NEC NDR50 User Manual

NEC  
DVD RECORDER  
OWNER’S MANUAL  
MODEL : NDR50  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
Table of Contents  
INTRODUCTION  
DVR HOOKUP  
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . 2  
Connections . . . . . . . . . . . . . . . . . . . . . . . . 15-18  
Connecting to the Aerial . . . . . . . . . . . . . . . . . 15  
Connections to Your TV . . . . . . . . . . . . . . . . . 15  
Connecting to an Amplifier . . . . . . . . . . . . . . . 16  
Accessory Audio/Video (A/V) Connections  
Table of Contents . . . . . . . . . . . . . . . . . . . . . . 3-4  
DVD Recorder Overview. . . . . . . . . . . . . . . . 5-10  
Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 5  
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Disc-related terms . . . . . . . . . . . . . . . . . . . . . . 6  
• Types of video CDs . . . . . . . . . . . . . . . . . . 6  
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 6  
to DVD Recorder . . . . . . . . . . . . . . . . . . . . . . 17  
Connecting a Digital Camcorder . . . . . . . . . . . 17  
Before Operation. . . . . . . . . . . . . . . . . . . . . 18-30  
Initial Settings. . . . . . . . . . . . . . . . . . . . . . . . . 18  
General Operation . . . . . . . . . . . . . . . . . . . . . 18  
General . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-22  
• Auto Programming . . . . . . . . . . . . . . . . . . 18  
• Program Edit. . . . . . . . . . . . . . . . . . . . 19-20  
• Clock Set . . . . . . . . . . . . . . . . . . . . . . . . . 21  
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . 21  
• Display Mode . . . . . . . . . . . . . . . . . . . . . . 21  
• PBC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
• Factory Set . . . . . . . . . . . . . . . . . . . . . . . 21  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
• Display Language . . . . . . . . . . . . . . . . . . 22  
• Disc Language. . . . . . . . . . . . . . . . . . . . . 22  
Audio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22-23  
• Dolby Digital. . . . . . . . . . . . . . . . . . . . . . . 22  
• DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
• MPEG . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
• Sampling Frequency . . . . . . . . . . . . . . . . 23  
• DRC (Dynamic Range Control). . . . . . . . . 23  
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Lock (Parental Control) . . . . . . . . . . . . . . . 24-25  
• Set Password. . . . . . . . . . . . . . . . . . . . . . 24  
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
• Country Code. . . . . . . . . . . . . . . . . . . . . . 25  
Recording . . . . . . . . . . . . . . . . . . . . . . . . . 25-26  
• Record Mode Set . . . . . . . . . . . . . . . . . . . 25  
• Record Aspect . . . . . . . . . . . . . . . . . . . . . 25  
• DV Rec Audio . . . . . . . . . . . . . . . . . . . . . 26  
• TV Rec Audio. . . . . . . . . . . . . . . . . . . . . . 26  
• Auto Chapter . . . . . . . . . . . . . . . . . . . . . . 26  
Disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27  
• Disc Format . . . . . . . . . . . . . . . . . . . . . . . 26  
• Finalize . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
• Disc Label . . . . . . . . . . . . . . . . . . . . . . . . 27  
• Disc Protect . . . . . . . . . . . . . . . . . . . . . . . 27  
General Explanation of On-Screen Display. 28-30  
• About the  
symbol display . . . . . . . . . . . . 6  
• About the disc symbols for instructions. . . . 6  
About DVD-R and DVD-RW disc. . . . . . . . . . . . 7  
• What are ‘recording modes’? . . . . . . . . . . . 7  
• Is editing a DVD like editing a video tape? . 7  
• About word ‘Original’ and ‘Playlist’ . . . . . . . 7  
About DVD+R and DVD+RW disc. . . . . . . . . . . 7  
About DVD recording . . . . . . . . . . . . . . . . . . . . 8  
• Disc types and recording formats, modes,  
and settings . . . . . . . . . . . . . . . . . . . . . . . . 8  
• Notes for recording. . . . . . . . . . . . . . . . . . . 8  
• Recording TV audio channels. . . . . . . . . . . 9  
• Restrictions on video recording. . . . . . . . . . 9  
• What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . 9  
• Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Remote Control Operation Range. . . . . . . . . . . 9  
Remote Control Battery Installation. . . . . . . . . . 9  
Reset the DVD Recorder . . . . . . . . . . . . . . . . . 9  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
• Handling the unit . . . . . . . . . . . . . . . . . . . 10  
• Cleaning the unit . . . . . . . . . . . . . . . . . . . 10  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . 10  
• Handling discs . . . . . . . . . . . . . . . . . . . . . 10  
• Storing discs . . . . . . . . . . . . . . . . . . . . . . 10  
• Cleaning discs . . . . . . . . . . . . . . . . . . . . . 10  
Front Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Function Display Window . . . . . . . . . . . . . . . . 12  
Remote Control Overview . . . . . . . . . . . . . . . . 13  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Displaying Information While Watching TV. . 28  
• Displaying Disc Information on-screen. 28-30  
3
Table of Contents  
Recording from External Input . . . . . . . . . . 41-42  
Recording from External Components. . . . . . . 41  
Recording from a Digital Camcorder . . . . . . . . 41  
What is DV? . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
• DV-Related Messages . . . . . . . . . . . . . . . 42  
• Troubleshooting . . . . . . . . . . . . . . . . . . . . 42  
PLAYBACK  
Operation with DVD and Video CD. . . . . . . 31-34  
Playing a DVD or Video CD . . . . . . . . . . . . . . 31  
General Feature . . . . . . . . . . . . . . . . . . . . . . . 31  
• Moving to another TITLE . . . . . . . . . . . . . 31  
• Moving to another CHAPTER/TRACK . . . 31  
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
EDITING  
Still Picture and Frame-by-Frame Playback . 31  
• Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 32  
• Random. . . . . . . . . . . . . . . . . . . . . . . . . . 32  
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 32  
• Time Search. . . . . . . . . . . . . . . . . . . . . . . 32  
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
• Marker Search . . . . . . . . . . . . . . . . . . . . 33  
• Checking the contents of  
Title List and Chapter List Menu . . . . . . . . 43-47  
VR  
Using the Title List-Original menu  
. . . . . . 43  
VR  
Using the Chapter List-Original menu  
. . . 43  
VR  
Using the Title List-Playlist menu  
. . . . . . 44  
VR  
Using the Chapter List-Playlist menu  
. . . 44  
Video  
Using the Title List menu  
. . . . . . . . . . . . 45  
• Deleting a Title . . . . . . . . . . . . . . . . . . . . . 45  
• If the disc has already been finalized . . . . 45  
+RW  
DVD Video discs: Menus . . . . . . . . . . . . . 33  
• Title Menu . . . . . . . . . . . . . . . . . . . . . . . . 33  
• Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . 33  
• Camera Angle . . . . . . . . . . . . . . . . . . . . . 33  
• Changing the Audio Soundtrack . . . . . . . . 33  
• Changing the Audio Channel . . . . . . . . . . 34  
• 3D Surround . . . . . . . . . . . . . . . . . . . . . . 34  
• Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . 34  
• Instant Skip . . . . . . . . . . . . . . . . . . . . . . . 34  
• Finding Locations on a Disc . . . . . . . . . . . 34  
• Last Condition Memory. . . . . . . . . . . . . . . 34  
• PIP (Picture in Picture) . . . . . . . . . . . . . . . 34  
Audio CD and MP3 Operation. . . . . . . . . . . 35-36  
Playing an Audio CD or MP3 Disc. . . . . . . . . . 35  
Music menu options . . . . . . . . . . . . . . . . . . . . 35  
• Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
• Moving to Another Track. . . . . . . . . . . . . . 36  
• Repeat Track/All(Floder)/Off . . . . . . . . . . . 36  
• Random. . . . . . . . . . . . . . . . . . . . . . . . . . 36  
• 3D Surround . . . . . . . . . . . . . . . . . . . . . . 36  
• Change the Audio Channel. . . . . . . . . . . . 36  
• Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
• Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . 36  
Notes on MP3 Recordings. . . . . . . . . . . . . . 36  
Programmed Playback with Audio CD and MP3 . 37  
JPEG Disc Operation . . . . . . . . . . . . . . . . . . . . . . 38  
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . . 38  
• Skip Image. . . . . . . . . . . . . . . . . . . . . . . . 38  
• Rotate Images . . . . . . . . . . . . . . . . . . . . . 38  
• View Slide Shows. . . . . . . . . . . . . . . . . . . 38  
• Notes or JPEG Recordings. . . . . . . . . . . . 38  
Using the Title List menu  
. . . . . . . . . . . . 46  
+RW  
Using the Chapter List menu  
. . . . . . . . . 46  
+R  
Using the Title List menu  
Using the Chapter List menu  
. . . . . . . . . . . . 47  
+R  
. . . . . . . . . 47  
Title and Chapter Editing . . . . . . . . . . . . . . 48-54  
Titles, Chapters and Parts. . . . . . . . . . . . . . . . 48  
Adding Chapter Markers . . . . . . . . . . . . . . . . . 48  
Changing Title Thumbnails . . . . . . . . . . . . . . . 48  
Making a New Playlist. . . . . . . . . . . . . . . . . . . 49  
Adding Additional Title/Chapters to the Playlist 49  
Deleting a Title/Chapter . . . . . . . . . . . . . . . . . 50  
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . . 50  
Undoing/Redoing the Last Deleting. . . . . . . . . 51  
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . . 51  
Combining Two Chapters Into One . . . . . . . . . 52  
Moving a Playlist Chapter . . . . . . . . . . . . . . . . 52  
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Hide a Title/Chapter . . . . . . . . . . . . . . . . . . . . 53  
Divide One Title Into Two . . . . . . . . . . . . . . . . 54  
Additional Information. . . . . . . . . . . . . . . . . . . 55  
Clean-up Recording . . . . . . . . . . . . . . . . . . . . 55  
Overwrite Recording . . . . . . . . . . . . . . . . . . . . 55  
Viewing Title List menu displayed on other  
DVD recorders or players . . . . . . . . . . . . . . . . 55  
Playing your recordings on other  
DVD players (Finalizing a Disc). . . . . . . . . . . . 55  
REFERENCE  
Language Code List. . . . . . . . . . . . . . . . . . . . . 56  
Country Code List . . . . . . . . . . . . . . . . . . . . . . 57  
Controlling Your TV with the Supplied Remote . 58  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 59-60  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 61  
RECORDING  
Basic Recording. . . . . . . . . . . . . . . . . . . . . . . . 39  
Basic Recording from a TV . . . . . . . . . . . . . . . 39  
Instant Timer Recording . . . . . . . . . . . . . . . . . 39  
Timer Recording . . . . . . . . . . . . . . . . . . . . . . . 40  
Checking Timer Recording Details . . . . . . . . . 40  
Canceling a Timer Recording . . . . . . . . . . . . . 40  
Stopping a Timer Recording in Progress . . . . . 40  
Timer Recording Troubleshooting . . . . . . . . . . 40  
About the symbols for instructions  
Indicates hazards likely to cause harm to the unit  
itself or other material damage.  
Indicates special operating features of this unit.  
Indicates tips and hints for making the task easier.  
4
DVD Recorder Overview  
Recordable Discs  
Playable Discs  
DVD-RW (Digital Video Disc - ReWritable):  
DVD  
These Discs can be recorded on repeatedly.  
Recordings can be erased, then you can  
record again on the same Disc.  
(8 cm/12 cm disc)  
Video CD (VCD)  
(8 cm / 12 cm disc)  
DVD-R (Digital Video Disc - Recordable):  
These Discs can be recorded only once.  
After you finalize a DVD-R, you cannot  
record on it or edit it any more.  
Audio CD  
(8 cm/12 cm disc)  
In addition, this unit can play DVD-R/DVD-RW discs;  
DVD+R/DVD+RW discs; CD-R/CD-RW discs that  
contain audio titles, MP3 files, or JPEG files; SVCD;  
and kodak picture CDs.  
DVD+RW (Digital Video Disc + ReWritable):  
These Discs can be recorded on repeatedly.  
Recordings can be erased, then you can  
record again on the same Disc.  
otes  
DVD+R (Digital Video Disc + Recordable):  
These Discs can be recorded only once.  
After you finalize a DVD+R, you cannot  
record on it or edit it any more.  
– Depending on the conditions of the recording equip-  
ment or the CD-R/RW (or DVD R/ RW) disc itself,  
some CD-R/RW (or DVD R/ RW) discs cannot be  
played on the unit.  
– Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
otes  
Do not use irregularly shaped CDs (e.g., heart-shaped  
or octagonal). Doing so may result in malfunctions.  
– This recorder cannot record CD-R or CD-RW discs.  
– DVD-R/RW, DVD+R/RW and CD-R/RW discs record-  
ed using a personal computer or a DVD or CD  
recorder may not play if the disc is damaged or dirty,  
or if there is dirt of condensation on the recorder’s  
lens.  
Regional code of the DVD Recorder and DVDs  
This DVD Recorder is designed and manufac-  
tured for playback of Region 4 encoded DVD  
4
software. The region code on the labels of some DVD  
discs indicates which type of DVD Recorder can play  
those discs. This unit can play only DVD discs labeled 4  
or ALL. If you try to play any other discs, the message  
“Incorrect region code. Can’t play back” will appear on  
the TV screen. Some DVD discs may not have a region  
code label even though their playback is prohibited by  
area limits.  
– If you record a disc using a personal computer, even  
if it is recorded in a compatible format, there are  
cases in which it may not play because of the settings  
of the application software used to create the disc.  
(Check with the software publisher for more detailed  
information.)  
otes on DVDs and Video CDs  
Some playback operations of DVDs and Video CDs  
may be intentionally fixed by software manufacturers.  
As this unit plays DVDs and Video CDs according to  
disc content designed by the software manufacturer,  
some playback features of the unit may not be available  
or other functions may be added.  
Refer also to the instructions supplied with the DVDs  
and Video CDs. Some DVDs made for business pur-  
poses may not be played on the unit.  
5
DVD Recorder Overview (Continued)  
Disc-related terms  
About Symbols  
Title (DVD only)  
The main film content or accompanying feature content  
About the  
symbol display  
or music album.  
Each title is assigned a title reference number enabling  
you to locate it easily.  
” may appear on the TV screen during operation.  
This icon means the function explained in this owner’s  
manual is not available on that specific disc.  
About the disc symbols for instructions  
Chapter (DVD only)  
Sections of a picture or a musical piece that are smaller  
than titles. A title is composed of one or several chap-  
ters. Each chapter is assigned a chapter number to  
enable you to locate the chapter you want. Depending  
on the disc, chapters may not be labeled.  
A section whose title has one of the following symbols  
are applicable only to those discs represented by the  
symbol.  
Many functions of this recorder are dependent on the  
recording mode. One or more of the symbols  
Track (Video CD and audio CD only)  
(
Video  
,
VR  
,
+R  
+RW ) appear by each  
,
Sections of a picture or a musical piece on a video CD  
or an audio CD. Each track is assigned a track number,  
enabling you to locate the track you want.  
function explained in this manual so that you can see at  
a glance whether it’s relevant for the disc loaded.  
Video DVD-R/RW with Video recording mode  
Scene  
VR  
+R  
DVD-RW with VR recording mode  
DVD+R disc  
On a video CD with PBC (Playback control) functions,  
moving pictures and still pictures are divided into sec-  
tions called “Scenes”. Each scene available is displayed  
on the Scene menu and assigned a scene number,  
enabling you to locate the scene you want.  
A scene may be composed of one or several tracks.  
+RW DVD+RW disc  
DVD DVD-Video disc  
VCD Video CDs  
CD  
MP3 MP3 CDs  
JPEG CDs  
Audio CDs  
Types of video CDs  
There are two types of video CDs:  
JPEG  
Video CDs equipped with PBC (Version 2.0)  
PBC (Playback control) functions allow you to interact  
with the system via menus, search functions, or other  
typical computer-like operations. Moreover, high resolu-  
tion still pictures can be played if they are included on  
the disc.  
The finalized DVD disc is as DVD-Video disc  
Video CDs not equipped with PBC (Version 1.1)  
Operated in the same way as audio CDs, these discs  
allow playback of video pictures as well as sound, but  
they are not equipped with PBC.  
6
DVD Recorder Overview (Continued)  
Is editing a DVD like editing a video tape?  
About DVD-R and DVD-RW disc  
No. When you edit a video tape you need one video  
deck to play the original tape and another to record the  
edits. With DVD, you edit by making a ‘Playlist’ of what  
to play and when to play it. On playback, the recorder  
plays the disc according to the Playlist.  
How are DVD-R and DVD-RW discs different?  
The essential difference between DVD-R and DVD-RW  
is that DVD-R is a record-once medium, while DVD-RW  
is a re-recordable/erasable medium. You can re-record/  
erase a DVD-RW disc approximately 1,000 times.  
About word Originaland Playlist’  
Can I play my recordable discs in a regular DVD  
player?  
Generally, DVD-R discs and DVD-RW discs recorded in  
Video mode are playable in a regular DVD player, but  
they must be ‘finalized’ first. This process fixes the con-  
tents of the disc to make them readable to other DVD  
players as DVD-Video discs.  
Throughout this manual, you will often see the words  
Original and Playlist to refer to the actual content and  
the edited version.  
Original: content refers to what’s actually recorded  
on the disc.  
Playlist: content refers to the edited version of the  
disc — how the Original content is to be played.  
DVD-RW discs recorded in VR (Video Recording) mode  
are playable in some players.  
About DVD+R and DVD+RW disc  
This indicates a product feature that is capa-  
ble of playing DVD-RW discs recorded with  
Video Recording format.  
How are DVD+R and DVD+RW discs different?  
The essential difference between DVD+R and DVD+RW  
is that DVD+R is a record-once medium, while  
DVD+RW is a re-recordable/erasable medium. You can  
re-record/ erase a DVD+RW disc approximately 1,000  
times.  
What are recording modes?  
There are two recording modes available using this  
recorder: VR mode and Video mode. When recording to  
a DVD-R disc, recordings are always in Video mode.  
DVD-RW discs can be formatted for VR mode recording  
or Video mode recording.  
DVD+RW mode recording  
• 4 different picture quality/recording time settings avail-  
able (HQ, SQ, LQ, EQ)  
• Playable on regular DVD players  
• The edited contents is playable on regular DVD play-  
ers only after finalizing  
VR mode recording  
• 4 different picture quality/recording time settings avail-  
able (HQ, SQ, LQ, EQ)  
• Recordings can be edited the title/chapter  
• Not playable on regular DVD players  
• Recordings can be extensively edited  
DVD+R mode recording  
• 4 different picture quality/recording time settings avail-  
able (HQ, SQ, LQ, EQ)  
Video mode recording  
• 4 different picture quality/recording time settings avail-  
• Playable on regular DVD players (after finalizing)  
• Any edited contents are not be compatible on regular  
DVD players. (Hide, chapter combine, added chapter  
mark, etc.)  
able (HQ, SQ, LQ, EQ)  
• Playable on regular DVD players (after finalizing)  
• Limited editing features  
• Limited title/chapter editing features  
ote  
DVD-Video Format (Video mode) is a new format for  
recording on DVD-R/RW and DVD+R/RW discs that  
was approved by the DVD Forum in 2000. You may  
therefore experience problems playing recordable DVD  
discs in some players. Symptoms include video arti-  
facts, audio and/or video dropouts and playback sud-  
denly stopping.  
Our company cannot take responsibility for problems  
playing discs recorded on this recorder in other players.  
7
DVD Recorder Overview (Continued)  
Notes for recording  
About DVD recording  
• The recording times shown are not exact because the  
recorder uses variable bit-rate video compression.  
This means that the exact recording time will depend  
on the material being recorded.  
• When recording a TV broadcast, if the reception is  
poor or the picture contains interference, the record-  
ing times may be shorter.  
• If you record still pictures or audio only, the recording  
time may be longer.  
• The displayed times for recording and time remaining  
may not always add up to exactly the length of the  
disc.  
otes  
• This recorder cannot make recordings on CD-R or  
CD-RW discs.  
• Our company takes no responsibility for recording fail-  
ure due to power cuts, defective discs, or damage to  
the recorder.  
• Fingerprints and small scratches on a disc can affect  
playback and/or recording performance. Please take  
proper care of your discs.  
Disc types and recording formats, modes,  
and settings  
• The recording time available may decrease if you  
heavily edit a disc.  
• If using a DVD-RW disc, make sure you change the  
recording format (Video mode or VR mode) before  
you record anything on the disc. See page 26 (Disc  
Format) for how to do this.  
• When using a DVD-R disc, you can keep recording  
until the disc is full, or until you finalize the disc.  
Before you start a recording session, check the  
amount of recording time left on the disc.  
• When using a DVD-RW disc in Video mode, recording  
time available will only increase if you erase the last  
title recorded on the disc.  
• The Erase Title option in the Title List-Original menu  
only hides the title, it does not actually erase the title  
from the disc and increase the recording time avail-  
able (except for the last recorded title on a DVD-RW  
disc in Video mode).  
This recorder can play five different kinds of DVD disc:  
pre-recorded DVD-Video discs, DVD-RW, DVD-R,  
DVD+RW and DVD+R discs. The disc format for DVD-R  
discs is always “Video format”—the same as pre-record-  
ed DVD-Video discs. This means that once finalized,  
you can play a DVD-R in a regular DVD player.  
By default, the DVD-RW disc format is Video Recording  
format, though you can change this to Video format, if  
required. (Reinitializing the disc will erase the contents  
of the disc.)  
The recording mode is closely related to the disc for-  
mat. If the disc format is Video Recording format, then  
the recording mode is VR mode; if the disc format is  
Video mode, then the recording mode is Video mode  
(except for DVD-Video, which is not recordable, and so  
does not have a recording mode).  
• The overwrite recording is available with DVD+RW  
disc.  
Within the recording modes (which are fixed for the  
whole disc) are the record settings. These can be  
changed as required for each recording and determine  
the picture quality and how much space the recording  
will take up on the disc.  
Disc type  
DVD-Video  
DVD-RW  
Disc format  
Recording mode  
n/a  
Functions  
Video format  
Playback only  
Video Recording  
format (default)  
VR mode  
Playback, recording, Original/Playlist editing  
Video format  
Video format  
Video mode  
Video mode  
Playback, limited recording, limited editing  
DVD-R  
Playback, limited recording, limited editing  
DVD+RW  
DVD+R  
+RW Video format DVD+RW  
+R Video format DVD+R  
Playback, limited recording, Title/Chapter editing  
Playback, limited recording, limited Title/Chapter editing  
8
DVD Recorder Overview (Continued)  
Restrictions on video recording  
Remote Control Operation Range  
You cannot record copy-protected video using this  
recorder. Copy-protected video includes DVD-Video  
discs and some satellite broadcasts. If copy-protected  
material is encountered during a recording, recording  
will pause or stop automatically and an error message  
will be displayed on-screen.  
• Video that is ‘copy-once only’ can only be recorded  
using a DVD-RW disc in VR mode with CPRM (see  
below).  
• NTSC format signals from the analog or the DV  
inputs is not recorded correctly with this recorder.  
• Video signals in SECAM format (from the built-in TV  
tuner or from the analog inputs) are recorded in PAL  
format.  
Point the remote control at the remote sensor and press  
the buttons.  
Remote Control Battery Installation  
Detach the battery cover on the rear of  
the remote control, and insert two R03  
(size AAA) batteries with  
aligned correctly.  
and  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
What is CPRM?  
Reset the DVD Recorder  
CPRM is a copy protection system (with scramble sys-  
tem) only allowing the recording of ‘copy once’ broad-  
cast programs. CPRM stands for Content Protection for  
Recordable Media.  
If you observe any of the following symptoms...  
The unit is plugged in, but the power will not turn on  
or off.  
This recorder is CPRM compatible, which means that  
you can record copy-once broadcast programs, but you  
cannot then make a copy of those recordings. CPRM  
recordings can only be made on DVD-RW discs format-  
ted in VR mode, and CPRM recordings can only be  
played on players that are specifically compatible with  
CPRM.  
The front panel display is not working.  
The DVD Recorder is not operating normally.  
...you can reset the DVD Recorder as follows:  
Press and hold the POWER button for at least five  
seconds. This will force the unit to power off.  
Press the POWER button again to turn the unit back  
on.  
Unplug the power cord, wait at least five seconds,  
and then plug it in again.  
Copyright  
• Recording equipment should be used only for lawful  
copying and you are advised to check carefully what  
is lawful copying in the country in which you are mak-  
ing a copy. Copying of copyright material such as  
films or music is unlawful unless permitted by a legal  
exception or consented to by the rights owner.  
• This product incorporates copyright protection tech-  
nology that is protected by method claims of certain  
U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and  
is intended for home and other limited viewing uses  
only unless otherwise authorized by Macrovision cor-  
poration. Reverse engineering or disassembly is pro-  
hibited.  
9
DVD Recorder Overview (Continued)  
Precautions  
Notes on Discs  
Handling discs  
Handling the unit  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints will not get on the  
surface. Do not stick paper or tape on the disc.  
When shipping the unit  
The original shipping carton and packing materials  
come in handy. For maximum protection, re-pack the  
unit as it was originally packaged at the factory.  
When setting up the unit  
The picture and sound of a nearby TV, VCR, or radio  
may be distorted during playback. In this case, position  
the unit away from the TV, VCR, or radio, or turn off the  
unit after removing the disc.  
Storing discs  
After playing, store the disc in its case.  
To keep the surface clean  
Do not expose the disc to direct sunlight or sources of  
heat, or leave it in a parked car exposed to direct sun-  
light, as there may be a considerable temperature  
increase inside the car.  
Do not use volatile liquids, such as insecticide spray,  
near the unit. Do not leave rubber or plastic products in  
contact with the unit for a long period of time. They will  
leave marks on the surface.  
Cleaning discs  
Cleaning the unit  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing, clean  
the disc with a clean cloth. Wipe the disc from the cen-  
ter outward.  
To clean the cabinet  
Use a soft, dry cloth. If the surfaces are extremely dirty,  
use a soft cloth lightly moistened with a mild detergent  
solution. Do not use strong solvents such as alcohol,  
benzine, or thinner, as these might damage the surface  
of the unit.  
Yes  
No  
To obtain a clear picture  
The DVD Recorder is a high-tech, precision device. If  
the optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality will be poor.  
Regular inspection and maintenance are recommended  
after every 1,000 hours of use. (This depends on the  
operating environment.)  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
For details, please contact your nearest dealer.  
10  
Front Panel  
INPUT2 (VIDEO IN/AUDIO IN (Left/Right))  
Connect the audio/video output of an external source  
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).  
REC (z)  
Starts recording. Press repeatedly  
to set the recording time.  
STOP (x)  
Stops playback or recording.  
POWER button and indicator  
Switches the DVD Recorder ON or OFF.  
Lights up red when the recorder is in  
standby mode.  
PAUSE (X)  
Pause playback or recording temporarily,  
press again to exit pause mode.  
INPUT 2 (S-VIDEO IN)  
PLAY (N)  
To play back a disc.  
Connect the S-Video output of an  
external source (TV/ Monitor, VCR,  
Camcorder, etc.).  
OPEN/CLOSE (Z)  
Opens or closes the disc tray.  
DV INPUT  
Connect the DV output of a digital camcorder.  
Disc Tray  
Insert a disc here.  
PROG. (+/-)  
Scans up or down through  
memorized channels.  
Display window  
Shows the current status of the DVD Recorder.  
Remote Sensor  
Point the DVD Recorder remote control here.  
m/.  
Go to beginning of current chapter/ track or to previous chapter/track.  
Press and hold for two seconds for a fast reverse search during playback.  
>/M  
Go to NEXT chapter/track.  
Press and hold for two seconds for a fast forward search during playback.  
11  
Function Display Window  
Disc type indicators  
REC The recorder is recording.  
Indicates the type of disc loaded.  
Indicates when the recorder is in timer  
recording or a timer recording is programmed.  
HQ, SQ, LQ, EQ  
Indicates recording mode.  
ST Indicates a stereo broadcast is being received.  
BIL Indicates when a BILINGUAL broadcast  
is being received.  
CHP Indicates current chapter number.  
TRK Indicates current track number.  
TITLE Indicates  
current title number  
DVD A + - R W  
TITLE  
TRK CHP BIL  
ST  
HQ SQ LQ EQ  
REC  
S
V CD -RW  
Character indicators  
Indicates clock, total playing time, elapsed time, title number,  
chapter/track number, channel, etc.  
12  
Remote Control Overview  
PIP  
OPEN/CLOSE (Z)  
Opens and closes the disc tray.  
Selects PIP function on or off.  
POWER  
TV Control Buttons  
Switches the recorder ON or OFF.  
POWER: Turns the TV on or off.  
AV: Selects the TV’s source.  
PR +/: Selects TV’s channel.  
VOL +/: Adjusts TV’s volume.  
MUTE: Temporarily turns TV sound  
OFF, press again to restore.  
0-9 numerical buttons  
Selects numbered options in a menu.  
AV  
Changes the input to use for recording  
(Tuner, AV1-2, or DV IN).  
SKIP (. / >)  
AUDIO  
Selects an audio language (DVD) or an  
audio channel (CD).  
Go to next chapter or track. Returns to  
beginning of current chapter or track or  
go to previous chapter or track.  
SUBTITLE  
Selects a subtitle language.  
SCAN (m / M)  
Search backward or forward.  
ANGLE  
Selects a DVD camera angle,  
if available.  
PAUSE/STEP (X)  
Pause playback or recording temporari-  
ly, press again to exit pause mode.  
REC (z)  
Starts recording. Press repeatedly to set  
the recording time.  
N (PLAY)  
Starts playback.  
STOP (x)  
Stops playback or recording.  
REC MODE  
Selects the recording mode:  
HQ, SQ, LQ, or EQ.  
MENU/LIST  
Accesses menu on a DVD disc, Title List  
or Playlist menu.  
TIMER REC  
Displays Timer Record menu.  
SETUP  
CLEAR  
Removes a track number on the  
Program List or a mark on the  
Marker Search menu.  
Accesses or removes the Setup menu.  
ENTER  
- Acknowledges menu selection.  
- Displays information while viewing a  
TV program.  
ZOOM  
Enlarges DVD video image.  
b / B / v / V (left/right/up/down)  
Selects an option in the menu.  
PR v / V (up/down)  
Scans up or down through memorized  
channels.  
INSTANT SKIP  
Skips 15 seconds forward on the disc  
(about the length of a typical TV  
commercial).  
TITLE  
Displays the disc’s Title menu, if  
available.  
DISPLAY  
Accesses On-Screen Display.  
RETURN (O)  
THUMBNAIL  
Selects a thumbnail picture for the  
current title and chapter for use in the  
Original and Playlist menu.  
- Removes the menu.  
- Displays the menu of a video CD  
with PBC.  
3D SURR.  
Selects 3D SURROUND during  
playback.  
CHP ADD  
Inserts a chapter marker when playing/  
recording a VR mode DVD-RW disc.  
RANDOM  
Plays tracks in random order.  
MARKER  
Marks any point during playback.  
REPEAT  
Repeat chapter, track, title, all.  
SEARCH  
Displays Marker Search menu.  
A-B  
PROGRAM  
Add the track to the Program List.  
Repeat sequence.  
13  
Rear Panel  
AERIAL  
Connect the aerial to this terminal.  
COAXIAL (Digital audio out jack)  
Connect to digital (coaxial) audio equipment.  
COMPONENT VIDEO OUT (Y Pb Pr)  
Connect to a TV with Y Pb Pr inputs.  
VIDEO OUT/AUDIO OUT (Left/Right)  
Connect to a TV with video and audio inputs.  
VIDEO IN 1 / AUDIO IN 1 (Left/Right)  
Connect the audio/video output of an external source  
(Audio system, TV/Monitor, VCR, Camcorder).  
AC Power Cord  
Plug into the power source.  
OPTICAL (Digital audio out jack)  
Connect to digital (optical) audio equipment.  
S-VIDEO OUT  
Connect to a S-Video Input on TV.  
RF. OUT  
Passes the signal from the AERIAL to your TV/monitor  
Caution  
Do not touch the inner pins of the jacks on the rear  
panel. Electrostatic discharge may cause permanent  
damage to the unit.  
14  
Connections  
Connections to Your TV  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
ips  
Depending on your TV and other equipment you wish  
to connect, there are various ways you could connect  
the recorder. Use only one of the connections  
described below.  
Please refer to the manuals of your TV, VCR, Stereo  
System or other devices as necessary to make the  
best connections.  
Video connection  
Connect the VIDEO OUT jack on the DVD Recorder to  
the video in jack on the TV using the video cable (V).  
S-Video connection  
Caution  
Connect the S-VIDEO OUT jack on the DVD Recorder  
to the S-Video in jack on the TV using the S-Video  
cable (S).  
Make sure the DVD Recorder is connected directly to  
the TV. Tune the TV to the correct video input channel.  
– Do not connect the DVD Recorder’s AUDIO OUT jack  
to the phono in jack (record deck) of your audio sys-  
tem.  
– Do not connect your DVD Recorder via your VCR.  
The DVD image could be distorted by the copy pro-  
tection system.  
Component Video connection  
Connect the COMPONENT VIDEO OUT jacks on the  
DVD Recorder to the corresponding input jacks on the  
TV using an Y Pb Pr cable (C).  
Audio (Left/Right) Connection  
Connecting to the Aerial  
Connect the left and right AUDIO OUT jacks of the DVD  
Recorder to the audio left and right IN jacks on the TV  
using the audio cables (A). Do not connect the DVD  
Recorder’s AUDIO OUT jack to the phono in jack  
(record deck) of your audio system.  
Remove the aerial cable plug from your TV set and  
insert it into the aerial socket at the back of the DVD  
recorder. Plug one end of the aerial cable into the TV  
socket on the DVD recorder and the other end into the  
aerial input socket on your TV set.  
Rear of TV  
RF coaxial connection  
SCART INPUT  
S-VIDEO  
INPUT  
VIDEO  
INPUT  
Connect the RF. OUT jack on the DVD Recorder to the  
aerial input jack on the TV using the 75-ohm Coaxial  
Cable supplied (R). The RF. OUT jack passes the signal  
through from the AERIAL jack.  
AUDIO INPUT  
COMPONENT VIDEO INPUT  
Pr  
R
Y
Pb  
L
Rear of TV  
Aerial  
SCART INPUT  
VIDEO  
INPUT  
ANTENNA  
INPUT  
AUDIO INPUT  
S
A
V
C
R
L
R
Rear of DVD Recorder  
Rear of DVD Recorder  
15  
Connections (Continued)  
Connecting to an Amplifier  
Rear of DVD Recorder  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic ll/  
Pro Logic  
Connect the Left and Right AUDIO OUT jacks on the  
DVD Recorder to the audio left and right in jacks on  
your amplifier, receiver, or stereo system, using the  
audio cables (A).  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/  
Video receiver equipped with a multi-channel  
decoder (Dolby Digital, MPEG 2, or DTS)  
X
A
O
Connect one of the DVD Recorder’s DIGITAL  
1
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to  
the corresponding in jack on your amplifier. Use an  
optional digital (optical O or coaxial X) audio cable.  
L
R
COAXIAL  
OPTICAL  
DIGITAL INPUT  
AUDIO INPUT  
DIGITAL INPUT  
You will need to activate the recorder’s digital out-  
put. (See “Audio” on page 22-23).  
Amplifier (Receiver)  
2
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD Recorder  
(MPEG 2, Dolby Digital and DTS). Check the receiver  
manual and the logos on the front of the receiver.  
Caution:  
Due to the DTS Licensing agreement, the digital output  
will be in DTS digital out when DTS audio stream is  
selected.  
otes  
If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will  
produce a strong, distorted sound or no sound at all.  
– Six Channel Digital Surround Sound via digital con-  
nection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the on-  
screen display, press AUDIO.  
– This recorder does not perform internal (2 channel)  
decoding of a DTS sound track. To enjoy DTS  
multi channel surround, you must connect this  
recorder to a DTS compatible receiver via one of this  
recorder’s digital audio outputs.  
16  
Connections (Continued)  
Accessory Audio/Video (A/V)  
Connections to DVD Recorder  
Connect the input jacks (AV3, AV4) on the DVD  
Recorder to the audio/video out jacks on your accesso-  
ry component, using audio/video cables.  
Connecting a Digital Camcorder  
Using the front panel DV IN jack, it is possible to  
connect a DV digital camcorder or video deck or  
DVD-R/RW recorder and digitally transfer DV tapes or  
DVD-R/RW discs to DVD-R/RW.  
Use a DV cable (not supplied) to connect the DV in/out  
jack of your DV camcorder/video deck to the front panel  
DV IN jack of this recorder.  
ote  
If you use the S-VIDEO IN jack on the front panel, the  
VIDEO OUT jack on the front panel is not available.  
ote  
This jack is for connection to DV equipment only. It is  
not compatible with digital satellite tuners or D-VHS  
video decks.  
Jack panel of Accessory Component  
(VCR, Camcorder, etc.)  
S-VIDEO  
OUTPUT  
AUDIO  
OUTPUT  
DV Digital Camcorder  
R
OR  
DV  
IN/OUT  
L
VIDEO  
OUTPUT  
OR  
Rear of  
Front of  
DVD Recorder  
DVD Recorder  
Front of DVD Recorder  
17  
Before Operation  
Initial Settings  
General  
In this menu system, there are several ways to cus-  
tomize the settings provided. Most menus consist of  
three levels to set up the options, but some require  
greater depth for the variety of settings. If you press  
SETUP, only the first and second level of the menu sys-  
tem will appear on the TV screen. The third level can be  
displayed by pressing B. For navigating the menu lev-  
els, you will see “B” on the right side of the menu label  
to help you go to the next level.  
Auto Programming  
This DVD Recorder is equipped with a frequency  
synthesized tuner capable of receiving up to 88 TV  
channels.  
Preparation:  
Connect the DVD Recorder to the desired type of aerial, as  
shown in Connecting to the Aerial on page 15.  
Stop  
Auto Programming  
Program Edit  
Clock Set  
To bring up and exit the Menu:  
Press SETUP to bring up the menu. A second press of  
Searching  
11%  
TV Aspect  
SETUP will take you back to initial screen.  
Display Mode  
PBC  
Factory Set  
To go to the next level:  
Press B on the remote control.  
To go back to the previous level:  
Press b on the remote control.  
Press SETUP.  
The Setup menu appears.  
1
2 Use v / V to select the General option.  
General Operation  
Press SETUP.  
The Setup menu appears.  
While the General option is selected, press B to  
1
3
4
5
6
7
move to the second level.  
2 Use v / V to select the desired option.  
Use v / V to select the Auto Programming  
option.  
While the desired item is selected, press B to  
Press B to move to the third level.  
Country option is highlighted.  
3
move to the second level.  
4 Use v / V to select the second desired option.  
Use v / V to select a country then press B.  
“Start” icon is highlighted.  
5 Press B to move to the third level.  
Press ENTER to begin the channel search.  
The tuner will automatically cycle through all  
available channels in the area and place them in  
the tuner’s memory.  
Use v / V to select the desired setting then  
6
press ENTER to confirm your selection.  
Some items require additional steps.  
Press SETUP to exit the Setup menu.  
7
18  
Before Operation (Continued)  
Program Edit  
Program Edit  
You can perform a search to select and store TV chan-  
nels manually.  
You can edit a channel manually (add, delete, name,  
move, etc.).  
1. Use v / V to select a program on the Program List  
menu then press ENTER.  
Auto Programming  
Program Edit  
Clock Set  
Edit  
Program List options appears on the left side of the  
Program List menu.  
TV Aspect  
Display Mode  
PBC  
2. Use v / V to select ‘Program Edit’ option from the  
options then press ENTER.  
Factory Set  
Program Edit menu appears.  
PR  
07  
Seek  
Ch.  
C 7  
MFT  
0
Press SETUP.  
The Setup menu appears.  
1
OK  
2 Use v / V to select the General option.  
While the General option is selected, press B to  
3. See the descriptions on below to use Program Edit  
menu.  
3
4
move to the second level.  
Use v / V to select the Program Edit option then  
press B to move to the third level.  
“Edit” icon is highlighted.  
b / B (left/right): Moves the cursor to the previous or  
next column.  
v / V (up/down): Changes the setting at the current  
cursor position.  
Press ENTER.  
Program List menu appears.  
5
PR: Indicates program number (display only)  
PR  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
Ch.  
C 12  
C 23  
C 7  
MFT  
+10  
0
Station  
AAA  
Seek: Searches a station automatically. Use  
b / B to select Seek option then press v / V.  
Searching stops when the DVD recorder tunes in a  
station.  
BBB  
0
CCC  
C 27  
C 17  
C 33  
C 34  
C 47  
C 10  
-10  
0
DDD  
Decoder NICAM  
PR-01  
0
+20  
0
Ch.: Changes the channel number to edit. Use b / B  
to select Ch. option then press v / V.  
-60  
MFT: Changes the frequency for fine tuning.  
Use b / B to select MFT option then press v / V.  
Select  
Move  
Page Up/Down  
Close  
4. Choose OK then press ENTER to confirm the setting  
and returns to the Program List menu.  
Use v / V to select a PR number then press  
ENTER.  
Program List options appears on the left side of the  
6
7
menu display.  
Use v / V to select an option then press ENTER  
to confirm.  
Program Edit  
Station Rename  
Move  
Program Edit: Edits the select-  
ed program.  
Station Rename: Edits the sta-  
Delete  
tion name.  
NICAM Auto/Off  
Move: Moves the program’s  
location on the program list.  
Delete: Deletes the program  
from program list.  
NICAM Auto/Off: Set the  
NICAM function to for the pro-  
gram Auto or Off.  
Press RETURN (O) repeatedly to exit Program  
List menu.  
8
19  
Before Operation (Continued)  
Sort TV channels manually  
Program Edit (Continued)  
You can sort the program’s position on the Program List  
menu.  
Station Rename  
You can name stations independently. Names can be  
up to 5 characters long.  
1. Use v / V to select a program on the Program List  
menu then press ENTER.  
Program List options appears on the left side of the  
Program List menu.  
1. Use v / V to select a program on the Program List  
menu then press ENTER.  
Program List options appears on the left side of the  
Program List menu.  
2. Use v / V to select ‘Move’ option from Program List  
options then press ENTER.  
2. Use v / V to select ‘Station Rename’ option from  
Program List options then press ENTER.  
Keyboard menu appears.  
3. Use v / V to select a desired position then press  
ENTER to store.  
Deleting a program  
ABC  
6 (1.6)  
Alphabet Capital  
You can delete a program on the Program List menu.  
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
1. Use v / V to select a program on the Program List  
menu then press ENTER.  
G
Q
M
W
S
Program List options appears on the left side of the  
Program List menu.  
OK  
Cancel Space Delete  
2. Use v / V to select ‘Delete’ option from Program List  
options then press ENTER. The Program is deleted.  
3. Enter a name for the station. Use v V b B to select  
a character then press ENTER to confirm your selec-  
tion.  
Setting the NICAM Auto/Off  
This DVD recorder can receive Hi-Fi sound transmis-  
sions in NICAM Stereo. However, if sound distortion  
occurs, due to poor reception, you can switch Off  
1. Use v / V to select a program on the Program List  
menu then press ENTER.  
Alphabet Capital: Switches the keyboard upper  
case characters.  
Alphabet Small: Switches the keyboard to lower  
case characters.  
Symbols: Switches the keyboard to symbol char-  
acters.  
OK: Select to finish.  
Cancel: Select to exit the menu.  
Space: Inserts a space at the cursor position.  
Delete: Deletes the previous character at the  
cursor position.  
Program List options appears on the left side of the  
Program List menu.  
2. Use v / V to select ‘NICAM Auto/Off’ option from  
Program List options then press ENTER. If you  
select Auto, ‘NICAM’ appears on the menu screen.  
b / B: Moves cursor to left or right.  
Remote control buttons for entering a name  
N (PLAY): Inserts a space at the cursor position.  
X (PAUSE/STEP): Deletes the after character at the  
cursor position.  
x (STOP), CLEAR: Deletes the previous character  
at the cursor position.  
. / >: Moves cursor to left or right.  
Numbers (0~9): Enters the character of correspon-  
ding location on the selected column.  
MENU/LIST, DISPLAY: Switches the keyboard type  
(Alphabet Capital, Alphabet Small, Symbols)  
4. Choose ‘OK’ icon then press ENTER to fix the name  
and returns to the Program List menu.  
20  
Before Operation (Continued)  
Clock Set  
Display Mode  
Press SETUP.  
The Setup menu appears.  
Display Mode setting works only when the TV Aspect  
ratio is set to “4:3”.  
1
You can choose:  
2 Use v / V to select the General menu.  
-
Letter Box: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Pan Scan: Automatically displays the wide picture on  
the entire screen and cuts off the portions  
that do not fit.  
While the General option is selected, press B to  
-
3
move to the second level.  
4 Use v / V to select the Clock Set option.  
5 Press B to move to the third level.  
Auto Programming  
Program Edit  
Clock Set  
Auto Programming  
Program Edit  
TV Aspect  
Display Mode  
PBC  
Letter Box  
Pan Scan  
Clock Set  
Manual  
TV Aspect  
Display Mode  
Factory Set  
Date - -  
/
- -  
- -  
PBC  
Year  
Time  
- - - -  
- -  
Factory Set  
:
PBC  
The PBC setting can be changed. Set Playback Control  
(PBC) to ON or OFF.  
- ON: Video CDs with PBC are played according to the  
PBC.  
- OFF: Video CDs with PBC are played the same way as  
Audio CDs.  
Enter the necessary information for date and  
time.  
b / B (left/right): Moves the cursor to the previous  
or next column.  
v / V (up/down): Changes the setting at the current  
cursor position.  
6
7
Press ENTER to confirm your setting, then  
press SETUP to exit the Setup menu.  
Auto Programming  
Program Edit  
Clock Set  
TV Aspect  
TV Aspect  
Display Mode  
PBC  
OFF  
ON  
You can choose:  
Factory Set  
- 4:3: Select when a standard 4:3 TV is connected.  
- 16:9: Select when a 16:9 wide TV is connected.  
Auto Programming  
Factory Set  
Program Edit  
Clock Set  
If you need to, you can reset the recorder to all its facto-  
ry settings. Select ‘SET’ icon then press ENTER.  
TV Aspect  
4:3  
Display Mode  
16:9  
PBC  
Factory Set  
ote  
Some options can not be reset. (Rating, Password, and  
Country Code)  
Auto Programming  
Program Edit  
Clock Set  
TV Aspect  
Display Mode  
PBC  
SET  
Factory Set  
21  
Before Operation (Continued)  
Language  
Audio  
Each DVD disc has a variety of audio output options.  
Set the recorder’s Audio Output according to the type of  
audio system you use.  
Display Language  
Select a language for the Setup menu and on-screen  
display.  
Dolby Digital  
PCM: Select when connected to a 2-channel digital stereo  
amplifier. The DVD Recorder’s digital audio outputs sounds  
in the PCM 2ch format when you play a DVD video disc  
recorded on the Dolby Digital recording system.  
Bitstream: Select “Bitstream” if you connected the DVD  
Recorder’s DIGITAL OUT jack to a Dolby Digital  
decoder (or an amplifier or other equipment with a  
Dolby Digital decoder).  
Dolby Digital  
PCM  
Disc Language  
DTS  
Bitstream  
Select a language for the disc’s Menu, Audio, and Subtitle.  
- Original: The original language set for the disc is  
selected.  
MPEG  
Sampling Freq.  
DRC  
Vocal  
- Other: To select another language, select Other  
option then press ENTER. Use the numbered  
and ENTER buttons to key-in the correspon-  
ding 4-digit number according to the lan-  
guage code list on page 56. If you a mistake  
before pressing ENTER, press b repeatedly  
to delete one by one and correct it.  
DTS  
OFF: If you select “OFF”, the DTS signal is not output  
through the DIGITAL OUT jack.  
Bitstream: Select “Bitstream” if you connected the DVD  
Recorder’s DIGITAL OUT jack to a DTS decoder (or an  
amplifier or other equipment with a DTS decoder).  
Display Menu  
Original  
English  
Spanish  
Disc Menu  
Disc Audio  
Disc Subtitle  
French  
German  
Italian  
Portuguese  
Dutch  
Dolby Digital  
DTS  
OFF  
Other  
- - - -  
MPEG  
Bitstream  
Sampling Freq.  
DRC  
Vocal  
22  
Before Operation (Continued)  
MPEG  
DRC (Dynamic Range Control)  
PCM: Select when connected to a 2-channel digital  
stereo amplifier. The DVD Recorder’s digital audio out-  
puts sounds in the PCM 2ch format when you play a  
DVD video disc recorded on the MPEG2 recording  
system.  
Bitstream: Select “Bitstream” if you connected the DVD  
Recorder’s DIGITAL OUT jack to a MPEG decoder (or  
an amplifier or other equipment with a MPEG decoder).  
With the DVD format, you can hear a program’s sound-  
track in the most accurate and realistic presentation  
possible, thanks to digital audio technology. However,  
you may wish to compress the dynamic range of the  
audio output (the difference between the loudest sounds  
and the quietest ones). Then, you may listen to a movie  
at a lower volume without losing clarity of sound. Set  
DRC to ON for this effect.  
Dolby Digital  
Dolby Digital  
DTS  
DTS  
MPEG  
MPEG  
PCM  
Sampling Freq.  
Sampling Freq.  
DRC  
Bitstream  
DRC  
OFF  
ON  
Vocal  
Vocal  
Sampling Frequency  
Vocal  
If your receiver or amplifier is NOT capable of handling  
96 kHz signals, select 48 kHz. When this choice is  
made, this unit will automatically convert any 96 kHz  
signals to 48 kHz so your system can decode them.  
If your receiver or amplifier is capable of handling  
96 kHz signals, select 96 kHz. When this choice is  
made, this unit will pass each type of signal through  
without any further processing.  
Set Vocal to ON only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
Dolby Digital  
DTS  
MPEG  
Sampling Freq.  
DRC  
OFF  
ON  
Vocal  
Dolby Digital  
DTS  
MPEG  
Sampling Freq.  
DRC  
48KHz  
96KHz  
Vocal  
23  
Before Operation (Continued)  
Lock (Parental Control)  
If you forget your 4-digit code  
If you forget your password, to clear the current pass-  
word, follow the procedure below.  
Set Password  
1. Press SETUP to display the Setup menu.  
2. Use the Number buttons to enter the 6-digit number  
“210499”.  
3. Select “Yes” then press ENTER. The 4-digit pass-  
word is cleared. Enter a new code as shown left.  
Changing the 4-digit code  
Set Password  
Change  
Delete  
New Password  
Rating  
Country Code  
Rating  
Movies on DVDs may contain scenes not suitable for  
children. Therefore, discs may contain Parental Control  
information that applies to the complete disc or to  
certain scenes on the disc. These scenes are rated  
from Level 1 to 8, and alternatively, more suitable  
scenes are available for selection on some discs.  
Ratings are country-dependent. The Parental Control  
feature allows you to prevent discs from being played  
by your children or to have certain discs played with  
alternative scenes.  
Press SETUP.  
The Setup menu appears.  
1
2 Use v / V to select the Lock option.  
While the Lock option is selected, press B to  
3
move to the second level.  
Set Password  
4 Use v / V to select the Set Password option.  
Rating  
No Limit  
Country Code  
8 (Adult)  
5 Press B to move to the third level.  
7
6
5
When you have not entered a password yet;  
4
3
6
Enter a 4-digit password using the numbered but-  
2
tons to create a personal 4-digit security password,  
then press ENTER. Enter the 4-digit password again  
and press ENTER to verify.  
When you have already entered a password;  
Enter a 4-digit password using the numbered but-  
tons to confirm the personal 4-digit security pass-  
word, then press ENTER.  
1 (Kids)  
Follow steps 1-3 as shown above to the left (Set  
Password).  
1
2 Use v / V to select the Rating option.  
3 Press B to move to the third level.  
ip  
If you make a mistake before pressing ENTER, press b  
repeatedly to delete password numbers one by one  
then correct it.  
Follow step 6 as shown above to the left (Set  
4
Password).  
Select a rating from 1 to 8 using the v / V but-  
While Changeis selected, press ENTER.  
If you select “Delete” then press ENTER. The pass-  
word is deleted.  
5
tons. One (1) has the least playback restrictions.  
7
Eight (8) has the most playback restrictions.  
No Limit: If you select No Limit, Parental Control is  
not active. The disc will play in full.  
Enter a 4-digit password using the numbered  
Level 1 to 8: Some discs contain scenes not suit-  
able for children. If you set a rating for the recorder,  
all disc scenes with the same rating or lower will be  
played. Higher rated scenes will not be played  
unless an alternative scene is available on the disc.  
The alternative must have the same rating or a  
lower one. If no suitable alternative is found, play-  
back will stop. You must enter the 4-digit password  
or change the rating level in order to play the disc.  
8
buttons to create a personal 4-digit security  
password then press ENTER.  
Enter the 4-digit password again and press  
ENTER to verify.  
9
ip  
If you a mistake before pressing ENTER, press b  
repeatedly to delete password numbers one by one  
then correct it.  
Press ENTER to confirm your rating selection,  
6
then press SETUP to exit the menu.  
24  
Before Operation (Continued)  
Country Code  
Recording  
Enter the code of a country/area whose standards were  
used to rate the DVD video disc, referring to the list  
(See “Country Code List”, page 57.).  
Record Mode Set  
You can set the picture quality for recording; HQ (High  
Quality), SQ (Standard Quality), LQ (Low Quality), EQ  
(Extend Quality).  
Set Password  
Rating  
U
S
Country Code  
EQ  
LQ  
SQ  
HQ  
Rec Mode Set  
Rec Aspect  
DV Rec Audio  
TV Rec Audio  
Auto Chapter  
Press SETUP.  
The Setup menu appears.  
1
Press SETUP.  
The Setup menu appears.  
2 Use v / V to select the Lock option.  
1
2 Use v / V to select the Recording option.  
While the Lock option is selected, press B to  
3
move to the second level.  
While the Recording option is selected, press B  
4 Use v / V to select the Country Code option.  
3
to move to the second level.  
4 Use v / V to select the Rec Mode Set option.  
5 Press B to move to the third level.  
6
5 Press B to move to the third level.  
6
7
When you have not entered a password yet;  
Enter a 4-digit password using the numbered but-  
tons to create a personal 4-digit security password,  
then press ENTER. Enter the 4-digit password again  
and press ENTER to verify.  
When you have already entered a password;  
Enter a 4-digit password using the numbered but-  
tons to confirm the personal 4-digit security pass-  
word, then press ENTER.  
Use v / V to select a desired Record Mode  
(HQ, SQ, LQ or EQ)  
Press ENTER to confirm your selection, then  
press SETUP to exit the menu.  
Record Aspect  
When recording, you can set the recording aspect ratio  
to suit the material you’re recording (16:9 widescreen,  
or 4:3 standard).  
ip  
If you a mistake before pressing ENTER, press b  
repeatedly to delete password numbers one by one  
then correct it.  
Rec Mode Set  
Select the first character using the v / V  
buttons.  
Rec Aspect  
4:3  
DV Rec Audio  
TV Rec Audio  
Auto Chapter  
7
16:9  
Shift the cursor using B buttons and select the  
8
second character using v / V buttons.  
Press ENTER to confirm your country code  
9
selection, then press SETUP to exit the menu.  
25  
Before Operation (Continued)  
DV Rec Audio  
Disc  
You need to set this if you have a camcorder using  
32kHz/12-bit sound connected to the front panel DV IN  
jack.  
Some digital camcorders have two stereo tracks for  
audio. One is recorded at the time of shooting; the other  
is for overdubbing after shooting.  
On the Audio 1 setting, the sound that was recorded  
while shooting is used.  
On the Audio 2 setting, the overdubbed sound is used.  
Disc Format  
If you load a completely blank disc, the recorder will ini-  
tialize the disc.  
DVD-R: The recorder initialize the disc to Video mode.  
The recording mode will always be Video mode.  
DVD-RW: The recorder initialize the disc to VR mode.  
DVD+R: The Initialize menu will appears. Select “Yes”  
then press ENTER.  
DVD+RW: The recorder initialize the disc to DVD+RW  
mode.  
Also, you can format the disc from the Setup menu as  
below.  
Rec Mode Set  
Rec Aspect  
DV Rec Audio  
TV Rec Audio  
Auto Chapter  
Audio 1  
Audio 2  
Start  
Disc Format  
Finalize  
Disc Label  
Disc Protect  
TV Rec Audio  
When TV recording with bilingual, you can choose  
audio channel to record.  
Main+Sub: Main language and Sub language  
Main: Main language only  
Sub: Sub language only  
Press SETUP.  
The Setup menu appears.  
1
2 Use v / V to select the Disc option.  
Rec Mode Set  
While the Disc option is selected, press B to  
Rec Aspect  
DV Rec Audio  
3
move to the second level.  
Main+Sub  
Main  
TV Rec Audio  
Auto Chapter  
4 Use v / V to select the Disc Format option.  
Sub  
Press B to move to the third level.  
5
6
Start icon is highlighted.  
Press ENTER.  
Disc Format menu appears.  
In case of DVD-RW, use b / B to select a desired  
Auto Chapter  
7
Disc Format Mode (VR Mode or Video Mode)  
then press ENTER.  
In case of DVD+RW, go to step 8.  
When recording, chapter markers are put in specified  
setting. You can change this interval to 5 minutes,  
10 minutes, or 15 minutes. If you select None, switch off  
automatic chapter marking altogether with the No  
Separation setting.  
Disc Format  
Select a Mode  
VR Mode  
Video Mode  
Rec Mode Set  
Rec Aspect  
Use b / B to select Okthen press ENTER.  
It takes a few moments to format the disc.  
DV Rec Audio  
TV Rec Audio  
8
Auto Chapter  
None  
Disc Format  
5 Min  
All data on the disc will be deleted.  
Proceed?  
10 Min  
15 Min  
Ok  
Cancel  
Caution  
If you want to change the disc format, everything  
recorded on the disc will be erased.  
26  
Before Operation (Continued)  
Finalize  
Disc Label  
Finalizing ‘fixes’ the recordings in place so that the disc  
can be played on a regular DVD player or computer  
equipped with a suitable DVD-ROM drive.  
Finalizing a Video mode disc creates a menu screen for  
navigating the disc. This is accessed by pressing  
MENU/LIST or TITLE.  
Use this to enter a name for the disc. This name  
appears when you load the disc and when you display  
disc information on-screen.  
• The disc name can be up to 32 characters long.  
• For discs formatted on a different DVD Recorder, you  
will see only a limited character set.  
Disc Format  
Finalize  
Caution  
When DVD-R, DVD-RW, and DVD+R recording,  
youve finalized a disc recording, you cant edit or  
record anything else on that disc except  
DVD+RW. You can record and edit on this  
recorder after unfinalizing.  
Edit  
Disc Label  
Disc Protect  
Disc Format  
Finalize  
Finalize  
Follow steps 1-3 as shown Disc Format on page  
26.  
Disc Label  
Disc Protect  
Unfinalize  
1
2 Use v / V to select the Disc Label option.  
Press B to move to the third level.  
3
4
Edit icon is highlighted.  
Press ENTER.  
Keyboard menu appears.  
Follow steps 1-3 as shown on page 26 (Disc  
Format).  
1
DVD-RW  
2 Use v / V to select the Finalize option.  
6 (1.6)  
Alphabet Capital  
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
Press B to move to the third level.  
G
Q
M
W
S
3
Finalize is highlighted.  
Press ENTER.  
4
Finalize menu appears.  
OK  
Cancel Space Delete  
Finalize  
Enter a name for the disc. Use v V b B to select  
a character then press ENTER to confirm your  
selection. Refer step 3 as shown on page 20  
(Station Rename).  
Do you want finalization?  
5
Ok  
Cancel  
Select Ok then press ENTER.  
The recorder starts finalizing the disc.  
Choose OK then press ENTER to fix the name  
and return to the Setup menu.  
5
6
7
ote  
Press SETUP to exit the menu.  
How long finalization takes depends on the type of disc,  
how much is recorded on the disc, and the number of  
titles on the disc. A disc recorded can take up to 8 min-  
utes or more to finalize.  
Disc Protect  
When recording in DVD+RW / +R disc or VR mode for-  
matted DVD-RW disc, set to ON to prevent accidental  
recording, editing or deleting of the disc loaded. If you  
need to unlock the disc to make edits, select OFF.  
ip  
If you load a DVD-RW or DVD+RW that has already  
been finalized, you can ‘unfinalize’ it by choosing  
Unfinalize from the Finalize menu. After doing this, you  
can edit and re-record onto the disc.  
Disc Format  
Finalize  
Disc Label  
OFF  
ON  
Disc Protect  
27  
Before Operation  
Displaying Disc Information on-screen  
You can display various information about the disc  
loaded on-screen.  
General Explanation of  
On-Screen Display  
This manual gives basic instructions for operating the  
DVD Recorder. Some DVDs require specific operation  
or allow only limited operation during playback. When  
Press DISPLAY repeatedly to display/change the  
information displayed on-screen.  
1
2
this occurs, the symbol  
appears on the TV screen,  
To remove the on-screen display, press  
DISPLAY repeatedly until it disappears.  
See the descriptions on next pages for detailed  
explanation during playing a disc.  
indicating that the operation is not permitted by the DVD  
Recorder or is not available on the disc.  
Displaying Information While Watching TV  
Temporary Feedback Field Icons  
During viewing the TV, press ENTER or DISPLAY to  
display/remove the information displayed  
on-screen.  
Resume play from this point  
Action prohibited or not available  
e.g., when DVD-RW in VR mode is inserted.  
otes  
Some discs may not provide all of the features on the  
on-screen display example shown on next pages.  
If no button is pressed for 20 seconds, the on-screen  
display disappears.  
Indicates channel number, station name, and  
audio signal (NICAM, STEREO, MONO)  
received by the tuner.  
Indicates the record mode,  
free space, and elapsed  
time progress bar.  
Indicates disc name  
and format.  
DVD-RW  
VR Mode  
PR-06  
N
STEREO  
SQ 1H 32M Free  
ABC  
28/8/2003 11:35  
Indicates current date and time.  
28  
Before Operation  
Displaying Disc Information on-screen (Continued)  
DVD  
Shows the elapsed playing time  
and total time.  
Shows the current  
Shows the Current  
mode.  
TITLE: 1/4  
title/chapter number  
and total number of  
titles/chapters.  
CHAPTER: 3/28  
0:06:32  
/
2:12:10  
Menu Options  
Function (Use v / V to select desired option)  
Selection Method  
Title Number  
Shows the current title number and total number of  
b
/
B
, or  
1/6  
4/26  
titles, and skips to the desired title number.  
Numbers, ENTER  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
chapters, and skips to the desired chapter number.  
b
/
B, or  
Numbers, ENTER  
Shows the elapsed playing time, and  
searches the point by the elapsed time directly.  
b
/
B,  
0:10:30  
Numbers, ENTER  
Audio language  
and Digital Audio  
Output mode  
Shows the current audio soundtrack language,  
encoding method, and channel number, and  
changes the setting.  
1.  
ENG  
b
b
/
/
B
B
D 5.1CH  
Subtitle language  
Shows the current subtitles language, and  
changes the setting.  
OFF  
ABC  
Angle  
Shows the current angle number and total number of  
1/3  
b
b
/
/
B
B
angles, and changes the angle number.  
Sound  
Shows the current sound mode, and  
changes the setting.  
3D SUR.  
Shows the elapsed playing time  
and total time.  
VCD  
Shows the current track  
number and total number  
of tracks, or shows PBC  
On mode.  
Shows the Current  
mode.  
TRACK : 1/17  
0:06:32  
/
1:00:00  
Menu Options  
Function (Use v / V to select desired option)  
Selection Method  
Track Number  
Shows the current track number and total number of tracks  
or PBC On mode, and skip to the desired track number.  
b
/
B, or  
1/4  
Numbers, ENTER  
Time  
Shows the elapsed playing time (Display only).  
0:10:30  
STEREO  
3D SUR.  
Audio Channel  
Sound  
Shows the audio channel, and  
changes the audio channel.  
b
b
/
/
B
B
Shows the current sound mode, and  
changes the setting.  
29  
Before Operation  
Displaying Disc Information on-screen (Continued)  
VR  
Shows the elapsed playing time  
and total time.  
Shows the title name,  
recording date,  
recording mode, etc.  
ORG: Original  
Shows the Current  
mode.  
TITLE  
20/08  
0:06:32  
/
2:12:10  
ORG SQ  
PList: Playlist  
Menu Options  
Function (Use v / V to select desired option)  
Selection Method  
Title Number  
Shows the current title number and total number of  
titles, and skips to the desired title number.  
b
/
B
, or  
1/6  
Numbers, ENTER  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
b
/
B
, or  
4/26  
chapters, and skips to the desired chapter number.  
Numbers, ENTER  
Shows the elapsed playing time, and  
searches the point by the elapsed time directly.  
b
/
B,  
0:10:30  
Numbers, ENTER  
Digital Audio  
Output mode  
Shows the current audio encoding method, and chan-  
D
2CH  
OFF  
b
b
/
/
B
B
nel number, and changes the setting.  
Subtitle language  
Shows the current subtitles language, and  
changes the setting.  
ABC  
Sound  
Shows the current sound mode, and  
changes the setting.  
3D SUR.  
b
/
B
Video  
+RW  
+R  
Shows the elapsed playing time  
and total time.  
Shows the title name,  
recording date,  
recording mode, etc.  
Shows the Current  
mode.  
TITLE
20/08
0:06:32  
/
2:12:10  
SQ  
Menu Options  
Function (Use v / V to select desired option)  
Selection Method  
Title Number  
Shows the current title number and total number of  
titles, and skips to the desired title number.  
b
/
B
, or  
1/6  
Numbers, ENTER  
Chapter Number  
Time search  
Shows the current chapter number and total number of  
b
/
B
, or  
4/26  
chapters, and skips to the desired chapter number.  
Numbers, ENTER  
Shows the elapsed playing time, and  
searches the point by the elapsed time directly.  
b
/
B,  
0:10:30  
Numbers, ENTER  
Digital Audio  
Output mode  
Shows the current audio encoding method, and chan-  
1. STEREO  
b
b
/
/
B
B
D
2CH  
nel number, and changes the setting.  
Subtitle language  
Shows the current subtitles language, and  
changes the setting.  
OFF  
ABC  
Angle  
(Video Mode only)  
Shows the current angle number and total number of  
1/1  
b
b
/
/
B
B
angles, and changes the angle number.  
Sound  
Shows the current sound mode, and  
changes the setting.  
3D SUR.  
30  
Operation with DVD and Video CD  
Playing a DVD or Video CD  
Playback Setup  
Turn the TV on and select the video input source con-  
nected to the DVD Recorder.  
Audio system: Turn the audio system on and select  
the input source connected to the DVD Recorder.  
1/6  
Moving to another TITLE  
DVD  
Video  
VR  
+RW  
+R  
When a disc has more than one title, you can move to  
another title as follows:  
Press DISPLAY then use v / V to select the title  
icon. Then, press the appropriate numbered button  
(0-9) or b / B to select a title number.  
Press OPEN/CLOSE (Z) to open the disc tray.  
Moving to another CHAPTER/TRACK  
1
4/26  
1/4  
Load your chosen disc in the tray, with the  
2
3
playback side down.  
DVD  
Video  
VR  
+RW  
+R  
VCD  
Press OPEN/CLOSE (Z) to close the tray.  
READING appears on the display window, and  
playback starts automatically. If playback does not  
start, press N (PLAY).  
In some cases, the disc menu might appear  
instead.  
When a title on a disc has more than one chapter/track,  
you can move to another chapter/track as follows:  
Press SKIP (. or >) briefly during playback to  
select the next chapter/track or to return to the begin-  
ning of the current chapter/track.  
Press SKIP (.) twice briefly to step back to the  
previous chapter/track.  
ip  
To go directly to any chapter/track during playback,  
press DISPLAY. Then, use v / V to select chapter  
icon (or for a Video CD, select track icon). Then, enter  
the chapter/track number using the numbered buttons  
(0-9) or press b / B.  
If a menu screen is displayed  
The menu screen may be displayed first after loading a  
DVD or Video CD which contains a menu.  
DVD  
Use the b B v V buttons to select the title/chapter you  
want to view, then press ENTER to start playback.  
Press TITLE or MENU/LIST to return to the menu  
screen.  
Search  
DVD  
Video  
VR  
+RW  
+R  
VCD  
1 Press SCAN (m or M) during playback.  
The recorder will now go into SEARCH mode.  
VCD  
2 Press SCAN (m or M) to select the required  
speed: b (Reverse play), mX2, mX4, mX8,  
mX16, mX100 (backward) or MX2, MX4,  
MX8, MX16, MX100 (forward).  
With a Video CD, the Search speed changes: mX2,  
mX4, mX8 (backward) or MX2, MX4, MX8  
(forward).  
Use the number buttons to select the track you want  
to view.  
Press RETURN (O) to return to the menu screen.  
Menu setting and the exact operating procedures for  
using the menu may differ depending on the disc.  
Follow the instructions on the each menu screen.  
You may also set PBC to OFF under Setup menu.  
See page 21.  
3 To exit SEARCH mode, press N (PLAY).  
Still Picture and Frame-by-Frame Playback  
otes  
DVD  
Video  
VR  
+RW  
+R  
VCD  
– If Parental Control is set and the disc is not within the  
Rating settings (not authorized), the 4-digit code must  
be entered and/or the disc must be authorized (see  
“Rating”, on page 24).  
1 Press PAUSE/STEP (X) during playback.  
The recorder will now go into PAUSE mode.  
2 You can advance or back up the picture frame-by-  
frame by pressing b / B repeatedly during PAUSE  
mode.  
– DVDs may have a Region Code.  
Your recorder will not play discs that have a region  
code different from your recorder. The region code for  
this recorder is 4 (four).  
3 To exit PAUSE mode, press N (PLAY).  
ote  
General Features  
The picture frame-by-frame in reverse is not available  
for Video CD.  
ote  
ip  
Unless stated otherwise, all operations described use  
the remote control. Some features may also be avail-  
able on the Setup menu.  
You can advance the picture frame-by-frame by press-  
ing PAUSE/STEP (X) repeatedly on the remote control.  
31  
Operation with DVD and Video CD (Continued)  
Video CDs - Repeat Track/All/Off  
Press REPEAT to select a desired repeat mode.  
General Features (Continued)  
Track:  
All:  
OFF:  
repeats the current track.  
repeats the all tracks on the disc.  
does not play repeatedly.  
Slow Motion  
DVD  
Video  
VR  
+RW  
+R  
VCD  
1 Press PAUSE/STEP (X) during playback.  
The recorder will now go into PAUSE mode.  
ote  
On a Video CD with PBC, you must set PBC to OFF in  
the Setup menu to use the Repeat function. See page  
21.  
2 Press SCAN (m or M) during PAUSE mode.  
The DVD Recorder will enter SLOW mode.  
3 Use the SCAN (m or M) to select the required  
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (back-  
ward), or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).  
With a Video CD, the Slow speed changes: T 1/8,  
T 1/4 or T 1/2 (forward).  
A - B  
Repeat A-B  
DVD  
Video  
VR  
+RW  
+R  
VCD  
To repeat a sequence in a title:  
4 To exit Slow Motion mode, press N (PLAY).  
1 Press A-B at your chosen starting point.  
Repeat icon and ‘A-’ appears on the TV screen.  
ote  
2 Press A-B again at your chosen end point.  
Repeat icon and ‘A-B’ appears on the TV screen, and the  
repeat sequence begins.  
Slow motion playback in reverse is not possible with  
Video CDs.  
3 To cancel the sequence, press A-B repeatedly to  
select OFF.  
Random Karaoke DVD  
VCD  
1 Press RANDOM during playback.  
The unit automatically begins Random Playback and  
“RANDOM” appears on the TV screen.  
0:10:30  
Time Search  
DVD  
Video  
VR  
+RW  
+R  
2 To return to normal playback, press RANDOM until  
“NORMAL” appears on the TV screen.  
The Time Search function allows you to start playing at  
any chosen time on the disc.  
ip  
1 Press DISPLAY twice during playback. The on-screen  
display appears on the TV screen.  
The Time Search box shows the elapsed playing time of the  
current disc.  
By pressing SKIP > during Random playback, the  
unit selects another title (track) and resumes Random  
playback.  
2 Within 20 seconds, use v / V to select the Time  
Search icon in the on-screen display.  
ote  
The “0:00:00” appears in the Time Search box.  
This function only works with DVD Karaoke discs or  
video CDs without PBC.  
3 Within 20 seconds, use the number buttons to enter  
the required start time. Enter hours, minutes, and sec-  
onds from left to right in the box.  
On a Video CD with PBC, you must set PBC to OFF  
in the Setup menu to use the Random function. See  
page 21.  
You can not enter an invalid time.  
If you enter the wrong numbers, press b B to move the  
/
under bar (_) to the wrong number. Then enter the correct  
numbers.  
Chapter  
Repeat  
DVD  
Video  
VR  
+RW  
+R  
VCD  
4 Within 20 seconds, press ENTER to confirm the start  
time.  
Playback starts from the selected time on the disc.  
DVD Discs - Repeat Chapter/Title/All/Off  
Press REPEAT to select a desired repeat mode.  
Chapter: repeats the current chapter.  
Title:  
repeats the current title .  
All:  
repeats the all titles on the disc.  
(VR mode DVD-RW disc only)  
does not play repeatedly.  
OFF:  
32  
Operation with DVD and Video CD (Continued)  
3 Press CLEAR.  
General Features (continued)  
“Delete selected marker? Proceed?” message appears.  
4 Use b / B to select “Yes” then press ENTER.  
Zoom  
DVD  
5 Repeat steps 2-4 to erase additional Marked scene.  
Video  
VR  
+RW  
+R  
VCD  
6 To remove the Marker Search menu, press  
The Zoom function allows you to enlarge the video  
image and to move through the enlarged image.  
RETURN (O).  
1 Press ZOOM during playback or still playback to acti-  
vate the Zoom function.  
Each press of the ZOOM button changes the TV screen in  
the sequence shown below.  
x1 size x2 size x4 size x1 size (normal size)  
Checking the Contents of DVD Video  
Discs: Menus  
DVDs may contain menus that allow you to access  
special features. To open the disc menu, press  
MENU/LIST. Then, press the appropriate number button  
to select an option. Or, use the b B v V buttons to  
highlight your selection, then press ENTER.  
2 Use the b B v V buttons to move through the  
zoomed picture.  
3 To resume normal playback, press CLEAR or press  
ZOOM repeatedly until the normal picture appears.  
DVD  
Title Menu  
ote  
1 Press TITLE.  
The zoom function may not work for some DVDs.  
If the current title has a menu, the menu will appear on the  
TV screen. Otherwise, the disc menu may appear.  
1/6  
2 The menu may contain camera angles, spoken lan-  
guage and subtitle options, and chapters for the title.  
Marker Search  
DVD  
Video  
VR  
+RW  
+R  
VCD  
You can start playback from a memorized point. Up to  
six points can be memorized.  
DVD  
Disc Menu  
To enter a mark, follow these steps.  
1 Press MENU/LIST.  
The disc menu is displayed.  
1 During disc playback, press MARKER when  
playback reaches the spot that you want to  
memorize.  
2 To remove the disc menu, press MENU/LIST again.  
The Marker icon will appear on the TV screen briefly.  
DVD  
1/3  
Camera Angle  
2 Repeat step 1 to enter up to six Marker points on a  
If the disc contains scenes recorded at different camera  
angles, you can change to a different camera angle  
during playback.  
disc.  
To Recall a Marked Scene  
Press ANGLE then press b / B repeatedly during  
playback to select a desired angle.  
1 During disc playback, press SEARCH.  
The Marker Search menu will appear on the TV screen.  
2 Use the b B v V buttons to select a Marked scene  
that you want to recall.  
3 Press ENTER.  
Playback will start from the Marked scene.  
4 To remove the Marker Search menu, press  
The number of the current angle appears on the TV screen.  
ip  
The ANGLE indicator will blink on the TV screen at scenes  
recorded at different angles to indicate that angle switching is  
possible.  
RETURN (O).  
Changing the Audio Soundtrack  
Marker Search  
1.  
ENG  
DVD  
D 5.1CH  
Press AUDIO then press b / B repeatedly during play-  
back to hear a different audio language or audio sound-  
track if available.  
Move  
Select  
CLEAR Delete  
Close  
ote  
Some discs feature both Dolby Digital and DTS sound-  
tracks. There is no analog audio output when DTS is  
selected. To listen to the DTS soundtrack, connect this  
recorder to a DTS decoder via one of the digital out-  
puts. See page 16 for connection details.  
To clear a Marked Scene  
1 Press SEARCH during playback or in stop mode.  
The Marker Search menu will appear on the TV screen.  
2 Use b B v V to select the Marked scene that you  
want to erase.  
33  
Operation with DVD and Video CD (Continued)  
Changing the Audio Channel  
Last Condition Memory  
DVD  
Video  
VR  
+RW  
+R  
STEREO  
This recorder memorizes the user settings for the last  
disc that you have viewed. Settings remain in memory  
even if you remove the disc from the recorder or switch  
off the recorder. If you load a disc that had its settings  
memorized, the latest stop position is automatically  
recalled.  
VCD  
Video  
VR  
+RW  
+R  
With a Video CD, press AUDIO then press b / B  
repeatedly during playback to hear a different audio  
channel (STEREO, LEFT or RIGHT).  
With DVD-RW discs recorded in VR mode that have  
both a main and a Bilingual audio channel, you can  
switch between Main (L), Bilingual (R), or a mix of both  
(Main + Bilingual) by pressing AUDIO.  
otes  
– Settings are stored in memory for use any time.  
– This recorder does not memorize settings of a disc if  
you switch off the recorder before commencing to  
play it.  
3D SUR.  
3D Surround  
DVD  
Video  
VR  
+RW  
+R  
VCD  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
PIP (Picture in Picture)  
DVD  
Video  
VR  
VCD  
+RW  
+R  
This function enables you to view the stored stations in  
sub picture during playback.  
1 Press 3D SURR. then press b / B repeatedly during  
playback to select “3D SUR.”.  
2 To turn off the 3D Surround effect, select “NORMAL”.  
OFF  
ABC  
Subtitles  
DVD  
Video  
VR  
+RW  
+R  
Press SUBTITLE then press b / B repeatedly during  
playback to see the different subtitle languages.  
Instant Skip  
DVD  
Video  
VR  
+RW  
+R  
On and off  
Each press INSTANT SKIP skips forward 15 seconds.  
Press PIP to switch on the sub picture, press this but-  
ton again to switch it off.  
ote  
Input mode selection for sub picture  
If  
appears, the feature is not available on the disc.  
Press AV to select the input mode for the sub picture.  
Each time this button is pressed, each input mode for  
the sub picture is displayed as shown below.  
Finding Locations on a Disc VCD  
You can directly access any point on a video CD using  
this function. Use this function only while a video CD is  
playing. Playback jumps to the point specified.  
Tuner  
AV1  
AV2  
Program selection for sub picture  
Use v / V to change the program when sub picture’s  
input is set to tuner. The selected program number is  
displayed on the TV screen. You can view the select-  
ed program by pressing STOP (x).  
1 Press SEARCH during playback.  
The progress bar appears on the TV screen.  
PBC  
33%  
33%  
Sub picture position change  
TRK 1  
Press b / B repeatedly until desired position is  
achieved. The sub picture moves clockwise or  
counterclockwise.  
2 Use b / B to find a start position for playback.  
3 Press ENTER to confirm the selected position.  
Playback starts from the selected position.  
Zoom Sub picture  
Press ZOOM repeatedly to enlarge the sub picture,  
the magnification level increases up to three steps.  
ote  
This function works only when no marker is memorized.  
34  
Audio CD and MP3 Operation  
Playing an Audio CD or MP3 Disc  
Music menu options  
CD  
MP3  
1. To display menu options, select a tack (or folder) on  
the menu then press ENTER.  
2. Use v / V to select an option then press ENTER to  
confirm your selection.  
The DVD Recorder can play audio CDs. Also, the DVD  
Recorder can play MP3 formatted recordings on  
CD-ROM, CD-R or CD-RW disc.  
Before playing MP3 recordings, read the notes on MP3  
Recordings on page 36.  
CD  
Music-Audio CD menu options  
Play: Starts playback the selected  
track.  
Play  
Insert a disc and close the tray.  
AUDIO CD or MP3 CD menu appears on the TV  
screen.  
1
Program Add  
Program Add: Adds the track(s) to  
Program List. (page 37)  
Music  
MP3 CD  
Music  
- Audio CD  
-
152 Items  
Title  
Duration  
04:47  
04:01  
03:01  
03:30  
04:24  
05:01  
03:48  
04:09  
05:10  
04:11  
FOLDER 01  
FILE 1.mp3  
FILE 2.mp3  
FILE 3.mp3  
FILE 4.mp3  
FILE 5.mp3  
FILE 6.mp3  
FILE 7.mp3  
FILE 8.mp3  
FILE 9.mp3  
FILE 10.mp3  
TRACK 1  
TRACK 2  
TRACK 3  
TRACK 4  
TRACK 5  
TRACK 6  
TRACK 7  
TRACK 8  
TRACK 9  
TRACK 10  
MP3  
Music-MP3 CD menu options  
00:00  
0:52:16  
When you select a track.  
Play: Starts playback the selected  
track.  
Select MARKER Mark LIST Program  
Close  
Select MARKER Mark LIST Program  
Close  
Play  
AUDIO CD Menu  
MP3 CD Menu  
Program Add  
Folder  
Program Add: Adds the track(s) to  
Program List. (page 37)  
Use v / V to select a track then press  
N (PLAY).  
Folder: Displays the folder list on  
the disc.  
View All  
2
Playback starts.  
View All: Displays all MP3 files on  
the disc.  
During playback, the current track’s elapsed playing  
time will appear on the display window and menu.  
Playback will stop at the end of the disc.  
When you select a folder.  
ips  
Open: Displays sub-folders and  
MP3 files only in the folder.  
Open  
You can view TV channel or video input source  
by pressing AV. If you want to return to the Music  
menu, press MENU/LIST.  
Program Add  
Folder  
Program Add: Adds all track(s) in  
the folder to Program List. (page 37)  
You can switch between the Track List and  
Program List menus by pressing MENU/LIST.  
On the Music-MP3 CD menu, press SCAN (m  
or M) to move to the previous or next page.  
On CDs with mixed content (audio tracks, MP3  
files and JPEG files), you can select among the  
Music-Audio CD menu, Music-MP3 CD menu,  
and Photo CD menu by pressing TITLE repeated-  
ly.  
Folder: Displays the folder list on  
the disc.  
View All  
View All: Displays all MP3 files on  
the disc.  
To stop playback at any other time, press  
STOP (x).  
3
35  
Audio CD and MP3 Operation (Continued)  
CD  
MP3  
CD  
Pause  
Search  
1 Press PAUSE/STEP (X) during playback.  
1 Press SCAN (m or M) during playback.  
The recorder will now go into SEARCH mode.  
2 To return to playback, press N (PLAY) or press  
PAUSE/STEP (X) again.  
2 Press SCAN (m or M) to select the required  
speed: mX2, mX4, mX8 (backward) or MX2,  
CD  
MP3  
MX4, MX8 (forward).  
Search speed and direction are indicated on the menu  
screen.  
Moving to Another Track  
Press SKIP . or > briefly during  
playback to go to the next track or to return to the  
3 To exit SEARCH mode, press N (PLAY).  
beginning of the current track.  
Press SKIP . twice briefly to step back to the pre-  
vious track.  
CD  
Repeat A-B  
On an Audio CD, to go directly to any track, enter the  
track number using the numbered buttons (0-9) dur-  
ing playback on the Track List.  
To repeat a sequence in a track:  
1 Press A-B at your chosen start point.  
Repeat icon and ‘A’ appears on the menu screen.  
2 Press A-B again at your chosen end point.  
The Repeat icon and ‘A - B’ appears on the menu screen,  
and the repeat sequence begins.  
CD  
MP3  
Repeat Track/All(Folder)/Off  
Press REPEAT to select a desired repeat mode.  
TRACK: repeats the current track.  
ALL (CD): repeats the all tracks on the disc.  
FOLDER (MP3): repeats the all tracks in the current  
folder.  
3 To exit the sequence and return to normal play, press  
A-B again.  
The Repeat icon disappears from the menu screen.  
OFF (No display): does not play repeatedly.  
Notes on MP3 Recordings  
About MP3  
CD  
MP3  
Random  
An MP3 file is audio data compressed by using the  
MPEG1 audio layer-3 file-coding scheme. We call  
files that have the “.mp3” file extension “MP3 files”.  
The recorder can not read an MP3 file that has a file  
extension other than “.mp3”.  
1 Press RANDOM during playback or in stop mode.  
The unit automatically begins Random Playback and  
“RANDOM” appears on the menu screen.  
2 To return to normal playback, press RANDOM repeat-  
edly until “RANDOM” disappears from the menu  
screen.  
MP3 Disc compatibility with this recorder is  
limited as follows:  
1. CD-R physical format should be “ISO 9660” and  
“JOLIET”.  
ip  
By pressing SKIP > during Random playback, the  
unit selects another track and resumes Random play-  
back.  
2. If you record MP3 files using the software which  
cannot create a FILE SYSTEM, for example “Direct-  
CD” etc., it is impossible to playback MP3 files. We  
recommend that you use “Easy-CD Creator”, which  
creates an ISO9660 or JOLIET file system.  
3. Total number of files and folders on the disc should  
be less than 999.  
CD  
MP3  
3D Surround  
This unit can produce a 3D Surround effect, which  
simulates multi-channel audio playback from two  
conventional stereo speakers, instead of the five or  
more speakers normally required to listen to multi-  
channel audio from a home theater system.  
This DVD Recorder requires discs/recordings to meet  
certain technical standards in order to achieve optimal  
playback quality. Pre-recorded DVDs are automatically  
set to these standards. There are many different types  
of recordable disc formats (including CD-R containing  
MP3 files) that require certain pre-existing conditions  
(see above) to insure compatible playback.  
1
Press 3D SURR. during playback to select “3D SUR”.  
2 To turn off the 3D Surround effect, press 3D SURR.  
until “3D SUR” disappears from the menu screen.  
Changing the Audio Channel  
CD  
MP3  
Customers should also note that permission is  
required in order to download MP3 files and music  
from the Internet. Our company has no right to  
grant such permission. Permission should always  
be sought from the copyright owner.  
Press AUDIO repeatedly to hear a different audio chan-  
nel (stereo, left or right).  
36  
Programmed Playback with Audio CD and MP3  
The Program function enables you to store your favorite  
tracks from any disc in the recorder memory.  
Program can contain 99 tracks (Audio CD) or 256  
tracks (MP3).  
Play: Playback begins in the order  
in which you programmed the tracks  
from the selected track.  
Play  
Move  
Move: Moves the track(s) to change  
the program order.  
Insert an Audio CD or MP3 disc.  
Delete  
Audio CD or MP3 CD menu will appear.  
1
Delete All  
Delete: Deletes the track(s) from  
the Program List menu.  
2 Use v / V to select a track (or folder).  
Selecting multiple tracks (folders)  
1. Press MARKER.  
Delete All: Deletes all tracks from  
the Program List menu.  
A check mark appears on the track or folder. Press  
MARKER again to cancel the marked track or folder.  
Repeat Programmed Tracks  
Press REPEAT repeatedly during playback to select a  
desired repeat mode.  
2. Repeat step 1 to mark additional tracks (folders).  
TRACK: repeats the current track.  
ALL : repeats the all tracks on the Program list.  
OFF (No display): does not play repeatedly.  
Press ENTER.  
The options appear on the left side of the menu.  
3
Use v / V to select the Program Addoption  
Erasing a Track from the Program List  
1. Select the track you wish to erase from the Program  
List.  
4
5
6
then press ENTER.  
Repeat steps 2-4 to place additional tracks on  
the Program list.  
Press MENU/LIST to display Program List menu.  
You can switch between the Track List and Program  
List menus by pressing MENU/LIST.  
ip  
Use the MARKER button to select multiple tracks.  
2. Press ENTER.  
The menu options appear on the left side of the  
menu.  
Music  
MP3 CD  
Music  
- Audio CD  
Title  
Duration  
04:24  
04:01  
04:09  
03:30  
04:47  
04:11  
03:48  
05:01  
03:01  
05:10  
-
Program List  
FILE 20.mp3  
FILE 3.mp3  
FILE 9.mp3  
FILE 2.mp3  
FILE 14.mp3  
FILE 8.mp3  
FILE 5.mp3  
FILE 10.mp3  
FILE 13.mp3  
FILE 7.mp3  
152 Items  
TRACK 5  
TRACK 2  
TRACK 8  
TRACK 4  
TRACK 1  
TRACK 10  
TRACK 7  
TRACK 6  
TRACK 3  
TRACK 9  
3. Select ‘Delete’ option then press ENTER.  
00:00  
0:52:16  
The selected track is deleted from the Program List.  
ip  
Select MARKER Mark LIST Program  
Close  
Select MARKER Mark LIST Program  
Close  
Use “Delete All” option to delete all tracks.  
Use v / V to select the track you want to start  
playing on the Program List menu.  
7
Changing Track Order in the Program List  
1. Select the track you wish to move.  
ip  
On the Music-MP3 CD menu, press SCAN (m or  
M) to move to the previous or next page.  
ip  
Use the MARKER button to select multiple tracks.  
2. Press ENTER.  
Press N (PLAY).  
The menu options appear on the left side of the  
menu.  
8
Playback begins in the order in which you pro-  
grammed the tracks.  
Playback stops after playing the last programmed  
track on the Program List.  
3. Select ‘Move’ option then press ENTER.  
A yellow bar appears in the Program List.  
4. Use v / V to move the yellow bar to the desired  
location, then press ENTER.  
CD  
MP3  
The selected track is moved.  
Program List menu options  
1. To display menu options, select a tack on the  
Program List menu then press ENTER.  
The menu options appear on the left side of the  
menu.  
2. Use v / V to select an option then press ENTER to  
confirm your selection.  
MP3  
Save Your Program List  
This recorder automatically memorizes the user pro-  
gram list for the disc that you have programmed.  
Program list remains in memory even if you remove the  
disc from the recorder or switch the recorder off. If you  
load a disc that has its program list memorized, the pro-  
gram list is automatically recalled.  
37  
JPEG Disc Operation  
Viewing a JPEG Disc  
The recorder can play discs with JPEG files.  
Before playing JPEG recordings, read “Notes on JPEG  
Recordings” at right.  
To stop viewing at any time, press STOP.  
The Photo menu reappears.  
JPEG  
5
Skip Images  
While viewing a picture, press SKIP (. or >) once  
to advance to the next file or return to the previous file.  
Insert a disc and close the tray.  
1
The Photo menu appears on the TV screen.  
Rotate Images  
Use v / V while viewing a picture to flip the picture  
Photo  
clockwise or counterclockwise.  
Folder 02  
Folder 05  
JPEG  
Folder 01  
Folder 04  
View Slide Shows  
1. Select “Slide Show” option on the Photo menu.  
Folder 03  
2. Press ENTER.  
Folder 08  
Close  
Folder 06  
Select  
Folder 07  
The Slide Show menu appears.  
MARKER Mark  
Slide Show  
Use v V b B to select a folder, then press ENTER.  
A list of files in the selected folder appears.  
All  
Object  
Speed  
2
Normal  
JPEG  
Photo  
Start  
Cancel  
3. Use v V b B to set the options.  
Object: Selected file or All files.  
Speed: Sets the speed for Slide Show (Slow,  
Normal, or Fast)  
Select  
MARKER Mark  
Close  
4. Select the Start option then press ENTER to start the  
Slide Show.  
ote  
If the  
5. Press STOP to stop the Slide Show and returns to  
the Photo menu.  
icon displays in the Photo menu, it means you  
cannot see those JPEG files.  
ote  
Use v V b B to select a file, then press ENTER.  
The options appear on the left side of the menu.  
Use the MARKER button to select multiple files.  
3
Notes on JPEG Recordings  
ip  
If you are in a file list and want to return to the Folder  
list, use the v / V buttons on the remote to highlight  
Depending on the size and number of JPEG files, it  
may take several minutes for the recorder to read the  
disc’s content. If you don’t see an on-screen display  
after several minutes, some of the files are too big —  
reduce the resolution of the JPEG files to less than 4  
mega pixels and burn another disc.  
the  
icon and press ENTER.  
You can view TV channel or video input source by  
pressing AV. If you want to return to the Photo menu,  
press MENU/LIST.  
On the Photo menu, press SKIP (. or >) to  
move to the previous or next page.  
On CDs with mixed content (audio tracks, MP3 files  
and JPEG files), you can select among the AUDIO  
CD menu, MP3 CD menu, and Photo CD menu by  
pressing TITLE repeatedly in Stop mode.  
The total number of files and folders are free but the  
total number of files on the folder should be less than  
999.  
Some discs may be incompatible due to different  
recording formats or the condition of the discs.  
When you are using software such as “Easy CD  
Creator” to burn JPEG files on a CD-R, ensure that all  
selected files have the “.jpg” or “.jpeg” extension  
before copying them into the CD layout.  
Use v / V to select Full Viewoption then  
press ENTER.  
4
If the files have “.jpe” extensions, please rename  
them as “.jpg” or “.jpeg” files.  
File names without the “.jpg” or “.jpeg” extension  
cannot be read by this recorder, even though the files  
are shown as JPEG image files in Windows  
Explorer®.  
File 03.jpg  
4/20  
90  
90  
Stop  
Hide  
38  
Basic Recording  
To record one TV program while  
watching another  
Using the TV, select the channel to be viewed during  
recording.  
Basic Recording from a TV  
Follow the instructions below to record a TV program.  
Recording starts immediately and continues until the disc is full  
or you stop the recording.  
Switch on the recorder and load a recordable disc.  
Instant Timer Recording  
Instant Timer Recording allows you to make a recording  
easily of a preset length without using the program  
timer.  
Also make sure that the TV input is set to this recorder.  
1
If you load a completely blank disc, the recorder takes a  
short while to initialize the disc.  
Set a recording mode as necessary by pressing  
REC MODE repeatedly. (HQ, SQ, LQ, EQ)  
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,  
EQ: Extended Quality  
2
Follow steps 1-4 as shown left (Basic Recording  
from a TV).  
1
Use v / V buttons to select the TV channel to  
record.  
Press REC (z) repeatedly to select the record-  
3
2
ing time length.  
Recording starts after the first press. Each subse-  
quent press increases the recording time by 10  
minutes within free space.  
Changing TV Audio Channel  
You can select the audio channel (language) to listen by  
pressing AUDIO during viewing TV program. The cur-  
rent audio channel is displayed on-screen.  
Stereo or mono broadcat: Stereo Left Right  
Bilingual broadcat: Main+Sub Main Sub  
The recording time is displayed on the TV screen.  
At the end of the recording, the DVD Recorder will  
stop recording and shut off.  
• For TV recording with bilingual, set audio channel  
from the TV Rec Audio in sub-menu of the Setup  
menu (see page 26).  
Continue  
65Min Free  
• If the sound is of poor quality when set to Stereo, you  
can often improve it by changing to Mono (Left or  
Right).  
Instant Timer Record Menu  
Checking the Recording Time  
Press REC (z) once to check the recording time. The  
recalled setting will automatically return to the TV  
screen for a moment.  
Also, remaining time of recording is shown in the dis-  
play window.  
• This recorder can record either NICAM or regular  
audio. If the NICAM setting (page 20) is set to Auto,  
then if the broadcast is NICAM, the audio automati-  
cally changes to NICAM and you can record the  
NICAM audio. If the broadcast is non-NICAM, the reg-  
ular audio is always recorded.  
If NICAM sound distortion occurs, due to poor recep-  
tion, you can switch off NICAM setting of the program.  
To Extend the Recording Time  
The recording time can be extended anytime by press-  
ing REC (z).  
Press REC (z) once.  
4
Recording will start. (The REC indicator lights in the  
Each subsequent press increases the recording time by  
10 minutes within free space.  
display window.)  
Recording continues until you press STOP (x) or the  
disc is full.  
To record for a fixed length of time, see Instant Timer  
Recording on right.  
Caution  
If the recorder is unplugged (or there is a power failure)  
while the recorder is recording, the recording will be  
lost.  
5 Press STOP (x) to stop recording.  
To Pause the Recording  
1 Press PAUSE/STEP (X) to pause the disc during  
recording.  
2 When you want to continue recording, press  
PAUSE/STEP (X).  
39  
Timer Recording  
This DVD Recorder can be programmed to record up to  
7 programs within a period of 1 month. For unattended  
recording, the timer needs to know the channels to be  
recorded, the starting time and length.  
Checking Timer Recording Details  
Programming can be checked whenever the DVD  
Recorder is turned on. Press TIMER REC twice.  
• Use v / V to select a timer recording.  
Press TIMER REC.  
The Timer Record menu will appear.  
• Press ENTER to edit the selected program.  
Timer Record menu appears.  
1
• Press CLEAR to delete the selected program  
SQ  
Timer Record  
198Min Free  
from the Timer Record List.  
PR  
Date  
Start Time Length  
Mode  
SQ  
Repeat  
Once  
05  
9/5 Fr  
19:20  
- - - -  
Timer Record List  
PR  
Date  
Start Time  
Length Mode  
Check  
C50  
5
5
10/4 Sa  
10/6 Sa  
19:20  
19:20  
30M  
50M  
LQ  
HQ  
Rec. OK  
Rec. OK  
TIMER REC  
Enter  
Timer Rec List  
Close  
PR – Choose a memorized program number, or  
one of the external inputs from which to record.  
Date – Choose a date up to 1 month in advance.  
Start Time – Set the recording start time.  
Length – Set the recording length.  
CLEAR  
TIMER REC  
Edit  
Delete  
Timer Rec  
Close  
Canceling a Timer Recording  
Mode – Choose a record mode (HQ, SQ, LQ,  
EQ, or AT).  
AT (Auto) mode determines how much disc time  
is available and switches record mode, if neces-  
sary, to complete recording the program.  
You can clear a timer setting anytime before the record-  
ing actually starts.  
Use v / V to select a program you want to erase on  
the Timer Recorder List. If you want to erase the  
program, press CLEAR.  
Repeat – Choose a desired repeat (Once, Daily  
(Monday - Friday), or Weekly).  
Stopping a Timer Recording in Progress  
Enter the necessary information for your timer  
recording(s).  
b / B (left/right) – move the cursor left/right  
v / V (up/down) – change the setting at the cur-  
rent cursor position  
• Press RETURN (O) to exit the Timer Record  
menu.  
• Press ENTER after filling in all the program infor-  
mation.  
After a timer recording has started, you can still cancel  
the program.  
Press POWER.  
2
3
Timer Recording Troubleshooting  
Even though the timer is set, the recorder will not  
record when:  
• There is no disc loaded.  
• A non-recordable disc is loaded.  
• Disc Protect is set to ON in the Setup menu  
(see page 27).  
• Press TIMER REC to display Timer Record List.  
Press ENTER, the program will be memorized  
by the DVD Recorder.  
To check the programming, the Timer Record List  
• Power is turned on.  
• There are already 99 titles recorded on the disc.  
will appear.  
Check field’s “Rec. OK” on the Timer Record List  
indicates that the timer recording is programmed  
correctly and recordable disc inserted.  
You cannot enter a timer program when:  
• A recording is already underway.  
• The time you’re trying to set has already passed.  
• There are already 7 timer programs set.  
4 Press RETURN (O) to exit the Program List.  
If two or more timer programs overlap:  
• The earlier program takes priority.  
• When the earlier program finishes, the later program  
starts.  
• If two programs are set to start at exactly the same  
time, the program entered first takes priority.  
Make sure that you load a recordable disc and  
5
press POWER to switch your unit to Standby.  
otes  
• The timer indicator lights in the display window when  
the recorder is in standby with the timer active.  
• For TV recording with bilingual, set audio channel  
from the TV Rec Audio in sub-menu of the Setup  
menu (see page 26).  
If the disc is damaged, the recording may not complete  
successfully. In this case even though the Check field  
shows “Rec. OK”, it may not be.  
You must press POWER to stop the timer recording.  
40  
Recording from an External Input  
Recording from External Components  
Recording from a Digital Camcorder  
You can record from an external component, such as a  
camcorder or VCR, connected to any of the recorder’s  
external inputs.  
You can record from a digital camcorder connected to  
the DV IN jack on the front panel of this recorder. Using  
the recorder’s remote, you can control both the cam-  
corder and this recorder.  
Before recording, make sure that the audio input for the  
DV IN jack is set up (see page 26).  
Make sure that the component you want to  
1
record from is connected properly to the DVD  
Recorder. See page 17.  
Press AV repeatedly to select the external input  
to record from.  
• Tuner: Built-in tuner  
• AV1: AUDIO AV IN 1 / VIDEO IN 1 mounted on back  
panel  
ips  
2
• The source signal must be DVC-SD format.  
• Some camcorders cannot be controlled using this  
recorder’s remote.  
• AV2: INPUT 2 (VIDEO, AUDIO (L/R), S-VIDEO IN)  
mounted on front panel  
• DV: DV IN mounted on front panel  
If you connect a second DVD Recorder using a DV  
cable, you cannot control the second DVD from this one.  
You can’t control this unit remotely from a component  
connected to the DV IN jack.  
You can’t record date and time information from a DV  
cassette.  
3 Load a recordable disc.  
Select the recording mode as necessary by  
4
pressing REC MODE repeatedly.  
(HQ, SQ, LQ, EQ)  
HQ; High Quality, SQ; Standard Quality, LQ: Low Quality,  
EQ: Extended Quality  
Make sure your digital camcorder is connected  
to the front panel DV IN jack. See page 17.  
1
2
Check that the DV audio input is as you require.  
You can choose between Audio 1 (original audio) and  
Audio 2 (overdubbed audio).  
• DV Input is set from the DV Rec Audio in sub-menu of  
the Setup menu. See DV Rec Audio on page 26 for  
more information.  
Press REC (z) once.  
Recording will start. (The REC indicator lights in the  
display window.)  
Recording continues until you press STOP (x) or the  
disc is full.  
5
To record for a fixed length of time, see Instant Timer  
Recording on page 39.  
Press AV repeatedly to select the DV input.  
DV appears in the display window and on the TV screen.  
3
4
6 Press STOP (x) to stop recording.  
Find the place on the camcorder tape that you  
want to the recording to start from.  
For best results, pause playback at the point from which  
you want to record.  
• Depending on your camcorder, you can use this  
recorder’s remote to control the camcorder using the  
STOP, PLAY and PAUSE functions.  
ote  
If your source is copy-protected using CopyGuard, you will not  
be able to record it using this recorder. See Copyright on page  
9 for more details.  
5 Press REC (z) once to start recording.  
Recording is automatically stopped if the recorder  
detects no signal.  
You can pause or stop the recording by pressing  
PAUSE/STEP (X) or STOP (x). You cannot  
control the camcorder from this remote control  
during recording.  
• In Video mode, the final frame of the recording  
may remain displayed on screen for a while after  
recording stops.  
For timer recording to work properly on this  
recorder, the digital camcorder must also be  
switched on and in operating.  
41  
Recording from an External Input (Continued)  
DV-Related Messages  
What is DV?  
You may see the following messages appear on your  
TV screen when using the DV IN jack.  
Using DV, also known as i.LINK, you can connect a  
DV-equipped camcorder to this recorder using a single  
DV cable for input and output of audio, video, data and  
control signals.  
The i.LINK interface is also known as IEEE 1394-1995.  
“i.LINK” and the “i.LINK” logo are trademarks.  
• This recorder is only compatible with DV-format  
(DVC-SD) camcorders. Digital satellite tuners and  
Digital VHS video recorders are not compatible.  
You cannot connect more than one DV camcorder at  
a time to this recorder.  
Not connected to camcorder  
The camcorder is not connected properly, or the cam-  
corder is switched off.  
Too many devices connected  
The DV jack on this recorder supports connection to  
just one camcorder.  
Check the tape  
There is no cassette loaded into the connected equip-  
ment.  
You cannot control this recorder from external equip-  
ment connected via the DV IN jack (including two  
DVD recorders).  
• It may not always be possible to control the connect-  
ed camcorder via the DV IN jack.  
Uncontrollable device  
This recorder cannot control the camcorder.  
• Digital camcorders can usually record audio as stereo  
16-bit/48kHz, or twin stereo tracks of 12-bit/32kHz.  
This recorder can only record one stereo audio track.  
Set DV Rec Audio to Audio 1 or Audio 2 as required  
(see page 26).  
Updating Information  
Camcorder is updating information for DV.  
Camera mode  
Camcorder is set to camera mode.  
• Audio input to the DV IN jack should be 32 or 48kHz  
(not 44.1kHz).  
• Picture disturbance on the recording may occur if the  
source component pauses playback or plays an  
unrecorded section of tape, or if the power fails in the  
source component, or the DV cable becomes discon-  
nected.  
• Although DV Rec Audio is set to Audio 2 and Audio 2  
signal is not present, DV Rec Audio will be reset to  
Audio 1 automatically.  
Troubleshooting  
If you can’t get a picture and/or audio through the DV IN  
jack, check the bullet points:  
• Make sure the DV cable is properly connected.  
• Try switching off the connected equipment then  
switch back on.  
• Try switching the audio input.  
ote  
Depending on the connected camcorder, you may not  
be able to control it using the remote control supplied  
with this recorder.  
42  
Title List and Chapter List Menu  
VR  
Using the Title List-Original menu  
ip  
Press DISPLAY to display more detailed title information  
for selected title.  
The Title List-Original is where you build and edit your  
Playlist, and where you can delete titles and make other  
changes to the Original content of the disc. You can  
also play individual titles directly from the Title List-  
Original menu.  
VR  
Using the Chapter List-Original menu  
Press MENU/LIST repeatedly to display  
Title List-Original menu.  
The recorder must be stopped in order to edit using the  
Title List-Original.  
1
Use v V b B to choose the title you want to  
Press MENU/LIST repeatedly to display the Title  
List-Original menu.  
• Use the v / V buttons to display the previous/  
next page if there are more than 6 titles.  
To exit the Title List-Original menu, press  
RETURN (O).  
2
view Chapter List-Original menu then press  
ENTER.  
Title List-Original options appears on the left side of  
1
the menu.  
Use v / V to select Chapterfrom Title List-  
Original options then press ENTER.  
Chapter List-Original menu appears on the TV  
screen.  
3
1/12  
Title List  
Original  
DVD-RW  
TITLE  
7/12  
1
TITLE  
9/12  
2
5
TITLE  
10/12  
3
6
HQ  
1H 5M  
Free  
0:16:00  
0:35:00  
0:30:00  
Chapter List  
Original  
TITLE 1  
7/12 Su 30M56S  
PR-01  
1/9  
TITLE  
13/12  
4
TITLE  
TITLE  
0:08:00 16/12  
0:10:00 19/12  
0:15:00  
Close  
Select  
DISPLAY  
LIST  
Playlist  
Info  
To view Title List-Original options, select the  
title you want then press ENTER.  
Title List-Original options appears on the left side of  
the menu.  
Select  
LIST  
Playlist  
Close  
2
3
To view Chapter List-Original options, select the  
chapter you want then press ENTER.  
Chapter List-Original options appears on the left  
side of the menu.  
4
5
Use v / V to select an option then press ENTER  
to confirm.  
Use v / V to select an option then press ENTER  
Play: Starts playback the  
selected title.  
Play  
Chapter  
to confirm.  
Chapter: Moves Chapter List-  
Original menu of the title.  
(refer to right on this page)  
Play: Starts playback of the  
selected chapter.  
Play  
Title  
Delete  
Protect  
Edit  
Title: Moves to Title List-  
Original menu of the chapter.  
(refer to left on this page)  
Delete: Deletes the title. (page  
50)  
Delete  
Combine  
Protect: Protects accidental  
recording, editing or deleting of  
the title. (page 53)  
Delete: Deletes the chapter.  
(page 50)  
Playlist  
Playlist  
Combine: Combines two chap-  
Edit: Selects Edit options.  
Title Name: Edits the title  
name. (page 51)  
Delete Parts: Deletes a part  
of the Title. (page 50)  
Undo: Undoes the last delet-  
ing. (page 51)  
ters into one. (page 52)  
Playlist: Adds the chapter to the  
Playlist. (page 49)  
Title Name  
Delete Part  
Undo  
Press RETURN (O) repeatedly to exit Chapter  
List-Original menu.  
6
Redo  
Redo: Redoes the undo  
action. (page 51)  
Playlist: Adds the title to the  
Playlist. (page 49)  
Press RETURN (O) repeatedly to exit Title List-  
Original menu.  
4
43  
Title List and Chapter List Menu (Continued)  
VR  
VR  
Using the Title List-Playlist Menu  
Using the Chapter List-Playlist Menu  
Press MENU/LIST repeatedly to display the Title  
List-Playlist menu.  
• Use the v / V buttons to display the previous/  
next page if there are more than 6 titles.  
Press MENU/LIST repeatedly to display the Title  
List-Playlist menu.  
Use v V b B to choose the title you want to  
view Chapter List-Playlist menu then press  
ENTER.  
1
1
2
To exit the Title List-Playlist, press RETURN (O).  
Title List-Playlist options appears on the left side of  
the menu.  
1/12  
Title List  
Playlist  
DVD-RW  
Use v / V to select Chapterfrom Title List-  
Playlist options then press ENTER.  
Chapter List-Playlist menu appears on the TV  
screen.  
TITLE  
7/12  
1
4
TITLE  
9/12  
2
5
TITLE  
10/12  
3
6
HQ  
1H 5M  
Free  
0:16:00  
0:35:00  
0:30:00  
3
TITLE  
13/12  
TITLE  
TITLE  
0:08:00 16/12  
0:10:00 19/12  
0:15:00  
Close  
Chapter List  
Playlist  
TITLE 1  
7/12 Su 30M56S  
Select  
DISPLAY  
LIST  
Original  
Info  
1/9  
To view Title List-Playlist options, select the title  
you want then press ENTER.  
Title List-Playlist options appears on the left side of  
2
3
the menu.  
Select  
LIST  
Original  
Close  
Use v / V to select an option then press ENTER  
to confirm.  
To view Chapter List-Playlist options, select the  
chapter you want then press ENTER.  
Chapter List-Playlist options appears on the left  
side of the menu.  
Play: Starts playback the  
selected title.  
4
5
Play  
Chapter  
Chapter: Moves Chapter List-  
Playlist menu of the title. (refer  
to right on this page)  
Use v / V to select an option then press ENTER  
to confirm.  
Delete  
Title Name  
Delete: Deletes the title from the  
Title List-Playlist menu. (page  
50)  
Play: Starts playback of the  
selected chapter.  
Play  
Title  
Delete Part  
Title: Moves to Title List-Playlist  
menu of the chapter. (refer to  
left on this page)  
Title Name: Edits the title  
name. (page 51)  
Delete  
Combine  
Move  
Delete Part: Deletes a part of  
the Title. (page 50)  
Delete: Deletes the chapter from  
the Chapter List-Playlist menu.  
(page 50)  
Press RETURN (O) repeatedly to exit Title List-  
Playlist menu.  
Combine: Combines two chap-  
ters into one. (page 52)  
4
Move: Moves a chapter of  
Chapter List-Playlist menu to a  
position on the menu. (page 52)  
ip  
Press DISPLAY to display more detailed title information  
for selected title.  
Press RETURN (O) repeatedly to exit Chapter  
List-Playlist menu.  
6
44  
Title List and Chapter List Menu (Continued)  
Video  
Video  
Using the Title List menu  
Deleting a Title  
From the Title List display you can play, name and  
delete titles.  
Before a disc is finalized, you can delete titles recorded  
on the disc.  
Once a Video mode disc is finalized, the Title List  
screen changes its appearance and all you can do is  
select titles to play.  
Caution  
• If you delete a title from a DVD-R disc, the title will  
disappear from the Title List, but the available record-  
ing time will not increase.  
• When deleting a title from a DVD-RW disc, the  
remaining time available for recording will only  
increase if it is the last title on the disc.  
Press MENU/LIST to display the Title List.  
1
Title List  
1/12  
Title  
Date  
Duration  
0:20:15  
TITLE 1  
TITLE 2  
TITLE 3  
TITLE 4  
TITLE 5  
TITLE 6  
12/11  
DVD-RW  
14/11  
18/11  
20/11  
23/11  
25/11  
0:43:30  
0:33:00  
0:10:00  
0:15:00  
0:17:00  
Press MENU/LIST to display Title List  
HQ  
1H 5M  
Free  
1
Use v V b B to choose a title you want to  
2
delete then press ENTER.  
Title List options appears on the left side of the Title  
List menu.  
Select  
DISPLAY  
Info  
Close  
Use v / V to choose a title then press ENTER.  
Title List options appears on the left side of the Title  
List display.  
Use v / V to select Deletethen press ENTER to  
confirm.  
After pressing ENTER, the new, updated title list is  
displayed.  
2
3
3
Use v / V to select an option then press ENTER  
to confirm.  
Play  
Play: Starts playback the  
selected title.  
Play  
Title Name  
Delete  
Title Name  
Delete  
Title Name: Edits the title  
name. (page 51)  
Delete: Deletes the title from the  
Title List.  
Repeat steps 2-3 to delete additional titles from  
the Title List.  
4
5
Press RETURN (O) repeatedly to remove the  
Title List display.  
4 Press RETURN (O) repeatedly to exit Title List.  
ip  
Press DISPLAY to display more detailed title information  
for selected title.  
If the disc has already been finalized  
You should see a screen like the one below.  
Indicates total and current page number  
Disc name  
Title list  
DVD-RW  
1/2  
1
2
3
4
5
6
TITLE  
TITLE  
TITLE  
TITLE  
TITLE  
TITLE  
1
12/11 0:30:21  
14/11 0:20:08  
18/11 1:10:03  
20/11 0:43:21  
23/11 0:15:21  
25/11 1:13:21  
PAGE  
UP  
Moves to the next or  
previous page  
2
3
4
5
6
PAGE  
DOWN  
EXIT  
Exits the Title List screen.  
• Also you can exit the Title List display using TITLE or  
MENU/LIST.  
45  
Title List and Chapter List Menu (Continued)  
+RW  
Using the Title List menu  
ip  
Press DISPLAY to display more detailed title information  
for selected title.  
The Title List is where you can see the all recorded  
titles, and where you can delete titles and make other  
changes to the Original content of the disc. You can  
also play titles directly from the Title List menu.  
The recorder must be stopped in order to edit using the  
Title List menu.  
Caution  
If you press REC (z) when the Title List menu  
appears, the selected title is erased then overwrte  
recording starts. (See page 55 for more details.)  
Press MENU/LIST to display the Title List menu.  
1
+RW  
Using the Chapter List menu  
• Use the v / V buttons to display the previous/  
next page if there are more than 6 titles.  
To exit the Title List menu, press RETURN (O).  
Press MENU/LIST to display Title List menu.  
1
1/12  
Title List  
Use v V b B to choose the title you want to  
2
view Chapter List menu then press ENTER.  
Title List options appears on the left side of the  
menu.  
DVD+RW  
TITLE  
7/12  
1
TITLE  
9/12  
2
TITLE  
10/12  
3
6
HQ  
1H 5M  
Free  
0:16:00  
0:35:00  
0:30:00  
Use v / V to select Chapterfrom Title List  
options then press ENTER.  
Chapter List menu appears on the TV screen.  
TITLE  
13/12  
4
TITLE  
5
TITLE  
0:08:00 16/12  
0:10:00 19/12  
0:15:00  
Close  
3
Select  
DISPLAY  
Info  
REC  
Capter List  
TITLE 1  
7/12 Su 30M56S  
To view Title List options, select the title you  
want then press ENTER.  
2
3
1/9  
Title List options appears on the left side of the  
menu.  
Use v / V to select an option then press ENTER  
to confirm.  
Select  
Close  
Play: Starts playback the  
selected title except the hidden  
chapters.  
Play  
Full Play  
To view Chapter List options, select the chapter  
you want then press ENTER.  
Chapter List options appears on the left side of the  
4
5
Full Play: Starts playback the  
selected title including the hid-  
den chapters.  
Chapter  
Delete  
menu.  
Use v / V to select an option then press ENTER  
Chapter: Moves Chapter List  
menu of the title. (refer to right  
on this page)  
Protect  
Edit  
to confirm.  
Play: Starts playback of the  
Play  
Title  
selected chapter.  
Delete: Deletes the title.  
(page 50)  
Title: Moves to Title List menu  
of the chapter. (refer to left on  
this page)  
Title Name  
Divide  
Combine  
Hide  
Protect: Protects accidental  
recording, editing or deleting of  
the title. (page 53)  
Combine: Combines two chap-  
ters into one. (page 52)  
Hide  
Edit: Selects Edit options.  
Title Name: Edits the title  
name. (page 51)  
Hide (Show): Hides (or Shows)  
the selected chapter. (page 53)  
Divide: Divides one title into  
two titles. (page 54)  
Hide (Show): Hides (or  
Shows) the all chapters within  
the title. (page 53)  
Press RETURN (O) repeatedly to exit Chapter  
List menu.  
6
Press RETURN (O) repeatedly to exit Title List  
menu.  
4
46  
Title List and Chapter List Menu (Continued)  
+R  
+R  
Using the Title List menu  
Using the Chapter List menu  
The Title List is where you can see the all recorded  
titles, and where you can delete titles and make other  
changes to the Original content of the disc. You can  
also play titles directly from the Title List menu.  
The recorder must be stopped in order to edit using the  
Title List menu.  
Press MENU/LIST to display Title List menu.  
1
2
Use v V b B to choose the title you want to  
view Chapter List menu then press ENTER.  
Title List options appears on the left side of the  
menu.  
Press MENU/LIST to display the Title List menu.  
Use v / V to select Chapterfrom Title List  
options then press ENTER.  
Chapter List menu appears on the TV screen.  
1
3
• Use the v / V buttons to display the previous/  
next page if there are more than 6 titles.  
To exit the Title List menu, press RETURN (O).  
Capter List  
TITLE 1  
7/12 Su 30M56S  
1/12  
1/9  
Title List  
DVD+R  
TITLE  
7/12  
1
4
TITLE  
9/12  
2
5
TITLE  
10/12  
3
HQ  
1H 5M  
Free  
0:16:00  
0:35:00  
0:30:00  
Select  
Close  
TITLE  
13/12  
TITLE  
Empty Title  
0:10:00 - - / - -  
0:08:00 16/12  
1:38:00  
Close  
Select  
DISPLAY  
Info  
To view Chapter List options, select the chapter  
you want then press ENTER.  
Chapter List options appears on the left side of the  
4
5
To view Title List options, select the title you  
want then press ENTER.  
Title List options appears on the left side of the Title  
2
3
menu.  
Use v / V to select an option then press ENTER  
to confirm.  
List menu.  
Use v / V to select an option then press ENTER  
to confirm.  
Play: Starts playback of the  
selected chapter.  
Play  
Play: Starts playback the  
selected title except the hidden  
chapters.  
Play  
Full Play  
Title  
Title: Moves to Title List menu  
of the chapter. (refer to left on  
this page)  
Combine  
Hide  
Full Play: Starts playback the  
selected title including the hid-  
den chapters.  
Chapter  
Delete  
Combine: Combines two chap-  
ters into one. (page 52)  
Protect  
Edit  
Hide (Show): Hides (or Shows)  
the selected chapter. (page 53)  
Chapter: Moves Chapter List  
menu of the title. (refer to right  
on this page)  
Press RETURN (O) repeatedly to exit Chapter  
List menu.  
Delete: Deletes the title.  
(page 50)  
Title Name  
Divide  
6
Protect: Protects accidental  
recording, editing or deleting of  
the title. (page 53)  
Hide  
Edit: Selects Edit options.  
Title Name: Edits the title  
name. (page 51)  
Hide (Show): Hides (or  
Shows) the all chapters within  
the title.  
Press RETURN (O) repeatedly to exit Title List  
menu.  
4
ip  
Press DISPLAY to display more detailed title information  
for selected title.  
47  
Title and Chapter Editing  
Edits you make to the Original content changes the  
actual content of the disc. For example, if you delete a  
title or chapter from the Original content (Title or  
Chapter), that title or chapter is deleted from the disc,  
freeing up extra recording time.  
When you edit the Playlist, on the other hand, you are  
not changing the content of the disc. For example,  
when you delete a title from the Playlist, you are just  
telling the recorder not to play that title; nothing is actu-  
ally deleted from the disc.  
VR  
Adding Chapter Markers  
Chapter  
You can put a chapter marker anywhere in a Playlist or  
Original title during recording or playback.  
Once the chapter is marked, you can use the Chapter  
Search feature, as well as delete, combine and move  
chapters in the Chapter List-Original or Chapter List-  
Playlist menu.  
You can insert up to 999 chapter markers in both the  
Original and Playlist contents.  
VR  
Titles, Chapters and Parts  
Titles in the disc’s original content contain one or more  
chapters. When you insert a title into the Playlist, all the  
chapters within that title also appear. In other words,  
chapters in the Playlist behave exactly as chapters on a  
DVD-Video disc do. Parts are sections of Original or  
Playlist titles. From the Original and Playlist menu you  
can add or delete parts. Adding a chapter or title to the  
Playlist creates a new title made up of a section (ie.,  
chapter) of an Original title. Deleting a part removes  
part of a title from the Original or Playlist menu.  
ote  
Chapter markers are inserted at regular intervals auto-  
matically. You can change this interval from the Initial  
Setup menu (see Auto Chapter on page 25).  
Play the title (Original or Playlist).  
1
2
At the point you want to start a new chapter,  
press CHP ADD.  
A chapter marker icon appears on the TV screen.  
You can also put chapter markers in during recording.  
Caution  
• When editing using the Delete, Add and Move func-  
tions, the start and end frames may not be exactly as  
set in the start and end point display.  
Changing Title Thumbnails  
• During Playlist playback, you may notice a momen-  
tary pause between edits. This is not a malfunction.  
Thumbnail  
VR  
+RW  
+R  
Each title displayed in the Title List menu is represented  
by a thumbnail picture taken from the start of that title or  
chapter.  
If you prefer, select a different still picture from within a  
title.  
Play the title (Original or Playlist).  
1
Press THUMBNAIL to make the currently dis-  
2
played picture the one that appears in the  
Original or Playlist menu.  
The still picture that you choose appears in both the  
Original or Playlist menu.  
ip  
You can also change the thumbnail picture of the title on  
the Chapter List-Original or Chapter List-Playlist menu.  
Select a chapter on the Chapter List-Original or Chapter  
List-Playlist menu then press THUMBNAIL. The thumb-  
nail picture of the title that includes the chapter is  
changed.  
48  
Title and Chapter Editing (Continued)  
VR  
Adding Additional Title/Chapters to the  
Making a New Playlist  
VR  
Playlist  
Use this function to add an Original title or chapter to  
the Playlist. When you do this, the whole title is put into  
the Playlist (you can delete bits you don’t need later —  
see Deleting an Original or Playlist title/chapter on page  
50).  
You can add an Original title or chapter to add to a  
Playlist title even if it is already registered.  
Press MENU/LIST repeatedly to display  
Title List-Original menu.  
If you want to show the Chapter List-Original menu,  
refer to “Using the Chapter List-Original” on page  
43.  
1
The title appears in the Playlist complete with the chap-  
ter markers that appear in the Original. However, if you  
add more chapter markers to the Original later, these  
are not automatically copied over into the Playlist title.  
Choose an Original title or chapter to put into  
the Playlist, then press ENTER.  
Original menu options appears on the left side of  
the screen.  
You can add up to 999 chapters to one disc . If you only  
want to add a chapter of a title, use the Adding a  
title/chapter to the Playlist on this page.  
2
Press MENU/LIST repeatedly to display  
Title List-Original menu.  
If you want to display the Chapter List-Original  
menu, refer to “Using the Chapter List-Original  
menu” on page 43.  
1
Play  
Play  
Chapter  
Delete  
Protect  
Edit  
Title  
Choose a title or chapter on the Original menu  
to put into the Playlist, then press ENTER.  
Original (Title or Chapter) options appears on the  
left side of the Original menu.  
Delete  
Combine  
2
Playlist  
Playlist  
Title List-Original  
Chapter List-Original  
Play  
Play  
Chapter  
Delete  
Protect  
Edit  
Use v / V to select Playlistfrom Original menu  
options then press ENTER.  
3
4
Title  
Delete  
Combine  
Select Playlist.  
New Playlist  
TITLE 1  
Playlist  
Playlist  
TITLE 2  
Title List-Original  
Chapter List-Original  
Use v / V to select Playlistfrom Original  
options then press ENTER.  
3
4
Choose a Title List-Playlist that is already regis-  
tered to insert a title or chapter, then press  
ENTER.  
The title or chapter appears in the updated Playlist  
menu.  
Select Playlist.  
New Playlist  
Repeat steps 1-4 to add additional title or chap-  
ter on the Playlist.  
5
6
Press RETURN (O) to exit, or MENU/LIST to go  
back to the Title List-Original menu.  
Select New Playlistthen press ENTER.  
The new title appears in the updated Playlist. All  
chapters of the title are added to the Playlist.  
49  
Title and Chapter Editing (Continued)  
Deleting a Title/Chapter  
VR  
Deleting a Part  
VR  
+RW  
+R  
You can delete a part which you do not want in the title.  
When you erase a title or chapter from the Playlist  
menu on DVD-RW discs formatted in VR mode, you  
only remove it from the Playlist; the title/chapter remains  
in the Original menu.  
Press MENU/LIST repeatedly to display  
Title List-Original or Title List-Playlist menu.  
1
Use v V b B to choose a title you want to  
2
delete then press ENTER.  
The options appears on the left side of the menu.  
If you choose to delete a title or chapter from Title List  
or Chapter List menu, the title or chapter is actually  
deleted from the disc and the remaining time available  
for recording increases. Titles/chapters deleted from the  
Original are also removed from the Playlist.  
Select Delete Partfrom the options on the  
menu.  
e.g., If you select “Delete Part” on Title List-Original  
menu.  
3
ote  
Play  
It may not be possible to delete chapters that are less  
Title Name  
Chapter  
Delete Part  
than 5 seconds long.  
Delete  
Undo  
Protect  
Redo  
Edit  
On the Title List or Chapter List menu, use v V  
1
b B to choose a chapter or title you want to  
delete then press ENTER.  
Options appears on the left side of the screen.  
Playlist  
Select Deleteoption on the options on the  
menu.  
2
Press ENTER.  
Title Edit (Delete Part) menu appears on the TV  
screen.  
‘Start’ icon is highlighted.  
e.g., If you select “Delete” on Title List-Original  
menu.  
4
Play  
TITLE  
1
Title Edit  
-Delete Part  
Chapter  
Delete  
Protect  
Edit  
20/8 00:35:42  
Start  
End  
0:00:00.00  
Cancel  
Done  
Select  
Move Point  
Press ENTER to confirm.  
3
4
The confirm message for deleting will appear.  
Starts playback and use pause step, search and  
slow-motion to find the starting point.  
5
6
Use b / B to select Yesthen press ENTER.  
The selected chapter or title is deleted.  
After pressing ENTER, the new, updated menu is  
displayed.  
Press ENTER at the starting point of the section  
you want to delete.  
‘End’ icon is highlighted.  
The part is indicated on the Progress Bar.  
Repeat steps 1 - 4 to continue to delete from the  
5
6
menu.  
Use pause step, search, skip and slow-motion  
to find the ending point.  
7
8
Press RETURN (O) repeatedly to exit the  
menu.  
Press ENTER at the ending point of the section  
you want to delete.  
You can cancel the selected point, use v / V to  
select ‘Cancel’ icon then press ENTER.  
ote  
• When DVD+RW recording, the deleted title’s name is  
changed to ‘Deleted Title”.  
• If the deleted titles more than two are continued, the  
titles are combined into one.  
If you finish to edit, select Doneicon then  
press ENTER.  
The confirm message for deleting will appear.  
9
Use b / B to select Yesthen press ENTER.  
The selected part is deleted from the title and Title  
List-Original or Title List-Playlist menu appears.  
10  
50  
Title and Chapter Editing (Continued)  
VR  
VR  
Video  
+RW  
+R  
Undoing/Redoing the Last Deleting  
Naming a Title  
If you make a mistake while deleting, you can undo it.  
There is one level of undo (in other words, you can  
undo the last one deleting you made).  
You can name titles independently. Names can be up to  
32 characters long.  
On the Title List menu, use v V b B to choose  
the title you want to name then press ENTER.  
Options appears on the left side of the menu.  
Select Undofrom the Title List-Original or  
1
1
Chapter List-Original menu then press ENTER.  
It doesn’t matter whether you are currently in the  
Title List-Original or Chapter List-Original menu; the  
last deleting is undone.  
Use v/V to select Title Nameoption then press  
ENTER.  
Keyboard menu appears.  
2
e.g., If you select “Undo” on Title List-Original  
menu.  
e.g., If you select “Title Name” on Title List-Original  
menu.  
Play  
Play  
Title Name  
Chapter  
Delete Part  
Delete  
Undo  
Title Name  
Chapter  
Delete Part  
Delete  
Undo  
Protect  
Redo  
Edit  
Protect  
Redo  
Edit  
Playlist  
Playlist  
Enter a name for the title. Use v V b B to select  
a character then press ENTER to confirm your  
selection. Refer step 3 as shown on page 20  
(Station Rename).  
otes  
3
You can’t undo a recording.  
You can’t undo anything after ejecting the disc from  
the recorder or switching the recorder into standby.  
You can still undo deleting after exiting the menu  
screen.  
TITLE 1  
6 (1.6)  
Alphabet Capital  
1
A
K
U
2
B
L
V
3
C
4
D
N
X
5
E
O
Y
6
F
P
Z
7
8
H
R
9
I
0
J
T
ip  
G
Q
You can redo the last undo action using Redo’  
option. Select Redofrom the Title List-Original or  
Chapter List-Original menu options then press  
ENTER.  
M
W
S
OK  
Cancel Space Delete  
Choose OK then press ENTER to fix the name  
and return to the previous menu screen.  
4
5
Press RETURN (O) repeatedly to exit the  
menu.  
otes  
• Names can be up to 32 characters long.  
• For discs formatted on a different DVD Recorder, you  
will see only a limited character set.  
• When recording in DVD-R, DVD+R or DVD+RW, the  
entered name is displayed on the DVD player only  
after finalizing.  
51  
Title and Chapter Editing (Continued)  
Combining Two Chapters Into One  
VR  
Moving a Playlist Chapter  
VR  
+RW  
+R  
Use this function to re-arrange the playing order of  
Playlist chapters on the Title List-Playlist menu.  
Use this function to combine two adjacent Playlist or  
Original chapters into one.  
Press MENU/LIST repeatedly to display Title  
1
List-Playlist menu.  
To display the Chapter List-Playlist menu, refer to  
“Using the Chapter List-Playlist” on page 44.  
ote  
This function is not available if there is only one chapter  
within the title.  
ote  
On the Chapter List menu, select the second  
This function is not available if there is only one chapter.  
1
chapter of the two chapters you want to com-  
bine then press ENTER.  
Chapter List options appears on the left side of the  
menu.  
Chapter List  
Playlist  
TITLE 1  
7/12 Su 30M56S  
1/9  
Use v / V to select Combine.  
The combine indicator appears between the two  
chapters you want to combine.  
2
e.g., If you select “Combine” on Chapter List-  
Original menu.  
Select  
LIST  
Original  
Close  
Select a chapter from the Chapter List-Playlist  
menu.  
Play  
2
3
Title  
Press ENTER.  
Chapter List-Playlist options appears on the left  
side of the menu.  
Delete  
Combine  
Use v / V to select Movefrom Playlist  
options then press ENTER.  
Playlist  
4
Press ENTER to confirm.  
After pressing ENTER, the updated menu is dis-  
Play  
3
played.  
Title  
Delete  
Combine  
Move  
Use v V b B to choose the place you want to  
move the chapter to then press ENTER.  
After pressing ENTER, updated menu is displayed.  
5
52  
Title and Chapter Editing (Continued)  
VR  
+RW  
+R  
+RW  
+R  
Protect a Title  
Hide a Title/Chapter  
Use this function to protect accidental recording, editing  
or deleting of the title.  
Use this function to hide a title/chapter on the Title List  
or Chapter List menu.  
Press MENU/LIST to display Title List menu.  
On the Title List or Chapter List menu,  
use v V b B to choose a title or chapter you  
want to hide then press ENTER.  
Options appears on the left side of the screen.  
1
2
1
Use v V b B to choose a title you want to pro-  
tect then press ENTER.  
Options appears on the left side of the screen.  
2 Select Hideoption on the options.  
3 Select Protectoption on the options.  
e.g., If you select “Hide” on Title List menu.  
Play  
Play  
Full Play  
Chapter  
Delete  
Full Play  
Chapter  
Delete  
Title Name  
Protect  
Edit  
Protect  
Divide  
Edit  
Hide  
Press ENTER to confirm.  
The title’s thumbnail will be dim.  
Press ENTER to confirm.  
The lock mark will appears on the title’s thumbnail.  
3
4
ip  
ip  
If you select a title that has already been dim on the  
Title List menu, you can ‘show’ it by choosing “Show”  
from the Title List menu options. After doing this, you  
can see the title.  
If you select a title that has already been protected on  
the Title List menu, you can ‘unprotect’ it by choosing  
“Protect” from the Title List menu options. After doing  
this, you can edit and delete the title.  
53  
Title and Chapter Editing (Continued)  
+RW  
Divide One Title Into Two  
Use this command to split a title up into two new titles.  
On the Title List menu, select a title you want to  
divide then press ENTER.  
The menu options appears on the left side of the  
screen.  
1
2 Select Dividefrom the Title List menu options.  
Play  
Full Play  
Chapter  
Delete  
Title Name  
Protect  
Edit  
Divide  
Hide  
Press ENTER when Divideoption is highlight-  
ed.  
Title Edit-Divide menu appears and goes into STOP  
mode.  
3
Current picture  
TITLE 1  
Title Edit  
20/8 00:35:42  
- Divide  
The first title’s  
thumbnail  
#1  
Thumbnail  
The second title’s  
thumbnail  
Divide  
Cancel  
Done  
0:00:00.00  
Select  
Move Point  
Use pause step, search, skip and slow-motion  
to find the point you want to divide the title.  
4
5
When Divideoption is highlighted, press  
ENTER at the point.  
You can clear the dividing point and exit the Title  
Edit-Divide menu, use v / V to select ‘Cancel’  
option then press ENTER. The dividing point is  
clear.  
Choose Doneoption then press ENTER to fix  
the dividing point.  
The title is divided into two new titles. It take up to  
6
4 minutes to divide.  
54  
Addition Information  
Video  
VR  
+RW  
Viewing Title List menu displayed  
on other DVD recorders or players  
Clean-up Recording  
You can simply clean-up (erase) all contents on the disc  
then start recording from the first section of the disc.  
The disc format is not changed.  
+RW  
+R  
You can view the Title List menu displayed on the  
another DVD player that is capable of playing DVD+RW  
or DVD+R discs.  
Switch on the recorder and load a recordable  
1
disc.  
Press and hold REC (z) button for more than 3  
Insert DVD+R or DVD+RW disc recorded  
already.  
2
seconds.  
1
The message will appears on the TV screen.  
Press TITLE or press and hold MENU/LIST but-  
Delete all title and record?  
2
ton for three seconds in stop mode.  
Title List menu will appear as below.  
Yes  
No  
Use b / B to select Yesthen press ENTER.  
Recording will start. (The REC indicator lights in  
the display window.)  
ip  
3
You can remove the Title List menu by pressing  
STOP (x).  
DVD+RW  
Title List  
+RW  
Overwrite Recording  
TITLE  
7/12  
1
4
TITLE  
0:16:00 9/12  
2
5
TITLE  
3
6
0:35:00 10/12  
0:30:00  
0:15:00  
To overwrite a new video recording to a previously  
recorded title, follow these steps. This feature is not  
available on DVD+R, which always record at the end of  
the Disc.  
TITLE  
13/12  
TITLE  
TITLE  
0:08:00 16/12  
0:10:00 19/12  
1/2  
Select input source you want to record (chan-  
1
nel, AV1-4, DV).  
To play back a title, select the title you want  
then press ENTER or N (PLAY).  
2 Press MENU/LIST to display the Title List menu.  
3
1/12  
Title List  
Playing Your Recordings on Other DVD  
Players (Finalizing a Disc)  
Most regular DVD players can play finalized discs  
recorded in Video mode, finalized DVD+R or DVD+RW.  
A small number of players can also play DVD-RW discs  
recorded in VR mode, finalized or not. Check the manu-  
al that came with the other player to check what kinds  
of discs it will play.  
DVD+RW  
TITLE  
7/12  
1
4
TITLE  
9/12  
2
TITLE  
10/12  
3
HQ  
1H 5M  
Free  
0:16:00  
0:35:00  
0:30:00  
TITLE  
13/12  
TITLE  
5
TITLE  
6
0:08:00 16/12  
0:10:00 19/12  
0:15:00  
Close  
Select  
DISPLAY  
Info  
REC  
Use v V b B to choose a title you want to over-  
3
4
write.  
Press REC (z) to start overwrite recording.  
Overwrite recording is started from the start point of  
the title.  
Finalizing ‘fixes’ the recordings and editings in place so  
that the disc can be played on a regular DVD player or  
computer equipped with a suitable DVD-ROM drive.  
Finalizing a Video mode disc creates a menu screen for  
navigating the disc. This is accessed by pressing  
MENU/LIST or TITLE.  
Press STOP (x) to stop the overwrite recording.  
The new title is created and updated menu is dis-  
played.  
5
To finalize a disc, refer to Finalizeon page 27.  
otes  
otes  
This function is not available with a protected title.  
If the overwriting is elapsed more than the recording  
length of the current title, the next title is overwrited.  
But if next title is protected, the overwriting is stopped  
at the starting point of the title.  
If the selected title’s recording length is less than 10  
seconds, the next title is overwrited. But if next title is  
protected, the overwriting is stopped.  
Unfinalized DVD+RW is playable on regular DVD  
players.  
The edited contents of DVD+RW disc is compatible  
on regular DVD players only after finalizing.  
Any edited contents of the DVD+R disc are not be  
compatible on regular DVD players. (Hide, chapter  
combine, added chapter mark, etc.)  
55  
Language Code List  
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”  
(See page 22).  
Code Language  
Code Language  
Code Language  
Code Language  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Abkhazian  
Afar  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Fiji  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Lingala  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Finnish  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Afrikaans  
Albanian  
Amharic  
Arabic  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Malayalam  
Maltese  
Armenian  
Assamese  
Aymara  
Maori  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Marathi  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
Tamil  
Basque  
Tatar  
Bengali; Bangla  
Bhutani  
Hebrew  
Hindi  
Nepali  
Telugu  
Thai  
Norwegian  
Oriya  
Bihari  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Tibetan  
Tigrinya  
Tonga  
Breton  
Panjabi  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Pashto, Pushto  
Persian  
Turkish  
Turkmen  
Twi  
Polish  
Italian  
Portuguese  
Quechua  
Rhaeto-Romance  
Romanian  
Russian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
Ukrainian  
Urdu  
Chinese  
Corsican  
Croatian  
Czech  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Samoan  
Sanskrit  
Danish  
Dutch  
Korean  
Scots Gaelic  
Serbian  
Wolof  
English  
Kurdish  
Laothian  
Latin  
Xhosa  
Esperanto  
Estonian  
Faeroese  
Serbo-Croatian  
Shona  
Yiddish  
Yoruba  
Zulu  
Latvian, Lettish  
Sindhi  
56  
Country Code List  
Enter the appropriate code number for the initial setting “Country Code” (See page 25).  
Code Country  
Code Country  
Code Country  
Code Country  
AD  
AE  
AF  
AG  
AI  
Andorra  
ER  
ES  
ET  
FI  
Eritrea  
Spain  
Ethiopia  
Finland  
LC  
LI  
LK  
LR  
LS  
LT  
LU  
LV  
Saint Lucia  
Liechtenstein  
Sri Lanka  
Liberia  
Lesotho  
Lithuania  
Luxembourg  
Latvia  
Libya  
Morocco  
Monaco  
SC  
SD  
SE  
SG  
SH  
SI  
Seychelles  
Sudan  
Sweden  
Singapore  
Saint Helena  
Slovenia  
Svalbard and Jan Mayen  
Islands  
Slovak Republic  
Sierra Leone  
San Marino  
Senegal  
Somalia  
Suriname  
Saint Tome and Principe  
Former USSR  
El Salvador  
Syria  
Swaziland  
Turks and Caicos Islands  
Chad  
French Southern  
Territories  
Togo  
Thailand  
Tadjikistan  
Tokelau  
Turkmenistan  
Tunisia  
Tonga  
East Timor  
Turkey  
Trinidad and Tobago  
Tuvalu  
Taiwan  
Tanzania  
United Arab Emirates  
Afghanistan  
Antigua and Barbuda  
Anguilla  
Albania  
Armenia  
Netherlands Antilles  
Angola  
Antarctica  
Argentina  
American Samoa  
Austria  
Australia  
FJ  
Fiji  
AL  
FK  
FM  
FO  
FR  
FX  
Falkland Islands  
Micronesia  
Faroe Islands  
France  
France (European  
Territory)  
Gabon  
Great Britain  
Grenada  
Georgia  
French Guyana  
Ghana  
Gibraltar  
Greenland  
Gambia  
AM  
AN  
AO  
AQ  
AR  
AS  
AT  
AU  
AW  
AZ  
BA  
BB  
BD  
BE  
BF  
BG  
BH  
BI  
SJ  
LY  
SK  
SL  
SM  
SN  
SO  
SR  
ST  
SU  
SV  
SY  
SZ  
TC  
TD  
TF  
MA  
MC  
MD  
MG  
MH  
MK  
ML  
MM  
MN  
MO  
MP  
MQ  
MR  
MS  
MT  
MU  
MV  
GA  
GB  
GD  
GE  
GF  
GH  
GI  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
Moldavia  
Madagascar  
Marshall Islands  
Macedonia  
Mali  
Myanmar  
Mongolia  
Aruba  
Azerbaidjan  
Bosnia-Herzegovina  
Barbados  
Bangladesh  
Belgium  
Burkina Faso  
Bulgaria  
Bahrain  
Burundi  
Benin  
Bermuda  
Brunei Darussalam  
Bolivia  
Brazil  
Bahamas  
Bhutan  
Bouvet Island  
Botswana  
Belarus  
Belize  
Canada  
Cocos (Keeling) Islands  
Central African Republic  
Congo  
Switzerland  
Ivory Coast  
Cook Islands  
Chile  
Cameroon  
China  
Colombia  
Costa Rica  
Former Czechoslovakia  
Cuba  
Cape Verde  
Christmas Island  
Cyprus  
Czech Republic  
Germany  
Djibouti  
Denmark  
Dominica  
Dominican Republic  
Algeria  
Ecuador  
Estonia  
Egypt  
Western Sahara  
Macau  
Northern Mariana Islands  
Martinique (French)  
Mauritania  
Montserrat  
Malta  
Guinea  
Guadeloupe (French)  
Equatorial Guinea  
Greece  
S. Georgia & S. Sandwich  
Isls.  
Guatemala  
Guam (USA)  
Guinea Bissau  
Guyana  
Hong Kong  
Heard and McDonald  
Islands  
Honduras  
Croatia  
Haiti  
Hungary  
Indonesia  
Ireland  
Israel  
India  
British Indian Ocean  
Territory  
Iraq  
Iran  
Iceland  
Italy  
Jamaica  
TG  
TH  
TJ  
TK  
TM  
TN  
TO  
TP  
TR  
TT  
TV  
TW  
TZ  
UA  
UG  
UK  
UM  
BJ  
Mauritius  
Maldives  
BM  
BN  
BO  
BR  
BS  
BT  
BV  
BW  
BY  
BZ  
CA  
CC  
CF  
CG  
CH  
CI  
CK  
CL  
CM  
CN  
CO  
CR  
CS  
CU  
CV  
CX  
CY  
CZ  
DE  
DJ  
GT  
GU  
GW  
GY  
HK  
HM  
MW Malawi  
MX  
MY  
MZ  
AN  
NC  
NE  
NF  
NG  
NI  
NL  
NO  
NP  
NR  
NU  
NZ  
OM  
PA  
PE  
PF  
PG  
PH  
PK  
PL  
PM  
PN  
PR  
PT  
PW  
PY  
QA  
RE  
RO  
RU  
RW  
SA  
SB  
Mexico  
Malaysia  
Mozambique  
Namibia  
New Caledonia (French)  
Niger  
Norfolk Island  
Nigeria  
Nicaragua  
Netherlands  
Norway  
Nepal  
Nauru  
Niue  
New Zealand  
Oman  
Panama  
Peru  
Polynesia (French)  
Papua New Guinea  
Philippines  
Pakistan  
HN  
HR  
HT  
HU  
ID  
IE  
IL  
IN  
IO  
Ukraine  
Uganda  
United Kingdom  
USA Minor Outlying  
Islands  
United States  
Uruguay  
Uzbekistan  
Vatican City State  
Saint Vincent &  
Grenadines  
Venezuela  
Virgin Islands (British)  
Virgin Islands (USA)  
Vietnam  
Vanuatu  
Wallis and Futuna Islands  
Samoa  
Yemen  
Mayotte  
Yugoslavia  
South Africa  
Zambia  
Zaire  
Zimbabwe  
US  
UY  
UZ  
VA  
VC  
IQ  
IR  
IS  
IT  
JM  
JO  
JP  
KE  
KG  
KH  
KI  
KM  
KN  
KP  
KR  
KW  
KY  
KZ  
LA  
LB  
VE  
VG  
VI  
Jordan  
Japan  
Kenya  
Poland  
Saint Pierre and Miquelon  
Pitcairn Island  
Puerto Rico  
Portugal  
Palau  
Paraguay  
Qatar  
Reunion (French)  
Romania  
Russian Federation  
Rwanda  
Saudi Arabia  
Solomon Islands  
VN  
VU  
WF  
WS  
YE  
YT  
YU  
ZA  
ZM  
ZR  
ZW  
Kyrgyzstan  
Cambodia6  
Kiribati  
Comoros  
Saint Kitts & Nevis Anguilla  
North Korea  
South Korea  
Kuwait  
DK  
DM  
DO  
DZ  
EC  
EE  
EG  
EH  
Cayman Islands  
Kazakhstan  
Laos  
Lebanon  
57  
Controlling Your TV with the Supplied Remote  
Controlling TVs with the remote  
You can control the sound level, input source, and  
power switch of TVs as well. If your TV is listed  
in the table below, set the appropriate manufacturer  
code.  
1. While holding down TV POWER button, press  
the number buttons to select the manufacturer  
code for your TV (see the table below).  
2. Release TV POWER button.  
Code numbers of controllable TVs  
If more than one code number is listed, try entering  
them one at a time until you find the one that works with  
your TV.  
Manufacturer  
LG / GoldStar  
Zenith  
Code Number  
1 (Default), 2  
1, 3, 4  
6, 7  
8, 9  
4
Samsung  
Sony  
Hitachi  
otes  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code.  
If you enter a new code number, the code number  
previously entered will be erased.  
When you replace the batteries of the remote, the  
code number you have set may be reset to the  
default setting. Set the appropriate code number  
again.  
58  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Solution  
Symptom  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall outlet  
securely.  
No picture.  
No sound.  
The TV is not set to receive DVD  
Recorder signal output.  
Select the appropriate video input mode  
on the TV so the picture from the DVD  
Recorder appears on the TV screen.  
The video cable is not connected  
securely.  
Connect the video cable securely.  
The connected TV power is turned off.  
Turn on the TV.  
The equipment connected with the  
audio cable is not set to receive DVD  
Recorder signal output.  
Select the correct input mode on the  
audio receiver so you can listen to the  
sound from the DVD Recorder.  
The audio cables are not connected  
Connect the audio cable securely.  
securely.  
The power of the equipment connected  
with the audio cable is turned off.  
Turn on the equipment connected with  
the audio cable.  
The audio connecting cord is damaged. Replace it with new one.  
The disc is dirty.  
Clean the disc.  
The playback picture is  
poor.  
No disc is inserted.  
Insert a disc. (Check that the disc indi-  
cator in the display window is lit.)  
The DVD Recorder  
does not start playback.  
An unplayable disc is inserted.  
The disc is placed upside down.  
The disc is not placed within the guide.  
Insert a playable disc. (Check the disc  
type, color system, and regional code.)  
Place the disc with the playback side  
down.  
Place the disc on the disc tray correctly  
inside the guide.  
The disc is dirty.  
Clean the disc.  
The Rating level is set.  
Cancel the Rating function or change  
the rating level.  
The video signal from the external com- You cannot connect via this recorder.  
The picture from the  
external input is distort-  
ed  
ponent is copy-protected.  
Connect the component directly to your  
TV.  
Those channels are not stored in the  
recorder.  
Restore channels. See “Program Edit”  
on pages 20-21.  
Some channels are  
skipped over when  
using v / V.  
Aerial or cables are loose.  
Tighten connections or replace cable.  
The picture or sound of  
broadcasting channel is  
weak or missing.  
Camcorder is off.  
Turn camcorder on and operate  
properly.  
Camcorder image is not  
shown.  
DVD Recorder INPUT SELECT is  
incorrect.  
Use AV to select input channel (AV1,  
AV2, DV, etc.)  
Camcorder image via  
A/V input or DV IN to  
DVD Recorder is not  
shown on TV screen.  
59  
Troubleshooting (Continued)  
Cause  
Solution  
Finalize the disc. (page 27)  
No solution.  
Symptom  
The disc was recorded in Video mode.  
Can’t play a disc  
recorded using this  
recorder on another  
player.  
Some players will not play even a final-  
ized disc recorded in Video mode.  
The disc was recorded in VR mode,  
The other player must be RW compati-  
ble in order to play it.  
Discs recorded with copy-once material  
No solution.  
cannot be played on other players.  
The remaining blank space on the disc  
is insufficient.  
Use another disc.  
Cannot record or did  
not record successfully.  
The source you are trying to record is  
You cannot record the source.  
copy protected.  
When setting the recording channel, the Select the channel on the recorder’s  
channel is tuned on the TV’s own tuner.  
built-in TV tuner.  
When recording to a Video mode disc,  
programs that are copy-once protected  
cannot be recorded.  
Use a VR mode formatted disc for copy-  
once material.  
Timer recording is not  
possible.  
Clock in DVD Recorder is not set to cor- Set clock to correct time. See “Clock  
rect time.  
Set” on page 21.  
Timer has been programmed  
incorrectly.  
Reprogram Timer. See “Timer  
Recording” on page 40.  
Timer record indicator light does not  
Reprogram Timer.  
appear after programming timer.  
Stereo Audio Record  
and/or Playback is not  
present.  
TV is not Stereo-compatible.  
No solution.  
Broadcast program is not in stereo for-  
mat.  
No solution.  
DVD Recorder A/V Out jacks are not  
connected to TV A/V In jacks.  
Make A/V connections. Stereo is  
available only via A/V output from DVD  
Recorder.  
DVD Recorder Audio/Video Out is not  
Select AUX or A/V source as TV input.  
selected for viewing at the TV.  
DVD Recorder’s TV audio channel is set Set TV audio channel mode to Stereo.  
to mono.  
See “Changing TV audio channel” on  
page 40.  
The remote control is not pointed at the  
remote sensor of the DVD Recorder.  
Point the remote control at the remote  
sensor of the DVD Recorder.  
The remote control  
does not work properly.  
The remote control is too far from the  
DVD Recorder.  
Operate the remote control within 7 m.  
Remove the obstacle.  
There is an obstacle in the path of the  
remote control and the DVD Recorder.  
The batteries in the remote control are  
Replace the batteries with new ones.  
exhausted.  
Moisture Condensation  
Moisture condensation can occur:  
In locations where moisture condensation may occur:  
• When the DVD Recorder is moved from a cold place  
to a warm place.  
Keep the DVD Recorder plugged into an AC power  
outlet with POWER On. This will help prevent conden-  
sation.  
• Under extremely humid conditions.  
• When condensation has occurred, wait a few hours  
for the DVD Recorder to dry before using it.  
60  
Specifications  
General  
Power requirements  
AC 110-240V, 50/60 Hz  
Power consumption  
Dimensions (approx.)  
Mass (approx.)  
30W  
430 X 76 X 383 mm (w x h x d)  
5.5 kg  
Operating temperature  
Operating humidity  
Television system  
Recording format  
5˚C to 35˚C  
5 % to 90 %  
PAL B/G, PAL I/I, colour system  
PAL  
Recording  
Recording format  
Recordable discs  
Recordable time  
DVD VideoRecording, DVD-VIDEO  
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable  
Approx. 1 hour (HQ mode), 2 hours (SQ mode), 4 hours (LQ mode),  
6 hours (EQ mode)  
Video recording format  
Sampling frequency  
Compression format  
Audio recording format  
Sampling frequency  
Compression format  
27MHz  
MPEG 2  
48kHz  
Dolby Digital  
Playback  
Frequency response  
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz  
DVD (PCM 96 kHz): 8 Hz to 44 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100 dB (AUDIO OUT connector)  
Less than 0.008% (AUDIO OUT connector)  
More than 95 dB (AUDIO OUT connector)  
Inputs  
AERIAL IN  
VIDEO IN  
AUDIO IN  
DV IN  
Aerial input, 75 ohms  
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2  
0 dBm more than 47 kohms, RCA jack (L, R) x 2  
4 pin (i.LINK/IEEE 1394 standard)  
Outputs  
VIDEO OUT  
S-VIDEO OUT  
1 Vp-p 75 , sync negative, RCA jack x 1  
(Y) 1.0 V (p-p), 75 , negative sync, Mini DIN 4-pin x 1  
(C) 0.3 V (p-p) 75 Ω  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 , negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2  
0.5 V (p-p), 75 , RCA jack x 1  
3 V (p-p), 75 , Optical connector x 1  
2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1  
Audio output (digital audio)  
Audio output (optical audio)  
Audio output (analog audio)  
Accessory:  
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
RF Coaxial Cable . . . . . . . . . . . . . . . . . . . . . . . . .1  
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Audio cable (L, R) . . . . . . . . . . . . . . . .1  
Remote control . . . . . . . . . . . . . . . . . .1  
Design and specifications are subject to change without notice.  
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trade-  
marks of Dolby Laboratories.  
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.  
61  
NEC Service Centres  
NEC Australia Pty. Ltd.  
ABN 86 001 217 527  
Home Electronics Group  
NEC Service Centres PHONE 131-632  
From any where in Australia  
NEW South Wales  
Sydney  
Newcastle  
184 Milperra Rd, Revesby 2212  
120 Parry Street, Newcastle 2302  
(02)9780 8688  
(02)4926 2466  
Victoria  
Melbourne  
Unit 1 / 6 Garden Road Clayton 3168  
(03) 8562 6245  
Queensland  
Brisbane  
Southport  
Unit 4 / 305 Montague Road West End 4101  
Shop 1, 48 Ferry Rd, Southport 4215  
(07)3840 5858  
(07)5591 3670  
South Australia  
Adelaide  
84A Richmond Rd, Keswick, 5053  
45 Sarich Court, Osborne Park 6017  
(08)8375 5710  
(08)9445 5901  
Western Australia  
Perth  
For Service in outer areas, please contact your NEC retailer for the address of the nearest  
Authorized NEC Service Centre.  
NEC Australia Pty. Ltd.  
244 Beecroft Road EPPING 2121  
Tel. 131-632 Fax. (02)9930 2380  
34  

Intel Core I7 Quad Core I7 2600k 3 4ghz Desktop Processor BX80623i72600K User Manual
JVC CU VD20AS User Manual
LG Electronics LG Life Good Computer Monitor M2780D User Manual
Panasonic Cordless Telephone KX TG7871 User Manual
Philips 21HT3312 User Manual
Philips 150S8FBJ User Manual
Philips 170X7FB User Manual
Philips 200s4 User Manual
Philips DVP3560K User Manual
Philips Professional 200P3 User Manual