MicroBoards Technology CWT Series User Manual

CWT Series  
Users Manual  
Version 2.2  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
TABLE OF CONTENTS  
System Overview..................................................................................................5  
Unpacking your system.........................................................................................5  
Microboards Statement Regarding Improper Duplication .....................................5  
Installation Requirements .....................................................................................6  
Main Menu............................................................................................................7  
Copy Disc to Disc..................................................................................................7  
Copy CD+G ..........................................................................................................7  
Simulation Disc to Disc .........................................................................................7  
Erasing RW media................................................................................................8  
Setup Menu ..........................................................................................................9  
Mode Select................................................................................................10  
CD WR Speed ............................................................................................10  
ISRC Check................................................................................................10  
Auto Run.....................................................................................................10  
Copy Quantity.............................................................................................10  
Session Mode.............................................................................................10  
Reader Select.............................................................................................10  
Drive Inquiry................................................................................................10  
F/W Version................................................................................................10  
F/W Update.................................................................................................10  
Log..............................................................................................................10  
Error Codes ........................................................................................................11  
Specifications......................................................................................................17  
Supported Formats .............................................................................................17  
Firmware Updates...............................................................................................17  
Technical Support...............................................................................................17  
3
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
4
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
System Overview  
The CWT Series employs up to 10 General Purpose CD recorders.  
An intuitive, menu driven  
display and 5-button control  
interface provide one-touch  
operation for the novice user  
COPY START  
(DISC to DISC)  
while providing advanced  
features for the professional.  
Advanced Features:  
Stand-Alone CD-R duplicator  
One Touch duplication  
Auto Run option  
Speed selectable (4x to 48x for CD-R)  
Supports writing to CD-R/RW  
Copy and Verify  
Counter feature allows the user to input how many discs need to be copied and  
the keeps track of the total discs completed.  
Simulation mode to ensure recording stability  
Easy-to-read, two-line display for status and error reporting  
Updates easily installed through CD reader  
Unpacking your system  
When unpacking your duplicator, confirm the following items are included:  
CWT Series duplicator  
Power cable  
Quick Start Guide  
Starter Kit (includes User’s Manual and Warranty information)  
If any of these items are missing, please contact or Microboards Technology Technical Support at  
952-556-1639.  
IMPORTANT: Please keep all the packing for your CWT Series duplicator. If your unit ever  
needs to be sent in for service, it must be returned in the original packing or the warranty will be  
voided.  
Microboards Statement Regarding Improper Duplication  
Microboards Technology fully supports the right of any business, organization, group, or  
individual to protect their property from unlicensed, unauthorized, or illegal duplication.  
As a user of our equipment, we expect you to support that right as well.  
Microboards Technology is neither responsible nor liable for the infringement of any laws  
regarding the illegal duplication of property. Microboards Technology products are in no way  
intended to encourage or condone such duplication.  
5
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Installation Requirements  
System Setup  
Connect the power cable to the CWT Series tower and plug in to a protected power outlet  
strip or UPS power supply.  
Turn on power to the tower. The system is now ready to use.  
Install your CWT Series duplicator in the following environment:  
On a level and stable surface  
In a well ventilated location  
Temperature and humidity  
Temperature: 5-40°  
Humidity: 20-80%RH (no dew formation)  
Do not install it in the following places:  
ƒ
Under direct sunlight (If the machine is exposed to sunlight, the light should be blocked  
by a curtain or blind.)  
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
A dusty location  
A place where there is a lot of vibration  
Near open flame  
A place where the temperature and humidity change drastically  
Near a heating device such as a heater or furnace  
A location where air from an air conditioner blows directly onto the unit  
Near a container filled with water such as a vase  
In winter during times of low humidity or in a location where static electricity is  
generated, use an anti-static-electricity mat or humidifier to prevent static electricity.  
Power supply  
ƒ
ƒ
Use house current as the power source for the unit.  
Do not use an outlet near a motor driven appliance (i.e. air conditioner, copying  
machine).  
ƒ
ƒ
Use an outlet with stable power supply voltages.  
Do not overload an outlet. Do not use a service outlet from a PCs or other office  
machine.  
ƒ
ƒ
ƒ
Wire the power cord properly.  
Do not touch the power cord with a wet hand.  
Be careful not to damage the power cord.  
Inspect the power cord periodically.  
In the event that the power cord is damaged, replace the power cord.  
Be sure to use a tool such as the screwdriver to change the 115/230V Switch.  
Do not use your finger.  
6
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Main Menu  
The Arrow buttons (▼▲) allow you to move forward or backward in the menu without selecting  
the current menu item. The NO button will move you to the next menu item. YES will select the  
current menu item.  
YES  
ANALYZING MASTER  
COPY  
15:26  
20%  
COPY START?  
(DISCtoDISC)  
CD-DA  
NO,  
YES  
ANALYZING MASTER  
COPY  
15:26  
20%  
COPY CD+G START?  
(DISCtoDISC)  
CD-DA  
NO,▼  
YES  
SIMULATION?  
(DISCtoDISC)  
ANALYZING MASTER  
>QUICK ERASE?  
SIMULATION 15:26  
CD-DA  
20%  
ESC  
ESC  
NO,▼  
YES  
YES  
YES  
DISC ERASE?  
(REWRITABLE)  
SURE ?  
DISC ERASE  
Please wait...  
YES  
YES  
NO,▼  
NO,▼  
>QUICK ERASE?  
SURE ?  
DISC ERASE  
Please wait...  
NO,▼  
>EXIT?  
NO,▼  
YES  
SETUP?  
SETUP MENU  
(see pg 9)  
(MODE CHANGE)  
NO/ESC  
Copy Disc to Disc  
1. Place the Master Disc into the Reader drive.  
Place the blank disc(s) into the Recorder drive(s) and wait for the light(s) on the front of  
the Recorder(s) to stop blinking.  
Copy Start?  
(DISC to DISC)  
2. The display reads COPY START? (DISC to DISC).  
3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when  
the master is loaded and all drives are loaded with blank media.  
4. The drive trays will open on any recorder without blank discs installed. If you do not want  
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and  
then press the YES button to start the copy job.  
5. The display will now show the progress of the Copy Job.  
COPY  
CD  
425.0MB  
25%  
6. The Recorder(s) will eject the recorded discs when the job is complete.  
Copy CD+G  
Use this menu to copy CD+G discs.  
Follow the steps listed in the Copy Disc to Disc section above.  
Simulation Disc to Disc  
1. At the COPY START? (DISC to DISC) menu, press the NO or button until the display  
shows SIMULATION? (DISC to DISC).  
SIMULATION??  
(DISC to DISC)  
2. Place the Master Disc into the Reader drive  
7
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
3. Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on  
the front of the Recorder(s) to stop blinking.  
4. Press YES.  
5. The drive trays will open on any recorder without blank discs installed. If you do not want  
to make a copy in those drives, close the tray(s), wait for the drive light to go out, and  
then press the YES button to start the copy job.  
6. The display will now show the progress of the Simulation Copy Job  
SIMULATION  
CD  
425.0MB  
25%  
7. The Recorder(s) will eject the still-blank discs when the job is complete.  
Erasing RW media  
1. At the COPY START? (DISC to DISC) menu, press the NO or button until the display  
shows DISC ERASE? (REWRITABLE):  
DISC ERASE?  
(REWRITABLE)  
2. Load the Recorder(s) with the CD-RW media you wish to erase. You can erase one disc  
at a time or fill all the Recorders to erase multiple discs at once. All discs loaded must be  
of the same type.  
3. Press the YES button  
4. The next screen asks if you want to perform a Quick Erase.  
QUICK ERASE?  
If you wish to perform a Full Erase, press the NO button.  
FULL ERASE?  
Pressing the YES button at either of these selections will show the following screen:  
SURE?  
5. Press the YES button if you are sure you want to erase the RW disc. If you do not wish  
to erase the disc, press the NO button and you will go back to the DISC ERASE screen  
(step 1).  
6. The screen will now show:  
DISC ERASE  
7. Once the erasing is complete, the Recorder(s) will eject the disc(s).  
8
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Setup Menu  
Yes  
Yes  
Yes  
SETUP  
MODE SELECT?  
(COPY MODE)  
COPY?  
(DISC to DISC)  
VERIFY?  
(DISC to DISC)  
COPY + V?  
(DISC to DISC)  
EXIT?  
COPY?  
CD WR SPEED?  
(MAX)  
MAX?  
48X?  
4X?  
EXIT?  
MAX?  
ISRC CHECK?  
(OFF)  
ISRC ON?  
ON?  
ISRC OFF?  
OFF?  
EXIT?  
ISRC ON?  
Yes  
Yes  
Auto Run?  
(OFF)  
Yes  
COPY QUANTITY?  
(xxxx/xxxx)  
COPY QUANTITY?  
0---  
Yes  
Session Mode?  
(AUTO)  
AUTO?  
CLOSE?  
OPEN?  
EXIT?  
AUTO?  
Yes  
Reader Select?  
(DRIVExx)  
DRIVE01  
READER  
THE DISPLAY WILL CYCLE  
THROUGH THE MAKE, MODEL,  
AND FIRMWARE OF THE  
SELECTED DRIVE UNTIL YOU  
PRESS A BUTTON.  
DRIVE02  
RECORDER  
DRIVExx  
RECORDER  
DRIVE01  
READER  
EXIT?  
Yes  
DRIVE INQUIRY?  
DRIVE01  
READER  
THE DISPLAY WILL CYCLE  
THROUGH THE MAKE, MODEL,  
AND FIRMWARE OF THE  
SELECTED DRIVE UNTIL YOU  
PRESS A BUTTON.  
DRIVE02  
RECORDER  
DRIVExx  
RECORDER  
EXIT?  
DRIVE01  
READER  
F/W VERSION  
F/W UPDATE  
Premium 1020  
VER A.BC  
H/W INFO  
12ΦπρΨ  
EXIT?  
Premium 1020  
VER A.BC  
Yes  
Yes  
Yes  
INSERT  
PROGRAM DISC  
Checking  
UPDATE?  
Updating  
Complete  
VER a.bc -> b.cd  
LOG?  
EXIT?  
OK xxxxxxx  
NG xxxxxxx  
KEY  
Yes  
Caption indicates button to press  
No caption indicates display sequence  
(Back), NO, or (Forward)  
MODE SELECT?  
(COPY MODE)  
YES (Accept) or ESC (Return to Menu)  
9
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Setup Menu  
1. At the COPY START? (DISC to DISC) menu, press the NO or button until the display  
shows SETUP? (MODE CHANGE)  
SETUP?  
(MODE CHANGE)  
2. Press the YES button  
3. The first setup option is Mode Select, followed by Write Speeds, ISRC Check, Copy  
Quantity, Session Mode, Drive Inquiry, Firmware Version and Exit.  
4. Pressing the NO or button will allow you to move from menu to menu.  
5. Pressing the YES button will allow you to view or change the configuration of the system.  
6. Please follow the flow chart on page 9 to navigate through the different menus.  
Here is a description of each setup menu item:  
Mode Select  
COPY - Duplication from master disc to blank disc.  
VERIFY - It compares a copied disc with the master disc.  
COPY+V - Copying in the COPY+VERIFY mode  
CD WR Speed  
Available speeds range from 52x down to 4x.  
ISRC Check  
Default setting is ON. This feature will copy the ISRC codes from the Master audio disc to the  
blank discs.  
Auto Run  
Default setting is OFF. When set to ON, this allows the duplicator to start the duplication process  
when all recorders are loaded with blank media. The master must also be loaded before  
duplication will begin.  
>>COPY QUANTITY  
Copy Quantity  
Set up the number of disc you want to copy.  
0750  
Use the ▼▲buttons to change the number in the current column up or down. YES will move you  
one column to the right, NO will move you 1 column to the left. Press YES when in the right  
column to save the number of copies entered. The example above shows that 750 copies have  
been entered with the cursor currently in the right column (underlined).  
Session Mode  
Select either from AUTO, CLOSE, or OPEN.  
AUTO: Make the session of copied disc as same as the master.  
CLOSE: Close the session of copied disc.  
OPEN: Leave the session of copied disc open.  
Reader Select  
Changes which drive is selected as the reader. This setting should not be changed.  
Drive Inquiry  
Displays an inquiry of each drive connected, showing drive model and firmware.  
F/W Version  
Shows CWT Series firmware version and H/W information.  
F/W Update  
Used when updating the firmware of the CWT Series duplicator.  
Log  
Displays the number of successful and unsuccessful discs over the entire life of the duplicator.  
10  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Error Codes  
Read Errors  
ASC  
00  
ASCQ  
00  
Description  
NO ADDITIONAL SENSE INFORMATION  
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED  
AUDIO PLAY OPERATION IN PROGRESS  
AUDIO PLAY OPERATION PAUSE  
00  
00  
00  
06  
11  
12  
00  
00  
00  
00  
01  
13  
14  
15  
17  
AUDIO PLAY OPERATION SUCCESSFULLY COMPLETED  
AUDIO PLAY OPERATION STOPPED DUE TO ERROR  
NO CURRENT AUDIO STATUS TO RETURN  
CLEANINF REQUESTED  
00  
NO INDEX/SECTOR SIGNAL  
02  
04  
04  
04  
04  
04  
05  
06  
08  
08  
08  
08  
09  
09  
09  
09  
0A  
0B  
0B  
0B  
10  
11  
11  
11  
11  
11  
11  
12  
13  
14  
14  
14  
15  
15  
15  
17  
17  
17  
17  
17  
00  
00  
01  
02  
03  
07  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
00  
01  
02  
00  
01  
02  
05  
06  
0F  
10  
00  
00  
01  
05  
06  
00  
01  
02  
00  
01  
02  
03  
04  
NO SEEK COMPLETE  
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE  
LOGICAL UNIT IS IN PROCESS OF BECOMING READY  
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUESTED  
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED  
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS  
LOGICAL UNIT DOES NOT RESPOND TO SELECTION  
NO REFERENCE POSITION FOUND (medium may be upside down)  
LOGICAL UNIT COMMUNICATION FAILURE  
LOGICAL UNIT COMUUNICATION TIME-OUT  
LOGICAL UNIT COMMUNICATION PARITY ERROR  
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)  
TRACK FOLLOWING ERROR  
TRACKING SERVO FAILURE  
FOCUS SERVO FAILURE  
SPINDLE SERVO FAILURE  
ERROR LOG OVERFLOW  
WARNING  
WARNING-SPECIFIED TEMPERATURE EXCEEDED  
WARNING-ENCLOSURE DEGRADED  
ID CRC OR ECC ERROR  
UNRECOVERED READ ERROR  
ERROR TOO LONG TO CORRECT  
L-EC UNCORRECTABLE ERROR  
CIRC UNRECOVERED ERROR  
ERROR READING UPC/EAN NUMBER  
ERROR – LOSS PF STREAMING  
ADDRESS MARK NOT FOUND FOR ID FIELD  
ADDRESS MARK NOT FOUND FOR DATA FIELD  
RECORD NOT FOUND  
RECORD NOT FOUND – RECOMMEND REASSIGNMENT  
RECORD NOT FOUND – DATA AUTO – REALLOCATED  
RANDOM POSITIONING ERROR  
MECHANICAL POSITIONING ERROR  
POSITIONING ERROR DETECTED BY READ OF MEDIUM  
RECOVERED DATA WITH NO EEOR CORRECTION APPLIED  
RECOVERED DATA WITH RETRIES  
RECOVERED DATA WITH POSITIVE HEAD OFFSET  
RECOVERED DATA WITH NEGATIVE HEAD OFFSET  
RECOVERED DATA WITH RETIES AND/OR CIRC APPLIED  
17  
05  
RECOVERED DATA USING PREVIOUS SECTOR ID  
RECOVERED DATA WITH ERROR CORRECTION APPLIED  
RECOVERED DATA WITH ERROR CORP. & RETRIES APPLIED  
RECOVERED DATA WITH CIRC  
RECOVERED DATA WITH L-EC  
PARAMETER LIST LENGTH ERROR  
18  
18  
18  
18  
1A  
1B  
1E  
00  
01  
03  
04  
00  
00  
00  
SYNCHRONOUS DATA TRANSFER ERROR  
RECOVERED ID WITH ECC CORRECTION  
11  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
20  
00  
00  
00  
00  
00  
01  
02  
03  
04  
00  
00  
01  
02  
03  
04  
00  
01  
02  
03  
00  
00  
05  
00  
00  
01  
02  
03  
00  
01  
02  
03  
04  
00  
00  
01  
02  
0F  
11  
12  
13  
14  
15  
16  
00  
00  
01  
02  
00  
01  
02  
03  
NN  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
INVALID COMMAND OPERATION CODE  
LOGICAL BLOCK ADDRESS OUT OF RANGE  
INVALID FIELD IN CDB  
LOGICAL UNIT NOT SUPPORTED  
INVALID FIELD IN PARAMETER LIST  
PARAMETER NOT SUPPORTED  
21  
24  
25  
26  
26  
26  
26  
26  
28  
29  
29  
29  
29  
29  
2A  
2A  
2A  
2A  
2B  
2C  
2C  
2F  
30  
30  
30  
30  
35  
35  
35  
35  
35  
39  
3A  
3A  
3A  
3B  
3B  
3B  
3B  
3B  
3B  
3B  
3D  
3E  
3E  
3E  
3F  
3F  
3F  
3F  
40  
43  
44  
45  
46  
47  
48  
49  
4A  
4B  
4C  
PARAMETER VALUE INVALID  
THRESHOLD PARAMETERS NOT SUPPORTED  
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
POWER ON OCCURRED  
SCSI BUS RESET OCCURRED  
BUS DEVICE RESET FUNCTION OCCURRED  
DEVICE INTERNAL RESET  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
LOG PARAMETERS CHANGED  
RESERVATIONS PREEMPTED  
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT  
COMMAND SEQUENCE ERROR  
PERSISTENT PREVENT CONFLICT  
COMMANDS CLEARED BY ANOTHER INITIATOR  
INCOMPATIBLE MEDIUM INSTALLED  
CANNOT READ MEDIUM - UNKNOWN FORMAT  
CANNOT READ MEDIUM – INCOMPATIBLE FORMAT  
CLEASNING CARTRIDGE INSTALLED  
ENCLOSURE SERVICES FAILURE  
UNSUPPORTED ENCLOSURE FUNCTION  
ENCLOSURE SERVICES UNAVAILABLE  
ENCLOSURE SERVICES TRANSFER FAILURE  
ENCLOSURE SERVICES TRANSFER REFUSED  
SAVING PARAMETERS NOT SUPPORTED  
MEDIUM NOT PRESENT  
MEDIUM NOT PRESENT-TRAY CLOSED  
MEDIUM NOT PRESENT-TRAY OPEN  
END OF MEDIUM REACHED  
MEDIUM MAGAZINE NOT ACCESSIBLE  
MEDIUM MAGAZINE REMOVED  
MEDIUM MAGAZINE INSERTED  
MEDIUM MAGAZINE LOCKED  
MEDIUM MAGAZINE UNLOCKED  
MECHANICAL POSITIONING OR CHANGER ERROR  
INVALID BITS IN IDENTIFY MESSAGE  
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET  
LOGICAL UNIT FAILURE  
TIMEOUT ON LOGICAL UNIT  
TARGET OPERATING CONDITIONS HAVE CHANGED  
MICROCODE HAS BEEN CHANGED  
CHANGED OPERATING DEFINITION  
INQUIRY DATA HAS CHANGED  
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)  
MESSAGE ERROR  
INTERNAL TARGET FAILURE  
SELECT OR RESELECT FAILURE  
UNSUCCESSFUL SOFT RESET  
SCSI PARITY ERROR  
INITIATOR DETECTED ERROR MESSAGE RECEIVED  
INVALID MESSAGE ERROR  
COMMAND PHASE ERROR  
DATA PHASE ERROR  
LOGICAL UNIT FAILED SELF-CONFIGURATION  
12  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
4D  
NN  
00  
00  
02  
00  
00  
00  
01  
00  
01  
02  
03  
00  
01  
FF  
00  
01  
02  
03  
04  
00  
01  
00  
00  
00  
xx  
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)  
OVAERLAPPED COMMANDS ATTEMPTED  
MEDIA LOAD OR EJECTED FAILED  
MEDIUM REMOVAL PREVENTED  
SYSTEM RESOURCE FAILURE  
UNABLE TO RECOVER TABLE-OF-CONTENTS  
OPERATOR REQUEST OR STATE CHANGE INPUT  
OPERATOR MEDIUM REMOVAL REQUEST  
LOG EXCEPTION  
THRESHOLD CONDITION MET  
LOG COUNTER AT MAXIMUM  
4E  
53  
53  
55  
57  
5A  
5A  
5B  
5B  
5B  
5B  
5D  
5D  
5D  
5E  
5E  
5E  
5E  
5E  
63  
LOG LIST CODES EXHAUSTED  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Logical Unit Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)  
LOW POWER CONDITION ON  
IDLE CONDITION ACTIVATED BY TIMER  
STANDBY CONDITION ACTIVATED BY COMMAND  
IDLE CONDITION ACTIVATED BY COMMAND  
STANDBY CONDITION ACTIVATED BY COMMAND  
END OF USER AREA ENCOUNTERED ON THIS TRACK  
PACKET DOES NOT FIT IN AVAILABLE SPACE  
ILLEGAL MODE FOR THIS TRACK  
63  
64  
65  
73  
80  
VOLTAGE FAULT  
CD CONTROL ERROR  
VENDOR SPECIFIC  
Write Errors  
ASC  
00  
00  
00  
00  
00  
00  
00  
02  
04  
04  
04  
04  
04  
04  
04  
05  
06  
08  
08  
08  
08  
09  
09  
09  
09  
0A  
0B  
0B  
0B  
0C  
0C  
ASCQ  
00  
06  
11  
12  
13  
14  
15  
00  
00  
01  
02  
03  
04  
07  
08  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
00  
01  
02  
00  
02  
Description  
NO ADDITIONAL SENSE INFORMATION  
I/O PROCESS TERMINATED, PLAY OPERATION ABORTED  
AUDIO PLAY OPERATION IN PROGRESS  
AUDIO PLAY OPERATION PAUSED  
AUDIO PLAY OPERATION SUCCESSFULLY  
AUDIO PLAY OPERATION STOPPED DUE TO ERRPOR  
NO CURRENT AUDIO STATUS TO RETURN  
NO SEEK COMPLETE  
LOGICAL UNIT NOT READY, CAUSE NOT REPORTABLE  
LOGICAL UNIT IS IN PROCESS OF BECOMING READY  
LOGICAL UNIT NOT READY, INITIALIZING CMD. REQUIRED  
LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED  
LOGICAL UNIT NOT READY, FORMAT IN PROGRESS  
LOGICAL UNIT NOT READY, OPERATION IN PROGRESS  
LOGICAL UNIT NOT READY, LONG WRITE IN PROGRESS  
LOGICAL UNIT DOES NOT RESPOND TO SELECTION  
NO REFERENCE POSITION FOUND  
LOGICAL UNIT COMMUNICATION FAILURE  
LOGICAL UNIT COMUUNICATION TIME-OUT  
LOGICAL UNIT COMMUNICATION PARITY ERROR  
LOGICAL UNIT COMMUNICATION CRC ERROR (ULTRA-DMA/32)  
TRACK FOLLOWING ERROR  
TRACKING SERVO FAILURE  
FOCUS SERVO FAILURE  
SPINDLE SERVO FAILURE  
ERROR LOG OVERFLOW  
WARNING  
WARNING-SPECIFIED TEMPERATURE EXCEEDED  
WARNING-ENCLOSURE DEGRADED  
WRITE ERROR  
WRITE ERROR-RECOVERED WITH AUTO REALLOCATION  
13  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
0C  
03  
07  
08  
09  
0A  
00  
06  
00  
01  
02  
00  
01  
02  
03  
04  
00  
01  
02  
03  
04  
05  
06  
07  
08  
09  
00  
01  
02  
03  
04  
05  
06  
07  
00  
01  
02  
03  
00  
00  
00  
01  
02  
00  
00  
00  
02  
00  
00  
00  
01  
02  
03  
04  
00  
01  
02  
03  
04  
05  
06  
00  
00  
WRITE ERROR-RECOMMEND REASSIGNMENT  
WRITE ERROR-RECOVERY NEEDED  
WRITE ERROR-RECOVERY FAILED  
WRITE ERROR-LOSS OF STREAMING  
WRITE ERROR-PADDING BLOCKS ADDED  
UNRECOVERED READ ERROR  
CIRC UNRECOVERED ERROR  
RANDOM POSITIONING ERROR  
MECHANICAL POSITIONING ERROR  
POSITIONING ERROR DETECTED BY READ OF MEDIUM  
DATA SYNCHRONIZATION MARK ERROR  
DATA SYNC ERROR-DATA REWRITTEN  
DATA SYNC ERROR-RECOMMEND REWRITE  
DATA SYNC ERROR-DATA ATUO-REALLOCATED  
DATA SYNC ERROR-RECOMMEND REASSIGNMENT  
RECOVERED DATA WITH NO ERROR CORRECTION APPLIED  
RECOVERED DATA WITH RETRIES  
RECOVERED DATA WITH POSITIVE HEAD OFFSET  
RECOVERED DATA WITH NEGATIVE HEAD OFFSET  
RECOVERED DATA WITH RETRIES AND/OR CIRC APPLIED  
RECOVERED DATA USING PREVIOUS SECTOR ID  
RECOVERED DATA WITHOUT ECC - DATA AUTO-REALLOCATED  
RECOVERED DATA WITHOUT ECC - RECOMMEND REASSIGNMENT  
RECOVERED DATA WITHOUT ECC - RECOMMEND REWRITE  
RECOVERED DATA WITHOUT ECC - DATA REWRITTEN  
RECOVERED DATA WITH ERROR CORRECTION APPLIED  
RECOVERED DATA WITH ERROR CORR. & RETRIES APPLIED  
RECOVERED DATA - DATA AUTO-REALLOCATED  
RECOVERED DATA WITH CIRC  
0C  
0C  
0C  
0C  
11  
11  
15  
15  
15  
16  
16  
16  
16  
16  
17  
17  
17  
17  
17  
17  
17  
17  
17  
17  
18  
18  
18  
18  
18  
18  
18  
18  
19  
19  
19  
19  
1A  
1B  
1C  
1C  
1C  
1D  
20  
21  
21  
24  
25  
26  
26  
26  
26  
26  
27  
27  
27  
27  
27  
27  
27  
28  
29  
RECOVERED DATA WITH L-EC  
RECOVERED DATA - RECOMMEND REASSIGNMENT  
RECOVERED DATA - RECOMMEND REWRITE  
RECOVERED DATA WITH ECC - DATA REWRITTEN  
DEFECT LIST NOT ERROR  
DEFECT LIST NOT AVAILABLE  
DEFECT LIST ERROR IN PRIMARY LIST  
DEFECT LIST ERROR IN GROWN LIST  
PARAMETER LIST LENGTH ERROR  
SYNCHRONOUS DATA TRANSFER ERROR  
DEFECT LIST NOT FOUND  
PRIMARY DEFECT LIST NOT FOUND  
GROWN DEFECT LIST NOT FOUND  
MISCOMPARE DURING VERIFY OPERATION  
INVALID COMMAND OPERATION CODE  
LOGICAL BLOCK ADDRESS OUT OF RANGE  
INVALID ADDRESS FOR WRITE  
INVALID FIELD IN CDB  
LOGICAL UNIT NOT SUPPORTED  
INVALID FIELD IN PARAMETER LIST  
PARAMETER NOT SUPPORTED  
PARAMETER VALUE INVALID  
THRESHOLD PARAMETERS NOT SUPPORTED  
INVALID RELEASE OF ACTIVE PERSISTENT RESERVATION  
WRITE PROTECTED  
HARDWARE WRITE PROTECTED  
LOGICAL UNIT SOFTWARE WRITE PROTECTED  
ASSOCIATED WRITE PROTECT  
PERSISTENT WRITE PROTECT  
PERSISTENT WRITE PROTECT  
CONDITIONAL WRITE PROTECT  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
14  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
29  
01  
02  
03  
04  
00  
01  
02  
03  
00  
00  
00  
00  
00  
01  
00  
03  
04  
05  
00  
00  
00  
01  
02  
05  
06  
08  
09  
00  
01  
00  
01  
00  
01  
02  
03  
04  
00  
00  
00  
01  
02  
00  
00  
01  
02  
00  
01  
02  
03  
NN  
00  
00  
00  
00  
00  
00  
00  
00  
00  
00  
NN  
00  
POWER ON OCCURRED  
SCSI BUS RESET OCCURRED  
BUS DEVICE RESET FUNCTION OCCURRED  
DEVICE INTERNAL RESET  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
LOG PARAMETERS CHANGED  
RESERVATIONS PREEMPTED  
COPY CANNOT EXECUSE SINCE HOST CANNOT DISCONNECT  
COMMAND SEQUENCE ERROR  
NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED  
POWER ON, RESET, OR BUS DEVICE RESET OCCURRED  
PARAMETERS CHANGED  
MODE PARAMETERS CHANGED  
COMMAND SEQUENCE ERROR  
CURRENT PROGRAM AREA IS NOT EMPTY  
CURRENT PROGRAM AREA IS EMPTY  
PERSISTENT PREVENT CONFLICT  
INSUFFICIENT TIME FOR OPERATION  
COMMANDS CLEARED BY ANOTHER INITIATOR  
INCOMPATIBLE MEDIUM INSTALLED  
CANNOT READ MEDIUM - UNKNOWN FORMAT  
CANNOT READ MEDIUM - INCOMPATIBLE FORMAT  
CANNOT WRITE MEDIUM - INCOMPATIBLE FORMAT  
CANNOT FORMAT MEDIUM - INCOMPATIBLE MEDIUM  
CANNOT WRITE - APPLICATION CODE MISMATCH  
CURRENT SESSION NOT FIXATED FOR APPEND  
MEDIUM FORMAT CORRUPTED  
29  
29  
29  
2A  
2A  
2A  
2A  
2B  
2C  
28  
29  
2A  
2A  
2C  
2C  
2C  
2C  
2E  
2F  
30  
30  
30  
30  
30  
30  
30  
31  
31  
32  
32  
35  
35  
35  
35  
35  
37  
39  
3A  
3A  
3A  
3D  
3E  
3E  
3E  
3F  
3F  
3F  
3F  
40  
43  
44  
45  
46  
47  
48  
49  
4A  
4B  
4C  
4D  
4E  
FORMAT COMMAND FAILED  
NO DEFECT SPARE LOCATION AVAILABLE  
DEFECT LIST UPDATE FAILURE  
ENCLOSURE SERVICES FAILURE  
UNSUPPORTED ENCLOSURE FUNCTION  
ENCLOSURE SERVICES UNAVAILABLE  
ENCLOSURE SERVICES TRANSFER FAILURE  
ENCLOSURE SERVICES TRANSFER REFUSED  
ROUNDED PARAMETER  
SAVING PARAMETERS NOT SUPPORTED  
MEDIUM NOT PRESENT  
MEDIUM NOT PRESENT - TRAY CLOSED  
MEDIUM NOT PRESENT - TRAY OPEN  
INVALID BITS IN IDENTIFY MESSAGE  
LOGICAL UNIT HAS NOT SELF-CONFIGURED YET  
LOGICAL UNIT FAILURE  
TIMEOUT ON LOGICAL UNIT  
TARGET OPERATING CONDITIONS HAVE CHANGED  
MICROCODE HAS BEEN CHANGED  
CHANGED OPERATING DEFINITION  
INQUIRY DATA HAS CHANGED  
DIAGNOSTIC FAILURE ON COMPONENT NN (80H-FFH)  
MESSAGE ERROR  
INTERNAL TARGET FAILURE  
SELECT OR RESELECT FAILURE  
UNSUCCESSFUL SOFT RESET  
SCSI PARITY ERROR  
INITIATOR DETECTED ERROR MESSAGE RECEIVED  
INVALID MESSAGE ERROR  
COMMAND PHASE ERROR  
DATA PHASE ERROR  
LOGICAL UNIT FAILED SELF-CONFIGURATION  
TAGGED OVERLAPPED COMMANDS (NN=QUEUE TAG)  
OVAERLAPPED COMMANDS ATTEMPTED  
15  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
51  
00  
01  
00  
02  
00  
00  
00  
01  
02  
03  
00  
01  
02  
03  
00  
01  
03  
FF  
00  
01  
02  
03  
04  
00  
00  
01  
00  
00  
01  
02  
03  
04  
05  
00  
01  
02  
03  
04  
05  
06  
00  
00  
FF  
ERASE FAILURE  
ERASE FAILURE - Incomplete erase operation detected  
MEDIA LOAD OR EJECT FAILED  
MEDIUM REMOVAL PREVENTED  
SYSTEM RESOURCE FAILURE  
UNABLE TO RECOVER TABLE-OF-CONTENTS  
OPERATOR REQUEST OR STATE CHANGE INPUT  
OPERATOR MEDIUM REMOVAL REQUEST  
OPERATOR SELECTED WRITE PROTECT  
OPERATOR SELECTED WRITE PERMIT  
LOG EXCEPTION  
51  
53  
53  
55  
57  
5A  
5A  
5A  
5A  
5B  
5B  
5B  
5B  
5D  
5D  
5D  
5D  
5E  
5E  
5E  
5E  
5E  
63  
64  
64  
65  
72  
72  
72  
72  
72  
72  
73  
73  
73  
73  
73  
73  
73  
B6  
B9  
80  
THRESHOLD CONDITION MET  
LOG COUNTER AT MAXIMUM  
LOG LIST CODES EXHAUSTED  
FAILURE PREDICTION THRESHOLD EXCEEDED -  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Media Failure  
FAILURE PREDICTION THRESHOLD EXCEEDED - Predicted Spare Area Exhaustion  
FAILURE PREDICTION THRESHOLD EXCEEDED (FALSE)  
LOW POWER CONDITION ON  
IDLE CONDITION ACTIVATED BY TIMER  
STANDBY CONDITION ACTIVATED BY COMMAND  
IDLE CONDITION ACTIVATED BY COMMAND  
STANDBY CONDITION ACTIVATED BY COMMAND  
END OF USER AREA ENCOUNTERED ON THIS TRACK  
ILLEGAL MODE FOR THIS TRACK  
INVALID PACKET SIZE  
VOLTAGE FAULT  
SESSION FIXATION ERROR  
SESSION FIXATION ERROR WRITING LEAD-IN  
SESSION FIXATION ERROR WRITING LEAD-OUT  
SESSION FIXATION ERROR - INCOMPATIBLE TRACK IN SESSION  
EMPTY OR PARTIALLY WRITTEN RESERVED TRACK  
NO MORE RZONE RESERVATIONS ARE ALLOWED  
CD CONTROL ERROR  
POWER CALIBRATIOIN AREA ALMOST FULL  
POWER CALIBRATION AREA IS FULL  
POWER CALIBRATION AREA ERROR  
PROGRAM MEMORY AREA UPDATE FAILURE  
PROGRAM MEMORY AREA/RMA IS FULL  
PROGRAM MEMORY AREA/RMA IS (almost) FULL  
MEDIA LOAD/EJECT MECHANISM FAILED  
PLAY OPERATION ABORTED  
VENDOR SPECIFIC  
16  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Specifications  
Recorder Drive:  
Power Source:  
Weight:  
CD-R/RW Recorder  
115V/230V 50-60Hz switchable power supply  
58 pounds  
Dimensions:  
Power supply:  
Environment:  
7.48” (W) x 16.75” (D) x 24.5” (H)  
400W  
Temperature: 40°C (104°F) / 5°C (41°F)  
Humidity: 20% - 80%  
Supported Formats  
CD-ROM Mode 1, CD-ROM XA Mode 2 (form 1, form 2),  
Photo CD, CD-DA (Audio CD), CD-Extra, CD-R, CD-RW  
Recording format  
CD  
Recording capacity (nominal)  
Applicable media  
CD  
CD  
700MB  
CD-R, CD-RW  
Firmware Updates  
Occasionally it may be necessary to load updated firmware on to the CWT Series duplicator.  
Only those firmware versions recommended and provided by Microboards Technical Support for  
this specific product should be installed. Installation of an incorrect firmware on any Microboards  
Technology product may result in any remaining warranty being voided.  
Technical Support  
For technical questions or support issues, contact Microboards Technology technical support:  
United States  
PH: 952-556-1639  
FAX: 952-556-1628  
Europe  
PH: +44 (0) 845 230 7800  
Japan  
PH: 03-3561-2266  
Please have the Model and Serial Number of your duplicator available when contacting Technical  
Support.  
17  
CWT Series  
MICROBOARDS TECHNOLOGY, LLC  
Any unauthorized modification to this equipment may result in the revocation by the FCC of the user’s  
authority to operate this equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not  
installed and used in accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and antenna  
Connect the equipment into an outlet on a circuit different than that to which the receiver is connected  
Consult the dealer or an experienced radio/TV technician for help  
This product is in conformity with the EMC Directive (89/336/EEC) through compliance with the following European  
standards: EN 55022, EN 55024. The CE mark has been affixed in accordance with the CE Marking Directive  
93/68/EEC.  
Canadian Department of Communications (DOC) Statement  
This Class B digital apparatus complies with the Canadian ICES-003 Issue 4:2004. Cet appareil numerique de la classe B est conforme a  
la norme NMB-003 du Canade.  
.
18  

IBM T54A User Manual
InFocus Conference Phone MVP100 User Manual
Intel 8XC251SA User Manual
JVC InteriArt AV 32X37HKE User Manual
Kenwood DPX 7010MD User Manual
Liebert MR1 User Manual
Motorola T325 Wireless Bluetooth Car Hands free Kit T325 User Manual
Nvidia Computer Hardware User Manual
Philips 17GR2746 User Manual
Philips HNB7190T User Manual