Miele KM84 2 User Manual

Operating instructions  
Ceramic cooktop  
KM 84-2, KM 87-2  
In order to protect yourself and  
avoid damage to your machine,  
it is absolutely necessary to read  
the operating instructions prior  
to installation and operation.  
]ö  
M.-Nr. 03 999 410  
Help protect our environment  
Help protect our environment  
Disposal of packaging  
The transport and protective packing is  
mostly manufactured from the following  
re-usable materials:  
. . . Corrugated paper / cardboard -  
mostly from recycled materials.  
. . . Polyethylene foil (PE) -  
partly from secondary raw materials.  
Rather than throwing these materials  
away, please take them to your nearest  
recycling center.  
Disposal of your old machine  
Old machines contain materials which  
can be recycled. Please contact your  
recycling center or scrap merchant, be-  
fore disposing of the appliance.  
Read the notes on page 7 before  
disposing of the appliance.  
3
Description of the appliance  
Description of the appliance  
KM 84-2 / KM 87-2  
3
4
2
1
5
7
8
7
6
bControl panel  
Data plate  
cCooking area -  
diameter 5-3/4" (14.5 cm)  
KM 84-2: 1200 W  
Because the data plate is no longer  
visible once the appliance has been  
installed, a 2nd data plate is supplied  
which should be placed in the space  
provided on page 17 of these instruc-  
tions.  
KM 87-2: 1200 W  
dCooking area -  
diameter 7-1/8" (18 cm)  
KM 84-2: 1700 W  
Special accessories  
KM 87-2: 1900 W Halogen  
eResidual heat indicator  
fConnection cable  
Special accessories are available from  
your Miele Dealer or from the Spare  
Parts Department.  
gControl for the front cooking area  
hCooking area indicator lamp  
iControl for the rear cooking area  
Stainless steel cover EA 80 (optional)  
For installation of this cover, a minimum  
distance of 20" (510 mm) is required be-  
tween the countertop and overhanging  
cabinets.  
4
Warning and Safety Instructions  
Warning and Safety Instructions  
"CAUTION": Do not store items of  
interest to children behind or in  
cabinets above the cooktop.– Children  
climbing on the cooktop to reach items  
could be seriously injured.  
Warning:  
When using your cooktop, follow  
basic safety precautions including  
the following:  
Do not allow children to operate or  
play with or near the cooktop.  
Read all instructions before using  
the cooktop.  
Store all play items away from the  
cooktop to prevent injury to  
Use the cooktop only for its in-  
tended use.  
curious or playful children.  
Be sure your appliance is properly  
installed and grounded by a quali-  
fied technician.  
Please remember that burners  
become hot; therefore, ensure that  
children do not touch them.  
Before servicing, disconnect the  
power supply by removing the fuse  
or turning off the circuit breaker.  
Do not store items on the cooktop  
when not in use.  
Do not let cooking grease or other  
flammable materials accumulate  
on the cooktop.  
The electrical safety of this  
appliance can only be guaranteed  
when continuity is complete between  
the appliance and an effective  
Never leave the cooktop unat-  
tended when cooking with oil or  
fat. Very hot oil can cause a fire.  
grounding system.  
It is imperative that this basic safety re-  
quirement be met. If there is any doubt,  
the electrical system of the house  
should be checked by a qualified elec-  
trician. The manufacturer cannot be  
held responsible for damage caused  
by the lack or inadequacy of an effec-  
tive grounding system.  
Allow sufficient time for the cook-  
top to cool before touching or ex-  
posing surface areas to flammable ma-  
terials.  
If cracks or crevices appear in the  
cooktop, immediately turn off the  
cooktop and contact the Miele Service  
Department or your local service dealer.  
Never use the cooktop to warm or  
heat the room.  
If sugar (either solid or liquid) or  
plastic melt onto the ceramic  
surface, it is essential to follow the  
When using an electrical outlet  
near the cooktop, make sure that  
the cable of the appliance does not  
come into contact with the burners.  
cleaning instructions on Page 14.  
5
Warning and Safety Instructions  
Warning and Safety Instructions  
Always cook pork thoroughly to en-  
Wear proper apparel – Loose-fit-  
ting or hanging garments should  
sure that, in the event of trichina,  
all bacteria will be killed and the meat  
never be worn while using the ap-  
is safe to eat.  
pliance.  
For best results, utilize pots and  
pans that are the same size as the  
cooktop heating elements.  
Do not repair or replace any part of  
the appliance unless specifically  
recommended in the manual. All other  
servicing should be refered to a quali-  
fied technician.  
If high settings are used, be cau-  
tious of splattering grease or  
liquids boiling over which may produce  
smoke.  
Do not use water on grease fires.  
Smother the fire or use a dry  
chemical or foam-type extinguisher.  
Use only dry potholders.  
Do not cook on a broken cooktop –  
If the cooktop should break,  
Use only cookware suitable for  
range-top service. Unsuitable  
cookware may break due to sudden  
temperature changes.  
cleaning solutions and spillovers may  
penetrate the broken cooktop and  
create a risk of electrical shock.  
Contact the Miele Service Department  
or your local Service dealer.  
Always position the handle of the  
cookware toward the center of the  
cooktop to minimize burns, spillage  
and ignition of flammable materials.  
Clean the cooktop using caution –  
If a wet sponge or cloth is used to  
wipe spills on a hot cooking area, be  
careful to avoid steam burns. Some  
cleaners can produce toxic fumes if ap-  
plied to a hot surface.  
Before removing pots and pans,  
be sure to turn surface units to OFF.  
Always heat fat slowly, monitoring  
it as it heats.  
Under no circumstance use a  
steam-cleaning appliance to clean  
the cooktop.  
The steam could penetrate to live com-  
ponents and cause a short circuit.  
When frying foods, make sure that  
the food is as dry as possible to  
prevent moisture from causing hot fat  
to bubble over.  
When shallow or deep-frying, do  
not overfill the pan with oil.  
SAVE THESE INSTRUCTIONS AND  
REVIEW THEM PERIODICALLY.  
6
Warning and Safety Instructions  
Warning and safety instructions  
Keep these instructions in a safe  
place and pass them on to any  
future user.  
Disposal of discarded appliances  
Before disposal of an old ap-  
pliance, disconnect and remove  
the appliance cord to render it useless.  
This is intended to prevent the dis-  
carded appliance from being a hazard.  
Text highlighted in boxes is of par-  
ticular importance and should be  
read in conjunction with the Warn-  
ing and Safety instructions.  
7
Before using for the first time  
Before using for the first time  
Read the “Warning and Safety in-  
structions” before using for the first  
time.  
Thoroughly clean the ceramic cooktop  
before using for the first time, and then  
regularly after each use (see “Cleaning  
and care”).  
There may be a slight smell during the  
initial use due to the drying effect of the  
insulation material.  
8
Cooktop controls  
Cooktop controls  
All cooking areas are controlled by vari-  
Correct procedure:  
able control knobs. By using these con-  
trol knobs, temperatures can be freely  
selected.  
Place saucepan of food on cooking  
area.  
Select a high number for boiling or  
sealing in juices.  
The controls can be turned either clock-  
wise or counterclockwise.  
Should a trace of steam become  
visible on the edge of the lid, switch  
to a lower number for continued  
cooking.  
The indicator lamp for each cooking  
area lights as soon as the respective  
control knob is turned to a setting.  
It goes out when the control knob is  
turned to the “0” position.  
Turning the temperature down at the  
right time . . .  
. . . prevents food from overcooking.  
. . . prevents food from burning.  
. . . saves energy.  
A resistance is felt between settings 7  
and 8 to indicate that a higher tempera-  
ture range is being reached.  
9
Control settings  
Control settings  
Table of settings for control knobs  
Setting  
Melting butter, chocolate etc.  
Dissolving gelatin  
Preparing yogurt  
1 - 2  
Keeping food warm  
Warming small quantities of food / liquid  
Thickening sauces containing egg yolk or  
butter  
Cooking milk pudding  
Omelettes  
1 - 3  
3 - 5  
Defrosting deep frozen food  
Cooking rice, pasta  
Steaming fruit, vegetables, fish  
Cooking broths, soups  
Braising meat, fish, vegetables  
Cooking dumplings, potatoes, soups  
Preparing jams, jellies, stewed fruit  
4 - 6  
Frying chops, liver, sausage, fish, eggs  
7 - 10  
Frying pancakes, dropped biscuits and other liquid batters  
Frying steaks  
Deep frying (chips, fritters)  
Boiling water  
9 - 12  
These figures are intended as a guide. With deep pans, large quantities, or without the lid, a higher  
setting is needed. With smaller quantities select a lower setting.  
10  
Description of cooking areas  
Description of cooking areas  
The temperature limiter may also be ac-  
tivated when the utensils are suitable.  
The reason for this could be light co-  
lored saucepan bases (heat reflection)  
or poor transfer of heat from the sauce-  
pan base to the food.  
Cooking areas - diameter  
The cooking areas are clearly marked  
on the cooktop unit. Only the area  
which has been turned on will be  
heated. The rest of the cooktop surface  
will remain relatively cool.  
Important note  
Residual heat indicator  
While the cooking areas are heating  
up, a “hummingnoise may be no-  
ticed. This is caused by magnetization  
of the heating filaments. As the cooking  
areas heat up, the humming noise will  
diminish and finally will cease al-  
together.  
Each cooking area has a residual heat  
indicator. When a cooking area is  
turned on, its residual heat indicator  
lights up. It only goes out after the cook-  
ing area has been turned off and the  
cooking surface has reached a tem-  
perature safe to the touch.  
For halogen cooking areas only:  
Temperature limiter  
The radiant elements work together  
with the halogen lamps. This gives a  
quicker heat transfer to the pan base,  
resulting in a shorter heating-up period.  
All cooking areas are equipped with a  
temperature limiter, which turns the  
heating element off if the temperature  
under the ceramic surface gets too  
high.  
The temperature limiter turns the heat-  
ing element on again after the tempera-  
ture has returned to a safe level.  
The temperature limiter operates  
. . . when unsuitable cooking utensils  
are used (e.g. saucepans with uneven  
bases or which are too small).  
. . . when cooking areas are used with-  
out pots.  
11  
Operation  
Operation  
Saucepans  
Saucepan size  
The following notes are designed to en-  
able you to  
. . . make the best use of energy when  
using your ceramic cooktop.  
. . . prevent food from boiling over and  
burning on to the ceramic cooktop.  
The diameter of the saucepan should  
be a little larger than that of the cooking  
area.  
Pots and pans are available which  
have been specially tested for use on  
glass ceramic cooktops.  
Saucepan lids  
Saucepan bases  
A lid on the saucepan will prevent heat  
from being lost, and decrease the cook-  
ing time.  
So that optimum energy consumption  
is achieved during cooking, only sauce-  
pans with bases as flat as possible, or  
very slightly concave, should be used.  
When the saucepan is hot, the base  
should rest evenly on the ceramic sur-  
face.  
Only use saucepans approved for  
use on ceramic cooktops. Do not  
use pots or pans having bases with  
pronounced edges or ridges as  
these could permanently scratch  
the cooktop surface.  
12  
Operation  
Operation  
When using aluminum or stainless  
Note:  
steel utensils, the metal can affect  
the ceramic surface by leaving white  
colored spots behind.  
Do not use any pots or pans on the  
ceramic cooktops having bases  
with pronounced edges or ridges.  
These could permanently scratch  
the cooktop surface.  
These spots can be removed most  
easily if they are treated immediately  
with a ceramic cooktop cleaner (see  
chapter on “Cleaning and Care”).  
Place a saucepan on the cooking  
area before turning on the appliance  
to save energy.  
Do not allow solid or liquid sugar, or  
pieces of plastic or aluminum foil  
onto the ceramic cooktop unit when  
it is hot.  
The ceramic surface and the base of  
the saucepan should be clean and  
dry.  
If this should occur do not turn the  
appliance off. Scrape the remains  
from the cooktop with a razor blade,  
taking care not to burn yourself.  
This saves unnecessary cleaning  
after cooking and protects the cook-  
ing area.  
Care should be taken that no gra-  
nules (e. g. salt, sugar, etc.) are on  
the cooktop when cooking.  
If it is allowed to cool before the  
cooktop has been cleaned, the ce-  
ramic surface will be susceptible to  
pitting or cracking.  
If such granules should find their  
way under a saucepan when it is  
pushed across the cooktop, the  
granules could scratch the surface.  
Do not push enamelled baking  
sheets, frying pans or saucepans  
across the ceramic surface.  
Scratches may occur.  
13  
Cleaning and care  
Cleaning and care  
Removal of sugar, syrups, plastic or  
aluminum foil  
Ceramic cooktop  
Generally you can use the same clean-  
ing agents for the ceramic cooktop as  
you would for ordinary glass surfaces.  
Do not turn off the cooking area!  
Scrape off the residue thoroughly  
from the hot cooktop with a razor  
blade, taking care not to burn your-  
self. Then turn off the cooktop, and  
when it is cool, clean with a ceramic  
cooktop cleaner.  
Never use scouring agents or pads,  
or strong cleaners such as oven  
sprays or stain removers, as these  
could harm the surface.  
Clean after each use  
Suitable ceramic cooktop cleaners  
Wipe off any minor spills with a damp  
cloth.  
There are special cleaners on the mar-  
ket for ceramic cooktops. Follow the  
manufacturer’s instructions.  
If the cooktop is cleaned with a soap,  
for example dishwashing liquid, light  
blue staining may occur. These stains  
can be removed with a ceramic cook-  
top cleaner, although they can be  
stubborn and may take several applica-  
tions.  
If you have difficulty finding a suitable  
ceramic cooktop cleaner, contact the  
Miele Service Department for advice.  
Do not apply to the cooktop when  
still hot.  
Hardened spills should be carefully  
scraped off with a razor blade. The  
cooktop surface should then be  
rubbed clean with a damp cloth.  
After applying the ceramic cooktop  
cleaner let it dry and then rub it off  
using a soft towel.  
Light marks with a metallic sheen  
Always make sure that every trace of  
cleaning agent has been removed, as it  
could have an adverse effect on the  
cooktop when turned on.  
Aluminum deposits on the cooktop sur-  
face can be removed once the cooktop  
has cooled down by using a ceramic  
cooktop cleaner.  
Lime deposits caused by water boiling  
over, can be removed with vinegar or a  
ceramic cooktop cleaner.  
14  
Cleaning and care  
Cleaning and care  
Some cleaners incorporate a silicone  
Control panel / Control knobs  
agent which acts as a protective film  
for the ceramic cooktop.  
Do not use any scouring agents or  
pads on the knobs or control panel,  
as these could cause damage.  
It makes the cooktop surface smoother  
and prevents water and food from ad-  
hering to the surface.  
Clean the cooktop controls and the con-  
trol panel with hot water and a little dish-  
washing liquid.  
After application, rub dry with a clean  
cloth.  
Cooking at high temperatures reduces  
this effect and the cleaner may need to  
be reapplied.  
By cleaning your ceramic surface with  
one of these agents, you will help avoid  
damage caused by sugar, syrups and  
aluminum foil deposits.  
15  
Correcting minor faults  
Correcting minor faults  
Repairs to electrical appliances  
should only be carried out by a  
trained person. Unauthorized re-  
pairs can be dangerous.  
Some minor problems, however, can  
be remedied as follows:  
What to do if . . .  
. . . a humming sound is heard while  
the ceramic cooktop is heating up?  
This is not a fault. As the cooking area  
heats up, the humming disappears  
completely.  
. . . a resistance is felt between set-  
tings 7 and 8?  
This is not a fault. The resistance is  
there to indicate that a higher tempera-  
ture range is being reached.  
. . . the cooking area does not get hot  
when turned on and the indicator  
lamp does not light?  
Check that the circuit breaker hasn’t  
tripped.  
If it has, call the Miele Service De-  
partment for assistance.  
16  
After Sales Service  
After Sales Service  
In the event of any fault which you can-  
not correct yourself, please contact  
Your Miele Dealer  
or  
The Miele Service Department  
The address of the nearest Miele  
Service Department is given on the  
back cover.  
When contacting the Service Depart-  
ment, please give the Model and Serial  
No. of the appliance, both of which can  
be found on the data plate.  
Space for supplied data plate  
17  
Electrical connection  
Electrical connection  
Electrical connection of the appliance  
For CDN only  
should be made by a qualified electri-  
cian and in accordance with local and  
national standards.  
The appliances are provided with 3 ter-  
minal leads: 1 black wire, 1 red wire  
and 1 green wire which have to be con-  
nected to a separate overcurrent pro-  
tection device (Miele fuse box).  
Note to installer:  
Please leave these instructions with  
the consumer.  
All hot wires (black and red) have to be  
fused individually before connecting  
them to the main power supply leads.  
Power supply:  
Please check dataplate for  
240 VAC; 60 Hz or  
208 VAC; 60 Hz  
Use 15 A / 250 V fuses for ap-  
pliances rated 240 VAC.  
Caution:  
Disconnect the power supply be-  
fore servicing. To reduce the risk of  
electric shock, make sure that the  
appliance is properly grounded  
after installation.  
Connect black terminal wire to L1  
(black) and red terminal wire to L 2  
(red). The green terminal wire (ground)  
has to be connected directly to the  
equivalent colored power supply leads.  
All connections must be done in a  
proper way.  
WARNING:  
THIS APPLIANCE MUST BE  
GROUNDED  
SEE ALSO WIRING DIAGRAM PRO-  
VIDED WITH THE APPLIANCE.  
For USA only  
The appliance is provided with 3 termi-  
nal leads, 1 black wire (L 1), 1 red wire  
(L 2) and 1 green wire (GND) which  
have to be connected to a dedicated  
junction box. Connect black wire to L1,  
red wire to L2 and green wire to GND.  
All connections must be done  
according to code.  
SEE THE CIRCUIT DIAGRAM PRO-  
VIDED WITH THE APPLIANCE.  
18  
Electrical connection  
Electrical connections  
FOR CANADA ONLY  
WARNING: THE APPLIANCE MUST  
BE GROUNDED  
Miele Fuse Box  
Cap  
Fuse Holder  
19  
Appliance dimensions  
Appliance dimensions  
KM 84-2, KM 87-2  
11-5/16’’  
20 1/16’’  
2 3/16’’  
19 5/16’’  
10 7/16’’  
Dimensions are given in inches and  
mm (bold).  
20  
Installation instructions  
Installation instructions  
There may be a wall at the rear and a  
wall or tall cabinet on one side.  
On the other side, however, no cabinet  
or appliance must stand higher than  
the cooktop.  
1-3/16’’  
21  
Installation instructions  
Installation instructions  
There must be a minimum distance of 1-  
3/16" (30 mm) between the cooktop  
and adjacent cabinet or tall appliance.  
Depth Width  
in (Dimen- (Dimensio  
mm * sion B)  
in mm  
Width  
n B) in  
inches  
2 zone Combiset  
1 appliance  
2 appliances  
3 appliances  
4 appliances  
5 appliances  
490  
490  
490  
490  
490  
265  
558  
851  
1144  
1437  
10-7/16"  
22"  
33-1/2"  
45-1/16"  
56-5/8"  
2 3/16’’  
4 zone Combiset  
19 5/16’’  
2 3/16’’  
1 appliance  
2 appliances  
3 appliances  
490  
490  
490  
560  
1143  
1728  
22-1/16"  
45"  
68-1/16"  
Prepare the countertop cut-out as il-  
lustrated.  
Combination  
Dimension ”B“ will change depend-  
ing on how many combisets are  
installed and is given on the chart.  
One 2 zone  
+ one 4 zone  
490  
490  
490  
490  
490  
851  
33-1/2"  
45"  
Two 2 zone  
+ one 4 zone  
1143  
1437  
1436  
1729  
Three 2 zone  
+ one 4 zone  
56-5/8"  
56-9/16"  
68-1/16"  
One 2 zone  
+ two 4 zone  
Two 2 zone  
+ two 4 zone  
Extractor (e.g. DA 8-2)  
For installation between two appliances:  
- Dimension B increases by 90 mm (3 9/16").  
For installation at the end of a combination:  
- Dimension B increases by 98 mm (3 7/8").  
* 490 mm = 19 5/16 "  
22  
Installation instructions  
Installation instructions  
Place the seal provided funder  
the edge of the cooktop.  
tighten  
loosen  
bAppliance  
cTensioning screw  
dClamp  
eCountertop  
fSeal  
Turn the tensioning screws c  
counterclockwise until a resistance is  
felt, then turn the clamps dto the  
left.  
Place the appliance in position, turn  
the clamps and tighten the tension-  
ing screws until the clamps press  
into the countertop e. Do not use ex-  
cessive force.  
Connect the appliance to the electri-  
cal supply.  
When installing several Combiset units,  
a stainless steel spacer bar should be  
installed between the units. It comes  
supplied with its own installation instruc-  
tions.  
23  
Installation instructions  
Installation instructions  
To eliminate the risk of fire or burns  
caused by reaching over heated sur-  
face units, cabinet storage space lo-  
cated above surface units should be  
avoided.  
If cabinet storage or a range hood is  
provided, distance A has to be at least  
30" (75 cm). A range hood has to ex-  
tend at least 5" (12,5 cm) beyond the  
bottom of the cabinets.  
24  
25  
26  
27  
Alteration rights reserved / 22 / 001  
CDN, USA - 4097  
This paper is made from 100% chlorine-free bleached cellulose and therefore protects the environment.  

HP Hewlett Packard W185 User Manual
Jenn Air Cooktop CCG2421 User Manual
KitchenAid KGCT025 User Manual
NEC Electronics America Computer Monitor LCD170V User Manual
Optimus 16 422 User Manual
Philips 21PT350A User Manual
Philips 21PT6146 User Manual
Philips BDS4624R User Manual
Philips DVP3258 User Manual
Philips MCD137 User Manual