Panasonic AG HMC150 User Manual

Panasonic Broadcast  
AG-HMC150  
Menu Information  
Using the setup menus  
Use the setup menus to change the settings to  
suit the scenes you are shooting or what you are  
recording.  
Tilt the Operation lever in the  
to move the yellow cursor to the function  
you wish to set.  
directions  
2
3
MENU  
EXEC  
Push the Operation lever (or tilt in the  
direction) to display the setting items.  
MENU button  
PUSH-ENTER  
Operation  
lever  
Example:  
AUDIO MON/ADV  
Tilt the Operation lever in the  
to move the yellow cursor to the item you  
wish to set.  
directions  
4
5
Using the menus  
Example:  
• The menu items indicated in the gray  
characters cannot be changed its settings.  
When the unit is in other than playback or  
recording mode, press the MENU button.  
The following is displayed on the viewfinder and  
LCD monitor.  
1
CAM mode (Example)  
Push the Operation lever (or tilt in the  
direction) to set the item.  
To change values or other parameters, tilt the  
Operation lever in the  
directions.  
Example:  
PB mode (Example)  
• Tilt the Operation lever in the direction to  
return to the previous menu.  
Repeat steps 4 - 5 to change any other  
items.  
6
Press the MENU button to complete settings  
and return to the normal screen.  
82  
Repeat steps 2 - 5 to change any other  
settings.  
7
Press the MENU button to complete settings  
and return to the normal screen.  
Initializing the menu settings  
The menu settings contain both the user file  
settings and the scene file settings. You can  
initialize them separately.  
To initialize the user file (i.e. all the settings  
other than the scene file settings)  
Select INITIALIZE in LOAD/SAVE/INIT of the  
USER FILE screen. The current menu settings of  
user file will return to the factory settings.  
To initialize the scene file  
From the 6 scene files, select the one you want to  
initialize with the scene dial. Then in the SCENE  
FILE screen, LOAD/SAVE/INIT, select INITIALIZE.  
The settings for only the selected scene file are  
returned to the factory settings.  
• This does not effect the other scene files.  
If you wish to initialize the user file and scene  
files at the same time, the user file and all six  
scene files can be restored to their factory  
default settings by selecting YES for the MENU  
INIT item on the OTHER FUNCTIONS screen.  
83  
Setup menu structure  
Camera mode menu  
CAM MENU  
SCENE FILE  
(Page 86)  
CARD READ/WRITE  
LOAD/SAVE/INIT  
SYNCRO SCAN  
DETAIL LEVEL  
V DETAIL LEVEL  
DETAIL CORING  
CHROMA LEVEL  
CHROMA PHASE  
COLOR TEMP Ach  
COLOR TEMP Bch  
MASTER PED  
A.IRIS LEVEL  
DRS  
SW MODE  
(Page 88)  
MID GAIN  
HIGH GAIN  
ATW  
HANDLE ZOOM  
IRIS DIAL  
USER1  
USER2  
USER3  
FOCUS ASSIST  
WFM  
GAMMA  
LCD  
KNEE  
MATRIX  
SKIN TONE DTL  
NAME EDIT  
AUTO SW  
(Page 90)  
A.IRIS  
AGC  
ATW  
AF  
RECORDING SETUP  
(Page 91)  
REC FORMAT  
PREREC MODE  
TIME STAMP  
MIC ALC  
TC/UB SETUP  
(Page 92)  
TC MODE  
TCG  
MIC GAIN1  
TC PRESET  
UB PRESET  
EXT TC LINK  
MIC GAIN2  
AV OUT SETUP  
(Page 93)  
HDMI OUT SEL  
CMPNT OUT SEL  
DOWNCON MODE  
VIDEO SETUP  
AUDIO OUT  
DISPLAY SETUP  
(Page 94)  
ZEBRA DETECT1  
ZEBRA DETECT2  
MARKER  
HP MODE  
CARD FUNCTIONS  
(Page 96)  
CARD FORMAT  
CARD STATUS  
SAFETY ZONE  
REC COUNTER  
VIDEO OUT OSD  
DATE/TIME  
LEVEL METER  
ZOOM & FOCUS  
CARD & BATTERY  
OTHER DISPLAY  
LCD BACKLIGHT  
LCD SET  
USER FILE  
(Page 96)  
CARD READ/WRITE  
LOAD/SAVE/INIT  
META DATA  
(Page 96)  
CARD READ  
RECORD  
USER CLIP NAME  
CLIP COUNT RESET  
META DATA PROP  
META INITIAL SET  
EVF SET  
SELF SHOOT  
EVF COLOR  
OTHER FUNCTIONS  
(Page 98)  
IR REMOTE  
REC LAMP  
BEEP SOUND  
CLOCK SET  
TIME ZONE  
POWER SAVE  
SYSTEM INFO  
MENU INIT  
OPERATION TIME  
84  
Playback mode menu  
PB MENU  
PLAY SETUP  
(Page 97)  
PB FORMAT  
REPEAT PLAY  
RESUME PLAY  
SKIP MODE  
THUMBNAIL SETUP  
(Page 97)  
THUMBNAIL MODE  
INDICATOR  
DATA DISPLAY  
DATE FORMAT  
OPERATION  
(Page 98)  
DELETE  
INDEX  
CLIP PROTECT  
SW MODE  
(Page 88)  
USER1  
USER2  
USER3  
LCD  
AV OUT SETUP  
(Page 93)  
HDMI OUT SEL  
CMPNT OUT SEL  
DOWNCON MODE  
VIDEO SETUP  
AUDIO OUT  
DISPLAY SETUP  
(Page 94)  
VIDEO OUT OSD  
DATE/TIME  
LEVEL METER  
CARD & BATTERY  
OTHER DISPLAY  
LCD BACKLIGHT  
LCD SET  
EVF SET  
EVF COLOR  
CARD FUNCTIONS  
(Page 96)  
CARD FORMAT  
CARD STATUS  
CLIP PROPERTY  
USER FILE  
(Page 96)  
CARD READ/WRITE  
LOAD/SAVE/INIT  
OTHER FUNCTIONS  
(Page 98)  
IR REMOTE  
CLOCK SET  
TIME ZONE  
SYSTEM INFO  
OPERATION TIME  
85  
Setup menu list  
SCENE FILE screen  
Display  
mode  
Item  
Description of settings  
CARD READ/  
WRITE  
(Camera) Reads and writes scene files on the SD Memory Card.  
READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card  
after setting values are selected.  
WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the  
SD Memory Card.  
NO:  
Returns to the last screen.  
LOAD/SAVE/  
INIT  
(Camera) LOAD: Loads the scene file settings which is saved by this camera.  
SAVE: Saves the changed scene file settings.  
INITIALIZE: The settings of the scene file selected with the SCENE FILE dial  
are returned to the factory settings.  
NO:  
Returns to the last screen.  
SYNCRO  
SCAN  
(Camera) Adjusts the synchro scan shutter speed used for shooting images on a TV  
screen, etc.  
Holding the Operation lever toward the or will cause the values to change at  
a faster rate.  
60P/60i:  
1/60.0…1/249.8 (Factory default setting is 1/48.0)  
30P:  
1/30.0…1/48.0…1/249.8  
24P:  
1/24.0…1/48.0…1/249.8  
DETAIL LEVEL (Camera) Adjusts the level of the image outline correction (in the horizontal and vertical  
directions).  
- 7…0…+ 7  
V DETAIL  
LEVEL  
(Camera) Adjusts the level of outline correction in the vertical direction.  
- 7…0…+ 7  
DETAIL  
CORING  
(Camera) Adjusts the level of noise reduction of the detail signal.  
- 7…0…+ 7  
Set to – for a clearer image. Noise increases slightly.  
Set to + to reduce noise.  
CHROMA  
LEVEL  
(Camera) Adjusts the chroma level.  
- 7…0…+ 7  
CHROMA  
PHASE  
(Camera) Makes fine adjustments to the chroma phase.  
- 7…0…+ 7  
COLOR TEMP (Camera) Makes fine adjustments to the color temperature (after white balance Ach  
Ach  
adjustment).  
- 7…0…+ 7  
COLOR TEMP (Camera) Makes fine adjustments to the color temperature (after white balance Bch  
Bch  
adjustment).  
- 7…0…+ 7  
MASTER PED  
A.IRIS LEVEL  
(Camera) Adjusts the master pedestal (black level of the image) as the basis for images.  
- 100…0…+ 100  
(Camera) Sets the desired AUTO IRIS level.  
- 10…0…+ 10  
indicates the factory setting.  
86  
SCENE FILE screen (continued)  
Display  
mode  
Item  
Description of settings  
DRS  
(Camera) Selects the DRS (dynamic range stretcher) function.  
It enables the dynamic range to be expanded by compressing the level of the  
video signals in the high-brightness areas where overexposure results during  
normal shooting.  
OFF, 1, 2, 3  
• The higher the number of the setting, the higher the compression level of the  
high-brightness areas.  
• The higher the number of the setting, the greater the interference in darker  
areas.  
• Not available (grayed out) under settings other than 60i/60P.  
GAMMA  
(Camera) Selects the gamma curves.  
HD NORM: This gamma setting is suitable for HD shooting.  
LOW:  
Makes a mellow image using the gamma curve which has a gentle  
incline in low-brightness curve. The contrast sharpens.  
SD NORM: This is the normal video setting, carried over from the DVX100  
series.  
HIGH:  
Expands the tone of dark parts and makes a brighter image using the  
gamma curve which has a sharp incline in low-brightness curve. The  
contrast softens.  
B.PRESS: Makes the contrast shaper than LOW.  
CINE-LIKE D: Uses a gamma designed to create cinema-like images.  
CINE-LIKE V: Uses a gamma designed to create cinema-like images with  
emphasized contrast.  
• When you select CINE-LIKE gamma, we recommend setting the lens aperture  
lower than normal image level (approximately 1/2) for optimal results.  
KNEE  
(Camera) To avoid overexposure, select the compression level (knee point) of the high  
intensity video signals received through CCD.  
AUTO: Sets the level automatically according to the received signals.  
LOW: Low setting (Compression starts at approx. 80%.)  
MID:  
Medium setting (Compression starts at approx. 90%.)  
HIGH: High Setting (Compression starts at approx. 100%.)  
• Not available when a DRS value is set, or when GAMMA is set to CINE-LIKE.  
MATRIX  
(Camera) Selects the MATRIX table suitable for the desired color expression during  
shooting.  
NORM1: Suitable for shooting in the open air or under a halogen lamp.  
NORM2: Suitable for brighter colors than the NORM1 mode.  
FLUO: Suitable for shooting under fluorescent light indoors.  
CINE-LIKE: Suitable for cinema-like image.  
SKIN TONE  
DTL  
(Camera) Switches skin tone details on or off. Select ON to reduce the skin tone details and  
soften the skin tone.  
ON OFF  
NAME EDIT  
(Camera) Edits the name of the scene file you have selected with the SCENE FILE dial.  
YES NO  
indicates the factory setting.  
87  
Setup menu list (continued)  
SW MODE screen  
Display  
mode  
Item  
Description of settings  
MID GAIN  
HIGH GAIN  
ATW  
(Camera) Sets the gain value assigned to the M position of the GAIN switch.  
0dB, 3dB, 6dB, 9dB, 12dB  
(Camera) Sets the gain value assigned to the H position of the GAIN switch.  
0dB, 3dB, 6dB, 9dB, 12dB  
(Camera) Sets the operation of the ATW (Auto Tracking White) function assigned to the  
WHITE BAL switch. When the ATW function is allocated to the AUTO/MANUAL  
switch or USER button, the operation remains effective.  
Ach:  
Bch:  
Activates the ATW function when the WHITE BAL switch is set to A.  
Activates the ATW function when the WHITE BAL switch is set to B.  
PRST: Activates the ATW function when the WHITE BAL switch is set to PRST.  
OFF: Deactivates the ATW function.  
HANDLE  
ZOOM  
(Camera) Sets the zoom speed assigned to each setting position of the HANDLE ZOOM  
switch.  
L/OFF/H: Sets LOW (low speed)/OFF/HIGH (high speed) to the 1/2/3 position.  
(Zoom is disabled when set to OFF.)  
L/M/H: Sets LOW (low speed)/MID (medium speed)/HIGH (high speed) to the  
1/2/3 position.  
L/OFF/M: Sets LOW (low speed)/OFF/MID (medium speed) to the 1/2/3 position.  
(Zoom is disabled when set to OFF.)  
IRIS DIAL  
USER1  
(Camera) Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL  
IRIS mode)  
DOWN OPEN:The iris opens when the IRIS dial is turned downward.  
UP OPEN: The iris opens when the IRIS dial is turned upward.  
(Camera) Selects the function assigned to the USER1 button.  
(PB)  
SPOTLIGHT: Switches auto iris control for the spotlight on or off.  
BACKLIGHT: Auto iris control for the backlight compensation. (Page 43)  
BLACKFADE: Blackfade (Page 43)  
WHITEFADE: Whitefade (Page 43)  
ATW:  
Switches the ATW function on or off.  
ATW LOCK: Fixes the white balance value when the button is pressed during  
ATW. Press again to perform ATW.  
GAIN:18dB:  
Press the button to set the gain value to 18 dB. This setting takes effect with the  
60i and 60P recording formats only. It is not valid when the slow shutter mode  
(1/15) is established.  
• When the gain value is switched to 18 dB or switched from 18 dB to another  
value, the image can be disordered for a moment.  
• If the unit is being used in the MANUAL mode or AUTO mode, set the AGC item  
on the AUTO SW screen of the setting menu to OFF to use this function.  
D.ZOOM:  
Changes the ratio of the DIGITAL ZOOM function.  
Each press of the button changes the ratio in the following order:  
OFF (x1) x2 x5 x10 OFF (x1). (Page 34)  
Index recording (Page 45)  
INDEX:  
SHOT MARK: Shot mark recording (Page 45)  
LAST CLIP: Deletes the last recorded clip. (Page 45)  
• After recording, clips cannot be deleted by switching to PB or PC mode, by  
changing the recording format, or by turning the camera off.  
USER2  
(Camera) Assigns a function to the USER2 button.  
(PB)  
The setting contents are the same as USER1.  
BACKLIGHT  
indicates the factory setting.  
88  
SW MODE screen (continued)  
Display  
mode  
Item  
Description of settings  
USER3  
(Camera) Assigns a function to the USER3 button.  
(PB) The setting contents are the same as USER1.  
INDEX  
FOCUS  
ASSIST  
(Camera) Assigns a function to the FOCUS ASSIST button.  
EXPANDED: The central part of the screen will be enlarged by a factor of about  
4 in the vertical direction and by a factor of about 6 in the horizontal  
direction.  
“EXPANDED” is displayed on the screen during the expanded  
display.  
GRAPH:Displays a frequency distribution graph at the top right in the viewfinder  
and LCD monitor.  
BOTH: Magnifies the center portion of the image and displays a frequency  
distribution graph.  
(The frequency distribution graph is displayed on either the viewfinder or  
the LCD monitor.)  
WFM  
LCD  
(Camera) Switches the waveform display that appears when the WFM button is pressed.  
WAVE:  
Displays as a waveform. Each time the button is pressed the  
setting changes in this order: OFF WAVE (waveform) OFF.  
Displays as a vector. Each time the button is pressed the setting  
changes in this order: OFF VECTOR OFF.  
VECTOR:  
WAVE/VECTOR:Each time the button is pressed the setting changes in this order:  
OFF WAVE (waveform) VECTOR OFF.  
(Camera) Assigns a function to the LCD button.  
(PB) LCD REV: Flips the LCD image vertically and horizontally.  
LCD BL: Switches the brightness of the LCD backlight.  
• The backlight brightness setting registered in LCD BL will remain stored  
even if the function allocated to the LCD button is changed.  
indicates the factory setting.  
89  
Setup menu list (continued)  
AUTO SW screen  
Display  
mode  
Item  
Description of settings  
A.IRIS  
(Camera) ON:  
Performs the auto iris control in auto mode. The IRIS button is  
deactivated.  
OFF:  
Deactivates the auto iris control in auto mode. This performs the iris  
control selected with the IRIS button.  
AGC  
(Camera) Sets the Auto Gain Control when the ON is selected in A.IRIS.  
6dB: Performs the Auto Gain Control (max. 6 dB) in auto mode.  
12dB: Performs the Auto Gain Control (max. 12 dB) in auto mode.  
OFF:  
Does not perform the Auto Gain Control in auto mode. Initiates the  
control of the gain selected by the GAIN switch.  
ATW  
(Camera) ON:  
Performs the ATW (Auto Tracing White Balance) function in auto mode.  
You cannot select ON/OFF of the ATW function with the WHITE BAL  
switch or the USER button when this is selected. However, if ATW  
LOCK is assigned to the USER button, you can set the white balance  
value with the USER button.  
OFF:  
Does not perform the ATW function in auto mode. This performs the  
white balance function selected with the WHITE BAL switch.  
AF  
(Camera) ON:  
OFF:  
Performs auto focusing in auto mode. You cannot use the FOCUS  
switch and PUSH AUTO button when this is selected.  
Does not perform auto focusing in auto mode. This performs the  
focusing selected with the FOCUS switch or PUSH AUTO button.  
indicates the factory setting.  
90  
RECORDING SETUP screen  
Display  
mode  
Item  
Description of settings  
REC FORMAT  
(Camera) Selects the recording format.  
PH 1080/60i  
PH 1080/30P  
PH 1080/24P  
PH 720/60P  
PH 720/30P  
PH 720/24P  
HA 1080/60i  
HG 1080/60i  
HE 1080/60i  
• PH 1080/24P and PH 720/24P represent native recording.  
PREREC  
MODE  
(Camera) Sets PRE RECORDING to ON or OFF. (Page 42)  
ON OFF  
TIME STAMP  
(Camera) Specifies whether date and time information is superimposed over recorded  
images.  
ON:  
Superimposes date and time information on the image.  
OFF:  
Does not superimpose date and time information on the image.  
MIC ALC  
(Camera) Sets mic level auto control to ON or OFF. (Page 49)  
ON OFF  
Set to ON to reduce distortion at high input levels.  
To adjust the recording level of audio signals (not related to this setting), use the  
AUDIO control knobs.  
MIC GAIN1  
MIC GAIN2  
(Camera) Sets the input level of the external microphone connected to the INPUT 1  
terminal. (Page 48)  
-50dB -60dB  
(Camera) Sets the input level of the external microphone connected to the INPUT 2  
terminal. (Page 48)  
-50dB -60dB  
indicates the factory setting.  
91  
Setup menu list (continued)  
TC/UB SETUP screen  
Display  
mode  
Item  
Description of settings  
TC MODE  
(Camera) Selects the correction mode of the internal time code generator when the time  
code of the internal time code generator is recorded.  
DF:  
Uses the drop frame mode.  
NDF:  
Uses the non-drop frame mode.  
• TC MODE is automatically set to NDF when you set recording frame rate of  
recording format to 24P.  
TCG  
(Camera) Sets the mode in which you advance the internal time code generator.  
FREE RUN: The time code is advanced regardless of the operation mode.  
A slight time error may occur when switching to PB mode if the  
frame rate is set to 24P.  
REC RUN: The time code is advanced only when recording.  
TC PRESET  
(Camera) Sets the initial time code.  
YES NO  
• Set the frame value to 0 or a multiple of 4 when you set recording frame rate  
of recording format to 24P. If any other value is set, the recorded time code will  
mis-match.  
UB PRESET  
EXT TC LINK  
(Camera) Sets the user information.  
YES NO  
(Camera) Synchronizes the initial time code value during multi-camera shooting. (Slave  
camera time codes are synchronized to the master internal TCG value.)  
(Page 55)  
MASTER: Sets the mode to master mode.  
SLAVE: Sets the mode to slave mode.  
When the COUNTER - RESET/TC SET button is pressed, input time  
codes are synchronized to the internal TCG.  
NO:  
Returns to the last screen.  
• Master and slave mode settings are only in effect when this menu is open.  
When the menu is closed, EXT TC LINK is automatically canceled.  
indicates the factory setting.  
92  
AV OUT SETUP screen  
Display  
mode  
Item  
Description of settings  
HDMI OUT SEL (Camera) Sets the output video format of the HDMI OUT terminal.  
(PB) AUTO: Automatically determines the output resolution based on information of  
connected monitors.  
FIX:  
Fix the output at the recorded resolution.  
(Output in 1080 interlaced or 720 progressive mode)  
480P: Output in 480 progressive mode.  
• Simultaneous HDMI and component output is possible only in FIX mode.  
• There will be no VIDEO OUT output when connected with an HDMI cable if this  
item is set to anything other than FIX.  
CMPNT OUT  
SEL  
(Camera) Selects the type of component terminal.  
(PB)  
AUTO: Monitor with D4 terminal (720P/1080i output)  
1080i: Monitor with D3 terminal (1080i output)  
480i:  
Monitor with D1 terminal (480i output)  
• Cross-conversion is only performed when content recorded at 720P is output at  
1080i. Cross-conversion does not take place in other cases.  
DOWNCON  
MODE  
(Camera) Switches down-conversion output mode.  
(PB)  
SIDE CROP: Crops the right and left edges of the image for a 4:3 aspect ratio.  
• Images may extend beyond the boundaries of the screen and be partially  
unable to be seen when outputting from the VIDEO OUT terminal, or when  
outputting from the COMPONENT OUT terminal when the COMPNT OUT SEL  
item is set to 480i.  
LETTER BOX:Adds black bands at the top and bottom of the image to display  
16:9 images on a 4:3 screen.  
SQUEEZE: Squeezes 16:9 images horizontally when displaying on a 4:3  
screen.  
VIDEO SETUP (Camera) Sets the setup level of video signals.  
(PB)  
0%:  
VIDEO OUT terminal output and recording setup levels will both be set  
to 0%.  
7.5% A: VIDEO OUT terminal output setup level will be set to 7.5%, while  
recording setup level will be set to 0%.  
AUDIO OUT  
(Camera) Sets the audio signals to output from the AUDIO OUT pin jack.  
(PB) CH1/CH2: CH1 terminal = CH1 signals, CH2 terminal = CH2 signals  
CH1:  
CH2:  
CH1 terminal = CH1 signals, CH2 terminal = CH1 signals  
CH1 terminal = CH2 signals, CH2 terminal = CH2 signals  
• When an SD Memory Card containing 5.1 channel content, recorded on other  
equipment, is played back on the camera, it is down-mixed to 2 channels when  
output through the AUDIO OUT or headphone terminal.  
HP MODE  
(Camera) Selects the sound heard through the headphones.  
LIVE: The sound which has been input from the microphone is output as  
is. This setting is selected when delays in the sound are annoying.  
RECORDING: The sound in the status which is to be recorded (the sound  
synchronized with the images) is output.  
indicates the factory setting.  
93  
Setup menu list (continued)  
DISPLAY SETUP screen  
Display  
mode  
Item  
Description of settings  
ZEBRA  
(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.  
DETECT1  
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%  
ZEBRA  
DETECT2  
(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.  
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF  
• The zebra patterns do not appear if you select OFF.  
MARKER  
(Camera) Select ON to display the marker. (Page 42)  
ON OFF  
To display the marker, press the ZEBRA button.  
SAFETY ZONE (Camera) Sets SAFETY ZONE. (Page 78)  
90%, 4:3, OFF  
REC COUNTER (Camera) Selects counter operation during recording.  
TOTAL: The count continues to increase until the RESET/TC SET button is  
pressed to reset it.  
CLIP: Resets the counter at start of recording and counts the time of each  
recording session.  
• In PB mode, operation is always in CLIP mode.  
VIDEO OUT  
OSD  
(Camera) Select ON to output the information displayed on the screen together with the  
(PB)  
signals from the VIDEO OUT jack.  
ON OFF  
DATE/TIME  
(Camera) Sets whether to display the date and time on the screen and whether to output  
(PB)  
from the VIDEO OUT jack.  
TIME: The time is displayed.  
DATE: The date is displayed.  
TIME & DATE: The date and time are displayed.  
OFF:  
LEVEL METER (Camera) Select ON to display the audio level meter.  
(PB) ON OFF  
The date and time are not displayed.  
ZOOM &  
FOCUS  
(Camera) Selects the unit of zoom and focus values.  
OFF, NUMBER, mm/feet, mm/m  
• Use the mm/feet or mm/m display only as a general guideline since it is not  
entirely accurate.  
CARD &  
(Camera) Select ON to display the remaining SD Memory Card recording capacity and  
BATTERY  
(PB)  
remaining battery charge.  
ON OFF  
OTHER  
(Camera) Select how much information to display on the viewfinder and the LCD monitor.  
DISPLAY  
(PB)  
(Page 81)  
PARTIAL, ALL, OFF  
LCD  
BACKLIGHT  
(Camera) Adjusts the backlight of the LCD monitor. Select HIGH for brighter backlight.  
(PB) LOW, NORMAL, HIGH  
(Camera) Adjusts the display level of the images on the LCD monitor. (Page 26)  
LCD SET  
(PB)  
LCD COLOR LEVEL  
LCD BRIGHTNESS  
LCD CONTRAST  
EVF SET  
(Camera) Adjusts the display level of the images on the viewfinder. (Page 26)  
(PB)  
EVF COLOR LEVEL  
EVF BRIGHTNESS  
EVF CONTRAST  
indicates the factory setting.  
94  
DISPLAY SETUP screen (continued)  
Display  
mode  
Item  
Description of settings  
SELF SHOOT  
EVF COLOR  
(Camera) Selects the LCD mirror mode for self-portrait shooting. Selecting MIRROR  
displays the left and right side of the LCD monitor image inverted during self-  
portrait shooting. (Page 41)  
NORMAL, MIRROR  
(Camera) Switches viewfinder images to color or black and white.  
(PB)  
ON:  
Color  
OFF:  
Black and white  
indicates the factory setting.  
95  
Setup menu list (continued)  
CARD FUNCTIONS screen  
Display  
mode  
Item  
Description of settings  
CARD  
(Camera) Formats the SD Memory Card.  
FORMAT  
(PB)  
YES:  
NO:  
Formats the card.  
Returns to the last screen.  
CARD STATUS (Camera) Displays the SD Memory Card status.  
(PB)  
YES:  
NO:  
Displays the card status.  
Returns to the last screen.  
CLIP  
(PB)  
Displays information about the selected clip.  
PROPERTY  
YES:  
NO:  
Displays clip information.  
Returns to the last screen.  
USER FILE screen  
Display  
mode  
(Camera) You can save four user file settings to the SD Memory Card, and can also title the  
Item  
Description of settings  
CARD READ/  
WRITE  
(PB)  
saved files.  
READ: Read  
WRITE: Write  
NO:  
Returns to the last screen.  
LOAD/SAVE/  
INIT  
(Camera) LOAD: Loads the settings in a previously stored user file.  
(PB)  
SAVE: Saves the updated user file settings.  
INITIALIZE: Returns the user settings in the user file to the factory settings.  
NO:  
Returns to the last screen.  
• After a LOAD or INITIALIZE operation, turn the POWER switch off and then  
back on again to make the new settings available.  
• The INITIALIZE operations do not change the TIME ZONE settings. (Page 99)  
META DATA screen  
Display  
mode  
Item  
Description of settings  
CARD READ  
(Camera) Loads the metadata recorded on the SD Memory Card into the unit.  
YES NO  
• “NO FILE” is displayed when no metadata is recorded in the SD Memory Card.  
RECORD  
(Camera) Sets whether to record the metadata to be loaded into the unit simultaneously on  
a SD Memory Card.  
ON:  
Records simultaneously.  
OFF:  
Does not record simultaneously.  
USER CLIP  
NAME  
(Camera) Selects the method of USER CLIP NAME recording.  
TYPE1: User clip name is the same as the CLIP NAME if there is no uploaded  
metadata or data.  
TYPE2: User clip name is the same as the CLIP NAME if no combination of data  
and COUNT value is uploaded, or if there is no uploaded data.  
CLIP COUNT  
RESET  
(Camera) Resets the COUNT value to 1.  
YES NO  
META DATA  
PROP  
(Camera) Displays the metadata which has been recorded in the unit.  
YES NO  
indicates the factory setting.  
96  
META DATA screen (continued)  
Display  
mode  
Item  
Description of settings  
META INITIAL  
SET  
(Camera) Initializes the metadata which has been recorded in the unit. All the settings  
including the ON or OFF setting for RECORD are now cleared.  
YES NO  
PLAY SETUP screen  
Display  
mode  
Item  
Description of settings  
PB FORMAT  
(PB)  
Sets the playback format.  
1080/60i (30P), 1080/24P, 720/60P(30P), 720/24P  
• The REC FORMAT setting in the CAM mode prior to transfer to the PB mode  
becomes the initial setting of PB FORMAT.  
REPEAT PLAY (PB)  
RESUME PLAY (PB)  
ON OFF  
When set to ON, supported clips are played repeatedly.  
ON OFF  
When set to ON, playback resumes from the video position at which clip playback  
stopped.  
SKIP MODE  
(PB)  
Selects the starting position for cued playback after pausing.  
CLIP: Stops playback at the beginning of the previous clip.  
CLIP & INDEX: Stops at the beginning of the clip and INDEX.  
THUMBNAIL SETUP screen  
Display  
mode  
Item  
Description of settings  
Selects the thumbnail display method.  
ALL: All the clips are displayed.  
SAME FORMAT: The clips in the same recording format are displayed.  
THUMBNAIL  
MODE  
(PB)  
MARKER:  
INDEX:  
The clips with shot marks are displayed.  
The clips with index are displayed.  
INDICATOR  
(PB)  
Sets whether the indicator is to be displayed or not.  
ON:  
Displayed  
OFF:  
Not displayed  
DATA DISPLAY (PB)  
Selects the information displayed in the time display of clips.  
TC:  
UB:  
Time cord  
User information  
TIME: Shooting time  
DATE: Shooting date  
DATE & TIME:Shooting date and time  
DATE FORMAT (PB)  
Selects the order for displaying the recording date/time when DATE DISPLAY is  
set to DATE or DATE & TIME.  
Y-M-D: year/month/day  
M-D-Y: month/day/year  
D-M-Y: day/month/year  
indicates the factory setting.  
97  
Setup menu list (continued)  
OPERATION screen  
Display  
mode  
Item  
Description of settings  
DELETE  
(PB)  
Deletes clips.  
ALL CLIPS: Deletes all clips.  
SELECT:  
Deletes only the selected clips. Press the EXEC button to delete  
clips.  
NO:  
Returns to the last screen.  
• Clips for which CLIP PROTECT is specified are not deleted.  
INDEX  
(PB)  
Adds indexes to clips or deletes them.  
YES:  
NO:  
Adds or deletes indexes.  
Returns to the last screen.  
CLIP PROTECT (PB)  
Protects clips to prevent accidental deletion.  
YES:  
NO:  
Enables clip protection or cancels protection.  
Returns to the last screen.  
• Executing a format of the memory card (page 32) will delete all clips even if  
they are protected.  
OTHER FUNCTIONS screen  
Display  
mode  
Item  
Description of settings  
IR REMOTE  
(Camera) Sets the operations of the supplied remote control unit.  
(PB)  
ON:  
Accepts commands from the remote control.  
OFF:  
Operations are not accepted from remote control.  
REC LAMP  
(Camera) Sets lighting of the tally lamp.  
FRONT: Front tally lamp (microphone side) lights.  
REAR: Rear tally lamp (viewfinder side) lights.  
BOTH: Both tally lamps light.  
OFF:  
The tally lamp does not light.  
BEEP SOUND  
CLOCK SET  
(Camera) Turns the beep sound ON or OFF.  
ON OFF  
When ON is selected the beep is sounded, if the memory of the SD Memory  
Card has been used up during recording.  
When the beep is sounded, the audio signals from the output connector are  
muted before the beep sound is output.  
(Camera) Sets the camera-recorder’s calendar.  
(PB)  
indicates the factory setting.  
98  
OTHER FUNCTIONS screen (continued)  
Display  
mode  
Item  
Description of settings  
TIME ZONE  
(Camera) Adds to or deducts from GMT the time value of -12:00 to +13:00 in 30-minute  
(PB)  
steps. (Refer to the table below.)  
+00:00  
Time  
difference  
Time  
difference  
Area  
Area  
+ 00:00  
– 01:00  
– 02:00  
– 03:00  
– 04:00  
– 05:00  
– 06:00  
– 07:00  
– 08:00  
– 09:00  
– 10:00  
– 11:00  
– 12:00  
+ 13:00  
+ 12:00  
+ 11:00  
+ 10:00  
+ 09:00  
+ 08:00  
+ 07:00  
+ 06:00  
+ 05:00  
+ 04:00  
+ 03:00  
+ 02:00  
+ 01:00  
Greenwich  
Azores Islands  
Mid-Atlantic  
Buenos Aires  
Halifax  
– 00:30  
– 01:30  
– 02:30  
– 03:30  
– 04:30  
– 05:30  
– 06:30  
– 07:30  
– 08:30  
– 09:30  
– 10:30  
– 11:30  
+ 12:30  
+ 11:30  
+ 10:30  
+ 09:30  
+ 08:30  
+ 07:30  
+ 06:30  
+ 05:30  
+ 04:30  
+ 03:30  
+ 02:30  
+ 01:30  
+ 00:30  
Newfoundland Island  
New York  
Chicago  
Denver  
Los Angeles  
Alaska  
Marquesas Islands  
Hawaii  
Midway Island  
Kwajalein  
Norfolk Island  
Lord Howe Island  
Darwin  
New Zealand  
Solomon Islands  
Guam  
Tokyo  
Beijing  
Yangon  
Mumbai  
Kabul  
Bangkok  
Dacca  
Islamabad  
Abu Dhabi  
Moscow  
Tehran  
Eastern Europe  
Central Europe  
POWER SAVE (Camera) Selects the power-saving mode when either the Operation lever, or the MENU,  
AUDIO MON/ADV, USER, START/STOP, or STAND BY button, has not been  
operated for about 5 minutes while a memory card is inserted in the CAM mode.  
ON:  
OFF:  
The camera-recorder’s power is set to OFF.  
The camera-recorder’s power is not set to OFF.  
• Even when this setting is ON, the power will not turn OFF when an SD Memory  
Card is not inserted, when the camera-recorder is in PB mode or PC mode, or  
when the AC adapter is connected.  
SYSTEM INFO (Camera) Displays the version of the system in this camera.  
(PB)  
MENU INIT  
(Camera) Returns the menu settings (scene file, user file) to the factory settings.  
• TIME ZONE setting will not return to the factory setting.  
OPERATION  
TIME  
(Camera) Displays the power-on time (a 5-digit figure).  
(PB)  
indicates the factory setting.  
99  

Intel M600 User Manual
JVC DT F9L5 User Manual
Kambrook Convection Oven K0T630 User Manual
LG Electronics LG Life Good Computer Monitor L1953H User Manual
MSi MSI Fuzzy 945 GM E3 Mainboard MS 9642 User Manual
Panasonic CQ VX100W User Manual
Philips 25GR9960 User Manual
Philips 32PW6324 User Manual
Philips 190X7FB User Manual
Philips HTS335W User Manual