User's Guide
DIGITAL CORDLESS
TELEPHONE
WITH *CALLER ID
Model ME4050 Series
Digital 1.8 GHz
MOTOROLA and the Stylized M Logo are registered in the US Patent & Tradem ark Office. All other product or service nam es are the
property of their respective owners. © Motorola, Inc. 2004.
Contents
Welcom e
Contents
1
Selecting the Language
17
17
18
18
18
19
19
19
19
20
20
20
21
21
Making Internal Calls
Making External Calls
Direct dialing
On-hook dialing
Taking Calls
Handset is in the Base Station
Handset is not in the Base Station
Prefix Dialing
Dialing from the Phone Book
Call Log Operations
3
Im portant Safety Instructions
Technical Am endm ents
5
7
Installation
Package Contents
Setting up the Base Station and Charger Unit
Connecting the Base Station and Mains Adaptor
Connecting the Charger Unit
Inserting the Batteries
8
8
8
9
10 Browse, Call Back, Delete, Save
10 Muting the Microphone
11 Holding Calls / Forwarding Calls
11 Access a Call Waiting Line / Holding and
transferring calls (PABX)
Attaching the Headset
Technical Data
21
21
Features
12 Changing the Handset Volum e -----------------
Teleconference and
Intercom Call Transfering
Entering a Dialing Pause (P)
Control Buttons
Control Buttons
Control Buttons (on Charger)
13
13
14
22
22
Phone Book
Phone Book
Store Entries
View Entries
Edit Entries
Delete Entries
23
23
23
23
24
25
Menu Structure
15
Using the Telephone
Switching the Handset On / Off
17
17
3
Contents
Handset Settings
Changing the Ringer Volum e
26
26
Changing the Ringer Melody (external / internal)
Entering / Changing Handset Nam e
Saving a Prefix
26
26
27
27
Switching the Key Tone On / Off
Activating / Deactivating Autom atic Call Answering 28
Activating / Deactivating Call Tim er
Default Settings
Registering Additional Handsets
29
29
30
Base Station Settings
Barring Calls
Entering / Changing Em ergency Num ber
Changing the Flash Tim e
Select Dial Mode
Changing the PIN
Default Settings
Delete HS
31
31
31
32
33
33
34
34
Quick Reference
Operation
Phone Book
Handset Settings
Base Settings
35
35
37
38
39
Warranty
40
4
Im portant Safety Instructions
Follow these safety precautions when using your cordless phone to reduce the risk
of fire, electric shock and injury to persons or property:
Reduce risk of fire and shock by:
1. Keep all slits and openings of the phone unblocked. Do not set the phone on a
heating register or over a radiator. Ensure that proper ventilation is provided at
the installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for exam ple, near a bath tub, kitchen sink, or
swim m ing pool).
4. Do not allow anything to rest on the power cord. Place the power cord so that it
will not be walked on.
5. Never insert objects of any kind into the product slits as that m ay result in fire or
shock.
6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a dam p cloth for cleaning.
7. Do not disassem ble this product. If service or repair work is required, contact the
Warranty Service phone num ber found in the back of this user's guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm . Use a surge protector to protect the
equipm ent.
10.Do not use this cordless phone to report a gas leak, especially if you are in the
vicinity of the gas line.
5
Unplug this cordless phone im m ediately from an outlet if:
The power cord or plug is dam aged or frayed.
Liquid has been spilled into the product.
The product has been exposed to rain or water. Do not retrieve the handset or base
until after you have unplugged the power and phone from the wall. Then retrieve
the unit by unplugged cords.
The product has been dropped or the cabinet has been dam aged.
The product exhibits a distinct change in perform ance.
Installation Guidelines
1. Read and understand all instructions and save them for future reference.
2. Follow all warnings and instructions m arked on the product.
3. Do not install this product near a bath tub, sink or shower.
4. Operate this phone using only the power source that is indicated on the m arking
label. If you are unsure of the power supply to your hom e, consult with your dealer
or local power com pany.
5. Do not place this product on an unstable cart, stand or table. This product m ay
fall, causing serious dam age to the product.
6. Adjust only those controls that are covered by the operating instructions. Im proper
adjustm ent of other controls m ay result in dam age and will often require extensive
work to restore the product to norm al operation.
7. Clean this product with a soft, dam p cloth. Do not use chem icals or cleaning agents
to clean this phone.
6
8. Use only the power supply that cam e with this unit. Using other power supplies
m ay dam age the unit.
9. Because cordless phones operate on electricity, you should have at least one phone
in your hom e that isn't cordless, in case the power in your hom e goes out.
10.To avoid interference to nearby appliances, do not place the base of the cordless
phone on or near a TV, m icrowave oven, or VCR.
11.It is im possible to m ake em ergency calls when the keypad lock is enabled.
Technical Am endm ents
These Operating Instructions are issued for inform ation purposes. Their
content is not the subject of a contract.
All indicated data are m erely nom inal values. The described equipm ent and
options m ay differ depending on requirem ents which are specific to each
country.
This device is dedicated to be used in the analog public switched telecom unication
network (PSTN).
7
Package Contents
ME4050-1
ME4050-2
ME4050 -3
ME4050-4
Single Pack Twin Pack Triple Pack Quad Pack
Base Station
1
1
1
1
2
1
2
2
1
4
1
3
3
1
6
1
4
4
1
8
Mobile Handset
Mains Adaptor
Telephone Line Cord
Rechargeable Batteries
type m icro AAA
Charger Unit
0
1
1
1
2
1
3
1
User's Guide
Please check the contents of the package carefully. If som ething is m issing or has
becom e dam aged in transit, you should NOT use the telephone. In such a case you
should return to the dealer with your sales receipt or contact the Motorola's distributor
directly. (For details, please refer to the Warranty section.)
Note: Retain the packaging of your appliance to prevent it from being dam aged should
you ever need to return it.
Setting up the Base Station and Charger Unit
Place the base station and charger unit in an easily accessible location. Make sure
that the location is stable and flat and that the surface is non-slip. When choosing
the location, also m ake sure that all cables can be routed so as to prevent people
tripping over them . Furtherm ore, avoid placing the base station and charger unit in
the im m ediate vicinity of other electronic appliances such as m icrowaves, PCs or Hi-
Fi's, for exam ple.
8
Do not expose the base station and charger unit to direct sunlight. Do
not allow the base station and charger unit to becom e wet. They should
not be set up in room s which are subject to condensation or corrosive
steam or a high concentration of dust (e.g. cellars, garages or
conservatories). The room tem perature m ust be between 00C and 350C.
Connecting the Base Station and Mains Adaptor
Insert the plug in the corresponding socket of the base station (it is not possible to
m ix them up as the socket and plug are designed to be reverse-polarity protected).
Route the cable beneath the telephone towards the back. Insert the plug into the
socket of the telephone plug of your telephone connection. Insert the m ains adaptor
in the wall socket. The base station is now ready for use.
The base station does not
have a power switch. Make
sure that there is a m ains
socket nearby and that the
m ains adaptor is easily
accessible. Check that the
voltage indicated on the
m ains adaptor corresponds
to that of your m ains
current.
9
Open the battery com partm ent, by pushing downwards on the cover.
Insert the 2 x AAA (600m Ah/1.2V) Ni-MH re-chargeable batteries supplied,
observing the correct polarity.
CAUTION : PLEASE DO NOT USE ALKALINE OR NON- RECHARGEABLE
BATTERIES. IT MAY CAUSE PERMANENT DAMAGE TO THE
UNIT AND VOID THE WARRANTY.
10
Attaching the Headset
You can connect headsets to the mobile handset.
The 2.5mm jack plug must be inserted fully into the
jack socket on the right-hand side of the handset.
Technical Data
Receiver impedance
Microphone impedance 1.4Ω
Receiver output power
Plug
Microphone sensitivity
32Ω
60mW
2.5mm jack plug
-54dB
11
Note: The headset is not included as standard.
Features
Congratulations on your purchase of this high quality, cordless telephone set.
The set offers the following features:
Standards
*
*
Caller ID on Call Waiting
(dependent on network)
Programmable call block
Operation with 2 standard AAA
re-chargeable batteries
* user must subscribe to the network's caller id service.
+ more then one handset required.
+
+
12
1. Display
2. Delete input
Control Buttons
3. Arrow keys for navigation in the m enu, Menu key and
Redial key
4. Phone book
5. Take call / End call key
6. Digit keys with letter im print
7. Key lock
8. LED : Battery charging indicator
9. LED : Flashes with incom ing calls.
Flashes with calls not taken
10. Paging key (call handset)
11. Microphone
1
2
3
4
15
14
13
12. Key to view CALL LOG m em ory
13. Muting function
5
14. R (Flash) key, Access a Call Waiting Line / Hold
and transfer calls when connected to PABX
15. OK key to confirm and for internal calls
6
7
Display icons
12
11
Indicates the battery charge status. Flashes when battery
is em pty.
Indicates that the outside line is engaged.
Indicates an incom ing, external call.
Indicates an incom ing, internal call.
Flashes in the case of calls not taken (entries still available
in the caller list).
10
9
8
Key input lock is active.
Indicates that the m icrophone m uting is active.
Indicates the external ringing tone is deactivated.
Lights up when the handset is registered on the base.
Flashes if there is no radio com m unication contact.
Indicates that further entries are present.
13
Control Buttons (on Charger)
1
1. Handset
2. Menu sym bol
3.
Charge contacts
4. Charging indicator
5. Charging station
2
3
4
5
14
1-CALL LOG
2-PHONE BOOK
1-NEW ENTRY
2-LIST ENTRY
3-EDIT ENTRY
4-DELETE
ENTER NO ENTER NAME NORMAL RING
VIP RING 1-10
5-DELETE ALL
CONFIRM?
3-HANDSET
1-RINGER
1-VOLUME
[-----]
2-EXT RINGER
3-INT RINGER
MELODY 1-10
MELODY 1-10
2-HS NAME
3-PREFIX MEM
4-KEY TONE
5-AUTO ANS
6-CALL TIMER
7-DEFAULT
ON / OFF
ON / OFF
ON / OFF
CONFIRM?
SEARCHING
8-REGISTER
Note:
Navigate in the m enu structure as follows:
Press the Menu key.
Then use the arrow keys to navigate through the m enu or select the required m enu
item directly using the digit keys.
Exam ple: Enter MENU > 3 > to access '1-RINGER' > '2-HS NAME', then enter the HS
Nam e.
15
4-BASE
1-BARRING
ENTER PIN
HANDSET 1-4
DISABLE
EXTERNAL
NUMBER
ENTER NO
2-EMERGENCY
3-RINGER
ENTER PIN
[-----]
1-
2-
MELODY 1---
MELODY 10
4-FLASH TIME
5-DIAL MODE
100/250/600
TONE
PULSE
6-CHANGE PIN
7-DEFAULT
ENTER PIN
ENTER PIN
NEW PIN
CONFIRM?
REPEAT
8-DEREGISTER
ENTER PIN
HANDSET 1-4
CONFIRM?
5-LANGUAGE
ENGLISH
DEUTSCH
ITALIANO
FRANCAIS
ESPANOL
NEMET
NEDERLANDS
POLSKI
SVENSKA
TURKCE
16
Sw itching the Handset On/ Off
When the handset is placed on the base station or charging unit, it switches on
autom atically and starts to charge up. Allow the batteries to be charged for 14 hours
without interruption the first tim e they are charged. The telephone does not have an
On/Off switch.
Selecting the Language
Ten different languages are available for selection for each handset.
Proceed as follows to select a language:
1. Press the
2. Press the
3. Press
key repeatedly until m enu item LANGUAGE appears.
key to confirm the item .
or
as often as necessary to select the required language.
key to confirm the selection.
4. Press the
Making Internal Calls
If m ore than one handset is registered on the base station,
internal calls can be m ade free of charge.
17
1. Press the
2. Press the num ber of the required handset (1..4).Carry out the conversation.
3. Press the key to end the call.
key.
Note: If an external call is received during an internal
call, short acoustic signals are issued (call waiting).
Making External Calls
There are two ways to dial a num ber, nam ely direct dialing or on-hook dialing.
Direct dialing
1. Press the
key and wait for the dialing tone.
2. Dial the telephone num ber and com plete the call.
3. Press the
key to end the call.
On-hook dialing
1. Dial the telephone num ber.
2. Delete any incorrect entries by pressing the
key.
3. Press the
connection established. Carry out the conversation.
4. Press the key to end the call.
key. The num ber entered is dialed and a
18
Taking Calls
When an external call is received, all the handsets registered and the base station
ring.
Handset is in the base station
1. Take the handset from the base station; a connection is autom atically established
(when the AUTO ANS function is active). Otherwise, press the
2. Carry out the conversation.
key.
3. Press the
key to end the call.
Handset is not in the base station
1. Press the
2. Press the
key. Carry out the conversation.
key to end the call.
Prefix Dialing
1. Press the 0 key for two seconds.
2. Supplem ent the call num ber and press the
.
key to establish a connection.
Note: The prefix number (e.g. an access code) must have been programmed beforehand.
Refer to "Handset Settings".
19
Dialing from the Phone Book
1. Press the
key; the first entry in the phone book appears.
2. Press the
or key to select the required subscriber from the phone book.
Alternatively, enter the first letter of the nam e required.
3. Press the key. The num ber is dialed. Carry out the conversation.
Call Log Operations
Brow se, Call Back, Delete, S ave
If calls have been received in your absence, these are collected in the CALL LOG
m em ory when your telephone service has enabled this function.
Press the
2. Press the
3. Press the
key as often as necessary until the CALL LOG m enu appears.
key. Alternatively, press and hold the key.
keys to browse through the CALL LOG m em ory.
key to return the call.
1.
or
4. Press the
Or
5. Press and hold the
is m ade using the
Or
key two seconds to delete one or all the entries. Selection
key. Press the key.
or
6. Press the
key to enter the subscribers in the phone book.
7. Enter the nam e.
8. Press the
key.
key to select the norm al ring or VIP ring.
key.
9. Press the
10.Press the
or
20
Note: 1. The CALL LOG sym bol and display indicator only disappear after browsing
through all the entries. 2. It is only possible to enter subscribers in the phone book
who are not already entered.
Muting the Microphone
1. Press the
key to switch the m icrophone on
or off during a call.
Access a CallWaiting Line / Holding and transferring calls (PABX)
When on an external call, press
the call waiting prom pt signal. Press
key to access a Call Waiting Line when you hear
key again to toggle between the two calls.
When on an external call (PABX line)
1. Press
key to put the call on hold.
2. Dial the num ber of the extension.
3. Press
the call.
key again if you would like to take back the call, or
to transfer
Note: If several handsets are registered on the base station and a call should be put on
hold or transferred, press the key instead of
21
.
Teleconference and Intercom Call Transfering
After having received an external call, it is possible to include
a second handset in the conversation (three-way conference).
1. Press the
key and enter the num ber of the
corresponding handset (e.g. 2) which should be included in the call.
2. The external caller is kept on hold. As soon as handset 2 takes the call, press
key to transfer the call to handset 2.
Or
3. The external caller is kept on hold. as soon as handset 2 takes the call, press and
hold
key to activate the teleconference.
key, any of the handsets can be disconnected from the
4. By pressing the
teleconference and the other handset continues with the external call.
Entering a Dialing Pause (P)
If the MOTOROLA telephone is connected to a PBX system , it m ay be
necessary to insert a dialing pause. To do this, press the
relevant digit, e.g. 0, for an outside line (0P....). A 'P' appears in the display indicating
a pause. The pause can also be entered when program m ing num bers in the phone
book.
key after entering the
22
Phone Book
The MOTOROLA telephone can store up to 30 entries in the phone book with nam e
and call num ber.
Store Entries
1. Press the
2. Press the
3. Press the
key as often as necessary until the PHONE BOOK m enu appears.
key.
key.
4. Enter the num ber (m ax. 25 digits).
5. Press the key.
6. Enter the nam e (m ax.10 characters).
Note: To enter the characters, press the relevant key the corresponding num ber of
tim es, 1, 2, 3 or 4 tim es, according to the position on the key. Press the 5 key three
tim es for an L. Delete incorrect entries by pressing the
7. Press the key.
8. Select the ringing tone with the
key.
or
key.
9. Press the
key.
ressing the
key.
View Entries
1.
Press the
key repeatedly until PHONE BOOK appears.
23
2. Press the
3. Press the
4. Press the
5. Press the
key.
or
or
key to select LIST ENTR. Y.
key.
key to select the required entry.
Note: if there is no entry in the phone book, "MEM EMPTY" will display.
6. Press the
Or
key to view the num ber.
Press the
key to dial the num ber.
Edit Entries
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
key repeatedly until PHONE BOOK appears.
key.
or
key to select EDIT ENTRY.
key.
or
key to select the required entry.
Note: if there is no entry in the phone book, "MEM EMPTY" will display
6. Press the
7. Enter the num ber.
8. Press the
9. Enter the nam e.
10 Press the
key.
key.
key.
11.Press the
24 12.Press the
or
key to select the norm al ring or VIP ring.
key.
Delete Entries
1. Press the
2. Press the
3. Press the
key as often as necessary until the PHONE BOOK m enu appears.
or
or
key to select DELETE / DELETE ALL.
key to select the phone book entry. Alternatively, enter the
first letter of the nam e required.
4. Press the key to confirm the input.
Note: The delete process can be stopped at any tim e prior to confirm ation of it by
pressing the key several tim es. if all the entries should be deleted, select DELETE
ALL instead of DELETE at Pt. 2.
25
Changing the Ringer Volum e
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
key repeatedly until HANDSET appears.
key twice.
or
or
key to select VOLUME.
key.
key to select the ringer volum e.
(0-5 level, level 0 m eans ringer off)
6. Press the key to confirm the setting.
Changing the Ringer Melody (external/ internal)
1. Press the
2. Press the
3. Use the
4. Press the
5. Use the
6. Press the
key as often as necessary until the HANDSET m enu appears.
key twice.
or key to select the required subm enu (EXT RINGER or INT RINGER).
key.
or
key to select the required m elody.
key to confirm the setting.
Entering/ Changing Handset Nam e
It is possible to assign a nam e to each handset. This nam e is then displayed when
the phone is in Standby m ode.
26
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the HS NAME subm enu.
key.
5. Enter/Change the nam e of the handset (e.g. MOBIL 1).
Note: To enter the characters, press the relevant key the corresponding num ber of
tim es, 1, 2, 3 or 4 tim es, according to the position on the key. Press the
5 key three tim es for an L, for exam ple.
6. Press the
key to confirm the input.
Saving a Prefix
It is possible to save prefix num bers in the handset. This num ber is then recalled after
pressing the 0 key for two seconds.
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the PREFIX MEM subm enu.
key.
5. Enter the prefix number (e.g. access code of the subscriber you call most frequently).
6. Press the key to confirm the input.
Sw itching the Key Tone On/ Off
1. Press the
2. Press the
key as often as necessary until the HANDSET m enu appears.
key.
27
3. Press the
4. Press the
5. Press the
6. Press the
or
or
key to select the KEY TONE.
key.
key to select the setting.
key to confirm the input.
Activating/ Deactivating Autom atic Call Answ ering
The automatic call answering function enables the incoming call to be taken immediately
if the handset is rem oved from the base station. It is not necessary to press the call
key after rem oving the handset from the base station.
1. Press the
2. Press the
3. Press the
4. Press the
5. Use the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the AUTO ANS subm enu.
key.
or
key to switch autom atic call answering on or off.
key to confirm the input.
6. Press the
28
Activating/ Deactivating Call Tim er
It is possible to display the duration of a call on the handset. The tim er starts when
the conversation begins.
1. Press the
2. Press the
3. Press the
4. Press the
5. Use the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the CALL TIMER subm enu.
key.
or
key to switch the call tim er on or off.
key to confirm the setting.
6. Press the
Default Settings
The handsets can be reset to the default settings. In doing so, all the settings which
you have changed are returned to their default values. The phone book entries are
retained.
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the DEFAULT.
key.
key to confirm input.
Note: The handset is reset to its default settings.
29
Registering Additional Handsets
Further handsets can be registered on the base station. They m ust support the GAP
standard, however, it is possible that some of the handset functions will not be available.
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the HANDSET m enu appears.
key.
or
key to select the REGISTER subm enu.
key.
5. Press and hold the
key on the base station until the acknowledgem ent signal
is heard, then enter the PIN when requested. (Default setting = 0000)
6. Press the
key.
Note: After the connection has been established, the nam e and num ber of the handset
.
(the next available num ber if less than 4 are already registered) appear in the display
30
Barring Calls
The following options are available for selection for barring calls:
Option
Description
DISABLE
All telephone calls are possible.
EXTERNAL All external calls are barred.
NUMBER
Define a num ber which should be barred, e.g. 0190.
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the BASE m enu appears.
key.
or
as often as necessary to select the BARRING subm enu.
key.
5. Enter 0000. Note: (Factory setting is 0000).
6. Press the
7. Use the
8. Press the
9. Use the
Or
key.
or
or
or
key to select the handset which should be barred.
key.
key to select DISABLE or EXTERNAL.
Use the
key to select NUMBER and press the
, then input
10.
the num ber(up to 5 digits) which you want to barred.
11. Press the key.
Entering/ Changing Em ergency Num ber
Em ergency num bers are free of any restrictions, i.e. they can still be called even if
barring of any kind is set.
Note: It is im possible to m ake em ergency calls when the keypad lock is enabled.
31
Before emergency numbers can be used, they must be stored. The emergency numbers
can then be dialed m anually or from the phone book if they are stored there.
Two different em ergency num bers (m axim um of five digits) can be program m ed.
Exam ple: Three-digit em ergency num ber = 123. All num bers which begin with 123
are dialed even if the unit is only program m ed for internal calls.
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the BASE m enu appears.
key.
or
as often as necessary to select the EMERGENCY subm enu.
key.
5. Enter the PIN. Note: (Factory setting is 0000).
Note: It is recom m ended to enter em ergency num bers in the phone book and to assign
significant nam es (e.g. "DOC","FIRE").
6. Press the
7. Use the or key to select the em ergency num ber to be changed and change it.
8. Press the key.
key.
Changing the Flash Tim e
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
key as often as necessary until the BASE m enu appears.
key.
as often as necessary to select the FLASH TIME subm enu.
key.
key to select the required flash tim e.
key.
or
or
32
Select Dial Mode
1. Press the
2. Press the
3. Press the
4. Press the
5. Press the
6. Press the
key repeatedly until BASE appears.
key.
key to select DIAL MODE.
key.
key to select TONE or PULSE.
key to confirm the selection.
or
or
Changing the PIN
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the BASE m enu appears.
key.
as often as necessary to select the CHANGE PIN subm enu.
key.
or
5. Enter the old PIN (0000).
6. Press the key.
7. Enter the new PIN (e.g. 1111).
8. Press the key.
9. Enter the new PIN again (e.g. 1111).
10. Press the
key.
33
Default Settings
1. Press the
2. Press the
3. Press the
key as often as necessary until the BASE m enu appears.
key.
or as often as necessary to select the required DEFAULT subm enu.
4. Enter the PIN.
5. Press the
key.
6. Press the
key to confirm .
Delete HS
If several handsets are registered on one base station, they can deregister each other
m utually. The last handset cannot be deregistered.
1. Press the
2. Press the
3. Press the
4. Press the
key as often as necessary until the BASE m enu appears.
key.
or
as often as necessary to select the DEREGISTER subm enu.
key.
5. Enter the PIN. Note: (Factory setting is 0000).
6. Press the key.
7. If necessary, use the
or
key to select the handset.
8. Press the
9. Press the
key.
key to confirm the selection.
34
Operation
Selecting the language
Making internal calls
Making external calls
Taking calls
/ 5-LANGUAGE /
/ 1 ... 4
/
or
/ ENGLISH /
/ 030123... or 030123... /
End call
Redialing
/
press for 2 seconds
Prefix dialing
/
or
/
Dialing from the phone book
View call log entries
Call call log entries
Delete call log entries
/ 1-CALL LOG /
/ 1-CALL LOG /
/ 1-CALL LOG /
/
/
/
or
/
/
/
or
or
press
/ 1-CALL LOG /
or / ERASE ALL? /
for 2 seconds / ERASE? /
Delete all call log entries
/
or
/ press
/ CONFIRM? /
for 2 seconds /
35
Access Call Waiting Line
Hold,Transfer call (PABX)
EXT Call /
/
again to get to first line
/ Extension Num ber /
36
Phone Book
Store entries
/ 2-PHONE BOOK /
NO / 030123... /
RING /
/ 2-PHONE BOOK /
NO / 030123... /
RING / or
/ 2-PHONE BOOK /
or
/ 1-NEW ENTRY /
/ ENTER NAME / ABC... /
/ ENTER
/ NORMAL
Store VIP entries
/ 1-NEW ENTRY /
/ ENTER NAME / ABC... /
/ VIP RING 1 - 10 /
/ ENTER
/ NORMAL
List entries
/
or
/ 2-LIST ENTRY /
/
Edit call num bers
/ 2-PHONE BOOK /
or
/
/
or
/ 3-EDIT ENTRY /
/ ABC... /
/
/ 030123... /
/ NORMAL RING /
Edit call num bers, VIP entries
/ 2-PHONE BOOK /
or
/ 3-EDIT ENTRY /
/ ABC... /
/
or
/ NORMAL RING /
/ 2-PHONE BOOK /
or
/
/ 030123... /
/ VIP RING 1 - 10 /
Delete call num bers
/
or
/ 4-DELETE /
/
/
Delete all call num bers
/ 2-PHONE BOOK /
/ CONFIRM? /
/
or
/ 5-DELETE ALL /
37
Handset Settings
Ringer volum e
/ 3-HANDSET /
/ 1-RINGER /
/ 1-RINGER /
/ 1-VOLUME /
/
or
/
/ 3-HANDSET /
2-EXT RINGER /
/
/
or
or
/
/
Ringer m elody, external
/
or
/
/
/ 3-HANDSET /
3-INT RINGER /
/ 1-RINGER /
or
Ringer m elody, internal
Change handset nam e
Save prefix num ber
Key tone on/off
/
/ 3-HANDSET /
/ DECT... /
/
/
/
or
or
or
/ 2-HS NAME /
/ 3-HANDSET /
/ 030... /
/ 3-PREFIX MEM /
/ 4-KEY TONE /
/ 3-HANDSET /
/
or
/ 3-HANDSET /
or
/ 3-HANDSET /
or
/ 3-HANDSET /
/ CONFIRM? /
/ 3-HANDSET /
press and hold
/
Autom atic call answering
Call tim er on/off
/
/
or
or
/ 5-AUTO ANS /
/ 6-CALL TIMER /
/
/
/
/
Default settings
Register handset
/
/
or
or
/ 7-DEFAULT /
/ 8-REGISTER /
/
38
on base 2-3 second / enter PIN (default 0000)
Base Settings
Barring, off and external
/ 4-BASE /
/
/ 1-BARRING /
/
/ ENTER PIN / 0000 /
/
or
or
/
/
or
or
/ 4-BASE /
/
/ 1-BARRING /
/
/ ENTER PIN / 0000 /
/ NUMBER /
Barring, num ber
/ ENTER NO / 321... /
Entering em ergency
num bers
/ 4-BASE /
/
or
/
/ 2-EMERGENCY /
or / 321... /
/
ENTER PIN / 0000 /
/ 4-BASE /
Ringer volum e and
m elody
/
or
/ 3-RINGER /
or
/
or
/ 4-BASE /
or
/
/ MELODY /
/
Set flash tim e
/
/
or
or
/ 4-FLASH TIME /
/
/
/
Changing the dialing
m ode
/ 4-BASE /
or
/ 5-DIAL MODE /
/
Changing the PIN
Default settings
Delete HS
/ 4-BASE /
PIN / 0000 /
/
or
/ NEW PIN / 1111 /
or
/ CONFORM? /
/ 8-DEREGISTER /
/ CONFIRM? /
/ 6-CHANGE PIN /
/ REPEAT /1111 /
/ 7-DEFAULT / /
/ ENTER
/ 4-BASE /
ENTER PIN / 0000 /
/
/ 4-BASE /
PIN / 0000 /
/
or
/ ENTER
39
/
or
/
WARRANTY INFORMATION
MOTOROLA DOES NOT WARRANT ITS CORDLESS TELEPHONE PRODUCTS
("PRODUCT(S)") TO YOU, THE END-USER. A LIMITED WARRANTY FOR THIS PRODUCT
IS PROVIDED TO YOU BY MOTOROLA'S DISTRIBUTOR ("DISTRIBUTOR") PURSUANT
TO DOCUMENTATION INCLUDED WITH THIS PRODUCT. PLEASE CONTACT THE
DISTRIBUTOR IF YOU EXPERIENCE PROBLEMS WITH THIS PRODUCT.
TO THE FULLEST EXTENT PERMITTED UNDER APPLICABLE LAW (A) MOTOROLA
HEREBY DISCLAIMS ALL WARRANTIES OF ANY KIND RELATING TO THE PRODUCT
THAT BIND THE MANUFACTURER, WHETHER EXPRESS, IMPLIED OR STATUTORY,
INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR ANY WARRANTY AGAINST
INFRINGEMENT PROVIDED UNDER ANY LAW, AND (B) IN NO EVENT SHALL
MOTOROLA BE LIABLE TO YOU OR ANY OTHER PARTY FOR ANY DIRECT, INDIRECT,
GENERAL, SPECIAL, INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER
DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF INFORMATION OR ANY OTHER PECUNIARY
LOSS), OR FROM ANY BREACH OF WARRANTY, EVEN IF MOTOROLA HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. MOTOROLA SHALL NOT BE
BOUND BY PRODUCT RELATED STATEMENTS NOT DIRECTLY MADE BY MOTOROLA
NOR ANY WARRANTY OBLIBATIONS APPLICABLE TO THE DISTRIBUTOR.
40
WARRANTY INFORMATION
Alcom Electronics Pte Ltd. (Distributor) guarantees to you, the original purchaser, the digital
cordless telephone and accessories which you have purchased from an authorised
reseller (the "Products"), to be in conform ance with the applicable specifications current
at the tim e of m anufacture for a term of 12 m onths from date of purchase of the
Product(s) (Warranty Term ). You m ust inform Distributor of the lack of conform ity to
the applicable specifications of any of the Products within a period of two (2) m onths
from the date on which you detect a defect in m aterial, workm anship or lack of
conform ity and in any event within a term not to exceed the Warranty Term , and m ust
im m ediately subm it the Product for service to Distributor's Repair or Service Centre.
During the Warranty term , Distributor will, at its discretion and without extra charge,
as your exclusive rem edy, repair or replace your Product which does not com ply with
this warranty; or failing this, to reim burse the price of the Product but reduced to take
into account the use you have had of the Product since it was delivered. This warranty
will expire at the end of the Warranty Term .
For details, please contact :
HOW TO GET WARRANTY SERVICE?
In order to be eligible to receive warranty service, you m ust present your receipt of
purchase or a com parable substitute proof of purchase bearing the date of purchase.
The digital cordless telephone should also clearly display the original com patible
electronic serial num ber. Such inform ation is contained with the Product.
41
You m ust ensure that all and any repairs or servicing is handled at all tim es by a
Distributor's Service Centre in accordance with the Distributor's Service requirem ents.
In som e cases, you m ay be requested to provide additional inform ation concerning
the m aintenance of the Products by Distributor's Service Centres only, therefore it is
important to keep a record of any previous repairs, and make them available if questions
arise concerning m aintenance.
CONDITIONS
This warranty will not apply if the type or serial num bers on the Product has been
altered, deleted, duplicated, rem oved, or m ade illegible. Distributor reserves the right
to refuse free-of-charge warranty service if the requested docum entation can not be
presented or if the inform ation is incom plete, illegible or incom patible with the factory
records. Repair, at Distributor's option, m ay include reflashing of software, the
replacem ent of parts or boards with functionally equivalent, reconditioned or new
parts or boards. Replaced parts, accessories, batteries, or boards are warranted for
the balance of the original warranty tim e period. The Warranty Term will not be
extended. All original accessories, batteries, parts, and digital cordless telephone that
have been replaced shall becom e the property of Distributor.
Distributor does not warrant the installation, m aintenance or service of the products,
accessories, batteries or parts.
Distributor will not be responsible in any way for problem s or dam age caused by any
ancillary equipm ent not furnished by Distributor which is attached to or used in
connection with the Products.
42
When the Product is used in conjunction with ancillary or peripheral equipm ent not
supplied for this digital cordless telephone by Distributor, Distributor does not warrant
the operation of the Product/peripheral com bination and Distributor will not honour
any warranty claim where the Product is used in such a combination and it is determined
by Distributor that there is no fault with the Product.
WHAT IS NOT COVERED BY THE WARRANTY
This warranty is not valid if the defects are due to dam age, m isuse, tam pering, neglect
or lack of care and in case of alterations or repair carried out by unauthorised persons.
The following are exam ples of defects or dam age not covered by this product warranty
Defects or dam age resulting from use of the Product in other than its norm al and
custom ary m anner.
Defects or dam age from m isuse, access to incom patible sources, accident or neglect.
Defects or dam age from im proper testing, operation, m aintenance, installation,
adjustm ent, unauthorised software applications or any alteration or m odification
of any kind.
Breakage or dam age to antennas unless caused directly by defects in m aterial or
workm anship.
Products disassem bled or repaired other than by Distributor in such a m anner as
to adversely affect perform ance or prevent adequate inspection and testing to verify
any warranty claim .
Defects or dam age due to range, coverage, availability, grade of service, or operation
of the cellular system by the cellular operator.
Defects or dam age due to m oist, liquid or spills of food.
43
All plastic surfaces and all other externally exposed parts that are scratched or
dam aged due to custom er norm al use.
Products rented on a tem porary basis.
Periodic m aintenance and repair or replacem ent of parts due to norm al wear and tear.
Note: The talk-tim e, stand-by tim e and total life cycle of the rechargeable batteries
for your digital cordless telephone will depend on usage conditions and network
configurations. As a consum able product, the specifications indicate that you should
be able to obtain optim um perform ance for your digital cordless telephone within
the first two m onths from date of purchase.
The warranty for the rechargeable batteries becomes void if (i) the batteries are charged
other than by original battery chargers specified for the charging of the battery, (ii)
any of the seals on the battery are broken or show evidence of tam pering, (iii) the
battery is used in equipm ent or service other than the digital cordless telephone for
which it is specified.
Depending on operating conditions and your usage habits, wear and tear m ight take
place of com ponents including m echanical problem s related to Product housing, paint,
assem bly, sub-assem blies, displays and keyboards and any accessories which are
not part of the Product's in-box configuration. The rectification of faults generated
through wear and tear and the use of consum able item s like batteries is considered
to be your responsibility and therefore Distributor will not provide the free Warranty
repair service for these item s.
44
Please m ake and retain a note of all data you have inserted into your Product for
exam ple nam es and phone num bers, before subm itting your Product for a Warranty
service as such data m ay be deleted or erased as part of the repair or service process.
OUT OF WARRANTY REPAIRS
If you request Distributor to repair your Product any tim e after the Warranty term or
where this warranty does not apply due to the nature of the defect or fault, then
Distributor m ay in its discretion carry out such repairs subject to you paying Distributor
its fees for such a repair or it m ay refer you to an authorised third party to carry out
such repairs.
45
|