Maytag MGC4430BD User Manual

30" (76.2 cm) and 36" (91.4 cm) Sealed Gas Cooktop  
PRODUCT MODEL NUMBERS  
MGC4430BD MGC4436BD  
PRODUCT DIMENSIONS – 30" MODEL  
E
Gas supply: The installation of this appliance must  
conform with local codes, or in the absence of local  
codes, with the latest edition of the National Fuel Gas  
Code ANSI Z223.1 USA or current CAN/CGA-B149  
INSTALLATION CODE.  
F
This appliance is designed to operate at a pressure of 5"  
of water column (36" models), 4" of water column (30"  
models) on natural gas or, if converted for use with LP  
gas (propane or butane), 10 " water column. Make sure  
this appliance is supplied with and adjusted for the type  
of gas for which it is designed.  
B
This appliance was adjusted at the factory for use with  
natural gas. If, at any time, this appliance is to be used  
with a different type of gas, all of the conversion  
adjustments described in the installation instructions  
must be made by a qualified service technician before  
attempting to operate the cooktop on that gas. Natural  
gas should be supplied to the appliance pressure  
regulator at a line pressure between 6" – 14" of water  
column or, if converted for LP gas, between 11"– 14".  
A
C
All supply piping, except as noted, should use common  
National Pipe Thread (N.P.T.). For all pipe connections  
use an approved pipe joint compound resistant to the  
action of LP gas.  
The supply line must be equipped with a manual shutoff  
valve. This valve should be located in the same room but  
external to the range. It should be in a location that  
allows ease of opening and closing.  
G
H
Dimensions  
"A"  
"B"  
"C"  
"D"  
"E"  
"F"  
"G"  
"H"  
28-1/2" (72.4 cm)  
19-15/16" (50.6 cm)  
IMPORTANT: Cutout  
dimensions are critical.  
Dimensions must be  
measured and cut  
accurately to within  
1/16" (0.159 cm) to  
ensure proper fit.  
2-1/8"  
5-1/4"  
(5.4 cm)  
(13.3. cm)  
29-1/2" (74.9 cm)  
21" (53.3 cm)  
3-13/16" (9.7 cm)  
12-1/4" (31.1 cm)  
Electrical: See page 2.  
PRODUCT DIMENSIONS – 36" MODEL  
E
D
G
H
F
Dimensions  
"A"  
"B"  
"C"  
"D"  
"E"  
"F"  
"G"  
"H"  
34-1/2" (87.6 cm)  
19-15/16" (50.6 cm)  
IMPORTANT: Cutout  
dimensions are critical.  
Dimensions must be  
measured and cut  
accurately to within  
1/16" (0.159 cm) to  
ensure proper fit.  
B
2-1/8"  
5-1/4"  
36"  
(5.4 cm)  
(13.3. cm)  
(91.4 cm)  
(53.3 cm)  
21"  
3-13/16" (9.7 cm)  
15-1/4" (38.7 cm)  
A
C
Page 1 of 2  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. W10187822  
08-07-08  

ICP DAS USA PCI P16C16 User Manual
Intel Computer Hardware IQ80332 User Manual
John Mills Mighty Pro Grill User Manual
JVC LYT1942 001A User Manual
Lava Computer LAVA 8255 PIO User Manual
NEC PD789488 User Manual
Philips 21PT6334 User Manual
Philips DVP 3020 User Manual
Philips FPF42C128135UA 52 User Manual
Philips Magnavox TR2503C User Manual