OWNER'S MANUAL
76CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 7610WSPF
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15900
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Main features
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hyperband
Automatic channel preset
Full function remote control
21-pin scarts and AV input/output (RCA) jacks
Selectable picture and selectable sound
NICAM and German stereo/bilingual broadcasts (option)
Teletext
ON Timer, OFF Timer
Real Clock (with teletext signal)
Channel swap
Child lock (option)
Hotel lock (option)
Digital comb-filter
SMV (scan velocity modulation) (option)
Black stretch, CTI (Colour Transient Improver) function
Game
AVL (automatic volume level) (option)
Bass/Treble/Balance control
MSS (Micronas surround sound) (option)
DBE (Dynamic Bass Enhanced) (option)
Picture rotate (option)
1
Safety precautions
Identification of Controls
Front/Side
AV(3)/SVHS
Earphone jack
S-VIDEO
VIDEO
L/MONO
R
AV3 input/S-VHS input
(S-VIDEO, VIDEO,
AUDIO (L/MONO, R))
POWER SWITCH
REMOTE SENSOR
INDICATOR
INDICATOR
VOL+
VOL-
CH+
Volume up
Volume down
Channel up
Channel down
AV/TV
CH-
AV/TV
MENU
Menu
Back
Antenna input
AV2 (scart)
AV(2)
AV(1)
OUT
AV1 (scart)
VIDEO
AV output (VIDEO,
AUDIO (L/MONO, R))
L/MONO
R
4
Identification of Controls
Remote controller
Power on/standby
Hold (teletext)
Real clock (teletext)
Reveal/conceal (teletext)
Mix (teletext)
Size (teletext)
?
Index (teletext)
Teletext/TV
Sound mute
i
Enter into Earphone state
3
6
9
1
4
7
2
5
8
Direct channel select
TV/VIDEO input select
Previous program
0
/AV
Digit select
--/
---
CH
MENU
Return to TV mode/Clear the menu
VOL
VOL
-
+
Volume up/down
Menu item adjust
Channel up/down
Menu item select
CH
-
CYAN (teletext), Child lock
GAME
LOCK
Red (teletext) Game playing
P.M
S.M
YELLOW (teletext)
Picture mode select
GREEN (teletext),
Sound mode select
+
-
+
Brightness control (teletext)
Contrast control (teletext)
-
Stereo/Mono/Bilingual select
Retain on-screen display
SOUND
+
5
Install two "AAA" batteries
matching the +/- polarities
of the battery to the +/-
marks inside the battery
compartment.
-
.
Notes:
External equipment connections
Using the side AUDIO/VIDEO Jacks
The optimal use for the side A/V jacks are to connect an A/V component that is used only occasionally, such as a
camcorder or video game. Connect the Audio/Video output jacks of the external unit to the Audio Input jacks and
the Video Input jacks.
The figure below shows how to connect the AV3 input jacks to video equipment.
AV(3)/SVHS
Y
W
R
Yellow (video)
TV SET SIDE
White (audio L/MONO)
Red (audio R)
To access the unit connected
to these jacks, press 0/AV
button until AV3 appears on
the screen.
S-VIDEO
VIDEO
L/MONO
R
Video game
Y
W
R
Signal
To video
output
To audio
outputs
The figure below shows how to connect the SVHS input to video equipment.
AV(3)/SVHS
To access the unit connected
to these jacks, press 0/AV
button until AV3 SVHS
appears on the screen.
TV SET SIDE
S-VIDEO
Signal
To audio
outputs
To S-VIDEO
output
W
R
VIDEO
L/MONO
R
White (audio L/MONO)
W
R
Camcorder, etc.
Red (audio R)
Note: The S-VIDEO input terminal has priority over AV3 VIDEO terminal. To use equipment connected
to AV3 VIDEO terminal, disconnect any plug from the S-VIDEO terminal.
8
External equipment connections
To connect the 21-Pin Scarts
This TV set is equipped with 21-Pin Scarts for your desired equipment to be connected.
The figure below shows how to connect the AV1 SCART to video equipment.
To access the unit connected to
AV1 SCART, press the 0/AV
button until AV1 appears on the
screen.
21-pin SCART
connector
OUT
Video equipment
DVD player, etc.
VIDEO
If the signal source is RGB
signal, the OSD will be AV1
RGB.
L/MONO
R
21-pin SCART
Converter
Note: If the equipment you want to connect is not equipped with 21-pin Scart, you can connect it by using
the 21-pin Scart Convertor (supplied) as illustrated above.
The figure below shows how to connect the AV2 SCART to video equipment.
21-pin SCART
AV2 SCART, press the 0/AV
connector
button until AV2 appears on the
screen.
OUT
Video equipment
VIDEO
L/MONO
R
If the signal source is RGB
signal, the OSD will be AV2
RGB.
DVD player, etc.
21-pin SCART
Converter
Note: If the equipment you want to connect is not equipped with 21-pin Scart, you can connect it by using
the 21-pin Scart Convertor (supplied) as illustrated above.
To connect the AV Outputs
You can connect a stereo system to the AV output jacks on the TV set rear to enjoy a high-quality sound from
the stereo system, or you can connect the AV output jacks to the VTR to record the program you like.
To external input
W
R
OUT
VIDEO
W
R
Signal
L/MONO
R
Stereo System
Y
W
R
Yellow (video)
Another VTR for
recording
White (audio L/MONO)
Red (audio R)
Y
W
R
Y
W
R
VHS
Signal
9
Power on/off
Turning on
1
Press the Power Switch on the TV set.
(On/standby)
Now the standby indicator lights up, the TV set is in
STANDBY mode. Now please follow step 2.
?
In STANDBY mode, press the button or 0-9
digit button on the remote controller and the
TV set is turned on.
2
i
In STANDBY mode, you can also press Channel
up/down or AV/TV button on the set to turn on the set.
0-9 digit
buttons
3
6
9
1
4
7
2
5
8
0/AV
--/
---
Turning off
CH
Press the Power Switch on the TV set if you
want to cut off the power completely.
1
2
VOL
VOL
+
-
CH
-
GAME
LOCK
If you want to turn off the TV set temporarily,
press the button.
P.M
S.M
+
-
+
-
SOUND
+
10
Selecting input signal
Watching AV program
This TV set provides AV input terminals and 21 -pin scarts
for your convenient connection to VCR, DVD or other
video equipment.
?
To watch video program from AV inputs or 21-
1
i
pin scarts, Press 0/AV button repeatedly until
you see the appropriate input indicator on the
screen.
3
6
9
1
4
7
2
5
8
2
AV2
AV3
AV1
Auto B/G
MONO
AV button
(TV/VIDEO
input select)
Notes:
0/AV
--/
---
When the signal source input through AV1/AV2 is RGB
signal, the OSD is AV1 RGB/AV2 RGB.
CH
OK button
VOL
VOL
+
When AV3 S-VIDEO is used, the OSD is AV3 S-VHS.
-
CH
-
CH+/- button
GAME
LOCK
P.M
S.M
Switching from AV to TV
+
When the TV set is in AV mode, there are three ways for
you to switch back to TV mode as follows.
-
+
-
Press 0/AV button repeatedly until the TV
program appears.
1
SOUND
+
Press the OK button to switch back to TV
mode.
2
Press CH+/- button to switch back to TV mode.
3
11
Tuning in
Automatic Tuning
Tuning
1
2
Press MENU repeatedly to
display Tuning menu.
P+
Automatic tuning
Manual tuning
P-
?
-
+
i
Tuning
P+
Automatic tuning
Manual tuning
3
6
9
1
4
7
Press CH+ or CH- to select
Automatic tuning.
2
5
8
P-
-
+
0/AV
--/
Automatic tuning
---
MENU
3 Press VOL+ to start automatic
tuning. All active channels will
be preset and stored into
Program
Band
5
CH+/-
VHF L
>>
CH
(menu item
select)
VOL
VOL
+
-
VOL+/-
(volume adjust
menu item adjust)
memory automatically.
CH
-
GAME
LOCK
OK
(exit the menu)
P.M
S.M
After automatic tuning, the set will return to the first
channel program.
+
-
+
During automatic tuning, pressing OK button will stop the
process.
-
SOUND
Note:
Before Automatic tuning, we recommend you to set a
proper Sound System according to your local area. (see
page 15)
+
* To exit the menu, press OK button.
12
Tuning in
Manual tuning
If automatic tuning can not preset the desired channels, or you
want to preset the desired channels one by one with the
preferred channel numbers, please make use of Manual tuning.
Tuning
1
Repeatedly press MENU to
enter into Tuning menu.
?
P+
i
Automatic tuning
Manual tuning
2
Press CH+ or CH- to select
Manual tuning.
3
6
9
P-
1
4
7
-
+
2
5
8
3
Press VOL+/- to enter into
Manual tuning sub-menu.
Manual tuning
P+
5
Program
Band
Manual search
Fine Tune
VHF L
4 In Manual tuning sub-menu,
press CH+/- to select
0
/AV
--/
---
MENU
Program, use VOL+/- to
select a number, or you can
directly input the number by
digit buttons.
P-
CH+/-
(menu item
select)
-
+
CH
VOL
VOL
+
-
Manual tuning
VOL+/-
(volume adjust
menu item adjust)
P+
5
CH
-
Program
Band
Manual search
Fine Tune
5 Press CH+/- to select
Manual search, press
VHF L
>>
GAME
LOCK
OK
VOL+/- to start searching.
The VOL- searches towards
lower frequency; the VOL+
towards higher frequency.
When a channel is located,
the searching stops and the
channel is stored in the
(exit the menu)
P.M
S.M
P-
-
+
+
-
+
-
specified position number.
SOUND
+
Manual tuning
Notes:
P+
5
Program
Band
Manual search
Fine Tune
1.
In manual tuning, you can also
use BAND selection to
quicken searching process if
you know which band your
desired program locates in.
The band switches among
VHF L, VHF H and UHF.
VHF L
>>
P-
-
+
2.
Repeat the above 1-5 steps if you want to store another
program in other position number.
* To exit the menu, press OK button.
13
Tuning in
Fine tuning
Fine tuning is not necessary under normal conditions.
However, in area of inferior broadcast conditions where
adjustment is necessary for a better picture and sound,
use Fine tuning.
1
Tuning
Select a channel you want to
fine-tune (for example:
channel 28).
?
P+
i
Automatic tuning
Manual tuning
Press MENU repeatedly to
display Tuning menu.
2
3
P-
3
6
9
-
1
4
7
+
+
+
2
5
8
Digit buttons
MENU
Tuning
P+
Press CH+/- to select
Manual tuning, press
VOL+/- to enter into Manual
tuning sub-menu.
Automatic tuning
Manual tuning
0
/AV
--/
---
P-
-
CH+/-
(menu item
select)
4 Press CH+/- to select Fine
CH
tune.
VOL
VOL
+
Manual tuning
-
P+
VOL+/-
(volume adjust
menu item adjust)
Program
Band
CH
-
5 Press VOL+/- to begin fine
tuning until the best possible
picture and sound are
obtained.
Manual search
Fine Tune
GAME
LOCK
OK
(exit the menu)
P-
P.M
S.M
-
+
-
+
-
SOUND
+
* To exit the menu, press OK button.
14
Tuning in
Setting Colour System
If some channel's colour is abnormal, it may be that the
setting of the colour system is wrong, please do the
following steps to set a proper colour system.
Special functions
1
Press MENU repeatedly to
display Special functions
menu.
?
P+
English
On
Language
Blue back
Rotate
i
50
Off
Auto
B/G
-
Child lock
Color system
Sound system
2
3
Press CH+/- to select Color
system.
3
6
9
P-
1
4
7
+
2
5
8
Press VOL+/- to select a
proper colour system.
0/AV
--/
---
MENU
CH+/-
Setting Sound System
CH
(menu item
select)
VOL
VOL
+
If some channel's sound is abnormal, it may be that the
setting of the sound system is wrong, please do the
following steps to set a proper sound system.
-
VOL+/-
(volume adjust
menu item adjust)
CH
-
GAME
LOCK
OK
1
2
3
Enter into Special
functions menu.
(exit the menu)
P.M
S.M
+
Special functions
-
+
Press CH+/- to select
Sound system.
P+
English
On
50
Language
Blue back
Rotate
-
Off
Auto
B/G
Child lock
Color system
Sound system
SOUND
Press VOL+/- to select a
proper sound system.
P-
-
+
+
Some models are only with
one sound system and in this
case the Sound System
does not need to be adjusted.
* To exit the menu, press OK button.
15
Channel delete & to order the channels
To delete an unnecessary channel
After presetting the channels, you may delete unnecessary
channels so that only the channels you want to watch are
selected.
Use digit buttons or channel
up/down button to select a
1
?
channel you want to delete
(for example: channel 18).
i
Program sort
P+
2
Press MENU repeatedly to
display Program sort menu.
Swap Prg A
Swap Prg B
3
6
9
1
4
7
2
Delete Prg
018
Press CH+/- to select
Delete Prg.
3
4
Digit buttons
MENU
5
P-
x
-
+
8
Press the S.M button to confirm.
Please wait for some time until the "Delete Prg" menu
item does not glitter (for the system needs time to delete
program)
0
/AV
--/
---
CH+/-
(menu item
select)
CH
Now channel 18's program is deleted, and channel 19's
program move to channel 18, and so on.
VOL
VOL
+
-
VOL+/-
(volume adjust
menu item adjust)
CH
-
GAME
LOCK
To order the channels
OK
(exit the menu)
P.M
S.M
You can edit the channel programs in your favourite order.
S.M (confirm button)
+
1
Press MENU repeatedly until Program sort menu
appears.
Cancel the inputting
-
+
-
2
Press CH+/- to select
Program sort
Swap Prg A, use VOL+/- to
SOUND
P+
select a program number, or
Swap Prg A
Swap Prg B
Delete Prg
027
---
you can directly press digit
buttons to input the number,
for example, 23.
+
P-
x
-
+
3
4
Press CH+/- to select Swap
Prg B, use VOL+/- to select
a program number, or directly
press digit buttons to input
the number, for example:
37. (If wrong in inputting, you
can press RED button to
cancel and input again.)
Program sort
P+
Swap Prg A
Swap Prg B
Delete Prg
027
037
P-
x
-
+
Press S.M button to confirm.
Now program 23 and
program 37 are swapped.
* To exit the menu, press OK button.
Repeat the above steps to edit the programs in your
favourite order.
16
Channel selection
1
Use Direct Channel Select buttons
To select one-digit channel:
Press --/--- button to display "-", then input the number.
Press
"--/---" button
Press 0-9 button
5
-
?
i
To select two-digit channel:
Press --/--- button to display "--", then input the number.
3
6
9
1
4
7
2
5
8
Digit buttons
(Digit select)
Press
Press
Press
"--/---" button
0-9 button
0-9 button
--
5-
56
0
/AV
--/
---
To select three-digit channel:
Press --/--- button to display "---", then input the number.
CH
VOL
VOL
CH+/-
(Channel
up/down)
-
+
---
(Previous
program)
1--
15-
156
CH
-
Press
"--/---" button
Press
0-2 button
Press
0-9 button
Press
0-9 button
GAME
LOCK
* In this model the maximum channel number is 255.
P.M
S.M
+
-
+
2
3
Use CH+ or CH- button
Press CH+ button, the channel number increases;
Press CH- button, the channel number decreases.
-
Retain
on-screen
display)
SOUND
+
Use previous program button (
)
Press this button to switch between the current program
and the previous one.
Notes:
+
Use on-screen display button (
) to know
the current channel number
Press this button to display the
current TV state. If in TV program
viewing, then it will display the
current channel number, colour
system, sound system and sound
mode. Press it again to cancel the
display.
12
Auto B/G
17
Picture adjustment
To select the picture mode
You can select the picture quality
instantly among three preset
modes and one user-set mode.
Picture mode Standard
Picture mode Dynamic
?
Press the P.M button to select the
desired picture quality. Standard,
Dynamic, Mild and Favourite (user-
set) can be selected cyclically.
i
Picture mode Mild
Picture mode Favourite
3
6
9
1
4
7
2
5
8
Picture quality
Display normal pictures
Mode
Standard
Dynamic
Mild
0
/AV
Display more brightness and contrast pictures
Display mild pictures
--/
---
MENU
CH+/-
(menu item
select)
The picture quality you set
Favourite
CH
VOL
VOL
-
+
VOL+/-
(volume adjust
menu item adjust)
CH
-
Picture adjustment
GAME
LOCK
OK
(exit the menu)
1
2
3
Press MENU to display
Picture menu.
P.M
S.M
Picture
P.M
(Picture mode select)
P+
Contrast
+
Brightness
Colour
Press CH+ or CH- to select
desired adjusting item.
-
+
Sharpness
Tint
-
SVM
On
P-
-
+
Press VOL+/- to adjust.
SOUND
+
Item
Contrast
Brightness
Colour
Sharpness
Tint*
VOL-
weaker
darker
paler
softer
purplish
VOL+
stronger
lighter
deeper
sharper
greenish
SVM
High/Mid/Low/Off
Notes:
Tint is only for NTSC system.
Turning on SVM will greatly improve picture's sharpness.
* SVM is an optional function.
* To exit the menu, press OK button.
18
Sound controls
Adjusting volume
Use VOL+ or VOL- button.
1
Press VOL+ button, the volume increases;
?
Volume
Press VOL- button, the volume decreases.
i
(Sound mute)
Use MUTE button.
If you want to mute the sound,
2
3
6
9
1
4
7
2
5
8
press
button on the remote.
Digit buttons
X
To resume the sound, press
this button again.
0/AV
--/
---
MENU
CH+/-
(menu item
select)
CH
VOL
VOL
Adjusting sound
-
+
VOL+/-
(volume adjust
menu item adjust)
CH
-
Press MENU repeatedly to display Sound menu.
1
2
GAME
LOCK
OK
Sound
(exit the menu)
Press CH+ or CH- to select
desired adjusting item.
P.M
S.M
P+
Volume
Bass
S.M
(Sound mode select)
Treble
+
Balance
Press VOL+/- to adjust the
level.
3
-
+
DBE
MSS
Off
Off
-
P-
-
+
SOUND
Item
Volume
Bass
VOL+
VOL-
weaker
weaker
+
stronger
stronger
stronger
weaker
Treble
decrease the
left channel
decrease the
right channel
Sound mode selection
Balance
You can select the sound quality instantly among
three preset modes and one user-set mode.
DBE (Dynamic
bass enhanced)
ON/OFF
ON/OFF
MSS (Micronas
surround sound)
Press the S.M button to select
Sound mode Movie
the desired sound quality. Movie,
Music, Speech and Favourite
Sound mode Music
The adjusted level is stored in the Favourite position.
(user-set) can be selected
Sound mode Speech
cyclically.
Note: DBE/MSS function are optional function.
Sound mode Favourite
Mode
Movie
Music
Speech
Favourite
Sound quality
like a movie theatre filled with a dynamic sound
like a music hall filled with a rich warm sound.
Suitable for listening to news/dialogue
the sound quality you set
19
Sound controls
The unit receives both stereo and bilingual broadcasts transmitted in either the NICAM or German
stereo/bilingual broadcast system.
Stereo programs
12
Auto B/G
Stereo
When a stereo program is
received, STEREO appears.
1
?
Enter into
earphone state
i
12
2
Auto B/G
Mono
Press the SOUND button to select
the stereo/monaural mode.
3
6
9
1
4
7
2
5
8
Bilingual programs
22
Auto B/G
Dual I
0
/AV
--/
1
2
When a bilingual program is
received, DUAL appears.
---
Menu
CH+/-
(menu item
select)
CH
VOL
VOL
+
-
VOL+/-
(volume adjust
menu item adjust)
Press SOUND button to select the sound to be heard,
Dual I and Dual II appear cyclically on the screen.
As for NICAM-dual program, Mono and Dual I and Dual II
appear cyclically on the screen.
CH
-
GAME
LOCK
OK
(exit the menu)
P.M
S.M
Notes:
+
-
+
As for FM Germany Dual program, press SOUND button,
the sound mode will switch between Dual I and Dual II.
SOUND
Monaural
Stereo
-
bilingual select
SOUND
To enter into earphone state
+
Press
button to enter into
earphone state, in this state, sound
is outputted through earphones and
speakers’ sound is muted. Press
the button again to restore.
Sound
In earphone state, the sound
P+
menu is shown on the right figure:
Volume
Bass
Treble
Balance
In the menu, use CH+/- to select
item, VOL+/- to adjust the level.
Or you can directly press VOL+/-
button to adjust earphone
volume.
P-
-
+
* To exit the menu, press OK button.
20
Timer setting
Setting clock
Press MENU button repeatedly to display Timer menu.
1
Timer
P+
2
3
Press CH+/- to select Clock.
?
Clock
10:01
Timer off
Timer on
Timer set
Prog no
--:--
--:--
--:--
3
i
Use digit buttons to input the
current time for the set. If
wrong in setting the time,
press RED button to cancel
and input again.
P-
x
-
+
3
6
9
1
4
7
2
5
8
Digit buttons
MENU
Notes:
Before setting the timer, please first set the CLOCK item.
Press the main power switch to turn off the set, the clock will
be cancelled. You need to reset it if you want to use the timer
function.
0
/AV
--/
---
CH+/-
(menu item
select)
CH
VOL
VOL
-
+
VOL+/-
(volume adjust
menu item adjust)
CH
-
To turn off TV automatically (OFF timer)
GAME
LOCK
OK
(exit the menu)
With the OFF timer, the TV will automatically switch to
standby mode at a preset time.
P.M
S.M
Cancel the inputting
+
Timer
In Timer menu, press CH-
to select Timer off.
1
-
+
P+
Clock
10:02
23:00
--:--
--:--
3
-
Timer off
Timer on
Timer set
Prog no
2
Use Digit Buttons to set the
OFF time. In wrong in
SOUND
P-
x
-
inputting, press RED button
to cancel and input again.
+
+
At the preset time, the TV will go into standby mode
automatically.
Once the OFF timer has been fulfilled, next when you
want to use it, you should reset it again.
* To exit the menu, press OK button.
21
Timer setting
To turn on the TV automatically (ON timer)
With the ON timer, the TV will automatically turn on to a
preset channel at a preset time.
(On/standby)
1
In Timer menu, press CH- to
select Timer on.
Timer
?
P+
2 Use Digit Buttons to set ON
time. If wrong in inputting,
press RED button to cancel
and input again.
Clock
10:02
i
Timer off
Timer on
Timer set
Prog no
12:00
14:05
--:--
5
P-
x
-
3
6
9
+
1
4
7
2
5
8
3 Press CH- to select Prg no.,
use VOL+/- to set the ON
program, or you can directly
input the number by digit
buttons.
Digit buttons
MENU
0
/AV
4 Press STANDBY (
) button to switch the TV to standby
--/
---
mode.
CH+/-
(menu item
select)
At the preset time, the TV will turn on to the preset
program automatically.
CH
VOL
VOL
-
+
VOL+/-
Once the ON timer has been fulfilled, next when you want
to use it again, you should reset it.
(volume adjust
menu item adjust)
CH
-
GAME
LOCK
OK
(exit the menu)
P.M
To switch the TV to a program at a preset time
S.M
Cancel the inputting
+
1 In Timer menu, press CH+/-
Timer
-
+
P+
to select Timer set.
Clock
10:05
-
Timer off
Timer on
Timer set
Prog no
23:00
--:--
2 Use Digit buttons to set the
time. If wrong in inputting,
press RED button to cancel
and input again.
18:00
2
SOUND
P-
x
-
+
+
Timer
3
Press CH- to select Prg no.,
use VOL+/- to set a program
number, or directly input the
number by digit buttons.
At the preset time, the TV will
automatically switch to the
preset program.
P+
Clock
10:06
23:00
--:--
18:00
14
Timer off
Timer on
Timer set
Prog no
P-
x
-
+
Note:
When you turn off the TV by main power switch, all
functions in Timer menu will be cancelled.
* To exit the menu, press OK button.
22
Special functions
To select OSD language
There are multi OSD languages in this TV set provided for
you to select (OSD: on-screen display):
Press MENU repeatedly to display Special functions
1
menu.
Special functions
P+
English
On
50
Language
Blue back
Rotate
?
2
Now the first menu item is
highlighted and indicates the
current selected OSD
language. (if in English it will
display ENGLISH).
i
Off
Auto
B/G
-
Child lock
Color system
Sound system
P-
+
3
6
9
1
4
7
2
5
8
3
Press VOL+/- to select a proper OSD language.
Setting blue back
1
2
Enter into Special functions menu
0
/AV
Special functions
--/
---
MENU
P+
English
On
50
Language
Blue back
Rotate
Press CH+/- to select Blue
back.
CH+/-
(menu item
select)
CH
Off
Auto
B/G
Child lock
Color system
Sound system
VOL
VOL
+
3
Press VOL+/- to turn on/off
-
VOL+/-
(volume adjust
menu item adjust)
P-
-
+
blue back.
CH
-
If the Blue back is turned on, the TV will appear a
blue back on the screen when there is no input signal.
GAME
LOCK
OK
(exit the menu)
P.M
S.M
Rotate function (option)*
+
When you switch on your TV there may be a slight tilt of the
picture to the left or right. This is due to the earth's magnetic
field or position of your TV. To rectify, you can do the
following:
-
+
-
SOUND
1
2
Enter into Special functions menu.
Special functions
+
P+
English
Language
Blue back
Rotate
Press CH+/- to select
Rotate.
On
30
Off
Auto
B/G
-
Child lock
Color system
Sound system
3
Press VOL+/- to rotate the
picture until you are satisfied.
P-
+
Note: Rotation function is an optional function.
It is only available in certain versions.
* To exit the menu, press OK button.
23
Child lock setting
* Child lock is an optional function.
Child lock setting
Making use of child lock function, you can lock all the
programs to prevent children from viewing them.
Press LOCK button on the
remote control, the Lock
menu bar appears.
1
Lock ------
Lock ------
?
Lock *****-
Lock *****-
i
(or press MENU repeatedly
to display Special functions
menu. Press CH+/- to select
Child lock item, then press
VOL+/- to enter.)
Lock
Off
Lock
On
New ------
New ------?
3
6
9
1
4
7
2
5
8
Digit buttons
MENU
2
3
Input the correct password. (6-digit, the preset password is
123456). After inputting, the screen displays "Lock: On".
0
/AV
CH+/-
(menu item
select)
--/
---
After one or more seconds the screen will display
"New______", now press OK button (or wait for some
time until "New ______" disappear) and the child lock
function is active now, the screen only displays blue back
with Lock menu bar.
CH
VOL+/-
(volume adjust
menu item adjust)
VOL
VOL
+
-
OK
CH
-
(exit the menu)
GAME
LOCK
4 To unlock, input the correct password to set the Child
Enter into
child lock setting
P.M
S.M
lock to OFF.
+
Note: the preset password can be changed, the steps are
-
+
shown below:
-
After you set the lock to On (or Off), the screen will display
"New ______", input the new password, and confirm
again. Now the password has been changed. But make
sure to remember the new password.
SOUND
+
In child lock OFF mode, if you press LOCK button
unintentionally, you can press OK button to exit.
In child lock ON mode, buttons on the TV set can not act.
Also most buttons on the remote control can not act.
To avoid forgetting the password, write it down here:
------
24
Hotel lock setting
* Hotel lock is an optional function.
Hotel lock setting
Making use of hotel lock function, you can limit some
functions so that other user can not change your settings.
This function is especially useful in hotel.
1
2
Press
button on the
+
Hotel ------
?
remote control, the screen
will display "Hotel ------".
i
Hotel *****-
Input the 6-digit password
(the preset password is
123465), the screen will
display "Hotel Off (or On)".
Hotel
Off
3
6
9
1
4
7
2
5
8
Digit buttons
Hotel
On
3 Press VOL+/- to select ON.
Now Hotel Lock function is active now. Only some buttons
(for example, channel select buttons, volume control
buttons, AV button, etc.) can act and the volume is limited.
In Hotel ON mode, the maximum volume level is the level
you set just before you enter the Hotel ON mode. If you
want to change the volume limitation, set the Hotel to OFF
and then adjust the volume, then enter into ON mode
again.
0
/AV
--/
MENU button
Clear the OSD
---
CH
VOL
VOL
+
-
VOL+/- buttons
CH
-
To exit the hotel lock, set Hotel to OFF.
GAME
LOCK
P.M
S.M
To clear the On-screen display, you can press OK button.
+
-
+
Enter into
hotel lock setting
-
To change Hotel Lock password
SOUND
The preset password for hotel lock can be changed, the
steps are shown below:
+
Hotel ------
1
After setting Hotel to OFF mode, press
MENU button, the screen displays
"New ------"
Hotel *****-
Hotel
Off
Input the new Password and confirm
again.
Now the password has been changed.
2
New ------
New ------?
To avoid forgetting the password, write it down here:
------
25
Game playing
To play game (card game)
1
Press GAME button to enter.
2 Press MENU button to select level.
There are five levels for you to select. The higher the
level, the more difficulty the playing.
?
i
Press CH+/CH-/VOL+/VOL- button to select card, press
3
OK button the card will be turned over. If the second card
you turned over is different with the first card, it will cover
again unless the same two cards are selected. Only you
turn over all the cards, you win the game.
3
6
9
1
4
7
2
5
8
4
Press GAME button to exit.
0/AV
The best record
--/
---
The level
you select
Game
CH
Game
control buttons
Best:190
Time:120
VOL
VOL
+
-
The time you play
CH
-
P
GAME
LOCK
Enter/exit
game playing
P.M
S.M
The card you turn over
+
-
+
-
SOUND
+
* To exit the menu, press OK button.
26
Teletext
Teletext is an optional function, therefore only a set with the teletext system can receive the teletext broadcast.
Switching Teletext on/off
Press
Press
Press
button once to switch on teletext.
button twice both teletext and TV program are displayed.
button third time to switch off the teletext.
(Real clock)
(Hold)
(Size)
?
(Reveal/
Conceal)
Description of Teletext
?
Teletext is a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather,
television programs, share prices and many other topics.
The thing to remember about Teletext is that it is slow. It is the
nature of the system itself, where a large amount of information
is sent using a small fraction of the TV signal. If you get yourself
into trouble, read the following instruction carefully. It may have
your answer.
i
(Mix/Text)
i
(Index)
3
6
9
1
4
7
2
5
8
(Text/TV
select)
Teletext is controlled through the remote controller.
Button introduction
1
(TEXT)
0/AV
Direct page
select
--/
---
Press
button to bring the set from TV mode to Teletext mode.
Press it at the third time to resume TV mode.
CH
2.
(MIX)
VOL
VOL
+
Press the button, the text will be superimposed on a TV picture.
Press again to restore text.
Coloured
-
text select
buttons
RED
Text page
up/down
CH
-
i
3.
(INDEX)
GREEN
YELLOW
CYAN
GAME
LOCK
In teletext mode press the button, the index page will appear.
?
4.
(REVEAL)
P.M
S.M
Some pages have sections that are concealed such as the
answers to riddles or puzzles. To see the concealed part, press
the button. Press it again to conceal.
+
Teletext
contrast control
-
+
Teletext
brightness control
5.
(HOLD)
-
To hold the current teletext page, press the button. To release
the page press the button again.
SOUND
6.
(SIZE)
+
Press the button to expand the top half of the display. Press it
again to expand the bottom half of the display. Press it once
more to resume normal size.
7.
(REAL CLOCK)
Press the button to display the real time on the screen while
viewing TV program which carries a teletext broadcasting.
Press again to turn off the time display.
8. RED/GREEN/YELLOW/CYAN buttons
(corresponds to GAMES/S.M/P.M/LOCK button)
These four colour-coded buttons control a memory that allows
instant access to the displayed corresponding page number.
+/-
9.
buttons
Press the buttons to adjust Teletext brightness.
10.
buttons
+/-
Press the buttons to adjust Teletext contrast.
27
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Power is not turned on
Poor colour poor tint
Contrast, colour tint are not correctly adjusted
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
The set may be in child lock ON mode. Use LOCK
button and password to unlock it. If you forget the
password, you can contact our company or the
dealer.
The screen only displays
blue back. Buttons on the
TV set can not act.
Only some buttons have
function while others can
not act, and the volume is
limited.
The set may be in hotel lock ON mode. Set hotel
lock to OFF. If you forget the password, you can
contact our company or the dealer.
Even if the picture or the sound is normal, changes
in the room temperature sometimes make the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
TV cabinet creaks
Remote controller does
not work
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 30 minutes before
switching on again.
Unevenness in colour in
some parts of the screen
28
Troubleshooting Guide
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.
Outdoor antennas are recommended for best results if not using cable. The most common types of
television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local cable company broadcast.
IGNITION:
Black spots or horizontal streaks may appear, picture, may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electric drills and other electric appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or other
objects. Changing the direction or position of the antenna may improve the
reception.
SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small dots.
When the signal is extremely weak, it maybe necessary to install an
external antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
This interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:
A slight picture size variation is quite normal when you adjust the
CONTRAST or BRIGHTNESS setting.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the
receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping
the plastic parts. Mild soap and a soft, damp cloth may be used.
29
Specifications
Power Supply:
Power Consumption:
Dimensions (mm):
Weight (kg):
AC 240V, 50Hz
200W
968 (W) x 564 (H) x 570 (D)
66
CRT:
76cm
TV system & channel range
CATV
VHF
2-12
UHF
System
X~Z+2, S1~S41
21-69
PAL-B/G
TELETEXT
WST TELETEXT
Colour System:
PAL-BG, NTSC(AV)
Stereo/bilingual system: NICAM-BG, IGR-BG
Sound output: 7W X 2
Note: Design and specifications are subject to change without notice.
30
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-TA3263-00
|