Color Monitor
Operating Instructions
Model No.
WV-CK1420A
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
CONTENTS
PREFACE ............................................................................................................................................................................................ 1
FEATURES .......................................................................................................................................................................................... 1
PRECAUTIONS ................................................................................................................................................................................... 1
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ........................................................................................................... 2
ADVANCED CONTROL OPERATION ................................................................................................................................................. 3
CABLE INFORMATIONS ..................................................................................................................................................................... 4
CONNECTION ..................................................................................................................................................................................... 4
SPECIFICATIONS ............................................................................................................................................................................... 4
PREFACE
PRECAUTIONS
The Panasonic’s Color Monitor WV-CK1420A produces
• Do not block the ventilation slots.
sharp color pictures and audio output.
• Do place the video monitor at least 5cm (2 inches) apart
from the wall.
• Do not expose the monitor to water or moisture.
• Do not operate the monitor if it becomes wet.
• Do take immediate action if ever the monitor does
become wet. Turn power off and refer servicing to quali-
fied service personnel. Moisture can damage the monitor
and also create the danger of electric shock.
• Do not drop metallic parts through slots. This action
could permanently damage the monitor. Do turn power
off immediately and refer servicing to qualified service
personnel.
FEATURES
• Approx. 335.4mm (13 inches) diagonal actual visual
size.
• Looping through BNC connectors for video input and out-
put.
• Looping through RCA connectors for audio input and out-
put.
• S-VIDEO input connector.
• Do not attempt to disassemble the monitor. To prevent
electric shock, do not remove screws or cover. There are
no user serviceable parts inside. Refer servicing to qual-
ified service personnel.
• Maximum 0.7W for speaker output.
• Do not use the monitor beyond its temperature, humidity
or power source ratings.
a) Ambient temperature must not range beyond –10°C
- +50°C (14°F–122°F).
b) Avoid using the monitor when humidity is above
90%.
c) The input power must be 120V AC
• Do not stack two or more sets.
If more than two monitors are used, place them less than
15 cm apart. Otherwise, the monitors may produce noise
on the display screen.
- 1 -
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
S-VIDEO
IN
IN
Color Monitor WV-CK1420A
–AUDIO+ MENU –LEVEL+
POWER
ON
OUT IN
AUDIO
OUT
VIDEO
OFF
1. Power Switch (POWER, ON/OFF)
6. Audio Output Connector (AUDIO OUT)
The audio input signal connected to the audio input con-
nector u is looped through to this connector.
This is a push-push type switch which turns the power of
this monitor on and off.
Press once and the switch remains down (;) for turning
on the power of monitor.
7. Audio Input Connector (AUDIO IN)
Press again, the switch comes up (l ) for turning off the
power of the monitor.
For input of audio signal from an outboard device.
8. Video Output Connector (VIDEO OUT)
The video input signal connected to the video input con-
nector o is looped through to this connector and termi-
nated automatically.
2. Audio Control Buttons (-AUDIO+)
Press these buttons to increase or decrease the sound
volume level.
3. Menu Button (MENU)
9. Video Input Connector (VIDEO IN)
For input of the NTSC composite video signal from an
outboard device.
Press to display the setup display or move the cursor
down one line in the setup display.
4. Level Control Button (-LEVEL+)
Press these buttons to adjust level of the selected item in
the setup display, or select a parameter in the setup dis-
play.
10. S-Video Input Connector (S-VIDEO IN)
For input of the NTSC S-Video signal from an outboard
device.
5. Power Indicator
Is on when the Monitor’s power is turned on.
- 2 -
ADVANCED CONTROL OPERATION
• Displaying the Setup Display
1. Turn on the Power Switch of the Monitor.
2. Press the MENU button, the setup display shown below appears on the monitor screen.
It will disappear automatically when no operation takes place for about 3 seconds.
• Adjustment
3. Move the cursor to LANGUAGE by pressing the MENU button.
4. Select the desired LANGUAGE parameter by pressing the LEVEL (–) or (+) buttons, Pressing the buttons will toggle the setup
display in selected language as shown below.
ENGLISH
FRANÇAIS
ESPAÑOL
LEVEL+
LEVEL–
5. Move the cursor to BRIGHT, CONTRAST, PICTURE, COLOR or TINT by pressing the MENU button, then adjust the level of the
selected item by pressing the LEVEL (–) or (+) buttons.
While adjusting the selected item level, the display changes to the indicator as shown below.
Item
Effect
Indicator
32
BRIGHT
BRIGHT
Darker Brighter
32
32
32
32
CONTRAST
PICTURE
COLOR
CONTRAST
PICTURE
COLOR
Less More
Sharp
Soft
Less More
TINT
TINT
Reddish
Greenish
6. To reset the monitor to the default settings, move the cursor to MONITOR RESET by pressing the MENU button. Then press the
LEVEL (+) button to return to the factory default settings.
7. To exit the setup display, press the MENU button repeatedly until the cursor is passed over MONITOR RESET or wait for about
3 seconds until it disappears.
- 3 -
CABLE INFORMATIONS
3. Wiring Precautions:
Power Cable
• Do not bend coaxial cable into a curve whose radius
is smaller than 10 times of its diameter:
• Never crush or pinch the cable.
Al these will change the impedance of the cable and
cause poor picture quality.
1. Keep the Power Switch q in the OFF position during
installation.
2. Connect the Power Cord to a grounded electrical outlet.
Video Cable
Recommended maximum cable length
1. Use the RG-59/U (3C-2V), RG-6/U (5C-2V), RG-11/U
(7C-2V) or RG-15/U (10C-2V) coaxial cable.
2. Up to 10 monitors can be hooked up in this configuration
before signal loss occurs. Total cable length should not
exceed 150m (500 feet).
Cable
RG-59/U
(3C-2V)
RG-6/U
(5C-2V)
RG-11/U
(7C-2V)
RG-15/U
(10C-2V)
Recommended
maximum
250m
500m
600m
800m
cable length
(825ft)
(1650ft)
(1980ft)
(2650ft)
CONNECTION
S-VIDEO
IN
IN
S-VIDEO
IN
IN
S-VIDEO
IN
IN
OUT IN
AUDIO
OUT IN
AUDIO
OUT IN
AUDIO
OUT
VIDEO
OUT
VIDEO
OUT
VIDEO
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
Camera
VIDEO OUT
BNC Connector
VIDEO IN
SPECIFICATIONS
Power Source:
Power Consumption:
Screen Size:
120V AC, 60Hz
Approx. 60W
371.8mm diagonal tube screen size, 90° deflection
335.4mm diagonal actual visual size
370TV lines at center
1.0 V[p-p] composite/75Ω, BNC with Auto Termination
Y: 1.0V[P-P]/75Ω
Horizontal Resolution:
Video Input:
S-Video Input:
C: 0.286V[P-P]/75Ω
–8 dB/Hi-z, RCA standard jack
Audio Input:
Speaker Output:
Sweep Linearity:
0.7W
Horizontal: Less than 5%
Vertical: Less than 5%
Sweep Geometry:
Less than 2%
Ambient Operating Humidity:
Ambient Operating Temperature:
Dimensions:
Less than 90%
–10°C – +50°C (14°F-122°F)
366(W) x 346(H) x 365(D)mm (14-7/16”(W) x 13-10/16”(H) x 14-6/16”(D))
Weight:
9.6kg (21.2 lbs.)
Weights and dimensions shown are approximate.
Specifications are subject to change without notice.
- 4 -
Panasonic Security and Digital Imaging Company
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga,
Ontario, L4W 2T3 Canada (905)624-5010
A Division of Matsushita Electric Corporation of America
Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094
Regional Offices:
Northeast:
Southern:
Midwest:
Western:
One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303
1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838
1707 North Randall Road, Elgin, IL 60123 (847) 468-5211
6550 Katella Ave., Cypress, CA 90630 (714) 373-7840
Panasonic Sales Company
Division of Matsushita Electric of Puerto Rico Inc.
Ave. 65 de Infanteria. Km. 9.5
San Gabriel Industrial Park, Carolina,
Puerto Rico 00985 (809)750-4300
NM0899-1109
TQB4C1A226
Printed in TAIWAN
© Matsushita Communication Industrial Co., Ltd.
1999
|