LG Electronics SUPER MULTI FORMAT RECORDING DR787T User Manual

DR298H-M_HA1ULLB

DVD RECORDER

OWNER’S MANUAL

MODEL: DR787T

Before connecting, operating or adjusting this product,

please read this owner’s manual carefully and completely.

Call us and we will

guide you through

your first recording,

for free.

1-800-243-0000

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S

MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This product has been designed and manufactured to assure personal safety. Improper use can result in elec-

tric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the follow-

ing procedures for installation, use, and servicing.

This product does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and

operating instructions should be read before the

product is operated.

10. Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

2. Keep these instructions. - The safety, operating

and use instructions should be retained for future

reference.

11. Only use attachments/accessories specified

by the manufacturer.

3. Heed all warnings. - All warnings on the product

and in the operating instructions should be

adhered to.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this apparatus near water. - For

example: near a bath tub, wash bowl, kitchen sink,

laundry tub, in a wet basement; or near a swim-

ming pool; and other areas located near water.

6. Clean only with dry cloth. - Unplug this product

from the wall outlet before cleaning. Do not use

liquid cleaners.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer's instructions.

13. Unplug this apparatus during lightning

storms or when unused for long periods of

time.

Slots and openings in the cabinet are provided

for ventilation and to ensure reliable operation of

the product and to protect it from over-heating.

The openings should never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a

built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manu-

facturer’s instructions have been adhered to.

14. Refer all servicing to qualified service person-

nel. Servicing is required when the apparatus

has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other appa-

ratus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polar-

ized or grounding-type plug. A polarized plug

has two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong. The wide blade or the third

prong are provided for your safety. If the pro-

vided plug does not fit into your outlet, consult

an electrician for replacement of the obsolete

outlet.

INTRODUCTION

RECORDING

About DVD recording . . . . . . . . . . . . . . . . . .36

Notes for recording . . . . . . . . . . . . . . . . . . . .36

Basic Recording from a TV . . . . . . . . . . . . . .37

Instant Timer Recording . . . . . . . . . . . . . . . .37

Timer Recording . . . . . . . . . . . . . . . . . . . . . .38

AV1 Timer Recording using Set-Top

Channel option . . . . . . . . . . . . . . . . . . . . . . .39

Timer Recording Troubleshooting . . . . . . . .40

Playing while you are recording . . . . . . . . . .40

Recording from External Components . . . . .41

Recording from DV Input . . . . . . . . . . . . . . .42

About the

Symbol Display . . . . . . . . . . . . .5

Symbol Used in this Manual . . . . . . . . . . . . . .5

Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5

Moisture Condensation . . . . . . . . . . . . . . . . . .5

Recordable and Playable Discs . . . . . . . . . . .6

Recommended recordable DVD discs . . . . . .6

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .7

Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .7

Restrictions on video recording . . . . . . . . . . .8

What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . .8

Notice for Progressive Scan Use . . . . . . . . . .8

Using an USB Flash Drive . . . . . . . . . . . . . . . .9

About the Remote Control . . . . . . . . . . . . . . .9

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . .10

Remote Control . . . . . . . . . . . . . . . . . . . . . . .11

Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .12

EDITING

Title List and Chapter List Menu Overview .43

VR Mode: Original and Playlist Editing . . . .44

Adding Chapter Markers . . . . . . . . . . . . . . . .44

Changing the Title Thumbnails . . . . . . . . . .44

Making a New Playlist . . . . . . . . . . . . . . . . . .45

Adding Additional Title/Chapters to the

HOOKUP AND SETTINGS

Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Deleting an Original or Playlist Title/

Connecting an Antenna or Cable TV . . . . . .13

Connections to your TV . . . . . . . . . . . . . .14-15

Connection to an Amplifier . . . . . . . . . . . . . .16

Accessory Audio/Video (A/V)

Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . .46

Naming a Title . . . . . . . . . . . . . . . . . . . . . . . .47

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .47

Moving a Playlist Chapter . . . . . . . . . . . . . . .48

Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . .48

Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .48

Divide One Titles Into Two . . . . . . . . . . . . . .49

Combining Two Chapters Into One . . . . . . . .49

Overwriting Recording . . . . . . . . . . . . . . . . .50

Viewing Title List menu displayed on other

DVD Recorders or Players . . . . . . . . . . . . . .50

Playing Your Recordings on Other DVD

Connections to Recorder . . . . . . . . . . . . . . .17

Connecting a Digital Camcorder . . . . . . . . . .17

Connecting the IR control cable . . . . . . . . . .18

Initial Setup Wizard . . . . . . . . . . . . . . . . . . . .19

Using the Home Menu . . . . . . . . . . . . . . . . . .20

Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .20

General Settings . . . . . . . . . . . . . . . . . . . . . .21

Language Settings . . . . . . . . . . . . . . . . . . . .22

Audio Settings . . . . . . . . . . . . . . . . . . . . . . . .23

Lock (Parental Control) Settings . . . . . . .23-24

Recording Settings . . . . . . . . . . . . . . . . . .24-25

Disc Settings . . . . . . . . . . . . . . . . . . . . . . . . .26

Players (Finalizing a Disc) . . . . . . . . . . . . . . .50

REFERENCE

TV VIEWING

Controlling Your TV with the Supplied

Channel Selection . . . . . . . . . . . . . . . . . . . . .27

Channel Selection with Channel List menu .27

General Explanation of On-Screen Display .28

Displaying Information While Watching TV . .28

Displaying Disc Information on-screen . . . . .28

Multi-brand Remote Control . . . . . . . . . . . . .51

Language Code List . . . . . . . . . . . . . . . . . . .52

Area Codes List . . . . . . . . . . . . . . . . . . . . . . .52

Troubleshooting . . . . . . . . . . . . . . . . . . . .53-55

Reset the Recorder . . . . . . . . . . . . . . . . . . .55

Specifications . . . . . . . . . . . . . . . . . . . . . .56-57

Warranty . . . . . . . . . . . . . . . . . . . . .Rear Cover

PLAYBACK

General Playback Features . . . . . . . . . . .29-30

Special Playback Options . . . . . . . . . . . .31-32

Playing an Audio CD or MP3/WMA files . . . .33

Viewing a JPEG files . . . . . . . . . . . . . . . .34-35

Introduction

To ensure proper use of this product, please read

this owner’s manual carefully and retain for future

reference.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the

disc by the edges so that fingerprints do not get on

the surface. Never stick paper or tape on the disc.

About the Symbol Display

“

” may appear on your TV display during operation

and indicates that the function is not permitted by this

unit or specific media.

Symbol Used in this Manual

Note:

Indicates special notes and operating fea-

tures.

Storing Discs

After playing, store the disc in its case. Do not

expose the disc to direct sunlight or sources of heat

and never leave it in a parked car exposed to direct

sunlight.

Tip:

Indicates tips and hints for making the task

easier.

A section whose title has one of the following sym-

bols are applicable only to those discs represented

by the symbol.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic-

ture quality and sound distortion. Before playing,

clean the disc with a clean cloth. Wipe the disc from

the center out.

DVD ALL All DVD discs listed below.

-RW

DVD-RW with VR recording mode

DVD-RW with Video recording mode

Video

-RW

RAM DVD-RAM disc

+RW DVD+RW disc

-R DVD-R disc

+R DVD+R (DL) disc

DVD DVD-Video disc

ACD Audio CDs

Do not use strong solvents such as alcohol, benzine,

thinner, commercially available cleaners, or anti-static

spray intended for older vinyl records.

MP3 MP3 files

WMA WMA files

JPEG JPEG files

Moisture Condensation

Never operate this product immediately after mov-

ing it from a cold location to a warm location. Leave

it for two or three hours without operating it. If you

use this product in such a situation, it may damage

discs and internal parts.

Recordable and Playable Discs

DVD-RW (DVD - ReWritable)

ꢀ DVD-RW discs can be formatted for VR mode recording or Video mode recording.

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

[VR mode]

ꢀ Recordings can be extensively edited

ꢀ Playable only on VR mode compatible players (after finalization)

[Video mode]

ꢀ Playable on regular DVD players (after finalization)

ꢀ Limited editing features

DVD-R (DVD - Recordable)

ꢀ These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.

ꢀ DVD-R discs can be only formatted to Video mode.

ꢀ Playable on regular DVD players (after finalization)

ꢀ Limited editing features

DVD-RAM (DVD - Random Access Memory)

ꢀ DVD-RAM discs can be formatted for VR mode recording.

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

ꢀ Playable on DVD-RAM compatible players.

ꢀ Recordings can be extensively edited.

ꢀ Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.

ꢀ You cannot use the cartridge-type DVD-RAM disc in this unit.

DVD+RW (DVD + ReWritable)

ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the

same Disc.

ꢀ Playable on DVD+RW compatible players (automatic finalization)

ꢀ The edited contents are playable on DVD+RW compatible players only after finalization.

ꢀ Recordings can be edited.

DVD+R (DVD + Recordable)

ꢀ These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any

more.

ꢀ Playable on DVD+R compatible players (after finalization)

ꢀ Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added

chapter mark, etc.)

ꢀ Limited title/chapter editing features.

DVD+R DL (DVD + Recordable; Double Layer)

ꢀ These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or edit it any

more.

ꢀ Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up to 8.5GB

of video on a single DVD+R DL disc.

ꢀ Playable on DVD+R compatible players (after finalization)

ꢀ Any edited contents are not compatible on DVD+R DL compatible players. (Hide, chapter combine, added

chapter mark, etc.)

ꢀ Limited title/chapter editing features.

Recommended recordable DVD discs

DVD-R

DVD+R

DVD-RW

Mitsubishi (4x)

Verbatim (4x)

JVC (4x)

DVD+RW

Mitsubishi (4x)

SONY (2.4x)

Verbatim (2.4x)

Ricoh (2.4X, 4x)

DVD+R DL

DVD-RAM

Mitsubishi (8x, 16x)

Mitsubishi (2.4x)

Fujifilm (2x)

That’s (8x, 16x)

Ricoh (8x, 16x)

Maxell (2.4x)

Mitsubishi (3x)

SONY (16x)

Victor (4x)

Maxell (4x)

Playable Discs

DVD (8 cm / 12 cm disc)

Discs such as movies that can be purchased or rented

Audio CD (8 cm / 12 cm disc)

Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased

CD-R/CD-RW (8 cm / 12 cm disc)

CD-R/CD-RW discs that contain audio titles, MP3, WMA or JPEG files.

Notes:

•

Depending on the conditions of the recording equipment or the CD-R/RW (or DVD R/RW) disc itself, some

CD-R/RW (or DVD R/RW) discs cannot be played on the unit.

•

Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.

Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD R/RW)

may not be playable.

•

DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD

Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s

lens.

If you record a disc using a personal computer, even if it is recorded in a compatible format, there are

cases in which it may not play because of the settings of the application software used to create the disc.

(Check with the software publisher for more detailed information.)

•

This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different

types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain

pre-existing conditions (see above) to ensure compatible playback.

Customers should note that permission is required in order to download MP3 / WMA files and music from

the Internet. Our company has no right to grant such permission. Permission should always be sought

from the copyright owner.

Regional Code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as

the rear of the unit or “ALL”.

Notes on Regional Codes

•

Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number

must match your unit’s regional code or the disc cannot play.

•

If you try to play a DVD with a different regional code from the unit, the message “Incorrect region code.

Can’t play back” appears on the TV screen.

What is SIMPLINK?

Some functions of this unit are controlled by TV’s remote control when this unit and LG TV with

SIMPLINK are connected through HDMI connection.

•

Controllable functions by LG TV’s remote control: Play, Pause, Scan, Skip, Stop, Power Off, etc.

Refer to the TV owner’s manual for the details of SIMPLINK function.

LG TV with SIMPLINK function has the logo as shown above.

Restrictions on video recording

•

You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video

discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording

will pause or stop automatically and an error message will be displayed on-screen.

•

Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVD-RAM disc

with CPRM (see below).

What is ‘CPRM’?

CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast

programs. CPRM stands for Content Protection for Recordable Media.

This Recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you

cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs format-

ted in VR mode or DVD-RAM discs, and CPRM recordings can only be played on players that are specifically

compatible with CPRM.

•

Recording equipment should be used only for lawful copying and you are advised to check carefully what is

lawful copying in the area in which you are making a copy. Copying of copyright material such as films or

music is unlawful unless permitted by a legal exception or consented to by the rights owner.

•

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.

Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended

for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation.

Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Use

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPAT-

IBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE

OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH

THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING

YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD RECORDER, PLEASE CONTACT OUR CUS-

TOMER SERVICE CENTER.

Compatible USB Flash Drive

Using an USB Flash Drive

1. USB Flash Drive which require additional program

installation when you have connected it to a com-

puter, is not supported.

This unit can play the MP3 / WMA / JPEG files con-

tained in the USB Flash Drive.

2. USB Flash Drive: USB Flash Drive that support

USB1.1.

Inserting/Removing the USB Flash

Drive

Using the USB Flash Drive

1. Insert an USB Flash Drive.

2. Press HOME on the Remote Control.

3. Select [MUSIC] or [PHOTO] option.

4. Select [USB] then press ENTER.

Details for the options are on page 20.

5. Press RETURN (O) to exit the MUSIC or

PHOTO List menu before extracting the USB

Flash Drive.

Inserting the USB Flash Drive

Insert straight-in until it fits into place.

Removing the USB Flash Drive

Withdraw the USB Flash Drive carefully.

Note:

ꢀ Keep the USB Flash Drive out of reach of children.

If swallowed, seek medical advice immediately.

ꢀ This unit supports only USB Flash Memory with

FAT16 or FAT36 format.

^ꢀDo not extract the USB Flash Drive in operating

(play, move, etc.).

Battery installation

About the Remote Control

Detach the battery cover on the rear

of the Remote Control, and insert two

(R03/AAA) size batteries with 3 and

# aligned correctly.

Operation Range

Point the Remote Control at the Remote Sensor

and press the buttons.

Distance: About 23 ft (7 m) from the front of the

Do not mix old and new batteries and never

mix different types of batteries such as stan-

dard, alkaline, etc.

Remote Sensor.

Angle:

About 30° in each direction of the front of

the Remote Sensor.

Front Panel

e f g h i

1 POWER

Switches the Recorder ON and OFF.

N / X (PLAY / PAUSE)

Starts playback.

Pause playback or recording temporarily,

press again to exit pause mode.

Disc Tray

Insert a disc here.

x (STOP)

Stops playback

Display window

Shows the current status of the Recorder.

z (REC)

Starts recording.

Press repeatedly to set the recording time.

TV: Indicates when the recorder is in TV tuner

mode.

REC: The recorder is recording.

CH (v/V)

Scans up or down through memorized

channels.

: Indicates when the recorder is in timer

recording or a timer recording is programmed.

: Shows the current status of the

recorder (clock, etc).

USB Port

Connect an USB Flash Drive.

Remote Sensor

Point the recorder Remote Control here.

DV IN

Connect the DV output of a digital camcorder.

Z (OPEN/CLOSE)

Opens or closes the disc tray.

AV IN 2 (VIDEO /AUDIO (Left/Right))

Connect the audio/video output of an external

source (Audio system, TV/ Monitor, VCR,

Camcorder, etc.).

RES.

Sets the output resolution for HDMI and COM-

PONENT OUTPUT jacks.

- HDMI: 1080i, 720p, 480p, 480i

- COMPONENT: 480p, 480i

Precautions in using the touch pad

The LEDs on the touch pad lights only when the

Touch Pad Operation

ꢀ

The buttons from e to i are touch pad type but-

ton that is operated with brief touch.

power of the unit is on.

Use the touch pad with clean and dry hands.

Do not press the button on the touch pad with too

ꢀ

When you operate the button on the touch pad, you

should follow the directions as below.

ꢀ

much force.

ꢀ

Do not touch the button on the touch pad with any

1. Touch the any button on the touch pad.

The LEDs on the touch pad light up.

conductive material such as metalic object.

It may cause a malfunction.

2. Touch the button you want to operate.

The LEDs on the touch pad will be off in 10 sec-

onds after the operation.

Remote Control

DASH (-)

Enters a channel number for multiple

channels such as 2-1, 2-2, etc.

ꢀ ꢀ ꢀ ꢀ ꢀ

AUDIO

TV/DVD

Selects an audio language or an audio

channel.

To view channels selected by the DVD

Recorder tuner or by the TV tuner.

SUBTITLE

Selects a subtitle language.

TV Control Buttons

See page 51.

ZOOM

Enlarges DVD video image.

ꢀ ꢀ ꢀ ꢀ ꢀ

I.SKIP (INSTANT SKIP)

Skips 30 seconds forward during

playback.

SCAN (m/M)

Search backward or forward.

z REC

Starts recording. Press repeatedly to

set the recording time.

SKIP (. / >)

Go to next chapter or track. Returns to

beginning of current chapter or track or

go to previous chapter or track.

REC MODE

Selects the recording mode (XP, SP,

LP, EP or MLP).

PAUSE/STEP (X)

Pause playback or recording

temporarily.

Press repeatedly for frame-by-frame

playback.

TITLE

Displays the disc’s Title menu, if

available.

THUMBNAIL

PLAY (N)

Starts playback.

Selects a thumbnail picture for the

current title for use in the Title List

menu.

STOP (x)

Stops playback or recording.

PLAY MODE

Selects play mode.

MARKER

Marks any point during playback.

ꢀ ꢀ ꢀ ꢀ ꢀ

Displays Marker Search menu.

HOME

Accesses or removes the HOME

menu.

CHP. ADD

Inserts a chapter marker when playing/

recording.

CH (+/-)

Selects a channel.

TIME SHIFT

FAV. CH (+/-)

Tunes to your favorite channels.

To play the title being recorded

and also currently being recorded

appears as PIP.

ꢀ ꢀ ꢀ ꢀ ꢀ

MENU/LIST

Accesses menu on a DVD disc, Title

List or Playlist menu.

CLEAR

Removes a mark on the Marker

Search menu.

POWER (1)

Turns Recorder ON and OFF.

b B v V (left/right/up/down)

Selects menu options.

INPUT

Changes the input to use for recording

(Tuner, AV1, AV2, or DV IN).

ENTER (ꢁ)

Confirms menu selections.

PIP

DISPLAY

Accesses On-Screen Display.

Displays information of current status.

Selects PIP function on or off.

OPEN/CLOSE (Z)

Opens and closes thie disc tray.

RETURN (O)

Removes the menu.

0-9 numerical buttons

- Selects numbered options in a menu.

- Inputs channel numbers.

Rear Panel

h i

ANTENNA IN (FROM ANT)

Connect the antenna to this terminal.

OPTICAL (DIGITAL AUDIO OUTPUT)

Connect to digital (optical) audio equipment.

COMPONENT OUTPUT (Y P^BPR)

Connect to a TV with Y PB PR inputs.

COAXIAL (DIGITAL AUDIO OUTPUT)

Connect to digital (coaxial) audio equipment.

INPUT 1 (VIDEO/AUDIO (Left/Right))

S-VIDEO OUTPUT

Connect to a S-Video Input on TV.

Connect the audio/video output of an external

source (Audio system, TV/Monitor, VCR,

Camcorder).

AUDIO OUTPUT (Left/Right)

Connect to a TV or other equipment with audio

inputs.

HDMI OUTPUT

HDMI output providing a high quality interface

for digital audio and video.

VIDEO/AUDIO OUTPUT (Left/Right)

Connect to a TV with video and audio inputs.

AC Power Cord

Plug into the power source.

IR TRANSMITTER

Connect the IR control cable (if used).

ANTENNA OUT (TO TV)

Connect to a TV with ANTENNA coaxial inputs

Caution:

Do not touch the inner pins of the jacks on the rear panel.

Electrostatic discharge may cause permanent damage to the unit.

Hookup and Settings

Depending on your TV and other equipment

there are various ways you can connect the

Antenna

recorder. Please refer to the manuals of your

TV, VCR, Stereo System or other devices as

necessary for additional connection informa-

tion.

Notes:

•

Make sure the Recorder is connected directly to the TV

and tune the TV to the correct video input channel.

Do not connect the Recorder’s AUDIO OUTPUT jack to

the phono in jack (record deck) of your audio system.

Do not connect the Recorder via another VCR. The

DVD image could be distorted by the copy protection

system.

•

The picture and sound of a nearby TV, VCR, or radio

may be distorted during playback. Position the units

away from each other or turn off the unit after removing

the disc.

Rear of Recorder

Connecting an Antenna

or Cable TV

a Antenna:

To view or record a CATV channel

Disconnect the antenna from the rear of the TV and

identify the antenna cable. If it is a round 75 ohm

coaxial cable connect it directly to the jack marked

ANTENNA IN on your Recorder. If your antenna

cable is flat connect it to a 300-ohm to 75-ohm anten-

na adaptor (not supplied) and slip the adaptor over

the ANTENNA IN jack. Don’t attempt to screw it into

to the Recorder.

1. Tune the TV to the Recorder output channel

(CH 3 or 4).

2. Set the Recorder channel selector to the cable

output channel. (Example: CH3)

3. Select a channel using the cable converter.

Notes:

•

With this connection, you cannot record one program

while viewing another.

b Cable TV:

•

If you are using a cable box to tune channels, it is not

necessary to do Auto Channel Set.

If your cable connection has no converter or

descrambler, unscrew the cable from your TV and

attach it to the ANTENNA IN jack on the Recorder.

If a converter is required connect a coaxial cable from

the wall jack to the IN connector on the converter,

and a coaxial cable from the OUT connector on the

converter to the ANTENNA IN on your Recorder. This

cable hookup permits both TV and Recorder opera-

tion.

Notes:

Connections to your TV

•

Set the resolution to 480p using RES. button on the

front panel for progressive signal.

Make one of the following connections, depending on

the capabilities of your TV.

Progressive Scan does not work with the RF, Video or

S-Video connections.

RF coaxial connection

If your TV does not accept the Progressive Scan format,

the picture will appear scrambled.

Connect the ANTENNA OUT jack on the Recorder to

the antenna in jack on the TV using the supplied 75-

ohm Coaxial Cable (R).

If the resolution is set to 720p or 1080i, the VIDEO

OUTPUT, S-VIDEO OUTPUT and COMPONENT OUT-

PUT connections are not available.

How to set the Recorder’s RF output channel

Audio connection

Connect the Left and Right AUDIO OUTPUT jacks on

the Recorder to the audio left/right in jacks on the TV

using the supplied audio cables (A1 or A2).

1. When the Recorder is turned off, press and hold

CH (V/v) on the front panel for more than five

seconds. [ch 03] or [ch 04] appears in the display

window.

Rear of TV

2. Press CH (V/v) to change the RF output channel

COMPONENT/PROGRESSIVE SCAN

VIDEO INPUT

AUDIO INPUT

S-VIDEO

INPUT

(ch 03 or ch 04).

3. Tune the TV to this channel.

Video connection

Connect the VIDEO OUTPUT jack on the Recorder

to the video in jack on the TV using the video cable

supplied (V).

Rear of Recorder

Note:

If you use this connection, set the TV’s source selector to

VIDEO.

S-Video connection

Connect the S-VIDEO OUTPUT jack on the Recorder

to the S-Video in jack on the TV using the optional

S-Video cable (S).

Component Video connection

If your television is a high-definition or “digital ready”

television, you may take advantage of the Recorder’s

progressive scan output for the highest video resolu-

tion possible.

Rear of TV

Connect the COMPONENT OUTPUT jacks on the

Recorder to the corresponding in jacks on the TV

using an optional Y PB PR cable (C).

HDMI compatible TV

HDMI connection

HDMI

If you have a HDMI TV or monitor, you can connect it

to this recorder using a HDMI cable.

1. Connect the HDMI OUTPUT jack on the recorder

to the HDMI INPUT jack on a HDMI compatible TV

or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s

Owner’s manual).

Notes:

• If your TV is NOT capable of handling 96 kHz sam-

pling frequency, set the [Sampling Freq.] option to

[48 kHz] on the setup menu (See page 23). When

this choice is made, this unit will automatically con-

vert any 96 kHz signals to 48 kHz so your system

can decode them.

HDMI has the capability to support standard, enhanced,

or high-definition video plus standard to multi-channel

surround-sound audio, HDMI features include uncom-

pressed digital video, a bandwidth of up to 5 gigabytes

per second, one connector (instead of several cables

and connectors), and communication between the AV

source and AV devices such as DTVs.

•

If your TV is not equipped with Dolby Digital and

MPEG decoder, set the [Dolby Digital] and [MPEG]

options to [PCM] on the setup menu (See page 23).

• If your TV is not equipped with DTS decoder, set

the [DTS] options to [OFF] on the setup menu (See

page 23). To enjoy DTS multi channel surround,

you must connect this recorder to a DTS compati-

ble receiver via one of this recorder’s digital audio

outputs.

• The arrow on the cable connector body should face

up for correct alignment with the connector on the

recorder.

HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI licensing LLC.

Additional Information for HDMI

•

When you connect a HDMI or DVI compatible

device make sure of the followings:

- Try switching off the HDMI/DVI device and this

recorder. Next, switch on the HDMI/DVI device

and leave it for around 30 seconds, then switch

on this recorder.

(Type A)

- The connected device’s video input is set

correctly for this unit.

- The connected device is compatible with

720(1440)x480i, 720x480p, 1280x720p, or

1920x1080i video input.

•

If there is noise or lines on the screen, please

check the HDMI cable.

Not all HDCP-compatible

•

Not all HDCP-compatible DVI devices will work

with this recorder.

- It’s impossible copy protected-DVD title’s play-

back in non-HDCP devices.

Tip:

When you use HDMI connection, you can change the

resolution (480i, 480p, 720p, or 1080i) for the HDMI

output using RES. button on the front panel.

For best performance, directly connect the HDMI

output to an HDMI input on your TV. If connecting

to some device other than a TV or monitor, such

as a home theater receiver with an HDMI input,

check the following to make sure the HDMI signal

will be received correctly:

Caution:

ꢀ Changing the resolution when the recorder is con-

nected with HDMI connector may result in malfunc-

tions. To solve the problem, turn off the recorder

and then turn it on again.

ꢀ If your TV does not accept your resolution setting,

abnormal picture appears on the screen.

Please read TV’s owner’s manual then set the res-

olution that your TV can accept.

Check the operating instructions of the con-

nected device to make sure that the HDMI

input of the device complies with HDMI-HDCP

specifications.

Check that the HDMI setup menu of any non-

display device is set to “pass-through” so that

HDMI signals received are not changed in any

way (such as changing the video or audio for-

mat).

About HDMI

HDMI (High Definition Multimedia Interface) supports

both video and audio on a single digital connection for

use with DVD Players, Set-Top Boxes, and other AV

devices.

HDMI was developed to provide the technologies of

HDCP (High Definition Contents Protection). HDCP is

used to protect digital content transmitted and received.

Connection to an Amplifier

Connecting to an amplifier equipped with two

channel analog stereo or Dolby Pro Logic II/Pro

Logic

Rear of Recorder

Connect the Left and Right AUDIO OUTPUT jacks on

the Recorder to the audio left and right in jacks on

your amplifier, receiver, or stereo system using the

audio cables (A) supplied.

Connecting to an amplifier equipped with two chan-

nel digital stereo (PCM) or to an Audio/Video receiv-

er equipped with a multi-channel decoder (Dolby

Digital™, MPEG 2, or DTS)

1. Connect one of the Recorder’s DIGITAL AUDIO

OUTPUT jacks (OPTICAL O, COAXIAL X) to the

corresponding in jack on your amplifier. Use an

optional digital (optical O, coaxial X) audio cable.

2. You will need to activate the Recorder ’s digital

output. (See [Audio Settings] on page 23).

Digital Multi-channel sound

OPTICAL

COAXIAL

DIGITAL INPUT

A digital multi-channel connection provides the best

sound quality. For this you need a multi-channel

Audio/Video receiver that supports one or more of the

audio formats supported by your Recorder (MPEG 2,

Dolby Digital and DTS). Check the receiver manual

and the logos on the front of the receiver.

DIGITAL INPUT

AUDIO INPUT

Amplifier (Receiver)

Caution:

Due to the DTS Licensing agreement, the digital

output will be in DTS digital out when DTS audio

stream is selected.

Manufactured under license from Dolby

Laboratories. “Dolby”, “Pro Logic”, and the

double-D symbol are trademarks of Dolby

Laboratories.

Notes:

DTS and DTS Digital Out are trademarks of

Digital Theater Systems, Inc.

•

If the audio format of the digital output does not match the

capabilities of your receiver, the receiver will produce a

strong, distorted sound or no sound at all.

•

Six Channel Digital Surround Sound via digital connec-

tion can only be obtained if your receiver is equipped

with a Digital Multi-channel decoder.

•

To see the audio format of the current DVD in the on-

screen display, press AUDIO.

This Recorder does not perform internal (2 channel)

decoding of a DTS sound track. To enjoy DTS multi

channel surround, you must connect this Recorder to a

DTS compatible receiver via one of this Recorder’s digi-

tal audio outputs.

•

While viewing a digital channel, the 2 channel stereo

audio is only output through the audio output jacks.

Connecting a Digital

Camcorder

Accessory Audio/Video (A/V)

Recorder

Connections to

Connect the INPUT 1 or AV IN 2 jacks on the

Recorder to the audio/video out jacks on your acces-

sory component, using the optional audio/video

cables. (Refer to page 41 for [Recording from

External Components].)

Use a DV cable (not supplied) to connect the DV

in/out jack of your DV Digital Camcorder to the front

panel DV IN jack of this Recorder.

Notes:

ꢀ This jack is for connection to DV equipment only. It

is not compatible with digital satellite tuners or D-

VHS video decks.

ꢀ Disconnecting the DV cable while recording a con-

tents of the connected digital camcorder may result

in malfunction.

DV Digital Camcorder

IN/OUT

Rear of Recorder

Front of Recorder

Cable Box,

Satellite Box

Digital Video Recorder or

Other Set-Top Boxes

Connecting the IR control

cable

The Recorder sends commands to your connected

Set-Top Box to change the channels of it through the

IR control cable when AV1 timer recording starts.

VIDEO

OUT

AUDIO OUT

ANTENNA OUT

1. Connect the plug of the IR control cable to the IR

TRANSMITTER jack on the Recorder.

IR Blaster

Front

2. Find the Set-Top Box IR Sensor. Refer to “How to

find the IR sensor on the Set-Top Box” on right.

3. On the IR control cable, attach the adhesive tape

(included) to the flat surface just below of the IR

Blaster on the IR control cable.

Control

Cable

4. Place the IR Blaster in front of the IR sensor on

your Set-Top Box approximately one inch away

from the remote sensor.

After connecting, make the necessary setting

(page 25).

Notes:

Rear of Recorder

•

If your Set-Top Box does not have Audio/Video

Out jacks, you cannot use the AV1 timer recording

using this connection

Important, for the Recorder to record programs

received through the Set-Top Box, the Set-Top

box must remain turned on at all times.

How to find the IR sensor on the

Set-Top Box

1. Turn off the Set-Top Box.

If your Set-Top Box has IR and RF control togeth-

er, set the control to IR on the Set-Top Box to use

this IR connection

2. Hold the Remote Control of the Set-Top Box so

that it touches the front of the device.

Do not connect an accessory other than the sup-

plied IR control cable to the IR TRANSMITTER

jack.

•

Do not cover the transmitter.

Not all Set-Top Box devices will work with this

Recorder.

Yes

•

Refer to the owner’s manual of the connected

Set-Top Box as well.

3. Slowly move the Remote Control across the front

of the device while pressing POWER button On

and Off. You must press and release the

Caution:

Do not use RF coaxial cable to connect the

Set-Top Box

POWER button each time you move the Remote

Control (holding down the button will not work).

Recommended Set-Top Box devices

ꢀ

Cable Box: Motorola, Pioneer, Scientific Atlanta,

Sony

Satellite Box: DirecTV, Echostar, Dish NetWork,

HTS, Hughes, JVC, Proscan, RCA, Sony

Digital Video Recorder: Tivo, DirecTV,

Dish NetWork, Scientific Atlanta, Motorola,

Hughes, Humax, Philips, Sony

4. When the cable box turns on, you have found the

sensor. Remember the location of the sensor.

5. Enter the necessary information for date, year and

time.

Initial Setup Wizard

After the POWER is pressed for the first time to turn

on the unit, the Initial Setup Wizard function sets the

Language, Channels and Clock step-by-step until the

setup is complete.

1. Use v / V to select a language for the Setup

menu and information display then press ENTER.

b / B (left/right): Moves the cursor to the

previous or next column.

v / V (up/down): Changes the setting at the

current cursor position.

Press ENTER to confirm your setting.

6. Press ENTER to exit the menu.

2. Check your antenna connections.

Press B to move next step.

3. Select the [Tuning Band] option then press B .

TV is for over-the-air antenna reception.

CATV is for cable subscribers.

Note:

You can reset the Initial Setup Wizard from the

[Factory Set] in the setup menu. (see page 21).

4. Press ENTER to begin the channel search.

You can skip the analog channel scanning by

pressing B.

Easy Menu

Using the Home Menu

•

Disc Manager: Displays Disc setup menu. (See

page 26)

From the Home Menu screen you can access all the

Media for playback and recording of the recorder.

Rec. Mode: Displays Record Mode setup menu.

(See page 24)

1. Press HOME and the Home menu appears.

2. Use b / B to select the desired main option.

DV Input: Displays DV Input mode. (See page

3. Use v / V to select the desired Sub option then

42)

press ENTER to confirm your selection.

Initial Settings

4. To exit the HOME menu, press HOME.

In this menu system, there are several ways to cus-

tomize the settings provided. Most menus consist of

three levels to set up the options, but some require

greater depth for the variety of settings.

Setup

•

Start: Displays Setup menu.

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

•

Auto Ch. Scan: Displays [Auto Channel Set]

menu. (See page 21)

•

Channel Edit: Displays Channel Edit setup

menu. (See page 21)

Channel List: Displays the Channel List menu.

(See page 27)

Timer Record: Displays [Timer Record] menu.

(See page 38)

3. Use v / V to select the desired option.

Movie

4. While the desired item is selected, press B to

•

DISC:

move to the second level.

Displays TITLE LIST menu for recordable disc

(page 43)

5. Use v / V to select the second desired option.

Plays back DVD-Video disc (page 29-32).

6. Press B to move to the third level.

Photo (See page 34-35)

7. Use v / V to select the desired setting then press

ENTER to confirm your selection.

•

DISC: Displays [Photo List] menu for disc.

Some items require additional steps.

•

USB: Displays [Photo List] menu for USB Flash

Drive.

8. Press RETURN (O) or HOME to exit the Setup

menu.

Music (See page 33)

Note:

•

DISC: Displays [Music List] menu for disc.

Press b to go back to the previous level.

•

USB: Displays [Music List] menu for USB Flash

Drive.

4. Use v / V to select an option then press ENTER.

General Settings

ꢀ

[Add] Adds a unmemorized channel manually.

Auto Channel Set

This recorder is equipped with a frequency

synthesized tuner capable of receiving the analog

and digital channels.

ꢀ

[Delete] Deletes a memorized channel from

channel list. A digital channel has multiple

channels, so if you delete the digital channel,

all multiple channels will be deleted.

[Skip On/Off] (for memorized digital channel only)

Set the channel to the skipped channel.

The skipped channel number will dim.

The channel cannot be selected using the

CH (+/-) button during normal TV viewing.

ꢀ

[Favorite On/Off] Set the memorized channel to

favorite channel. (favorite channel shows

heart (♥) icon.)

[MFT Adjust] (for memorized analog channel only)

To obtain a clearer picture, tune the MFT option.

5. Press RETURN (O) repeatedly to exit Channel

1. Select the [Auto Channel Set] option then press B.

List menu.

2. Use v / V to select the tuning band (TV or

CATV) option.

Clock Set

TV is for over-the-air antenna reception.

CATV is for cable subscribers.

You can set the clock.

3. Press B to highlight [Start] icon.

1. Select the [Clock Set] option then B.

4. Press ENTER to begin the channel search.

You can skip the analog channel scanning by

pressing B while scanning analog channel.

The tuner will automatically cycle through all

available channels in the area and place them in

the tuner’s memory.

2. Enter the necessary information for year, date

and time.

b / B (left/right): Moves the cursor to the

previous or next column.

v / V (up/down): Changes the setting at the

current cursor position.

3. Press ENTER to confirm your setting.

Notes:

•

If you want to change the [Band] option, you must exe-

cute the auto channel search after changing the [Band]

option.

TV Aspect

[4:3 Letter Box]: Select when a standard 4:3 TV

is connected. Displays theatrical images with

masking bars above and below the picture.

•

This Recorder supports only unencrypted channels for

cable subscribers.

[4:3 Pan Scan]: Select when a standard 4:3 TV is

connected. Displays pictures cropped to fill your

TV screen. Both sides of the picture are cut off.

Channel Edit

You can edit a channel manually (add, delete, etc.).

[16:9 Wide]: Select when a 16:9 wide TV is con-

1. Select the [Channel Edit] option then press B .

nected.

2. Press ENTER while the [Edit] icon is highlighted.

The Channel List menu appears.

Power Save Mode

Set Power Save Mode to [ON] to place your

Recorder into an economic power save mode.

Nothing is displayed in the display window when the

unit is turned off.

Factory Set

You can reset the Recorder to its original factory

settings.

1. Select the [Factory Set] option.

2. Press B to select [SET] then press ENTER.

3. Use b / B / v / V to select a channel number

then press ENTER.

3. Select [OK] and press ENTER.

4. Follow the Initial Setup Wizard on page 19.

DTV Caption Style

Selects the style for caption.

Language Settings

Note:

[Set by program] Default caption type provided by a

broadcaster is shown when captions appear.

You can set [DTV Caption], [DTV Caption Style],

[DTV Caption Option] and [DTV Audio] options only while

viewing digital TV.

[Custom] Customized text is shown when captions

appear. Use [DTV Caption Option] to customize the

caption type.

DTV Caption Option

You can set [DTV Caption Option] only when [DTV

Caption Style] is selected in [Custom].

Font: Selects the font type for captions.

Size: Selects the font size for captions.

Color: Selects the font color for captions.

Display Menu

Select a language for the Setup menu and

information display.

Opacity: Selects the font opacity for captions.

- Solid: The text is solid (without any transparency).

- Flash: The text blinks once a second.

- Transparent: The text is transparent (In this case,

whatever the color is, the color does not affect the

captions display).

Disc Menu / Audio / Subtitle

[Original]: Refers to the original language in

which the disc was recorded.

- Translucent: The text is translucent.

BG (Background) Color: Selects the background

[Others]: To select another language, press num-

ber buttons then ENTER to enter the

corresponding 4-digit number according to the

language code list in the reference chapter (see

page 52). If you enter the wrong language code,

press CLEAR.

color for captions.

BG (Background) Opacity: Selects the back-

ground opacity for captions.

- Solid: The text background color is solid (without

any transparency).

- Flash: The text background color blinks once a

second.

[OFF] (for Disc Subtitle): Turn off Subtitle.

- Transparent: The text background color is trans-

parent (In this case, whatever the background

color is, the color does not affect the captions.).

- Translucent: The text background color is

translucent.

DTV Caption

Digital channels sometimes provide caption, often in a

different language. You can set a default caption lan-

guage with this setting. If you select [Off], DTV

Caption is not displayed.

Edge Type: Selects the edge type for captions.

- None: The text has no edge.

- Raised: The text is raised.

- Depressed: The text is depressed.

Note:

- Uniform: The text has a uniform edge.

- Left Shadow: The text has a left-shadow edge.

- Right Shadow: The text has a right-shadow edge.

DTV caption will appear only if provided by the broad-

caster.

Tips:

Edge Color: Selects the edge color for captions.

ꢀ If available, you can also select a caption language

while viewing digital TV viewing, press SUBTITLE

repeatedly.

DTV Audio

Digital channels sometimes provide multiple audio

tracks, often in a different language. You can set a

default audio language with this setting.

ꢀ If captions are available, the DTV caption icon (

appears on the channel information display to indi-

cate that you can select one of those caption with

the SUBTITLE button.

)

Tip:

ꢀ Analog Caption is not displayed on this Recorder.

If provided by the broadcaster, the

(DTV

If your TV has the Analog Caption function, you can

switch the Analog Caption using the TV. If analog

and digital caption is overlapped on the TV screen,

switch off one of two captions.

Multiple Audio Icon) appears on the channel informa-

tion display to indicate that you can select one of

those audio languages with the AUDIO button.

Vocal

Audio Settings

Set Vocal to [ON] only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Each DVD disc has a variety of audio output options.

Set the Recorder’s Audio Output according to the

type of audio system you use.

Lock (Parental Control)

Settings

Rating

Blocks playback of rated DVDs based on their

content. Not all discs are rated.

1. Select [Rating] option then press B.

Dolby Digital / DTS / MPEG

[Bitstream]: Select [Bitstream] if you connect the

DIGITAL AUDIO OUTPUT jack to an amplifier or

other equipment with a Dolby Digital, DTS or

MPEG decoder.

[PCM] (for Dolby Digital / MPEG): Select when

connected to a two-channel digital stereo amplifi-

er. DVDs encoded in Dolby Digital or MPEG will

be automatically downmixed to two-channel PCM

audio.

2. To access the Rating, Password and Area Code

features, you must input the 4-digit security code

you created.

[OFF] (for DTS): If you select [OFF], the DTS

signal is not output through the DIGITAL AUDIO

OUTPUT

If you have not yet entered a security code you are

prompted to do so. Input a 4-digit code. Enter it

again to verify. If you make a mistake press

CLEAR.

Sampling Freq. (Frequency)

If your receiver or amplifier is NOT capable of han-

dling 96 kHz signals, select 48 kHz. When this choice

is made, this unit automatically converts any 96 kHz

signals to 48 kHz so your system can decode them.

3. Select a rating from 1 to 8 using the v / V buttons.

[1]-[8]: Rating one (1) has the most restrictions

and rating eight (8) is the least restrictive.

If your receiver or amplifier is capable of handling 96

kHz signals, select 96 kHz. When this choice is

made, this unit passes each type of signal through

without any further processing.

[No Limit]: If you select [No Limit], parental

control is not active and the disc plays in full.

4. Press ENTER to confirm your rating selection,

then press HOME to exit the menu.

Check the documentation for your amplifier to verify

its capabilities.

5. Press OPEN/CLOSE (Z) to activate parental con-

trol.

DRC (Dynamic Range Control)

Note:

With the DVD format, you can hear a program’s

soundtrack in the most accurate and realistic presen-

tation possible, thanks to digital audio technology.

However, you may wish to compress the dynamic

range of the audio output (the difference between the

loudest sounds and the quietest ones). This allows

you to listen to a movie at a lower volume without los-

ing clarity of sound. Set DRC to [ON] for this effect.

If you set a rating for the recorder, all disc scenes with the

same rating or lower are played. Higher rated scenes are

not played unless an alternate scene is available on the

disc. The alternative must have the same rating or a lower

one. If no suitable alternative is found, playback stops. You

must enter the 4-digit password or change the rating level in

order to play the disc.

Set Password

Recording Settings

You can enter or change password.

1. Select [Set Password] option then press B.

2. Follow step 2 as shown [Rating].

To change the password, press ENTER when the

[Change] option is highlighted, then input old pass-

word. Input new password. Enter it again to verify.

To delete the password, select [Delete] option then

press ENTER, then input old password. The pass-

word is deleted.

3. Press HOME to exit the menu.

If you forget your password

Disc Record Mode

If you forget your password you can clear it using the

following steps:

You can set the picture quality for recording;

XP (High Quality), SP (Standard Quality),

LP (Low Quality), EP (Extend Quality),

MLP (Maximum Long Play).

1. Press HOME and the Home menu appears.

2. Select [Setup] > [Start] and press ENTER.

3. Input the 6-digit number [210499]. The message

appears, select [OK] then press ENTER. The

security code is cleared.

1. Select the [Disc Record Mode] option then press

2. Use v / V to select a desired Disc Record Mode

4. Enter a new code as described above.

(XP, SP, LP, EP or MLP).

3. Press ENTER to confirm your selection, then

press HOME to exit the menu.

Area Code

Enter the Area Code whose standards were used to

rate the DVD video disc, based on the list in the

reference chapter (see page 52).

DV Record Audio

You need to set this if you have a camcorder using

32kHz/12-bit sound connected to the front panel DV

IN jack. Some digital camcorders have two stereo

tracks for audio. One is recorded at the time of shoot-

ing; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded

while shooting is used. On the Audio 2 setting, the

overdubbed sound is used.

1. Select [Area Code] option then press B.

2. Follow step 2 as shown [Rating].

3. Select the first character using v / V buttons.

4. Shift the cursor using B buttons and select the

second character using v / V buttons.

5. Press ENTER to confirm your area code

selection, then press HOME to exit the menu.

Auto Chapter

During recording, chapter markers are added auto-

matically at fixed intervals. You can set this interval to

5 minutes or 10 minutes. To turn off automatic chap-

ter marking, select [None].

Note:

If [Disc Record Mode] option is set to [MLP], the [5 Min]

option is not selectable.

Test Procedure

Set-Top Box Control

1) Check the IR control cable

connection then press

Select [ON] when you connect a Set-Top Box (Cable

Box, Satellite Box, Digital Video Recorder, etc) with

IR control cable. If not, select [OFF].

ENTER. (Refer to page 18.)

Set-Top Box Edit

This setting is available only if the [Set-Top Box

Control] option is set to [ON]. If you connect the

Recorder to the Set-Top Box as described in page 18

so the Recorder can change the channels on the

connected Set-Top Box when timer recording of AV1

input starts.

2) Turn on the Set-Top Box

then press ENTER.

3) Use b / B a Remote Control

Code of the device then

press ENTER.

1. Select [Set-Top Box Edit] on the setup menu then

press B. The [Edit] icon is highlighted.

2. Press ENTER while the [Edit] icon is highlighted.

[Set-Top Box Control] menu shows the current

settings.

The list of codes displayed onscreen are based on the

device type and brand you selected. Each brand of the

device can have multiple sets of codes. One code will be

tested at a time; if the code does not work, select another

code to test.

4) Use v / V / b / B and

ENTER to select a channel.

3. If you want to edit the settings, use b / B to

select [Edit] icon then press ENTER.

5) Confirm that your Set-Top

Box’s channel is changed to

the selected channel in

step 4.

The [Set-Top Box Edit] menu appears.

If changed, select [Yes] then press ENTER.

If not changed, select [No] then press ENTER and repeat

from step 3.

• Some Set-Top boxes may not be controlled if the device

needs sub channel input - the same as 19-1.

4. Use v / V to select a main option then press

6) The Test procedure is

complete, press ENTER to

exit the menu.

ENTER.

ꢀ [Device Type] Selects the device type.

ꢀ [Brand] Selects the brand of the Set-Top Box.

ꢀ [Number of Digits] Selects the number of digits

of the Set-Top Box’s channel.

[Enter Key] If your device needs ENTER key to

change channels, select [ON]. If not, select [OFF].

ꢀ [Key Speed] Select a Key Speed that the

recorder sends commands to the connected

Set-Top Box.

If you fail to test

ꢀ

•

Make sure IR Control Cable connection. (page 18)

Set the [Set-Top Box Edit] options again then proceed

to the [Test] option.

•

If IR control is not activated even though you set again,

the Recorder may not control your Set-Top Box accord-

ing to the device’s maker or status.

5. Use v / V to select a sub option then press ENTER.

6. Use v / V to select [Test] option then press ENTER

to verify the connections/settings between the

Set-Top Box and the Recorder. The recorder is

tuned to AV1 automatically. See right for details.

Confirm recommended Set-Top Box on page 18 or

contact your Set-Top Box provider.

3. Select [OK] then press ENTER.

The Recorder starts finalizing the disc.

Disc Settings

Initialize

Notes:

•

Finalization can take up to 3-4 minutes or more depend-

ing on the type of disc, how much is recorded on the

disc, and the number of titles on the disc.

If you load a completely blank disc, the recorder will

initialize the disc.

•

DVD-R: The recorder initialize the disc to Video mode.

The recording mode will always be Video mode.

•

DVD+R DL disc can take up to 30 minutes to finalize.

•

DVD-RW/ DVD+RW/DVD+R(DL)/DVD-RAM: The

Initialize menu will appears. Select [OK] then press

ENTER.

Tips:

•

If you load a DVD-RW that has already been finalized,

you can ‘Unfinalize’ it by choosing [Unfinalize] from the

Finalize menu. After doing this, you can edit and re-

record onto the disc.

You cannot unfinalize a DVD-R and DVD+R (DL) disc.

If [Disc Protect] option is set to [ON], the finalize is not

available. To finalize, set [Disc Protect] option to [OFF].

DVD-RW disc is initialized to Video mode.

Also, you can reformat the DVD-RW/DVD+RW/

DVD-RAM from the Setup menu as below.

•

Disc Label

Use the Disc Label feature to enter a name for the

disc. This name appears when you load the disc and

when you display disc information on-screen.

•

The Disc label can be up to 32 characters long.

For discs formatted on a different Recorder, you

will see only a limited character set.

1. Select the [Disc Label] option then press B.

1. Select the [Initialize] option then press B.

[Edit] icon is highlighted.

[Start] icon is highlighted.

2. Press ENTER.

Keyboard menu appears.

To enter characters, see page 47.

•

In case of DVD-RW, use b / B to select a

desired Disc Initialize Mode (VR Mode or Video

Mode) then press ENTER.

Disc Protect

•

In case of DVD+RW/DVD-RAM, use b / B to

select [OK], and press ENTER.

Depending on the type of disc you are using, Disc

Protect allows you to preserve your recordings in a

variety of ways:

It takes a few moments to format the disc.

Caution:

•

DVD+RW: Prevents editing, erasing, or overwrit-

ing of existing recordings. Allows regular record-

ing.

If you want to change the disc format, everything

recorded on the disc will be erased.

•

DVD+R: Prevents editing or erasing of existing

recordings. Allows regular recording.

DVD-RW (VR mode)/DVD-RAM: Prevents

editing, erasing, and regular recording.

Finalize

Finalizing ‘fixes’ the recordings in place so that the

disc can be played on a regular DVD player or com-

puter equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. This is accessed by pressing

MENU/LIST or TITLE.

Notes:

•

Disc Protect is not compatible with DVD-RW discs in

Video mode or DVD-R discs.

•

If you need to unlock a disc to make edits, select [OFF].

Caution:

AutoPlay

Once you have finalized a DVD-R and DVD+R (DL)

disc, you cannot edit or record anything else on that

disc except DVD+RW. However, you can record and

edit a DVD-RW disc by choosing [Unfinalize] option.

When you load a DVD with AutoPlay turned on, the

Recorder will bypass the Disc menu and trailers and

start playing the movie automatically.

Set [AutoPlay] to [ON] or [OFF].

1. Select the [Finalize] option then press B.

2. Press ENTER while [Finalize] is selected.

Finalize menu appears.

Channel Selection with Channel

List menu

TV Viewing

Channel Selection

You can select a channel as shown below.

Number and – (dash) buttons

Use Number (0-9) and – (dash) buttons to select a

channel directly.

FAV. CH +/- button

Press FAV +/– to scroll through your favorite chan-

nels. (favorite channel shows heart (♥) icon.)

Note:

Displaying Channel List and Changing

Channel

To set a favorite channel, use [Channel Edit] option in

the Setup menu. (See page 21.)

1. Press HOME and the Home menu appears.

CH +/– buttons

Use CH +/– on the Remote Control or CH V/v on the

front panel to cycle the recorder through the channels

in memory.

2. Select [TV] > [Channel List] and press ENTER.

The channel list menu will appear.

3. Select your desired channel using the V / v and

press ENTER to change the channel.

Switching Channel List

Four types of channel lists are provided for easy and

quick channel searching. You can switch the channel

lists to TV (CATV), DTV (CADTV), Favorite or ALL.

1. Press v to move the highlight position to top of

the channel list.

2. Press b / B to select a [TV (CATV)], [DTV

(CADTV)], [Favorite] or [ALL].

Selected channel list appears.

TV (CATV): Shows all analog TV channels.

DTV (CADTV): Shows all digital TV channels.

Favorite: Shows favorite channels.

(favorite channel shows heart (♥) icon.)

ALL: Shows all analog and digital channels.

Displaying Disc Information

on-screen

General Explanation of

On-Screen Display

You can display various information about the disc

loaded on-screen. Some items can be changed using

the menu.

Some DVDs require specific operation or allow only

limited operation during playback. When this occurs,

is displayed, action prohibited or not available.

1. Press DISPLAY once to show current status.

Example: DVD-RW in VR mode

Displaying Information While

Watching TV

During viewing the TV, press DISPLAY to display/

remove the information displayed on-screen.

Indicates channel number, station name, and

audio signal by the tuner.

2. Press DISPLAY once again to show various

playback information.

The items displayed differ depending on the disc

type or playing status.

Indicates program title, start time, end time,

etc. Details are below. (Digital channel only)

Indicates the disc format, free space,

and elapsed time progress bar.

3. You can select an item by pressing v / V and

change or select the setting by pressing b / B.

For details about each item, see the pages in

parenthesis.

Indicates audio language for

digital channel or output audio

signal for analog channel

•

[Title]: Current title (or track) number/total

number of titles (or tracks) (page 29, 31)

[Chapter]: Current chapter number/total

number of chapters (page 29)

(Stereo, Mono, SAP, etc.).

Indicates current date and time.

•

[Time]: Elapsed playing time (page 31)

[Audio]: Selected audio language (DVD

VIDEO only) or audio channel (page 30)

[Subtitle]: Selected subtitle (page 30)

[Angle]: Selected angle/total number of angles

(page 31)

Note:

You must set the clock on the setup menu to display

the correct start time and end time of the program

while viewing digital channel.

•

Channel Information Icon

•

[Sound]: Selected sound mode (page 31)

(DTV caption icon)

Indicates that the current channel contains the DTV

caption. Press SUBTITLE to select a DTV caption

language.

Note:

If no button is pressed for 10 seconds, the on-screen dis-

play disappears.

TV Aspect

Indicates that the current channel is wide or 4:3 pic-

ture format.

(DTV Multiple Audio Icon)

Indicates that the current channel contains the DTV

multiple audio languages. Press AUDIO to select an

audio language.

Playback

General Playback Features

1. Press OPEN/CLOSE (Z) to open the disc tray. Load your chosen disc in the tray, with the playback side down.

2. Press OPEN/CLOSE (Z) to close the tray. Playback starts automatically. If playback does not start, press

PLAY (N) or Starts playback using HOME menu.

3. To stop the playback, press STOP (x).

The unit records the stopped point, depending on the disc. “Xx” appears on the screen briefly. Press PLAY

(N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“x”

appears on the screen.), the unit will clear the stopped point.

4. Press OPEN/CLOSE (Z) to remove the disc.

Press OPEN/CLOSE (Z) to close disc tray or press POWER (1), the disc tray closes automatically and

unit turns off.

Note:

If parental control is set and the disc is not within the rating settings you must input the password. (See [Rating] on page 23).

Discs

Buttons

Operations

OPEN / CLOSE (Z) Opens or closes the disc tray.

All Discs

DVD ALL

PAUSE (X)

Pause playback.

Press repeatedly to play Frame-by-Frame.

You can also use b / B to step backward and forward

while in Pause mode.

DVD ALL ACD

DVD ALL

SCAN (m / M)

During playback, press repeatedly to select the required

scan speed.

- DVD; 5 steps,

- Audio CD; 3 steps

In Pause mode, press SCAN (m / M) for slow motion

playback (4 steps).

SKIP (. / >)

During playback, press SKIP (> or . )to go to the

next chapter/track or to return to the beginning of the

current chapter/track.

DVD ALL ACD MP3

WMA

Press SKIP . twice briefly to step back to the previous

chapter/track.

•

To go directly to any chapter during DVD playback,

press DISPLAY twice and press v / V to select the

chapter icon. Then, input the chapter number or use

b / B.

•

On an Audio CD, to go directly to any track, enter the

track number using the numbered buttons (0-9) during

playback.

ZOOM

Enlarge the video image.

DVD ALL

(x1 size → x2 size → x4 size → x1 size (normal size))

You can move through the zoomed picture using b B v V

buttons.

DVD Playback Features (Continued)

Buttons

Operations

Discs

DVD +RW

TITLE

If the current DVD title has a menu, the title menu appears

on the screen. Otherwise, the disc menu may appears.

DVD

MENU/LIST

SUBTITLE (

The disc menu appears on the screen.

)

During playback, press SUBTITLE then press b / B

repeatedly to select a desired subtitle language.

DVD ALL

I.SKIP

Press repeatedly during playback to skip forward

30 seconds.

DVD ALL ACD

Karaoke DVD

PLAY MODE

Select a desired play mode while playback.

[A-]: Repeats a sequence between A (Start point) and B

(End point) during playback. Press ENTER at your

chosen end point then the repeat sequence begins.

DVD ALL

[CHAPTER]: Repeats the current chapter.

[TITLE]: Repeats the current title.

DVD ALL Karaoke DVD

ACD -RW

RAM

[ALL]: Repeats the all titles/tracks.

[Track]: Repeats the current track.

[RANDOM]: Random playback

ACD MP3 WMA

Karaoke DVD

MP3 WMA

DVD ALL

[Folder]: Repeats all the tracks on a folder of a disc.

[OFF]: Does not play repeatedly.

•

If you press SKIP (>) once during Repeat Chapter

(Track) playback, the repeat playback cancels.

•

By pressing SKIP (>) during Random playback, the

Recorder selects another title (track) and resumes

Random playback.

DVD

AUDIO (

)

Press AUDIO then press b / B repeatedly to hear a

different audio language, audio track or encoding method.

Note:

Some discs feature both Dolby Digital and DTS sound-

tracks. There is no analog audio output when DTS is

selected. To listen to the DTS soundtrack, connect this

recorder to a DTS decoder via one of the digital outputs.

See page 16 for connection details.

DVD ALL

Press AUDIO then press b / B repeatedly during playback

to hear a different audio channel.

With DVD-RW discs recorded in VR mode that have both

a main and a Bilingual audio channel, you can switch

between Main (L+L), Bilingual (R+R), or a mix of

both (L+R).

Camera Angle DVD

Special Playback Options

If the disc contains scenes recorded at different

camera angles, you can change to a different camera

angle during playback. Press DISPLAY twice then

select the Angle icon during playback. Use b / B to

select a desired angle. Note that the number of the

current angle appears on the display.

If a menu screen is displayed DVD

In some cases, the disc menu might appear instead.

DVD

Use the b B v V buttons to select the title/chapter

you want to view, then press ENTER to start. Press

TITLE or MENU/LIST to return to the menu screen.

Tip:

The Camera Angle icon is displayed on the TV screen when

alternate angles are available.

Moving to another TITLE DVD ALL

When a disc has more than one title, you can move

to another title as follows:

3D Surround DVD ALL

ꢀ

Press DISPLAY twice during playback or in stop

mode then use v / V to select the title icon. Then,

press the appropriate numbered button (0-9) or

b / B to select a title number then press ENTER.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

Time Search DVD ALL

1. Press DISPLAY twice then use v / V to select the

sound icon. Then, use b / B to select [3D SUR.].

To start playing at any chosen time on the disc:

2. To turn off the 3D Surround effect, select

[NORMAL].

1. Press DISPLAY twice during playback. The time

search box shows the elapsed playing time.

2. Press v / V to select the time clock icon and

Last Scene Memory DVD

[-:--:--] appears.

3. Input the required start time in hours, minutes,

and seconds from left to right. If you enter the

This Recorder memorizes last scene from the last

disc that is viewed. The last scene remains in memo-

ry even if you remove the disc from the Recorder or

switch off the Recorder. If you load a disc that has

the scene memorized, the scene is automatically

recalled.

wrong numbers, press b B to move the under

bar (_) to the wrong number. Then enter the

correct numbers.

4. Press ENTER to confirm. Playback starts from the

selected time.

Notes:

•

Settings are stored in memory for use any time.

This Recorder does not memorize settings of a disc if

you switch off the Recorder before commencing to play

it.

Marker Search DVD ALL

To enter a Marker

You can start playback from up to six memorized

points. To enter a marker, press MARKER at the

desired point on the disc. The Marker icon appears

on the TV screen briefly. Repeat to enter up to six

markers.

•

Last Scene Memory function for a previous DVD title is

erased once a different DVD title is played.

To Recall or Clear a Marked Scene

1. During disc playback, press SEARCH.

The marker search menu appears on the screen.

2. Use b/B/v/V to select a marker scene that you

want to recall or clear.

3. Press ENTER and playback starts from the

marked scene. Or, Press CLEAR and use b / B

to select [OK] then press ENTER to delete

marked scene from the list.

4. To remove the Marker Search menu,

press RETURN (O).

Video

-RW

PIP (Picture in Picture) -RW

RAM +RW

-R

DVD

This function enables you to view the stored stations

in sub picture during playback.

On and off

Press PIP to switch on the sub picture, press this

button again to switch it off.

Input mode selection for sub picture

Press INPUT to select the input mode for the sub

picture. Each time this button is pressed, each

input mode for the sub picture is displayed as

shown below.

Tuner

→

AV1

→

AV2

Program selection for sub picture

Use CH (+/-) to change the program when sub pic-

ture’s input is set to tuner. The selected program

number is displayed on the TV screen. You can

view the selected program by pressing STOP (x).

Sub picture position change

Press b / B repeatedly until desired position is

achieved. The sub picture moves clockwise or

counterclockwise.

Music List menu options

Playing an Audio CD or

MP3/WMA files

1. Press v / V to select a track/file or folder on the

[Music List] menu then press ENTER.

The Recorder can play Audio CDs and MP3/WMA

files. Before playing MP3/WMA files, read [MP3/WMA

audio file requirement] on right.

1. Press HOME and the Home menu appears.

2. Select [Music] > [DISC] or [USB] and press

ENTER.

The [Music List] menu appears on the TV screen.

2. Use v / V to select an option, then press ENTER.

• [Play] Start playback the selected track or file.

• [Open] Opens the folder and a list of files in the

folder appears.

• [Random] Start or stop random playback.

Example) Audio CD

Random

1. Press v / V to select a file then press ENTER.

3. Use v/V to select a track or file then press

PLAY (N). Playback starts.

The menu options appear.

You can use variable playback functions. Refer to

pages 29-30.

2. Press v / V to select [Random] option then press

ENTER.

The unit automatically begins random playback

and “RANDOM” appears on the menu screen.

4. To stop playback at any time, press STOP (x).

3. To return to normal playback, select [Random]

option again then press ENTER.

Tips:

•

You can view TV channel or video input source by

pressing RETURN (O). If you want to return to the

[Music List] menu, press MENU/LIST.

Tip:

By pressing SKIP ./> during Random play-

back, the unit selects another track and resumes

Random playback.

Press DISPLAY to view ID3-Tag information for the MP3

file. If ID3-Tag information is not present, [ID3-Tag:

None] will appear. If you select a folder, the number of

subfolders and number of MP3/WMA files in the folder

are displayed. Press DISPLAY again to remove the

information screen.

•

On CDs, DVDs or USB Flash Drive with mixed content

(Audio tracks, MP3/WMA files or JPEG files), you can

select between the [Music List] menu and [Photo List]

menu by pressing TITLE repeatedly.

MP3/WMA audio file requirement

If you are in a file list and want to return to the Folder

File extensions

“.mp3”, “.wma”.

list, use the v/V to highlight

return to the previous menu screen.

and press ENTER to

Sampling frequency:

within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)

Bit rate: within:

8 - 320kbps (MP3), 32 - 192kbps (WMA)

CD-R Format:

ISO 9660 and JOLIET.

DVD R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 1999 (total number of files and folders)

Photo List menu options

1. Use v V b B to select a file then press ENTER.

Viewing a JPEG files

This unit can play JPEG files. Before playing JPEG

recordings, read “Photo file requirement” on page 35.

The menu options appear.

1. Press HOME and the Home menu appears.

2. Select [Photo] > [DISC] or [USB] and press

ENTER.

3. Use v V b B to select a file or folder and press

ENTER.

2. Use v / V to select an option then press ENTER

to confirm your selection.

• [Open] Opens the folder and a list of files in the

folder appears.

• [Full Screen] Shows the selected file as full

screen.

2. Use v / V to select option and press ENTER.

• [Slide Show] Displays Slide Show menu.

Example: When you select a file.

Still picture

3. Use v / V to select [Full Screen] then press

ENTER.

Use PAUSE/STEP (X) while viewing slide show to

pause mode.

The selected image is displayed in full screen.

Skip Images

While viewing a picture, press SKIP (> or .)

once to advance to the next file or return to the

previous file.

Rotate Images

Press ENTER to make this menu appear or disappear.

4. To stop viewing at any time, press STOP (x).

Notes:

Use v / V while viewing a picture to flip the picture

clockwise or counterclockwise.

•

If the

icon displays in the [Photo List] menu, it

means you cannot see those JPEG files.

•

You can view TV channel or video input source by

pressing RETURN (O). If you want to return to the

[Photo List] menu, press MENU/LIST.

•

If you are in a file list and want to return to the Folder

list, use the v/V to highlight

and press ENTER to

return to the previous menu screen.

On CDs, DVDs or USB Flash Drive with mixed content

(Audio tracks, MP3/WMA files or JPEG files), you can

select between the [Music List] menu and [Photo List]

menu by pressing TITLE repeatedly.

View Slide Shows

Photo file requirement

File extensions

“.jpg”

1. Select [Slide Show] option on the [Photo List]

menu.

2. Press ENTER.

Photo size:

Less than 4MB recommended

CD-R Format:

ISO 9660 and JOLIET.

DVD R/RW Format:

ISO 9660 (UDF Bridge format)

Maximum Files/Disc:

Less than 1999 (total number of files and folders)

3. Use b / B / v / V to set the options.

Notes on JPEG file

ꢀ Progressive and lossless compression JPEG

image files are not supported.

ꢀ Depending on the size and number of the JPEG

files, it may take several minutes to read the con-

tents of the media.

[Object] option:

• [Selected] Views slide show only selected

files.

• [All] Views slide show all files.

[Speed] option:

Sets the Slide Show speed to

[Normal], [Slow], or [Fast].

4. Select the [Start] option then press ENTER to

start the Slide Show.

5. Press STOP (x) to stop the Slide Show and

returns to the [Photo List] menu.

Tips:

•

Selecting multiple files

1. Press MARKER.

A check mark appears on the file. Press MARKER

again to cancel the marked file.

2. Repeat step 1 to mark additional file.

•

Use the CLEAR button to select all files, or cancel all

marked files.

•

The displayed times for recording and time

remaining may not always add up to exactly the

length of the disc.

Recording

•

The recording time available may decrease if you

heavily edit a disc.

About DVD recording

Notes:

If using a DVD-RW disc, make sure you change

the recording format (Video mode or VR mode)

before you record anything on the disc. See page

26 (Initialize) for how to do this.

•

This Recorder cannot record CD-R or CD-RW

discs.

•

Fingerprints and small scratches on a disc can

affect playback and/or recording performance.

Please take proper care of your discs.

•

When using a DVD-R or DVD+R disc, you can

keep recording until the disc is full, or until you

finalize the disc. Before you start a recording

session, check the amount of recording time left

on the disc.

•

The company does not hold any responsibility to

compensate the contents which should have

been recorded, and any losses or damages (e.g.

losses of business profit, or business intermis-

sion) that may arise from malfunction of this

recorder (not recording/editing as intended).

•

When using a DVD-RW disc in Video mode,

recording time available will only increase if you

erase the last title recorded on the disc.

The Delete Title option in the Title List (Original)

menu only hides the title, it does not actually

erase the title from the disc and increase the

recording time available (except for the last

recorded title on a DVD-RW disc in Video mode).

Disc types and recording formats, modes,

and settings

This recorder can play many different kinds of DVD

discs: pre-recorded DVD-Video discs, DVD-RW,

DVD-R, DVD+RW, DVD+R(DL) and DVD-RAM discs.

The disc format for DVD-R, DVD+R(DL), DVD+RW

discs is always “Video format”—the same as pre-

recorded DVD-Video discs. This means that once

finalized, you can play a DVD-R, DVD+R (DL), or

DVD+RW in a regular DVD player. The DVD-RAM

disc format is Video Recording (VR) format.

The DVD-RW disc format is Video Recording (VR)

format or Video format. You can change Recording

format, if required. (Reinitializing the disc will erase

the contents of the disc.)

•

Overwrite recording is available using DVD+RW

discs.

When using a DVD+R/RW, the recorder will exe-

cute the Menu-making operation to update the

new title and editing when removing the disc

from the recorder.

•

The recordable time of MLP mode with DVD+R

DL discs is about 11 hours which is similar to sin-

gle layer discs, because the resolution of

DVD+R DL disc is higher than that of single layer

disc.

The recording mode is closely related to the disc for-

mat. If the disc format is Video Recording format,

then the recording mode is VR mode; if the disc for-

mat is Video format, then the recording mode is

Video mode (except for DVD-Video, which is not

recordable, and so does not have a recording mode).

These can be changed as required for each record-

ing and determine the picture quality and how much

space the recording will take up on the disc.

Recording time and picture

quality

There are five preset recording quality modes:

ꢀ XP – Highest quality setting, gives about

1 hour of recording time on a DVD (4.7GB).

ꢀ SP – Default quality, sufficient for most applications,

gives about 2 hours of recording time on a DVD (4.7GB).

ꢀ LP – Slightly lower video quality, gives about 4

hour of recording time on a DVD disc (4.7GB).

ꢀ EP – Low video quality, gives about 6 hour of

recording time on a DVD (4.7GB).

Notes for recording

•

The recording times shown are not exact

because the recorder uses variable bit-rate video

compression. This means that the exact record-

ing time will depend on the material being record-

ed.

ꢀ MLP – The longest recording time with the lowest

video quality, gives you about 11 hours of recording

time on a DVD (4.7GB).

•

When recording a TV broadcast, if the reception

is poor or the picture contains interference, the

recording times may be shorter.

Note:

You may see a fragmented picture during playing

back the contents recorded in EP or MLP mode.

If you record still pictures or audio only, the

recording time may be longer.

Basic Recording from a TV

Instant Timer Recording

Follow the instructions below to record a TV program.

Recording starts immediately and continues until the

disc is full or you stop the recording.

Instant Timer Recording allows you to make a

recording easily of a preset length without using the

program timer.

1. Follow steps 1-4 as shown left (Basic Recording

from a TV).

2. Press z REC repeatedly to select the recording

time length. Recording starts after the first press.

Each subsequent press increases the recording

time by 10 minutes.

1. Switch on the Recorder and load a recordable

disc. Also make sure that the TV input is set to

this recorder.

2. Set a recording mode as necessary by pressing

REC MODE repeatedly.

DVD: XP, SP, LP, EP, MLP

3. Select the TV channel to record.

Checking the Recording Time

4. Use AUDIO to select the audio channel for analog

channel or audio language for digital channel to

record.

Press z REC or DISPLAY once to check the record-

ing time. The recalled setting will automatically return

to the TV screen for a moment.

Also, remaining time of recording is shown in the dis-

play window.

The table below shows what will be recorded on

the different settings for different types of analog

broadcast. The last column (Monitor Audio) shows

what you’ll hear as it is recording.

To Extend the Recording Time

TV Broadcast Selected

Audio

Broadcast Audio Monitor

L Ch

MONO MONO

SAP

R Ch

Audio

MONO

STEREO

MONO

SAP

The recording time can be extended anytime by

pressing z REC.

Each subsequent press increases the recording time

MONO

STEREO

MONO

by 10 minutes.

MONO+SAP MONO

SAP

To Pause the Recording

STEREO

+SAP

STEREO

SAP

STEREO

SAP

1. Press PAUSE/STEP (X) to pause the recording.

MONO

MONO MONO

MONO

2. When you want to continue recording, press

If you set the audio channel to SAP, but there is

no SAP channel being broadcast, the main audio

(mono or stereo) will be recorded.

PAUSE/STEP (X) or z REC.

Notes:

•

If you press PAUSE/STEP (X) during the Instant Timer

Recording, it will be canceled.

5. Press z REC once to start recording.

•

The Recorder will automatically power off when the

Instant Timer Recording ends.

The REC indicator lights in the display window.

6. Press STOP (x) to stop recording.

Notes:

•

The maximum numbers of DVD titles are as show

below;

- DVD-R/RW, DVD-RAM: 99

- DVD+R(DL)/RW: 49

•

If the Recorder is powered off during DVD recording, the

recording will not be saved.

4. Enter the necessary information for your timer

recording(s).

Timer Recording

•

b / B (left/right) – Move the cursor left/right

v / V (up/down) – Change the setting at the

current cursor position.

The Timer Recording function allows you to record up

to 16 programs within a period of one month.

1. Press HOME and the Home menu appears.

2. Select [TV] > [Timer Record] and press ENTER.

•

Press RETURN (O) to return to the [Timer

Record List] menu.

5. Press ENTER to save the program.

6. Press RETURN (O) to exit the [Timer Record

List] menu.

7. Make sure that you load a recordable disc for

DVD recording and press POWER to switch your

unit to Standby.

Notes:

•

You must insert a recordable disc.

•

The Timer indicator lights on the front panel

display.

3. Select [NEW] and press ENTER.

The Timer Record menu will appear.

•

The Recorder will record the audio according to

the current TV tuner setting. Use AUDIO to select

the audio channel for analog channel to record

before switching the Recorder to Standby mode.

For digital TV recording with multiple audio lan-

guages, set audio language from the [DTV Audio]

in sub-menu of the Setup menu (see page 22).

•

The Recorder will automatically power off when

the Timer Recording ends.

•

[Ch.] – Choose a channel that memorized in

this Recorder, or one of the external inputs

from which to record (AV1 or AV2).

There is a short delay when a timer recording fin-

ishes to confirm the recorded program. If two

timer recordings are set to record sequentially

(one right after the other), the very beginning of

the later program may not be recorded.

[Date] – Choose a date up to 1 month in

advance, or select a daily or weekly program.

•

[Start Time] – Set the recording start time.

[End Time] – Set the recording end time.

[Mode] – Choose a record mode.

•

You must press POWER to stop the Timer

Recording.

XP, SP, LP, EP, MLP or AT (Auto)

AT(Auto) mode determines how much time is avail-

able on the disc and switches record mode, if nec-

essary, to complete recording the program.

Checking Timer Recording Details

Programming can be checked whenever the

Recorder is turned on.

1. Press HOME and the Home menu appears.

2. Select [TV] > [Timer Record] and press ENTER.

3. Use v / V to select a program.

•

[Set-Top Channel] – Choose a channel or

[OFF] for AV1 input timer recording.

For AV1 input timer recording using

[Set-Top Channel] option, refer to page 39.

4. Press ENTER to edit the selected program.

Timer Record menu appears.

Canceling a Timer Recording

You can clear a timer setting anytime before the

recording actually starts.

•

Use v / V to select a program you want to erase

on the [Timer Recorder List] menu, then press

CLEAR and select [OK] then press ENTER.

10. Press ENTER to save the program.

AV1 Timer Recording using

Set-Top Channel option

11. Press RETURN (O) to exit the [Timer Record

List] menu.

12. Make sure that you load a recordable disc for

DVD recording and press POWER to switch your

unit to Standby.

1. Connect a Set-Top Box as shown on page 18.

2. Make the necessary settings for the connection

as shown on page 25.

Notes:

3. Important, for the Recorder to record programs

received through the Set-Top Box, the Set-Top

box must remain turned on at all times.

•

You must insert a recordable disc.

•

The Timer indicator lights on the front panel

display.

4. Select [TV] > [Timer Record] and press ENTER.

•

The Recorder will automatically power off when

the Timer Recording ends.

There is a short delay when a timer recording fin-

ishes to confirm the recorded program. If two

timer recordings are set to record sequentially

(one right after the other), the very beginning of

the later program may not be recorded.

•

You must press POWER to stop the Timer

Recording.

Checking Timer Recording Details

5. Select [NEW] and press ENTER.

The Timer Record menu will appear.

Programming can be checked whenever the

Recorder is turned on.

1. Press HOME and the Home menu appears.

2. Select [TV] > [Timer Record] and press ENTER.

3. Use v / V to select a program.

6. Enter the necessary information for your timer

recording(s).

•

b / B (left/right) – Move the cursor left/right

v / V (up/down) – Change the setting at the

current cursor position.

4. Press ENTER to edit the selected program.

•

Press RETURN (O) to exit the Timer Record

menu.

Timer Record menu appears.

7. Set the [Ch.] option to [AV1].

Canceling a Timer Recording

You can clear a timer setting anytime before the

recording actually starts.

•

Use v / V to select a program you want to erase

on the Timer Recorder List, then press CLEAR

and select [OK] than press ENTER.

8. Set the [Date], [Start Time], [End Time], and

[Mode] options according to previous page.

If you fail the AV1 Timer Recording

•

Make sure IR Control Cable connection. (page 18)

9. Set the [Set-Top Channel] option.

Set the [Set-Top Box Edit] options again then proceed

the [Test] option. (page 25)

•

Select a channel using number or v / V but-

tons, the Recorder sends commands to

change the channel of the connected Set-Top

Box through the IR control cable.

•

If IR control is not activated even though you set again,

the Recorder may not control your Set-Top Box accord-

ing to the device’s maker or status.

•

Select [OFF] using CLEAR button, if you do

not need the changing the channel of the Set-

Top Box.

Confirm recommended Set-Top Box on page 18 or

contact your Set-Top Box provider.

Timer Recording Troubleshooting

Playing while you are

RAM

Even though the timer is set, the recorder will not

record when:

recording

•

There is no disc loaded.

You can start play from the beginning of the title while

continuing to record it.

A non-recordable disc is loaded.

Disc Protect is set to [ON] in the Disc menu

(see page 26).

While recording (in DVD mode)

1. Press PLAY (N).

•

There are already 99 titles (DVD-RW, DVD-R,

DVD-RAM), 49 titles (DVD+RW, DVD+R(DL))

recorded on the disc.

Start play of the title you are recording.

2. Press STOP (x) to return to the current recording

screen.

You cannot enter a timer program when:

•

A recording is already underway.

The time you’re trying to set has already

passed.

•

There are already 16 timer programs set.

If two or more timer programs overlap:

•

The earlier program takes priority.

When the earlier program finishes, the later

program starts.

•

If two programs are set to start at exactly the

same time, the program entered first takes

priority.

If the disc is damaged, the recording may not

complete successfully. In this case even though the

Check field shows [Rec. OK], it may not be.

1. Press TIMESHIFT.

The PIP(Picture-In-Picture) window appears on

the screen as shown below. What is currently

being recorded appears as a PIP and you will

hear the playback audio.

To record one TV program while

watching another

• You can switch between PIP window and Main win-

dow screen by pressing TIMESHIFT.

1. Press TV/DVD to select the TV mode during

recording. The TV indicator appears.

2. Using the TV, select the channel to be viewed.

2. Press STOP (x) to return to the current recording

screen.

Notes:

•

Play cannot be started until at least 30 seconds after

recording starts. (MLP mode: after 1 minute)

•

This function can operate the DVD-RAM disc only.

Recording from External

Components

You can record from an external component, such as

a camcorder or VCR, connected to any of the

Recorder’s external inputs.

1. Make sure that the component you want to record

from is connected properly to the Recorder. See

page 17.

2. Press INPUT repeatedly to select the external

input to record from.

•

AV1: Audio/Video Input mounted on back

panel.

AV2: Audio/Video Input mounted on front

panel.

DV: DV Input mounted on front panel.

3. Load a recordable disc.

4. Set a recording mode as necessary by pressing

REC MODE repeatedly. (XP, SP, LP, EP or MLP)

5. Press z REC once to start recording.

The REC indicator lights in the display window.

6. Press STOP (x) to stop recording.

Notes:

•

Check that the Audio In settings DV Record Audio

are as you want them. See page 24.

•

If your source is copy-protected using

CopyGuard, you will not be able to record it using

this recorder. See Copyright on page 8 for more

details.

•

Recording continues until you press STOP (x) or

the disc is full.

To record for a fixed length of time, see [Instant

Timer Recording] on page 37.

1. Make sure your digital camcorder is connected to

the front panel DV IN jack. See page 17.

Recording from DV Input

2. Press INPUT repeatedly to select the DV input.

Before DV dubbing

3. Find the place on the camcorder tape that you

want to the recording to start from.

You can connect a DV-equipped camcorder to this

recorder using a single DV cable for input and output

of audio, video, data and control signals.

ꢀ This recorder is only compatible with DV-format

(DVC-SD, DV25) camcorders. Digital satellite

tuners and Digital VHS video recorders are not

compatible.

ꢀ You cannot connect more than one DV camcorder

at a time to this recorder.

ꢀ You cannot control this recorder from external

equipment connected via the DV IN jack (including

two recorders).

For best results, pause playback at the point from

which you want to record.

ꢀ Depending on your camcorder, you can use

this recorder’s remote to control the camcorder

using the STOP, PLAY, SCAN and PAUSE

functions.

4. Press z REC once to start recording.

ꢀ Recording is automatically stopped if the

recorder detects no signal.

ꢀ You can pause or stop the recording by press-

ing PAUSE/STEP (X) or STOP (x).

You cannot control the camcorder from this

Remote Control during recording.

ꢀ In Video mode, the final frame of the recording

may remain displayed on screen for a while

after recording stops.

ꢀ It may not always be possible to control the con-

nected camcorder via the DV IN jack.

ꢀ Digital camcorders can usually record audio as

stereo 16-bit/48kHz, or twin stereo tracks of 12-

bit/32kHz. This recorder can only record one stereo

audio track. Set [DV Record Audio] option to Audio

1 or Audio 2 as required (see page 24).

ꢀ Audio input to the DV IN jack should be 32 or

48kHz (not 44.1kHz).

Troubleshooting

ꢀ Picture disturbance on the recording may occur if

the source component pauses playback or plays an

unrecorded section of tape, or if the power fails in

the source component, or the DV cable becomes

disconnected.

If you cannot get a picture and/or audio through the

DV IN jack, check the bullet points:

ꢀ Make sure the DV cable is properly connected.

ꢀ Try switching off the connected equipment then

switch back on.

ꢀ Try switching the audio input.

Recording from a Digital Camcorder

Note:

You can record from a digital camcorder connected to

the DV IN jack on the front panel of this recorder.

Using the recorder’s remote, you can control both the

camcorder and this recorder.

Depending on the connected camcorder, you may not

be able to control it using the Remote Control supplied

with this recorder.

Before recording, make sure that the audio input for

the DV IN jack is set up (see page 24).

Tips:

•

The source signal must be DVC-SD format.

Some camcorders cannot be controlled using this

recorder’s remote.

•

If you connect a second recorder using a DV

cable, you cannot control the second DVD from

this one.

•

You cannot control this unit remotely from a com-

ponent connected to the DV IN jack.

You cannot record date and time information from

a DV cassette.

Disconnecting the DV cable while recording a

contents of the connected digital camcorder may

result in malfunction.

Editing

Title List and Chapter List

Menu Overview

1 2

6 7

Using the Title List menu you can edit video content.

The editing features available in the Title List menu

depend on whether you are editing video on DVD,

and whether you’re editing Original content, or a

Playlist.

There are two ways to edit VR mode DVD-RW discs.

You can directly edit the Original content of the disc,

or you can create and edit a Playlist. The Playlist

doesn’t actually change any of the content on the

disc, but just controls how the content is played back.

1. Press MENU/LIST to display the TITLE LIST

menu.

1. Menu options: To display menu option, select a

Playback should be stopped when you do this.

title or chapter then press ENTER. The options

displayed differ depending on the disc type.

• [Play] Start playback of the selected title or chapter.

The hidden titles and chapters on the DVD+R/RW

cannot be play back.

ꢀ When selecting titles, use the v / V buttons to

display the previous/next page if there are more

than six titles.

ꢀ If you are editing a VR mode disc, press

MENU/LIST to switch between Original and

Playlist menu.

• [Search]

- [Chapter] ; Displays Chapter List of the Title.

- [Time] ; Search time for you want start point

of the title. (page 47)

ꢀ On the left side of the screen are the menu

options. The main part of the screen shows

thumbnails of the titles (or chapter) on the DVD.

You can change these thumbnails using the

THUMBNAIL button. (see [Changing Title

Thumbnails] on page 44.)

• [Delete] Deletes the title or chapter. (page 46)

• [Move] Moves chapter position on [Chapter List -

Playlist] menu (page 48).

• [Protect] Protects accidental recording, editing or

deleting of the title.(page 48)

• [Edit] Edits or Deletes a part of the title.

- [Title Name] Edits the title name. (page 47).

- [Delete Part] Deletes a part of the Title (page 46).

- [Divide] Divides a title into two (page 49).

- [Hide (Show)] Hides (or Shows) the selected title or

chapter. (page 48)

• [Playlist Add] Adds the title or chapter to the Playlist.

(page 45)

• [Title] Displays Title List of the chapter.

• [Combine] Combines two titles or chapters into one

(page 49).

ꢀ Press DISPLAY to display the information of

selected title on the Title List menu.

ꢀ After selecting a title or chapter on the Title List

or Chapter List menu, then press ENTER. The

menu options on the left side of the menu. Use

v / V to select a option then press ENTER to

confirm your selection.

• [Full Play] Starts playback of the selected title includ-

ing the hidden chapters.

2. To exit the TITLE LIST menu, press

RETURN (O) repeatedly.

2. Current media.

3. Indicates the record mode, free space, and

elapsed time progress bar.

4. Currently selected title.

5. Thumbnail.

6. Shows the selected title number and total number

of titles.

7. Shows the title name, recorded date, and record-

ing length.

Adding Chapter Markers

VR Mode: Original and

Playlist Editing

-RW

+RW

RAM

You can create chapters within a title by inserting

chapter marks at the desired points.

Titles, Chapters and Parts

Titles in the disc’s original content contain one or

more chapters. When you insert a disc’s title into the

Playlist, all the chapters within that title also appear.

In other words, chapters in the Playlist behave exact-

ly as chapters on a DVD-Video disc do. Parts are

sections of Original or Playlist titles. From the Original

and Playlist menu you can add or delete parts.

Adding a chapter or title to the Playlist creates a new

title made up of a section (ie., chapter) of an Original

title. Deleting a part removes part of a title from the

Original or Playlist menu.

Note:

Chapter markers are inserted at regular intervals

automatically. You can change this interval from the

Initial Setup menu (see [Auto Chapter] on page 24).

During recording or playing back, at the point you

want to start a new chapter, press CHP. ADD.

A chapter marker icon appears on the TV screen.

Changing the Title Thumbnails

Caution:

-RW

+RW

RAM

ꢀ When editing using the Delete, Add and Move func-

tions, the start and end frames may not be exactly

as set in the start and end point display.

ꢀ During Playlist playback, you may notice a momen-

tary pause between edits. This is not a malfunction.

Each title displayed in the Title List menu is repre-

sented by a thumbnail picture taken from the start of

that title or chapter.

If you prefer, select a different still picture from within

a title.

Press THUMBNAIL to make the currently displayed

picture the one that appears in the Title List menu.

The still picture that you choose appears in both the

Original or Playlist menu.

Is editing a DVD like editing a video tape?

No. When you edit a video tape you need one video

deck to play the original tape and another to record

the edits. With DVD, you edit by making a ‘Playlist’ of

what to play and when to play it. On playback, the

Recorder plays the disc according to the Playlist.

-RW

RAM

Tip

You can also change the thumbnail picture of the title

on the Chapter List menu. Select a chapter on the

Chapter List menu then press THUMBNAIL. The

thumbnail picture of the title that includes the chapter

is changed.

About word ‘Original’ and ‘Playlist’

-RW

RAM

Throughout this manual, you will often see the words

Original and Playlist to refer to the actual content and

the edited version.

ꢀ Original: content refers to what’s actually recorded

on the disc.

ꢀ Playlist: content refers to the edited version of the

disc — how the Original content is to be played.

Making a New Playlist

Adding Additional Title /

-RW

RAM

Chapters to the Playlist

-RW

RAM

Use this function to add an Original title or chapter to

the Playlist. When you do this, the whole title or

chapter are put into the Playlist (you can delete bits

you don’t need later - see [Deleting an Original or

Playlist title/chapter] on page 46).

You can add an Original title or chapter to add to a

Playlist title even if it is already registered.

1. Choose a title or chapter on the [TITLE LIST-

Original] menu or [Chapter List-Original] menu to

put into the Playlist, then press ENTER.

The menu options appears on the left side of the

screen.

The title appears in the Playlist complete with the

chapter markers that appear in the Original. However,

if you add more chapter markers to the Original later,

these are not automatically copied over into the

Playlist title.

2. Use v / V to select [Playlist Add] from menu

options then press B.

You can add up to 999 chapters to one disc.

1. Choose a title or chapter on the [TITLE LIST-

Original] menu or [Chapter List-Original] menu to

put into the Playlist, then press ENTER.

The menu options appears on the left side of the

menu.

2. Use v / V to select [Playlist Add] option then

press B.

3. Choose a Title List-Playlist that is already regis-

tered to insert a title or chapter, then press

ENTER.

4. Repeat steps 1-3 to add additional title or chapter

on the Playlist.

You can view the added chapters on the [Chapter

List-Playlist] menu.

3. Select [New Playlist] then press ENTER.

The new title appears in the updated Playlist. All

chapters of the title are added to the Playlist.

5. Press RETURN (O) to exit, or MENU/LIST to go

back to the [Title List-Original] menu.

-RW

RAM

Deleting an Original or

Playlist Title/Chapter

Deleting a Part

You can delete a part which you do not want in the

title.

When you erase a title or chapter from the Playlist

menu, you only remove it from the Playlist; the

title/chapter remains in the Original menu.

1. Use b / B / v / V to choose a title you want to

delete on the Title List menu then press ENTER.

The options appears on the left side of the menu.

If you choose to delete a title or chapter from the

Original (title/chapter) menu, the title or chapter is

actually deleted from the disc and the remaining time

available for recording increases. Titles/chapters

deleted from the Original are also removed from the

Playlist.

2. Select [Edit] > [Delete Part] option then press

ENTER.

[Edit] menu appears on the TV screen.

Example: Edit (Delete Part) (DVD-VR)

Note:

It may not be possible to delete chapters that are less

than 3 seconds long.

1. Use b / B / v / V to choose a chapter or title you

want to delete on the [TITLE LIST] or [Chapter

List] menu then press ENTER.

The menu options appears on the left side of the

screen.

2. Select [Delete] option from the options on the

menu.

3. Use play, pause step, search and slow-motion to

find the starting point.

Example: Title List (DVD-VR)

4. Press ENTER at the starting point of the section

you want to delete.

[End Point] icon is highlighted.

The part is indicated on the Progress Bar.

5. Use play, pause step, search and slow-motion to

find the ending point.

6. Press ENTER at the ending point of the section

you want to delete.

You can cancel the selected point, use v / V to

select [Cancel] icon then press ENTER.

3. Press ENTER to confirm.

7. If you finish to edit, select [Done] icon then press

ENTER.

The confirm message for deleting will appear.

4. Use b / B to select [OK] then press ENTER.

The selected chapter or title is deleted.

After pressing ENTER, the new, updated menu is

displayed.

The confirm message for deleting will appear.

Use b / B to select [OK] then press ENTER.

The selected part is deleted from the title and Title

List menu appears.

5. Repeat steps 1 - 4 to continue to delete from the

menu.

Notes:

•

6. Press RETURN (O) repeatedly to exit the menu.

It may not be possible to delete parts that are less than

5 seconds long.

Notes:

•

If you select [Cancel] then press ENTER, the Recorder

will go to previous option and into Pause mode.

•

When DVD+RW recording, the deleted title’s

name is changed to [Deleted Title].

If more than two titles are repeatedly deleted, the

titles are combined into one.

When you are deleting a title or chapter, only the

last one on DVD+R/RW increases remaining

recording time.

Notes:

Naming a Title

You can name the titles.

•

Names can be up to 32 characters long.

•

For discs formatted on a different recorder, you

will see only a limited character set.

1. Choose the title you want to name on the Title List

menu, then press ENTER.

•

When recording on DVD-R, DVD-RW or DVD+R

discs, the entered name is displayed on the DVD

player only after finalization.

The menu options appears on the left side of the

menu.

2. Use v/V to select [Edit] > [Title Name] option then

press ENTER.

Time Search

Keyboard menu appears.

You can select start point of the title.

1. Use b / B / v / V to choose a title on the TITLE

LIST menu then press ENTER.

The options appears on the left side of the menu.

2. Select [Search] > [Time] option then press

ENTER.

[Time] menu appears on the TV screen.

3. Enter a name for the title. Use b / B / v / V to

select a character then press ENTER to confirm

your selection.

•

Language: Selects a keyboard type.

Space: Inserts a space at the cursor position.

Delete: Deletes the character to the left of the

cursor position.

•

b / B: Moves the cursor left or right.

OK: Confirms the name you have entered.

End time

Cancel: Deletes all characters and exits the

Keyboard menu.

Current picture

Selected time

Remote Control buttons for entering a name

•

PLAY (N): Inserts a space at the cursor posi-

tion.

Selected point

Start time

PAUSE/STEP (X): Deletes the character to

the right of the cursor position.

3. Use b / B to find the point you want to start.

The point increase 1 minute step.

If you press and hold b / B then the point

increase 5 minute step.

SKIP (. / >): Moves the cursor left or

right.

STOP (x), CLEAR: Deletes the character to

the left of the cursor position.

4. Press ENTER to start selected point.

0-9: Enters the character corresponding to the

selected column.

MENU/LIST, DISPLAY: Switches the keyboard

type.

4. Choose [OK] then press ENTER to fix the name

and return to the previous menu screen.

5. Press RETURN (O) repeatedly to exit the menu.

Tip:

Moving a Playlist Chapter

If you select a hidden chapter or title on the TITLE

LIST or Chapter List menu, you can ‘show’ it by

choosing [Show] option on the menu. After doing that,

you are able to see the chapter or title.

-RW

RAM

Use this function to re-arrange the playing order of

Playlist chapters on the Chapter List-Playlist menu.

Note:

This function is not available if there is only one

chapter.

Protect a Title

-RW

+RW

RAM

1. Select a chapter on the Chapter List-Playlist

menu.

Use this function to protect against accidental record-

ing, editing or deleting of the title.

2. Press ENTER.

The menu options appears on the left side of the

menu.

1. Press MENU/LIST to display the [TITLE LIST]

menu.

3. Use v / V to select [Move] option from Playlist

2. Use v V b B to choose a title you want to protect

then press ENTER.

options then press ENTER.

Options appear on the left side of the screen.

3. Select [Protect] from the options.

Example: Title List (DVD-VR)

4. Use b / B / v / V to choose the place you want to

move the chapter then press ENTER.

After pressing ENTER, the updated menu is

displayed.

4. Press ENTER to confirm.

The lock mark will appears on the title’s

thumbnail.

Hide a Chapter/Title

+RW

Tip:

If you select a title that has already been protected

on the Title List menu, you can ‘unprotect’ it by

choosing [Unprotect] option from the Title List menu

options. After doing that, you can edit and delete the

title.

You can skip playing chapters or titles without delet-

ing from the disc.

1. Use v V b B to choose a chapter or title you

want to hide on the [TITLE LIST] or [Chapter List]

menu, then press ENTER.

Options appear on the left side of the screen.

2. Select [Edit] > [Hide] option.

Example: Title List (DVD+RW)

3. Press ENTER to confirm.

The chapter’s or title’s thumbnail will dim.

Divide One Title Into Two

+RW

Combining Two Chapters

Into One

-RW

+RW

RAM

Use this function to combine two adjacent chapters

into one.

Use this command to split a title up into two new

titles.

1. On the Chapter List menu, select the second

chapter of the two chapters you want to combine

then press ENTER

1. On the Title List menu, select a title you want to

divide then press ENTER.

The menu options appears on the left side of the

screen.

The menu options appears on the left side of the

screen.

2. Select [Edit] > [Divide] option.

Example: Title List (DVD+RW)

2. Use v / V to select [Combine] option.

The combine indicator appears between the two

chapters you want to combine.

Example: Title List (DVD-VR)

3. Press ENTER.

[Edit (Divide)] menu appears.

Current picture

3. Press ENTER to combine the chapters.

4. Repeat steps 1 - 3 to continue to combine from

the menu.

The first title’s

thumbnail

5. Press RETURN (O) repeatedly to exit the menu.

Notes:

The second

This function cannot operate listed as below;

title’s thumbnail

•

If there is only one chapter within the title.

If you select first chapter.

If two chapters created by erasing a part from an

original title.

4. Use play, pause step, search and slow-motion to

find the point you want to divide the title.

•

If two chapters created from different titles.

If two chapters created by moving an order from an

original title.

5. Select [Divide] option then press ENTER at the

point.

To reset the point, select [Cancel] option then

press ENTER. Repeat from step 4.

6. Choose [Done] option then press ENTER to fix

the dividing point.

The title is divided into two new titles. It take up to

4 minutes to divide.

Note:

The diving point may not be selected if the point is

less than 3 seconds long.

2. On DVD mode, press TITLE in Play mode or Stop

mode.

Overwriting Recording +RW

Title List menu will appear as shown below.

To overwrite a new video recording on a previously

recorded title, follow these steps. This feature is not

available for DVD+Rs, that always record at the end

of the Disc.

1. Select input source you want to record

(TV channel, AV1-2).

2. Press MENU/LIST to display the TITLE LIST

menu.

3. To play back a title, select the title you want then

press ENTER or PLAY (N).

Tip:

You can remove the Title List menu by pressing

STOP (x).

3. Use v V b B to choose a title you want to

overwrite.

Playing Your Recordings on

Other DVD Players

(Finalizing a Disc)

4. Press z REC to start overwrite recording.

Overwrite recording starts from the start point of

the title.

5. Press STOP (x) to stop the overwrite recording.

The new title is created and updated menu is dis-

played.

Most regular DVD players can play finalized discs

recorded in Video mode, finalized DVD+R or

DVD+RWs. A small number of players can also play

DVD-RW discs recorded in VR mode, finalized or not.

Check the manual that came with the other player to

check what formats of discs it will play.

Notes:

•

This function is not available for a protected title.

•

If you overwrite the longer recording than the

current title on the fully recorded disc, the

next title is overwritten.

Finalizing ‘fixes’ the recordings and editings in place

so that the disc can be played on a regular DVD play-

er or computer equipped with a suitable DVD-ROM

drive.

•

If next title is protected, the overwriting stops

at the starting point of the title.

Finalizing a Video mode disc creates a menu screen

for navigating the disc. The menu can be accessed

by pressing MENU/LIST or TITLE.

To finalize a disc, refer to [Finalize] on page 26.

Viewing Title List menu

displayed on other DVD

Recorders or Players

Notes:

•

Unfinalized DVD+RW is playable on regular DVD

players.

•

The edited contents of a DVD+RW (DL) disc is

compatible on regular DVD players only after

finalization.

+RW

You can view the Title List menu displayed on the

other DVD player that is capable of playing DVD+RW

or DVD+R discs.

•

Any edited contents of the DVD+R disc are not

compatible on regular DVD players.

(Hide, chapter combine, added chapter mark, etc.)

1. Insert DVD+R or DVD+RW disc recorded already.

How long finalization takes depends on the type

of disc, how much is recorded on the disc, and

the number of titles on the disc.

DVD+R DL disc can take up to 30 minutes to

finalize.

Reference

Controlling other TVs with the

Multi-brand Remote Control

Controlling Your TV with the

Supplied Multi-brand Remote

Control

You can control the sound level, input source, and

power switch of non-LG TVs as well. If your TV is list-

ed in the table below, set the appropriate manufactur-

er code.

You can control the sound level, input source, and

power switch of your LG TV with the supplied

Multi-brand Remote Control.

1. While holding down TV POWER button, press the

number buttons to select the manufacturer code

for your TV (Refer to table on the right column).

You can control your TV using the buttons below.

2. Release TV POWER button.

Code numbers of controllable TVs

If more than one code number is listed, try entering

them one at a time until you find the one that works

with your TV.

TV Control

Buttons

Manufacturer

LG / GoldStar

Zenith

Code Number

1 (Default), 2

1, 3, 4

6, 7

8, 9

Samsung

Sony

Hitachi

By pressing

POWER

You can

Turn the TV on or off.

Notes:

•

Depending on your TV, some or all buttons may not

INPUT

Switch the TV’s input source

between the TV and other input

sources.

function on the TV, even after entering the correct

manufacturer code.

•

If you enter a new code number, the code number previ-

ously entered will be erased.

CH +/–

Scans up or down through

memorized channels.

When you replace the batteries of the remote, the code

number you have set may be reset to the default set-

ting. Set the appropriate code number again.

VOL +/–

Adjust the volume of the TV.

Note:

Depending on the unit being connected, you may not be

able to control your TV using some of the buttons.

Language Code List

Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.

Language

Abkhazian

Afar

Afrikaans

Albanian

Ameharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali; Bangla

Bhutani

Bihari

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Code

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Language

Fiji

Finnish

French

Frisian

Galician

Georgian

German

Greek

Greenlandic

Guarani

Gujarati

Hausa

Code

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Language

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Code

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

Language

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Code

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Marathi

Moldavian

Mongolian

Nauru

Nepali

Norwegian

Oriya

Panjabi

Pashto, Pushto

Persian

Polish

Portuguese

Quechua

Rhaeto-Romance 8277

Rumanian

Russian

Samoan

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Shona

Tamil

Tatar

Hebrew

Hindi

Telugu

Thai

Tibetan

Tigrinya

Tonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

8279

8285

8377

8365

7168

8382

8372

8378

8368

Uzbek

Vietnamese

Volapük

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Danish

Dutch

English

Esperanto

Estonian

Faroese

Korean

Kurdish

Laothian

Latin

Latvian, Lettish

Sindhi

Area Code List

Choose a area code from this list.

Area

Code

Area

Ethiopia

Fiji

Finland

France

Germany

Great Britain

Greece

Greenland

Code

Area

Code

Area

Saudi Arabia

Senegal

Singapore

Slovak Republic

Slovenia

South Africa

South Korea

Spain

Sri Lanka

Sweden

Switzerland

Taiwan

Thailand

Turkey

Code

Afghanistan

Argentina

Australia

Austria

Belgium

Bhutan

Bolivia

Brazil

Cambodia

Canada

Chile

China

Colombia

Congo

Costa Rica

Croatia

Czech Republic

Denmark

Ecuador

Egypt

Malaysia

Maldives

Mexico

Monaco

Mongolia

Morocco

Nepal

Netherlands

Netherlands Antilles AN

New Zealand

Nigeria

Norway

Heard and McDonald Islands HM

Hong Kong

Hungary

India

Indonesia

Israel

Italy

Jamaica

Japan

Kenya

Kuwait

Libya

Luxembourg

Oman

Pakistan

Panama

Paraguay

Philippines

Poland

Portugal

Romania

Russian Federation RU

Uganda

Ukraine

United States

Uruguay

Uzbekistan

Vietnam

El Salvador

Zimbabwe

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

ꢀThe power cord is disconnected.

ꢀPlug the power cord into the wall out-

let securely.

Abnormal or no picture.

ꢀThe TV is not set to receive Recorder

signal output.

ꢀSelect the appropriate video input

mode on the TV so the picture from

the Recorder appears on the TV

screen.

ꢀConnect the video cable into the jacks

ꢀThe video cable is not connected

securely.

ꢀ Check TV capability.

ꢀ Unit output setting and TV resolution

capabilities mismatch.

ꢀ Check mode of connections

(eg. S-Video, Components etc.).

ꢀ Check unit Resolution setting accord-

ing to TV capability and mode of con-

nection.

ꢀCheck the connection.

ꢀWrong connection.

ꢀSelect the correct input mode of the

audio receiver so you can listen to the

sound from the Recorder.

ꢀThe equipment connected with the

audio cable is not set to receive

Recorder signal output.

No sound.

ꢀConnect the audio cable into the jacks

securely.

ꢀThe audio cables are not connected

securely.

ꢀTurn on the equipment connected with

the audio cable.

ꢀThe power of the equipment connected

with the audio cable is turned off.

ꢀSet the AUDIO options to the correct

position.

ꢀThe AUDIO options are set to the wrong

position.

ꢀChange AUDIO setup to PCM mode.

ꢀIn HDMI mode, audio selection is not

set to PCM.

^ꢀClean the disc.

ꢀThe disc is dirty.

The playback picture is

poor.

^ꢀCheck tuning, carry out tuning again.

ꢀThe TV channels are not tuned in properly.

ꢀYou cannot connect via the Recorder.

Connect the component directly to

your TV.

ꢀThe video signal from the external

component is copy-protected.

Picture from external

input is distorted.

Some channels are

skipped over when

using CH (+/-).

ꢀUse the [Channel Edit] option to

restore channels. See page 21.

ꢀThe skipped channels were deleted with

the Channel Edit option.

Cause

ꢀ No disc is inserted.

Correction

Symptom

ꢀ Insert a disc. (Check that the disc indi-

cator in the display window is lit.)

The Recorder does not

start playback.

ꢀ An unplayable disc is inserted.

ꢀ Insert a playable disc. (Check the disc

type and Regional code.)

ꢀ The disc is placed upside down.

ꢀ Place the disc with the playback side

down.

ꢀ Place the disc on the disc tray correctly

ꢀ The disc is not placed within the

inside the guide.

guide.

ꢀ Clean the disc.

ꢀ The disc is dirty.

ꢀ Cancel the Rating function or change

ꢀ The Rating level is set.

the rating level.

The Remote Control

ꢀ Remove the obstacle.

ꢀ There is an obstacle in the path of the

does not work properly.

Remote Control and this unit.

ꢀ The batteries in the Remote Control

ꢀ Replace the batteries with new ones.

are exhausted.

ꢀ The Remote Control is not pointed at

ꢀ Point the Remote Control at the remote

the remote sensor of the Recorder.

sensor of the Recorder.

ꢀ The Remote Control is too far from

ꢀ Operate the Remote Control within

the Recorder.

23ft (7m).

ꢀ Camcorder is off.

ꢀ Turn camcorder on and operate

properly.

Camcorder image is

not shown.

Camcorder image via

A/V input or DV IN to

Recorder is not shown

on TV screen.

ꢀ The recorder’s source is incorrect.

ꢀ Use INPUT to select input channel

(AV1, AV2 or DV IN).

ꢀ Clock in record is not set to

correct time.

ꢀ Set clock to correct time.

Timer recording is not

possible.

ꢀ Timer has been programmed

ꢀ Reprogram Timer.

incorrectly.

ꢀ Reprogram Timer and turn the

Recorder off to enable timer.

ꢀ

(TIMER Record) indicator light does

not appear after programming timer.

Cause

Correction

Symptom

ꢀ Antenna or cables are loose.

ꢀ Tighten connections or replace cable.

Picture or sound of

broadcasting channel is

weak or missing.

ꢀ Wrong Tuning Band is selected in the ꢀ Try [Auto Channel Set] options; see

Recorder Setup menu. page 21 for details.

ꢀ The disc was recorded in Video mode. ꢀ Finalize the disc; see page 26.

Can’t play disc recorded

on this Recorder on

another DVD player.

ꢀ Some players will not play even a

ꢀ No solution.

finalized disc recorded in Video mode.

ꢀ The disc was recorded in VR mode.

ꢀ The other player must be RW

compatible in order to play it.

ꢀ Discs recorded with copy-once materi- ꢀ No solution.

al cannot be played on other players.

ꢀ The remaining blank space on the

ꢀ Use another disc.

Cannot record or did

disc is insufficient.

not record successfully.

ꢀ The source you are trying to record is ꢀ You cannot record the source.

copy-protected.

ꢀ When setting the recording channel,

the channel is tuned on the TV’s own

tuner.

ꢀ Select the channel on the Recorder’s

built-in TV tuner.

ꢀ When recording to a Video mode disc, ꢀ Use a VR mode formatted disc for

programs that are copy-once protect-

ed cannot be recorded.

copy-once material.

ꢀ TV is not Stereo-compatible.

ꢀ No solution.

Stereo Audio Record

and/or Playback not

present.

ꢀ Broadcast program is not in stereo for- ꢀ No solution.

mat.

ꢀ Recorder A/V Out jacks are not

ꢀ Make A/V connections. Stereo is avail-

connected to TV A/V In jacks.

able only via A/V output from Recorder.

ꢀ Recorder Audio/Video Out is not

ꢀ Select AUX or A/V source as TV input.

selected for viewing at the TV.

ꢀ Recorder’s TV audio channel is set to ꢀ Set TV audio channel mode to Stereo.

SAP or MONO.

See [Changing TV Audio Channel] on

page 37.

You can reset the Recorder as follows:

Resetting the Recorder

•

Press and hold the POWER button for more

than five seconds. This will force the Recorder

to power off.

If you observe any of the following symptoms...

•

When the Recorder is plugged in, but the

power will not turn on or off.

Press the POWER button again to turn the

Recorder back on.

•

When the display window is not working.

•

Unplug the power cord and then plug the

power cord again after more than five sec-

onds.

When the Recorder does not operate

normally.

Specifications

General

Power requirements

AC 120V, 60 Hz

Power consumption

Dimensions (approx.)

Net Weight (approx.)

Operating temperature

Operating humidity

Signal system

23W

430 X 55 X 275 mm (16.9 x 2.2 x 10.8 inches) (w x h x d)

2.8 kg (6.2 lbs)

5˚C to 35˚C (41˚F to 95˚F)

5 % to 90 %

NTSC, DTV standard ATSC or Clear QAM over cable

Recording

Recording format

Recordable discs

DVD VideoRecording, DVD-VIDEO

DVD-ReWritable, DVD-Recordable, DVD+ReWritable,

DVD+Recordable (Double Layer), DVD-Random Access Memory

DVD; Approx. 1 hour (XP mode), 2 hours (SP mode),

4 hours (LP mode), 6 hours (EP mode), 11 hours (MLP)

DVD+R DL (8.5GB); Approx. 1.8 hour (XP mode), 3.6 hours (SP mode),

7.3 hours (LP mode), 9 hours (EP mode),

Recordable time

11 hours (MLP)

Video recording format

Sampling frequency

27MHz

Compression format

MPEG 2 (VBR support)

Audio recording format

Sampling frequency

48kHz

Compression format

Dolby Digital

DVD Specifications

Laser system

Frequency response

Signal-to-noise ratio

Harmonic distortion

Dynamic range

Semiconductor laser, wavelength 650 nm

DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz

More than 95dB

Less than 0.008%

More than 90 dB

Inputs

ANTENNA IN

VIDEO IN (AV1,2)

AUDIO IN (AV1,2)

DV IN

Antenna or CATV input, 75 ohms

1.0 Vp-p 75 ohms, sync negative, RCA jack x 2

- 6.0 dBm more than 47 kohms, RCA jack (L, R) x 2

4 pin (IEEE 1394 standard)

USB IN

4 pin (USB 1.1 standard)

Outputs

VIDEO OUTPUT

1 Vp-p 75 Ω, sync negative, RCA jack x 1

(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1

S-VIDEO OUTPUT

COMPONENT OUTPUT

(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1

(PB)/(PR) 0.7 V (p-p), 75 Ω, RCA jack x 2

19 pin (HDMI standard, Type A)

0.5 V (p-p), 75 Ω, RCA jack x 1

Optical connector x 1

HDMI video/audio output

Audio output (digital audio)

Audio output (optical audio)

Audio output (analog audio)

ANTENNA OUT

1 kHz, -6 dBm, 600 Ω, RCA jack (L, R) x 2

Channel 3 or 4 (Switchable)

IR TRANSMITTER OUT

5 V (p-p)

Accessory:

Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . .

IR control cable . . . . . . . . . . . . . . . . . . . . . . . . . .1

Audio cable (L, R) . . . . . . . . . . . . . . . .1

Remote Control . . . . . . . . . . . . . . . . . .1

Batteries . . . . . . . . . . . . . . . . . . . . . . .2

Design and specifications are subject to change without notice.

LG Electronics, Inc.

Limited Warranty - USA

This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or

workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date

(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-

chaser of the product and effective only when used in the United States, excluding U.S. Territories.

WARRANTY PERIOD:

HOW SERVICE IS HANDLED:

LABOR: 90 days from the Date of Purchase.

Call 1-800-243-0000 for instructions on getting the

defective unit repaired or replaced.

PARTS: One Year from the Date of Purchase.

Please retain dated sales receipt and your box to

return the unit to LG for repair or replacement.

* Parts replaced are warranted for the remaining portion

of the original warranty period.

Shipping both ways will be paid by LG during the

Warranty Period. After the Warranty Period, you pay

inbound shipping charges and LG pays return shipping

charges.

Visit our website at: http://www.lgservice.com

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED

WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-

TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES

OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST

REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED

IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-

ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty

gives you specific legal rights and you may also have other rights that may vary from state to state.

THIS LIMITED WARRANTY DOES NOT APPLY TO:

•

Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,

maintenance or failure to maintain, or separate system components; and

•

Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside

environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,

lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or

voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer

software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.

Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.

CUSTOMER INTER-ACTIVE CENTER NUMBERS:

For nearest Authorized Service Center, Where to buy,

Product Assistance, or Customer Assistance

Call 1-800-243-0000 (24 hours a day, 365 days per year)

and select appropriate options from the menu.

Or visit our website at http://www.lgservice.com

LG ELECTRONICS U.S.A., INC.

1000 SYLVAN AVENUE

P/N: MFL36929024

Issue O

ENGLEWOOD CLIFFS, NJ

Printed in China

HP Hewlett Packard Vp15 User Manual
Intel Computer Hardware XP P41533E User Manual
KitchenAid KECC508RPT01 User Manual
Lenovo D173 User Manual
LG Electronics 30FZ1DC 32FZ1DC UB User Manual
NEC MultiSync LCD1760NX User Manual
Philips 21PT8467 User Manual
Philips 28PT532A User Manual
Philips 241B4LP User Manual
Philips Brilliance 200PW8ES User Manual