NEC AccuSync AS171 User Manual

AccuSync AS171  
AccuSync AS191  
User’s Manual  
WARNING  
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT  
USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS  
THE PRONGS CAN BE FULLY INSERTED.  
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM  
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE  
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER  
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause  
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.  
This symbol alerts the user that important literature concerning the operation and maintenance of this unit  
has been included. Therefore, it should be read carefully in order to avoid any problems.  
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not  
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the  
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.  
European  
Continental  
Plug Type  
North America  
U.K.  
Chinese  
Japanese  
Plug Shape  
Country  
Voltage  
U.S.A./Canada  
120*  
EU (except U.K.)  
230  
U.K.  
230  
China  
220  
Japan  
100*  
*When operating the AccuSync AS171 / AccuSync AS191 monitor with its AC 125-240V power supply, use a power supply  
cord that matches the power supply voltage of the AC power outlet being used.  
NOTE:  
This product can only be serviced in the country where it was purchased.  
Registration Information  
Declaration  
Declaration of the Manufacturer  
We hereby certify that the color monitor  
AccuSync AS171(L175GZ) / AccuSync  
AS191(L195GY) are in compliance with  
and marked with  
Council Directive 2006/95/EC:  
EN 60950-1  
Council Directive 2004/108/EC:  
EN 55022  
NEC Display Solutions, Ltd.  
4-13-23, Shibaura,  
Minato-Ku  
Tokyo 108-0023, Japan  
EN 61000-3-2  
EN 61000-3-3  
EN 55024  
Council Directive 2009/125/EC:  
EC No.1275/2008  
EN 62301:2005  
English-1  
Canadian Department of Communications Compliance Statement  
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.  
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.  
FCC Information  
1.  
Use the attached specified cables with the AccuSync AS171(L175GZ) / AccuSync AS191(L195GY) color monitor so as  
not to interfere with radio and television reception.  
(1)  
The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,  
and meet the following condition.  
Power supply cord  
Plug shape  
Non shield type, 3-conductor  
U.S.A  
(2)  
Please use the supplied shielded video signal cable.  
Use of other cables and adapters may cause interference with radio and television reception.  
2.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult your dealer or an experienced radio/TV technician for help.  
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.  
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify  
and Resolve Radio-TV Interference Problems.This booklet is available from the U.S. Government Printing Office,  
Washington, D.C., 20402, Stock No. 004-000-00345-4.  
Declaration of Conformity  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not  
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  
undesired operation.  
U.S. Responsible Party: NEC Display Solutions of America, Inc.  
Address:  
500 Park Blvd, Suite 1100  
Itasca, Illinois 60143  
(630) 467-3000  
Tel. No.:  
Type of Product:  
Display Monitor  
Equipment Classification: Class B Peripheral  
Models: AccuSync AS171(L175GZ)  
AccuSync AS191(L195GY)  
We hereby declare that the equipment specified above conforms  
to the technical standards as specified in the FCC Rules.  
Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.  
ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy,  
Norway, Spain, Sweden, U.K.  
All other brands and product names are trademarks or registered trademarks of their respective owners.  
ENERGY STAR is a U.S. registered trademark.  
®
As an ENERGY STAR Partner, NEC Display Solutions of America, Inc. has determined that this product meets the ENERGY STAR  
guidelines for energy efficiency. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.  
English-2  
Recommended use  
Safety Precautions and Maintenance  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE  
THE FOLLOWING WHEN SETTING UP AND  
USING THE ACCUSYNC LCD COLOR MONITOR:  
DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose  
you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel.  
Do not spill any liquids into the cabinet or use your monitor near water.  
Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful  
or fatal or may cause electric shock, fire or equipment failure.  
Do not place any heavy objects on the power cord. Damage to the cord may cause shock or fire.  
Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to  
the monitor.  
When operating the LCD monitor with its AC 125-240V power supply, use a power supply aord that matches the power  
supply voltage of the AC power outlet being used. The power supply cord you use must have been approved by and  
comply with the safety standards of your country. (Type H05VV-F should be used in Europe).  
In U.K, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.  
If a power cord is not supplied with this monitor, please contact your supplier.  
Do not place any objects onto the monitor and do not use the monitor outdoors.  
The lamps in this product contain mercury. Please dispose according to state, local or federal law.  
Do not bend power cord.  
Do not use monitor in high temperature, humid, dusty, or oily areas.  
Do not cover vent on monitor.  
Do not touch LCD panel surface while transporting, mounting and setting. Applying pressure on the LCD panel can  
cause serious damage.  
To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install  
the monitor in a stable location and take measures to prevent falling.  
Immediately unplug your monitor from the wall outlet and refer servicing to qualified service personnel under the following  
conditions:  
When the power supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the monitor.  
If the monitor has been exposed to rain or water.  
If the monitor has been dropped or the cabinet damaged.  
If the monitor does not operate normally by following operating instructions.  
If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.  
If you notice any structural damage such as cracks or unnatural wobbling.  
Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block  
ventilated openings or place the monitor near a radiator or other heat sources. Do not put anything on  
top of monitor.  
CAUTION  
The power cable connector is the primary means of detaching the system from the power supply. The  
monitor should be installed close to a power outlet, which is easily accessible.  
Handle with care when transporting. Save packaging for transporting.  
Image Persistence: Image persistence is when a residual or ghostimage of a previous image remains visible on the  
screen. Unlike CRT monitors, LCD monitorsimage persistence is not permanent, but constant images being displayed for  
a long period of time should be avoided.  
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an  
image was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to  
erase the image.  
NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at  
regular intervals whenever the screen is idle or turning off the monitor when not in use.  
English-3  
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN  
REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE  
FOLLOWING WHEN YOU POSITION THE MONITOR:  
For optimum performance, allow 20 minutes for warm-up.  
Adjust the monitor height so that the top of the screen is at or slightly below eye level.  
Your eyes should look slightly downward when viewing the middle of the screen.  
Position your monitor no closer than 40 cm and no further away than 70 cm from your  
eyes. The optimal distance is 50 cm.  
Rest your eyes periodically by focusing on an object at least 6 m away. Blink often.  
Position the monitor at a 90° angle to windows and other light sources to minimize glare  
and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen.  
If reflected light makes it hard for you to see your screen, use an antiglare filter.  
Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any  
cleaning solution or glass cleaner!  
Adjust the monitors brightness and contrast controls to enhance readability.  
Use a document holder placed close to the screen.  
Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize  
turning your head while you are typing.  
Avoid displaying fixed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).  
Get regular eye checkups.  
Ergonomics  
To realize the maximum ergonomics benefits, we recommend the following:  
Use the preset Size and Position controls with standard signals.  
Use the preset Color Setting.  
Use non-interlaced signals with a vertical refresh rate between 60-75 Hz.  
Do not use primary color blue on a dark background, as it is difficult to see and may produce eye fatigue to insufficient  
contrast.  
Cleaning the LCD Panel  
When the liquid crystal panel becomes dusty or dirty, wipe gently with a soft cloth.  
Do not rub the LCD panel with coarse or hard material.  
Do not apply pressure to the LCD surface.  
Do not use OA cleaner as it will cause deterioration or discoloration to the LCD surface.  
Cleaning the Cabinet  
Unplug the power supply.  
Dampen a soft cloth with water and a neutral detergent. Gently wipe the cabinet then dry gently with a soft cloth.  
NOTE:  
Many plastics are used on the surface of the cabinet. DO NOT clean with benzene, thinner, alkaline detergent,  
alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder or insecticide. Do not touch rubber or  
vinyl to the cabinet for a long period of time. These types of fluids and fabrics can cause the paint to deteriorate,  
crack or peel.  
For more detailed information on setting up a healthy work environment, write to the American National Standard for Human Factors Engineering of Visual  
Display Terminal Workstations - ANSI-HFS Standard No. 100-1988 - The Human Factors Society, Inc. P.O. Box 1369, Santa Monica, California 90406.  
English-4  
Contents  
Your new NEC AccuSync LCD monitor box* should contain the following:  
AccuSync LCD monitor with tilt base  
Power Cord  
Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)  
Setup Manual  
Base Stand  
Cable Holder  
Cable Holder  
S
e
u
tu  
a
p
l
M
a
n
Setup Manual  
Power Cord*1  
Video Signal Cable  
Base Stand  
AccuSync LCD monitor  
(base stand not connected)  
*
Remember to save your original box and packing material to transport or ship the monitor.  
*1 Type of power cord included will depend on the where the LCD monitor is to be shipped.  
Quick Start  
To attach the Base Stand to the LCD Stand:  
1. Attach the Base Stand to the Stand. The locking tabs on the Base Stand should fit  
into the hole on the Stand (Figure S.1).  
To attach the AccuSync LCD monitor to your system, follow these instructions:  
1. Turn off the power to your computer.  
2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not  
included) to the connector of the display card in your system (Figure A.1).  
Tighten all screws.  
For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to  
the connector of the display card in your system (Figure A.2). Tighten all screws.  
Stand  
For the MAC: Connect the Macintosh cable adapter (not included) to the computer  
and then attach the 15-pin mini D-SUB signal cable to the Macintosh cable adapter  
(Figure A.3). Tighten all screws.  
Base Stand  
NOTE:  
Some Macintosh systems do not require a Macintosh cable adapter.  
Figure S.1  
DVI Signal Cable (not included)  
Macintosh Cable Adapter  
(not included)  
Figure A.1  
Figure A.2  
English-5  
Figure A.3  
3. Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on the back of  
the monitor (Figure B.1).  
4. Connect one end of the power cord to the monitor and the other end to the power outlet. Place the Video Signal Cable and  
power cord to the Cable holder (Figure C.1).  
NOTE:  
NOTE:  
Adjust position of cable placed to the Cable holder to avoid damage for cable or monitor.  
Please refer to Caution section of this manual for proper selection of power cord.  
5. Turn on the monitor with the bottom power button and the computer (Figure D.1).  
Power cable  
Input (VGA)  
Input (DVI)  
Power Button  
Figure B.1  
Figure C.1  
Figure D.1  
6. No-touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings.  
For further adjustments, use the following OSD controls:  
Auto Adjust Contrast  
Auto Adjust  
Refer to the Controls section of this Users Manual for a full description of these OSD  
controls.  
NOTE:  
If you have any problem, please refer to the Troubleshooting section of this  
Users Manual.  
Tilt  
Grasp both sides of the monitor screen with your hands and adjust the tilt as desired  
(Figure TS.1).  
Remove Monitor Stand for Mounting  
To prepare the monitor for alternative mounting purposes:  
Figure TS.1  
1. Disconnect all cables.  
2. Place monitor face down on a non-abrasive surface (Figure R.1).  
3. Remove the 4 screws connecting the monitor to the stand and remove the stand as indicated (Figure R.2).  
The monitor is now ready for mounting in an alternative manner.  
4. Connect the AC cord and signal cable to the back of the monitor (Figure R.3).  
5. Reverse this process to re-attach stand.  
NOTE:  
NOTE:  
Use only VESA-compatible alternative mounting method.  
Handle with care when removing monitor stand.  
English-6  
Non-abrasive surface  
Figure R.1  
Figure R.2  
Figure R.3  
Locking tabs  
Removing the Base  
NOTE:  
Always remove the Base when shipping the LCD.  
1. Place monitor face down on a non-abrasive surface (Figure R.1).  
2. While using your thumbs, press the bottom tabs upward to unlock.  
3. Press the top tabs down to unlock and pull off the Base Stand.  
Connecting a Flexible Arm  
This LCD monitor is designed for use with a flexible arm.  
Please use screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be  
mounted to an arm which, guaranties the necessary stability under consideration of the weight of the monitor.  
The LCD monitor shall only be used with an approved arm (e.g. GS mark).  
NOTE:  
The mounting stand shall be able to sustain at least 14 kg (AS171), 16 kg (AS191) and UL certified.  
12 mm  
M4  
Thickness of Bracket  
(Arm) 2.0 ~ 3.2 mm  
4 x 12 mm with lock washer  
and flat washer  
Tighten all screws  
100 mm  
Specifications  
4-SCREWS (M4)  
100 mm  
(MAX depth: 10 mm)  
If use other screw,  
check depth of hole.  
Weight of LCD assembly: AS171: 3.5 kg (MAX)  
AS191: 4.0 kg (MAX)  
English-7  
Controls  
OSD (On-Screen Display) control buttons on the front of the monitor function  
as follows:  
1. Basic function at pressing each key  
Button  
At No OSD  
showing  
Shortcut to Bright adjust  
window.  
Shortcut to Contrast adjust  
window.  
Input signal select.  
Reset operation.  
Showing OSD.  
At OSD showing  
(Icon selection stage)  
Go to Adjustment stage.  
Cursor goes to left.  
Cursor goes to right.  
At OSD showing Go to Icon selection stage.  
(Adjustment stage)  
Adjust value decrease or  
Cursor for adjust goes to left. Cursor for adjust goes to  
right.  
Adjust value increase or  
2. OSD structure  
Main Menu (Icon Select)  
Main Menu (Adjust)  
Press  
SELECT”  
key  
Press  
SELECT”  
key  
Press SELECTkey  
Adjust by using  
“–” or +”  
Example Tool:  
Press SELECTkey  
Press  
SELECTkey  
Press  
“–” or +”  
Press  
“–” or +”  
Press  
SELECTkey  
Sub Menu (Icon Select)  
Adjust by using  
“–” or +”  
Sub Menu (Adjust)  
English-8  
BRIGHTNESS  
Adjusts the overall image and background screen brightness.  
To enter ECO MODE, press the 1 2/RESETbutton.  
ECO MODE OFF: Sets brightness variable to 100%  
ECO MODE1: Sets brightness to 80%.  
This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.  
ECO MODE2: Sets brightness to 30%.  
This setting can adjust brightness to a range in which power is reduced by 30% compared to the maximum brightness setting.  
CONTRAST  
Adjusts the image brightness in relation to the background.  
AUTO CONTRAST  
Adjusts the image displayed for non-standard video inputs. (Analog input only)  
AUTO ADJUST  
Automatically adjusts the Image Position, the H. Size and Fine setting. (Analog input only)  
LEFT/RIGHT  
Controls Horizontal Image Position within the display area of the LCD. (Analog input only)  
DOWN/UP  
Controls Vertical Image Position within the display area of the LCD. (Analog input only)  
H. SIZE  
Adjusts the horizontal size by increasing or decreasing this setting. (Analog input only)  
FINE  
Improves focus, clarity and image stability by increasing or decreasing this setting. (Analog input only)  
COLOR CONTROL SYSTEMS  
Five color presets (9300/7500/sRGB/USER/NATIVE) select the desired color setting.  
COLOR RED  
Increase or decreases Red. The change will appear on screen.  
COLOR GREEN  
Increase or decreases Green. The change will appear on screen.  
COLOR BLUE  
Increase or decreases Blue. The change will appear on screen.  
TOOL  
Selecting TOOL allows you to get into the sub menu.  
FACTORY PRESET  
Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. The 1 2/RESET  
button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting  
the control to be reset and pressing the 1 2/RESET button.  
EXIT  
Selecting EXIT allows you exit OSD menu/ sub menu.  
LANGUAGE  
OSD control menus are available in nine languages.  
English-9  
OSD TURN OFF  
The OSD control menu will stay on as long as it is in use. In the OSD Turn OFF submenu, you can select how  
long the monitor waits after the last touch of a button to shut off the OSD control menu. The preset choices are  
10 - 120 seconds by 5-second steps.  
OSD LOCK OUT  
This control completely locks out access to all OSD control functions with the exception of Brightness and Contrast.  
When attempting to activate OSD controls while in the Lock Out mode, a screen will appear indicating the OSD is  
locked out. To activate the OSD Lock Out function, press 1 2/RESET, then +button and hold down  
simultaneously. To de-activate the OSD Lock Out, press 1 2/RESET, then +button and hold down simultaneously.  
RESOLUTION NOTIFIER  
If ON is selected, a message will appear on the screen after 30 seconds, notifying you that the resolution is not at  
optimal resolution.  
DDC/CI  
Turns ON or OFF the two way communication and control of the monitor.  
MONITOR INFO  
Indicates the model and serial numbers of your monitor.  
CARBON SAVINGS  
Display the estimated carbon saving information in kg.  
The carbon footprint factor in the carbon saving calculation is based on the OECD (2008 Edition).  
The carbon saving information can be reset by pressing the 1 2/RESET button.  
OSD Warning  
OSD Warning menus disappear with SELECT button.  
NO SIGNAL: This function gives a warning when there is no signal present. After power is turned on or when there is  
a change of input signal or video is inactive, the No Signal window will appear.  
RESOLUTION NOTIFIER: This function gives a warning of use with optimized resolution. After power is turned on or  
when there is a change of input signal or the video signal doesnt have proper resolution, the Resolution Notifier  
window will open. This function can be disabled in the TOOL menu.  
OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power  
is turned on or there is a change of input signal or the video signal doesnt have proper timing, the Out Of Range  
menu will appear.  
English-10  
Specifications  
Monitor Specifications  
AccuSync AS171 Monitor  
Notes  
LCD Module  
Diagonal: 43.2 cm/17.0 inches  
Viewable Image Size: 43.2 cm/17.0 inches  
Active matrix, thin film transistor (TFT)  
liquid crystal display (LCD); 0.264 mm dot  
pitch; 250 cd/m2 white luminance, 900:1  
contrast ratio, typical.  
Native Resolution (Pixel Count): 1280 x 1024  
Input Signal  
15pin Mini D-sub: Analog RGB  
Sync  
0.7 Vp-p/75 ohms  
Separate sync. TTL level (Positive/Negative)  
DVI(HDCP)  
DVI-D Digital RGB  
Display Colors  
Viewing Angle  
Analog input: 16.7 M  
Depends on display card used.  
Left/Right: -80°/+80° (CR>10)  
Up/Down: -80°/+80° (CR>10)  
Synchronization Range  
Horizontal: 31.5 kHz to 81.1 kHz  
Vertical: 56 Hz to 76 Hz  
Automatically  
Automatically  
Resolutions Supported Landscape: 720 x 400*1: VGA text  
Some systems may not support all  
modes listed.  
640 x 480*1 at 60 Hz to 75 Hz  
800 x 600*1 at 56 Hz to 75 Hz  
832 x 624*1 at 75 Hz  
1024 x 768*1 at 60 Hz to 75 Hz  
1152 x 864*1 at 75 Hz  
1152 x 870*1 at 75 Hz  
1280 x 960*1 at 60 Hz to 75 Hz  
Recommended resolution is 60 Hz for  
1280 x 1024 at 60 Hz to 75 Hz.....................optimal display performance.  
Horizontal: 337.9 mm  
Vertical: 270.3 mm  
100 - 240 V ~ 50/60 Hz  
0.5 - 0.3 A  
Maximun Operation: 22 W  
Normal Operation: 18 W  
Active Display Area  
Power Supply  
Current Rating  
Power  
Consumption  
Dimensions  
Landscape: 373.2 mm (W) x 373.1 mm (H) x 205.1 mm (D)  
14.7 inches (W) x 14.7 inches (H) x 8.1 inches (D)  
Weight  
3.9 kg (8.6 lbs)  
Environmental Considerations  
Operating Temperature: 5°C to 35°C/41°F to 95°F  
Humidity: 20% to 80%  
Altitude: 0 to 2,000 m/0 to 6,562 Feet  
Storage Temperature: -10°C to 60°C/14°F to 140°F  
Humidity: 10% to 85%  
Altitude: 0 to 12,192 m/0 to 40,000 Feet  
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is  
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on  
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.  
NOTE:  
Technical specifications are subject to change without notice.  
English-11  
Specifications  
Monitor Specifications  
AccuSync AS191 Monitor  
Notes  
LCD Module  
Diagonal: 48.3 cm/19.0 inches  
Viewable Image Size: 48.3 cm/19.0 inches  
Active matrix, thin film transistor (TFT)  
liquid crystal display (LCD); 0.294 mm dot  
pitch; 250 cd/m2 white luminance, 900:1  
contrast ratio, typical.  
Native Resolution (Pixel Count): 1280 x 1024  
Input Signal  
15pin Mini D-sub: Analog RGB  
Sync  
0.7 Vp-p/75 ohms  
Separate sync. TTL level (Positive/Negative)  
DVI(HDCP)  
DVI-D Digital RGB  
Display Colors  
Viewing Angle  
Analog input: 16.7 M  
Depends on display card used.  
Left/Right: -80°/+80° (CR>10)  
Up/Down: -80°/+80° (CR>10)  
Synchronization Range  
Horizontal: 31.5 kHz to 81.1 kHz  
Vertical: 56 Hz to 76 Hz  
Automatically  
Automatically  
Resolutions Supported Landscape: 720 x 400*1: VGA text  
Some systems may not support all  
modes listed.  
640 x 480*1 at 60 Hz to 75 Hz  
800 x 600*1 at 56 Hz to 75 Hz  
832 x 624*1 at 75 Hz  
1024 x 768*1 at 60 Hz to 75 Hz  
1152 x 864*1 at 75 Hz  
1152 x 870*1 at 75 Hz  
1280 x 960*1 at 60 Hz to 75 Hz  
Recommended resolution is 60 Hz for  
1280 x 1024 at 60 Hz to 75 Hz.....................optimal display performance.  
Horizontal: 376 mm  
Vertical: 301 mm  
100 - 240 V ~ 50/60 Hz  
0.5 - 0.3 A  
Maximun Operation: 24 W  
Normal Operation: 20 W  
Active Display Area  
Power Supply  
Current Rating  
Power  
Consumption  
Dimensions  
Landscape: 412.5 mm (W) x 403.1 mm (H) x 205.1 mm (D)  
16.2 inches (W) x 15.9 inches (H) x 8.1 inches (D)  
Weight  
4.4 kg (9.7 lbs)  
Environmental Considerations  
Operating Temperature: 5°C to 35°C/41°F to 95°F  
Humidity: 20% to 80%  
Altitude: 0 to 2,000 m/0 to 6,562 Feet  
Storage Temperature: -10°C to 60°C/14°F to 140°F  
Humidity: 10% to 85%  
Altitude: 0 to 12,192 m/0 to 40,000 Feet  
*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is  
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on  
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.  
NOTE:  
Technical specifications are subject to change without notice.  
English-12  
Features  
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and weight  
limitations. The small footprint and light weight allow it to be moved or transported easily from one location to another.  
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor to  
a variety of standards.  
OSD (On-Screen Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple to  
use on-screen menus.  
NaViSet software: Offers an expanded and intuitive graphical interface, allowing you to more easily adjust OSD display  
settings via mouse and keyboard.  
No Touch Auto Adjust: No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup.  
ErgoDesign Features: Enhance human ergonomics to improve the working environment, protect the health of the user and  
save money. Examples include OSD controls for quick and easy image adjustments, tilt base for preferred angle of vision,  
small footprint and compliance with MPRII and TCO guidelines for lower emissions.  
Plug and Play: The Microsoft solution with the Windows operating system facilitates setup and installation by allowing the  
monitor to send its capabilities (such as screen size and resolutions supported) directly to your computer, automatically  
optimizing display performance.  
IPM (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a  
lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions  
and lowering the air conditioning costs of the workplace.  
Multiple Frequency Technology: Automatically adjusts monitor to the display cards scanning frequency, thus displaying the  
resolution required.  
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.  
VESA Standard Mounting Interface: Allows users to connect their AccuSync monitor to any VESA standard third party  
mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device.  
Environmental Impact (AS171): Annual typical maximum operating carbon footprint of this monitor (world-wide average) is  
approximately 20.0 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-  
Carbon conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition).  
This monitor has a manufacturing carbon footprint of approximately 13.5 kg.  
Environmental Impact (AS191): Annual typical maximum operating carbon footprint of this monitor (world-wide average) is  
approximately 21.8 kg (calculated by: rated wattage x 8 hours per day x 5 days a week x 45 weeks per year x Power-to-  
Carbon conversion factor - conversion factor is based on OECD publication of global CO2 emissions 2008 Edition).  
This monitor has a manufacturing carbon footprint of approximately 15.6 kg.  
Note: The manufacturing and operating carbon footprints are calculated by a unique algorithm developed exclusively by NEC  
for its monitors.  
English-13  
Troubleshooting  
No picture  
The signal cable should be completely connected to the display card/computer.  
The display card should be completely seated in its slot.  
Check front power Switch and computer power switch should be in the ON position.  
Check to make sure that a supported mode has been selected on the display card or system being used. (Please  
consult display card or system manual to change graphics mode.)  
Check the monitor and your display card with respect to compatibility and recommended settings.  
Check the signal cable connector for bent or pushed-in pins.  
Check the signal input.  
Power Button does not respond  
Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.  
Image persistence  
Image persistence is when a ghostof an image remains on the screen even after the monitor has been turned off.  
Unlike CRT monitors, LCD monitorsimage persistence is not permanent, but constant images being displayed for a  
long period of time should be avoided.  
To alleviate image persistence, turn the monitor off for as long as an image was displayed. For example, if an image  
was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase  
the image.  
NOTE:  
As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a screen saver at regular  
intervals whenever the screen is idle or turning off the monitor when not in use.  
Image is unstable, unfocused or swimming is apparent  
Signal cable should be completely attached to the computer.  
Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine total. When the  
display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.  
Check the monitor and your display card with respect to compatibility and recommended signal timings.  
If your text is garbled, change the video mode to non-interlace and use 60 Hz refresh rate.  
Picture is not as bright  
Make sure ECO MODE is turned off.  
LED on monitor is not lit (no green or amber color can be seen)  
Power Switch should be in the ON position and power cord should be connected.  
Display image is not sized properly  
Use the OSD Image Adjust controls to increase or decrease the H.SIZE.  
Check to make sure that a supported mode has been selected on the display card or system being used.  
(Please consult display card or system manual to change graphics mode.)  
No Video  
If no video is present on the screen, turn the Power button off and on again.  
Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).  
English-14  
TCO Displays 5.0  
Congratulations!  
This display is designed for both you and the planet!  
The display you have just purchased carries the TCO  
Certified label. This ensures that your display is designed,  
manufactured and tested according to some of the strictest  
quality and environmental requirements in the world.  
This makes for a high performance product, designed with  
the user in focus that also minimizes the impact on the  
climate and our natural environment.  
TCO Certified is a third party verified program, where every product model is tested by an  
accredited impartial test laboratory. TCO Certified represents one of the toughest certifications  
for displays worldwide.  
Some of the Usability features of the TCO Certified for displays:  
• Good visual ergonomics and image quality is tested to ensure top performance and reduce  
sight and strain problems. Important parameters are luminance, contrast, resolution, black level,  
gamma curve, color and luminance uniformity, color rendition and image stability.  
• Product have been tested according to rigorous safety standards at an impartial laboratory.  
• Electric and magnetic fields emissions as low as normal household background levels.  
• Low acoustic noise emissions.  
Some of the Environmental features of the TCO Certified for displays:  
• The brand owner demonstrates corporate social responsibility and has a certified  
environmental management system (EMAS or ISO 14001).  
Very low energy consumption both in on- and standby mode minimize climate impact.  
• Restrictions on chlorinated and brominated flame retardants, plasticizers, plastics and  
heavy metals such as cadmium, mercury and lead (RoHS compliance).  
• Both product and product packaging is prepared for recycling.  
• The brand owner offers take-back options.  
The requirements can be downloaded from our web site. The requirements included in this  
label have been developed by TCO Development in co-operation with scientists, experts,  
users as well as manufacturers all over the world. Since the end of the 1980s TCO has been  
involved in influencing the development of IT equipment in a more user-friendly direction.  
Our labeling system started with displays in 1992 and is now requested by users and IT-  
manufacturers all over the world. About 50% of all displays worldwide are TCO certified.  
For more information, please visit  
English-15  
Manufacturer’s Recycling and Energy Information  
NEC DISPLAY SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the companys  
top priorities in trying to minimize the burden placed on the environment. We are engaged in developing environmentally-  
friendly products, and always strive to help define and comply with the latest independent standards from agencies such as  
ISO (International Organisation for Standardization) and TCO (Swedish Trades Union).  
Disposing of your old NEC product  
The aim of recycling is to gain an environmental benefit by means of re-use, upgrading, reconditioning or reclamation of  
material. Dedicated recycling sites ensure that environmentally harmful components are properly handled and securely  
disposed. To ensure the best recycling of our products, NEC DISPLAY SOLUTIONS offers a variety of recycling  
procedures and gives advice on how to handle the product in an environmentally sensitive way, once it has reached the end  
of its life.  
All required information concerning the disposal of the product and country-specific information on recycling facilities can be  
found on our following websites:  
Energy Saving  
This monitor features an advanced energy saving capability. When a VESA Display Power Management Signalling (DPMS)  
Standard signal is sent to the monitor, the Energy Saving mode is activated. The monitor enters a single Energy Saving mode.  
AS171  
Mode  
Power consumption (typ.)  
LED color  
Blue  
Maximum Operation  
Normal Operation  
Energy Saving Mode  
Off Mode  
22 W  
18 W Default setting  
0.40 W  
Blue  
Amber  
Unlit  
0.35 W  
AS191  
Mode  
Power consumption (typ.)  
LED color  
Blue  
Maximum Operation  
Normal Operation  
Energy Saving Mode  
Off Mode  
24 W  
20 W Default setting  
0.40 W  
Blue  
Amber  
Unlit  
0.35 W  
WEEE Mark (European Directive 2002/96/EC)  
Within the European Union  
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic  
products carrying the mark (left) must be disposed of separately from normal household waste. This includes  
monitors and electrical accessories, such as signal cables or power cords. When you need to dispose of your  
NEC display products, please follow the guidance of your local authority, or ask the shop where you  
purchased the product, or if applicable, follow any agreements made between yourself and NEC.  
The mark on electrical and electronic products only applies to the current European Union Member States.  
Outside the European Union  
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local  
authority so as to comply with the correct disposal method.  
English-16  

Intel Dual Band Wireless AC 7260 7260HMWDTX1 User Manual
JVC XL PG300B User Manual
Kenwood Computer Monitor DDX4033M User Manual
LG Electronics LG Life Good Computer Monitor E2051C User Manual
Philips 28ST1687 User Manual
Philips 190TW9FB User Manual
Philips Business 150B3Q User Manual
Philips Cooktop HD4929 User Manual
Philips Cordless Telephone SE170 User Manual
Philips Designer 32PT6441 User Manual