Marshall electronic V R84DP HDSDI User Manual

10  
Switch Settings, Adjustments and Indicators  
Marshall Electronics  
1910 East Maple Ave.  
El Segundo, CA 90245  
Tel.: 800-800-6608 • 310-333-0606  
Fax: 310-333-0688  
Power
Illuminate
Image Adjustment Controls  
Note: Tint only functions when NTSC Video or S-Video are selected  
pow
Illum
when
Screen aspect ratio switch 4:3 or 16:9 selector and indicators  
Pixel to Pixel On/Off  
Lights when active  
Blue Gun On/Off  
Lights when active  
4:3 Aspect  
16:9 Aspect  
11  
Pixel to Pixel Function (Under scan)  
As the native LCD display is 800 pixels wide by 600 pixels high, it is necessary to change the size of the image to fill the whole screen.  
Pixel to Pixel mode bypasses the enlargement or scaling function and displays the native incoming format.  
For 525-NTSC based images, pixel to pixel will appear as a 480x640 (4:3 aspect) or 480x720 (16:9 aspect) display.  
For 625-PAL based images, pixel to pixel will appear as a 576x640 (4:3 aspect) or 576x720 (16:9 aspect) display.  
V-R84DP-HDSDI Users Guide  
12  
Menu Functions  
Turn On/Off with Menu button.  
Use Up (P-P), Dn (Blue), and Select (Ratio) for menu navigation functions.  
Color Temperature – Select D65 or User. User mode will automatically be turned on if Gain or Bias are adjusted.  
Adj Color Gain – Select to adjust RGB gains.  
Adj Color Bias – Select to adjust RGB bias  
OSD Toggle OSD on/off.  
Version Number – Display only  
Gain Adjustment  
Press Up (P-P), Dn (Blue), to navigate.  
Press Select (Ratio) to activate.  
Press Select to toggle R, G, or B  
Press Up, Dn, to change value.  
Press Menu to exit  
Chart legend: Left Line  
= Increase of gain  
Center Line = D65 (Default)  
Right Line = Decrease of gain  
Product Overview  
Features  
1
2
3
Bias Adjustment  
Chart legend: Right Line = Increase of Bias  
Center Line = D65 (Default)  
Press Up (P-P), Dn (Blue), to navigate.  
Press Select (Ratio) to activate.  
Press Select to toggle R, G, or B  
Press Up, Dn, to change value.  
Press Menu to exit  
Left Line = Decrease of Bias  
Standard Accessories  
Optional Accessories  
Electrical Specifications  
Mechanical Specifications  
Faceplate Cleaning  
4
5
6
OSD Adjustment  
Press Up (P-P), Dn (Blue), to navigate.  
Press Select (Ratio) to toggle OSD On/Off  
7
8
9
10  
11  
12  
13  
13  
Warranty  
Operational Setup  
Marshall Electronics warranties to the first consumer, that this V-R84DP-HDSDI portable monitor will, under normal use, be free from  
defects in workmanship and materials, when received in its original container, for a period of one year from the purchase date.  
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of pur-  
chase provided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor  
and parts may be charged to you.  
Input Connectors  
Switch Settings, Adjustments and Indicators  
Pixel to Pixel Function  
Menu Functions  
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifica-  
tions in design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any war-  
ranties other than those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time  
period described above.  
Warranty  
Due to constant effort to improve products and product features, specifications may change without notice.  
Optional Accessories (continued)  
Uses 2 Sony DVCam/HDV FP-Type batteries.  
When used with monitor power supply, can charge batteries  
plus operate monitor  
V-DV-PWR1  
Battery Adapter  
Use to power Marshall Electronics monitors that have V-  
Mount plate with Anton Bauer Gold Mount battery.  
V-ABA-01  
V-mount to Anton Bauer adapter  
2-channel sequential charger with a built-in 60W power sup-  
ply. Charges 2 ENDURA E series batteries in fewer than 5  
hours. One 10’ XLR cable included. Weighs only 2 lbs  
IDX-VL-2Plus  
Sequential 2 channel charger  
Economically charges 4 ENDURA E series batteries in  
under 6 hours using Full Power Charge (FPC) method  
IDX-VL-4  
Sequential 4 channel charger  
IDX-VL-4S  
Charges 4 ENDURA E series batteries in 2.5 hours or less  
V-Mount battery pack with 3 LED power Indicator  
Simultaneous 4 channel charger  
55 W Lithium Battery  
IDX-E7S  
IDX-E7  
55 W Lithium Battery  
with Power Link  
V-Mount Battery Pack with PowerLink includes accurate  
Power Status Display and supports Digi-View  
82 W Lithium Battery  
IDX-E10S  
V-Mount battery pack with 3 LED power Indicator  
82 W Lithium Battery  
with Power Link  
V-Mount Battery Pack with PowerLink includes accurate  
Power Status Display and supports Digi-View  
IDX-E10  
Digital to Analog Converter  
Mounting Plate  
BC-0301-10  
Converts SDI to analog Composite  
Attaches to any side for mount to ¼-20 threaded component  
Package of 10 non-toxic, antistatic, alcohol and ammonia  
free cleaning wipes.  
Cleaning Wipes  
V-HWP-K  
Marshall Electronics  
3
5 Electrical Specications  
Display (Viewing Area)  
8.4 Inch diagonal (170.4mm w x 127.8mm h)  
4:3/16:9 switchable  
Screen Aspect  
Resolution (RGB Dots)  
Viewing Angles  
800H×RGB×600V (1.44 million pixels)  
160° with protective screen and treatment (130°H x 120°V native)  
500:1  
Contrast Ratio  
Dot Pitch  
.213mm square pixel  
Pixel Response  
Backlight Type / Life  
Brightness  
10ms rise/25ms fall  
Field Replaceable CCFL (50,000 hour half life)  
500 cd/m²  
LCD Screen Treatments  
Protective Screen  
Anti Reflection, Anti Glare, Hardcoat  
0.118” (3mm) thick Optical Grade Polycarbonate with Anti-Glare and Anti-Abrasion  
coatings. (600 Cheesecloth mil-M-13508C)  
Estimated MTBF  
System  
5 years of 24/7/365 operation  
NTSC/PAL auto recognition  
Inputs  
2 SDI (BNC) Self Terminating (SMPTE-259M) (ITU-BT-R601)  
1 SDI of on screen video (BNC) Available when power is applied  
D65 (6500° Kelvin)  
Active Outputs  
Color temperature  
Color Gamut  
SMPTE-C/EBU  
Luma Linearity  
Power Required  
Power Consumption  
Operating Temperature  
Storage Temperature  
Compliance  
Typical +/- 3% with 5 ire increments (0 to 10 ire)  
10.4 to 16.8 VDC  
Approx. 15 watt nominal  
32°F to 120°F (0°c to 50°c)  
-4°F to 120°F (-20°c to 50°c)  
, FCC-Class A, ANSI-63.4 (Certificates on file)  
Do not dispose. Return to Manufacturer or Authorized Recycle Facility  
RoHS WEEE/Environmental  
6 Mechanical Specications  
Dimensions  
9”w x 6.875” h x 2.5” d (228.6mm x 174.6mm x 38.1mm)  
Approx. Weight  
Power Supply Weight  
3.3 lbs (1.5 Kg)  
1.0 Lb (.45 Kg)  
All signal types and frame rates are automatically detected  
• 525 –60i / 625 - 50i (Interlaced NTSC/PAL)  
Digital Screen Formats and Frame Rates:  
• 720 x 1280 – 23.97P, 24P, 25P, 50P, 59.94P, 60P (Progressive)  
• 1035 x 1920 - 59.94i, 60i (Interlaced)  
• 1080 x 1920 – 50i, 59.94i, 60i / 23.973Psf, 24Psf, 25Psf, 29.97Psf, 30Psf  
Psf=Progressive or Segmented Frame formats  
7 Faceplate Cleaning  
Faceplate Cleaning  
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean micro ber  
cloth. Do not use paper towels. Paper towel bers are coarse and may scratch the surface of the Polycarbonate faceplate. Paper  
towels may also leave streaks on the surface. Antistatic and ngerprint resistant cleaning agents are recommended.  
Wash protective cover with a solution of mild soap or detergent and lukewarm water. Use a clean soft cloth, applying only light pres-  
sure. Rinse with clean water and dry by blotting with a damp cloth or chamois. Grease, oil or tar may be removed with a good grade  
of hexane, aliphatic naphtha, or kerosene. These solvents may be obtained at a paint or hardware store and should be used in ac-  
cordance with manufacturer’s recommendations.  
DO NOT USE: window cleaning sprays, kitchen scouring compounds or solvents such as acetone, gasoline, benzene,  
alcohol, carbon tetrachloride, or lacquer thinner. These can scratch the sheet’s surface and/or weaken the sheet causing  
small surface cracks called “crazing.”  
Faceplate Dusting  
Dust with a soft, damp cloth or chamois. Dry or gritty cloths may cause surface scratches and create a static electric charge on the  
surface. Neutralizing static electricity effects by using recommended cleaning and polishing practice.  
Faceplate Polishing  
Protect and maintain surface gloss by occasional polishing with a good plastic cleaner and polish. Apply a thin, even coat with a soft  
clean cloth and polish lightly with cotton annel. Then wipe with a damp cloth to help eliminate electrostatic charges that can attract  
dust particles  
Marking on the Faceplate  
Use SHARPEE or equivalent marker. Clean as per instructions with an ammonia free cleaning agent.  
V-R84DP-HDSDI Users Guide  
4

JVC IF C51HSDG User Manual
KitchenAid KECC507RSS00 User Manual
KitchenAid KGCC506RBB00 User Manual
Lenovo ThinkCentre 6137 User Manual
LG Electronics M4201C User Manual
Memorex MT2272 User Manual
Mitsubishi Electronics MDT321S User Manual
Philips 21PT6346 User Manual
Philips 25ST1731 User Manual
Philips MatchLine 30PW9818 User Manual