Memorex MT1130C User Manual

15. Lightning - For added protection for this TV during a lightning storm, or when it is left unattended  
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or  
cable system. This will prevent damage to the TV due to lighting and power-line surges.  
16. Power Lines - An outside antenna system should not be located in the vicinity of overhead power  
lines or other electric light or power circuits, or where it can fall into such power lines or circuits.  
When installing an outside antenna system, extreme care should be taken to keep from touching  
such power lines or circuits as contact with them might be fatal.  
17. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles  
as this can result in a risk of fire or electric shock.  
18. Object and Liquid Entry - Never push objects of any kind into this TV through openings as they  
may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the TV.  
IMPORTANT SAFEGUARDS  
1. Read instructions - All the safety and operating instructions should be read before the TV is  
COLOR TELEVISION  
MT1130C  
INSTRUCTION MANUAL  
ENGLISH  
operated.  
2. Retain Instructions - The safety and operating instructions should be retained for future reference  
3. Heed Warnings - All warnings on the TV and in the operating instructions should be adhered to.  
4. Follow Instructions - All operating and use instructions should be followed.  
5. Cleaning - Unplug TV from the wall outlet before cleaning - Do not use liquid cleaners or aerosol  
cleaners. Use a damp cloth for cleaning.  
6. Attachments - Do not use attachments not recommended by the TV manufacturer as they may  
cause hazards.  
7. Water and Moisture - Do not use this TV near water - for example, near a bath tub, wash bowl,  
kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.  
8. Accessories - Do not place this TV on an unstable cart, stand, tripod,  
bracket, or table. The TV may fall, causing serious injury to someone  
FEATURES  
CAUTION  
On-Screen graphics guide you through setup features and operations.  
Automatic programming of channels allows easy selection of stations available in your  
viewing area.  
Place your TV in a room with adequate ventilation.  
Keep yourTV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
Leave enough room for air to circulate around the bottom, top and back of the set.  
Your TV works on normal household current (120 volts, 60 Hz). For safety purpose, your  
TV’s electrical plug has one blade wider than the other. If you cannot insert the plug fully  
into the socket, try reversing it.  
19. Servicing - Do not attempt to service thisTV yourself as opening and removing covers may expose  
you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.  
20. Damage Requiring Service - Unplug this TV from the wall outlet and refer servicing to qualified  
service personnel under the following conditions:  
Sleep timer programs the TV to turn itself off at a preset time.  
One day timer programs the TV to come on once at a preset time.  
Weekly timer programs the TV to come on at a preset time every day.  
25 button infrared remote control allows remote operation.  
VHF/UHF/CATV tuning allows reception of standard broadcasts or cable TV channels.  
Close caption decoder displays captions or half-screen text.  
V-BLOCK function.  
a) When the power-supply cord or plug is damaged.  
b) If liquid has been spilled, or objects have fallen into the TV.  
c) If the TV has been exposed to rain or water.  
d) If the TV does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions as an improper adjustment of other  
controls may result in damage and will often require extensive work by a qualified technician to  
restore the TV to its normal operation.  
and serious damage to the TV. Use only with a cart, stand, tripod,  
bracket, or table recommended by the manufacturer, or sold with the  
TV.  
Any mounting of the TV should follow the manufacturer’s instructions,  
and should use a mounting accessory recommended by the  
manufacturer.  
In the space provided, record the serial and model numbers, located on the rear of the unit.  
SERIAL NO.______________ MODEL NO.______________  
SPECIFICATIONS  
9. The TV and cart combination should be moved with care.  
e) If the TV has been dropped or damaged in any way.  
AC Power Input  
AC Power  
Consumption  
Chassis Construction  
Picture Tube  
(measured diagonally)  
120 V, 60 Hz  
77 Watts  
WARNING:  
Quick stops, excessive force, and uneven surfaces may cause the TV and cart combination to  
overturn.  
f) When the TV exhibits a distinct change in performance - this indicates a need for service.  
21. Replacement Parts - When replacement parts are required, be sure the service technician has  
used replacement parts specified by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.  
22. Safety Check - Upon completion of any service or repairs to this TV, ask the service technician to  
perform safety checks to determine that the TV is in proper operating condition.  
23. Wall or Ceiling Mounting - The TV should be mounted to a wall or ceiling only as recommended  
by the manufacturer.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE  
TO RAIN OR MOISTURE.  
10 Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable  
operation of the TV and to protect it from overheating, and these openings must not be blocked or  
covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other  
similar surface. This TV should not be placed in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.  
11. Power Sources - This TV should be operated only from the type of power source indicated on the  
marking label. If you are not sure of the type of power supply to your home, consult your TV dealer  
or local power company. For TVs intended to operate from battery power, or other sources, refer to  
the operating instructions.  
12. Grounding or Polarization -ThisTV may be equipped with a polarized alternatingcurrent line plug  
(a plug having one blade wider than the other).This plug will fit into the power outlet only one way.  
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.  
If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.Do not defeat  
the safety purpose of the polarized plug.  
IC Solid State  
13”  
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY  
INSERT.  
Speaker  
3.5 × 2 in (90 × 50 mm)  
Oval, 8 ohm  
181 Channel, Freq. Synthesized  
Infrared, Direct Access  
2 × AA batteries  
VHF  
Tuner  
Remote Control  
CAUTION  
24. Heat - The TV should be situated away from heat sources such as radiators, heat registers, stoves,  
or other products (including amplifiers) that produce heat.  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Receiving Channels  
2-13  
14-69  
UHF  
CATV:  
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Note to CATV system installer:  
This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC  
which provides guidelines for proper grounding and, in particular, specifies that the cable ground  
shall be connected to the grounding system of the building, as close to the point of cable entry as  
Mid Band  
Super Band  
Hyper Band  
Ultra Band  
14-22  
23-36  
37-65  
66-94, 100-125  
practical.  
FIGURE 1  
Sub Mid Band  
75 ohm (VHF/UHF)  
Coaxial Input  
1, 95-99  
13. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be  
walked on or pinched by items placed upon or against them, paying particular attention to cords at  
plugs, convenience receptacles, and the point where they exit from the TV.  
14. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the TV, be  
sure the antenna or cable system is grounded so as to provide some protection against voltage  
surges and built-up static charges. Article 810 of the National Electrical Code ANSI/NFPA 70,  
provides information with regard to proper grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes and requirements for the grounding electrode.  
See Figure 1.  
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70  
Antenna Input  
Impedance  
ANTENNA  
LEAD-IN WIRE  
GROUND  
CLAMP  
The lightning flash with the arrowhead symbol within an  
equilateral triangle, is intended to alert the user to the  
presence of uninsulated dangerous voltagewithin the  
products enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to someone.  
The exclamation point within an equilateral triangle is  
intended to alert the user to the presence of important  
operating and maintenance (servicing) instructions in the  
literature accompanying the appliance.  
NEC - NATIONAL  
ELECTRICAL CODE  
S2898A  
ANTENNA DISCHARGE UNIT  
(NEC SECTION 810-20)  
As an ENERGY STAR® Partner, MEMCORP has  
determined that this product meets the ENERGY  
STAR® guidelines for energy efficiency.  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
PRINTED IN MALAYSIA  
1111-4030M178 MP0108-1  
GROUND CLAMPS  
ELECTRIC SERVICE  
EQUIPMENT  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM (NEC ART 250, PART H)  
ANTENNA CONNECTIONS  
OPERATING CONTROLS AND FUNCTIONS  
FRONT PANEL  
REAR PANEL  
1. POWER SWITCH  
For Subscribers to Scrambled Cable Service:  
To allow viewing of all channels through converter/descrambler. TV must be set to the output  
channel of the converter/descrambler (usually ch 3 or 4).  
COMBINATION VHF/UHF ANTENNA  
2. CHANNEL UP/DOWN BUTTON  
3. VOLUME UP/DOWN BUTTON  
4. REMOTE CONTROL SENSOR  
5. VHF/UHF EXT. ANT. JACK  
(REAR OF SET)  
(Single 75 ohm cable or 300 ohm twin-lead wire)  
Connect the 75 ohm cable from combination VHF/UHF antenna to the antenna jack.  
If your combination antenna has a 300 ohm twin-lead wire, use the 300-75 ohm  
matching transformer (not included).  
VOLUME  
DOWN UP  
CHANNEL POWER  
DOWN UP  
REMOTE SENSOR  
To 75 ohm Coaxial  
EXT. ANT.  
UHF/VHF  
INCOMING  
Jack on TV  
COAXIAL CABLE  
75 ohm  
Converter/Descrambler  
To prevent problems it is recommended that you  
use only the specified transformer. (Transformer  
Part No.: 1398-00301)  
4
3
2
1
5
ANT  
OR  
(USA only)  
The remote control unit requires two 1.5 volt “AA” size batteries. The battery compartment is  
located on the back of the unit. To open, press down of the lid and slide toward the bottom of  
the unit. Install the batteries exactly as shown by the diagram in the compartment.  
If one or both of the batteries are reversed, the REMOTE CONTROL will not operate and the  
unit may be damaged.  
Transformer  
(not included)  
For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels:  
You may need to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/  
B switch box from the cable installer or an electronics supply store. With the A/B switch in “B”  
position you can directly tune to any non-scrambled channels using your TV’s tuning system or  
remote control.With the switch in “A” position, you can tune your TV to the output channel of the  
decoder (usually CH 3 or 4) and use the box to tune scrambled channels. Since cable systems  
vary, you may wish to consult your local cable company.  
300 ohm  
REMOTE CONTROL  
CATV CONNECTIONS  
For Subscribers to Basic Cable Service:  
For basic cable service without a converter/descrambler box, connect the CATV 75 ohm coaxial  
cable directly to the antenna jack on the rear of the TV.  
Do not allow strong sunshine to fall on the TV set front panel as this may affect the operation  
of the remote control.  
1. POWER BUTTON - Press to turn the TV on or off.  
12  
11  
2. NUMBER BUTTONS - Press to select a channel. For channels 1-9, press 0, then  
the channel you want to watch.For example, for channel 6, press 0, 6.For channels  
100 -125, press the 100 button, then press the last two digits of the channel you  
want to watch. For example, for channel 116, press 100, 1, 6. Note: Make sure you  
press the second or third digit of a channel within a few seconds of pressing the  
first digit. If you don’t, you’ll have to start over.  
3. MUTE BUTTON - Press once to eliminate sound. Press again to restore sound.  
4. MENU BUTTON - Press to call up the main menu screen. Also, press to enter data  
when going to the next step of an operation.  
5. – AND + BUTTONS - Press to adjust or select functions listed in on-screen displays.  
6. Q. REV. (QUICK REVIEW) BUTTON - Press to return to the previous channel. For  
example, if you were watching channel 2, then use the Number buttons to switch to  
channel 6, pressing the Q. REV button will return the TV to channel 2.  
7. VOLUME (UP/DOWN) BUTTONS - Press to raise or lower the sound.  
8. CHANNEL (UP/DOWN) BUTTONS - Press to scroll up or down through the  
channels.  
9. RECALL BUTTON - Press to display the channel being viewed. Press again to  
display the time. Press again to remove the on-screen display. Note: If the RECALL  
button is pressed when theTV is in closed caption mode, captions or text will not be  
displayed.  
POWER SLEEP  
1
2
To 75 ohm Coaxial  
1
4
2
5
8
0
3
ANT  
Jack on TV  
INCOMING  
EXT. ANT.  
UHF/VHF  
6
9
COAXIAL  
CABLE  
Converter/Descrambler  
7
TV/CAP/TEXT  
CH 1/2  
SPLITTER  
A/B Switch  
A
B
Some cable companies offerpremium paychannels in which the signal is scrambled.Descrambling  
these signals for normal viewing requires the use of a descrambler device which is generally  
provided by the cable company. Below are illustrations for connection of these types of converter/  
descrambler devices with the TVs VHF antenna jack.  
100  
RECALL  
10  
9
CHANNEL  
VOLUME  
8
MUTE  
MENU  
3
7
6
Q. REV.  
4
5
10. CH1/CH2 BUTTON - Switches between channel 1 and channel 2 of the closed  
caption mode.  
11. TV/CAP(tion)/TEXT BUTTON - When you are watching a closed caption program,  
press this button to switch between the standard TV screen, closed captioning and  
half-screen text.  
12. SLEEP BUTTON - Press to start the sleep time or to display the time left in a sleep  
timer.  
TV OPERATIONS SET UP  
TV OPERATIONS SET UP  
Weekly Timer  
1. Repeat steps 1 and 2 of One Day Time.  
SETTING LANGUAGE  
Manual Programming (Add/Delete Channels)  
CLOSED CAPTION MODE  
CH PROGRAM  
PROGRAM TIMER  
MENU TUE 1:35 PM  
CLOCK SET  
PROGRAM TIMER  
AIR / CABLE  
CABLE  
ONE DAY  
WEEKLY  
EXIT  
OFF  
ON  
Close caption mode allows user to read the words of a broadcast on-screen while hearing them.  
V-BLOCK SET  
The menu screen can be programmed to appear in English, French or  
PICTURE ADJUST  
Spanish as procedure below:  
AUTO SEARCH  
CH MEMORY  
EXIT  
1. Press MENU to display main menu.  
CH PROGRAM  
LANGUAGE  
EXIT  
2. Select (+) or (-) until WEEKLY, press MENU and the OFF (or ON) beside  
WEEKLY will flash.  
There are two types of closed captioning:  
2. Select (+) or (-) until CH PROGRAM, press MENU.  
3. Select (+) or (-) until CH MEMORY, press MENU.  
[+] / [-] : SELECT  
[MENU] : AIR/CABLE  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
[+] / [-] : MENU SELECT  
[MENU] : ENTER  
Captions - Dialogue and description of the action appear in a box at the bottom of the screen.  
Text - Words appear on the screen. This is often used for channel guides.  
1. Press MENU to display main menu.  
3. Select (+) or (-) until ON, press MENU to enter the weekly timer screen.  
4. Repeat steps 5 and 6 of One Day Timer.  
WEEKLY TIMER  
4. Select the desired channels to be added or deleted using either the  
2. Select (+) or (-) until LANGUAGE, press MENU to select the desired  
language.  
Often, both modes are accessible in more than one languages. Close caption is available only on  
programs with closed captioning.  
CH PROGRAM  
NUMBER or CHANNEL (8/9) buttons.  
ON TIME  
-- : -- AM  
OFF TIME CH  
-- : -- AM 10  
AIR / CABLE  
AUTO SEARCH  
CH MEMORY  
EXIT  
CABLE  
SUN MON TUE WED THU FRI SAT  
EXIT  
5. Press (+) to add (it will turn white) or (-) to delete (it will turn red) the  
channel.  
5. Press MENU to select the day(s) of the week you do not want the TV to  
come on. Once that day is flashing, use (+) or (-) to disable or enable the  
selection. White indicates TV will come on and red is vice versa.  
1. Press TV/CAP(tion)/Text button until CAPTION or TEXT (whichever  
you want) appears on-screen bottom right corner.  
3. Select (+) or (-) until EXIT, press MENU to exit.  
[MENU] : MOVE  
[+] / [-] : ADJUST  
[+] / [-] : SELECT  
[MENU] : ENTER  
6. Repeat steps 4 and 5 to add or delete other channels.  
7. Press MENU to return to the CH PROGRAM screen.  
8. Press MENU to exit while EXIT is highlighted.  
2. Press CH1/CH2 button to select English (CH1) or foreign languages  
SETTINGTHE CLOCK  
WEEKLY TIMER  
(CH2) caption or text.  
CAPTION  
CH 1  
6. While EXIT is blinking, press (+) or (-) to exit.  
CLOCK SET  
ON TIME  
1 : 00 PM  
OFF TIME CH  
2 : 00 AM 22  
CH MEMORY  
CABLE 10  
1. Press MENU twice until CLOCK SET screen.  
SUN -- : -- AM  
EXIT  
CABLE TV OPERATION  
SUN MON TUE WED THU FRI SAT  
EXIT  
1. Press MENU.  
2. Set the correct day, hour(s), minute(s) and AM/PM for the CLOCK using  
[MENU] : MOVE  
[+] / [-] : ADJUST  
If you don’t program channels, you will still receive channels when you press  
either the CHANNEL (8/9) or Number buttons. But you will also have to scan  
through channel that have no reception or very poor reception when you press  
the CHANNEL (8/9) buttons.  
(+) or (-) and press MENU after each entry to go to the next step.  
[MENU] : MOVE  
[+] / [-] : ADJUST  
[+]  
[-]  
[MENU]  
:
:
:
ADD  
DELETE  
EXIT  
2. Use (+) or (-) until CH PROGRAM, press MENU.  
3. While EXIT is flashing, press (+) or (-) to exit.  
Sleep Timer  
1. Press SLEEP to enter sleep timer screen.  
3. Press MENU until CABLE appears beside AIR/CABLE.  
(In CATV mode, the channel number changes color from yellow to green.)  
CLOCK SET  
SLEEP 60  
TUE 1 : 35 PM  
EXIT  
You may have to reset the clock it there is a power outage or if you unplug the  
TV. To correct day or time, repeat step 1, press MENU repeatedly until the  
desired item is flashing, make correction using (+) or (-). Finally press MENU  
until EXIT flashing and press (+) or (-) to exit.  
On CATV (Cable Television) system, programs are brought into the home on VHF CH 2~13, mid-  
band CH A~I, super band CH J~W, hyper band CH AA~CCC, ultra band CH W+30~W+84 and  
sub mid-band CH 5A, A5~A1.  
2. Press SLEEP repeatedly until the desired sleep time (in steps of 10  
minutes from 00 (OFF mode) up to 90 minutes).  
TIMERS SET UP  
One Day Timer  
PROGRAM TIMER  
[MENU] : MOVE  
[+] / [-] : ADJUST  
To check remaining time, press SLEEP. To cancel sleep timer, set sleep  
time to 00.  
ONE DAY  
WEEKLY  
EXIT  
ON  
OFF  
1. Press MENU to display main menu.  
CH Number  
on TV  
Corresponding  
CATV CH  
CH Number  
on TV  
Corresponding  
CATV CH  
2. Select (+) or (-) until PROGRAM TIMER, press MENU.  
(Clock time must be set before proceeding this step, go to Setting the  
Clock)  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
ADJUSTING THE PICTURE  
1
2
5A  
2
13  
66  
67  
68  
W+30  
W+31  
W+32  
PROGRAMMING CHANNELS  
Automatic Programming  
PICTURE ADJUST  
CH PROGRAM  
1. Press MENU to display main menu.  
ONE DAY TIMER  
3. While ONE DAY is highlighted, press MENU, the OFF (or ON) beside  
ONE DAY will flash.  
ADJUST  
RESET  
EXIT  
AIR / CABLE  
AUTO SEARCH  
CH MEMORY  
EXIT  
CABLE  
2. Select (+) or (-) until PICTURE ADJUST, press MENU.  
3. Press MENU while ADJUST is highlighted.  
ON TIME  
-- : -- AM  
OFF TIME CH  
-- : -- AM 10  
13  
14  
15  
35  
36  
37  
38  
62  
63  
64  
65  
A
94  
95  
96  
97  
98  
99  
100  
101  
102  
W+58  
A5  
1. Press MENU to display main menu.  
4. Select (+) or (-) until ON, press MENU to enter the one day timer screen.  
[+] / [-] : SELECT  
[MENU] : ENTER  
EXIT  
[+] / [-] : SELECT  
[MENU] : AIR/CABLE  
B
V
4. Press MENU to select the feature.(CONTRAST, BRIGHTNESS, COLOR,  
TINT OR SHARPNESS)  
5. Set the hour, minute(s) and AM/PM for both ON TIME and OFF TIME  
using (+) or (-) and press MENU after each entry to go to the next step.  
(The OFF TIMER changes to exactly three hours after the ON TIME).  
[MENU] : MOVE  
[+] / [-] : ADJUST  
A4  
A3  
A2  
A1  
2. Select (+) or (-) until CH Program, press MENU.  
5. Use (+) or (-) to adjust the picture. The bar scale shows the level of  
adjustment.  
3. Press MENU until the mode (AIR or CABLE) that corresponds to your  
TV signal system appears beside AIR/CABLE.  
W
ONE DAY TIMER  
6. Select the desired channel using either Number, CHANNEL 8/9 or (+)  
AA,W+1  
BB,W+2  
ZZ,W+26  
AAA,W+27  
BBB, W+28  
CCC,W+29  
ON TIME  
1 : 00 AM  
OFF TIME CH  
2 : 00 AM 22  
6. Press MENU until PICTURE ADJUST screen appears.  
7. Select (+) or (-) until EXIT, press MENU to exit.  
CH PROGRAM  
or (-) buttons then press MENU.  
W+59  
W+60  
W+61  
4. Select (+) or (-) until AUTOSEARCH, press MENU to start it.  
The TV will automatically cycle through all the TV or CABLE channel  
depending on the mode selected, and store active channel in its memory.  
When complete, the CH PROGRAM screen will re-appear on-screen.  
AIR / CABLE  
AUTO SEARCH  
CH MEMORY  
EXIT  
CABLE  
EXIT  
CONTRAST  
63  
7. While EXIT is blinking, press (+) or (-) to exit.  
[MENU] : MOVE  
[CH 8/9] : ADJUST  
Picture Adjustments  
[+] / [-] : SELECT  
[MENU] : START  
125  
W+84  
FUNCTION  
CONTRAST  
BRIGHT(ness)  
COLOR  
(-) Button  
Weaker  
Darker  
Paler  
(+) Button  
Stronger  
Lighter  
To cancel a timer, follow steps 1 to 3. At step 4, use the (+) or (-) to change the ON to OFF.  
The one day timer has priority when the same time value is set for the ONTIME field of both the one day  
timer and the weekly timer.  
5. Select (+) or (-) until CH Program, press MENU to exit.  
The actual number of channels received depends upon channel reception in your area or your cable  
system. Consult your local Cable TV company to find out which of these channels are receivable and which  
type of Cable system is used in your area.  
Deeper  
You may have to reprogram the timer if there is a power outage or if the TV is unplugged.  
To stop automatic programming while it is in progress, press MENU.  
TINT  
Greenish  
Softer  
Purplish  
Sharper  
SHARPNESS  
To reset the picture settings to the initial state, repeat steps 1 and 2. Select (+) or (-) until RESET, press  
MENU. Then press MENU to exit.  
BEFORE REQUESTING SERVICE  
V-BLOCK SETUP  
V-Block allow users to program their TV to automatically block an incoming program with  
certain level of violence, sexual content and strong language based on age, content or  
both ratings.  
Before requesting service, check the following list of problems and solutions.You may be able to  
solve the problems yourself.  
TV RATING SET UP  
ENGLISH RATING/FRENCH RATING SET UP  
V-BLOCK SET  
MPAA RATING  
TV RATING  
ENGLISH RATING OFF  
FRENCH RATING OFF  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
1. Go to CHANGE RATING sub-menu screen.  
2. Select (+) or (-) until TV RATING, press MENU.  
This setting is use to receive data service for Canadian English/French Language Rating System  
in according with EIA-744-A Standard.  
OFF  
PROBLEM  
No Power  
SOLUTION  
V-BLOCK SET UP  
[+] / [-] : SELECT  
[MENU] : ENTER  
3. Select (+) or (-) until the desired rating appears beside TV RATING,  
press MENU.  
MENU SUN 11:23 AM  
1. Go to CHANGE RATING sub-menu screen.  
V-BLOCK SET  
V-BLOCK SET  
• Make sure the unit is plugged in.  
CLOCK SET  
1. Press MENU to display main menu.  
MPAA RATING  
TV RATING  
ENGLISH RATING OFF  
FRENCH RATING OFF  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
MPAA RATING  
TV RATING  
ENGLISH RATING OFF  
FRENCH RATING OFF  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
PROGRAM TIMER  
V-BLOCK SET  
PICTURE ADJUST  
CH PROGRAM  
LANGUAGES  
EXIT  
• Unplug the unit from electrical outlet for 60 seconds. Then plug it  
in and turn it on again.  
2. Select (+) or (-) until ENGLISH or FRENCH  
RATING, press MENU, the OFF (or ON) beside it  
will flash.  
When user select TV-Y7, TV-PG, TV-14 or TV-MA and press MENU, the sub-ratings (content-based rating)  
will appear beside the selected main rating. User can select either only main rating or combine with the  
sub-ratings as below:  
2. Select (+) or (-) until V-BLOCK SET, press MENU.  
OFF  
OFF  
[+] / [-] : MENU SELECT  
[MENU] : ENTER  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
3. Use the number buttons to input “0000”. (the preset pass number  
is 0000), then press MENU.  
TV-Y7(FV), TV-PG(DLSV), TV-14(DSLV), TV-MA(LSV)  
No Picture  
• Make sure the antenna is properly connected at the back of the  
TV.  
3. Select (+) or (-) until ON, press MENU.  
FV : Fantasy Violence  
V-BLOCK SET  
D : Suggestive Dialogue  
4. Press MENU, the OFF (or ON) beside V-BLOCK will flash.  
5. Select (+) or (-) until ON, press MENU.  
• Make sure the antenna is not broken.  
• Adjust the brightness and contrast controls.  
FRENCH RATING  
ENGLISH RATING  
4. Select (+) or (-) until the desire rating, press MENU,  
the OFF (or ON) beside it will flash.  
PASS NUMBER  
L
S
V
:
:
:
Adult Language  
Sexual Situation  
Violence  
?
?
?
?
G
OFF  
OFF  
OFF  
OFF  
OFF  
C
OFF  
OFF  
OFF  
OFF  
OFF  
OFF  
C8+  
G
PG  
14+  
18+  
EXIT  
8+  
13+  
16+  
18+  
5. Select (+) or (-) until ON, press MENU.  
[+] / [-] : EXIT  
[MENU] : ENTER  
No Sound  
No Color  
• Use the VOLUME (Up/Down) buttons to turn up the volume.  
• Make sure the sound is not muted by pressing the MUTE button.  
EXIT  
6. Select (+) or (-) until EXIT, press MENU to exit.  
4. In case of sub-rating selection:  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
6. Select (+) or (-) until EXIT, press MENU to exit.  
While the sub-rating is flashing, press (+) or (-) repeatedly to add or delete the sub-ratings  
(yellow blank Indicate delete) then press MENU after each entry.  
V-BLOCK SET  
To disable block, set V-BLOCK to OFF.  
• Make sure the show is being transmitted in color by checking to  
see if another channel is in color.  
• Adjust the color control.  
V-BLOCK  
ON  
CHANGE RATING  
CHANGE NUMBER 0000  
EXIT  
If you turn the TV on for the first time, setting V-BLOCK to ON alone will not  
enable the block unless you change the preset state for MPAA and TV Rating  
from OFF to any rating. In case you forget the pass number call your nearest  
Service Centre for assistance.  
5. Select (+) or (-) until EXIT, press MENU to exit.  
LOADING SET UP  
V-BLOCK SET  
V-BLOCK SET  
Rating rotates from lower to higher. TV-MA is the highest rating.  
[+] / [-] : SELECT  
[MENU] : ENTER  
MPAA RATING  
TV RATING  
PG-13  
TV-PG-DLSV  
MPAA RATING  
TV RATING  
PG-13  
TV-PG-DLSV  
OFF  
TV-Y  
TV-Y7  
TV-G  
TV-PG  
TV-14  
TV-MA  
ENGLISH RATING ON  
FRENCH RATING OFF  
ENGLISH RATING OFF  
FRENCH RATING ON  
1. Go to CHANGE RATING sub-menu screen.  
Wrong Color  
• Adjust the color and tint controls.  
LOADING  
EXIT  
OFF  
LOADING  
EXIT  
OFF  
All programs with a higher rating than the one selected will automatically be blocked.  
If you don’t want to block TV RATING, set it OFF.  
When user select only main rating without any sub-rating then program will be blocked only for main  
rating, ignoring the sub-rating. But if user select in combination then programs with higher rating plus  
similar sub-rating than the one selected will automatically be blocked.  
2. Select (+) or (-) until LOADING, press MENU, the  
OFF (or ON) beside it will flash.  
[+] / [-] : SELECT  
[MENU] : ENTER  
[+] / [-] : SELECT  
[MENU] : ENTER  
MPAA RATING SET UP  
Picture Too  
Light/Dark  
• Adjust the brightness and contrast controls.  
V-BLOCK SET  
1. Go to V-BLOCK SET menu screen.  
2. Select (+) or (-) until CHANGE RATING, press MENU.  
V-BLOCK  
CHANGE RATING  
CHANGE NUMBER 0000  
EXIT  
ON  
3. Select (+) or (-) until ON, press MENU.  
4. Press MENU to exit.  
V-BLOCK SET  
V-BLOCK SET  
MPAA RATING  
TV RATING  
ENGLISH RATING ON  
FRENCH RATING OFF  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
MPAA RATING  
TV RATING  
ENGLISH RATING OFF  
FRENCH RATING ON  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
Picture Interference  
• Check the antenna for shorted or broken wires.  
• Reposition the antenna.  
Try another channel to make sure there is no station trouble or  
local interference (such as electric motors). If possible, minimize  
by adjusting the antenna.  
[+] / [-] : SELECT  
[MENU] : ENTER  
V-BLOCK SET  
ON  
ON  
3. While MPAA RATING is highlighted, press MENU, the OFF  
(or any rating) beside MPAA RATING will flash.  
CHANGING A PASS NUMBER  
V-BLOCK  
CHANGE RATING  
CHANGE NUMBER 0000  
EXIT  
ON  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
[+] / [-] : ON/OFF  
[MENU] : ENTER  
V-BLOCK SET  
1. Go to V-BLOCK SET menu screen.  
MPAA RATING  
TV RATING  
ENGLISH RATING OFF  
FRENCH RATING OFF  
LOADING  
EXIT  
PG-13  
TV-PG-DLSV  
4. Select (+) or (-) until the desired rating, press MENU.  
5. Select (+) or (-) until EXIT, press MENU to exit.  
[+] / [-] : SELECT  
[MENU] : ENTER  
2. Select (+) or (-) until CHANGE NUMBER, press MENU, the numbers  
beside it will flash.  
OFF  
Remote Control  
Doesn’t Work  
• Make sure batteries are inserted in the remote control.  
• Make sure the remote control is aimed directly at the remote sensor  
on the TV.  
Set ENGLISH or FRENCH RATING to OFF if you dont want to block.  
Set LOADING to OFF if you dont want to load any ENGLISH or FRENCH RATING.  
For threshold rating system if any rating is set to ON then other higher rating will automatically become  
ON.  
For individual rating system user can select ON or OFF for each level individually.  
With LOADING ON if English or French Rating signal is detected, a PRCC LOADINGmessage in red  
will appear on-screen.  
If there is error in loading, the PRCC LOADINGmessage will change color from red to white and data  
will not load.  
V-BLOCK SET  
[+] / [-] : SELECT  
[MENU] : ENTER  
3. Input the desire numbers using the Number button, press MENU.  
V-BLOCK  
CHANGE RATING  
CHANGE NUMBER 1234  
EXIT  
OFF  
Rating rotates from lower to higher. X is the highest rating.  
4. Press MENU to re-conform your entry then select exit.To make correction  
press (+) or (-) and repeat from step 2.  
OFF  
G
PG  
PG-13  
R
NC-17  
X
Big black box  
on screen  
• Press the TV/CAP/TEXT button until the CAP or TEXT box  
disappears from the screen  
[0] / [9] : NUMBER  
[MENU] : ENTER  
5. Select (+) or (-) until EXIT, press MENU to exit.  
All programs with a higher rating than the one selected will also be blocked.  
If you don’t want to block MPAA RATING, set it to OFF.  
V-BLOCK is activated only on programs and tapes that have the rating signal  
and if activated “V-BLOCK” message together with the rating level appears  
on-screen. The channel blocking will cease if the input source or if the channel  
is changed.  
V-BLOCK SET  
PASS NUMBER  
Data will not load if the channel is change during loading.  
The current English or French Ratings are automatically overwrite as new data are received.  
1
2
3
4
[+] / [-] : NO  
[MENU] :YES  
MT1130C(En)  
1
28/08/2001, 9:45 AM  

JVC AV 20D202 User Manual
JVC LM H191 User Manual
Life is good Computer Monitor W2261VG User Manual
Lindy 70542 User Manual
Marshall electronic V R241 DLW User Manual
Miele Cooktop CS 1326 Y User Manual
National Instruments Computer Hardware PXI 846x Series User Manual
NEC AccuSync Series User Manual
Philips 170X6 User Manual
Philips Computer Monitor 192EL2 User Manual