LG Electronics LG Life Good Computer Monitor N1642WP User Manual

User’s Guide  
Network Monitor  
N1642W  
N1642WP  
N1941W  
N1941WP  
N1941WE  
Make sure to read the Important Precautions before using the product.  
Keep the User's Guide(CD) in an accessible place for future reference.  
See the label attached on the product and give the information to your  
dealer when you ask for service.  
With LG Network Monitor, some PC programs may not be compatible or  
need to be modified due to different kind of operation.  
Please check the compatibility in advance, before purchasing or installing  
the software. LG do not have any kind of legal liability on this matter.  
Important Precautions  
This unit has been engineered and manufactured to ensure your personal  
safety, however improper use may result in potential electrical shock or fire  
hazards. In order to allow the proper operation of all safeguards  
incorporated in this display, observe the following basic rules for its  
installation, use, and servicing.  
On Safety  
Use only the power cord supplied with the unit. In case you use another power  
cord, make sure that it is certified by the applicable national standards if not being  
provided by the supplier. If the power cable is faulty in any way, please contact the  
manufacturer or the nearest authorized repair service provider for a replacement.  
The power supply cord is used as the main disconnection device. Ensure that the  
socket-outlet is easily accessible after installation.  
Operate the display only from a power source indicated in the specifications of this  
manual or listed on the display. If you are not sure what type of power supply you  
have in your home, consult with your dealer.  
Overloaded AC outlets and extension cords are dangerous. So are frayed power  
cords and broken plugs. They may result in a shock or fire hazard. Call your  
service technician for replacement.  
As long as this unit is connected to the AC wall outlet, it is not disconnected from  
the AC power source even if the unit is turned off.  
Do not Open the Display:  
There are no user serviceable components inside.  
There are Dangerous High Voltages inside, even when the power is OFF.  
Contact your dealer if the display is not operating properly.  
To Avoid Personal Injury :  
Do not place the display on a sloping shelf unless properly secured.  
Use only a stand recommended by the manufacturer.  
Do not drop an object on or apply impact to the product. Do not throw any toys  
or objects on the product screen.  
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:  
Always turn the display OFF if you leave the room for more than a short period  
of time. Never leave the display ON when leaving the house.  
Keep children from dropping or pushing objects into the display's cabinet  
openings. Some internal parts carry hazardous voltages.  
Do not add accessories that have not been designed for this display.  
When the display is to be left unattended for an extended period of time, unplug  
it from the wall outlet.  
In the presence of thunder and lightning, never touch the power cord and signal  
cable because it can be very dangerous. It can cause electric shock.  
A1  
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place the  
display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,  
laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
Leaving a fixed image on the screen for a long time may cause damage to the  
screen and cause image burn-in. Make sure to use a screen saver on the product.  
Burn-in and related problems are not covered by the warranty on this product.  
Do not shock or scratch the front and sides of the screen with metallic objects.  
Otherwise, it may cause damage to the screen.  
Make sure the panel faces forward and hold it with both hands to move. If you  
drop the product, the damaged product can cause electric shock or fire. Contact  
an authorized the service center for repair.  
Avoid high temperatures and humidity.  
A2  
Important Precautions  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
When cleaning the product, unplug the power cord and scrub gently with a soft  
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other  
liquids directly onto the product. An electric shock may occur. (Do not use  
chemicals such as benzene, paint thinners or alcohol)  
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;  
wipe in one direction only. Too much moisture may cause staining.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
On Disposal (Only , Hg lamp used LCD Monitor)  
The fluorescent lamp used in this product contains a small amount of mercury.  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of  
your local authority.  
A3  
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor, the  
computer system, and other attached devices is turned off.  
Connecting the stand  
1.  
Place the monitor with its front facing downward on a soft cloth.  
2.  
Assemble the Stand Body into the product in the correct direction as shown in the picture.  
Make sure you push it until you hear it “click”.  
Hinge Body  
Stand Body  
3.  
Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.  
Stand Body  
Stand Base  
4. Tie down the base lock to perpendicularity direction.  
5.  
Once assembled take the monitor up carefully and face  
the front side  
.
Important  
This illustration depicts the general model of connection. Your monitor may differ from  
the items shown in the picture.  
Do not carry the product upside down holding only the stand base. The product may  
fall and get damaged or injure your foot.  
A4  
Connecting the Display  
Disassembling the stand  
1. Put a cushion or soft cloth on a flat  
2. Place the monitor face down on the  
surface.  
cushion or soft cloth.  
3. Change your lock on the product as it follows and turn it in the arrow direction.  
If you can't release the stand base even the locking knob is at a release  
position, Please push the indicated knob down and retry it.  
4. Pull out the stand to remove.  
A5  
Connecting the Display  
5. Pushing the PUSH button, take the stand base from stand body.  
Warning:  
You can hurt your finger.  
Good Position  
Bad Position  
Before setting up the monitor, ensure that the power to the monitor, the  
computer system, and other attached devices is turned off.  
Positioning your display  
1. Adjust the position of the panel in various ways for maximum comfort.  
Tilt Range : -5˚~20˚  
When adjusting the angle of the  
screen, do not put your finger(s)  
in between the head of the  
monitor and the stand body. You  
can hurt your finger(s).  
Ergonomic  
It is recommended that in order to maintain an ergonomic and comfortable viewing  
position, the forward tilt angle of the monitor should not exceed 5 degrees.  
A6  
Connecting the Display  
Using the Computer  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
A
Connect D-sub(RGB Analog) Cable (PC)  
1.  
B
Connect D-sub(RGB Analog) Cable (Mac)  
Analog signal  
Wall-outlet type  
(This item must be purchased separately.)  
Mac adapter  
For Apple Macintosh use, a separate plug adapter is  
needed to change the 15 pin high density (3 row) D-sub  
VGA connector on the supplied cable to a 15 pin 2 row  
connector.  
2. Press  
button on the front switch panel to turn the  
power on. When monitor power is turned on, the  
'Self Image Setting Function' is executed automatically.  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user  
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual  
input signals.  
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted  
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve  
resolution.  
A7  
Connecting the Display  
Using the Monitor  
1. Make sure to turn off the computer and product. Connect the cable as below sketch map  
form  
1
to  
2
.
1
2
Connect peripheral devices  
Connect LAN Cable (X550 port)  
Analog signal  
Wall-outlet type  
Keyboard/Mouse Input  
LAN cable should be  
connected before boo-  
ting PC.(This item must  
be purchased separately.)  
(Make sure to connect X550  
port,not LAN port of PC)  
X550 port  
Up to 5 ports are supported per X550 PCI Card.  
Up to 5 ports can be connected if necessary.  
(These items are not included for all models.)  
Headphone/Earphone Input  
Automatically mutes the  
speaker volume when the  
headphones are plugged in.  
When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest  
level and adjust the monitor volume.  
It is recommended to use a PS/2-type keyboard/mouse.  
To use the monitor keyboard/mouse properly, it must be connected to the PC.  
Applications that require other than 16 bit color quality and the set resolution are not supported.  
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or titled  
screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve  
resolution.  
2. Press  
button on the front switch panel to turn the power on.  
A8  
Connecting the Display  
NOTE  
LAN Cable  
-For the LAN cable,it is recommended to use SFTP(recommend : 6m,max : 10m)  
provided by LG.  
Image quality and some functionality may be degraded if a different LAN cable is  
used.  
-To achieve good image quality,avoid using UTP and STP cables.  
-You must use a direct LAN cable,not a crossover one.  
Both connections  
should be same  
colors.  
Do not connect any kind of network devices.  
Core  
The ferrite core can be used to reduce electromagnetic waves when connecting a  
LAN cable.  
As shown in the image below,fit the ferrite core to the LAN cable.  
The ferrite core needs to be separated from the mold by 5 centimeters.  
You can purchase SFTP(recommend : 6m,max : 10m)LAN cables and cores  
through LG additionally.  
50 10mm  
50 10mm  
A9  
Connecting the Display  
Connecting to a X550 port using a LAN cable.  
Notice  
Turning the power off while booting the PC may damage the product.  
Turning the power off while booting the PC may cause it to operate incorrectly.  
If the mouse is connected using a USB device and is not detected, disconnect and  
connect it again.  
If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while  
the PC is in operation, the device may not work properly.  
Make sure that the power is turned off when disconnecting/connecting a peripheral  
device.  
Making both ends of LAN cable to across the coil two times before connect to  
network monitor and PC.  
PC spec :  
The host PC operating system can be Windows Server 2003 R2 SP2(Standard or  
Enterprise Edition, 32-bit).  
Notice  
- To achieve the best PC performance, up to six users are recommended for one PC.  
If there are seven or more users, performance may be degraded depending on the  
environment and the PC’s specifications.  
- Check if the PC supports Windows Server 2003 before purchasing it.  
A host PC should have the following specifications:  
1. Minimum  
- CPU : Dual core processor at 3.0 GHz or higher  
(i.e. : Intel Core 2 Duo or AMD Athlon X2)  
- RAM : 2 GB of system memory or higher  
2. Recommend  
- CPU : Quad core processor at 2.66 GHz or higher  
(i.e. Intel Core 2 Quad or AMD Phenom X4)  
- RAM : 4 GB of system memory  
3. Internet access speed may be different depending on the network environment.  
Restrictions :  
Using this network monitor for the following purposes may cause screen disruption  
or slower PC operation.  
1. Video / Moving picture  
2. Games  
Color setting:  
Image quality may vary depending on the X550 card, so it is recommended to  
execute “White Balance” when using the product as a network monitor after  
connecting a LAN cable for the first time.  
Refer to A18 for more information on White Balance.  
If you use the monitor with a X-PORT input, image quality and resolution may be poorer  
than with a D-sub input.  
(
Only 16 bit color is supported for X-PORT input.)  
A10  
Control Panel Functions  
Front Panel Controls  
Control  
Function  
• X-PORT : This menu is available, use this button to  
switch the sound on or off.  
MUTE Button  
or  
<mute off>  
<mute on>  
• D-sub : This menu is not available.  
Use this button to enter or exit the On Screen Display.  
MENU Button  
OSD LOCKED/UNLOCKED  
This function allows you to lock the current control  
settings, so that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds.  
The message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for several seconds. The message  
"OSD UNLOCKED" should appear.  
A11  
Control Panel Functions  
Control  
Function  
Use these buttons to select or adjust functions in the  
On Screen Display.  
SOURCE  
Use this button to make either D-Sub or X-PORT  
connector active. This feature is used when two  
input sources are connected to the display.  
Use these buttons to select or adjust functions in the On  
Screen Display.  
VOLUME  
Use  
buttons to decrease or increase the speaker  
volume on X-PORT input.  
Use this button to enter a selection in the On Screen  
Display.  
AUTO/SET  
Button  
AUTO IMAGE ADJUSTMENT  
When adjusting your display settings, always press  
the AUTO/SET button before entering the On Screen  
Display(OSD). This will automatically adjust your  
display image to the ideal settings for the current  
screen resolution size (display mode).  
The best display mode is  
-
-
16 inches : 1360 x 768  
19 inches : 1360 x 768  
Power Button  
Use this button to turn the display on or off.  
This Indicator lights up blue when the display  
operates normally(On Mode). If the display is in Sleep  
Mode (Energy Saving), this indicator color changes  
to flicker.  
Power Indicator  
A12  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating  
parameters of the display is quick and easy with the On Screen  
Display Control system.  
A short example is given below to familiarize you with the use of the  
controls. The following section is an outline of the available  
adjustments and selections you can make using the OSD.  
NOTE  
Allow the display to stabilize for at least 30 minutes before making image adjustments.  
To make adjustments in the On Screen Display, follow these steps:  
AUTO/SET  
MENU  
MENU  
Press the MENU Button, then the main menu of the OSD appears.  
To access a control, use the or Buttons. When the icon you want  
becomes highlighted, press the AUTO/SET Button.  
Use the  
/
Buttons to adjust the image to the desired level. Use the  
AUTO/SET Button to select other sub-menu items.  
Push the MENU Button once to return to the main menu to select another  
function. Push the MENU Button twice to exit from the OSD.  
A13  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
(
: Adjustable A : D-SUB Input X : X-PORT Input )  
Main menu  
PICTURE  
Sub-menu  
BRIGHTNESS  
CONTRAST  
GAMMA  
A
X
Reference  
To adjust the brightness,  
contrast and gamma of the  
screen  
sRGB  
To customize the color of  
the screen  
COLOR  
PRESET  
6500K  
9300K  
RED  
GREEN  
BLUE  
To adjust the position of the  
screen  
HORIZONTAL  
POSITION  
VERTICAL  
CLOCK  
TRACKING  
To improve the clarity and  
stability of the screen  
PHASE  
SHARPNESS  
LANGUAGE  
SETUP  
To customize the screen  
status for a user's operating  
environment  
OSD  
HORIZONTAL  
POSITION VERTICAL  
WHITE BALANCE  
POWER INDICATOR  
4:3 IN WIDE  
FACTORY RESET  
FLATRON  
F ENGINE  
MOVIE  
To select or customize  
desired image settings  
INTERNET  
ACE  
USER  
RCM  
NORMAL  
DEMO  
NOTE  
The order of icons may differ depending on the model (A14~A19).  
A14  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an  
item using the OSD system. Listed below are the icons, icon  
names, and icon descriptions of the all items shown on the Menu.  
Press the MENU Button, then the main menu of the OSD appears.  
Main Menu  
MENU  
SET  
: Exit  
: Adjust (Decrease/Increase)  
: Enter  
: Select another sub-menu  
: Restart to select sub-menu  
Button Tip  
Menu Name  
Sub-menus  
Icons  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
A15  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
PICTURE  
PICTURE  
BRIGHTNESS  
To adjust the brightness of the screen.  
To adjust the contrast of the screen.  
CONTRAST  
GAMMA  
Set your own gamma value. : -50/0/50  
On the monitor, high gamma values  
display whitish images and low gamma  
values display blackish images.  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another sub-menu  
COLOR  
COLOR  
Select the screen color.  
PRESET  
sRGB: Set the screen color to fit the  
SRGB standard color  
specification.  
6500K: Slightly reddish white.  
9300K: Slightly bluish white.  
Set your own red color levels.  
Set your own green color levels.  
Set your own blue color levels.  
RED  
GREEN  
BLUE  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another sub-menu  
A16  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
P O S IT IO N  
POSITION  
To move image left and right.  
To move image up and down.  
HORIZONTAL  
VERTICAL  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another sub-menu  
TRACKING  
TRACKING  
CLOCK  
To minimize any vertical bars or stripes  
visible on the screen background.  
The horizontal screen size will also  
change.  
PHASE  
To adjust the focus of the display.  
This item allows you to remove any  
horizontal noise and clear or sharpen  
the image of characters.  
MENU : Exit  
: Decrease  
: Increase  
SHARPNESS  
To adjust the clearness of the screen.  
SET : Select another  
sub-menu  
A17  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
To choose the language in which the  
control names are displayed.  
LANGUAGE  
SETUP  
SETUP  
OSD  
POSITION  
To adjust position of the OSD window  
on the screen.  
WHITE  
BALANCE  
If the output of the video card is different  
from the required specifications, the color  
level may deteriorate due to video signal  
distortion. Using this function, the signal  
level is adjusted to fit into the standard  
output level of the video card in order to  
provide the optimal image.  
Activate this function when white and  
black colors are present in the screen.  
Use this function to set the power  
indicator on the front side of the monitor  
to ON or OFF.  
POWER  
INDICATOR  
If you set OFF, it will go off.  
If you set ON at any time, the power  
indicator will automatically be turned on.  
Use this function to select the image size  
of the screen.  
4:3 IN WIDE  
MENU : Exit  
: Adjust  
: Adjust  
SET : Select another  
sub-menu  
WIDE  
4:3  
WIDE : Switch to full screen mode  
according to input image  
signal.  
4 : 3 : Change the image signal ratio  
into 4:3.  
Restore all factory default settings except  
FACTORY  
RESET  
"LANGUAGE" .  
Press the  
,
buttons to reset immediately.  
If this does not improve the screen image, restore the factory default settings.  
If necessary, perform the white balance function again. This function will be enabled only  
when the input signal is a D-sub or X-PORT input signal.  
A18  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
MOVIE  
INTERNET  
This feature lets you easily select the best desired  
image condition optimized to the environment  
(ambient illumination, image types etc).  
MOVIE: For animation images in videos or movies  
INTERNET: For text images (Word processing etc.)  
USER  
User  
You can manually adjust ACE or RCM.  
You can save or restore the adjusted value even  
when using a different environment.  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another  
...  
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.  
sub-menu  
...  
RCM(Real Color Management): Selects the color mode.  
0
Not applied  
1
Green enhance  
2
Flesh tone  
3
Color Enhance  
NORMAL  
DEMO  
This is under normal operating conditions.  
This is just for advertising to customer in the  
shops. Its setting is same with Movie mode and  
screen is divided by half.  
The INTERNET and NORMAL features become enabled for X-PORT input.  
A19  
Troubleshooting  
Check the following before calling for service.  
No image appears  
G Is the power cord of the  
Check and see if the power cord is connected  
properly to the power outlet.  
display connected?  
G Is the power indicator  
Press the Power button.  
light on?  
G Is the power indicator  
If the display is in power saving mode, try moving  
the mouse or pressing any key on the keyboard to  
bring up the screen.  
flickering?  
Try to turn on the PC  
.
G Do you see an "OUT OF  
RANGE" message on  
the screen?  
This message appears when the signal from the  
PC (video card) is out of horizontal or vertical  
frequency range of the display. See the  
'Specifications' section of this manual and  
configure your display again.  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try again.  
G Do you see a "CHECK  
SIGNAL CABLE"  
message on the  
screen?  
Do you see a "OSD LOCKED" message on the screen?  
G
Do you see OSD  
LOCKEDwhen you  
push MENU button?  
You can secure the current control settings,  
so that they cannot be inadvertently changed.  
You can unlock the OSD controls at any time  
by pushing the MENU button for several  
seconds: the message  
OSD UNLOCKEDwill appear.  
A20  
Troubleshooting  
Display image is incorrect  
G Display Position is  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position icon  
in the on screen display.  
incorrect.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
G On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).(Only for D-SUB input)  
G Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
portrayed.  
Important  
Check Control Panel --> Display --> Settings and see if the frequency or the  
resolution were changed. If yes, readjust the video card to the recommend  
resolution (Only for D-SUB input)  
.
The setting method can differ by computer and O/S (Operation System),  
and resolution mentioned above may not be supported by the video card  
performance. In this case, please ask to the computer or the video card  
manufacturer (Only for D-SUB input)  
.
If the recommended resolution (optimal resolution) is not selected, letters may  
be blurred and the screen may be dimmed, truncated or biased. Make sure to  
select the recommend resolution.  
A21  
Troubleshooting  
Display image is incorrect  
G The screen color is  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true color)  
at Control Panel - Settings.  
mono or abnormal.  
(X-PORT support only 16bits color)  
- White Balanceis performed on black/white  
pattern.  
- Check if the screen is set to normal mode.  
G The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
- Check if the screen is set to normal mode.  
A22  
Specifications  
N1642W/N1642WP  
15.6 inches (39.6 cm) Flat Panel Active matrix-TFT LCD, Anti-  
Glare coating  
Display  
Visible diagonal size: 39.6 cm  
0.252*0.252 mm pixel pitch  
D-SUB Horizontal Freq. 30 - 66 kHz (Automatic)  
Sync Input  
Video Input  
Vertical Freq.  
57 - 63 Hz (Automatic)  
D-SUB support 60Hz only(except Dos mode)  
X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz)  
1360 x 768 (60Hz)  
1024 x 768 (60Hz)  
800 x 600 (72Hz)  
D-SUB Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
X-PORT Signal Input  
Input Form  
X-PORT Connector  
X-PORT Signal  
Max  
Recommend  
VESA 1360 x 768 @60 Hz  
VESA 1360 x 768 @60 Hz  
Resolution  
Plug&Play  
DDC 2B (Only for D-SUB Input)  
:
20W(Typ.)  
1 W  
1 W  
Power  
Consumption  
On Mode  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 38.17 cm / 15.03 inches 38.17 cm / 15.03 inches  
Height 32.39 cm / 12.75 inches 26.03 cm / 10.25 inches  
Depth 19.84 cm / 7.81 inches  
5.67 cm / 2.23 inches  
Net  
Tilt  
2.6 kg (5.78 lbs)  
Tilt Range  
-5˚~ 20˚  
Power Input  
AC 100-240V~ 50/60Hz 0.8A  
Environmental  
Conditions  
Operating Conditions  
Temperature 10˚C to 35 ˚C  
Humidity  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature -20˚C to 60 ˚C  
Humidity  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached ( O )  
Wall-outlet type  
NOTE  
Information in this document is subject to change without notice.  
A23  
Specifications  
N1941W/N1941WP/N1941WE  
18.51 inches (47.0 cm) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
,
Display  
Visible diagonal size: 47.0 cm  
0.30*0.30 mm pixel pitch  
D-SUB Horizontal Freq. 30 - 66 kHz (Automatic)  
Sync Input  
Video Input  
Vertical Freq.  
57 - 63 Hz (Automatic)  
D-SUB support 60Hz only(except Dos mode)  
X-PORT 1440 x 900 (60Hz) 1280 x 720 (60Hz)  
1360 x 768 (60Hz)  
1024 x 768 (60Hz)  
800 x 600 (72Hz)  
D-SUB Signal Input  
Input Form  
15 pin D-Sub Connector  
RGB Analog (0.7 Vp-p/ 75 ohm)  
X-PORT Signal Input  
Input Form  
X-PORT Connector  
X-PORT Signal  
Max  
Recommend  
VESA 1360 x 768 @60 Hz  
VESA 1360 x 768 @60 Hz  
Resolution  
Plug&Play  
DDC 2B (Only for D-SUB Input)  
:
23W(Typ.)  
1 W  
1 W  
Power  
Consumption  
On Mode  
Sleep Mode  
Off Mode  
With Stand  
Without Stand  
Dimensions  
& Weight  
Width 44.84 cm / 17.65 inches 44.84 cm / 17.65 inches  
Height 35.79 cm / 14.09 inches 27.80 cm / 10.94 inches  
Depth 19.84 cm / 7.81 inches  
5.76 cm / 2.27 inches  
Net  
Tilt  
3.1 kg (6.89 lbs)  
Tilt Range  
-5˚~ 20˚  
Power Input  
AC 100-240V~ 50/60Hz 0.8A  
Operating Conditions  
Environmental  
Conditions  
Temperature 10˚C to 35 ˚C  
Humidity  
10 % to 80 % non-Condensing  
Storage Conditions  
Temperature -20˚C to 60 ˚C  
Humidity  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached ( O )  
Wall-outlet type  
NOTE  
Information in this document is subject to change without notice.  
A24  
Specifications  
D-SUB Preset Modes (Resolution)  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
31.468  
31.469  
37.879  
48.363  
47.712  
720 x 400  
640 x 480  
800 x 600  
1024 x 768  
1360 x 768  
70  
60  
60  
60  
60  
3
4
*5  
*Recommend Mode  
X-PORT Preset Modes (Resolution)  
Display Modes (Resolution)  
1
2
800 x 600(72Hz)  
1024 x 768(60Hz)  
1280 x 720(60Hz)  
1360 x 768(60Hz)  
1440 x 900(60Hz)  
3
*4  
5
*Recommend Mode  
Indicator  
LED Color  
MODE  
Blue  
Flicker  
Off  
On Mode  
Sleep Mode  
Off Mode  
A25  
Installing the Wall mount plate (Only for N1941W,N1941WP,N1941WE)  
This monitor satisfies the specifications of the Wall mount  
plate or the interchange device.  
1.Place the monitor with its front facing downward on a soft cloth.  
2.Separate the stand by pushing the PUSH button.  
Good Position  
Bad Position  
Warning:  
You can hurt your finger.  
3. Install the Wall mount plate.  
Wall mount plate(Separate purchase)  
This is stand-type or wall mount type and is  
connectable with Wall mount plate.  
Please refer to the installation guide for more  
details, which is provided when Wall mount plate  
is purchased.LG recommends that wall mounting  
be performed by a qualified professional  
installer.  
Kensington Security Slot  
Connected to a locking cable that can be  
purchased separately at most computer stores.  
A26  
Digitally yours  

HP Hewlett Packard QUICKSPECS KD911A4 User Manual
Intel BX80601950 User Manual
Jenn Air Cooktop CVE1400 User Manual
JVC AV 28E50SK AV 32E50SK User Manual
LG Electronics LG Life Good Computer Monitor E2360T User Manual
Miele KM360G User Manual
MSi 865GM3 User Manual
Panasonic DMR BS750 User Manual
Philips 25GR9660 User Manual
Philips 28PW6420 User Manual