Kodak DIRECTVIEW DV3MC User Manual

Kodak DirectView  
3MP Color Display  
Model# DV3MC  
CAT 802 6635  
Contents  
Thank you for purchasing our Color LCD Monitor.  
1.Safety Precautions .................................3  
2.Auxiliaries...............................................7  
3.Features .................................................8  
4.How to Operate ......................................9  
5.Connection Method ..............................13  
6.Reference.............................................16  
7.Assignment of Connector Pins.............17  
8.Failure Diagnosis..................................18  
9.Cleaning ...............................................19  
10.Specifications .......................................20  
11.Technical Support .................................22  
Carefully read this User's Manual and use the  
product properly. Before using it, also read  
"Safety Precautions."  
Keep the User's Manual as close to you as  
possible and in safe custody.  
If you have lost the manual, contact your dealer.  
We will reissue a manual.  
Safety Precautions  
Attention, Consult accompanying documents  
Dangerous Voltage, Risk of electric shock  
To reduce the risk of electric shock, Do not remove the back cover.  
No-user serviceable parts inside, Refer to qualified service Personnel.  
FCC Information  
CE Certification  
This device complies with the  
requirements of the MDD directive  
93/42/EEC "Medical Device  
Directive".  
FCC (U.S.Federal Communications Commission)  
This equipment has been tested and found  
to comply with the limits for a Class A digital  
device, pursuant to part 15 of the FCC Rules.  
These limits are designed to provide reasonable  
protection against harmful interference in a  
residential installation. This equipment  
generates, uses, and can radiate radio frequency  
energy, and if not installed and used in  
accordance with the instructions, may cause  
harmful interference to radio communications.  
However, there is no guarantee that interference  
will not occur in a particular installation. If this  
equipment does cause unacceptable inter-  
ference to radio or television reception, which  
can be determined by turning the equipment off  
and on, the user is encouraged to try to correct  
the interference by one or more of the following  
measures:  
Warning  
- This apparatus must be earthed because of  
Class I equipment.  
- This apparatus is no patient contact equipment.  
- When using at 240 V in United States,  
supply must be from center-tapped, 240 V,  
single phase circuit.  
- Please consult with the dealer from whom you  
purchased it about waste disposal.  
- This equipment shall not to be used around the  
patient vicinity, which is the space with surfaces  
likely to be contacted by the patient or an  
attendant who can touch the patient.  
This encloses a space within the room 1.83 m  
(6 feet) beyond the perimeter of the bed in its  
intended location, and extending vertically 2.29  
m (7-1/ 2 feet) above the floor.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the  
equipment and receiver.  
- Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
Equipment Classification  
- Type of protection against electric shock:  
Class II equipment  
- Consult your dealer or an experienced  
radio/TV technician for help.  
- Protection against harmful ingress of water :  
Ordinary Equipment (IPX0)-No protection.  
- Not suitable for use in the presence of a flammable  
anesthetics or oxygen.  
FCC Warning:  
To assure continued FCC compliance, the  
user must use a grounded power supply cord  
and the provided shielded video interface cable  
with bonded ferrite cores. Also, any unauthorized  
changes or modifications to this monitor would  
void the user's authority to operate this device.  
- Mode of operation: Continuous operation  
The Responsible Party located  
within United States  
U.S.ELECTRONICS, INC.  
Tel:1-888-926-2605  
- 3 -  
Follow the instructions below for safety use of the color LCD monitor.  
-Read this user’s manual and properly use the unit.  
-You must agree that Kodak is not liable for any damage caused by any third party’s or your  
negligence of following the instructions of this user’s manual and misuse except those specified  
responsibilities for compensation accepted by law.  
●Symbols  
-This user’s manual contains various symbols to  
Person could be at risk of severe  
guide users to properly use the product.  
injury or death.  
-The contents in each box below express the events  
Warning  
that will occur following neglects of signs and  
Person or properties could be at risk  
of injury or damage.  
misuse.  
-Confirm the contents shown here and then read  
this manual carefully.  
Caution  
●Meaning of symbols  
expresses DO NOT.  
expresses MUST DO.  
Cautions when setting up  
Do not place the unit where it  
is subject to direct sunlight or  
near any heating device.  
The cabinet and/or components  
may be damaged, which may  
cause generation of fever and  
ignition.  
Do not put the unit on  
unstable places (on a wonky  
table and inclined place),  
which might cause injuries  
arising from its dropping or  
falling.  
Caution  
Cautions when using  
Do not put any metal materials or  
flammable foreign objects into the unit  
(from vent holes).  
It may lead to electric shock and/or  
fire.  
Do not put the unit in such place  
where it has bad air circulation,  
dust, humidity, oily smoke and  
steam.  
Warning  
It may lead to fire.  
In case that any object mentioned  
above is placed inside, mmediately  
turn off the power, disconnect the  
plug from outlet, and contact hops.  
Scratching or hitting with hard objects Do not place any container filled with  
may break the unit.  
water or any chemicals near the unit.  
In case of containers falling down,  
liquid may permeate inside and  
insulation failure may occur, which  
may lead to electric shock.  
In case of any liquid entering  
inside, immediately turn off the  
power, disconnect the plug from  
outlet, and contact shops.  
Do not use the unit turned over on its  
back, pushed on its side, or  
upside down.  
These may lead the fever that  
the unit generates to pile up  
inside the unit, which may  
lead to generation of fever  
and ignition. Also, falling may  
cause injuries.  
Caution  
- 4 -  
Do not use the attached AC adapter to  
other devices (models with attached AC  
adapter).  
Do not put the unit in such place where  
it is subject to direct sunlight or near  
any heating device.  
It may lead to generation of fever and/or  
fire. Also, do not use any other AC  
adapter to this unit.  
The cabinet and/or  
components may be  
damaged, which may cause  
generation of fever and  
ignition.  
Caution  
During a long-hour use, take a break 10 to 15 minutes every one hour for your eyes.  
Otherwise, it may cause eyestrain.  
Abnormal circumstances  
In case of any abnormality such as odor,  
In the event of thunder, immediately  
turn off the power and disconnect  
the plug from outlet.  
Lightning strikes may cause  
electric shock and/or fire.  
sound, and overheat taking place,  
immediately turn off the power  
and disconnect the plug from  
outlet.  
Warning  
Continuance of using the unit  
under such condition may lead to  
electric shock and/or fire. Immediately turn  
off the power, disconnect the plug from  
outlet, and contact shops.  
In the event of broken panel and leaking liquid crystal, do not inhale,  
swallow, or touch the liquid crystal.  
It may cause you getting poisoned and/or having a skin irritation. If you put  
it in your mouth, immediately gargle with water and go to see a doctor to  
get a checkup. In case of taking it on your skin and/or cloth, wipe it off with  
alcohol and rinse them.  
Warning  
Maintenance  
Do not remove the cabinet.  
Do not remodel or repair.  
It may lead to fire, electric shock,  
or injuries.  
There are high-voltage parts inside  
that may lead to electric shock.  
Ask shops for adjustments  
and inspection.  
Warning  
Caution  
Clean inside the monitor once a year.  
The dust inside the unit may lead to fire.  
Ask shops for adjustments and  
inspection.  
Disconnect the plug from outlet when  
not using the unit for a prolonged  
period.  
Disconnect the plug from outlet  
when not using for a prolonged  
period for such as trip.  
- 5 -  
Notes  
●Even if the unit is properly used, it may have an effect on radio and/or TV reception upon the  
condition of electric wave. If it is the case, give caution to the followings.  
1) Ensure enough space between the unit and radio and/or TV.  
2) Connect the unit and radio and/or TV to separate outlets.  
●Color LCD monitor may have tiny spots and unevenness according to the displaying  
conditions, but they are not any sign of failure.  
●LCD panel is produced with high-definition technology, but there may be some imperfect  
displaying pixels (lacking, constant lighting).  
●When placing LCD panel near windows or outside for a long period of time, give caution to it;  
sunlight may cause damage on the panel.  
●Do not give LCD panel a strong push, scratch it, or place any object on it. It may cause LCD  
panel failure.  
●When using the unit in a cold place, you will see images leave traces or a dark screen, but it is  
not a failure. It will go back to the normal state as temperature rises.  
●Do not display still pictures for a long period of time, which may cause afterimages.  
●The minimum state of the brightness adjustment may make images difficult to see.  
●The quality of computer signals may have an effect on the unit’s quality. We recommend you to  
select computers with high-quality video signal output.  
●Instantaneous voltage change  
This unit may have defects upon momentary voltage drops of power supply caused by incidents  
such as lightning strikes. For the countermeasure for it, we recommend you to use devices such  
as uninterruptive power supply.  
Disposal of the unit  
Do not dispose of the unit with general wastes.  
Do not dispose of the unit together with general wastes.  
The unit contains mercury in its CCFT(Cold cathode fluorescence tube). Follow your local regulations  
or rules upon disposal of the unit.  
Limitation of Liability  
●Kodak is not liable for damages arising from fire, earthquake, actions taken by any third party, any  
other accident, any intended action, negligence, or misuse by user, or use under such abnormal  
circumstances.  
●Kodak is not liable for incidental damages (including, but not limited to, loss of business  
profits, disruption of buisiness, change or loss of saved data) arising from use of this product or inability  
to use this product.  
●Kodak is not liable for damages arising from use not described in the user's manual.  
●Kodak is not liable for damages arising from malfunctions caused by combination of  
connecting devices.  
●Kodak is not liable for damages (concerning time limit or buisiness, reduction or delay of  
profits, information, and other economic hardship) arising from use of software provided by Kodak  
for use of this product, even if Kodak has been advised of the possibility of such damages.  
- Windows and MS-DOS are registered trademarks or brands of Microsoft Corporation within the United States and in  
other countries.  
- VESA is a brand of Video Electronics Standard Association.  
- DirectColorCal is a registered brand of Eastman Kodak Company.  
- The names of companies and products are registered brand names or brand names.  
- 6 -  
Auxiliaries  
Confirm the auxiliaries listed below are included.  
AC adapter  
Power supply cord (3P wall type)  
DVI-DVI cable  
1
1
1
1
USB cable  
User’s Manual (this manual)  
1
1
Communication cable  
NOTES  
We recommend you to keep the packing box for transportation and the like.  
In case of transporting and packing the unit in the packing box, carefully place it, keeping its  
panel from touching any objects.  
- 7 -  
Features  
●Use of a 20.8-inch (53cm) QXGA ultra-high-definition color LCD panel  
A large screen size and clear image is obtained by using a 20.8-inch (diagonal 53cm)  
QXGA (2048 x 1536 ) ultra-high-definition color LCD panel.  
Note  
To display the maximum resolution on DV3MC, a graphics card that can display 2048 x 1536  
or 1536 x 2048 is necessary.  
●High-intensity, high contrast  
The 3 million pixels for displaying various medical images can be displayed at "high-resolution,"  
"300:1 high contrast" and "wide viewing angle."  
Maximum brightness: 160cd/m2  
120cd/m2 (when the brightness stabilizing circuit is operating)  
Viewing angle: ± 85 degrees both vertically and horizontally  
●DVI (digital visual interface)  
Employing DVI (digital visual interface) has achieved less deterioration of video signal  
and high-definition image display, compared to conventional analog interfaces.  
●Brightness stability  
In order to restrain the brightness drift arising from the LCD backlight, the unit is installed  
with our unique automatic brightness stabilizing circuit (λ-Sentinel).  
As a result, the brightness drift is held down following introduction of power.  
Thus stable brightness is observed over a long period of time.  
●Calibration function  
With the optional color sensor and DirectColorCal software, luminance and gradation  
(gamma curve) of the color LCD monitor can automatically be calibrated.  
●Portrait/landscape orientation  
The LCD panel can be rotated by 90 degrees from portrait to landscape orientation.  
The display switch between portrait and landscape is made by internal hardware rotation function.  
●Power management  
This unit has loaded the power management system. The power management mode functions  
when either horizontal or vertical signals or both disappears, and it reduces power consumption  
to less than 10W.  
●VESA standard wall/arm mountings  
The units is compliant with VESA's 100mm-pitch hanging tools. The tilt stand is detachable;  
the unit can be set according to users' environment such as arm mounting.  
Caution  
-Portrait display is available only when a graphics card can display 1536 x 2048.  
-When the monitor is used as a suspention type, please use a hanging arm able to support a  
monitor weighing 10kg. or more.  
●Obtaining standards  
The product observes worldwide medical standards such as UL2601-1.  
- 8 -  
How to Operate  
1. Names and Functions of Each Part  
Operating Section  
Power switch  
This turns the power of the color LCD monitor ON and OFF.  
Power indicator  
No.  
1
LED Status  
OFF  
Power Status  
OFF  
Color LCD Monitor Status  
Power is OFF  
2
The brightness stabilizing circuit is ON and  
the brightness is stable  
ON  
3
4
The brightness stabilizing circuit is ON and  
the brightness is being adjusted  
Green lamp  
is lit  
ON  
ON  
Orange lamp is lit  
Power saving mode  
- 9 -  
Connection Section  
Portrait (shorter side at the top)  
Left side view  
USB upstream port  
Connect this port to the upstream connector from the computer. For the connection, use a USB  
cable 2 meters or shorter in length.  
USB downstream port x 2  
Connect the ports to USB devices (a MOUSE, etc.) with a maximum current consumption of no  
greater than 100mA per port.  
Connect the color sensor when you operate color calibration.  
DC power connector (DC IN 12V)  
Connect the attached AC power adapter to the +12VDC power source connector.  
VIDEO input connector (SIGNAL)  
Connect a signal cable to the graphics board's digital video signal (DVI) connector.  
REMOTE IN connector REMOTE OUT connector  
Used to control serial communication for such as brightness calibration.  
Photo sensor connector  
This connector is not used.  
Caution  
The and USB hubs are bus-powered types. These do not require external power  
supply and are for connecting to equipments with little dissipation power like a mouse.  
- 10 -  
2. Adjusting the Display Angle  
The screen angle can be arranged by up to 70 degrees either to the right or left, bent down by up to 3  
degrees and bent up by up to 17 degrees. As indicated in the drawing below, the adjustment is con-  
ducted by holding the color LCD display in both hands and slowly moving it.  
17 degrees  
70 degrees  
70 degrees  
3 degrees  
Caution  
Be careful not to catch your fingers when adjusting the angle holding the bottom of the LCD  
panel and turning the panel.  
- 11 -  
3. Rotating the LCD Panel  
 When setting the color LCD monitor to horizontal display (landscape orientation), lift the LCD  
panel to the top of the tilt stand as shown in the figure below and rotate it by 90 degrees.  
Procedure  
Tilt the LCD panel upward. (Perform this procedure before sliding the panel upward.)  
Lift the LCD panel to the top (The tilt stand will slide about 60mm.).  
Rotate the LCD panel by 90 degrees.  
Replace the LCD panel to the bottom while in the horizontal position (landscape orientation).  
- 12 -  
Connection Method  
1. Confirm that the computer is turned off.  
2. Connect the computer’s DVI digital video output connector and the LCD monitor's "SIGNAL" with the  
provided cable. When connecting the cable, do not forget to tighten the screw of the cable.  
3. Connect the DC output connector of the attached AC adapter to the LCD monitor's "DC IN 12V" and  
the power plug to an inlet.  
4. Turn on the LCD monitor and computer. Confirm that the monitor displays images.  
Example of Connection  
 
�  
��  
 
 
 
 
 
�  
� �  
 
�  
Caution  
Make sure you use the auxiliary AC adapter.  
13  
- 13 -  
Handling the cable cover  
1. Removing the cable cover  
Lifting the hook at the top of the cover, slowly remove the cable cover and expose the cable holders.  
Hook  
Cable cover  
2. Installing the cable cover  
Secure cables to the cable holders on the back  
of the stand. (Refer to the figure on the right)  
Install the cable cover.  
It is free to arrange cable settings according to  
environment.  
Caution  
●Do not give signal cables or the  
power cord a strong pull.  
 
●A strong pull may cause damage on  
the connection part inside the  
�  
monitor where high-definition  
processing technology is applied. It  
also may result in felling the monitor  
and damaging on the LCD panel. In  
the worst-case scenario, the LCD  
panel will be broken.  
 
- 14 -  
Antitheft security device slot  
This product has loaded an antitheft security device slot compliant with MicroSaver Security System of  
Kensington on the back of the color LCD monitor. MicroSaver security System can be purchased at PC  
supply shops.  
Antitheft security device slot  
* Kensington is a registered brand of Kensington.  
- 15 -  
Reference  
DDC*1  
This unit has loaded a function compliant with DDC-2B, a VESA standard.  
This function reads into the set data written in the color LCD monitor internal device in advance  
on startup of Windows95/98/Me/2000 or WindowsXP and sets the detailed information of the  
color LCD monitor in the system file in order to achieve Plug&Play.  
Data reading from the color LCD monitor is done through a video signal cable, which needs to  
be connected when Windows95/98/Me/2000 or WindowsXP is on.  
*1DDC(Display Data channel)  
Note  
Power Management  
What is power management?  
This is the function that truns off the screen by detecting input signal change to reduce consumption  
current for power saving.  
Setting  
Refer to the user's manuals of your computer and display drivers for power management settings and  
time-settings for mode change.  
Using Digital Input  
When using DVI digital input signal, under the process of closing connected system or changing  
resolution, noise will be seen. This is not a color LCD monitor failure. Pulling out or plugging into the DVI  
cable during DVI digital input use may lead to failure of the display driver on the system. Pull out or plug  
into the DVI cable when the system is off.  
Adjustments of Luminance and Chromaticity  
DV3MC does not have an OSD (adjustment button). If you need to make adjustments on luminance and  
shades of color, connect DV3MC and your computer with the attached serial communication cable  
(RS-232C) and install “DirectColorCal.”  
* For details, refer to the user’s manual in the DirectColorCal CD-ROM.  
If you wish to make adjustments on color temperature, gamma, and luminance, please purchase an  
optional calibration kit.  
- 16 -  
Assignment of Connector Pins  
Pin #  
Signal  
T.M.D.S. Data2-  
24-pin DVI-D Connector (female)  
1
2
T.M.D.S. Data2+  
T.M.D.S. Data2/4 Shield  
T.M.D.S. Data4-  
T.M.D.S. Data4+  
DDC Clock  
3
4
5
6
7
DDC Data  
DIGITAL Signal Connector  
8
NC  
9
T.M.D.S. Data1-  
T.M.D.S. Data1+  
T.M.D.S. Data1/3 Shield  
T.M.D.S. Data3-  
T.M.D.S. Data3+  
+5V Power  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
Ground  
Hot Plug Detect  
T.M.D.S. Data0-  
T.M.D.S. Data0+  
T.M.D.S. Data0/5 Shield  
T.M.D.S. Data5-  
T.M.D.S. Data5+  
T.M.D.S. Clock Shield  
T.M.D.S. Clock +  
T.M.D.S. Clock -  
- 17 -  
Failure Diagnosis  
Check the followings before requesting repair.  
Countermeasure  
Symptom  
Verification  
Power doesn't turn on!  
(POWER indicator doesn't  
light!).  
a: Is the power cord  
connected?  
b: Is the power switch ON?  
a: Connect the power cord (see  
Pg.12).  
b: Turn the power switch on.  
a: Is the signal cable properly  
connected?  
b: Is the POWER indicator  
orange?  
a: Properly connect the  
appropriate signal cable (see  
Pg. 12).  
b: Disengage the power saving  
mode.  
The screen is not  
displayed!  
c: Is the computer on?  
c: Turn the computer on.  
Screen doesn't properly  
display  
a: Is the Graphics card  
properly installed onto the  
computer per the operating  
manual?  
a: Properly install according to  
the Graphics card  
Operating Manual.  
The entire screen is not  
displayed  
a: Is the Graphics card  
properly set up?  
a: Properly set it up according  
to the Exclusive Graphics  
card Operating Manual.  
- 18 -  
Cleaning  
Cleaning the Cabinet and the Color LCD Monitor  
●When cleaning, remove the AC adapter from the color LCD monitor and outlet for  
safety.  
●Lightly wipe off dirt on the cabinet and LCD panel surface with a hard-wrung soft cloth soaked  
in a neutral cleaning solution. Follow its instruction when using a disposable cloth.  
●Do not use thinner, benzine, alcohol or such on the cabinet that is made of plastic. These can  
damage the cabinet, alter its quality and cause the paint to peel off.  
●Do not apply insecticides and other volatile items to the cabinet. Also do not leave rubber and  
vinyl products or such in contact with it for long hours. This can cause the quality to alter and  
the paint to peel off.  
●Cleaners usable for the color LCD panel are isopropyl alcohol (without abrasive),  
non-ammonic glass cleaner, and watered-down neutral cleaning solution. Do not use organic  
solvent such as acetone and toluene.  
●When the display has dust on the color LCD panel surface, wipe it off with soft moist  
cloth.  
●Treat the color LCD panel with care. Do not rub the LCD panel surface with a  
rough item or hit it on the surface. Also, do not strongly press the LCD panel surface. This can  
lead to unevenness in the screen and also to failure of the product.  
*An optional protection filter “MF-002” is available.  
- 19 -  
Specifications  
Product name : Color LCD Monitor  
Model : DV3MC  
Items  
Specifications  
53 cm (20.8-inch) Color TFT Normally Black  
LCD display device  
Pixel pitch  
Horizontal 0.207 mm × Vertical 0.207 mm  
Horizontal 318.0 mm × Vertical 423.9 mm  
1536 × 2048 pixels  
Display area  
Pixel  
Display gradation  
Backlight  
16.77million (8 bit each)  
12 cold cathode fluorescent lamps (CCFL)  
Optical characteristics  
of the LCD  
Horizontal ......... ± 85 deg (contrast ratio 10:1)  
Vertical ............. ± 85 deg (contrast ratio 10:1)  
Contrast ratio.... 300:1(viewing angle vertical/lateral 0˚)  
120 cd/m2 ± 20 cd/m2  
160 cd/m2 over  
Factory setting brightness  
Maximum brightness  
Input sync signal  
Compliant with DVI 1.0  
Available resolution  
Input terminal  
640 x 480, 800 x 600, 1024 x 768, 1536 x 2048(Fv=30Hz), 2048x 1536(Fv=30Hz)  
24-pin DVI-D connector, 4-pin DC power input terminal, 8-pin serial connector  
for communication, 8-pin serial connector for sensor connection  
USB hub function  
Temperature  
Compliant with USB standard Rev.1.1 Bus-powered hub  
USB UPstream connector x 1, USB DOWN stream connector x 2  
On  
Off  
Temperature  
:
:
:
5~35 ℃  
-20~60 ℃  
10~85 %  
Humidity (non-condensation)  
Air pressure  
30~80 %  
701~1013 hPa  
266~1013 hPa  
Power  
AC adapter ....... Input AC 100~240 V 50/60 Hz, 2.0~1.0 A  
(Model:MW116) Output DC 12 V, 6.67 A Connector 3P AC inlet  
Unit ................... DC 12 V, 6.6 A  
(Model:DV3MC)  
Power consumption  
Normal operation:  
approx. 80 W (when the exclusive AC adapter used)  
Power management state:Less than 10 W (when the exclusive AC adapter used)  
External dimensions and  
Mass (including tilt stand)  
Unit only ........... 367 x 523 x 220 mm (W x H x D:when horizontal) approx. 11 kg  
When packed ... 470 x 685 x 345 mm (W x H x D) approx. 17 kg  
Calibration system (option) Color sensor(made by MINOLTA), DirectColorCal software  
Color sensor attachment  
International  
standards  
UL2601-1, cUL2601-1, CSA C22.2 N601.1, TÜV-GM(EN60601-1)  
BSMI(Class A), MIC, FCC Class A, VCCI Class A  
MDD/CE(EN60601-1, EN60601-1-2/2001, EN55011)  
●The specifications and appearance will be changed for improvement without notice.  
20  
- 20 -  
External Dimensions  
Portrait (shorter side at the top)  
 
Front】  
Left side view】  
Landscape (longer side at the top)  
 
 
��  
��  
Front】  
Left side view】  
- 21 -  
Technical Support  
Requesting Repair  
Read "Failure Diagnosis (Pg. 18)" carefully and check them yourself.  
In case of having abnormalities on your driver, stop operating, unplug the AC cable from the outlet, and  
consult dealer.Do not repair by yourself. It is very dangerous.  
Consult your dealer for repair.  
Use the product's packing and packing materials to send the product. Carefully place the unit in the  
packing, and keep the face from touching any packing materials.  
The panel surface touching the materials during transportation will cause damage on the panel surface;  
we will not cover the damage.  
Contact Technical Support  
Consult your dealer for technical support.  
Notes for User's Manual  
Copying any part or all of this manual without authorization is prohibited.  
The content of this manual will be subject to change without notice.  
・ Although this was made carefully, please contact us if any unclear points, mistakes, or parts left out.  
- 22 -  
EASTMAN KODAK COMPANY  
Rochester, NY 14650, U.S.A.  
PZZ11-885  
Printed in Japan (Recycled Paper)  
MDL2106A-1A  
031225  

IBM 9483 User Manual
Intel IM Q35 Series User Manual
JVC AV 21QX17B User Manual
KitchenAid KGCU62 User Manual
LG Electronics LG Life Good Computer Monitor E2360V User Manual
LG Electronics RH188H User Manual
Moffat G514C CB User Manual
Moffat Turbofan E25 User Manual
Panasonic DMR BS750 User Manual
Philips 14PT3005 User Manual