Operating Instructions
Gas Cooktop
KM 404
®
UV
M.-Nr. 05 060 871
®
To prevent accidents and
machine damage,
read the operating instructions
before
installation or use.
Contents
Guide to the cooktop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Before using the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the cooktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Suitable pans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Safety feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Ceramic surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Help protect our environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3
IMPORTANT SAFETY INSTRUCTIONS
Installation and connection
Before servicing, turn off the gas
valve and disconnect the power
supply by either removing the fuse,
unplugging the unit or manually
"tripping" the circuit breaker.
When using your gas appliance
follow basic safety precautions
including the following:
This equipment has not been
designed for maritime use or for
use in mobile installations such as
aircraft or recreational vehicles.
However, under certain circumstances
it may be possible for installation in
these applications. Please contact the
nearest Miele Dealer or the Miele
Technical Service Department with
specific requirements.
Read all instructions before using
for the first time.
Be certain your appliance is
properly installed and grounded by
a qualified technician.
To guarantee the electrical safety
of this appliance, continuity must
exist between the appliance and an
effective grounding system. It is
imperative that this basic safety
requirement be met. If there is any
doubt, have the electrical system of the
house checked by a qualified
electrician. The manufacturer cannot be
held responsible for damages caused
by the lack, or inadequacy, of an
effective grounding system.
After connecting the appliance test
for leaks according to the
installation instructions.
If there is any doubt concerning
installation contact Miele’s
Technical Service Department.
U 1-800-999-1360
Install the appliance so that the
power cord or gas piping does not
come in contact with any portion of the
cooktop which may become hot during
use.
V 1-800-565-6435
Do not connect the appliance to
the main electrical supply using an
extension cord. Extension cords do not
meet the safety requirements of this
appliance.
4
IMPORTANT SAFETY INSTRUCTIONS
Correct usage
Do not use pans with too large of a
bottom diameter. Using larger pans
may cause the flames to spread out
and damage the surrounding
countertop or other countertop
appliances.
Do not operate the cooktop until it
is properly installed in the
countertop.
This appliance is intended for
residential cooking only.
For safety and stability, do not use
pans with a bottom diameter
smaller than the pan support.
Use the appliance only for its
intended purpose. The
manufacturer cannot be held
responsible for damages caused by
improper use of the cooktop.
Do not store aerosols,
combustibles and/or any other
easily flammable materials underneath
or adjacent to the cooktop.
Take care that drafts do not blow
flammable material toward the
flames or push the flames so that they
extend beyond the edges of the pan.
Only certain types of glass/ceramic
or other glazed cookware are
suitable for use on a cooktop without
Never use the cooktop to warm the breaking due to a sudden temperature
room.
change.
Install the cooktop in a room that
has sufficient ventilation.
Protection from damage
Do not use a steam cleaner to
clean the appliance. Steam could
penetrate electrical components and
cause a short circuit.
This appliance must not be
operated outdoors.
Do not use aluminum foil to line any
part of the cooktop.
Spills containing salt or sugar
should be removed immediately.
For proper lighting and
performance of the burners, keep
the igniters clean and dry.
Do not drop anything on the
ceramic surface of the appliance.
Although the ceramic glass is shock
and scratch resistant, it is not shock or
scratch proof.
Make sure all components of the
gas burners are assembled
correctly before using the cooktop.
Ensure that any burners in use are
always covered with a pan.
5
IMPORTANT SAFETY INSTRUCTIONS
Personal Safety
Do not let cooking grease or other
flammable materials accumulate
on the appliance.
The burners become very hot
when in use. Make sure that no one
comes in contact with the burners.
Do not leave the cooktop
unattended while in use.
Overheated food can ignite.
Do not leave children unattended
in an area where the appliance is in
use.
Do not use water on grease fires.
Smother any fire or flame, or use a
dry chemical or foam-type extinguisher.
Do not store toys or items of
interest to children in cabinets
above or behind the cooktop. Children
climbing onto the cooktop to reach
these items may become seriously
injured.
Be careful when preparing a
flambé beneath the hood. Flames
could be drawn up into the hood by the
suction and ignite the grease filters.
Do not allow children to operate or
play with the cooktop. Keep all
pans out of the reach of children.
The flame should be the same size
as the bottom of the pan. Do not
use small pans with high flame settings
as the flames can climb the sides of the
pan.
Only use dry, heat resistant
potholders. Moist or damp
potholders used on hot surfaces can
result in steam burns. Do not let the
potholder touch the hot burners. Do not
use towels or other bulky items near the
appliance.
Only use cooking utensils suitable
for cooktop use.
Always position pan handles and
utensils inward so they do not
extend over adjacent work areas,
Be aware of loose fitting or hanging burners or the edge of the cooktop.
garments when operating the
If there is a drawer directly
cooktop, they may present a fire
underneath the appliance without a
hazard.
wooden base in between, ensure that
Do not heat unopened food
containers. Built-up pressure may
cause the container to burst and result
in injury.
no aerosols, combustible liquids or
other easily flammable materials are
kept in it. If cutlery inserts are to be
placed in the drawer they must be
made of heat-resistant material.
Do not store items on the cooktop
when not in use.
6
IMPORTANT SAFETY INSTRUCTIONS
Damage to the appliance
Further safety notes
In the event of damage or a defect,
turn off the appliance immediately.
Turn off the gas shut off valve, and
disconnect completely from the
electrical supply. Contact the Miele
Technical Service Department.
Do not use the appliance until it has
been repaired.
When using a portable appliance
near the cooktop, make sure that
its power cord does not come in
contact with the cooktop.
Do not use containers made of
plastic or aluminum. They melt at
high temperatures.
Ensure power is not supplied to the
appliance while repair work is carried
out.
Do not heat empty pots or pans,
they may be damaged.
Before discarding an old
appliance, disconnect it from the
gas and electrical supply, cut off the
power cord and remove any doors to
prevent hazards.
Any breakages or cracks in the
ceramic surface of the appliance
are defects and must be treated as
such. Do not use the appliance until it
has been repaired.
SAVE THESE INSTRUCTIONS
Repairs should only be performed
by qualified technicians to ensure
safety. Repairs and other work by
unqualified persons could be
dangerous. Under no circumstance
should the outer casing of the
appliance be opened.
While the appliance is under
warranty repairs should only be
performed by a Miele authorized
service technician. Otherwise the
warranty is void.
7
Before using the cooktop
Cleaning the cooktop
Metal components have a protective
coating which may give off a slight odor
the first time your new appliance is
heated.
Before using for the first time clean the
appliance as follows:
^ Wash the removable parts of the gas
burner in a mild solution of warm
water and liquid dish soap.
The harmless odor will dissipate after a
short time and does not indicate a
faulty connection or appliance defect.
^ Dry and reassemble them in the
proper order (see the "Cleaning and
care" section).
^ The ceramic surface can be cleaned
using water or a ceramic cooktop
cleaner and then wiped dry with a
soft cloth.
9
Using the cooktop
Turning on and off
The control knobs are used to turn the
burners on and to regulate the strength
of the flames.
Since the outer portion of the flame is
much hotter than the center, the flame
should be set so that its tips do not
extend beyond the sides of the pan.
Flame tips which extend beyond the
sides of the pan are hazardous.
Turning off
^ Turn the knob clockwise to "ß".
This stops the flow of gas and turns off
the burner.
ß Cooktop is turned off
& Highest flame
/ Lowest flame
The knob must only be turned left to
turn the appliance on and right to
turn it off.
Turning on
^ To turn on the burner, press the
control knob down and turn it
counterclockwise to the large flame
symbol. The ignitor will click and
ignite the gas.
If the knob is turned:
- on without pressing it down first,
- clockwise past the 12 o’clock
position, or
- counterclockwise past the smallest
flame symbol,
parts of the cooktop may be
damaged. The manufacturer cannot
be held responsible these damages.
^ When the flame appears, keep the
control knob pressed in for
8-10 seconds to allow the Ignition
Safety Control to reach operating
temperature and release it.
If the flame goes out, repeat the above
procedure, keeping the control knob
pressed in for a few extra seconds.
^ Adjust the knob to the desired
setting.
10
Using the cooktop
Pan size
Suitable pans
– Set the cooktop to a high flame when Any heat resistant pan can be used on
using a large diameter pan and low
flame when using a small diameter
pan.
a gas burner.
Unlike pans used on an electric
cooktop, the bases do not need to be
even for good results.
Thick pan bases will give more even
results, hot spots are reduced due to
better heat distribution.
Thin pan bases will conduct the heat
faster but not as evenly as thick pan
bases. Stir the food frequently to
prevent burning.
– Generally, wide / shallow pans will
heat up quicker and cook more
evenly than narrow / tall ones.
– Using oversized pans may cause the
flames to spread out and damage
the surrounding countertop or other
countertop appliances.
– Do not use small pans with high
flame settings, the flame may climb
the sides of the pan.
– Pots with a smaller diameter than the
grate and pots that do not sit
securely (without wobbling) are
hazardous and should not be used.
11
Using the cooktop
Safety feature
Using the cooktop during a
power failure
This gas cooktop incorporates an
Ignition Safety Control which stops the
supply of gas if the flame goes out.
If there is an interruption to the
electrical supply, the gas can be
ignited using a match.
^ To reignite the burners, turn the
control knob clockwise to "ß", then
follow the procedures outlined in
"Turning on and off".
^ Press down on the desired control
knob and turn it counterclockwise to
the large flame symbol.
This safety feature is not operated by
electricity, it will be active even if the
appliance is in use during a power
failure.
^ While holding down the knob, light
the gas at the burner with a match.
^ When the flame appears, keep the
control knob pressed in for
8 - 10 seconds to allow the Ignition
Safety Control to reach operating
temperature.
12
Cleaning and care
Ceramic surface
Do not use a steam cleaner to clean
this cooktop. Pressurized steam
could cause permanent damage to
the surface and to components for
which the manufacturer cannot
accept responsibility.
The ceramic surface should be cleaned
regularly, preferably after each use.
^ Let your appliance cool to a safe
temperature and remove the grate.
^ Wipe off spills using a damp cloth.
Stubborn spills are best removed
with a shielded scraper blade.
The ceramic surface can be cleaned
using a cleaner for ceramic
^ Sugar or syrup spills must be
cleaned before the cooktop cools
completely or the glass will dimple.
surfaces. Follow the manufacturer’s
instructions on the packaging.
Keep the ignitor in the burner dry. If
it gets wet it will not spark.
^ Apply a cleaner for ceramic surfaces
using a soft cloth or paper towel. This
will prevent any water marks caused
by water boiling over.
After cleaning, the ceramic surface
must be thoroughly dried with a soft
cloth to prevent a build up of
limescale deposits.
^ Clean the ceramic surface with a
damp cloth and dry with a soft cloth.
Do not use any sharp pointed
objects which could damage the
seal between the ceramic surface
and the surrounding frame or
between the frame and the
countertop.
Under no circumstances use a
steam cleaner to clean this cooktop.
Pressurized steam could cause
permanent damage to the surface
and to components, for which the
manufacturer cannot accept
responsibility.
13
Cleaning and care
Burners
Reassembling the burner
The burners can be dismantled and
cleaned when completely cool.
Dismantling and cleaning
^ Remove the burner parts and wash
them in a solution of hot water and
liquid dish soap.
^ Dry them thoroughly. Make sure that
the flame holes are clean and
completely dry.
The shiny surfaces of the burner caps
will dull with time and usage. This is
normal and will not affect the operation
of the cooktop.
^ Clean the burner base, the ignitor
and Ignition Safety Control with a
damp cloth and then dry with a soft
cloth.
Be careful not to mix up the parts. Make
sure that all the locating tabs and
notches align exactly.
The ignitor must be thoroughly dry, or it
will not spark.
^ Place the burner head, b, onto the
burner base, a, so that the Ignition
Safety Control and ignitor extend
through their respective holes.
^ Return the burner cap, c.
^ Return the grate.
14
Frequently asked questions
... the flame goes out after being lit?
All repairs should be performed by a
trained technician in strict
accordance with national and local
codes. Any repairs or maintenance
performed by unqualified personnel
could be dangerous.
^ Check whether the burners are
assembled correctly.
^ Make sure the gas holes in the
burner ring are clean and open.
... the igniter no longer work?
^ Check if there is food residue
between the ignitor and the burner.
Some minor problems can be resolved
as follows:
^ Make sure the ignitor is dry.
What to do if ...
... the flame appears different than
usual?
... the burners do not ignite after
several attempts?
^ Check whether the burners are
assembled correctly.
Check if:
^ the burners are assembled correctly.
^ the gas valve is open.
^ the burners are dry and clean.
^ the flame holes in the burners are
clean and unblocked.
^ the igniter are wet.
^ the cooktop is plugged in and that
the circuit breaker has not tripped. If
lack of power is the problem, the
cooktop can be lit with a match. See
"Using the cooktop during a power
failure".
15
After sales service
In the event of a fault which you cannot
correct, contact the Miele Technical
Service Department:
U 1-800-999-1360
l 1-800-565-6435
When contacting the Technical Service
Department, please quote the model
and serial number of your appliance.
These are shown on the data plate.
Adhere data plate sticker here:
16
Help protect our environment
Disposal of packing materials
Disposal of an old appliance
The cardboard box and packing
materials are environmentally friendly
for disposal. Please recycle.
Old appliances contain materials that
can be recycled. Please contact your
local recycling center about the
possibility of recycling these materials.
Before discarding an old appliance,
disconnect it from the gas and
electrical supply and cut off the
power cord to prevent it from
becoming a hazard.
17
18
19
Alterations rights reserved / 0205
M.-Nr. 05 060 871 / 01
en - US
|