Oki 70037601 User Manual

OKI 70037401,  
70037501 & 70037601  
Memory DIMM  
Installation Instructions  
Getting Started  
The printers have four sockets for memory DIMM boards. You can expand the  
printer's memory up to 1 GB by installing four 256-MB DIMMs. To achieve the  
1 GB memory in most models, you will need to replace the DIMM(s) provided  
with 256 MB DIMMs:  
Model  
Memory Provided  
64 MB  
C7200  
C7200n  
C7400n  
C7400dxn  
C9200  
64 MB  
128 MB  
256 MB  
128 MB  
C9200n  
C9200dxn  
C9400dxn  
128 MB  
192 MB (64 + 128 MB)  
320 MB (64 + 256 MB)  
Caution!  
Circuit boards can be damaged by static electricity and rough handling. Keep  
board in packaging until you're ready to install it. DIMMs are sensitive to static  
electricity. To avoid damage, ground yourself before handling DIMMs.  
3
Prepare the Printer  
1 Turn the printer off and unplug the power cord.  
2 Detach the interface cable from the printer.  
3 Remove and save the thumbscrew at the top and bottom which hold the  
control board in place.  
C7000 Series  
C9000 Series  
4
4 Grasp the control board, loosen it by wiggling it back and forth, and slide it  
out of the printer.  
C7000 Series  
C9000 Series  
5
Install the DIMM(s)  
1 Locate the DIMM sockets (1) on the control board.  
DIMMs must be installed in the socket number sequence 1-3-2-4.  
!
Socket numbers (1) are located at the end of the sockets nearest the  
front of the board.  
6
2 Push out the white lock tabs at either end of the DIMM socket.  
Caution!  
Circuit boards can be damaged by static electricity and rough handling. To  
avoid damage, ground yourself before handling DIMMs.  
3 Remove the DIMM from its shipping package.  
4 Align the DIMM with the narrow strip (1) on its metallic contact edge toward  
the front of the control board, then carefully insert the DIMM in the socket.  
Press down firmly, until you feel the board engage the connector, then make  
sure the white tabs come up to lock the DIMM in place.  
5 Repeat steps 2 through 4 for each DIMM being installed.  
7
Complete the Installation  
1 Align the bottom of the control board with the track in the printer and slide it  
back into place.  
C7000 Series  
C9000 Series  
8
2 Reinstall the thumbscrews at the top and bottom of the board.  
C7000 Series  
C9000 Series  
3 Reattach the computer interface cable.  
4 Plug the power cord into the power outlet and turn the printer on.  
9
Check for Proper Installation  
Generate a MenuMap printout and check to be sure that the DIMMs are  
properly installed:  
1 Press MENU once or twice until INFORMATION MENU appears on the  
display.  
2 Press SELECT.  
PRINT MENU MAP appears on the display.  
3 Press SELECT.  
The MenuMap prints.  
4 Check the top of the MenuMap printout to verify that the DIMMs you  
installed are listed (they will appear as DIMMs).  
If the DIMM is not listed at the top of the MenuMap printout, remove the  
!
board and make sure the memory DIMM is firmly in place, then print the  
MenuMap again.  
10  
Change the Memory Setting  
in the Driver(s)  
Windows® Adobe® PostScript® Driver  
1 Click Start  
Settings  
Printers.  
The Printers dialog box opens.  
2 Right click the appropriate OKI (C7200, C7400, C9200 or C9400) PostScript  
driver icon, then click Properties.  
3 Windows 2000 & NT 4.0:  
a Click the Device Settings tab.  
b Scroll down to Installable Options and click Memory Configuration.  
c Under Change ‘Memory Configuration’ Setting, click the total memory  
installed (original plus the memory you just installed).  
Windows Me, 98 & 95  
a Click the Device Options tab.  
b Click Memory Configuration.  
c Under Change setting for: Memory Configuration, click the total  
memory installed (original plus the memory you just installed).  
4 Click OK, then close the Printers dialog box.  
Windows PCL Driver  
No changes are necessary in the PCL driver.  
11  
Macintosh® Driver  
1 Activate Chooser from the Apple menu.  
2 Select LaserWriter 8.  
3 Click Printer  
Setup.  
4 Click Configure.  
5 Change the Memory Configuration setting to match the total DIMM  
memory installed (original plus the new memory you just installed):  
6 Click OK twice, then close Chooser.  
12  
Limited Warranty:  
United States & Canada  
Oki Data Americas, Inc. (Oki Data) warrants this OPTION to be free from defect  
in material and workmanship and will remedy any such defect according to the  
terms of this Limited Warranty.  
Oki Data will repair (or at its option, replace) at no charge, any defective part(s)  
of the OPTION for one (1) year from the date of purchase. This Limited  
Warranty extends to the original purchaser only.  
To make request or claim for service under this Limited Warranty the original  
purchaser must return the Oki Data product, shipping prepaid, in the original  
shipping container or equivalent, to Oki Data or an authorized Oki Data service  
center and assume the risk of loss or damage in transit. A written receipt for the  
product, showing the date of purchase, dealer’s name, and item purchased must  
accompany any request or claim for work to be performed under this Limited  
Warranty.  
This Limited Warranty shall not apply if the product has been damaged due to  
abuse, misuse, misapplication, accident, or as a result of service or modification  
by any other than an authorized Oki Data service center.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE ON THE  
FACE HEREOF AND DESCRIBED ABOVE. NO WARRANTIES WHETHER  
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY  
13  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, SHALL EXTEND BEYOND THE RESPECTIVE  
WARRANTY PERIOD DESCRIBED ABOVE OF ONE (1) YEAR. Some states  
do not allow limitations on how long an implied warranty lasts, so the above  
limitation may not apply to you.  
OKI DATA SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY  
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSS  
ARISING FROM THE USE OF THIS PRODUCT. Some states do not allow the  
exclusion or limitation of incidental or consequential damages, so the above  
exclusion may not apply to you.  
Additional information on obtaining service under this Limited Warranty is  
available by contacting the Oki Data dealer from whom the product was  
purchased, by contacting Oki Data directly at 1-800-OKI-DATA (U.S. and  
Canada), or by contacting one of the service depots listed on the next page.  
This Limited Warranty applies to this Oki Data Option. However, the procedure  
for obtaining service may vary outside the continental United States. Contact  
your Oki Data dealer for such warranty service information.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
For the most comprehensive, up-to-date listing of Oki Data authorized Service  
Centers, go to http://www.okidata.com and click on Dealer Locator or call  
1-800-OKI-DATA (1-800-654-3282).  
14  
Oki Data Service Depot Information  
UNITED STATES  
CANADA  
Oki Data Americas, Inc.  
2020 Bishops Gate Blvd.  
Mt. Laurel, NJ 08054  
Oki Data Americas, Inc.  
2735 Matheson Blvd. East, Unit 1  
Mississauga, Ontario  
Canada L4W 4MB  
Tel: 1-800-654-3282  
Tel: 800-654-3282  
Fax: 1-856-222-5247  
Fax: 905-238-4427  
MEXICO  
BRAZIL  
Oki Data de Mexico, S.A. de C.V.  
Mariano Escobedo No. 748 - 8 Piso  
Col Anzures, e.p. 11590  
Mexico, DF  
Oki Data do Brasil, Ltda.  
Rua Alexandre Dumas, 2220 - 8 andar  
Chácara Sto Antonio  
São Paulo 04717-004, Brasil  
Tel: (525) 263-8780  
Tel: 55 11-3444-3500  
Fax: (525) 263-8785  
Fax: 55 11-3444-3501  
15  
Oki Data Americas, Inc.  
2000 Bishops Gate Blvd.  
Mt. Laurel, NJ 08054-4620  
Tel: (800) 654-3282  
FAX: (856) 222-5320  
58346602  

Jenn Air Cooktop CVEX4370 User Manual
Jenn Air CVGX2423B User Manual
JVC AV 28GT1SUF User Manual
JVC AV 29LX1 User Manual
JVC AV 36050 User Manual
Motorola L703m Cordless Phone L703M User Manual
Moxa Technologies UPORT 1150 User Manual
Philips 14PT1563 User Manual
Philips 150B5CG User Manual
Philips LCD Monitor SXGA User Manual