OWNER'S MANUAL
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 6830GY
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
Introduction
Main features
Features
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hyperband
256 preset channels
Automatic channel preset
2
Intellectualized I C-bus control
English/Chinese on-screen display
Full function remote control
AV input & output terminals
Clock/Game/Calendar
Four picture modes
Four sound modes
ON timer/OFF timer
Surround sound
Channel scan
Channel edit
1
Introduction
Important Safety Precautions
Safety Precautions
When any unusual situation occurs, turn off the
power supply at once and remove the plug from the
wall outlet. Contact a qualified service department in
your local area.
Do not expose the TV set to rain or excessive
moisture. Avoid using the set in very warm or
damp places and never use it in a bathroom.
When cleaning dust off the picture tube disconnect
the power first. You can wipe lightly with a piece of
dry, clean and soft cloth.
Avoid exposing the set to direct sunlight and other
sources of heat to prevent damage to the cabinet
and components.
High voltage exists in this TV set. Do not remove the
cover.
2
Do not cover the ventilating hole in the cabinet
Keep a space of more than 10cm from the walls to the
TV set to ensure adequate ventilation.
If the power cord or the plug is damaged contact a
qualified service department for service.
When the TV set is to be left unattended for a long
period of time, turn off the power supply and remove
the plug from the wall outlet.
Don't try to push anything into the cabinet or place
any vessel with water on the TV set.
Introduction
Identification of Controls
Front/Back view
Front
Indicator
Indicator
Power Switch
MENU AV/TV CH-
CH+
VOL- VOL+
Remote Sensor
Back
R
L
VIDEO
AV 3 input
(VIDEO, AUDIO:
L/MONO, R)
(3)
DVD input
(VIDEO: Y,CB, CR,
AUDIO: L/MONO, R)
AV2 input (VIDEO
AUDIO: L/MONO, R)
Antenna input
(1)
(2) DVD
AV1 inputs (S-VIDEO,
VIDEO, AUDIO: L/MONO, R)
S-VIDEO
MONITOR
AV output
(VIDEO, AUDIO: L,R)
VIDEO
VIDEO
Y
L/MONO
L/MONO
CB
CR
L
AUDIO
R
AUDIO
R
AUDIO
R
4
NOTES:
NOTES:
5m
1
4
7
3
6
9
2
5
8
0
CH
VOL
VOL
CH
SLEEP
PIC
EDIT
SOUND
GAME
SYSTEM
NOTES:
Introduction
External Equipment Connection
(Please refer to the owner's manual of the equipment to be connected as well.
External Equipment Connection
To connect AV input terminals
You can connect video equipment such as a VTR and video camera to this TV and enjoy the high
quality picture and sound.
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal
(special (S-VIDEO type) of the unit. If not, connect it to the VIDEO terminal (RCA).
The S-VIDEO and AV1 use the same group of audio input terminals, and the S-VIDEO input terminal
has priority over the AV1 VIDEO terminal. To use equipment connected to the VIDEO terminal,
disconnect any plug from the S-VIDEO terminal.
To audio outputs
R
R
R
AUDIO
L/MONO
w
Y
w
Y
TV SET SIDE
VIDEO
To video output
Video camera, etc.
(3)
Y
W
R
VTR without
S-VIDEO terminal
:Yellow (video)
:White (audio L/MONO)
:Red (audio R)
VTR with
S-VIDEO terminal
VHS
VHS
To S-VIDEO
output terminal
R
w
To video
output
To audio
outputs
W
R
Y
TV SET'S REAR
To audio
outputs
(1)
S-VIDEO
(2) DVD
MONITOR
VIDEO
VIDEO
Y
L/MONO
L/MONO
Y
CB
CR
L
w
R
w
AUDIO
R
AUDIO
R
AUDIO
R
R
R
w
Y
To video output
VTR, DVD etc.
Y
w
R
To audio outputs
8
NOTES:
1. Both the C terminal and the audio R terminal are red for easy identification. Make sure
R
they are correctly connected.
2. DVD and AV2 use the same group of audio terminals.
3. DVD has a priority over AV2. If you use DVD input, disconnect VIDEO2.
To connect AV output terminals
TV SET'S REAR
w
R
(1)
(2) DVD
S-VIDEO
MONITOR
VIDEO
VIDEO
Y
L/MONO
L/MONO
w
R
CB
CR
L
AUDIO
R
AUDIO
R
AUDIO
R
Y
VHS
R
w
R
W
w
R
Y
Y
NOTES:
The TV set can turn off automatically by:
A. Sleep timer function (needs to be set in advance).
B. OFF timer function (needs to be set in advance).
Operations
Select input signal
Select input signal
Watching AV program
This TV set provides AV input terminals for your convenient
connection to VCR, DVD or other video equipment.
To watch video program from AV inputs, Press
1 AV button repeatedly until you see the
3
6
9
1
4
7
appropriate input indicator on the screen.
2
5
8
0
VIDEO 2
VIDEO 3
VIDEO 1
10
Notes:
CH
VOL
VOL
When S-VIDEO terminal is used, the OSD (on-screen
display) is S-VIDEO1 instead of VIDEO1.
CH
When DVD is used, the OSD is DVD instead of VIDEO 2.
SLEEP
PIC
EDIT
SOUND
Switching from AV to TV
When the TV set is in AV mode, there are three ways for
you to switch back to TV mode as follows.
GAME
Press AV button repeatedly until the TV program
SYSTEM
1 appears.
Press digit buttons to switch to a desired TV
program.
2
Press CH+/- button to switch to TV mode.
3
11
Operations
Tuning in
Auto search/Manual search/To skip unwanted channel
If you have preset the channels, you can directly watch TV
programs after turning on the set. If not, then preset channels in
one of the following ways.
Auto search
PICTURE SOUND TIMER TUNING SETUP
Enter into TUNING menu.
1
2
3
6
9
1
4
7
2
5
8
0
Press CH+/- to select AUTO
MEMORY.
SELECT
CONFIRM
Press VOL+ to start Auto
Search. All active channels
will be preset and stored into
the memory automatically.
After auto search, the TV will
go to the first channel.
PICTURE SOUND TIMER TUNING SETUP
POSITION
BAND
3
8
VHFL
ON
SKIP
CH
SEARCH
MFT
AUTO MEMORY
VOL
VOL
CH
SELECT
ADJUST
During the process of Auto
search, pressing VOL- will
stop the process and the TV
will return to the first channel.
SLEEP
PIC
EDIT
SOUND
VHFL
6
ASM
STOP
Manual search
GAME
If auto search can not preset the desired channels, or you want
to preset the desired channels one by one with the preferred
channel numbers, please make use of Manual Search.
SYSTEM
1Enter into TUNING menu.
PICTURE SOUND TIMER TUNING SETUP
POSITION
BAND
SKIP
8
VHFL
ON
Press CH+/- to select
2
SEARCH
MFT
AUTO MEMORY
POSITION item.
SELECT
ADJUST
Press VOL+/- to select a
3 number (from 0~255). (You
can press and hold the button
to increase or decrease the
value by 10).
4 Press CH- to select SEARCH item.
12
Press MENU button.
1
PICTURE SOUND TIMER TUNING SETUP
2Press VOL+/- to select TUNING icon.
3
SELECT
CONFIRM
Press CH- to enter into TUNING menu.
Press VOL+ to search
5towards higher frequency,
PICTURE SOUND TIMER TUNING SETUP
the screen displays glittering
" " press VOL- to search
toward lower frequency, the
screen displays glittering " ".
When a channel is located,
the searching stops and the
channel is stored in the
POSITION
BAND
SKIP
8
VHFL
ON
SEARCH
MFT
AUTO MEMORY
SELECT
ADJUST
3
6
9
1
4
7
2
5
8
0
specified channel number.
When searching towards
higher frequency, pressing VOL-
will stop the search and return to
first program. When searching
towards lower frequency,
pressing VOL+ will stop the
search and return to first
program.
VHFH
8
SEARCH
STOP
CH
VOL
VOL
CH
SLEEP
PIC
You can also use BAND selection to quicken searching
EDIT
SOUND
process if you know which band your desired program locates in.
The band switched among UHF, VHFL, VHFH.
Repeat the above steps if you want to store another program
in other position number.
GAME
To skip an unnecessary channel
SYSTEM
After presetting the channels, you may skip unnecessary
channels so that only the channels you want to watch are
selected with CH+/- button.
From TUNING menu select an unwanted channel
1 number (for example, channel 10).
Press CH+/- to select SKIP
2item.
PICTURE SOUND TIMER TUNING SETUP
POSITION
BAND
SKIP
8
VHFL
ON
Press VOL+/- to set ON.
SEARCH
MFT
AUTO MEMORY
3Now channel 10 will be skipped
when you browse channels
by CH+ or CH- button.
SELECT
ADJUST
To restore a skipped channel, please select the channel
number from Tuning menu, repeat the above steps to set SKIP
item to OFF.
13
Operations
Tuning in
(continued)
Fine tuning/The setting of colour and sound system
Fine tuning
Fine tuning is not necessary under normal conditions.
However, in area of inferior broadcast conditions where
adjustment is necessary for a better picture and sound,
use Fine Tuning.
3
6
9
1
4
7
1 Enter into TUNING menu.
2
5
8
0
PICTURE SOUND TIMER TUNING SETUP
POSITION
BAND
SKIP
8
VHFL
ON
2Press CH+/- to select MFT.
SEARCH
MFT
AUTO MEMORY
Press VOL+ or VOL- to fine
3
SELECT
ADJUST
tune until the best possible
picture and sound are
CH
obtained.
VOL
VOL
Note: if some channel's colour or sound is abnormal, it may be
that the setting of colour or sound system is wrong, please
do the following adjustment to set the proper colour and
sound system.
CH
SLEEP
PIC
EDIT
SOUND
The setting of colour and sound system
In factory the TV set's colour system has been preset to
AUTO. If you want to change the system, please do the
following steps:
GAME
Press SYSTEM button to display the colour and sound
system menu.
SYSTEM
If the picture's colour is
abnormal, enter into the
SYSTEM menu, press CH+/-
to select COLOR, press
VOL+/- to select a proper
colour system.
1
COLOR
AUTO
I
SOUND
SELECT
ADJUST
If the sound is abnormal.
enter into the SYSTEM menu,
press CH+/- to select
SOUND, press VOL+/- to
select a proper sound
system.
2
COLOR
SOUND
AUTO
I
SELECT
ADJUST
In some model there is only
one sound system and in this
case the sound system does
not need to be adjusted.
14
Operations
Channel selection
Making use of direct select buttons
Use direct selection buttons
To select one-digit channel
1
--
Method 1: press 0-9 button
and wait for 2 seconds.
X
after 2 seconds
X
3
6
9
1
4
7
2
5
8
0
Method 2: press 0 button twice, and then press the channel
number. Be sure the period of two-press should be within 2
seconds.
Method 3: press 0 button, then input the number and wait
for 2 seconds. Be sure the period of two-press should be
within 2 seconds.
CH
VOL
VOL
2To select two-digit channel
CH
Method 1: Input the channel
number using the digit
buttons and wait for 2
seconds. Be sure the period
of two-press should be within
2 seconds.
SLEEP
PIC
--
X
EDIT
SOUND
-
X X
after 2 seconds
X X
GAME
SYSTEM
Method 2: press 0 button, and then input the channel
number. Be sure the period of two-press should be within 2
seconds.
--
X
3 To select three digit channel
Just input the channel
-
number. Be sure the period of
two-press should be within 2
seconds.
X X
X X X
Note: the maximum channel number is 255.
15
Operations
Channel selection
(continued)
Making use of channel up/down buttons/Previous channel button/Channel scan/channel edit
Use Channel up/down buttons
1Press CH+ button, the channel number increases.
2Press CH- button, the channel number decreases.
3
6
9
1
4
7
Use Previous channel button
2
5
8
0
Press
button to switch between the current channel and the
previous channel.
For example, the channel you previously watched is 11, the
current channel is 2, press the button, it will return to channel 11,
press the button again it will return to channel 2.
3
CH
VOL
VOL
Channel scan
Press SCAN button, the set will
CH
scan the channel from the
2
SLEEP
PIC
current channel to higher
channels one by one until all the
programs are scanned over and
then stop. During scanning,
pressing any button will stop it
and the screen will settle at the
current scanned program.
EDIT
SOUND
CHANNEL SCANNING
GAME
Channel edit
SYSTEM
Press EDIT button to display
CHANNEL EXCHANGE
menu.
1
Press CH+/- to select
CHANNEL 1, use VOL+/- to
set the number which you
want to swap, for example,
channel 6.
CHANNEL EXCHANGE
2
CHANNEL 1
CHANNEL 2
EXCHANGE
6
10
SELECT
ADJUST
Press CH+/- to select
You can press DSP button
twice to display the current
time of the TV set, press
again to cancel.
3 CHANNEL 2, use VOL+/- to
set the number which you
want to swap to, for example,
channel 10.
Press CH- to select EXCHANGE, press VOL+ or VOL- and
4the channel 6 and 10 are swapped.
Repeat the above steps to edit the programs in your favourite
order.
16
Operations
Picture adjustment
Picture adjustment
To select the picture mode
You can select the picture quality instantly among three
modes and one user-set mode.
Press the PIC button to select the desired picture quality.
BRILLIANT, STANDARD, SOFTNESS and PERSONAL
(user-set) can be selected cyclically.
3
6
9
1
4
7
2
5
8
0
BRILLIANT
STANDARD
SOFTNESS
PERSONAL
Picture quality
Mode
Display more brightness and contrast pictures
Display normal pictures
BRILLIANT
STANDARD
SOFTNESS
PERSONAL
CH
VOL
VOL
Display mild pictures
The picture quality you set
CH
SLEEP
PIC
EDIT
SOUND
Adjusting picture
PICTURE SOUND TIMER TUNING SETUP
1 Press MENU button.
SELECT
CONFIRM
Press VOL+ or VOL- button to
GAME
2
select PICTURE icon.
SYSTEM
PICTURE SOUND TIMER TUNING SETUP
CONTRAST
BRIGHT
COLOR
SHARP
NOISE REDU.
40
50
50
50
OFF
Press CH- to enter into the
PICTURE menu.
3
In PICTURE menu, press CH+/-
4
SELECT
ADJUST
to select the desired item, press
VOL+/- to adjust.
CONTRAST
50
Item
Contrast
Brightness
Colour
VOL-
weaker
darker
paler
VOL+
stronger
lighter
deeper
greenish
sharper
Tint
purplish
softer
Sharpness
Noise reducer
ON/OFF
Notes:
Tint is only for NTSC system.
The adjusted level is stored in the PERSONAL position.
17
Operations
Sound adjustment
Sound adjustment
Adjusting volume
Use VOL+ or VOL- button.
Press VOL+ button, the volume
increases;
1
Press VOL- button, the volume
decreases.
VOLUME
50
3
6
9
1
4
7
2
5
8
0
2Use
(MUTE) button.
If you want to mute the sound,
press button on the remote
control.
To restore the sound, press
this button again.
CH
VOL
VOL
Notes:
CH
You can also restore the sound by pressing VOL+ or VOL-
SLEEP
PIC
button.
EDIT
SOUND
GAME
SYSTEM
18
Adjusting sound
PICTURE SOUND TIMER
TUNING SET UP
BASS
TREBLE
BALANCE
S.WOOFER
S.WOOFER
SURROUND
+20
+30
±00
OFF
50
Press MENU button.
1
Press VOL+ or VOL- button
to select SOUND icon.
Press CH- to enter into
SOUND menu.
OFF
2
SELECT
ADJUST
3
6
9
1
4
7
2
5
8
0
BASS
+16
In SOUND menu press
CH+/- to select desired item,
press VOL+/- to adjust.
3
Item
BASS
VOL-
VOL+
CH
Weaker
Weaker
Stronger
Stronger
VOL
VOL
TREBLE
Decrease the
right channel
Decrease the
left channel
CH
BALANCE
SLEEP
PIC
S.WOOFER
S.WOOFER
SURROUND
ON/OFF
EDIT
SOUND
Stronger
Weaker
OFF/HARD/SOFT/STEREO
Note: if in the TV (RF) mode, Surround sound can be switched
between OFF and Stereo. In VIDEO or DVD mode, Surround
sound can be switched between OFF/SOFT/HARD.
GAME
SYSTEM
Sound mode selection
You can select the sound quality instantly among three preset
modes and one user-set mode.
Press the SOUND button to select the desired sound quality.
THEATRE, NEWS, MUSIC and PERSONAL (user-set) can be
selected cyclically.
THEATRE
NEWS
MUSIC
PERSONAL
Mode
Sound quality
THEATRE Like a movie theatre filled with a dynamic sound.
NEWS
MUSIC
Suitable for listening to news/dialogue.
Like a music hall filled with a rich warm sound.
PERSONAL The sound quality you set.
19
Operations
System setup
System setup
Selecting OSD language
1Press MENU button.
PICTURE SOUND TIMER TUNING SETUP
Press VOL+ or VOL- to
2
select SETUP icon.
3
6
9
1
4
7
2
5
8
0
SELECT
CONFIRM
Press CH- to enter into
SETUP menu.
3
Press CH+/- to select
LANGUAGE.
4
PICTURE SOUND TIMER TUNING SETUP
LANGUAGE
DEMO
ENG/
STOP
OFF
CH
B.B.
CALENDAR
VOL
VOL
Press VOL+/- to select
English or Chinese (
5
CH
)
SELECT
ADJUST
SLEEP
PIC
EDIT
SOUND
Menu demonstration
GAME
SYSTEM
1Enter into SETUP menu.
2Press CH+/- to select DEMO.
PICTURE SOUND TIMER TUNING SETUP
LANGUAGE
DEMO
B.B.
ENG/
START
OFF
CALENDAR
Press VOL+ or VOL- to select
START and the TV starts the
menu demonstration, which
shows you how to use the
menu.
3
SELECT
ADJUST
After the demonstration, it will return to SETUP menu and the
DEMO item is auto set to STOP. After 4 seconds it exits the
menu automatically.
20
Setting Blue Background option
Enter into SETUP menu.
1
2
3
PICTURE SOUND TIMER TUNING SETUP
LANGUAGE
DEMO
B.B.
ENG/
STOP
ON
Press CH+/- to select B.B.
CALENDAR
Press VOL+/- to select On or
Off.
3
6
9
1
4
7
2
5
8
0
SELECT
ADJUST
If the B.B is set to On, the TV set will display a blue
background when there is no input signal.
If the B.B is set to Off, the TV will display snowy picture when
there is no input signal.
CH
VOL
VOL
Calendar
PICTURE SOUND TIMER TUNING SETUP
CH
SOLAR
LUNAR
SLEEP
PIC
1Enter into SETUP menu.
EDIT
SOUND
SELECT
ADJUST
Press CH+/- to select
2
3
CALENDAR item.
GAME
PICTURE SOUND TIMER TUNING SETUP
LANGUAGE
DEMO
B.B.
ENG/
STOP
OFF
Press VOL+/- to enter into
calendar sub-menu. Press
CH+/- to select SOLAR or
LUNAR, press VOL+/- to enter.
SYSTEM
CALENDAR
SELECT
ADJUST
OCT 2008
SU MO TU WE TH FR SA
After entering into SOLAR
or LUNAR calendar, press
CH+/- to select year and press
VOL+/- to select month.
4
2
9
16
23
30
4
3
1
8
11
18
26
10
17
25
31
7
5
6
14 15
21 22
28 29
12 13
19 20
26 27
YEAR
MONTH
21
Operations
Timer setting
Clock/ON timer/OFF timer/Sleep timer
Setting clock
1Enter into TIMER menu.
2Press CH- to select CLOCK.
PICTURE SOUND TIMER TUNING SETUP
OFF TIMER
OFF
0 : 00
OFF
ON TIMER
0 : 00
8
POS
CLOCK
12:16:28
3
6
9
1
4
7
2
5
8
0
Press VOL+ or VOL- to set
the current time for the set.
SELECT
ADJUST
3
Note: Before setting the ON timer or OFF timer, please first
set the clock.
Setting ON timer
CH
With the ON timer, the TV will automatically turn on to a preset
channel at a preset time.
VOL
VOL
CH
In TIMER menu, press CH+/-
to select ON TIMER.
1
SLEEP
PIC
PICTURE SOUND TIMER TUNING SETUP
EDIT
SOUND
OFF TIMER
OFF
0 : 00
EVERY
0 : 00
Press VOL+ or VOL- to
select ONCE or EVERY.
If you set On Timer to Once,
this function occurs once. If
you set On Timer to Every,
this occurs every day. To
cancel this function, set On
Timer to Off.
ON TIMER
2
POS
CLOCK
8
12 : 16 : 28
SELECT
ADJUST
GAME
SYSTEM
PICTURE SOUND TIMER TUNING SETUP
OFF TIMER
OFF
0 : 00
EVERY
18 : 30
8
Press CH- button, use
VOL+/- to set the ON time.
ON TIMER
3
4
POS
CLOCK
12 : 16 : 28
Press CH- button to select
POS item, use VOL+/- to
select a channel number.
SELECT
ADJUST
If the set is in standby mode,
it will auto turn on and
broadcast the preset
channel at the preset time. If
in normal working mode, the
set will auto switch to the
preset channel at the preset
time.
PICTURE SOUND TIMER TUNING SETUP
OFF TIMER
OFF
0 : 00
You can press DSP button
twice to display the current
time of the TV set, press
again to cancel.
ON TIMER
EVERY
0 : 00
POS
18
CLOCK
12 : 16 : 28
SELECT
ADJUST
Note: You must set ON TIMER to ONCE or EVERY prior to
setting the time.
22
Press MENU button.
1
PICTURE SOUND TIMER TUNING SETUP
2Press VOL+/- to select TIMER icon.
3
SELECT
CONFIRM
Press CH- to enter into TIMER menu.
Setting OFF timer
With the OFF timer. the TV will automatically switch to standby
mode at a preset time.
PICTURE SOUND TIMER TUNING SETUP
In TIMER menu, press CH+/-
to select OFF TIMER.
OFF TIMER
EVERY
0 : 00
1
2
ON TIMER
EVERY
0 : 00
3
6
9
1
4
7
2
5
8
0
POS
CLOCK
18
12 : 16 : 28
Press VOL+ or VOL- to select
ONCE or EVERY.
SELECT
ADJUST
If you set Off Timer to Once.
this occurs only once; If you
set Off Timer to Every, this
occurs every day. TO cancel
this function, set Off Timer to
Off.
PICTURE SOUND TIMER TUNING SETUP
OFF TIMER
EVERY
23 : 16
EVERY
0 : 00
CH
ON TIMER
VOL
VOL
POS
CLOCK
18
12 : 16 : 28
CH
Press CH- button.
SELECT
ADJUST
SLEEP
PIC
3
EDIT
SOUND
Press VOL+ or VOL- to set the OFF time. The TV will turn
4off at the designated time.
Note: to enable the OFF timer, you must first set Off Timer to
Once or Every. When you are setting the time by VOL+/-
button, if you press and hold, the time will increase or
decrease by 10 minutes.
GAME
SYSTEM
Setting Sleep timer
You can quickly set the
sleep timer by using SLEEP
button on the remote control.
With every press of this button
SLEEP: 60 MIN.
the sleep time changes in the
sequence of OFF, 120
MIN., 110MIN., ---- 10MIN.
For example, you would like the TV to turn off in 60 minutes,
you can press the SLEEP button repeatedly until the screen
displays 60 MIN.
To cancel the sleep timer, you can press the SLEEP button
repeatedly until OFF is displayed on the screen.
23
Operations
Playing games
Playing games
There are two built-in games for you to play: one is Falling cube,
the other is Submarine.
Making use of Falling cube
SCORE
0 RECORD: 100
Press GAME button once to enter
into Falling cube game interface.
1
3
6
9
1
4
7
Press any one of / / /
buttons to start the game.
LEVEL
1
2
5
8
0
2
On the screen, there are falling cubes. Pressing button can change
the cubes' shape; Pressing or buttons can move the cubes
leftward or rightward while pressing button can hasten the cubes'
falling speed.
CH
When at the screen's left playing area one row has been filled with the
cubes, the row will disappear, and your score will gain one point. If two
rows disappear at the same time, your score will gain three points. If
three rows disappear at the same time, your score will gain seven
points.
VOL
VOL
CH
SLEEP
PIC
The right window provides hints about next cubes' shape, you can
arrange current cubes' position and angle in advance.
EDIT
SOUND
When the cubes reach to top, the screen will display GAMEOVER,
and the game is over.
GAME
3 Press GAME button to exit.
Making use of Submarine
Press GAME button twice to
SYSTEM
1
enter into Submarine game
interface.
SCORE :
000
2 Press any one of / / / buttons to start the game.
On the screen there are torpedoes falling occasionally. You can control
the yellow Submarine by / /
/
, buttons. Pressing , , or
buttons can move the yellow Submarine upward, downward, leftward
or rightward. Press Channel down (CH-) button to shoot cannonball.
Every time you hit a torpedo or opponent submarine, you gain 100
points.
If the yellow submarine is hit by torpedo or opponent submarine, the
game is over (GAMEOVER).
To restart the game, press CH+ button.
3
4Press GAME button to exit.
24
Other
Troubleshooting Guide
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble
you are experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly adjusted
Power is not turned on
Poor colour, poor tint
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
Even if the picture or the sound is normal, changes
in room temperature sometimes makes the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
TV cabinet creaks
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
Remote controller does
not work
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 10 minutes before
switching on again.
Unevenness in colour in
some parts of the screen
Check whether the Child Lock is set to On.
The screen is black
25
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
604-W29333-00
|