Omron Photomicrosensor Transmissive EE SX1107 User Manual

Photomicrosensor (Transmissive)  
EE-SX1107  
Dimensions  
Features  
Ultra-compact with a 3.4-mm-wide sensor and a 1-mm-wide slot.  
PCB surface mounting type.  
Note: All units are in millimeters unless otherwise indicated.  
High resolution with a 0.15-mm-wide aperture.  
RoHS Compliant.  
Absolute Maximum Ratings (Ta = 25° C)  
Item  
Forward current  
Symbol  
IF  
Rated value  
25 mA (see note 1)  
100 mA (see note 2)  
5 V  
Emitter  
Pulse forward current IFP  
Reverse voltage  
VR  
Detector  
Collector–Emitter  
voltage  
VCEO  
20 V  
Optical  
axis  
Emitter–Collector  
voltage  
Collector current  
VECO  
IC  
5 V  
20 mA  
Cross section AA  
Collector dissipation PC  
75 mW (see note 1)  
Recommended Soldering  
Pattern  
Internal Circuit  
Ambient  
temperature  
Operating  
Topr  
–30°C to 85° C  
–40°C to 90° C  
240°C (see note 3)  
300°C (see note 3)  
Storage  
Reflow soldering  
Manual soldering  
Tstg  
Tsol  
Tsol  
Note: 1. Refer to the temperature rating chart if the ambient temper-  
Terminal No.  
Name  
ature exceeds 25°C.  
A
K
C
E
Anode  
2. Duty: 1/100; Pulse width: 0.1 ms  
Unless otherwise specified, the  
tolerances are 0.15 mm.  
3. Complete soldering within 10 seconds for reflow soldering  
Cathode  
Collector  
Emitter  
and within 3 seconds for manual soldering.  
Ordering Information  
Description  
Model  
EE-SX1107  
Photomicrosensor (transmissive)  
Electrical and Optical Characteristics (Ta = 25°C)  
Item  
Symbol  
Value  
1.1 V typ., 1.3 V max.  
10 µA max.  
Condition  
Emitter  
Forward voltage  
VF  
IR  
IF = 5 mA  
VR = 5 V  
Reverse current  
Peak emission wavelength  
λP  
IL  
940 nm typ.  
IF = 20 mA  
Detector  
Light current  
50 µA min., 150 µA typ.,  
500 µA max.  
IF = 5 mA, VCE = 5 V  
Dark current  
ID  
100 nA max.  
VCE = 10 V, 0 lx  
Leakage current  
ILEAK  
---  
---  
Collector–Emitter saturated voltage  
Peak spectral sensitivity wavelength  
VCE (sat)  
0.1 V typ., 0.4 V max.  
900 nm typ.  
10 µs typ.  
IF = 20 mA, IL = 50 µA  
λP  
---  
Rising time  
Falling time  
tr  
VCC = 5 V, RL = 1 k,  
IL = 100 µA  
tf  
10 µs typ.  
VCC = 5 V, RL = 1 k,  
IL = 100 µA  
Photomicrosensor (Transmissive) EE-SX1107  
1
Unit: mm (inch)  
Tape and Reel  
Reel  
21 0.8 dia.  
330 2 dia.  
2 0.5  
13  
0.5 dia.  
80 1 dia.  
Product name  
Quantity  
Lot number  
12.4+02  
18.4 max.  
Tape  
1.5 dia.  
Tape configuration  
Terminating part  
(40 mm min.)  
Leading part  
(400 mm min.)  
Parts mounted  
Empty  
(40 mm min.)  
Pull-out direction  
Tape quantity  
2,500 pcs./reel  
Photomicrosensor (Transmissive) EE-SX1107  
3
Precautions  
Soldering Information  
Reflow soldering  
The following soldering paste is recommended:  
Melting temperature: 216 to 220°C  
Composition: Sn 3.5 Ag 0.75 Cu  
The recommended thickness of the metal mask for screen printing is between 0.2 and 0.25 mm.  
Set the reflow oven so that the temperature profile shown in the following chart is obtained for the upper surface of the product being soldered.  
260°C max.  
255°C max.  
1 to 5°C/s  
230°C max.  
150 to 180°C  
1 to 5°C/s  
10 sec max.  
40 sec max.  
120 sec  
Time  
Manual soldering  
Use “Sn 60” (60% tin and 40% lead) or solder with silver content.  
Use a soldering iron of less than 25 W, and keep the temperature of the iron tip at 350°C or below.  
Solder each point for a maximum of three seconds.  
After soldering, allow the product to return to room temperature before handling it.  
Storage  
To protect the product from the effects of humidity until the package is opened, dry-box storage is recommended. If this is not possible, store the  
product under the following conditions:  
Temperature: 10 to 30° C  
Humidity: 60% max.  
The product is packed in a humidity-proof envelope. Reflow soldering must be done within 48 hours after opening the envelope, during which time  
the product must be stored under 30° C at 80% maximum humidity.  
If it is necessary to store the product after opening the envelope, use dry-box storage or reseal the envelope.  
Baking  
If a product has remained packed in a humidity-proof envelope for six months or more, or if more than 48 hours have lapsed since the envelope  
was opened, bake the product under the following conditions before use:  
Reel: 60° C for 24 hours or more  
Bulk: 80°C for 4 hours or more  
4
Photomicrosensor (Transmissive) EE-SX1107  
(c) Energy control systems, combustion systems, railroad systems, aviation systems,  
medical equipment, amusement machines, vehicles, safety equipment, and  
installations subject to separate industry or government regulations.  
(d) Systems, machines, and equipment that could present a risk to life or property.  
3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING  
SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM  
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE  
PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE  
WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED  
VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY  
SELLER.  
5. Programmable Products: Seller shall not be responsible for the Buyer's programming of  
a programmable Product.  
Omron Electronic Components, LLC  
Terms and Conditions of Sales  
I. GENERAL  
1. Definitions: The words used herein are defined as follows.  
(a) Terms:  
(b) Seller:  
(c) Buyer:  
These terms and conditions  
Omron Electronic Components LLC and its subsidiaries  
The buyer of Products, including any end user in section III through VI  
(d) Products: Products and/or services of Seller  
(e) Including: Including without limitation  
2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments,  
invoices, purchase orders and other documents, whether electronic or in writing, relating  
to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's  
purchase order or other documents which are inconsistent with, or in addition to, these  
Terms.  
3. Distributor: Any distributor shall inform its customer of the contents after and including  
section III of these Terms.  
IV. WARRANTY AND LIMITATION  
1. Warranty: Seller's exclusive warranty is that the Products will be free from defects in  
materials and workmanship for a period of twelve months from the date of sale by Seller  
(or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY  
OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES,  
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR  
PURPOSE OF THE PRODUCTS.  
2. Buyer Remedy: Seller's sole obligation hereunder shall be to replace (in the form  
originally shipped with Buyer responsible for labor charges for removal or replacement  
thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an  
amount equal to the purchase price of the Product; provided that there shall be no  
liability for Seller or its affiliates unless Seller's analysis confirms that the Products were  
handled, stored, installed and maintained and not subject to contamination, abuse,  
misuse or inappropriate modification. Return of any Products by Buyer must be  
approved in writing by Seller before shipment.  
3. Limitation on Liability: SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR  
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF  
PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED  
WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT,  
WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL  
LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF  
THE PRODUCT ON WHICH LIABILITY IS ASSERTED.  
4. Indemnities: Buyer shall indemnify and hold harmless Seller, its affiliates and its  
employees from and against all liabilities, losses, claims, costs and expenses (including  
attorney's fees and expenses) related to any claim, investigation, litigation or proceeding  
(whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or  
omissions under these Terms or in any way with respect to the Products.  
II. SALES  
1. Prices; Payment: All prices stated are current, subject to change without notice by Seller.  
Buyer agrees to pay the price in effect at time of shipment. Payments for Products  
received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no  
right to set off any amounts against the amount owing in respect of this invoice.  
2. Discounts: Cash discounts, if any, will apply only on the net amount of invoices sent to  
Buyer after deducting transportation charges, taxes and duties, and will be allowed only  
if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past  
due amounts owing to Seller.  
3. Interest: Seller, at its option, may charge Buyer 1.5% interest per month or the maximum  
legal rate, whichever is less, on any balance not paid within the stated terms.  
4. Orders: Seller will accept no order less than 200 U.S. dollars net billing.  
5. Currencies: If the prices quoted herein are in a currency other than U.S. dollars, Buyer  
shall make remittance to Seller at the then current exchange rate most favorable to  
Seller; provided that if remittance is not made when due, Buyer will convert the amount  
to U.S. dollars at the then current exchange rate most favorable to Seller available  
during the period between the due date and the date remittance is actually made.  
6. Governmental Approvals: Buyer shall be responsible for all costs involved in obtaining  
any government approvals regarding the importation or sale of the Products.  
7. Taxes: All taxes, duties and other governmental charges (other than general real property  
and income taxes), including any interest or penalties thereon, imposed directly or  
indirectly on Seller or required to be collected directly or indirectly by Seller for the  
manufacture, production, sale, delivery, importation, consumption or use of the Products  
sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall  
be charged to and remitted by Buyer to Seller.  
V. INFORMATION; ETC.  
8. Financial: If the financial position of Buyer at any time becomes unsatisfactory to Seller,  
Seller reserves the right to stop shipments or require satisfactory security or payment in  
advance. If Buyer fails to make payment or otherwise comply with these Terms or any  
related agreement, Seller may (without liability and in addition to other remedies) cancel any  
unshipped portion of Products sold hereunder and stop any Products in transit until  
Buyer pays all amounts, including amounts payable hereunder, whether or not then due,  
which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid  
accounts.  
9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer  
indemnifies Seller fully against all costs or expenses arising in connection therewith.  
10. Force Majeure: Seller shall not be liable for any delay or failure in delivery resulting from  
causes beyond its control, including earthquakes, fires, floods, strikes or other labor  
disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots,  
delay in or lack of transportation or the requirements of any government authority.  
11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller:  
(a) All sales and shipments of Products shall be FOB shipping point (unless otherwise  
stated in writing by Seller), at which point title to and all risk of loss of the Products shall  
pass from Seller to Buyer, provided that Seller shall retain a security interest in the  
Products until the full purchase price is paid by Buyer;  
1. Intellectual Property: The intellectual property embodied in the Products is the exclusive  
property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way  
without the written permission of Seller. Buyer (at its own expense) shall indemnify and  
hold harmless Seller and defend or settle any action brought against Seller to the extent  
that it is based on a claim that any Product made to Buyer specifications infringed  
intellectual property rights of another party.  
2. Property; Confidentiality: Notwithstanding any charges to Buyer for engineering or  
tooling, all engineering and tooling shall remain the exclusive property of Seller. All  
information and materials supplied by Seller to Buyer relating to the Products are  
confidential and proprietary, and Buyer shall limit distribution thereof to its trusted  
employees and strictly prevent disclosure to any third party.  
3. Performance Data: Performance data is provided as a guide in determining suitability  
and does not constitute a warranty. It may represent the result of Seller's test conditions,  
and the users must correlate it to actual application requirements.  
4. Change In Specifications: Product specifications and description may be changed at any  
time based on improvements or other reasons. It is Seller’s practice to change part  
numbers when published ratings or features are changed, or when significant  
engineering changes are made. However, some specifications of the Product may be  
changed without any notice.  
(b) Delivery and shipping dates are estimates only; and  
(c) Seller will package Products as it deems proper for protection against normal  
handling and extra charges apply to special conditions.  
5. Errors And Omissions: The information on Seller’s website or in other documentation  
has been carefully checked and is believed to be accurate; however, no responsibility is  
assumed for clerical, typographical or proofreading errors or omissions.  
6. Export Controls: Buyer shall comply with all applicable laws, regulations and licenses  
regarding (a) export of the Products or information provided by Seller; (b) sale of  
Products to forbidden or other proscribed persons or organizations; (c)disclosure to  
non-citizens of regulated technology or information.  
12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products  
occurring before delivery to the carrier must be presented in detail in writing to Seller  
within 30 days of receipt of shipment.  
III. PRECAUTIONS  
VI. MISCELLANEOUS  
1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY  
OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE  
APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING  
APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE  
BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC  
COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E)  
SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT.  
Buyer acknowledges that it alone has determined that the Products will meet their  
requirements of the intended use in all cases. Buyer must know and observe all  
prohibitions of use applicable to the Product/s.  
2. Use with Attention: The followings are some examples of applications for which  
particular attention must be given. This is not intended to be an exhaustive list of all  
possible use of any Product, nor to imply that any use listed may be suitable for any  
Product:  
1. Waiver: No failure or delay by Seller in exercising any right and no course of dealing  
between Buyer and Seller shall operate as a waiver of rights by Seller.  
2. Assignment: Buyer may not assign its rights hereunder without Seller's written consent.  
3. Law: These Terms are governed by Illinois law (without regard to conflict of laws). Federal  
and state courts in Illinois have exclusive jurisdiction for any dispute hereunder.  
4. Amendment: These Terms constitute the entire agreement between Buyer and Seller  
relating to the Products, and no provision may be changed or waived unless in writing  
signed by the parties.  
5. Severability: If any provision hereof is rendered ineffective or invalid, such provision shall  
not invalidate any other provision.  
(a) Outdoor use, use involving potential chemical contamination or electrical  
interference.  
(b) Use in consumer Products or any use in significant quantities.  
Photomicrosensor (Transmissive) EE-SX1107  
5
Certain Precautions on Specifications and Use  
1. Suitability for Use. Seller shall not be responsible for conformity with any stan- 2. Programmable Products. Seller shall not be responsible for the user's  
dards, codes or regulations which apply to the combination of the Product in  
programming of a programmable product, or any consequence thereof.  
Buyer's application or use of the Product. At Buyer's request, Seller will pro- 3. Performance Data. Performance data given in this publication is provided as  
vide applicable third party certification documents identifying ratings and limi-  
tations of use which apply to the Product. This information by itself is not  
sufficient for a complete determination of the suitability of the Product in com-  
bination with the end product, machine, system, or other application or use.  
a guide for the user in determining suitability and does not constitute a war-  
ranty. It may represent the result of Seller's test conditions, and the users must  
correlate it to actual application requirements. Actual performance is subject to  
Seller's Warranty and Limitations of Liability.  
Buyer shall be solely responsible for determining appropriateness of the par- 4. Change in Specifications. Product specifications and accessories may be  
ticular Product with respect to Buyer's application, product or system. Buyer  
shall take application responsibility in all cases but the following is a non-  
exhaustive list of applications for which particular attention must be given:  
(i) Outdoor use, uses involving potential chemical contamination or electrical  
interference, or conditions or uses not described in this document.  
(ii) Energy control systems, combustion systems, railroad systems, aviation  
systems, medical equipment, amusement machines, vehicles, safety  
equipment, and installations subject to separate industry or government  
regulations.  
(iii) Use in consumer products or any use in significant quantities.  
(iv) Systems, machines and equipment that could present a risk to life or  
property. Please know and observe all prohibitions of use applicable to this  
product.  
changed at any time based on improvements and other reasons. It is our prac-  
tice to change part numbers when published ratings or features are changed,  
or when significant construction changes are made. However, some specifica-  
tions of the Product may be changed without any notice. When in doubt, spe-  
cial part numbers may be assigned to fix or establish key specifications for  
your application. Please consult with your Seller representative at any time to  
confirm actual specifications of purchased Product.  
5. Errors and Omissions. The information in this publication has been carefully  
checked and is believed to be accurate; however, no responsibility is assumed  
for clerical, typographical or proofreading errors, or omissions.  
6. RoHS Compliance. Where indicated, our products currently comply, to the  
best of our knowledge as of the date of this publication, with the requirements  
of the European Union's Directive on the Restriction of certain Hazardous  
Substances ("RoHS"), although the requirements of RoHS do not take effect  
until July 2006. These requirements may be subject to change. Please consult  
our website for current information.  
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS  
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM  
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT  
THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE  
INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.  
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website  
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.  
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.  
OMRON ON-LINE  
OMRON ELECTRONIC  
COMPONENTS LLC  
55 E. Commerce Drive, Suite B  
Schaumburg, IL 60173  
847-882-2288  
01/07  
Specifications subject to change without notice  
Printed in USA  
Cat. No. J01C-E-01  
6
Photomicrosensor (Transmissive) EE-SX1107  

Jenn Air EXPRESSIONS W30400S User Manual
JVC AV 21LS User Manual
JVC AV 25L33B User Manual
Kenmore 79044184601 User Manual
Krown Manufacturing KCS 50i User Manual
Lenovo 06P3799 User Manual
Lincoln Impinger Conveyor Oven Series 1200 User Manual
Nuance comm KINDLE 2 User Manual
Oricom SLIM 9000 User Manual
Parkinson Cowan LYRIC 50M User Manual