Kuppersbusch USA kc_906 User Manual

User’s guide  
EKE 854.1/804.2/604.2  
KC 906.2  
1
3
1
3
4
17I  
2
38  
0
2
Warranty  
For your information...  
This warranty is extended to the original purchaser and succeeding owners for  Carefully read the information in this manual before you use your appliance.  
products purchased for ordinary home use. It does not cover its use in a  You'll find important information about safety and how to use, maintain and  
commercial situation. Should the appliance be sold by the original purchaser  service your appliance so that it enjoys a long service life.  
during the warranty period, the new owner will continue to be protected until  
the expiration date of the original purchaser’s warranty period. Save your dated  
receipt or other evidence of the installation/occupancy date. Proof of original  
purchase date is needed to obtain service under warranty. The warranty  
Please keep this manual in a safe place and pass it on to new owners for their  
applies even if the owner should move during the warranty period.  
information and safety.  
KÜPPERSBUSCH does not assume any responsibility for consequential or  
incidental damages. This warranty provides you with certain legal rights. You  
may also have other rights which may vary from state to state.  
If you experience any problems, first be sure to read the chapter titled “What  
to do if trouble occurs...”. Usually it's easy to solve minor problems yourself  
and avoid unnecessary service costs.  
The following symbols are used in this operating manual:  
The warning triangle will alert you about possible health risks or things  
that can cause potential damage to your appliance.  
[
What Is Covered  
You'll find useful hints and information when you see this symbol.  
F
For one full year from the date of the original purchase, we will provide parts,  
service and labor in your home to repair or replace any part of the cook top  
that fails because of a defect in materials or workmanship. This service is  
provided free of charge. All warranty service will be provided by our authorized  
Customer Care professionals during normal business hours.  
Content  
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   3  
Disposing of the packaging and the old appliance . . . . . .   3  
For your information.... . . . . . . . . . . . . . . . . . . . . . . . . .   3  
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4  
Before using the first time. . . . . . . . . . . . . . . . . . . . . . .   4  
Your appliance at a glance  . . . . . . . . . . . . . . . . . . . . . .   5  
What Isn’t Covered  
1. Service by an unauthorized agency will not be reimbursed. Likewise, the  
warranty doesn't cover any damage or repairs due to service performed by  
an unauthorized agency, or by the use of unauthorized parts.  
2. Service visits to teach you how to use the appliance.  
3. Service visits to correct the installation. You are responsible for providing  
electrical wiring and other connecting facilities.  
Using the cook top . . . . . . . . . . . . . . . . . . . . . . . . . . . .   5  
Sensor sensivity reset  
4. Reset circuit breakers or replace home fuses.  
Switch on a cooking zone (Stand-by-mode)  
The cooking setting  
Switching off a cooking zone:  
Switching off the cooking surface  
Using the automatic boost function  
Frying or dual-circuit cooking zone  
Cooking zone heating indicator  
Child proof lock (sensor-lock)  
5. Damage resulting from accident, alteration, misuse, improper installation,  
abuse or installation not in accordance with local electrical codes, or  
improper storage of the appliance.  
6. Repairs due to other than normal household use.  
Disposing of the packaging and  
the old appliance  
Be sure to dispose of the transport packaging properly. Disposal should not  
have a negative impact on the environment. Recycling the packaging saves  
raw materials and reduces the amount of waste.  
Time limit function (holiday function)  
What happens if...  
Selecting pots and pans . . . . . . . . . . . . . . . . . . . . . . . .   8  
Cleaning and care  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   9  
Please note the information for the cleaning scraper  
Cleaning the cooking surface  
Be sure to dispose of your old appliance properly, as well. Even if it can no  
longer be used, it still contains useful materials. Before discarding an old  
appliance, disconnect the power cord to prevent it from becoming a hazard.  
Remove caking  
Care of the cooking surface  
What to do if trouble occurs... . . . . . . . . . . . . . . . . . . . .   9  
After Sales Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
For technical information and/or  
replacement parts, please contact the  
Küppersbusch Customer Care line  
at  
1-800-459-0844  
For the most efficient assistance,  
please have the Model and Serial  
numbers for the appliance available.  
KC 906.2 and EKE Users Guide USA  
3
Safety instructions  
The cooktop must be built into a countertop opening! Do not use the  
appliance if it has not been installed!  
The connecting cable must not come in contact with the hot cooking  
surface.  
Be sure the appliance is properly installed and grounded by a  
qualified technician.  
Don’t switch the cooking surface on unless you’re using it for cooking.  
Never use a cooking zone without a pot or pan set on it. Never use the  
appliance to heat a room!  
The appliance may only be installed and connected to the power  
supply, maintained, and repaired by a qualified electrician in  
accordance with safety regulations. Do not repair or replace any part  
of the appliance unless specifically recommended in this manual.  
Work performed incorrectly puts your safety at risk.  
Never leave the cooking surface unattended at high heat settings.  
Boilover can cause smoking and greasy spillovers that may ignite.  
Wear proper apparel. Loose-fitting or hanging garments should not  
come in contact with the cooking surface.  Dish cloths, potholders  
and aprons should not be stored near the surface units.  
This appliance is for residential use only. Use for any other purpose  
is at the owner’s risk and could be dangerous. The manufacturer  
can’t be held responsible for damage caused by improper use of this  
appliance.  
To reduce the risk of burns, ignition of flammable materials, and  
spillage due to unintentional contact with the untensil, the handle of  
an utensil should be positioned so that it is turned inward, and does  
not extend over adjacent surface units.  
Danger of burning! The cook top becomes hot  
during operation. CAUTION! Keep children away  
from this appliance.  
Use only dry potholders. Moist or damp potholders on hot surfaces  
may result in burns from steam. Do not let potholder touch a hot  
surface. Do not use a towel or other bulky cloth.  
CAUTION! Items of interest to children should not be stored in cab-  
inets above a cooktop. A child can be seriously injured by climbing  
on a cooktop to reach them.  
CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthenware,  
or other glazed utensils are suitable for range-top service without breaking  
due to the sudden change in temperature. Follow the manufacturer’s in-  
structions!  
Do not leave children alone - children should not be left alone or un-  
attended in area where appliance is in use. They should never be  
allowed to sit or stand on any part of the appliance.  
Do not place non-food items on the cooking surface when it's hot.  
Do not touch the cooking surface or areas near it. The cooking  
surface may be hot even though it’s dark in color. Areas near it may  
become hot enough to cause burns. During and after use, do not  
touch the surface, or let clothing or other flammable materials come  
in contact with it until it had time to cool.  
Be careful when working with attachments! The connecting cord  
must not come in contact with the hot cooking surface.  
Do not put plastic on the cooking surface. Things that can melt  
(i.e. plastics, foils or sugar), must be kept away from the cooking  
surface. Be sure to immediately remove or lift off any melted  
item from the hot cooking surface. Use the supplied cleaning  
scraper in order to avoid damage to the cooking surface.  
Use proper pan size - This appliance is equipped with some surface  
units of different size. Select untensils habing flat bottoms large  
enough to cover the surface unit heating element. The use of  
undersized utensils will expose a portion of the heating element to  
derekt contact and may result in ignition of clothing. Proper  
relationship of utensil to burner wil also improve efficiency. See also  
„Selecting pots and pans“ on page 8.  
Flammable materials should not be stored near surface units.  
Do not place combustible or inflammable objects upon the cooking  
top which might be dangerous in case of unintentional switching on.  
Clean and remove any burned-on materials. Don’t heat these  
materials repeatedly.  
If a wet sponge or cloth is used to wipe spills on a hot cooking area,  
be careful to avoid steam burn. Some cleaners can produce noxious  
fumes if applied to a hot surface.  
Lime deposits are harmful to the cooking surface.  
Please follow the cleaning and maintenance instructions carefully!  
Protective liners – Do not use aluminium foil to line surface unit drip  
bowls. Improper installation may result in a risk of fire.  
Before using the first time  
 Before using the appliance the first time, be sure to clean the cooking sur-  
face with a mixture of water and mild detergent on a clean cloth. Then wipe  
the surface dry with a non-fluffy cloth.  
The glass ceramic surface is very durable and can easily withstand  
light to medium impacts and loads distributed over large areas. Be  
sure to avoid concentrated loads (i.e. spice bottles) from falling on  
the surface to avoid cracking or breaking the cooking surface.  
CAUTION! If the cooking surface becomes cracked or fractured, quit  
using the appliance immediately. Disconnect the power and call  
Customer Service. Cleaning solutions and spillovers may penetrate  
the broken cooktop and create a risk of electric shock.  
Never flambé under the cooker hood - the fat in the filter can  
ignite!  
CAUTION! Overheated greases and oils may ignite themselves.  
Prepare meals with greases and oils very carefully and control the  
heat. Should fats or oils ignite, do not use water to extinguish them!  
Smother fire or flame or use dry chemical or foam-type extinguisher.  
4
KC 906.2 and EKE Users Guide USA  
Your appliance at a glance  
Using the cook top  
[
Read the safety instructions!  
EKE 854.1  
KC 906.2  
Sensor sensivity reset  
Important:  
There must be no objects on the sensors while the sensor sensitivity is  
being set.  
After initial connection and after a power failure the abbreviations  
F
'%0” appears briefly in the LED displays. Then rotating circles are dis-  
played. This means that the sensors are being checked in a self-test and  
at the same time the button sensitivity reset.  
 Acknowledge this display by touching the Off-sensor.  
Be sure that no objects are lying on the sensors! These symbols are  
switched off immediately.  
 Otherwise remove objects and disconnect the cooking zone again briefly  
from the main power source.  
EKE 804.2  
Switch on a cooking zone (Stand-by-mode)  
If you start to use a cooking zone, the cook top must be first set into the  
stand-by mode before you can activate the cooking zone.  
F
When you turn the cooking surface on, you will hear a short buzzing noise  
as it heats. This is design-specific and does not affect the quality and  
operation of the appliance.  
F
 Press the sensor-button for  
approx. 2 seconds.  
The LED-display above the sen-  
sor lights up and the appliance  
is in operation (stand-by mode).  
EKE 604.2  
The stand-by mode automatically switches itself off,  
 if no cooking zone is activated within 20 seconds (after 10 seconds an  
acustic signal indicates that the appliance switches itself off after another  
10 seconds)  
or  
 if the appliance is not used 1 minute after starting operation.  
The cooking setting  
You have 9 cooking settings available.  
Cooking setting  
Suitable for  
1-3  
4-5  
6-8  
9
Heating, warming, browning, defrosting  
Steaming, poaching, boiling  
Roasting, deep-frying  
1
2
3
4
5
6
7
8
Dual circuit cooking zone  
Sensor buttons for cooking settings  
Off-sensor  
Heating large quantities  
Stand-by-Sensor  
Child proof lock (sensor-lock)  
Normal cooking zone  
Select the required cooking setting with the plus- or minus-sensor. It will be  
indicated in the display.  
Normal cooking zones, usably as a frying zone  
Frying zone  
Using the minus-sensor, you start with a boost. If you use the plus-sensor,  
you start without a boost.  
KC 906.2 and EKE Users Guide USA  
5
When pressing the plus-sensor  
the cooking zone starts at cooking  
setting 5, without boost.  
Using the automatic boost function  
All cooking zones are equipped with an automatic boost function. Maximum  
power is used for the boost. The time period of the boost depends on the  
selected cooking setting. After the elapsed time the cooking zone automatically  
switches back to the selected cooking setting.  
If the cooking zone is yet not in use  
 Press the minus-sensor until the  
required cooking setting is dis-  
played, the boost function  
When pressing the minus-sen-  
sor the cooking zone starts at  
cooking setting 9.  
switches on automatically.  
This automatically starts the  
automatic boost.  
During automatic operation a “A”  
lights up in the display alternately  
with the selected cooking setting.  
Switching off a cooking zone:  
If you already use the cooking zone  
 Press the plus-sensor again  
after reaching cooking setting 9.  
The automatic boost function is  
activated.  
and  
2 X  
Press the plus- and minus-sensor at the same time.  
Select the required cooking set-  
ting.  
The “0” position is visible for about 2 seconds after the appliance switches off.  
Switching off the cooking surface  
“A” lights up in the display alter-  
nately with the selected cooking  
setting.  
All the cooking zones can be  
switched off quickly with the Off-  
sensor.  
6
KC 906.2 and EKE Users Guide USA  
Frying or dual-circuit cooking zone  
Child proof lock (sensor-lock)  
As a rule, only the smaller cooking zone diameter is heated. However, when  Operating the sensor lock detains unauthorised persons from using the appli-  
using frying pans and large saucepans, you may decide to switch on the outer  ance. In order to activate this lock the cooking area has to be in operation.  
cooking zone circuit.  
Switching the frying or dual-circuit zone on:  
Activating child proof lock:  
 Press the cooking zone symbol  
next to the plus/minus-sensor.  
A dot at the bottom right of the  
display for the cooking level in-  
dicates that the function has  
been switched on.  
Press the sensor lock (2 seconds).  
The child proof lock can be activat-  
ed if the cooking area is in opera-  
tion. In this case you can only  
choose a lower cooking setting or  
switch off.  
 Pressing the cooking zone sym-  
bol once again deactivates the  
dual circuit cooking zone or fry-  
ing zone.  
The lock is indicated by 3 flashing control indicators. .  
Model EKE 854.2 and KC 906.2 only:  
To heat a frying pan you can use the two small,  
closely adjacent cooking zones. The temperature  
must be controlled via the setting controls for both  
cooking zones. We recommend to set both cooking  
zones at the same cooking level.  
Be careful: Switching off the cooking area does not deactivate the lock!  
Deactivating the child proof lock:  
at once,  
after max. 3 Sek.  
Cooking zone heating indicator  
As long as the cooking zone is still hot, an “H” will  
appear in the display when the cooking zone has  
been switched off.  
Press the sensors under the two left flasing control indicators at once.  
After not more than 3 seconds press the sensor under the flashing control  
indicator on the right.  
Note: When the power supply has been interrupted the child proof lock is no  
longer active.  
KC 906.2 and EKE Users Guide USA  
7
Time limit function  
Selecting pots and pans  
The appliance is equipped with an automatic time limit function. This function  
makes sure that the appliance is not in operation for a long time. The time  
period of the time limit depends on the selected cooking setting, eg.: The high-  
er the selected cooking setting, the faster the appliance is switched off.  
CAUTION! Only certain types of glass, glass/ceramic, ceramic, earthen-  
[
ware, or other glazed utensils are suitable for range-top service without  
breaking due to the sudden change in temperature. Follow the manufac-  
turer’s instructions!  
You can save time and power by using ideal pots and pans.  
Use pots and pans with flat, smooth bottoms.  
Uneven bottom surfaces can increase the amount of time needed to start  
the cooking process and increase energy usage.  
Cooking setting  
9
8
7
6
Switching off time after  
1 hours  
5
4
3 hours  
4 hours  
3
2
5 hours  
Rough pan bottom surfaces will scratch the glass-ceramic cooking area  
when moved around.  
1
10 hours  
Use a pan with a diameter at least as large as the cooking area.  
Using an undersized utensil will expose a portion of the heating element to  
direct contact and may result in ignition of clothing.  
The function to limit operation time works separately for each cooking zone..  
What happens if...  
...pressing two or more sensor keys – at the same time e.g. when a  
pan is mistakenly put onto the sensor key?  
No function is activated. An audible signal sounds after 10 seconds. The  
appliance switches off automatically after 20 seconds.  
...you continue to press a sensor button even after having set the  
highest cooking setting?  
An audible signal sounds after 10 seconds. After 20 seconds the appliance  
switches off automatically.  
Wherever possible, always place a lid on the pan.  
You’ll save a lot of energy by cooking in a closed pan. Liquids and foods  
will only boil over if the temperature is too high. The cooking zones allow  
you to precisely set the temperature required. With a little practice, you’ll  
learn how to choose the perfect cooking settings so nothing will boil-over  
even when a lid is in place!  
...there is a power outage?  
The appliance does not automatically switch on again. If the child proof lock  
was activated before the power failure, this is now deactivated.  
...the electronics overheat?  
The cooktop will switch off. All 4 LED indicators will flash and a cyclical  
signal will be heard.  
8
KC 906.2 and EKE Users Guide USA  
Cleaning and care  
What to do if trouble occurs...  
Sugar and food containing sugar (i.e. marmalade) and melted plastic  
Never unscrew the appliance! Repairs may only be carried out by a  
qualified technician!  
[
[
must immediately be removed from the hot cooking surface with the  
cleaning scraper. If not, the cooking surface can be ruined while it’s  
cooling down.  
However, there are some problems that you can handle yourself. First, check  
and see if there have been any operating errors. Remember – repairs during  
the warranty period are not free of charge if they are caused by operating er-  
rors or non-observance of the following instructions:  
Steam and/or pressure cleaning machines can’t be used to clean the  
appliance! This can damage the unit, resulting in the risk of personal  
[
injury.  
Fault  
Cooking surface can’t be  Regulator or electronic  See below: “What is to be  
switched off. component is defective. done if...”  
Possible cause  
Remedy  
Risk of burning! Make sure the appliance has cooled down before  
[
cleaning. If a wet sponge or cloth is used to wipe spills on a hot surface,  
be careful to avoid steam burn. Some cleaners can produce noxious  
fumes if applied to a hot surface.  
The LED indicator for the  LED indicator defective. Call customer service.  
cooking level or heat indica-  
Risk of burning, as there  
is no temperature warn-  
ing.  
[
Please note the instructions regarding cleansers.  
tor does not light up or only  
partly lights up.  
[
Clean the cooking surface after every use. Food residue that hasn’t been  
removed will burn into the surface the next time it’s turned on and then  
these incrustations may be permanent.  
F
Circulating dash symbols on  No faults; normal dis- If no objects have been lying  
all 4 LED displays.  play after power inter- on or obstructing the sen-  
ruption.  
sors, confirm this by pressing  
the Off-sensor.  
Cleanser residues can cause discoloration the next time you turn on the  
F
cook top. Cloths and sponges that have been used to clean other  
surfaces can cause discoloring, too.  
Horizontal dashes that are  Failure of electronic  Switch off the fuse. Call Cus-  
shown on the display run- component.  
ning from top to bottom.  
tomer Service.  
VSR O-FIX-C is the perfect cleanser for glass ceramic. You can get it from  
KÜPPERSBUSCH Customer Service.  
F
Cooking area does not heat. Fuse is defective.  
Check the fuse and replace, if  
neccessary.  
Do not use any  
- aggressive or bleaching cleaning agents that contain active oxygen, chlorine  
or corrosive components.  
Child proof lock  
activated.  
Deactivate child proof lock.  
Cooking area is defec- Call Customer Service.  
tive.  
- abrasive or aggressive cleaning or scouring agents like steel wool, soap-filled  
steel wool, metal or plastic sponges or similar agents with an abrasive surface.  
Inner circuit of the  
dual-circuit zone is  
defective.  
Do not, under any cir-  
cumstances, continue to  
use the outer circuit  
which is still working! It  
will destroy the glass  
ceramic surface. Call  
Customer Service.  
[
Please note the information for the cleaning scraper  
CAUTION! Risk of cutting! The blade of the cleaning scraper is very sharp!  
[
Always keep the cleaning scraper flat on the  
surface and push the caking away.  
Individual / all sensors do  
not react to touch.  
See below: “What is to be  
done if...”  
Do not scratch the surface with the edge of  
[
the scraper and don’t damage the sealing  
with the edge.  
What is to be done if…  
... one or more sensors don’t react to touch?  
Possible cause: The sensors constantly adapt in sensitivity to ambient  
conditions. Unfavorable conditions such as e.g. if something is laying on a  
sensor, may cause them not to react for several minutes.  
Wait for about 15 minutes or pull the relevant fuse and then re-insert  
it. Repeat this procedure if necessary!  
Cleaning the cooking surface  
 Use the cleaning scraper to remove all food residue and fat splashes from  
the hot cooking surface.  
 When the cooking surface has cooled, clean it with water and a small  
amount of detergent, with a cleanser for glass ceramic surfaces or with  
VSR O-FIX-C. A soft brush or a soft sponge can also be used.  
The keys have adapted and now react to touch again.  
... one or more sensors don’t react to touch despite repeating this  
procedure?  
Possible cause: Faulty sensor key or component.  
 Wipe off the surface with clear water.  
 Dry it thoroughly.  
If you’ve repeated the procedure and the keys still don’t react, pull the  
fuse again and then contact our Customer Service.  
Remove caking  
Heavy food residue should be soaked first. Use a wet cloth for best results. It  
will be easier to remove the food residue.  
Care of the cooking surface  
Clean the glass ceramic surfaces with a cleanser to protect it from discoloring,  
and reduce the danger of damage from sugar. It can also remove stains and  
discoloration  
KC 906.2 and EKE Users Guide USA  
9
After Sales Service  
In the event of a problem that you can’t easily fix yourself, or for spare part  
service, please contact the Küppersbusch Customer Care line at  
.1-800-459-0844  
Always have the information from the identification panel handy when  
calling Customer Service.  
F
The panel is located on the underside of the cook top and on the cover page  
of this manual.  
Production number  
Model  
10  
KC 906.2 and EKE Users Guide USA  
KC 906.2 and EKE Users Guide USA  
11  
KÜPPERSBUSCH  
112 N. East Street, Suite C  
Tampa, Florida 33602  
Telephone: 813-229-7096 Fax: 813-229-0982  
Customer Care line: 1 - 800 - 459 - 0844  
KÜPPERSBUSCH is a brand of Teka USA, Inc.  

Intel Computer Hardware Motherboard User Manual
JVC DR MV78BU User Manual
Lindy 51236 User Manual
Miele CS1028 User Manual
NEC MultiSync EA231WMi User Manual
Philips 28PT7108 User Manual
Philips 170V6FB User Manual
Philips BDL4221VS User Manual
Philips Color External Monitor EM43 User Manual
Philips PAC131 User Manual