LG Electronics LG Life Good Computer Monitor W2043SE User Manual

OWNER’S MANUAL  
LCD MONITOR  
Please read this manual carefully before operating your set and  
retain it for future reference.  
LCD MONITOR MODELS  
W1943SB  
W2043SE W2043TE  
W2243S W2243T  
W1943TB  
Important Precautions  
This unit has been engineered and manufactured to ensure your personal safety,  
however improper use may result in potential electrical shock or fire hazards. In  
order to allow the proper operation of all safeguards incorporated in this display,  
observe the following basic rules for its installation, use, and servicing.  
On Safety  
Use only the power cord supplied with the unit. In case you use another power  
cord, make sure that it is certified by the applicable national standards if not being  
provided by the supplier. If the power cable is faulty in any way, please contact the  
manufacturer or the nearest authorized repair service provider for a replacement.  
The power supply cord is used as the main disconnection device. Ensure that the  
socket-outlet is easily accessible after installation.  
Operate the display only from a power source indicated in the specifications of  
this manual or listed on the display. If you are not sure what type of power supply  
you have in your home, consult with your dealer.  
Overloaded AC outlets and extension cords are dangerous. So are frayed power  
cords and broken plugs. They may result in a shock or fire hazard. Call your service  
technician for replacement.  
As long as this unit is connected to the AC wall outlet, it is not disconnected from  
the AC power source even if the unit is turned off.  
Do not Open the Display:  
There are no user serviceable components inside.  
There are Dangerous High Voltages inside, even when the power is OFF.  
Contact your dealer if the display is not operating properly.  
To Avoid Personal Injury :  
Do not place the display on a sloping shelf unless properly secured.  
Use only a stand recommended by the manufacturer.  
Do not drop an object on or apply impact to the product. Do not throw any toys  
or objects on the product screen.  
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:  
Always turn the display OFF if you leave the room for more than a short period  
of time. Never leave the display ON when leaving the house.  
Keep children from dropping or pushing objects into the display's cabinet  
openings. Some internal parts carry hazardous voltages.  
Do not add accessories that have not been designed for this display.  
When the display is to be left unattended for an extended period of time, unplug  
it from the wall outlet.  
In the presence of thunder and lightning, never touch the power cord and signal  
cable because it can be very dangerous. It can cause electric shock.  
1
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place  
the display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
Leaving a fixed image on the screen for a long time may cause damage to the  
screen and cause image burn-in. Make sure to use a screen saver on the product.  
Burn-in and related problems are not covered by the warranty on this product.  
Do not shock or scratch the front and sides of the screen with metallic objects.  
Otherwise, it may cause damage to the screen.  
Make sure the panel faces forward and hold it with both hands to move. If you  
drop the product, the damaged product can cause electric shock or fire. Contact  
an authorized the service center for repair.  
Avoid high temperatures and humidity.  
2
Important Precautions  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
When cleaning the product, unplug the power cord and scrub gently with a soft  
cloth to prevent scratching. Do not clean with a wet cloth or spray water or  
other liquids directly onto the product. An electric shock may occur. (Do not use  
chemicals such as benzene, paint thinners or alcohol)  
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;  
wipe in one direction only. Too much moisture may cause staining.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
On Disposal (Only, Hg lamp used LCD Monitor)  
The fluorescent lamp used in this product contains a small amount of mercury.  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of  
your local authority.  
3
Accessories  
!!! Thank for selecting LGE products !!!  
Please make sure the following items are included with your  
monitor. If any items are missing, contact your dealer.  
User's Guide/Cards  
Power Cord  
(Depending on the country)  
DVI-D Signal Cable  
(This feature is not available  
in all countries.)  
15-pin D-Sub Signal Cable  
(To set it up, this signal cable may  
be attached to this product before  
shipping out.)  
IMPORTANT  
This accessories may look different from those shown here.  
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite  
cores to maintain standard compliance for the product.  
4
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices are turned off.  
Connecting and Disassembling the stand  
1. Place the monitor face down on the soft cloth.  
2. Assemble the Stand Base into the Stand Body in the correct direction.  
Stand Body  
Stand Base  
3. Turn the Stand Base Lock through 90˚ to fix the Stand Base to the Stand Body.  
Base Lock  
<Locked>  
4. Once assembled, lift the monitor up carefully.  
5
Connecting the Display  
5. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Stand  
Body.  
<Unlocked>  
If you can't release the Stand Base even the Locking Knob is at a release position,  
Please push the indicated knob down and retry it.  
Locking Knob  
6. Pull out the Stand Base to remove.  
IMPORTANT  
This picture depicts the general model of connection. Your monitor may differ from the items  
shown in the picture.  
Do not carry the product upside down holding only the stand base. The product may fall and  
get damaged or cause injury.  
6
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices is turned off.  
Positioning your display  
-After installation, adjust the angle as shown below.  
1. Adjust the position of the panel in various ways for maximum comfort.  
Tilt Range : -5˚~15˚  
15  
-5  
Do not touch or press the screen when  
adjusting the angle of the monitor.  
ERGONOMIC  
It is recommended that in order to maintain an ergonomic and comfortable viewing position,  
the forward tilt angle of the monitor should not exceed 5 degrees.  
7
Connecting the Display  
W1943TB/W2043TE/W2243T  
Connecting with the PC  
1. Before setting up the monitor, ensure that the power to the monitor, the computer  
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr cooff.rd  
in order, then tighten the screw  
1
2
of the signal cable.  
A
Connect D-sub(Analog signal) Cable  
B
Connect DVI-D(Digital signal) Cable  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
When using a D-Sub signal input cable connector  
for Macintosh  
Mac adapter : For older Apple Macintosh use,  
a separate plug adapter is needed to change  
the 15 pin high density (3 row) D-sub VGA  
connector on the supplied cable to a 15 pin 2  
row connector.  
Varies according to model.  
Wall-outlet type  
DVI-D (This feature is not available in all countries.)  
3. Press the power button on the front panel to turn the power on. When monitor power is  
turned on, the 'Self Image Setting Function' is executed automatically.  
(Only Analog Mode)  
Power Button  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display  
settings.When the user connects the monitor for the first time, this function automatically adjusts  
the display to optimal settings for individual input signals.  
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,  
screen flicker or tilted screen while using the device or after changing screen resolution, press  
the AUTO/SET function button to improve resolution.  
8
Connecting the Display  
W1943SB/W2043SE/W2243S  
Connecting with the PC  
1. Before setting up the monitor, ensure that the power to the monitor, the computer  
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr cooff.rd  
in order, then tighten the screw  
1
2
of the signal cable.  
A
Connect D-sub(Analog signal) Cable  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
When using a D-Sub signal input cable connector for  
Macintosh  
Mac adapter : For older Apple Macintosh use,  
a separate plug adapter is needed to change  
the 15 pin high density (3 row) D-sub VGA  
connector on the supplied cable to a 15 pin 2  
row connector.  
Varies according to model.  
Wall-outlet type  
A
PC  
3. Press the power button on the front panel to turn the power on. When monitor power is  
turned on, the 'Self Image Setting Function' is executed automatically.  
Power Button  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display  
settings.When the user connects the monitor for the first time, this function automatically adjusts  
the display to optimal settings for individual input signals.  
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,  
screen flicker or tilted screen while using the device or after changing screen resolution, press  
the AUTO/SET function button to improve resolution.  
9
Control Panel Functions  
Front Panel Controls  
W1943TB/W2043TE/W2243T  
1 2  
3
4
4
5
5
W1943SB/W2043SE/W2243S  
1 2  
3
Use this button to enter 4:3 IN WIDE, PHOTO EFFECT  
menus.  
Button  
For more information, refer to page 14.  
Use this button to enter or exit the On Screen Display.  
MENU Button  
OSD LOCKED/UNLOCKED  
This function allows you to lock the current control  
settings, so that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds.  
The message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for several seconds. The message  
"OSD UNLOCKED" should appear.  
10  
Control Panel Functions  
Use these buttons to select or adjust functions in the On  
Screen Display.  
Buttons  
Use this function to select optimal image conditions in  
accordance with the surrounding environment  
(Brightness, Image type).  
For more information, refer to page 15.  
When two input signals are connected, you can select the  
input signal (D-SUB/DVI) you want. When only one signal  
is connected, it is automatically detected. The default  
setting is D-Sub. (Only W1943TB/W2043TE/W2243T )  
(SOURCE Hot key)  
Use this button to enter a selection in the On Screen  
Display.  
AUTO/SET  
Button  
AUTO IMAGE ADJUSTMENT  
When adjusting your display settings, always press  
the AUTO/SET button before entering the On Screen  
Display(OSD). (Only Analog Mode)  
This will automatically adjust your display image to  
the ideal settings for the current screen resolution  
size (display mode).  
The best display mode is  
W1943SB/W1943TB : 1360 x 768  
W2043SE/W2043TE : 1600 x 900  
W2243S/W2243T : 1920 x 1080  
Use this button to turn the display on or off.  
Power Button &  
Power Indicator  
The power indicator stays red if the display is running  
properly (On Mode). If the display is in Sleep Mode  
(Energy Saving), the power indicator is blinking red.  
11  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating  
parameters of the display is quick and easy with the On Screen  
Display Control system.  
A short example is given below to familiarize you with the use of the  
controls. The following section is an outline of the available  
adjustments and selections you can make using the OSD.  
To make adjustments in the On Screen Display, follow these steps:  
Move where  
you want to  
adjust  
Select a  
menu icon  
Adjust the  
status  
Exit from the  
menu screen.  
Pops up the  
menu screen  
Press the MENU Button, then the main menu of the OSD appears.  
1
2
To access a control, use the  
or  
Buttons. When the icon you want  
becomes highlighted, press the AUTO/SET Button.  
Use the  
/
Buttons to adjust the image to the desired level.  
3
4
Use the AUTO/SET Button to select other sub-menu items.  
Press the MENU Button once to return to the main menu to select another  
function. Press the MENU Button twice to exit from the OSD.  
12  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
: Analog Input only  
*
Main menu  
4:3 IN WIDE  
Sub-menu  
Description  
To adjust the image size  
NORMAL  
PHOTO  
EFFECT  
To adjust the screen color mode  
GAUSSIAN BLUR  
SEPIA  
MONOCHROME  
F-ENGINE  
MOVIE  
To select or customize desired  
image settings  
INTERNET  
USER  
NORMAL  
DEMO  
BRIGHTNESS  
CONTRAST  
GAMMA  
PICTURE  
COLOR  
To adjust the brightness,  
contrast and gamma of the  
screen  
PRESET  
(sRGB / 6500K / 9300K)  
To customize the color of the  
screen  
RED  
GREEN  
BLUE  
* HORIZONTAL  
* VERTICAL  
To adjust the position of the  
screen  
TRACKING  
SETUP  
* CLOCK  
To improve the clarity and stability  
of the screen  
* PHASE  
SHARPNESS  
LANGUAGE  
To customize the screen  
status for a user's operating  
environment  
OSD POSITION  
(HORIZONTAL / VERTICAL)  
* WHITE BALANCE  
POWER INDICATOR  
FACTORY RESET  
NOTE  
The order of icons may differ depending on the model (13~19).  
13  
On Screen Display(OSD) Selection and Adjustment  
The following OSD screen will appear when you press the  
the front of the monitor.  
button on  
MENU : Exit  
: Move  
SET : Select  
Main menu  
4:3 IN WIDE  
Description  
To select the image size of the screen.  
4:3  
WIDE  
WIDE  
: Switch to full screen mode  
according to input image signal.  
4:3  
: Change the input image signal ratio to  
4:3.  
To select the color effects of the screen.  
PHOTO  
EFFECT  
NORMAL  
The PhotoEffect function is disabled.  
GAUSSIAN BLUR  
Use the AUTO/SET button  
to go to sub-menu.  
This menu changes the screen to be more  
colorful and smoother.  
SEPIA  
This menu changes the screen to be Sepia  
tone (brown color).  
MONOCHROME  
This menu changed the screen to be Gray  
scale(black-and-white Picture) .  
NORMAL  
SEPIA  
MONOCHROME  
GAUSSIAN BLUR  
14  
On Screen Display(OSD) Selection and Adjustment  
The following OSD screen will appear when you press the  
button  
on the front of the monitor.This feature lets you easily select the best desired  
image condition optimized to the environment (ambient illumination, image  
types etc).  
Menu Name  
Icons  
MENU : Save & Exit  
Sub-menu Name  
,
: Move  
F-ENGINE  
Active state  
Inactive state  
When the F-ENGINE is executed, the screen is split  
to show the effects of the selected function. The active  
state is to the left and the inactive state is to the right  
side of the screen. Select the function you want and  
press the [MENU] button to save the setting.  
Main menu  
Sub menu  
Description  
For moving images in videos or movies.  
MOVIE  
INTERNET For text images (Word processing etc.).  
USER  
USER  
You can manually adjust ACE or RCM.  
You can save or restore the adjusted value even  
when using a different condition  
.
ACE (Adaptive Clarity Enhancer): Selects the clarity mode.  
To adjust the USER sub-menu function,  
press the AUTO/SET Button  
Not applied  
Weak clarity and luminosity contrast.  
Strong clarity and luminosity contrast.  
RCM (Real Color Management): Selects the color mode.  
Not applied  
Salmon color tone  
Color Enhance  
MENU : Exit  
: Decrease  
: Increase  
Green enhance  
SET : Select another sub-menu  
NORMAL  
DEMO  
This is under normal operating conditions.  
* Normal mode is when f-ENGINE is turned off.  
This is used for advertising in the store. The screen will  
be divided to show the standard mode on the left and  
video mode on the right so that the consumers can  
check the difference after applying the video mode.  
15  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Press the MENU Button, then the main  
menu of the OSD appears.  
Main Menu  
MENU  
SET  
: Exit  
: Adjust (Decrease/Increase)  
: Enter  
: Select another sub-menu  
: Restart to select sub-menu  
Button  
Tip  
Menu Name  
Icons  
Sub-  
menus  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
16  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
PICTURE  
To adjust the brightness of the screen.  
To adjust the contrast of the screen.  
BRIGHTNESS  
CONTRAST  
GAMMA  
Set your own gamma value. : -50 / 0 / 50  
On the monitor, high gamma values  
display whitish images and low gamma  
values display blackish images.  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another sub-menu  
COLOR  
Select the screen color.  
sRGB: Set the screen color to fit the  
sRGB standard color  
PRESET  
specification.  
6500K: Slightly reddish white.  
9300K: Slightly bluish white.  
Set your own red color levels.  
Set your own green color levels.  
Set your own blue color levels.  
RED  
GREEN  
BLUE  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another sub-menu  
17  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
TRACKING  
HORIZONTAL  
To move image left and right.  
To move image up and down.  
VERTICAL  
CLOCK  
To minimize any vertical bars or  
stripes visible on the screen  
background.  
The horizontal screen size will also  
change.  
To adjust the focus of the display.  
This item allows you to remove any  
horizontal noise and clear or sharpen  
the image of characters.  
PHASE  
MENU : Exit  
: Decrease  
: Increase  
To adjust the clearness of the screen.  
SHARPNESS  
SET : Select another sub-menu  
18  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
SETUP  
W1943SB/W2043SE/W2243S  
To choose the language in which the  
control names are displayed.  
LANGUAGE  
OSD  
POSITION  
To adjust position of the OSD window  
on the screen.  
WHITE  
BALANCE  
If the output of the video card is  
different the required specifications,  
the color level may deteriorate due  
to video signal distortion. Using this  
function, the signal level is adjusted  
to fit into the standard output level of  
the video card in order to provide the  
optimal image.  
Activate this function when white  
and black colors are present in the  
screen.  
W1943TB/W2043TE/W2243T  
Use this function to set the power  
indicator on the front side of the monitor  
to ON or OFF.  
POWER  
INDICATOR  
If you set OFF, it will go off.  
If you set ON at any time, the power  
indicator will automatically be turned on.  
Restore all factory default settings except  
FACTORY  
RESET  
"LANGUAGE."  
Press the  
,
buttons to reset immediately.  
MENU : Exit  
: Adjust  
: Adjust  
SET : Select another  
sub-menu  
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the  
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog  
signal.  
19  
Troubleshooting  
Check the following before calling for service.  
No image appears  
G Is the power cord of the  
Check and see if the power cord is connected  
properly to the power outlet.  
display connected?  
G Is the power indicator  
Press the Power button.  
light on?  
Adjust the brightness and the contrast.  
G Is the power on and the  
power indicator red?  
G Is the power indicator  
If the display is in power saving mode, try moving  
the mouse or pressing any key on the keyboard to  
bring up the screen.  
blinking?  
Try to turn on the PC  
.
This message appears when the signal from the  
G Do you see an "OUT OF  
RANGE" message on  
the screen?  
PC (video card) is out of horizontal or vertical  
frequency range of the display. See the  
'Specifications' section of this manual and  
configure your display again.  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try again.  
G Do you see a "CHECK  
SIGNAL CABLE"  
message on the  
screen?  
Do you see a "OSD LOCKED" message on the screen?  
G
Do you see OSD  
LOCKEDwhen you  
push MENU button?  
You can secure the current control settings,  
so that they cannot be inadvertently changed.  
You can unlock the OSD controls at any time  
by pushing the MENU button for several  
seconds: the message  
OSD UNLOCKEDwill appear.  
20  
Troubleshooting  
Display image is incorrect  
G Display Position is  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position icon  
in the on screen display.  
incorrect.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
G On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).  
G Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
portrayed.  
IMPORTANT  
Check Control Panel --> Display --> Settings and see if the frequency or the  
resolution were changed. If yes, readjust the video card to the recommend  
resolution.  
If the recommended resolution (optimal resolution) is not selected, letters may be  
blurred and the screen may be dimmed, truncated or biased. Make sure to select  
the recommend resolution.  
The setting method can differ by computer and O/S (Operation System),  
and resolution mentioned above may not be supported by the video card  
performance. In this case, please ask to the computer or the video card  
manufacturer.  
21  
Troubleshooting  
Display image is incorrect  
G The screen color is  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true color)  
at Control Panel - Settings.  
mono or abnormal.  
G The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
Do you see an "Unrecognized monitor, Plug&Play (VESA  
DDC) monitor found" message?  
G
Have you installed the  
display driver?  
Be sure to install the display driver from the display  
driver CD (or diskette) that comes with your  
display. Or, you can also download the driver from  
Make sure to check if the video card supports  
Plug&Play function.  
22  
Specifications  
W1943TB  
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 47.01 cm  
0.30 x 0.30 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 61 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green), Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector  
DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
Max  
Recommend  
VESA 1360 x 768 @60 Hz  
VESA 1360 x 768 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
21W(Typ.)  
1 W  
1 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 44.90 cm / 17.68 inches  
Height 36.10 cm / 14.21 inches  
Depth 18.30 cm / 7.20 inches  
Width 44.90 cm / 17.68 inches  
Height 29.05 cm / 11.44 inches  
Depth 5.85 cm / 2.30 inches  
Weight(excl. packing)  
3.3 kg (7.28 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 0.8A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
23  
Specifications  
W1943SB  
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 47.01 cm  
0.30 x 0.30 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 61 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green)  
Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
Max  
Recommend  
VESA 1360 x 768 @60 Hz  
VESA 1360 x 768 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
21W(Typ.)  
1 W  
1 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 44.90 cm / 17.68 inches  
Height 36.10 cm / 14.21 inches  
Depth 18.30 cm / 7.20 inches  
Width 44.90 cm / 17.68 inches  
Height 29.05 cm / 11.44 inches  
Depth 5.85 cm / 2.30 inches  
Weight(excl. packing)  
3.3 kg (7.28 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 0.8A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
24  
Specifications  
W2043TE  
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 50.8 cm  
0.2766 x 0.2766 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 83 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green), Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector  
DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
Max  
Recommend  
VESA 1600 x 900 @60 Hz  
VESA 1600 x 900 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
25 W(Typ.)  
0.5 W  
0.5 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 48.36 cm / 19.04 inches  
Height 37.68 cm / 14.83 inches  
Depth 18.30 cm / 7.20 inches  
Width 48.36 cm / 19.04 inches  
Height 31.40 cm / 12.36 inches  
Depth 6.30 cm / 2.48 inches  
Weight(excl. packing)  
3.2 kg (7.05 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
25  
Specifications  
W2043SE  
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 50.8 cm  
0.2766 x 0.2766 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 83 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green)  
Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
Max  
Recommend  
VESA 1600 x 900 @60 Hz  
VESA 1600 x 900 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
25 W(Typ.)  
0.5 W  
0.5 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 48.36 cm / 19.04 inches  
Height 37.68 cm / 14.83 inches  
Depth 18.30 cm / 7.20 inches  
Width 48.36 cm / 19.04 inches  
Height 31.40 cm / 12.36 inches  
Depth 6.30 cm / 2.48 inches  
Weight(excl. packing)  
3.2 kg (7.05 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
26  
Specifications  
W2243T  
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 54.686 cm  
0.248 x 0.248 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 83 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green), Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector  
DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
Max  
Recommend  
VESA 1920 x 1080 @60 Hz  
VESA 1920 x 1080 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
40W(Typ.)  
1 W  
1 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 51.64 cm / 20.33 inches  
Height 39.61 cm / 15.59 inches  
Depth 19.80 cm / 7.80 inches  
Width 51.64 cm / 20.33 inches  
Height 33.27 cm / 13.10 inches  
Depth 6.20 cm / 2.44 inches  
Weight(excl. packing)  
3.8 kg (8.38 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
27  
Specifications  
W2243S  
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size : 54.686 cm  
0.248 x 0.248 mm (Pixel pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 - 83 kHz (Automatic)  
56 - 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green)  
Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
Max  
Recommend  
VESA 1920 x 1080 @60 Hz  
VESA 1920 x 1080 @60 Hz  
Resolution  
Plug&Play  
DDC 2B  
:
40W(Typ.)  
1 W  
1 W  
On Mode  
Power  
Consumption  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 51.64 cm / 20.33 inches  
Height 39.61 cm / 15.59 inches  
Depth 19.80 cm / 7.80 inches  
Width 51.64 cm / 20.33 inches  
Height 33.27 cm / 13.10 inches  
Depth 6.20 cm / 2.44 inches  
Weight(excl. packing)  
3.8 kg (8.38 lbs)  
Tilt : -5˚~15˚  
Range  
AC 100-240V~ 50/60Hz 1.0A  
Operating Conditions  
Power Input  
Environment  
al Conditions  
Temperature  
Humidity  
10˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
28  
Specifications  
Preset Modes (Resolution)  
W1943SB/W1943TB  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
70  
60  
75  
60  
75  
75  
60  
75  
60  
1
2
3
4
5
6
7
8
*9  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1360 x 768  
31.468  
31.469  
37.500  
37.879  
46.875  
49.725  
48.363  
60.123  
47.712  
VGA  
VGA  
VESA  
VESA  
VESA  
MAC  
VESA  
VESA  
VESA  
W2043SE/W2043TE  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
70  
60  
75  
60  
75  
60  
75  
75  
60  
1
2
3
4
5
6
7
8
*9  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1600 x 900  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
60.000  
VGA  
VGA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
29  
Specifications  
W2243S/W2243T  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
60  
60  
1
2
720 x 400  
640 x 480  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
63.981  
79.976  
65.290  
67.500  
VGA  
VGA  
3
640 x 480  
VGA  
4
800 x 600  
800 x 600  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
5
6
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1920 x 1080  
7
8
9
10  
11  
*12  
*Recommend Mode  
Indicator  
LED Color  
MODE  
Red  
Red Blinking  
Off  
On Mode  
Sleep Mode  
Off Mode  
30  
Installing the Wall mount plate  
This monitor satisfies the specifications of the Wall mount plate  
or the interchange device.  
1. Place the monitor face down on the soft cloth.  
2. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Stand  
Body.  
<Unlocked>  
If you can't release the Stand Base even the Locking Knob is at a release  
position, Please push the indicated knob down and retry it.  
Locking Knob  
3. Pull out the Stand Base to remove.  
31  
Installing the Wall mount plate  
4. Install the Wall mount plate.  
Wall mount plate(Separate purchase)  
This is stand-type or wall mount type and is  
connectable with Wall mount plate.  
Please refer to the installation guide for more details,  
which is provided when Wall mount plate is  
purchased. LG recommends that wall mounting be  
performed by a qualified professional installer.  
Kensington Security Slot  
Connected to a locking cable that  
can be purchased separately at  
most computer stores.  
32  

Iiyama AQU5611D BK User Manual
KitchenAid Cooktop xgcd807x User Manual
Lenovo LXH GJ17L3 User Manual
Oricom TP110 User Manual
Panasonic CRT Television CT 24SX12UF User Manual
Panasonic DMR EX77 User Manual
Philips 28PW632B User Manual
Philips 105G7 User Manual
Philips Cordless Telephone CD480 User Manual
Philips RD0946 User Manual