Marshall electronic MLYNX15 User Manual

Back Panel  
Marshall Lynx LCD Monitor  
M-Lynx-10W  
User Manual  
Marshall  
Industrial Video/Security Div.  
For more information, contact Marshall Electronics, Industrial Video & Security (800) 800-6608  
Lynx LCD Monitor User Manual  
Lynx LCD Monitor User Manual  
INTRODUCTION  
CONNECTION  
V1  
R
1
2
3
4
hank you for purchasing the Marshall Lynx 10W LCD Monitor. The Lynx Se-  
T
ries of Universal Monitors offers high performance features and excellent pic-  
ture quality for use in a variety of industrial/commercial and mobile applications.  
L
The information contained in this instruction manual covers the installation and  
operation of the monitors. We encourage you to read it carefully and keep it for  
future reference. All the installation materials and wire/cables must pass qual-  
ity inspections in accordance with international electrical rules and laws. When  
installing your monitor, remember to always adhere to local ordinances and laws  
concerning wire and cable installation.  
5
INSTALLATION  
DC12V  
We strongly recommend that a qualified installation and maintenance technician  
install this product. Improper installation of this monitor may cause battery leak-  
age or a short circuit.  
1. Yellow 1 Video input 1  
2. Red Audio Right input  
3. White Audio Left input  
4. Yellow 2 Video input 2 (BNC)  
5. DC12V  
PRECAUTIONS  
Remote Control  
In mobile applications, do not place the remote control in direct sunlight, especial-  
ly in the summer. For example, avoid placing the remote on the dashboard, steer-  
ing wheel or any other place where high temperatures could cause damage. When  
parking in the sun, be sure the remote is safely stored in a glove box or tool kit.  
LCD PANEL FUNCTIONS  
When exposed to direct sunlight, signals emitted from the remote control may  
not be properly received by the monitor. The remote should be pointed within  
close proximity of the front panel receiver.  
Double-sided Tape  
The included double-sided tape is intended for use on a flat desktop surface  
only. Do not attempt to affix the panel on other surfaces.  
LCD  
1
2
3
4
5
Do not press against the screen of the LCD. Pressing against the screen can  
cause distortion or other damage. The images may become unclear or the LCD  
may be damaged.  
1. AV1/AV2/VGA  
4. Decrease brightness, contrast, color, volume, etc.  
5. Increase brightness, contrast, color, volume, etc.  
2. Menu (Up/Down/Left/Right)  
3. Power: ON/OFF  
Do not use this product in temperatures lower than -10ºC or higher than 60ºC.  
4
5
Lynx LCD Monitor User Manual  
Lynx LCD Monitor User Manual  
REMOTE CONTROL OPERATIONS  
Battery Installation  
LCD REMOTE  
Press down the card bolt and pull out the battery card  
Place battery in card with anode (+) side upward  
Place battery card back in original place  
1
VIDEO  
SELECT  
1. Power  
2
3
4
2. AV1/AV2/VGA  
MENU  
5
6
3. Function Decrease  
4. Reset  
MODE  
SELECT  
5. Function Increase  
6. Menu (Up/Down/Left/Right)  
Back of remote controller  
Battery Slot  
Battery  
Card bolt  
M-Lynx-10W Specifications  
Type:  
TFT LCD Digital Panel  
10-inch  
BATTERY REPLACEMENT  
Screen size:  
Under normal operating conditions, the battery will have a 1-year life (shorter,  
depending on the conditions). Low battery power can result in a narrower working  
range, so always make sure your remote has fresh batteries.  
Definition:  
1024 (h) x RGB x 600 (v)  
Computer Resolution:  
System:  
800 x 600 or 1024 x 768 (60Hz)  
Lithium Batteries  
NTSC/PAL  
Always keep the battery out of the reach of children. Clean the batteries with a dry  
cloth to ensure best performance. When installing the batteries, make sure that  
the polarity is correct. Do not use a metal clamp to remove or clip the battery as a  
short circuit could result.  
Nominal Voltage:  
Power Consumption:  
Control:  
12V  
5W MAX  
Front panel button/Remote control  
Note: The battery can explode if improperly handled. Do not throw battery in trash  
or fire. Always recycle battery properly.  
Operating Environment: -10ºC - +60ºC  
Dimensions:  
9.7” x 6.5” x .75”  
7
6

Intel Box Motherboard Matx Xeon S1155 DBS1200V3RPS User Manual
JVC AV 32H4SU User Manual
Logitech Wireless Wave Combo MK550 User Manual
Magnavox CRT Television 50MF412B User Manual
MSi 865GM3 User Manual
NEC EA221WM User Manual
NEC PV46 User Manual
Panasonic GT01 User Manual
Philips DVP5160 User Manual
Philips SBCSC368 User Manual