press the CURSOR RIGHT but-  
ton to display the TV Ratings (TV-Y,  
TV-Y7, TV-G, TV-PG, TV-14, or TV-  
MA). When highlighted, the TV-Y and  
TV-G can be turned ON (which will  
allow blocking) or OFF (which will  
allow viewing), of these rated programs.  
TV Rating  
TV-Y  
5
On  
3
TV-Y7  
TV-G  
1
TV-PG  
TV-14  
TV-MA  
again. Then the blocking  
options will be restored.  
2
The ratings of TV-Y7, TV-PG, TV-14,  
TV-MA can be customized to block V  
(violence), FV (fantasy violence), S  
(sexual situations), L (coarse language),  
or D (suggestive dialogue).  
TV Rating  
TV-Y  
4
BlockAll  
FV  
VO
6
TV-Y7  
TV-G  
1
3
5
TV-PG  
TV-14  
TV-MA  
Press the CURSOR UP or  
DOWN button to highlight the  
desired rating.  
Channel 12  
OffStopTime  
Blocked ByAutoLock  
TV Rating  
TV-Y  
Channel  
TV Rating  
Activate  
TV-Y7  
TV-G  
Display  
Press the CURSOR RIGHT ᮣ  
button on the remote to turn the TV-Y  
or TV-G rating ON or OFF. Or, press  
the CURSOR RIGHT button to  
enter the sub-menus for the TV-Y7, TV-  
PG, TV-14 or TV-MA ratings.  
Access Code  
Off  
- - - -  
TV-PG  
TV-14  
TV-MA  
TV Rating  
TV-Y  
TV Rating  
TV-Y  
TV Rating  
If the TV-Y7, TV-PG, TV-14 or TV-  
MA sub-menu is accessed, press the  
CURSOR UP or CURSOR DOWN  
button to select one of the options  
(Block All, V, S, L, D, or FV).  
BlockAll  
BlockAll  
TV-Y  
BlockAll  
TV-Y7  
TV-G  
V
S
L
TV-Y7  
TV-G  
V
S
L
TV-Y7  
TV-G  
V
S
L
TV-PG  
TV-14  
TV-PG  
TV-14  
TV-PG  
TV-14  
TV-MA  
D
D
TV-MA  
TV-MA  
Press the CURSOR RIGHT ᮣ  
button on the remote to turn the option  
ON or OFF.  
TV Ratings and  
Rating Sub-Menus  
When a TV Rating is selected to block,  
ALL higher ratings will be blocked also.  
TV-Y - (All children -- This program is designed to be appropriate for all children.) Designed for a very young audience, including children ages 2-6. This type of program-  
ming is not expected to frighten younger children.  
TV-Y7 - (Directed to Older Children -- This program is designed for children age 7 and above.) It may be more appropriate for children who have acquired the development  
skills needed to distinguish between make-believe and reality. This programming may include mild fantasy and comic violence (FV).  
TV-G - (General Audience -- Most parents would find this program suitable for all ages.) This type of programming contains little or no violence, no strong language and little  
or no sexual dialogue or situations.  
TV-PG - (Parental Guidance Suggested -- This program contains material that parents may find unsuitable for younger children.)This type of programming contains one or  
more of the following: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).  
TV-14 - (Parents Strongly Cautioned -- This program contains some material that many parents would find unsuitable for children under 14 years of age.) This type of pro-  
gramming contains one or more of the following: intensely suggestive dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V).  
TV-MA - (Mature Audience Only -- This program is specifically designed to be viewed by adults and therefore may be unsuitable for children under 17.) This type of pro-  
gramming contains one or more of the following: crude indecent language (L), explicit sexual situations (S), or graphic violence (V).  
26  
USING THE AUTOLOCK BLOCKING OPTIONS  
utoLock offers the viewer other  
Ablocking features as well. With  
these Blocking Options, the censoring  
can be turned ON or OFF.  
Main  
Picture  
Brightness  
Color  
Sound  
Features  
Install  
Picture  
Sharpness  
Tint  
Main  
Picture  
Timer  
Sound  
Features  
Install  
AutoLock  
Press the MENU button on the  
remote to show the on-screen menu.  
More...  
Press the CURSOR UP or  
DOWN button until the word  
FEATURES is highlighted.  
9
4
Features  
7
Press the CURSOR RIGHT ᮣ  
button to display the FEATURES  
menu options.  
Timer  
Time  
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
2
1
Press the CURSOR UP or  
DOWN button until the words  
AutoLock are highlighted.  
10  
3
5
10  
VO
Features  
Timer  
8
Press the CURSOR RIGHT ᮣ  
button.  
2
Timer  
4
9
AutoLock  
StartTime  
StopTime  
Channel  
Activate  
Display  
7
Enter the correct access code  
number. XXXX” shows on the  
Access Code display as you press the  
NUMBERED buttons. AutoLock  
menu options will be displayed.  
6
NOTE: Remember, if you ever forget  
your Access Code, the 0,7,1,1 access  
code is the default code or a way to  
reset the code when the current access  
code is not known.  
Features  
Timer  
Access Code  
- - - -  
AutoLock  
Press the CURSOR UP or  
DOWN buttons until the words  
BLOCKING OPTIONS are highlight-  
ed.  
Press the CURSOR RIGHT ᮣ  
button to display the Blocking  
Options (BLOCKING, UNRATED,  
or NO RATING) menu.  
AutoLock  
Features  
Timer  
AutoLock  
Block Channel OffStopTime  
Setup Code  
ClearAll  
Access Code  
XXXX  
AutoLock  
Setup Code  
ClearAll  
Channel  
Activate  
Display  
BlockAll  
Movie Rating  
TV Rating  
BlockingOptions  
BlockAll  
Press the CURSOR UP or  
DOWN buttons to highlight the  
desired feature.  
Movie Rating  
TV Rating  
10  
When highlighted, each feature can  
be turned ON or OFF using the CUR-  
SOR RIGHT or LEFT buttons  
on the remote.  
Blocking Options  
Blocking  
Blocking Options  
Blocking  
Blocking Options  
Blocking  
On  
On  
Unrated  
Unrated  
Unrated  
No Rating  
No Rating  
No Rating  
On  
BLOCKING OPTIONS:  
BLOCKING: This is what might be called the “master switch” for AutoLock. When in the ON position, ALL blocking/censoring  
will take place. When in the OFF position, ALL blocking is disabled.  
UNRATED: ALL unrated programs based on the Movie Ratings or Parental (TV) Guidelines can be blocked if this feature is set  
to ON and the BLOCKING feature is set to OFF.  
NO RATING: ALL programming with NO content advisory data can be blocked if this feature is set to ON and the BLOCKING  
feature is set to OFF.  
27  
Let'  
s
Loo  
k
Insi  
de!  
HOW TO USE THE CLOSED CAPTION CONTROL  
losed Captioning (CC) allows you  
Cto read the voice content of televi-  
sion programs on the TV screen.  
Designed to help the hearing impaired,  
this feature uses on-screen “text boxes”  
to show dialogue and conversations  
while the TV program is in progress.  
Press the CC button on the remote  
to display the current Closed Caption set-  
ting.  
CC Off  
Press the CC button repeatedly to  
choose from the four Closed Caption  
options (CC Off, CC 1, CC 2, CC  
CC 1  
Mute). Dialogue (and descriptions) for  
the action on the captioned TV program  
will appear on-screen if the tuned pro-  
gram is broadcasting CC information.  
When finished, press the STATUS  
/EXIT button to remove the menu from  
the TV’s screen or let the option time out  
and disappear from the TV screen.  
2
1
3
CC 2  
SMART HELP  
Not all TV programs and  
product commercials are made  
VOL  
with Closed Caption (CC) information  
included. Neither are all Closed Caption  
modes (CC1, or CC2) necessarily being  
used during the transmission of a closed  
caption program. Refer to your area's  
TV program listings for the stations and  
times of Closed Caption shows.  
CC Mute  
NOTE: The CC MUTE option  
can be used to set the TV to  
turn the Closed Caption mode  
“ON” whenever the MUTE but-  
ton on the remote is pressed.  
This activates the CC1 option.  
MUTE will appear smaller in  
the upper center of the screen.  
28  
SETTING UP THE SLEEPTIMER OPTION  
ave you ever fallen asleep in front  
Hof the TV only to have it wake you  
up at two in the morning with a test  
pattern screeching in your ears? Well,  
your TV can save you all that trouble  
by automatically turning itself off.  
Press the SLEEP button on the  
remote control and the SLEEP timer  
display will appear on the screen.  
15 Min  
30 Min  
Press the SLEEP button repeatedly  
to pick the amount of time (15, 30, 45,  
60, 90, 120, 180, or 240 minutes)  
before the TV will turn itself off.  
An on-screen count down will appear  
during the last minute before the TV  
shuts itself off.  
45 Min  
60 Min  
VOL  
SMART HELP  
The on-screen menu will time  
out and disappear from the screen  
when you finish, or you can press the  
STATUS/EXIT button to clear the menu  
from the screen.  
2
1
90 Min  
After setting the Sleeptimer, pressing the  
STATUS/EXIT button will display the  
time remaining before the TV will shut  
itself off.  
120 Min  
During the last minute of a  
SLEEP timer setting, an on-  
screen count down will be dis-  
played. Pressing any button  
during the last minute will  
cancel the SLEEP timer.  
During the last 10 seconds of  
a SLEEP timer setting, an  
on-screen display will read  
GOOD BYE.  
180 Min  
Good Bye  
9 Sec  
45 Sec  
240 Min  
29  
SETTING THE AUTO PICTURE CONTROL  
hether you’re watching a movie  
Wor a sporting event, your TV has  
automatic video control settings  
matched for your current program  
source or content. The Auto Picture fea-  
ture quickly resets your TVs video con-  
trols for a number of different types of  
programs and viewing conditions you  
may have in your home. Each Auto  
Picture setting is preset at the factory to  
automatically adjust the TVs  
Brightness, Color, Picture, Sharpness,  
Tint, Color Temperature, DNR and  
Contrast+ levels.  
Personal  
Movies  
Press the AUTO PICTURE button  
on the remote control. The current Auto  
Picture setting will appear in the middle  
of the screen.  
2
1
Press the AUTO PICTURE button  
repeatedly to select either PERSONAL,  
MOVIES, SPORTS, WEAK SIGNAL,  
or MULTI MEDIA picture settings.  
Sports  
Note: The PERSONAL setting is the  
setting that you setup using the PIC-  
TURE options within the on-screen  
menu. This is the only Auto Picture set-  
ting that can be changed. All other set-  
tings are setup at the factory during the  
time of production.  
VOL  
MOVIES - Preset picture options for  
watching Video Tapes, or DVDs.  
Weak Signal  
SPORTS - Preset picture options for  
watching sporting events.  
WEAK SIGNAL - Preset picture  
options for watching programs where  
the reception is not at its best.  
MULTI MEDIA - Preset picture  
options for use with video gaming.  
Mutli Media  
30  
SETTING THE AUTO SOUND CONTROL  
he Auto Sound feature allows the  
Tlistener to select between four dif-  
ferent factory set sound options.  
Personal (which can be set by the user),  
Theatre (for movie viewing), Music (for  
musical type programming) and Voice  
(when the program is mainly dialogue).  
These setting affect the Sound menus  
Bass, Treble, AVL, and Incredible  
Surround controls  
To select any of the options follow the  
directions below.  
Personal  
Press the AUTO SOUND button on  
the remote control. The current Auto  
Sound setting will appear in the middle of  
the screen.  
Theatre  
Music  
Voice  
Press the AUTO SOUND button  
repeatedly to toggle between the four  
settings.  
2
1
Note: Only the PERSONAL control  
can be changed by the viewer. This  
changes the settings in the main on-  
screen menu's sound controls.  
THEATRE - Preset sound options for  
watching movies.  
VOL  
MUSIC - Preset sound options for musi-  
cal programming where there is little  
dialogue.  
VOICE - Preset sound options for pro-  
gramming where heavy dialogue is pres-  
ent.  
31  
USING THE QUADRA SURF BUTTONS  
“list” or series of previously  
Aviewed channels can be selected  
with the Quadra SURF (colored) but-  
tons on your remote control. With this  
feature you can easily switch between  
different TV programs that currently  
interest you. The Quadra Surf control  
allows you set up four different person-  
al Surf lists using the colored buttons  
(on the remote control), each holding  
up to ten channels in its quick view-  
ing“list.”  
12  
12  
Select List!  
4
3
Press the CHANNEL (+) or (–) but-  
tons (or the NUMBER buttons) to select  
a channel to add to one of the SURF lists.  
12  
Added!  
Press the SMILEY  
the remote control to ADD the channel to  
one of the SURF lists.  
button on  
5
1
2
6
Press the corresponding COL-  
ORED (Red, Green, Yellow or Blue)  
button to add the channel to that button’s  
Surf list. (Up to ten channels per button  
can be stored.)  
VOL  
12  
Remove Item? - Press  
Repeat steps 1 through 3 to add addi-  
tional channels (up to 10) to each of the  
the SURF lists.  
To remove a channel from one of the  
SURF lists;  
Press the COLORED Quadra  
Surf button until the desired channel  
appears. The screen will display the  
channel number with a colored  
“Smiley” face to indicate the Colored  
button it relates to.  
12  
While the “Smiley” face channel  
indicator is displayed, press the  
FROWNIE  
screen will read, “Remove item? -  
Press .”  
face button. The  
A/CH BUTTON  
Your remote also has  
an A/CH (Alternate  
Channel) button.  
Pressing this button  
will toggle between  
the Current and one  
previously selected  
channel.  
5
Press the FROWNIE  
face but-  
ton again to confirm your decision to  
remove the channel from the Surf list.  
22  
1
Repeat steps 4-6 to remove other chan-  
nels from Surf lists.  
32  
USING THE QUADRA SURF BUTTONS  
he Quadra Surf buttons on your  
Tremote control allow you to store up  
to 10 channels per button (40 total).  
This is a great feature if you want to  
store all your favorite Sports channels,  
Movie channels, or News channels in  
one surf list. Family members can have  
there own favorite list of channels. You  
can even program the A/V Input chan-  
nels (AV1, AV2, SVHS, FRONT, etc.)  
for each button making them a  
12  
“source” button for your external  
accessory devices.  
12  
Assuming channels have now been  
added to the four Quadra Surf lists (the  
four colored buttons on the remote, see  
the previous page), lets review how the  
feature works.  
18  
22  
3
Press one of the pre-programmed  
COLORED buttons on the remote  
(Red, Green, Yellow or Blue). The screen  
will display a smiley face with the first  
programmed channel for that surf list.  
2
1
28  
35  
5
While the colored “smiley” face still  
appears on the screen, press the same  
COLORED button on the remote to  
tune the second channel programmed for  
that specific surf list.  
39  
41  
VOL  
Repeatedly pressing the same COL-  
ORED button while the “smiley” face  
appears will tune all the programmed  
channels for that specific surf list. After  
the last channel is tuned, pressing the  
COLORED button again will return you  
to the first channel in the list.  
56  
99  
If the “smiley” face disappears from the  
screen and the same COLORED button is  
pressed, the surf channels will be dis-  
played starting with the FIRST pro-  
grammed channel again.  
5
12  
Remove Item? - Press  
Repeat steps 1-3 for the other three  
COLORED buttons (Surf lists) if desired.  
Any time the “smiley” face appears  
with the channel number, pressing the  
“frownie” face button will allow you  
to remove it from the list (see the previ-  
ous page for more details).  
33  
TROUBLESHOOTING TIPS  
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or  
TV information channel) which shows a constant non-moving pattern on the TV screen,  
can cause picture tube damage. When your TV is continuously used with such a source  
the pattern of the non-moving portion of the game could leave an image permanently on  
the picture tube. When not in use, turn the video source OFF. Regularly alternate the  
use of such video sources with normal TV viewing.  
lease make these simple  
Pchecks before calling for  
service. These tips can save you  
time and money since charges for  
TV installation and adjustment of  
customer controls are not cov-  
ered under your warranty.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again.  
• Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip.  
No Power  
No Picture  
• Check antenna connections. Are they properly secured to the TV's 75plug?  
• Check the TUNER MODE control for CABLE or ANTENNA setting.  
• Check Audio/Video Input jack connections if using a VCR or other external device.  
• Check the VOLUME buttons.  
• Check the MUTE button on the remote control.  
No Sound  
• Check Audio/Video Input jack connections if using a VCR or other external device.  
• Turn the TV OFF for several seconds, then power the set back ON.  
• Unplug the TV for FIVE minutes. Plug the TV back into the AC outlet and power the  
TV ON. This should correct the problem.  
Unusual Screen  
Coloring  
• Check the Picture menu options for proper control settings.  
• Pressthe Auto Picture button on the remote to change the color options. If the color  
resets itself, readjust the Picture menu option control.  
• Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries  
if necessary.  
• Clean the remote and the remote sensor window on the TV.  
• Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into  
outlet and push POWER button again. Be sure fuse is not blown on AC Power strip.  
• Check to be sure TV outlet is not on a wall switch.  
Remote Does Not  
Work  
• Repeat channel selection.  
• Add desired channel numbers (CHANNEL control) into TV memory.  
• Check to be sure the TUNER MODE control is set to the CABLE option.  
TV Displays Wrong  
Channel or No  
Channels Above 13  
Cleaning and Care  
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.  
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using  
anything abrasive). Wipe the front screen with a clean cloth dampened with water. Use even, easy, vertical strokes when  
cleaning.  
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean  
dry cloth to dry the wiped surfaces.  
• Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marring  
of the cabinet finish.  
34  
GLOSSARY TO TELEVISION TERMS  
Auto Picture Booster • A control that will automatically ampli- Menu • An on-screen listing of feature controls shown on the  
fy “weak video signals” to a point where they are acceptable for Television screen that are made available for user adjustments.  
viewing.  
Remote Sensor Window • A window or opening found on the  
Auto Programming • The procedure of adding or deleting  
channel numbers into the Television’s memory circuits. In this  
way the Television “remembers’’ only the locally available or  
desired channel numbers and skips over any unwanted channel  
numbers.  
Television control panel through which infrared remote control  
command signals are received.  
Quadra Surf • The feature that allows the programming of four  
separate Surf lists holding up to 10 channels each.  
Status/Exit • Allows the user to quickly confirm what channel  
number is currently being viewed. Status can also be used to  
clear the Television of on screen displays or information (rather  
than waiting for the displays to “time out” or automatically dis-  
appear from the screen).  
Coaxial Cable • A single solid antenna wire normally matched  
with a metal plug (F-type) end connector that screws (or pushes)  
directly onto a 75 Ohm input found on the Television or VCR.  
Closed Caption • Broadcast standard which allows you to read  
the voice content of television programs on the TV screen.  
Designed to help the hearing impaired this feature uses on-  
screen "text boxes" to show dialogue and conversations while  
the TV program is in progress.  
Surf • The action of scanning specific channel in a limited  
channel list.  
Twin Lead Wire • The more commonly used name for the two  
strand 300 Ohm antenna wire used with many indoor and out-  
door antenna systems. In many cases this type of antenna wire  
requires an additional adapter (or balun) in order to connect to  
the 75 Ohm Input terminals designed into the more recent  
Televisions and VCRs.  
Front Audio/Video Inputs • Located on the front of the TV  
these connectors (phono type plug) are used for the input of  
audio and video signals. Designed for easy use with VCRs or  
cameras.  
On Screen Displays (OSD) • Refers to the wording or mes-  
sages generated by the television (or VCR) to help the user with  
specific feature controls (color adjustment, programming, etc.).  
Tuner Mode • Designed for first time set up and use where the  
TV is set for antenna or cable TV signal connections.  
35  
INDEX  
Alternate Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Dynamic Noise Reduction (DNR) Control . . . . . . . . . . . . . . .15  
Antenna TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Auto Lock Features  
Front A/V Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Access Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Block All Channels Control . . . . . . . . . . . . . . . . . . . . . . . . .24 Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Block Channels Control . . . . . . . . . . . . . . . . . . . . . . . . . . .22 Language Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Blocking Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 Picture Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Clear All Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Explanation of Auto Lock . . . . . . . . . . . . . . . . . . . . . . . . . .20 Remote Control Operation (Basic) . . . . . . . . . . . . . . . . . . . . .8  
Movie Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
TV Rating Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 Sharpness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Auto Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Sleeptimer Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Auto Program Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Surf/Quadra Surf Controls . . . . . . . . . . . . . . . . . . . . . . . .32-33  
Auto Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Timer Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Bass Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Tint Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Brightness Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 Treble Boost Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Cable TV Connection (Basic Connection) . . . . . . . . . . . . . . . .5 Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Channel Edit Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 Tuner Mode Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Closed Caption Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 TV Operation (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Color Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 VCR Connection (Basic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Color Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . .14 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Contrast + Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 Welcome/Registration Information . . . . . . . . . . . . . . . . . . . . .2  
36  
RENEWED  
90 DAY  
LIMITED WARRANTY  

HP Hewlett Packard VLI 8 PC User Manual
IBM 8313 User Manual
Intel PM915P 478 User Manual
KitchenAid KEBS277B User Manual
KitchenAid KECC567RWW00 User Manual
LG Electronics LG Life Good CRT Television 32FZ4D UA User Manual
NEC Electronics America Computer Monitor PX 42XM5G User Manual
NEC LCD2010 User Manual
Philips 107T71 User Manual
Philips SmartCard PPC932C User Manual