Marshall electronic V R151PV R151P User Manual

Marshall Electronics  
Broadcast Multimedia Division  
15” Rackmountable  
LCD PANEL with  
Audio  
Marshall Electronics  
V-R151P  
El Segundo, California  
www.LCDRacks.com  
INSTALLATION cont.  
5. Menu Tree  
1) TV  
MONITOR  
TV ON AIR  
2) PC Monitor  
CABLE TV  
Page 4  
Page 9  
1. Installation  
3) VIDEO  
1) Before Installation  
nBefore using your monitor, make sure to read this manual carefully. In case of any problems  
with installation, contact Marshall Electronics.  
nThe monitor should be handled with caution and not be exposed to impact or shock.  
nThe display area is highly prone to scratches. Use cleaner suggested by the authorized  
service center.  
nDo not expose the monitor in high temperature or in high humidity.  
nThere are no user serviceable parts inside your monitor. To avoid risk of electric shock, do not  
open your monitor case!  
2) Components  
Rackmountable TFT LCD Monitor- 1 pc  
DC Power Supply Adapter -1 pc  
Power Cable 1- pc  
4) OSD ( On Screen Display) control  
Computer Cable 1 pc  
3) Operation  
Multiple Input Terminal  
Press Menu Select (System Setting) Select OSD U/D) or OSD L/R)  
use the UP, DOWN keys  
4) Tally  
The V-R151P comes with a tally light installed at the top right-hand corner of the unit. The light  
is operated by inserting a 2.5mm plug into the jack marked ‘TALLY’ on the rear of the unit. The  
light will come on by closing the two contacts together. DO NOT GIVE POWER TO THIS  
PLUG IT IS SELF-POWERED.  
5) System Control Menu Tree  
PC  
0
0
TV  
COMPOSITE S-VHS  
5) Mounting  
HORIZONTAL PAN  
VERTICAL PAN  
VALUE DEFAULT  
CHANNEL ADD / REMOVE  
TV=AIR CH  
The V-R151P is designed to fit in a  
EIA standard 19” rack. It requires 6  
rack units of vertical space and is  
secured with eight screws. It may be  
necessary to center the unit up or  
down so that it does not touch any  
adjacent units when the unit is tilted  
up or down.  
0
0
0
0
0
0
0
0
MODE  
INPUT CONDITION  
VOLUME ADJUSTMENT  
BRIGHTNESS  
CONTRAST  
HUE  
COLOR  
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Page 3  
Page 10  
3. Computer  
2. TV Mode  
1) Computer Mode Selection  
1) TV Mode Selection  
Press  
Press  
(INPUT) using the UP, DOWN keys press  
(INPUT) Using UP, DOWN keys  
(SYSTEM SETTING)  
(TV)  
(MONITOR) and than press select.  
2) Value Default  
Press  
2). Horizontal Pan / Vertical Pan Control  
(VALUE  
Press  
(HORIZONTAL PAN ) or (VERTICAL PAN) control  
DEFAULT System control values will be initialized as this monitor is  
originally manufactured.  
(HORIZONTAL PAN) or (VERTICAL PAN) by pressing the UP, DOWN keys.  
3) Value Default  
Press  
3) Channel ADD / Remove  
(SYSTEM SETTING) press  
(VALUE  
Press  
(CHANNEL ADD/ REM) when you select a  
DEFAULT) press  
monitor is manufactured.)  
(System control values will be initialized as this  
channel which has already been added, (ADD/REMOVE) will turn into  
(REMOVE) to remove the channel from your favorite channel list. To  
add the channel,  
(ADD) and press  
.
4) Color Change  
Press  
(COLOR CHANGE)  
one of 4 modes to set  
4) Air/ Cable TV  
Press  
(AIR) or (CABLE)  
you can control selected sub-menu with the UP, DOWN keys press  
sub-menu (4 color mode) will appear repeat the above steps  
until you have settled color change press  
you will be asked whether (SAVE YES) or (SAVE NO)  
two options.  
(SYSTEM SETTING)  
(TV)  
when you press menu,  
one of the  
5)Volume Adjust  
Press  
(VOLUME ADJUST) Use UP, DOWN keys  
Color Change sub-menu will be limited to Brightness/Contrast only.  
(If you press menu before selecting (SAVE YES), color will become invalid.)  
press  
(If you press  
before pressing  
, volume  
adjust will become invalid.)  
5) Input Condition Control  
6) Color Change  
Press  
to set you can control  
Press  
(SYSTEM SETTING)  
(INPUT  
(COLOR CHANGE)  
one of 4 modes  
CONDITION)  
one of the five modes to set.  
sub-menu with UP, DOWN keys  
Control the selected sub-menu with Select key  
After tuning is settled, use key to escape from menu tree  
press  
sub-menu (4 color mode) will appear repeat the  
above steps until you have settled color change press  
when you press  
(SAVE NO)  
, you will be asked whether (SAVE YES) or to  
one of the two options.  
(If you press menu before selecting (SAVE YES,) color change will  
become invalid.)  
Page 6  
Page 7  
INSTALLATION cont.  
4. Composite Video / S-VHS  
POWER SUPPLY  
1) Composite Video / S-VHS Selection  
By Remote Control  
Press  
or  
on remote control directly.  
By Menu key  
Press  
(INPUT) using the UP, DOWN keys press  
(COMPOSITE) or  
(S-VHS) and than press  
2) Value Default  
Press  
(MODE) press  
(NTSC) or (PAL) depends on manu-  
factured country Video Mode will not work on (TV) and (Monitor)  
CAMCORDER / Composite Video / DVD  
3) Volume Adjust  
Press  
(VOLUME ADJUST) use the UP, DOWN keys press  
(If you press menu before pressing select, volume adjust will become invalid, )  
4) Color Change  
Press  
(COLOR CHANGE)  
one of 4 modes to set you can control  
sub-menu (4 color mode will  
selected sub-menu with the UP, DOWN keys press  
appear repeat the above steps until you have settled color change press  
when  
you press  
, you will be asked whether (SAVE YES) or (SAVE NO)  
one of the  
two options.  
(If you press menu before selecting (SAVE, YES) color change will become invalid.)  
S-VHS  
Page 8  
Page 5  

IBM 6346 User Manual
LG Electronics LG Life Good Computer Monitor W2242SM User Manual
Lindy 70541 User Manual 1
MTX Audio THUNDER 311B User Manual
Oki 70042401 User Manual
Panasonic Cordless Telephone KX TG6513 User Manual
Panasonic TC 14L10A User Manual
Philips 25GR5760 User Manual
Philips 28PT5155 User Manual
Philips 190S7FS User Manual