Jenn Air JGC8536BD User Manual

30" (76.2 cm) and 36" (91.4 cm) Sealed Gas Cooktop  
PRODUCT MODEL NUMBERS  
JGC8430CD JGC8536BD  
PRODUCT DIMENSIONS – 30" MODEL (JGC8430CD)  
E
F
Gas supply: The installation of this appliance  
must conform with local codes or, in the  
absence of local codes, with the National Fuel  
Gas Code, ANSI Z223.1-Latest Edition, or, in  
Canada, CAN/CGA-B149 Installation Code,  
Latest Edition.  
J
MANIFOLD  
ENTRANCE  
All supply piping, except as noted, should use  
common National Pipe Thread (N.P.T.). For all  
pipe connections use an approved pipe joint  
compound resistant to the action of LP gas.  
This appliance is designed for use with the  
appliance gas pressure regulator supplied with  
this appliance. It must be installed in the gas  
line ahead of the gas manifold entrance. It is  
preset for use with natural gas and must be  
converted, as described in the Installation  
Instructions for use with LP gas.  
This appliance is designed to operate at a  
pressure of 5" of water column on natural gas  
or, if converted for use with LP gas (propane  
or butane), 10" water column. Make sure this  
appliance is supplied with and adjusted for the  
type of gas for which it is designed.  
This appliance was adjusted at the factory for  
use with natural gas. If, at any time, this  
appliance is to be used with a different type of  
gas, all of the conversion adjustments  
B
A
C
G
D
I
H
Dimensions  
28-3/4" (73.0 cm)  
20-5/8" (52.4 cm)  
2" min.  
5-1/16" (12.9 cm)  
30" (76.2 cm)  
21-3/4" (55.2 cm)  
3-11/16" (9.4 cm)  
12-7/16" (31.6 cm)  
"A"  
"B"  
"C"  
"D"  
"E"  
"F"  
"G"  
"H"  
"I"  
(5.1 cm)  
IMPORTANT: Cutout  
dimensions are critical.  
Dimensions must be measured  
and cut accurately to within  
1/16" (0.2 cm) to ensure  
proper fit.  
1-3/4"  
1-3/4"  
(4.4 cm)  
(4.4 cm)  
"J"  
described in the Installation Instructions must  
be made by a qualified service technician  
before attempting to operate the cooktop on  
that gas. Natural gas should be supplied to the  
appliance pressure regulator at a line pressure  
between 6" and 14" of water column or, if  
converted for LP gas, between 11" and 14".  
PRODUCT DIMENSIONS – 36" MODEL (JGC8536BD)  
E
F
Make the gas connection to the inlet of the  
appliance pressure regulator with 1/2" NPT  
male pipe threads.  
J
MANIFOLD  
ENTRANCE  
Install a manual shut-off valve in an accessible  
location in the gas line ahead of the appliance  
pressure regulator and external to this  
appliance for the purpose of turning on or  
shutting off gas to the appliance.  
Make additional pipe connections as necessary  
ahead of the shut-off valve to the gas supply  
source. Assure all pipe joint connections are  
gas tight.  
B
D
A
I
H
C
Electrical: See page 2.  
Dimensions  
"A"  
"B"  
"C"  
"D"  
"E"  
"F"  
"G"  
"H"  
"I"  
34-7/8" (88.6 cm)  
20-13/16" (52.9 cm)  
2" min.  
4-9/16" (11.6 cm)  
36" (91.4 cm)  
(5.1 cm)  
21-9/16" (54.8 cm)  
3-13/16" (9.6 cm)  
15-1/2" (39.4 cm)  
IMPORTANT: Cutout  
dimensions are critical.  
Dimensions must be measured  
and cut accurately to within  
1/16" (0.2 cm) to ensure  
proper fit.  
1-3/4"  
1-3/4"  
(4.4 cm)  
(4.4 cm)  
"J"  
Page 1 of 2  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. 8101P643-60  
09-26-08  

Indesit KD6G25X User Manual
JVC AV 32X5SU User Manual
KitchenAid KGCC766 User Manual
Lindy 21527IT User Manual
NEC 73V User Manual
Nvidia N61P User Manual
Palsonic 7118 User Manual
Philips 55PL9773 User Manual
Philips 170B4MG User Manual
Philips DECT SE175 User Manual