Lenovo LT2013P User Manual

LT2013p Wide Flat Panel Monitor  
User’s Guide  
Contents  
Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii  
Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1  
Shipping contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1  
Height Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4  
Monitor Pivot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4  
Monitor controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5  
Setting up your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
Connecting and turning on your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6  
Chapter 2. Adjusting and using your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-1  
Using the On-Screen Display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4  
Image rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9  
Understanding power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10  
Chapter 3. Reference information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-1  
Installing the monitor driver in Windows 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7  
Appendix A. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1  
Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1  
Contents  
1
Safety information  
General Safety guidelines  
For tips to help you use your computer safely, go to:  
Before installing this product, read the Safety Information.  
í
í
í
iii  
   
Chapter 1. Getting started  
This User’s Guide provides detailed operation instructions for the user. For quick instruction  
overview, please see the Setup Poster for brief information.  
Shipping contents  
The product package should include the following items:  
Setup Poster  
Reference and Driver CD  
Flat Panel Monitor  
Power Cord  
USB 2.0 Cable  
Analog Cable(for VGA use)  
Chapter 1.  
1-1  
 
Notice for use  
To set up your monitor, please see the illustrations below.  
Note: Do not touch the monitor within the screen area. The screen area is glass and can be  
damaged by rough handling or excessive pressure.  
1. Place your monitor with the screen face down on a soft flat surface.  
2. Align the stand assembly bracket to the monitor.  
3. Insert the bracket towards monitor until it locks in place.  
Chapter 1.  
1-2  
 
Product overview  
This section will provide information on adjusting monitor positions, setting user controls, and  
using the cable lock slot.  
Types of adjustments  
Tilt  
Please see the illustration below for an example of the tilt range.  
0°  
Swivel  
With the built-in pedestal, you can tilt and swivel the monitor for the most comfortable  
viewing angle.  
R
ꢁꢂR  
ꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃꢃ  
ꢀꢁꢂ  
Chapter 1.  
1-3  
       
Height Adjustment  
For height adjustment, user needs to press down or lift up the monitor.  
ꢄꢄꢅPP  
Monitor Pivot  
- Adjust the screen position before rotating the monitor screen. (Make sure that the monitor  
screen ascent to its highest point, and it inclines backward at 30°.)  
- then rotate clockwise until the monitor stops at 90°.  
Chapter 1.  
1-4  
Monitor controls  
The keypad controls on the panel frame are accesses to various functions.  
Cable lock slot  
Your monitor is equipped with a cable lock slot located on the rear of your monitor.  
Chapter 1.  
1-5  
 
Setting up your monitor  
This section provides information on how to set up your monitor.  
Connecting and turning on your monitor  
Note: Be sure to read the Safety information on page iii before carrying out this procedure.  
1. Power off your computer and all attached devices, then unplug the computer power cord.  
2. Connect the cables according to below icon indication.  
3. Connect one end of the DP cable to the DP connector on the back of the computer, and the  
other end to the DP connector on the monitor. Lenovo recommends that customers who  
require to use the Display Port input on their monitor purchase the "Lenovo Display Port  
to Display Port cable 0A36537".  
Chapter 1.  
1-6  
 
4. Connect one end of the HDMI cable to the monitor HDMI port and the other end to the  
computer if it has HDMI output terminal.  
5. Connect one end of the analog signal cable to the monitor VGA (Analog) connector and  
the other end to the computer.  
Chapter 1.  
1-7  
6. Connect the speaker’s audio cable and audio jack of monitor to transfer audio source from  
Display Port, or HDMI.  
Note: The audio output in HDMI/DP modes.  
7. Connect one end of the USB cable to the USB upstream terminal on the back of the  
monitor, and connect the other end of the USB cable to an appropriate USB port on your  
computer.  
Note: The USB port will stay in function as long as the monitor is connected to power,  
regardless of whether the monitor is switched on or off.  
Chapter 1.  
1-8  
8. Connect one end of the USB cable to the USB upstream terminal on the side of the  
monitor, and connect the other end of the USB cable to an appropriate USB port on your  
device.  
9. Isnsert the power cord into the monitor, then plug the monitor power cord and the  
computer cord into grounded electrical outlets.  
Note: A certified power supply cord has to be used with this equipment. The relevant  
national installation and or equipment regulations shall be considered. A certified power  
supply cord not lighter than ordinary polyvinyl chloride flexible cord according to  
IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G 0.75mm2 ) shall be  
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245  
(designation H05RR-F 3G 0.75mm2 ) shall be used.  
Chapter 1.  
1-9  
10. Assembled Line Cleaner as shown below.  
11. Power on the monitor and the computer.  
Chapter 1.  
1-10  
12. To initiate the monitor driver, insert the Reference and Driver CD, click Install driver, and  
follow the on-screen instructions.  
Registering your option  
Thank you for purchasing this Lenovo™ product. Please take a few moments to  
register your Product and provide us with information that will help Lenovo to better  
serve you in the future. Your feedback is valuable to us in developing product and  
services that are important to you, as well as in developing better ways to  
communicate with you. Register your option on the following Web site:  
Lenovo will send you information and updates on your registered product unless you  
indicate on the Web site questionnaire that you do not want to receive further  
information.  
Chapter 1.  
1-11  
 
Chapter 2. Adjusting and using your monitor  
This section will give you information on adjusting and using your monitor.  
Comfort and accessibility  
Good ergonomic practice is important to get the most from your personal computer and to  
avoid discomfort. Arrange your workplace and the equipment you use to suit your individual  
needs and the kind of work that you perform. In addition, use healthy work habits to maximize  
your performance and comfort while using your computer. For more detailed information on  
any of these topics, visit the Healthy Computing Web site at:  
Arranging your work area  
Use a work surface of appropriate height and available working area to allow you to work in  
comfort.  
Organize your work area to match the way you use materials and equipment. Keep your work  
area clean and clear for the materials that you typically use and place the items that you use  
most frequently, such as the computer mouse or telephone, within the easiest reach.  
Equipment layout and setup play a large role in your working posture. The following topics  
describe how to optimize equipment setup to achieve and maintain good working posture.  
Positioning your monitor  
Position and adjust your computer monitor for comfortable viewing by considering the  
following items:  
Viewing distance: Optimal viewing distances for monitors range from approximately  
510 mm to 760 mm (20 in to 30 in) and can vary depending on ambient light and time of  
day. You can achieve different viewing distances by repositioning your monitor or by  
modifying your posture or chair position. Use a viewing distance that is most comfortable  
for you.  
Monitor height: Position the monitor so your head and neck are in a comfortable and  
neutral (vertical, or upright) position. If your monitor does not have height adjustments,  
you might have to place books or other sturdy objects under the base of the monitor to  
achieve the desired height. A general guideline is to position the monitor such that the top  
of the screen is at or slightly below your eye-height when you are comfortably seated.  
However, be sure to optimize your monitor height so the line of site between your eyes  
and the center the monitor suits your preferences for visual distance and comfortable  
viewing when your eye muscles are in a relaxed state.  
Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and  
to accommodate your preferred head and neck posture.  
General location: Position your monitor to avoid glare or reflections on the screen from  
overhead lighting or nearby windows.  
Chapter 2.  
2-1  
       
The following are some other tips for comfortable viewing of your monitor:  
Use adequate lighting for the type of work you are performing.  
Use the monitor brightness, contrast controls, if equipped to optimize the image on your  
screen to meet your visual preferences.  
Keep your monitor screen clean so you can focus on the screen’s contents.  
Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to  
periodically look away from your monitor screen and focus on a far object to allow your eye  
muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision  
care specialist for advice.  
Quick tips for healthy work habits  
The following information is a summary of some important factors to consider to help you  
remain comfortable and productive while you use your computer.  
Good posture starts with equipment setup: The layout of your work area and the setup  
of your computer equipment have a large effect on your posture while using your  
computer. Be sure to optimize the position and orientation of your equipment by following  
comfortable and productive posture. Also, be sure to use the adjustment capabilities of  
your computer components and office furniture to best suit your preferences now and as  
your preferences change over time.  
Minor changes in posture can help avoid discomfort: The longer you sit and work with  
your computer, the more important it is to observe your working posture. Avoid assuming  
any one posture for an extended period of time. Periodically make minor modifications in  
your posture to help deter any discomforts that might arise. Make use of any adjustments  
that your office furniture or equipment provide to accommodate changes in posture.  
Short, periodic breaks help ensure healthy computing: Because computing is primarily  
a static activity, it is particularly important to take short breaks from your work.  
Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise  
take a short break from using your computer. A short break from work gives your body a  
welcome change in posture and helps to ensure you remain comfortable and productive  
while you do work.  
Accessibility information  
Lenovo is committed to providing greater access to information and technology to  
people with disabilities. With assistive technologies, users can access information in  
the way most appropriate to their disability. Some of these technologies are already  
provided in your operating system; others can be purchased through vendors or  
accessed at:  
Chapter 2.  
2-2  
   
Adjusting your monitor image  
This section describes the control features to adjust your monitor image.  
Using the direct access controls  
The direct access controls can be used when the On-Screen Display (OSD) is not displayed.  
Icon  
Control  
Input Source  
Description  
Switches the video input source  
Shift back to previous level when in OSD mode  
1
2
Press and hold for 10 seconds to enable or disable the  
DDC-CI function  
DDC-CI  
Exit  
Exit and return to previous level  
Optimizes image (size, position, phase and clock) (For  
analog [VGA] source only)  
Auto Adjustment  
Left browsing key  
Decrease/Down  
Brightness  
For decreasing the value on adjustment bar/tune in  
Press to move to previous item  
Direct access to Brightness adjustment  
Right browsing key  
3
Increase/Up  
For increasing the value on adjustment bar/tune in  
Press to move to next item  
To access OSD menu  
Press to confirm selection  
Menu  
Enter  
Press and hold for 10 seconds will lock menu/un-lock  
menu  
4
Press to enter next level on main menu/sub menu status  
or enter previous level on adjustment bar  
Chapter 2.  
2-3  
     
Using the On-Screen Display (OSD) controls  
To adjust the settings, the user controls can be viewed through the OSD.  
Brightness / Contrast / DCR  
Cancel  
OK  
To use the controls:  
1. Press  
2. Use  
to open the main OSD menu.  
or  
to move among the icons. Select an icon and press  
to access the selected  
or , then  
to make adjustments then press to save.  
function. If there is a sub-menu, you can move between options using  
press  
to select that function. Use  
or  
3. Press  
to move backwards through the sub-menus and exit from the OSD.  
4. Press and hold  
for 10 seconds to lock the OSD. This will prevent accidental  
adjustments to the OSD. Press and hold  
adjustments to the OSD.  
for 10 seconds to unlock the OSD and allow  
5. Enables DDC/CI by default. Use OSD Exit Key, press and hold  
for 10 seconds to  
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.  
Chapter 2.  
2-4  
Table 2-1. OSD functions  
OSD Icon on Main  
Controls and  
Adjustments  
Submenu  
Description  
Menu  
Adjusts overall screen  
brightness.  
All input ports  
Brightness  
Contrast  
Brightness/  
Contrast/DCR  
Adjusts difference between light  
and dark areas.  
Enable dynamic contrast ratio.  
Moves image left or right.  
Moves image up or down.  
DCR  
Analog(VGA) only  
Horizontal Position  
Vertical Position  
Automatic  
Image Position  
Image Setup  
Optimizes image (size, position,  
phase and clock).  
Manually optimizes image. See  
Manual  
Clock  
Phase  
Save  
Chapter 2.  
2-5  
Table 2-1. OSD functions  
OSD Icon on Main  
Controls and  
Adjustments  
Submenu  
Description  
Menu  
Adjusts intensity of red, green,  
and blue.  
All input ports  
Color  
Image Properties  
Preset mode  
Neutral  
sRGB  
Reddish  
Bluish  
Custom  
Red: Increases or decreases  
the saturation of Red in the  
image.  
Green: Increases or  
decreases the saturation of  
Green in the image.  
Blue: Increases or decreases  
the saturation of Blue in the  
image.  
Save: Saves the custom  
color choices.  
This monitor can accept video  
signals through three different  
connectors. Most desktop  
computers use a analog  
All input ports  
Input Signal  
connector. Select digital among  
OSD Controls when you use DP  
/ HDMI connector.  
- Select 1- Analog (VGA)  
- Select 2-HDMI (digital)  
- Select 3-DP (digital)  
Selects type of scaled image.  
Off(1:1)  
Scaling  
Same Aspect Ratio with input  
signal.  
On(Expand)  
Expand image to full screen.  
Shows resolution, refresh rate,  
and product details.  
All input ports  
Information  
Note: This screen offers  
information only, and (does) not  
allow for setting changes.  
Options  
Chapter 2.  
2-6  
Table 2-1. OSD functions  
OSD Icon on Main  
Controls and  
Adjustments  
Submenu  
Description  
Menu  
Changes languages of menu.  
All input ports  
Note: The selected language  
only affects the language of the  
OSD. It has no effect on any  
software running on the  
computer.  
Menu Language  
Options  
Adjusts menu location.  
Default  
Menu Position  
The menu position to the default  
settings.  
Custom  
Horizontal: Changes the  
horizontal position of the  
OSD.  
Vertical: Changes the  
vertical position of the  
OSD.  
Save: Save the custom  
position choices.  
Reset all settings to the default  
settings.  
Factory default  
Accessibility  
Cancel  
Reset  
Changes button repeat rate and  
menu time-out settings.  
Button repeat rate  
Off  
Default  
Slow  
Menu time out  
Set the duration of time that the  
OSD will remain active when no  
operation is performed(  
).  
Exit from menu.  
Exit  
Chapter 2.  
2-7  
Selecting a supported display mode  
The display mode of the monitor uses is controlled by the computer. Therefore, refer to your  
computer documentation on how to change display modes.  
The image size, position and shape might be changed when the display mode changes. This is  
normal and the image can be re-adjusted using automatic image setup and the image controls.  
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel  
technology is inherently flicker-free.  
Note: If your system has previously been used with a CRT monitor and is currently configured  
to a display mode outside the range of this monitor, you may need to reattach the CRT monitor  
temporarily until you have re-configured the system; preferably to 1600 x 900 at 60 Hz, which  
is a common display mode.  
The display modes shown below have been optimized at the factory.  
Table 2-2. Factory set display modes  
Timing  
Refresh rate(Hz)  
PAL  
50 Hz  
70 Hz  
60 Hz  
72 Hz  
75 Hz  
70 Hz  
56 Hz  
60 Hz  
72 Hz  
75 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
75 Hz  
60 Hz  
70 Hz  
75 Hz  
60 Hz  
60 Hz  
60 Hz  
75 Hz  
60 Hz  
60 Hz  
50 Hz  
50 Hz  
640x350  
640x480  
640x480  
640x480  
720x400  
800x600  
800x600  
800x600  
800x600  
832x624  
1024x768  
1024x768  
1024x768  
1152x864  
1280x1024  
1280x1024  
1280x1024  
1366x768  
1440x900  
1600x900  
1600x900  
480p(640x480)  
480p(720x480)  
576p(720x576)  
720p(1280x720)  
Chapter 2.  
2-8  
   
Table 2-2. Factory set display modes  
Timing  
Refresh rate(Hz)  
720p(1280x720)  
60 Hz  
Image rotation  
Before rotating the monitor, you should set-up your computer to rotate the image.  
Rotating the image may require special rotation software or you may find that your  
computer is preloaded with video graphic drivers that allows image rotation. Check  
the Graphic Properties setting on your computer to see if this feature is available.  
Try these steps to check if image rotation is available on your computer.  
1. Right-click on the desktop and click Properties.  
2. Select the Settings tab and click Advanced.  
3. If you have ATI, select the Rotation tab and set the preferred rotation. If you have  
nVidia, click the nVidia tab, in the left-hand column select NV Rotate, and then  
select the preferred rotation. If you have Intel, select the Intel graphics tab, click  
Graphic Properties, select the Rotation tab, and then set the preferred rotation.  
Check with the manufacturer of your computer to see if graphic drivers with image  
rotation can be downloaded from their support website.  
Chapter 2.  
2-9  
Understanding power management  
Power management is invoked when the computer recognizes that you have not used your  
mouse or keyboard for a user-definable period. There are several states as described in the  
table below.  
For optimal performance, switch off your monitor at the end of each working day, or whenever  
you expect to leave it unused for long periods during the day.  
Table 2-3. Power indicator  
Restoring  
Operation  
State  
Power Indicator  
Screen  
Compliance  
On  
Standby/Suspend  
Green  
Normal  
Blank  
Amber  
Press a key or  
ENERGY STAR  
move the mouse  
There may be a  
slight delay before  
the image  
reappears.  
Note: Standby  
also occurs if there  
is no image output  
to the monitor.  
Off  
Off  
Blank  
Press the power  
button  
ENERGY STAR  
There may be a  
slight delay before  
the image  
reappears.  
Chapter 2.  
2-10  
 
Caring for your monitor  
Be sure to turn off the power before you perform any maintenance on the monitor.  
Do not:  
Apply water or liquid directly to your monitor.  
Use solvents or abrasives.  
Use flammable cleaning materials to clean your monitor or any other electrical equipment.  
Touch the screen area of your monitor with sharp or abrasive items. This type of contact  
may cause permanent damage to your screen.  
Use any cleaner which contains an anti-static solution or similar additives. This may harm  
the coating of the screen area.  
Do:  
Lightly dampen a soft cloth with water and use this to gently wipe the covers and the  
screen.  
Remove grease or finger marks with a damp cloth and a little mild detergent.  
Detaching the monitor base and stand  
Step 1: Place the monitor on a soft and flat surface.  
Step 2: Remove the screws from base before detaching base and stand from the monitor.  
Wall Mounting (Optional)  
Refer to the instructions that come with the base mounting kit. To convert your LCD display  
from a desk-mounted to a wall-mounted display, do the following:  
Step 1: Verify that the Power button is turned Off, then disconnect the power cord.  
Step 2: Lay the LCD display face down on a towel or blanket.  
Chapter 2.  
2-11  
       
Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit  
(100mm x100mm distance), the type of VESA mounting screw is M4 x 10 mm.  
VESA hole  
Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting  
kit.  
For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg  
Chapter 2.  
2-12  
Chapter 3. Reference information  
This section contains monitor specifications, instructions to manually install the monitor  
driver, troubleshooting information, and service information.  
Monitor specifications  
Table 3-1. Monitor specifications for type-model 60A0-MAR1-WW  
Dimensions  
Depth  
221.6 mm (8.72 in.)  
336.5 mm (13.25 in.)  
Height  
Width  
467 mm (18.39 in.)  
Stand  
Tilt  
Range: -5° ~ 30°  
VESA mount  
Image  
Supported  
Viewable image size  
100 mm x 100 mm (3.94 in. x 3.94 in.)  
494.03 mm (19.45 in.)  
Maximum height  
Maximum width  
239.76 mm (9.44 in.)  
432.0 mm (17.0 in.)  
Pixel pitch  
0.27 mm (0.01 in.)  
Power input  
Supply voltage  
90-264 V AC (100-240 V AC +/-10%)  
Max supply current  
1.5 A  
-
Power consumption  
Normal operation  
Standby/Suspend  
Off  
<17W  
Note: Power consumption  
figures are for the monitor and  
the power supply combined  
<1W (Analog), <1W (Digital)  
<0.5W at 100VAC and 240VAC  
Note: without USB/  
Webcam/external  
speaker  
Video input (Analog)  
Interface  
VGA  
Input signal  
Analog Direct Drive, 75 ohm 0.7V  
Horizontal  
addressability  
1600 pixels (max)  
--  
Vertical addressability  
Clock frequency  
900 lines (max)  
205 MHz  
Chapter 3.  
3-1  
   
Table 3-1. Monitor specifications for type-model 60A0-MAR1-WW  
Video input DP (Digital)  
Interface  
DP  
Input signal  
VESA TMDS (Panel Link™)/DP  
Horizontal  
addressability  
1600 pixels (max)  
--  
Vertical addressability  
900 lines (max)  
Clock frequency  
Interface  
205 MHz  
HDMI  
Video input HDMI (Digital)  
Input signal  
VESA TMDS (Panel Link™)/HDMI  
Horizontal  
addressability  
1600 pixels (max)  
--  
Vertical addressability  
900 lines (max)  
225 MHz  
Clock frequency  
VESA DDC/CI  
Communications  
Supported display modes  
Horizontal frequency  
30 KHz - 83 KHz  
Vertical frequency  
Native Resolution  
Operating  
50 Hz - 75 Hz  
1600 x 900 at 60 Hz  
0° to 45° C (32° to 113° F)  
Temperature  
Humidity  
Storage  
-20° to 60° C (-4° to 140° F)  
Shipping  
-20° to 60° C (-4° to 140° F)  
10% to 80% non-condensing  
Operating  
Storage  
5% to 95% non-condensing  
5% to 95% non-condensing  
Shipping  
Chapter 3.  
3-2  
Troubleshooting  
If you have a problem setting up or using your monitor, you might be able to solve it yourself.  
Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your  
problem.  
Table 3-2. Troubleshooting  
Problem  
Possible cause  
Suggested action  
Reference  
The words "Out of The system is set to a  
Range" are shown display mode which is  
on the screen, and not supported by the  
If you are replacing an old  
monitor, reconnect it and  
adjust the display mode to  
within the specified range  
for your new monitor.  
"Selecting a supported  
display mode"on page  
the power  
monitor.  
indicator is  
flashing green.  
If using a Windows system,  
restart the system in safe  
mode, then select a  
supported display mode for  
your computer.  
If these options do not work,  
contact the Support Center.  
The image quality The video signal cable  
Be sure the signal cable is  
firmly plugged into the  
system and monitor.  
"Connecting and  
turning on your  
is unacceptable.  
is not connected with  
the monitor or system  
completely.  
The color settings may  
be incorrect.  
Select another color setting "Adjusting your  
from the OSD menu.  
monitor image"on page  
The automatic image  
setup function was not  
performed.  
Perform automatic image  
setup.  
"Adjusting your  
monitor image"on page  
The power  
The monitor’s  
power switch is not  
switched on.  
Be sure the power cord "Connecting and  
indicator is not lit  
and there is no  
image.  
is connected properly.  
turning on your  
Be sure the outlet has  
power.  
The power cord is  
loose or  
disconnected.  
Power on the monitor.  
Try using another  
power cord.  
There is no power  
at the outlet.  
Try using another  
electrical outlet.  
Screen is blank  
and power  
indicator is  
amber.  
The monitor is in  
Standby/Suspend mode.  
Press any key on the  
keyboard or move the  
mouse to restore  
operation.  
"Understanding power  
management"on page  
Check the Power  
Options settings on  
your computer.  
Chapter 3.  
3-3  
 
Table 3-2. Troubleshooting  
Problem  
The power  
Possible cause  
The video signal cable  
Suggested action  
Reference  
Be sure the video cable is  
"Connecting and  
indicator is amber, is loose or disconnected connected with the system  
but there is no  
image.  
from the system or  
monitor.  
properly.  
The monitor brightness Adjust the brightness and  
"Adjusting your  
and contrast are at the  
lowest setting.  
contrast setting on the OSD monitor image"on page  
menu.  
One or more of the This is a characteristic  
If there are more than five  
Appendix A."Service  
pixels appear  
discolored.  
of the LCD technology pixels missing, contact the  
and is not an LCD  
defect.  
Support Center.  
Fuzzy lines in  
text or a  
blurry image.  
Image setup has not Adjust the resolution  
"Adjusting your  
been optimized.  
settings on your system to  
match the native resolution 2-3  
for this monitor: 1600 x 900  
at 60 Hz.  
Your system  
Horizontal or  
vertical lines  
through the  
image.  
Display Properties  
setting have not  
been optimized.  
Perform automatic image  
setup. If automatic image  
"Selecting a supported  
setup does not help, perform 2-8  
manual image setup.  
When working in the native See the Advanced  
resolution, you may find  
section of your  
additional improvements by system’s display  
adjusting the Dots Per Inch properties.  
(DPI) setting on your  
system.  
Manual image setup  
If automatic image setup does not establish the image that you prefer, perform manual image  
setup.(For analog [VGA] only)  
Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.  
1. Press  
2. Use  
to open the OSD menu.  
to select and press to access.  
and press to access.  
or to select Clock or Phase adjustment.  
or  
3. Use or to select  
4. Use  
Clock: (pixel frequency) adjusts the number of pixels scanned by one horizontal  
sweep. If the frequency is not correct, the screen shows vertical stripes and the picture  
does not have the correct width.  
Phase: adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the  
picture has horizontal disturbances in light picture.  
5. When the image no longer looks distorted, select Save to save the adjustments of Clock  
and Phase.  
6. Press  
to leave the OSD menu.  
Chapter 3.  
3-4  
   
Manually installing the monitor driver  
Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft  
Windows Vista, Microsoft Windows 8.  
Installing the monitor driver in Windows 7  
To use the Plug and Play feature in Microsoft Windows 7, do the following:  
Note: You must download file from the Reference and Driver CD to use the Plug and Play  
feature in Windows 7.  
1. Turn off the computer, all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the  
Windows 7 operating system.  
4. Open the Display Properties window by clicking Start, Control Panel, Hardware and  
Sound icon, and then clicking the Display icon.  
5. Click the Change the display settings tab.  
6. Click the Advanced Settings icon.  
7. Click the Monitor tab.  
8. Click the Properties button.  
9. Click the Driver tab.  
10. Click Update Driver, then click Browse the computer to find the driver program.  
11. Select Pick from the list of device driver program on the computer.  
12. Click the Have Disk button. Click the Browse button and navigate to the following  
directory:  
X:\Monitor Drivers  
(where X is the drive letter designator for the CD-ROM drive).  
13. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.  
14. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your  
hard disk drive.  
15. Close all open windows and remove the CD.  
16. Restart the system. The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.  
Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a  
refresh rate of 60 Hz.  
Chapter 3.  
3-5  
   
Installing the monitor driver in Windows Vista  
To use the Plug and Play feature in Microsoft Windows Vista, do the following:  
Note: You must download file from the Reference and Driver CD to use the Plug and Play  
feature in Windows Vista.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows  
Vista operating system.  
4. Click Start, Control Panel and then click the Hardware and Sound icon.  
5. Click the Personalization icon.  
6. Click the Display Settings icon.  
7. Click the Advanced Settings button.  
8. Click the Monitor tab.  
9. Click the Properties button.  
10. Click the Driver tab.  
11. Click Update Driver, then click Browse the computer to find the driver program.  
12. Select Pick from the list of device driver program on the computer.  
13. Click the Have Disk button. Click the Browse button and navigate to the following  
directory: X:\Monitor Drivers  
(where X is the drive letter designator for the CD-ROM drive).  
14. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.  
15. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your  
hard disk drive.  
16. Close all open windows and remove the CD.  
17. Restart the system. The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.  
Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at a  
refresh rate of 60 Hz.  
Chapter 3.  
3-6  
 
Installing the monitor driver in Windows 8  
To use the Plug and Play feature in Microsoft Windows 8, do the following:  
Note: You must download file from the Reference and Driver CD to use the Plug and Play  
feature in Windows 8.  
1. Turn off the computer, all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows  
8 operating system.  
4. Open the Display Properties window by clicking Start, right-click, choose All  
Application, enter Control Panel and Hardware and Sound icon. and then clicking the  
Display icon.  
5. Click the Change the display settings tab.  
6. Click the Advanced Settings icon.  
7. Click the Monitor tab.  
8. Click the Properties button.  
9. Click the Driver tab.  
10. Click Update Driver, then click Browse the computer to find the driver program.  
11. Select Pick from the list of device driver program on the computer.  
12. Click the Have Disk button. Click the Browse button and navigate to the following  
directory:  
X:\Monitor Drivers\Windows 8  
(where X is the drive letter designator for the CD-ROM drive).  
13. Select the "lenlt2013pwa.inf" file and click the Open button. Click the OK button.  
14. Select LEN LT2013pwA and click Next. The files will be copied from the CD to your  
hard disk drive.  
15. Close all open windows and remove the CD.  
16. Restart the system. The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
Note: Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display  
quality. Lenovo recommends using either 1600 x 900 at a refresh rate of 60 Hz, or 640 x 480 at  
a refresh rate of 60 Hz.  
Getting further help  
If you still can’t solve your problem, please contact the Lenovo Support Center. For more  
Chapter 3.  
3-7  
 
Service information  
Customer responsibilities  
The warranty does not apply to a product which has been damaged due to accident, misuse,  
abuse, improper installation, usage not in accordance with product specifications and  
instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.  
The following are examples of misuse or abuse and not covered by warranty:  
Images burned onto the screen of a CRT monitor. Burned image is preventable by utilizing  
a moving screen saver or power management.  
Physical damage to covers, bezel, base and cables.  
Scratches or punctures on monitor screens.  
Service parts  
The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to supprot  
the customer warranty. Parts are for service use only. The table below shows information for  
model 60A0-MAR1-WW.  
Table 3-3. List of service parts  
FRU (FIELD  
Machine  
Type/Model(MTM)  
REPLACEABLE UNIT)  
PART NUMBER  
DESCRIPTION  
COLOR  
03X7999  
03X8000  
03T8438  
03T8439  
LT2013p Wide -  
Monitor (HDMI)  
60A0  
Raven Black  
Raven Black  
Raven Black  
Raven Black  
LT2013p Wide-Analog 60A0  
cable (1.8m, RoHS)  
LT2013pWide-USB2.0 60A0  
cable (1.8m, RoHS)  
LT2013p Wide-FRU  
Stand and Base  
60A0  
Chapter 3.  
3-8  
       
Appendix A. Service and Support  
The following information describes the technical support that is available for your product,  
during the warranty period or throughout the life of your product. Refer to the Lenovo Limited  
Warranty for a full explanation of Lenovo warranty terms.  
Registering your option  
Register to receive product service and support updates, as well as free and discounted  
Online technical support  
Online technical support is available during the lifetime of a product at:  
Product replacement assistance or exchange of defective components also is available during  
the warranty period. In addition, if your option is installed in a Lenovo computer, you might be  
entitled to service at your location. A Lenovo technical support representative can help you  
determine the best alternative.  
Telephone technical support  
Installation and configuration support through the Customer Support Center will be available  
until 90 days after the option has been withdrawn from marketing. After that time, the support  
is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also  
available for a nominal fee.  
Before contacting a Lenovo technical support representative, please have the following  
information available: option name and number, proof of purchase, computer manufacturer,  
model, serial number and manual, the exact wording of any error message, description of the  
problem, and the hardware and software configuration information for your system.  
Your technical support representative might want to walk you through the problem while you  
are at your computer during the call.  
Telephone numbers are subject to change without notice. The most up-to-date telephone list  
Country or Region  
Telephone Number  
Africa  
Africa: +44 (0)1475-555-055  
South Africa: +27-11-3028888 and 0800110756  
Central Africa: Contact the nearest Lenovo  
Business Partner  
Argentina  
Australia  
Austria  
0800-666-0011 (Spanish)  
131-426 (English)  
Warranty service and support: 01-211-454-610 (German)  
Warranty service and support: 02-225-3611 (Dutch, French)  
0800-10-0189 (Spanish)  
Belgium  
Bolivia  
Appendix A.  
A-1  
         
Country or Region  
Telephone Number  
Brazil  
Sao Paulo region: (11) 3889-8986  
Outside Sao Paulo region: 0800-701-4815  
(Brazilian Portuguese)  
Brunei  
801-1041 (English, Bahasa Melayu)  
Canada  
Toronto: 416-383-3344  
Outside Toronto: 1-800-565-3344  
(English, French)  
Chile  
Toll Free: 188-800-442-488  
800-361-213  
(Spanish)  
China  
86-10-58851110  
800-990-8888  
(Mandarin)  
China  
(Hong Kong S.A.R.)  
ThinkCentre® Commercial PC: 8205-0333  
Multimedia Home PC: 800-938-228  
(Cantonese, English, Mandarin)  
China  
(Macau S.A.R.)  
ThinkCentre Commercial PC: 795-9892  
Multimedia Home PC: 0800-336  
(Cantonese, English, Mandarin)  
Colombia  
Costa Rica  
Croatia  
1-800-912-3021 (Spanish)  
0-800-011-1029 (Spanish)  
0800-0426  
Cyprus  
+357-22-841100  
Czech Republic  
Denmark  
+420-2-7213-1316  
Warranty service and support: 7010-5150 (Danish)  
1-866-434-2080 (Spanish)  
1-800-426911 (Spanish)  
+202-35362525  
Dominican Republic  
Ecuador  
Egypt  
El Salvador  
Estonia  
800-6264 (Spanish)  
+372 6776793  
+372 66 00 800  
Finland  
France  
Warranty service and support: +358-800-1-4260 (Finnish)  
Warranty service and support (hardware): 0810-631-213  
Warranty service and support (software): 0810-631-020  
(French)  
Germany  
Greece  
Warrantyserviceandsupport:01805 004618 (German)  
+30-210-680-1700  
Guatemala  
Honduras  
1800-624-0051 (Spanish)  
Tegucigalpa: 232-4222  
San Pedro Sula: 552-2234  
(Spanish)  
Hungary  
+36-1-382-5716  
+36-1-382-5720  
(English, Hungarian)  
Appendix A.  
A-2  
Country or Region  
Telephone Number  
India  
1800-425-2666  
+91-80-2535-9182  
(English)  
Indonesia  
021 5238 823  
Local number only: 001-803-606-282  
DID (Direct Inward Dialing): +603 8315 6859  
(English, Bahasa Indonesia)  
Ireland  
Israel  
Warranty service and support: 01-881-1444 (English)  
Givat Shmuel Service Center: +972-3-531-3900  
(Hebrew, English)  
Italy  
Warranty service and support: +39-800-820094 (Italian)  
Japan  
Toll Free: 0120-20-5550  
International: +81-46-266-4716  
The above numbers will be answered with a Japanese language voice  
prompt. For telephone support in English, please wait for the Japanese  
voice prompt to end, and an operator will answer. Please say "English  
support please," and your call will be transferred to an English-speaking  
operator.  
PC software: 0120-558-695  
Overseas calls: +81-44-200-8666  
(Japanese)  
Korea  
1588-6782 (Korean)  
+371 7070360  
Latvia  
Lithuania  
Luxembourg  
Malaysia  
+370 5 278 66 00  
+352-360-385-343 (French)  
Local number only: 1800-88-1889  
DID: +603 8315 6855  
(English, Bahasa Melayu)  
Malta  
+35621445566  
Mexico  
001-866-434-2080 (Spanish)  
+44 (0)1475-555-055  
Middle East  
Netherlands  
New Zealand  
Nicaragua  
Norway  
+31-20-514-5770 (Dutch)  
0800-733-222 (English)  
001-800-220-1830 (Spanish)  
Warranty service and support: 8152-1550 (Norwegian)  
Panama  
Lenovo Customer Support Center: 001-866-434-2080 (Toll Free)  
206-6047 (Spanish)  
Peru  
0-800-50-866 (Spanish)  
Philippines  
Poland  
1800-1601-0033 (English, Filipino)  
+48-22-878-6999 (Polski)  
+351-21-892-7046 (Portuguese)  
+4-021-224-4015  
Portugal  
Romania  
Appendix A.  
A-3  
Country or Region  
Telephone Number  
Russia  
Moscow: +7-(495)-258-6300  
Toll Free: +8-800-200-6300  
(Russian)  
Singapore  
Local number only: 800-6011-343  
DID: +603 8315 6859 (English)  
Slovakia  
Slovenia  
Spain  
+421-2-4954-5555  
+386-1-200-50-60 (Slovenian)  
91-714-7983  
0901-100-000  
(Spanish)  
Sri Lanka  
+9411 2493547  
+9411 2493548  
(English)  
Sweden  
Warranty service and support: 077-117-1040 (Swedish)  
Switzerland  
Warranty service and support: 0800-55-54-54  
(German, French, Italian)  
Taiwan  
886-2-8723-9799  
0800-000-700  
(Mandarin)  
Thailand  
Local number only: 1-800-060-066  
66 2273 4088  
DID: +603 8315 6857 (Thai, English)  
Turkey  
0212 336 0366 , 00800 448 825 165 (Turkish)  
Standard warranty support: 08705-500-900 (English)  
1-800-426-7378 (English)  
United Kingdom  
United States  
Uruguay  
000-411-005-6649 (Spanish)  
Venezuela  
Vietnam  
0-800-100-2011 (Spanish)  
For Northern Area and Hanoi City:  
844 3 946 2000 or 844 3 942 6457  
For Southern Area and Ho Chi Minh City:  
848 3 829 5160 or 844 3 942 6457  
(Vietnamese, English)  
Appendix A.  
A-4  
Appendix B. Notices  
Lenovo may not offer the products, services, or features discussed in this document in all  
countries. Consult your local Lenovo representative for information on the products and  
services currently available in your area. Any reference to a Lenovo product, program, or  
service is not intended to state or imply that only that Lenovo product, program, or service  
may be used. Any functionally equivalent product, program, or service that does not infringe  
any Lenovo intellectual property right may be used instead.  
However, it is the user 's responsibility to evaluate and verify the operation of any other  
product, program, or service.  
Lenovo may have patents or pending patent applications covering subject matter described in  
this document. The furnishing of this document does not give you any license to these patents.  
You can send license inquiries, in writing, to:  
Lenovo (United States), Inc.  
1009 Think Place - Building One  
Morrisville, NC 27560  
U.S.A.  
Attention: Lenovo Director of Licensing  
LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE  
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of  
express or implied warranties in certain transactions, therefore, this statement may not apply  
to you.  
This information could include technical inaccuracies or typographical errors. Changes are  
periodically made to the information herein; these changes will be incorporated in new editions  
of the publication. Lenovo may make improvements and/or changes in the product(s) and/or  
the program(s) described in this publication at any time without notice.  
The products described in this document are not intended for use in implantation or other life  
support applications where malfunction may result in injury or death to persons. The  
information contained in this document does not affect or change Lenovo product  
specifications or warranties. Nothing in this document shall operate as an express or implied  
license or indemnity under the intellectual property rights of Lenovo or third parties. All  
information contained in this document was obtained in specific environments and is presented  
as an illustration. The result obtained in other operating environments may vary.  
Lenovo may use or distribute any of the information you supply in any way it believes  
appropriate without incurring any obligation to you.  
Any references in this publication to non-Lenovo Web sites are provided for convenience only  
and do not in any manner serve as an endorsement of those Web sites. The materials at those  
Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at  
your own risk.  
Any performance data contained herein was determined in a controlled environment.  
Therefore, the result obtained in other operating environments may vary significantly. Some  
measurements may have been made on development-level systems and there is no guarantee  
that these measurements will be the same on generally available systems. Furthermore, some  
measurements may have been estimated through extrapolation. Actual results may vary. Users  
of this document should verify the applicable data for their specific environment.  
Appendix B.  
B-1  
 
Recycling information  
Lenovo encourages owners of information technology (IT) equipment to responsibly recycle  
their equipment when it is no longer needed. Lenovo offers a variety of programs and services  
to assist equipment owners in recycling their IT products. For information on recycling  
Lenovo products, go to:  
Collecting and recycling a disused Lenovo computer or monitor  
If you are a company employee and need to dispose of a Lenovo computer or monitor that is  
the property of the company, you must do so in accordance with the Law for Promotion of  
Effective Utilization of Resources. Computers and monitors are categorized as industrial waste  
and should be properly disposed of by an industrial waste disposal contractor certified by a  
local government. In accordance with the Law for Promotion of Effective Utilization of  
Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the  
collecting, reuse, and recycling of disused computers and monitors. For details, visit the  
Promotion of Effective Utilization of Resources, the collecting and recycling of home-used  
computers and monitors by the manufacturer was begun on October 1, 2003. This service is  
provided free of charge for home-used computers sold after October 1, 2003. For details, visit  
Disposing of Lenovo computer components  
Some Lenovo computer products sold in Japan may have components that contain heavy  
metals or other environmental sensitive substances. To properly dispose of disused  
components, such as a printed circuit board or drive, use the methods described above for  
collecting and recycling a disused computer or monitor.  
Trademarks  
The following terms are trademarks of Lenovo in the United States, other countries, or both:  
Lenovo  
The Lenovo logo  
ThinkCenter  
ThinkPad  
ThinkVision  
Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.  
Other company, product, or service names may be trademarks or service marks of others.  
Appendix B.  
B-2  
   

Jabra FREEWAY Bluetooth speakerphone HFS100 User Manual
Kingston Technology MCMASTER MC133PD User Manual
KitchenAid KFGS366VSS01 User Manual
Lenovo X301 User Manual
LG Electronics LG Life Good Computer Monitor L1733TR User Manual
Philips 28PW9615 User Manual
Philips 109S4x User Manual
Philips 170C6 User Manual
Philips 191E2 User Manual
Philips DVD Player DVP3320 User Manual