Palsonic 8110Y User Manual

OWNER'S MANUAL  
81CM CORDLESS REMOTE COLOUR TELEVISION  
MODEL: 8110Y  
Type Tested  
Electrical  
Safety  
AS/NZS 3250 Lic 4166  
Standards Australia  
APP No: N15899  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
Introduction  
Main features  
Features  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hyperband  
256 preset channels  
Automatic channel preset  
2
Intellectualized I C-bus control  
English/Chinese on-screen display  
Full function remote control  
AV input & output terminals  
Clock/Game/Calendar  
Four picture modes  
Four sound modes  
ON timer/OFF timer  
Surround sound  
Channel scan  
Channel edit  
1
Introduction  
Important Safety Precautions  
Safety Precautions  
When any unusual situation occurs, turn off the  
power supply at once and remove the plug from the  
wall outlet. Contact a qualified service department in  
your local area.  
Do not expose the TV set to rain or excessive  
moisture. Avoid using the set in very warm or  
damp places and never use it in a bathroom.  
When cleaning dust off the picture tube disconnect  
the power first. You can wipe lightly with a piece of  
dry, clean and soft cloth.  
Avoid exposing the set to direct sunlight and other  
sources of heat to prevent damage to the cabinet  
and components.  
High voltage exists in this TV set. Do not remove the  
cover.  
2
Do not cover the ventilating hole in the cabinet  
Keep a space of more than 10cm from the walls to the  
TV set to ensure adequate ventilation.  
If the power cord or the plug is damaged contact a  
qualified service department for service.  
When the TV set is to be left unattended for a long  
period of time, turn off the power supply and remove  
the plug from the wall outlet.  
Don't try to push anything into the cabinet or place  
any vessel with water on the TV set.  
Introduction  
Identification of Controls  
Front/Back view  
Front  
POWER SWITCH  
VOLUME  
MENU CHANNEL TV/AV  
TV/AV  
Channel down  
Channel up  
Volume down  
Volume up  
MENU  
Back  
R
AUDIO  
L/MONO  
VIDEO  
AV 3 input  
(VIDEO, AUDIO:  
L/MONO, R)  
(3)  
DVD input  
(VIDEO: Y,CB, CR,  
AUDIO: L/MONO, R)  
AV2 input (VIDEO  
AUDIO: L/MONO, R)  
Antenna input  
(1)  
(2) DVD  
AV1 inputs (S-VIDEO,  
VIDEO, AUDIO: L/MONO, R)  
S-VIDEO  
MONITOR  
AV output  
(VIDEO, AUDIO: L,R)  
VIDEO  
VIDEO  
Y
L/MONO  
L/MONO  
CB  
CR  
L
AUDIO  
R
AUDIO  
R
AUDIO  
R
4
NOTES:  
NOTES:  
5m  
1
4
7
3
6
9
2
5
8
0
CH  
VOL  
VOL  
CH  
SLEEP  
PIC  
EDIT  
SOUND  
GAME  
SYSTEM  
NOTES:  
Introduction  
External Equipment Connection  
(Please refer to the owner's manual of the equipment to be connected as well.  
External Equipment Connection  
To connect AV input terminals  
You can connect video equipment such as a VTR and video camera to this TV and enjoy the high  
quality picture and sound.  
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal  
(special (S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (RCA).  
The S-VIDEO and AV1 use the same group of audio input terminals, and the S-VIDEO input terminal  
has priority over the AV1 VIDEO terminal. To use equipment connected to the VIDEO terminal,  
disconnect any plug from the S-VIDEO terminal.  
To audio outputs  
R
R
R
AUDIO  
L/MONO  
w
Y
w
Y
TV SET SIDE  
VIDEO  
To video output  
Video camera, etc.  
(3)  
Y
W
R
VTR without  
S-VIDEO terminal  
:Yellow (video)  
:White (audio L/MONO)  
:Red (audio R)  
VTR with  
S-VIDEO terminal  
VHS  
VHS  
To S-VIDEO  
output terminal  
R
w
To video  
output  
To audio  
outputs  
W
R
Y
TV SET'S REAR  
To audio  
outputs  
(1)  
S-VIDEO  
(2) DVD  
MONITOR  
VIDEO  
VIDEO  
Y
L/MONO  
L/MONO  
Y
CB  
CR  
L
w
R
w
AUDIO  
R
AUDIO  
R
AUDIO  
R
R
R
w
Y
To video output  
VTR, DVD etc.  
Y
w
R
To audio outputs  
8
NOTES:  
1. Both the C terminal and the audio R terminal are red for easy identification. Make sure  
R
they are correctly connected.  
2. DVD and AV2 use the same group of audio terminals.  
3. DVD has a priority over AV2. If you use DVD input, disconnect VIDEO2.  
To connect AV output terminals  
TV SET'S REAR  
w
R
(1)  
(2) DVD  
S-VIDEO  
MONITOR  
VIDEO  
VIDEO  
Y
L/MONO  
L/MONO  
w
R
CB  
CR  
L
AUDIO  
R
AUDIO  
R
AUDIO  
R
Y
VHS  
R
w
R
W
w
R
Y
Y
NOTES:  
The TV set can turn off automatically by:  
A. Sleep timer function (needs to be set in advance).  
B. OFF timer function (needs to be set in advance).  
Operations  
Select input signal  
Select input signal  
Watching AV program  
This TV set provides AV input terminals for your convenient  
connection to VCR, DVD or other video equipment.  
To watch video program from AV inputs, Press  
1 AV button repeatedly until you see the  
3
6
9
1
4
7
appropriate input indicator on the screen.  
2
5
8
0
VIDEO 2  
VIDEO 3  
VIDEO 1  
10  
Notes:  
CH  
VOL  
VOL  
When S-VIDEO terminal is used, the OSD (on-screen  
display) is S-VIDEO1 instead of VIDEO1.  
CH  
When DVD is used, the OSD is DVD instead of VIDEO 2.  
SLEEP  
PIC  
EDIT  
SOUND  
Switching from AV to TV  
When the TV set is in AV mode, there are three ways for  
you to switch back to TV mode as follows.  
GAME  
Press AV button repeatedly until the TV program  
SYSTEM  
1 appears.  
Press digit buttons to switch to a desired TV  
program.  
2
Press CH+/- button to switch to TV mode.  
3
11  
Operations  
Tuning in  
Auto search/Manual search/To skip unwanted channel  
If you have preset the channels, you can directly watch TV  
programs after turning on the set. If not, then preset channels in  
one of the following ways.  
Auto search  
PICTURE SOUND TIMER TUNING SETUP  
Enter into TUNING menu.  
1
2
3
6
9
1
4
7
2
5
8
0
Press CH+/- to select AUTO  
MEMORY.  
SELECT  
CONFIRM  
Press VOL+ to start Auto  
Search. All active channels  
will be preset and stored into  
the memory automatically.  
After auto search, the TV will  
go to the first channel.  
PICTURE SOUND TIMER TUNING SETUP  
POSITION  
BAND  
3
8
VHFL  
ON  
SKIP  
CH  
SEARCH  
MFT  
AUTO MEMORY  
VOL  
VOL  
CH  
SELECT  
ADJUST  
During the process of Auto  
search, pressing VOL- will  
stop the process and the TV  
will return to the first channel.  
SLEEP  
PIC  
EDIT  
SOUND  
VHFL  
6
ASM  
STOP  
Manual search  
GAME  
If auto search can not preset the desired channels, or you want  
to preset the desired channels one by one with the preferred  
channel numbers, please make use of Manual Search.  
SYSTEM  
1Enter into TUNING menu.  
PICTURE SOUND TIMER TUNING SETUP  
POSITION  
BAND  
SKIP  
8
VHFL  
ON  
Press CH+/- to select  
2
SEARCH  
MFT  
AUTO MEMORY  
POSITION item.  
SELECT  
ADJUST  
Press VOL+/- to select a  
3 number (from 0~255). (You  
can press and hold the button  
to increase or decrease the  
value by 10).  
4 Press CH- to select SEARCH item.  
12  
Press MENU button.  
1
PICTURE SOUND TIMER TUNING SETUP  
2Press VOL+/- to select TUNING icon.  
3
SELECT  
CONFIRM  
Press CH- to enter into TUNING menu.  
Press VOL+ to search  
5towards higher frequency,  
PICTURE SOUND TIMER TUNING SETUP  
the screen displays glittering  
" " press VOL- to search  
toward lower frequency, the  
screen displays glittering " ".  
When a channel is located,  
the searching stops and the  
channel is stored in the  
POSITION  
BAND  
SKIP  
8
VHFL  
ON  
SEARCH  
MFT  
AUTO MEMORY  
SELECT  
ADJUST  
3
6
9
1
4
7
2
5
8
0
specified channel number.  
When searching towards  
higher frequency, pressing VOL-  
will stop the search and return to  
first program. When searching  
towards lower frequency,  
pressing VOL+ will stop the  
search and return to first  
program.  
VHFH  
8
SEARCH  
STOP  
CH  
VOL  
VOL  
CH  
SLEEP  
PIC  
You can also use BAND selection to quicken searching  
EDIT  
SOUND  
process if you know which band your desired program locates in.  
The band switched among UHF, VHFL, VHFH.  
Repeat the above steps if you want to store another program  
in other position number.  
GAME  
To skip an unnecessary channel  
SYSTEM  
After presetting the channels, you may skip unnecessary  
channels so that only the channels you want to watch are  
selected with CH+/- button.  
From TUNING menu select an unwanted channel  
1 number (for example, channel 10).  
Press CH+/- to select SKIP  
2item.  
PICTURE SOUND TIMER TUNING SETUP  
POSITION  
BAND  
SKIP  
8
VHFL  
ON  
Press VOL+/- to set ON.  
SEARCH  
MFT  
AUTO MEMORY  
3Now channel 10 will be skipped  
when you browse channels  
by CH+ or CH- button.  
SELECT  
ADJUST  
To restore a skipped channel, please select the channel  
number from Tuning menu, repeat the above steps to set SKIP  
item to OFF.  
13  
Operations  
Tuning in  
(continued)  
Fine tuning/The setting of colour and sound system  
Fine tuning  
Fine tuning is not necessary under normal conditions.  
However, in area of inferior broadcast conditions where  
adjustment is necessary for a better picture and sound,  
use Fine Tuning.  
3
6
9
1
4
7
1 Enter into TUNING menu.  
2
5
8
0
PICTURE SOUND TIMER TUNING SETUP  
POSITION  
BAND  
SKIP  
8
VHFL  
ON  
2Press CH+/- to select MFT.  
SEARCH  
MFT  
AUTO MEMORY  
Press VOL+ or VOL- to fine  
3
SELECT  
ADJUST  
tune until the best possible  
picture and sound are  
CH  
obtained.  
VOL  
VOL  
Note: if some channel's colour or sound is abnormal, it may be  
that the setting of colour or sound system is wrong, please  
do the following adjustment to set the proper colour and  
sound system.  
CH  
SLEEP  
PIC  
EDIT  
SOUND  
The setting of colour and sound system  
In factory the TV set's colour system has been preset to  
AUTO. If you want to change the system, please do the  
following steps:  
GAME  
Press SYSTEM button to display the colour and sound  
system menu.  
SYSTEM  
If the picture's colour is  
abnormal, enter into the  
SYSTEM menu, press CH+/-  
to select COLOR, press  
VOL+/- to select a proper  
colour system.  
1
COLOR  
AUTO  
I
SOUND  
SELECT  
ADJUST  
If the sound is abnormal.  
enter into the SYSTEM menu,  
press CH+/- to select  
SOUND, press VOL+/- to  
select a proper sound  
system.  
2
COLOR  
SOUND  
AUTO  
I
SELECT  
ADJUST  
In some model there is only  
one sound system and in this  
case the sound system does  
not need to be adjusted.  
14  
Operations  
Channel selection  
Making use of direct select buttons  
Use direct selection buttons  
To select one-digit channel  
1
--  
Method 1: press 0-9 button  
and wait for 2 seconds.  
X
after 2 seconds  
X
3
6
9
1
4
7
2
5
8
0
Method 2: press 0 button twice, and then press the channel  
number. Be sure the period of two-press should be within 2  
seconds.  
Method 3: press 0 button, then input the number and wait  
for 2 seconds. Be sure the period of two-press should be  
within 2 seconds.  
CH  
VOL  
VOL  
2To select two-digit channel  
CH  
Method 1: Input the channel  
number using the digit  
buttons and wait for 2  
seconds. Be sure the period  
of two-press should be within  
2 seconds.  
SLEEP  
PIC  
--  
X
EDIT  
SOUND  
-
X X  
after 2 seconds  
X X  
GAME  
SYSTEM  
Method 2: press 0 button, and then input the channel  
number. Be sure the period of two-press should be within 2  
seconds.  
--  
X
3 To select three digit channel  
Just input the channel  
-
number. Be sure the period of  
two-press should be within 2  
seconds.  
X X  
X X X  
Note: the maximum channel number is 255.  
15  
Operations  
Channel selection  
(continued)  
Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit  
Use Channel up/down buttons  
1Press CH+ button, the channel number increases.  
2Press CH- button, the channel number decreases.  
3
6
9
1
4
7
Use Previous channel button  
2
5
8
0
Press  
button to switch between the current channel and the  
previous channel.  
For example, the channel you previously watched is 11, the  
current channel is 2, press the button, it will return to channel 11,  
press the button again it will return to channel 2.  
3
CH  
VOL  
VOL  
Channel scan  
Press SCAN button, the set will  
CH  
scan the channel from the  
2
SLEEP  
PIC  
current channel to higher  
channels one by one until all the  
programs are scanned over and  
then stop. During scanning,  
pressing any button will stop it  
and the screen will settle at the  
current scanned program.  
EDIT  
SOUND  
CHANNEL SCANNING  
GAME  
Channel edit  
SYSTEM  
Press EDIT button to display  
CHANNEL EXCHANGE  
menu.  
1
Press CH+/- to select  
CHANNEL 1, use VOL+/- to  
set the number which you  
want to swap, for example,  
channel 6.  
CHANNEL EXCHANGE  
2
CHANNEL 1  
CHANNEL 2  
EXCHANGE  
6
10  
SELECT  
ADJUST  
Press CH+/- to select  
You can press DSP button  
twice to display the current  
time of the TV set, press  
again to cancel.  
3 CHANNEL 2, use VOL+/- to  
set the number which you  
want to swap to, for example,  
channel 10.  
Press CH- to select EXCHANGE, press VOL+ or VOL- and  
4the channel 6 and 10 are swapped.  
Repeat the above steps to edit the programs in your favourite  
order.  
16  
Operations  
Picture adjustment  
Picture adjustment  
To select the picture mode  
You can select the picture quality instantly among three  
modes and one user-set mode.  
Press the PIC button to select the desired picture quality.  
BRILLIANT, STANDARD, SOFTNESS and PERSONAL  
(user-set) can be selected cyclically.  
3
6
9
1
4
7
2
5
8
0
BRILLIANT  
STANDARD  
SOFTNESS  
PERSONAL  
Picture quality  
Mode  
Display more brightness and contrast pictures  
Display normal pictures  
BRILLIANT  
STANDARD  
SOFTNESS  
PERSONAL  
CH  
VOL  
VOL  
Display mild pictures  
The picture quality you set  
CH  
SLEEP  
PIC  
EDIT  
SOUND  
Adjusting picture  
PICTURE SOUND TIMER TUNING SETUP  
1 Press MENU button.  
SELECT  
CONFIRM  
Press VOL+ or VOL- button to  
GAME  
2
select PICTURE icon.  
SYSTEM  
PICTURE SOUND TIMER TUNING SETUP  
CONTRAST  
BRIGHT  
COLOR  
SHARP  
NOISE REDU.  
40  
50  
50  
50  
OFF  
Press CH- to enter into the  
PICTURE menu.  
3
In PICTURE menu, press CH+/-  
4
SELECT  
ADJUST  
to select the desired item, press  
VOL+/- to adjust.  
CONTRAST  
50  
Item  
Contrast  
Brightness  
Colour  
VOL-  
weaker  
darker  
paler  
VOL+  
stronger  
lighter  
deeper  
greenish  
sharper  
Tint  
purplish  
softer  
Sharpness  
Noise reducer  
ON/OFF  
Notes:  
Tint is only for NTSC system.  
The adjusted level is stored in the PERSONAL position.  
17  
Operations  
Sound adjustment  
Sound adjustment  
Adjusting volume  
Use VOL+ or VOL- button.  
Press VOL+ button, the volume  
increases;  
1
Press VOL- button, the volume  
decreases.  
VOLUME  
50  
3
6
9
1
4
7
2
5
8
0
2Use  
(MUTE) button.  
If you want to mute the sound,  
press button on the remote  
control.  
To restore the sound, press  
this button again.  
CH  
VOL  
VOL  
Notes:  
CH  
You can also restore the sound by pressing VOL+ or VOL-  
SLEEP  
PIC  
button.  
EDIT  
SOUND  
GAME  
SYSTEM  
18  
Adjusting sound  
PICTURE SOUND TIMER  
TUNING SET UP  
BASS  
TREBLE  
BALANCE  
S.WOOFER  
S.WOOFER  
SURROUND  
+20  
+30  
±00  
OFF  
50  
Press MENU button.  
1
Press VOL+ or VOL- button  
to select SOUND icon.  
Press CH- to enter into  
SOUND menu.  
OFF  
2
SELECT  
ADJUST  
3
6
9
1
4
7
2
5
8
0
BASS  
+16  
In SOUND menu press  
CH+/- to select desired item,  
press VOL+/- to adjust.  
3
Item  
BASS  
VOL-  
VOL+  
CH  
Weaker  
Weaker  
Stronger  
Stronger  
VOL  
VOL  
TREBLE  
Decrease the  
right channel  
Decrease the  
left channel  
CH  
BALANCE  
SLEEP  
PIC  
S.WOOFER  
S.WOOFER  
SURROUND  
ON/OFF  
EDIT  
SOUND  
Stronger  
Weaker  
OFF/HARD/SOFT/STEREO  
Note: if in the TV (RF) mode, Surround sound can be switched  
between OFF and Stereo. In VIDEO or DVD mode, Surround  
sound can be switched between OFF/SOFT/HARD.  
GAME  
SYSTEM  
Sound mode selection  
You can select the sound quality instantly among three preset  
modes and one user-set mode.  
Press the SOUND button to select the desired sound quality.  
THEATRE, NEWS, MUSIC and PERSONAL (user-set) can be  
selected cyclically.  
THEATRE  
NEWS  
MUSIC  
PERSONAL  
Mode  
Sound quality  
THEATRE Like a movie theatre filled with a dynamic sound.  
NEWS  
MUSIC  
Suitable for listening to news/dialogue.  
Like a music hall filled with a rich warm sound.  
PERSONAL The sound quality you set.  
19  
Operations  
System setup  
System setup  
Selecting OSD language  
1Press MENU button.  
PICTURE SOUND TIMER TUNING SETUP  
Press VOL+ or VOL- to  
2
select SETUP icon.  
3
6
9
1
4
7
2
5
8
0
SELECT  
CONFIRM  
Press CH- to enter into  
SETUP menu.  
3
Press CH+/- to select  
LANGUAGE.  
4
PICTURE SOUND TIMER TUNING SETUP  
LANGUAGE  
DEMO  
ENG/  
STOP  
OFF  
CH  
B.B.  
CALENDAR  
VOL  
VOL  
Press VOL+/- to select  
English or Chinese (  
5
CH  
)
SELECT  
ADJUST  
SLEEP  
PIC  
EDIT  
SOUND  
Menu demonstration  
GAME  
SYSTEM  
1Enter into SETUP menu.  
2Press CH+/- to select DEMO.  
PICTURE SOUND TIMER TUNING SETUP  
LANGUAGE  
DEMO  
B.B.  
ENG/  
START  
OFF  
CALENDAR  
Press VOL+ or VOL- to select  
START and the TV starts the  
menu demonstration, which  
shows you how to use the  
menu.  
3
SELECT  
ADJUST  
After the demonstration, it will return to SETUP menu and the  
DEMO item is auto set to STOP. After 4 seconds it exits the  
menu automatically.  
20  
Setting Blue Background option  
Enter into SETUP menu.  
1
2
3
PICTURE SOUND TIMER TUNING SETUP  
LANGUAGE  
DEMO  
B.B.  
ENG/  
STOP  
ON  
Press CH+/- to select B.B.  
CALENDAR  
Press VOL+/- to select On or  
Off.  
3
6
9
1
4
7
2
5
8
0
SELECT  
ADJUST  
If the B.B is set to On, the TV set will display a blue  
background when there is no input signal.  
If the B.B is set to Off, the TV will display snowy picture when  
there is no input signal.  
CH  
VOL  
VOL  
Calendar  
PICTURE SOUND TIMER TUNING SETUP  
CH  
SOLAR  
LUNAR  
SLEEP  
PIC  
1Enter into SETUP menu.  
EDIT  
SOUND  
SELECT  
ADJUST  
Press CH+/- to select  
2
3
CALENDAR item.  
GAME  
PICTURE SOUND TIMER TUNING SETUP  
LANGUAGE  
DEMO  
B.B.  
ENG/  
STOP  
OFF  
Press VOL+/- to enter into  
calendar sub-menu. Press  
CH+/- to select SOLAR or  
LUNAR, press VOL+/- to enter.  
SYSTEM  
CALENDAR  
SELECT  
ADJUST  
OCT 2008  
SU MO TU WE TH FR SA  
After entering into SOLAR  
or LUNAR calendar, press  
CH+/- to select year and press  
VOL+/- to select month.  
4
2
9
16  
23  
30  
4
3
1
8
11  
18  
26  
10  
17  
25  
31  
7
5
6
14 15  
21 22  
28 29  
12 13  
19 20  
26 27  
YEAR  
MONTH  
21  
Operations  
Timer setting  
Clock/ON timer/OFF timer/Sleep timer  
Setting clock  
1Enter into TIMER menu.  
2Press CH- to select CLOCK.  
PICTURE SOUND TIMER TUNING SETUP  
OFF TIMER  
OFF  
0 : 00  
OFF  
ON TIMER  
0 : 00  
8
POS  
CLOCK  
12:16:28  
3
6
9
1
4
7
2
5
8
0
Press VOL+ or VOL- to set  
the current time for the set.  
SELECT  
ADJUST  
3
Note: Before setting the ON timer or OFF timer, please first  
set the clock.  
Setting ON timer  
CH  
With the ON timer, the TV will automatically turn on to a preset  
channel at a preset time.  
VOL  
VOL  
CH  
In TIMER menu, press CH+/-  
to select ON TIMER.  
1
SLEEP  
PIC  
PICTURE SOUND TIMER TUNING SETUP  
EDIT  
SOUND  
OFF TIMER  
OFF  
0 : 00  
EVERY  
0 : 00  
Press VOL+ or VOL- to  
select ONCE or EVERY.  
If you set On Timer to Once,  
this function occurs once. If  
you set On Timer to Every,  
this occurs every day. To  
cancel this function, set On  
Timer to Off.  
ON TIMER  
2
POS  
CLOCK  
8
12 : 16 : 28  
SELECT  
ADJUST  
GAME  
SYSTEM  
PICTURE SOUND TIMER TUNING SETUP  
OFF TIMER  
OFF  
0 : 00  
EVERY  
18 : 30  
8
Press CH- button, use  
VOL+/- to set the ON time.  
ON TIMER  
3
4
POS  
CLOCK  
12 : 16 : 28  
Press CH- button to select  
POS item, use VOL+/- to  
select a channel number.  
SELECT  
ADJUST  
If the set is in standby mode,  
it will auto turn on and  
broadcast the preset  
channel at the preset time. If  
in normal working mode, the  
set will auto switch to the  
preset channel at the preset  
time.  
PICTURE SOUND TIMER TUNING SETUP  
OFF TIMER  
OFF  
0 : 00  
You can press DSP button  
twice to display the current  
time of the TV set, press  
again to cancel.  
ON TIMER  
EVERY  
0 : 00  
POS  
18  
CLOCK  
12 : 16 : 28  
SELECT  
ADJUST  
Note: You must set ON TIMER to ONCE or EVERY prior to  
setting the time.  
22  
Press MENU button.  
1
PICTURE SOUND TIMER TUNING SETUP  
2Press VOL+/- to select TIMER icon.  
3
SELECT  
CONFIRM  
Press CH- to enter into TIMER menu.  
Setting OFF timer  
With the OFF timer. the TV will automatically switch to standby  
mode at a preset time.  
PICTURE SOUND TIMER TUNING SETUP  
In TIMER menu, press CH+/-  
to select OFF TIMER.  
OFF TIMER  
EVERY  
0 : 00  
1
2
ON TIMER  
EVERY  
0 : 00  
3
6
9
1
4
7
2
5
8
0
POS  
CLOCK  
18  
12 : 16 : 28  
Press VOL+ or VOL- to select  
ONCE or EVERY.  
SELECT  
ADJUST  
If you set Off Timer to Once.  
this occurs only once; If you  
set Off Timer to Every, this  
occurs every day. TO cancel  
this function, set Off Timer to  
Off.  
PICTURE SOUND TIMER TUNING SETUP  
OFF TIMER  
EVERY  
23 : 16  
EVERY  
0 : 00  
CH  
ON TIMER  
VOL  
VOL  
POS  
CLOCK  
18  
12 : 16 : 28  
CH  
Press CH- button.  
SELECT  
ADJUST  
SLEEP  
PIC  
3
EDIT  
SOUND  
Press VOL+ or VOL- to set the OFF time. The TV will turn  
4off at the designated time.  
Note: to enable the OFF timer, you must first set Off Timer to  
Once or Every. When you are setting the time by VOL+/-  
button, if you press and hold, the time will increase or  
decrease by 10 minutes.  
GAME  
SYSTEM  
Setting Sleep timer  
You can quickly set the  
sleep timer by using SLEEP  
button on the remote control.  
With every press of this button  
SLEEP: 60 MIN.  
the sleep time changes in the  
sequence of OFF, 120  
MIN., 110MIN., ---- 10MIN.  
For example, you would like the TV to turn off in 60 minutes,  
you can press the SLEEP button repeatedly until the screen  
displays 60 MIN.  
To cancel the sleep timer, you can press the SLEEP button  
repeatedly until OFF is displayed on the screen.  
23  
Operations  
Playing games  
Playing games  
There are two built-in games for you to play: one is Falling cube,  
the other is Submarine.  
Making use of Falling cube  
SCORE  
0 RECORD: 100  
Press GAME button once to enter  
into Falling cube game interface.  
1
3
6
9
1
4
7
Press any one of / / /  
buttons to start the game.  
LEVEL  
1
2
5
8
0
2
On the screen, there are falling cubes. Pressing button can change  
the cubes' shape; Pressing or buttons can move the cubes  
leftward or rightward while pressing button can hasten the cubes'  
falling speed.  
CH  
When at the screen's left playing area one row has been filled with the  
cubes, the row will disappear, and your score will gain one point. If two  
rows disappear at the same time, your score will gain three points. If  
three rows disappear at the same time, your score will gain seven  
points.  
VOL  
VOL  
CH  
SLEEP  
PIC  
The right window provides hints about next cubes' shape, you can  
arrange current cubes' position and angle in advance.  
EDIT  
SOUND  
When the cubes reach to top, the screen will display GAMEOVER,  
and the game is over.  
GAME  
3 Press GAME button to exit.  
Making use of Submarine  
Press GAME button twice to  
SYSTEM  
1
enter into Submarine game  
interface.  
SCORE :  
000  
2 Press any one of / / / buttons to start the game.  
On the screen there are torpedoes falling occasionally. You can control  
the yellow Submarine by / /  
/
, buttons. Pressing , , or  
buttons can move the yellow Submarine upward, downward, leftward  
or rightward. Press Channel down (CH-) button to shoot cannonball.  
Every time you hit a torpedo or opponent submarine, you gain 100  
points.  
If the yellow submarine is hit by torpedo or opponent submarine, the  
game is over (GAMEOVER).  
To restart the game, press CH+ button.  
3
4Press GAME button to exit.  
24  
Other  
Troubleshooting Guide  
Troubleshooting Guide  
Before calling service personnel, please check the following chart for a possible cause to the trouble  
you are experiencing.  
Symptoms  
Check the following items  
Be sure the power cord is plugged in.  
Contrast, colour, tint are not correctly adjusted  
Power is not turned on  
Poor colour, poor tint  
Possible interferences of automobiles, motorcycle,  
trolley bus, neon lamps, etc.  
Spots appear on the screen  
Possible interference of electronic interference  
from another TV set, a computer, an electronics  
game machine, a broadcast station, etc.  
Stripes appear on the screen  
Double images or "ghosts"  
Snowy picture  
This may be caused by reflections from nearby  
mountains or buildings.  
Check the antenna direction.  
It is possible that the aerial "lead-in" is damaged or  
comes off.  
Check the antenna direction.  
Even if the picture or the sound is normal, changes  
in room temperature sometimes makes the TV  
cabinet expand or contract, making a noise. This  
does not indicate a malfunction.  
TV cabinet creaks  
The batteries may be worn out.  
The batteries may be installed with their polarity  
reversed.  
Remote controller does  
not work  
When the set is switched on, do not shift or move  
the set around. Sometimes it may develop an  
unevenness in colour in some parts of the screen.  
This can be eliminated by switching off the set with  
the POWER switch and wait for 10 minutes before  
switching on again.  
Unevenness in colour in  
some parts of the screen  
Check whether the Child Lock is set to On.  
The screen is black  
25  
PALSONIC CORPORATION PTY LTD  
1 JOYNTON AVENUE  
WATERLOO NSW 2017 AUSTRALIA  
TEL: (02) 9313 7111  
FAX: (02) 9313 7555  
PALSONIC CUSTOMER SERVICE  
TELEPHONE  
AUSTRALIA: 1300 657 888  
604-W3483-00  

JVC AV 21QMG7B User Manual
KitchenAid KECC568GWH1 User Manual
KitchenAid KECT305V User Manual
MSi FUZZY 945GME1 User Manual
Panasonic CT 30WX50 User Manual
Philips 21PT2304 User Manual
Philips 32PFL5X06H User Manual
Philips 42HFL5580 User Manual
Philips 107E05 User Manual
Philips MCP9360i User Manual