JVC XV F80BK User Manual

'9'ꢀ9,'(2ꢀ3/$<(5  
Introduction  
2
;9ꢁ)ꢂꢃ%.ꢄ;9ꢁ)ꢂꢅ*'  
Preliminary knowledge  
Getting started  
6
16  
24  
30  
46  
49  
56  
Basic operations  
Advanced operations  
MP3 disc playback  
Initial settings  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
SELECT  
3
PLAY  
STANDBY  
3
STANDBY/ON  
STOP PAUSE  
+
CH  
7
8
5
VOL  
-
VOL  
+
7
-
DISC  
4
¢
SKIP  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
ENTER  
-
CH  
PROGRESSIVE  
DVD  
/
VIDEO CD / CD  
REMOTE CONTROL  
Additional information  
,16758&7,216  
)RUꢀ&XVWRPHUꢀ8VHꢆ  
(QWHUꢀEHORZꢀWKHꢀ0RGHOꢀ1RꢁꢀDQGꢀ6HULDOꢀ1Rꢁꢀ  
ZKLꢂKꢀDUHꢀORꢂDWHGꢀRQꢀWKHꢀUHDUꢃꢀERWWRPꢀRUꢀ  
VLGHꢀRIꢀWKHꢀꢂDELQHWꢁꢀ5HWDLQꢀWKLVꢀLQIRUPDWLRQꢀ  
IRUꢀIXWXUHꢀUHIHUHQꢂHꢁ  
0RGHOꢀ1Rꢁꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
6HULDOꢀ1Rꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ  
/(7ꢄꢅꢆꢇꢈꢄꢄꢅ%  
>-@  
English  
Table of Contents  
To locate a desired selection using 4or ¢...................31  
To locate a desired scene by specifying the chapter  
Introduction  
Page 2  
number [CHAP.SEARCH] ...................................................32  
To locate a desired position in the current title or track  
[TIME SEARCH]...................................................................32  
To locate a desired scene from the display [DIGEST] ........33  
Special picture playback................................................. 34  
To advance a still picture frame-by-frame...........................34  
To display continuous still pictures [STROBE]....................34  
To playback in slow-motion [SLOW]....................................35  
To zoom in/out [ZOOM].........................................................35  
Changing the playback order ......................................... 36  
To playback in the desired order [PROGRAM]....................36  
To playback in random order [RANDOM]............................37  
Repeat playback............................................................... 37  
To repeat the current selection or all tracks [REPEAT].......37  
To repeat a desired part [A-B REPEAT] ...............................39  
Selecting a scene angle of DVD VIDEO ......................... 40  
To select a scene angle from the normal screen  
Features...............................................................................2  
Supplied accessories..........................................................3  
About this instruction manual ..........................................4  
Notes on handling..............................................................5  
Preliminary knowledge  
Page 6  
Names of parts and controls.............................................6  
Front panel................................................................................6  
Display window........................................................................7  
Remote control unit .................................................................8  
Rear panel...............................................................................10  
Operational Principles......................................................11  
On-screen displays.................................................................11  
To prevent the monitor from burning out  
[SCREEN SAVER]................................................................13  
On-screen guide icons...........................................................14  
How to use numeric buttons.................................................14  
About discs .......................................................................15  
Playable disc types.................................................................15  
Disc structure..........................................................................15  
[ANGLE]...............................................................................40  
To select a scene angle from the angle list display  
[ANGLE]...............................................................................41  
Changing the language and sound................................ 41  
To select the subtitle language [SUBTITLE] ........................41  
To change the audio language or sound [AUDIO]..............42  
Miscellaneous functions ................................................. 43  
To adjust the picture character [VFP]...................................43  
To simulate surround sound [3D PHONIC]..........................44  
To check the disc time [TIME SELECT] ................................45  
Changing the brightness of the display window.................45  
Getting started  
Page 16  
Connections......................................................................16  
Before making any connections ...........................................16  
To connect to a conventional TV ..........................................16  
To connect to a TV with the component video  
input jacks............................................................................17  
To connect to an audio amplifier or receiver.......................18  
To connect to audio equipment with a digital input...........19  
To connect the power cord ...................................................20  
Using the remote control unit.........................................20  
To install batteries in the remote control unit .....................20  
Remote sensor .......................................................................21  
To use the remote control unit for TV operation.................22  
MP3 disc playback  
Page 46  
About MP3 disc................................................................ 46  
Operations........................................................................ 46  
Basic operations.....................................................................46  
Specifying the desired Group and Track .............................47  
Repeat playback.....................................................................48  
Basic operations  
Page 24  
Initial settings  
Page 49  
Turning on/off the unit ....................................................24  
Inserting and removing discs..........................................24  
Basic playback ..................................................................26  
To start playback....................................................................26  
To stop playback completely ................................................27  
To stop playback temporarily ...............................................27  
To advance or reverse playback rapidly while  
Selecting preferences...................................................... 49  
How to set preferences..........................................................49  
Language and display preference ........................................49  
Audio and system preference...............................................51  
Limiting playback by children ........................................ 53  
To set Parental Lock for the first time  
[PARENTAL LOCK]..............................................................53  
To change the settings [PARENTAL LOCK] .........................54  
To temporarily release the Parental Lock  
monitoring...........................................................................27  
To locate the beginning of the scene or song .....................28  
Changing discs during playback [PLAY EXCHANGE].........28  
Resuming playback..........................................................29  
To memorize the interrupted position .................................29  
To resume playback...............................................................29  
[PARENTAL LOCK]..............................................................55  
Additional information  
Page 56  
AV COMPU LINK remote control system...................... 56  
Connection and setup............................................................56  
Operation................................................................................57  
Care and handling of discs.............................................. 58  
Troubleshooting .............................................................. 59  
Specifications................................................................... 60  
Table of languages and their abbreviations.. Appendix A  
Country code list for Parental Lock.................Appendix B  
Advanced operations  
Page 30  
Playing from a specific position on a disc......................30  
To locate a desired scene from the DVD menu...................30  
To locate a desired scene from the menu of the  
Video CD with PBC..............................................................30  
To locate a desired selection using the numeric  
buttons.................................................................................31  
1
       
                                                        
                                                        
       
                                                        
       
                                                        
       
                                                        
       
       
       
       
       
       
Introduction  
Features  
This unit is a compatible player for DVD VIDEO, Audio CD and Video CD discs.  
Picture functions  
Other functions  
7Progressive Scan system  
7Multi-disc tray and continuous playback  
You can set up to 7 discs on the disc tray carousel and  
playback them continuously.  
Supports the Progressive scan system, as well as the  
conventional (current) Interlace scan system.  
* To enjoy the progressive video picture, you must  
connect the unit to a television or monitor that  
supports the progressive video input.  
7MP3 disc playback  
This unit can playback CD discs recorded by the MP3  
format (we refer to those discs as “MP3 discs” in this  
manual).  
7Strobe function  
The unit can display nine continuous still pictures on  
the TV screen.  
7CD-R/CD-RW playback  
You can playback a CD-RW disc recorded with the  
Audio CD format, and a CD-R disc recorded with the  
Audio CD, Video CD or MP3 format.  
7Digest function  
You can select the desired selection to be played from  
the opening scenes displayed on the TV screen.  
7Multi-language subtitles and sound*  
You can select a subtitle or sound language from  
those recorded on the DVD VIDEO disc.  
7Angle function*  
You can select a desired angle from multiple camera  
angles recorded on the DVD VIDEO disc.  
7Operation from the on-screen display  
User-friendly on-screen displays allow you to operate  
the unit easily.  
7Zoom function  
You can view scenes close-up.  
7VFP (Video Fine Processor) function  
You can adjust the picture character according to the  
type of programming, picture tone or personal  
preferences.  
Functions with (*) mark only work on a DVD VIDEO disc  
that is compatible with each function.  
7Parental Lock*  
You can restrict the playback of DVD VIDEO discs with  
scenes which you do not want children to see, such as  
adult or violent films.  
Audio functions  
7High quality digital sound  
You can enjoy high quality sound with Linear-PCM.  
7Surround function*  
The unit accommodates the Dolby Digital and DTS  
surround systems.  
(These surround signals are output only from the  
DIGITAL OUT jacks.)  
73D PHONIC function  
You can enjoy Virtual surround sound with your  
2-channel (stereo) system.  
2
Introduction  
English  
Supplied accessories  
• Audio/video cable (x 1)  
• R6P(SUM-3)/AA(15F) batteries (x 2)  
• Instruction manual (x 1)  
• Component video cable (x 1)  
• AV compulink cable (x 1)  
• AC power cord (x 1)  
• Remote Control Unit (x 1)  
R
E
PE  
DISC  
SELECT  
A
T
1 T  
V
3D  
PH  
O
S
T
4 TV4  
V
A
T
N
IC  
T
V
N
D
TV  
/V  
B
Y
TV  
C
/O  
N
V
D
7
-/--  
7
T
2
A
N
ID  
10TV  
D
2
E
O
L
D
V
C
E
D
5 TV  
5
A
T
N
G
L
R
E
TV  
TU  
R
E
D
8
8
IG  
ES  
SU  
BTITLE  
N
T
TV  
V3  
PREVIOUS  
3
0
0
6 T  
V6  
CLEA4  
T
V
A
U
D
9
M
IO  
U
T
+
7
10  
I
N
G
S
1
S
Z
V
O
O
F
E
LE  
P
R
M
O
G
CT  
3
R
E
S
+
T
C
S
S
IT  
A
L
N
E
XT  
N
IV  
E
E
¢
VO  
L
ST  
R
O
8
S
C
H
B
LO  
E
+
¡
5
W
+
CHOICE  
E
N
MENU  
T
E
R
C
H
5
VO  
+
L
O
N
S
C
E
N
R
E
M
O
T
E
C
O
N
T
R
O
L
3
Introduction  
About this instruction manual  
• This instruction manual is written in the following manner.  
• This unit can playback CD-R discs recorded by the MP3 format (we refer to those discs as MP3 discs in this manual).  
• Regarding operations for MP3 discs, see “MP3 disc playback” on and after page 46. The other sections of this manual  
basically do not refer to MP3 disc playback.  
To playback in random order  
[RANDOM]  
You can play tracks on an Audio CD or Video CD discs in  
random order by using the Random function.  
These symbols  
indicate the types  
of discs which the  
operation can be  
used for.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
9
MUTING  
TV-/--  
10  
TV0  
0
+
10  
VFP  
ANGLE SUBTITLE AUDIO  
PROGRESSIVE  
SCAN  
DIGEST  
ZOOM  
+
SELECT  
3
+
CH  
3
1
5
ENTER  
VOL  
-
VOL  
+
2
The number  
indicates the  
-
CH  
REMOTE CONTROL  
following procedural  
step(s) in which the  
button(s) is(are)  
used.  
While stopped  
You may also use the  
corresponding  
buttons on the front  
panel of the unit if  
available.  
1Press ON SCREEN.  
The on-screen display appears on the TV screen.  
The number  
indicates the  
procedural step.  
2Use CURSOR 5/to move to [RANDOM].  
(for Audio CD)  
(for Video CD)  
MIN  
3
SEC  
54  
MIN  
3
SEC  
54  
EACH  
REMAIN  
EACH  
REMAIN  
TRACK  
1
TIME  
:
TRACK  
1
TIME  
:
TIME SELECT  
TIME SELECT  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
PRESS ENTER =EXEC4TE  
PRESS ENTER =EXEC4TE  
1
9
2
3
4
5
6
7
8
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
17 18 19 20 21 22 23 24  
The names of buttons  
on the remote control  
unit (or on the front  
panel of the unit) are  
all given in uppercase  
letters.  
3Press ENTER.  
The color of [RANDOM] changes.  
The unit starts random playback.  
The RANDOMindicator appears in the display  
window on the front panel. After playing all tracks  
of the disc loaded, random playback ends.  
Other convenient  
procedures, etc.  
The same track will not be played back more than once  
during random play.  
During Audio CD playback, pressing ENTER when points  
[RANDOM] quits random mode and continues playback in  
the normal order.  
To quit random playback in the middle  
Press 7. The unit stops playback and quits the  
random playback mode.  
NOTE  
• Random playback is carried out only within the disc  
currently loaded.  
4
Introduction  
English  
Notes on handling  
Important cautions  
Installation of the unit  
Safety precautions  
Avoid moisture, water and dust  
Select a place which is level, dry and neither too hot  
nor too cold (between 5oC and 35oC, 41oF and 95oF).  
Leave sufficient distance between the unit and the TV.  
Do not use the player in a place subject to vibrations.  
Do not place the unit in moist or dusty places.  
Avoid high temperatures  
Do not expose the unit to direct sunlight or place it near  
a heating device.  
Power cord  
When you are away  
When away on travel or otherwise for an extended  
period of time, remove the plug from the wall outlet.  
Do not handle the power cord with wet hands!  
A small amount of power (2.7 W) is always consumed  
while the power cord is connected to the wall outlet.  
When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
Do not insert foreign objects into the unit  
Do not insert wires, hairpins, coins, etc. into the unit.  
To prevent malfunction of the unit  
Do not block the vents  
Blocking the vents may damage the unit.  
There are no user-serviceable parts inside. If anything  
goes wrong, unplug the power cord and consult your  
dealer.  
Care of the cabinet  
Do not insert any metallic object into the unit.  
Do not use any non-standard shape disc available on  
the market, because it may damage the unit.  
Do not use a disc with tape, seals, or paste on it,  
because damage to the unit may result.  
When cleaning the unit, use a soft cloth and follow the  
relevant instructions on the use of chemically-coated  
cloths. Do not use benzene, thinner or other organic  
solvents and disinfectants. These may cause  
deformation or discoloring.  
Note about copyright laws  
If water gets inside the unit  
Please check the copyright laws in your country before  
recording from DVD VIDEO, Audio CD, Video CD and  
MP3 discs. Recording of copyrighted material may  
infringe copyright laws.  
Turn off the power switch and remove the plug from the  
wall outlet, then call the store where you made your  
purchase. Using the unit in this state may cause a fire or  
electrical shock.  
Note about the copyguard system  
The DVD VIDEO disc is protected by the copyguard  
system. When you connect the unit to your VCR  
directly, the copyguard system activates and the  
picture may not be played back correctly.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents  
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this  
copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and  
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. Dolbyand the double-D symbol are trademarks of Dolby  
Laboratories.  
Confidential unpublished works.  
© 1992-1998 Dolby Laboratories. All rights reserved.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents  
issued and pending. DTS, DTS Digital Surround, are trademarks of Digital Theater Systems, Inc.  
© 1996 Digital Theater Systems, Inc. All Rights Reserved.  
5
Preliminary knowledge  
Names of parts and controls  
Refer to the corresponding pages indicated in () for details.  
Front panel  
7 8(PAUSE) button  
1 STANDBY indicator  
4
EXCHANGE/ DISC SKIP  
button/indicator  
6 0(OPEN/CLOSE) button  
2 STANDBY/ON  
button  
3 DISC (1 through 7) buttons/  
5 3(PLAY) button  
indicator  
s
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
PLAY  
STANDBY  
3
STANDBY/ON  
STOP PAUSE  
7
8
7
-
DISC  
4
SKIP  
¢
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
PROGRESSIVE  
DVD  
/
VIDEO CD CD  
/
= 7(STOP) button  
8 Remote sensor  
0 Display window  
9 PROGRESSIVE indicator  
~ 4/¢(SKIP)  
- Disc tray carousel  
buttons  
1 STANDBY indicator (24)  
4
EXCHANGE/ DISC SKIP button/indicator (25, 28)  
This button has two functions. When the indicator is  
illuminated, pressing the button activates the play  
exchange function. When the indicator is unlit,  
pressing the button rotates the carousel.  
Lights in red when the power cord is connected and  
the unit is on standby. When the unit is turned on,  
the STANDBY indicator goes off.  
2 STANDBY/ON  
button (24)  
When the tray carousel is closed during playback,  
pressing the button activates the play exchange  
function and opens the carousel.  
Turns the unit on or off (standby).  
3 DISC (1 through 7) buttons/indicators (26)  
Select a disc set on the carousel to be played back by  
When the tray carousel is open during playback, each  
press of this button rotates the carousel to access other  
trays except the one for the disc being played.  
pressing the appropriate button. The indicator on each  
button shows the current status of the corresponding  
disc/disc tray.  
When the tray carousel is open while stopped, each  
press of this button rotates the carousel clockwise  
by an amount of accessing the next two trays.  
See About DISC indicators (1 through 7)on page 26  
for details.  
5 3(PLAY) button (26)  
Starts playback. Also, used as a SELECT button for  
PBC of Video CDs.  
6
Preliminary knowledge  
English  
6 0(OPEN/CLOSE) button (24, 28)  
0 Display window (7)  
Used to open and close the carousel. You can also use  
Indicates the current status of the unit.  
this button in the play exchange mode.  
- Disc tray carousel  
Used to set up to 7 discs.  
7 8(PAUSE) button (27, 34, 46)  
Pauses playback. Also, used to display nine continuous  
still pictures (STROBE function).  
= 7(STOP) button (27, 46)  
Stops playback.  
8 Remote sensor (21)  
~ 4/¢(SKIP) buttons (27, 46)  
Receives signals from the remote control unit.  
Used to skip a chapter, title or track. Also, used for  
the page selection of a menu screen (for Video CD).  
Holding down 4or ¢during playback reverses or  
advances playback rapidly (except MP3 disc).  
9 PROGRESSIVE indicator (17)  
Lights up when the Progressive scan mode is active.  
It lights in green during playback of a film-source DVD  
VIDEO disc when PROGRESSIVE MODEin  
PREFERENCE 1is set to SMART, FILMor AUTO.”  
In other conditions when the Progressive scan mode is  
active, it lights in red.  
Display window  
1 Audio format indicators  
4 Title/track/  
chapter indicators  
5 Repeat mode indicators  
2 Disc indicator  
3 3(play)/8(pause)  
indicators  
LPCM  
MPEG  
DOLBY  
DIGITAL  
DTS  
-
TITLE TRACK CHAP  
1
A B  
VCDVD  
38  
PROGRAM  
RANDOM  
7 Multi-information window  
6 PROGRAM/RANDOM indicators  
1 Audio format indicators  
4 Title/track/chapter indicators  
One or more appropriate indicators illuminate according  
to the disc inserted.  
Indicates the format of audio currently being played back.  
2 Disc indicator  
Indicates the type of the disc set in the current tray. When  
DVD VIDEO disc is set, DVDlights up. When a Video CD  
disc is set, VCDlights up. When an Audio CD is set,  
CDlights up.  
5 Repeat mode indicators  
The appropriate indicator illuminates according to the  
current repeat mode.  
6 PROGRAM/RANDOM indicators  
The appropriate indicator illuminates while the unit is  
in the Program or Random playback mode.  
3 3(play)/8(pause) indicators  
3or 8illuminates during playback or while paused,  
respectively.  
7 Multi-information window  
Neither of them illuminates while stopped.  
Displays the current title/track/chapter number(s), time  
and status information.  
7
Preliminary knowledge  
Remote control unit  
! Infrared signal-emitting  
window  
@ TV STANDBY/ON  
button  
TV  
DVD  
# TV - DVD switch  
1 DISC SELECT button  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
$ DVD STANDBY/ON  
button  
3D  
TV/VIDEO  
% RETURN button  
2 REPEAT button  
PHONIC CANCEL RETURN  
REPEAT  
TV1  
3 3D PHONIC button  
^ TV/VIDEO - CANCEL button  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
4 Numeric buttons  
9
TV-/--  
10  
MUTING  
&
VFP - PROGRESSIVE SCAN button  
+
10  
5 ANGLE button  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
6 SUBTITLE button  
* AUDIO button  
-
DIGEST  
ZOOM  
+
7 DIGEST button  
( ZOOM +/buttons  
8 4/PREVIOUS button  
) ¢/NEXT button  
SELECT  
_ 8/STROBE button  
3
9 7/CLEAR button  
+ 3/SELECT button  
0 1/SLOWbutton  
¡ ¡/SLOW+ button  
+
CH  
- TITLE button  
MENU button  
5
VOL  
-
VOL  
+
ENTER  
£ ENTER button  
= CURSOR(5Up, Down)  
- CH(+/) buttons  
¢ CURSOR (2Left, 3Right)  
-
CH  
- VOL (+/) buttons  
~ CHOICE button  
ON SCREEN button  
REMOTE CONTROL  
1 DISC SELECT button (14, 26)  
4 Numeric buttons (14, 22)  
Pressing this button followed by the appropriate numeric  
button (1 through 7) within 5 seconds selects a disc to be  
played back.  
When the TV - DVD switch is set to DVD, these buttons  
are used to select a disc and specify a title, chapter, track  
number, as well as used to select a disc and enter a time  
for the Time search function.  
2 REPEAT button (37, 48)  
They are also used to select a disc number to be played  
back in conjunction with the DISC SELECT button.  
When the TV - DVD switch is set to TV, these buttons  
are used to select a TV channel as well as mute the TV  
audio.  
Selects the repeat mode.  
3 3D PHONIC button (44)  
Produces a simulated surround effect.  
8
Preliminary knowledge  
English  
5 ANGLE button (40, 41, 45)  
% RETURN button (31)  
Changes camera angles during playback of a DVD  
VIDEO disc containing multiple camera angles.  
Also used to change the brightness of the display  
window.  
Returns to the previous menu (for Video CD).  
^ TV/VIDEO - CANCEL button (22, 36)  
Switches the TV input mode when the TV - DVD switch  
is set to TV.  
Cancels the last selection of the program when the  
TV - DVD switch is set to DVD.  
6 SUBTITLE button (41)  
Used to display the subtitle selection display on the  
TV screen, as well as used to turn the subtitle on or off  
(for DVD VIDEO).  
& VFP - PROGRESSIVE SCAN button (17, 43)  
Pressing this button brings up the VFP (Video Fine  
Processor) window in which you can select or adjust the  
picture character.  
7 DIGEST button (33)  
Displays beginning scenes of each title, chapter or  
track on the TV screen (for DVD VIDEO/Video CD).  
Holding down this button for a few seconds switches the  
scan mode between the progressive scan and interlace  
scan modes. See How to make the Progressive scan  
mode activeon page 17 for details.  
8 4/PREVIOUS button (27, 28, 31, 46)  
Skips back a chapter, title or track. Also used for the  
page selection of a menu screen (for DVD VIDEO/Video  
CD).  
* AUDIO button (42)  
Holding down this button during playback reverses  
playback rapidly (except MP3 disc).  
Selects the audio (for DVD VIDEO/Video CD).  
( ZOOM +/buttons (35)  
Zooms in or out the picture (for DVD VIDEO/Video CD).  
9 7/CLEAR button (27, 36, 46)  
Stops playback. Also used to clear all the programmed  
selections for the program play.  
) ¢/NEXT button (27, 28, 31, 46)  
Skips forward a chapter, title or track. Also used for the  
page selection of a menu screen (for DVD VIDEO/Video  
CD).  
0 1/SLOWbutton (27, 35)  
Pressing this button during playback reverses playback  
rapidly (except MP3 disc).  
Pressing this button while a DVD VIDEO disc is paused  
reverses playback slowly.  
Holding down this button during playback advances  
playback rapidly (except MP3 disc).  
_ 8/STROBE button (27, 34, 46)  
Pauses playback. Also, used to display nine continuous  
- TITLE button (30)  
Displays the title menu of a DVD VIDEO disc on the TV  
still pictures (STROBE function).  
screen.  
Pressing this button while paused advances the still  
picture frame-by-frame.  
= CURSOR (5Up, Down) - CH (+/) buttons  
When the TV - DVD switch is set to DVD, these buttons  
are used to select an item from a menu or on-screen  
display, or to change the setting of an on-screen  
display item.  
+ 3/SELECT button (26, 30)  
Starts playback. Also used as a SELECT button for PBC  
of Video CDs.  
¡ ¡/SLOW+ button (27, 35)  
In this case, we call them CURSOR 5/buttons in  
this manual.  
Pressing this button during playback advances  
playback rapidly (except MP3 disc).  
When the TV - DVD switch is set to TV, they are used  
to select a TV channel.  
Pressing this button while a DVD VIDEO or Video CD  
disc is paused advances playback slowly.  
~ CHOICE button (49)  
MENU button (30)  
Brings up the preference on-screen display on the TV  
Displays a DVD menu on the TV screen.  
screen.  
£ ENTER button  
Executes the selected item in a menu or on-screen  
display.  
! Infrared signal-emitting window (21)  
Point this window toward the remote sensor on the  
front panel when pressing buttons.  
¢ CURSOR (2Left, 3Right) - VOL (+/) buttons  
When the TV - DVD switch is set to DVD, these buttons  
are used to select an item from a menu or on-screen  
display, or to change the setting of an on-screen  
display item.  
@ TV STANDBY/ON  
button (22)  
Turns the TV on or off (standby).  
# TV - DVD switch (14, 23, 30)  
When setting this switch to TV, the numeric, cursor  
and TV/VIDEO - CANCEL buttons are used to control  
your TV.  
In this case, we call them CURSOR 2/3buttons  
in this manual.  
When setting it to DVD, these buttons are used to  
control the unit.  
When the TV - DVD switch is set to TV, they are used to  
change the TV audio volume.  
$ DVD STANDBY/ON  
button (24)  
ON SCREEN button  
Turns the unit on or off (standby).  
Brings up an appropriate on-screen display for  
controlling advanced functions for the current disc on  
the TV screen.  
9
Preliminary knowledge  
Rear panel  
1 DIGITAL OUT jacks (COAXIAL/OPTICAL)  
2 VIDEO OUT - VIDEO jack  
3 VIDEO OUT - COMPONENT jacks (Y/PB/PR  
4 Region code label  
)
1
DIGITAL OUT  
PCM / STREAM  
AUDIO OUT  
VIDEO OUT  
AC IN  
AV COMPU LINK  
VIDEO  
COAXIAL OPTICAL RIGHT LEFT  
COMPONENT  
Y
P
B
PR  
S-VIDEO  
7 AV COMPU LINK jacks  
6 VIDEO OUT - S-VIDEO jack  
8
AC IN connector  
5 AUDIO OUT jacks (RIGHT/LEFT)  
1 DIGITAL OUT jacks (COAXIAL/OPTICAL) (19)  
Outputs digital audio signals. You must select the  
signal type correctly according to the external device  
connected to via the Preference display. Both the  
COAXIAL and OPTICAL connectors are provided.  
4 Region code label (15)  
Indicates the region code of the unit.  
5 AUDIO OUT jacks (RIGHT/LEFT) (16, 17)  
Outputs stereo analog audio signals.  
6 VIDEO OUT - S-VIDEO jack (16)  
Outputs an S-video signal.  
2 VIDEO OUT - VIDEO jack (16)  
Outputs a composite video signal.  
7 AV COMPU LINK jacks (56)  
Connects with other JVC equipment supporting the AV  
Compulink function to facilitate integrated operations.  
3 VIDEO OUT - COMPONENT jacks (Y/PB/PR) (17)  
Output component video signals.  
These jacks can output the Progressive scan signals as  
well as the conventional Interlace scan signals.  
See How to make the Progressive scan mode activeon  
page 17 for details.  
8
AC IN connector (20)  
Connects to the wall outlet using the supplied AC  
power cord.  
10  
Preliminary knowledge  
English  
Operational Principles  
On-screen displays  
You can set preferences and perform advanced playback  
functions via various on-screen displays, including the  
Opening, Preference, Parental Lock and Control displays.  
Basic operations of on-screen displays  
TV  
DVD  
You can move  
using the CURSOR 5//2/3buttons  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
to select items you want to work with.  
1 / 3  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
With an item like  
you can change the setting  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
by using the CURSOR 2/3buttons when  
the item.  
is on  
Numeric  
buttons  
9
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
REPEAT  
- type item works when you place  
item and press ENTER.  
In the message box, the operation to be performed is  
on the  
-
DIGEST  
ZOOM  
SELECT  
3
displayed according to the item pointed by  
Numbers are entered using the numeric buttons.  
.
+
CH  
5
VOL  
-
VOL  
+
Some functions become effective by pressing ENTER  
after specifying necessary entries.  
ENTER  
CURSOR  
5//2/3  
ENTER  
-
CH  
REMOTE CONTROL  
Opening display  
An opening display appears automatically (without  
pressing any button) in some conditions.  
One of the displays shown on the right appears when a  
disc is set and stopped. For a disc that does not contain  
any picture (such as an Audio CD), the opening display  
does not disappear after starting playback.  
(for Audio CD)  
(for DVD VIDEO)  
(for Video CD)  
11  
Preliminary knowledge  
PREFERENCE (1, 2) displays (see page 49)  
You can set preferences via these displays.  
(PREFERENCE 2)  
(PREFERENCE 1)  
PREFERENCE1  
PREFERENCE2  
PREFERENCE1  
PREFERENCE2  
STREAM/PCM  
Lo / Ro  
ON  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ON SCREEN LANGUAGE  
ON SCREEN GUIDE  
MONITOR TYPE  
To bring up the PREFERENCE 1/PREFERENCE 2  
display  
OFF  
ENGLISH  
ON  
MODE 1  
DVD1  
4:3 LB  
AUTO  
1 When a DVD VIDEO disc is set and stopped or no  
PROGRESSIVE MODE  
PRESS  
KEY  
PRESS  
KEY  
disc is inserted, press CHOICE.  
2 To select the display, move  
to the desired tab  
using the CURSOR 2/3buttons.  
PARENTAL LOCK display (see page 53)  
PARENTAL LOCK  
You can set the Parental Lock from this display.  
US  
Country Code  
Set Level  
NONE  
– – – –  
To bring up the PARENTAL LOCK display  
PASSWORD  
EXIT  
When no disc is inserted or a DVD VIDEO disc is  
stopped, press ENTER while holding down 7.  
NEW PASSWORD? • • • PRESS 0~9 KEY  
DVD VIDEO CONTROL display  
You can select and set various functions for DVD VIDEO  
playback from this display.  
This display is available only during DVD VIDEO  
playback.  
Current relative  
position of the  
title  
1 / 3  
2 / 3  
1 / 3  
ANGLE  
AUDIO  
Current Current  
title  
chapter  
SUBTITLE  
(St: start,End: end)  
TITLE REPEAT  
number number  
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
CHAPTER  
3
1 : 34 : 58  
3
St.  
0
End  
TITLE  
TIME  
3
CHAPTER  
3
1 : 34 : 58  
10Mb  
TIME  
10Mb  
PRESS ENTER  
EXECUTE  
Transmission rate Elapsed time from  
the beginning  
To bring up the DVD VIDEO CONTROL display  
of the current title  
During DVD VIDEO playback, press ON SCREEN.  
CD CONTROL display  
TIME M3IN : 54  
SEC  
EACH  
REMAIN  
TRACK  
1
TIME SELECT  
You can select and set various functions for Audio CD  
playback from this display.  
REPEAT ALL  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
PRESS ENTER =EXECUTE  
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
To bring up the CD CONTROL display  
17 18 19 20 21 22 23 24  
Whenever an Audio CD is inserted, press ON SCREEN.  
12  
Preliminary knowledge  
VCD CONTROL display  
There are two types of VCD CONTROL display. The  
display shown on the right is available only during Video  
CD playback.  
When a Video CD disc is stopped, a display similar to the  
CD CONTROL display appears.  
English  
Current relative  
ST  
AUDIO  
position of the  
track  
Current track  
number  
(St: start, End: end)  
REPEAT ALL  
REPEAT  
St.  
End  
TRACK  
A-B REPEAT  
TIME SEARCH  
PBC CALL  
3
St.  
0
End  
TRACK  
3
TIME  
4 : 58  
10Mb  
TIME  
0
10Mb  
4 : 58  
PRESS ENTER  
EXECUTE  
Transmission rate  
Elapsed time from  
the beginning of  
the current track  
To bring up the VCD CONTROL display  
Press ON SCREEN when a Video CD is inserted. The  
appropriate display appears according to the unit's  
status.  
MP3 CONTROL display (See page 46)  
M P 3 C O N T R O L  
G R O U P :  
/
The display shown on the right appears when an MP3  
disc is set. You can select the desired Group or track to  
be played back.  
To prevent the monitor from burning out [SCREEN SAVER]  
A television monitor screen may be burned out if a static  
picture is displayed for a long time. To prevent this, the  
unit automatically activates the screen saver function if a  
static picture, such as an on-screen display or menu, is  
displayed for over 5 minutes.  
DVD/Video CD/CD PLAYER  
Pressing any button on the unit or the remote control  
unit will release the screen saver function and return to  
the previous display.  
You can select one of several screen saver modes  
available (see page 52).  
The screen saver function is not activated during  
Audio CD/MP3 disc playback or after stopping Audio  
CD/MP3 disc playback.  
13  
Preliminary knowledge  
On-screen guide icons  
During DVD VIDEO playback, you may see icons displayed over the picture. These have the  
following meanings.  
:
:
Displayed at the beginning of a scene recorded from multiple angles.  
(See page 40.)  
Displayed at the beginning of a scene recorded with multiple audio languages.  
(See page 42.)  
:
Displayed at the beginning of a scene recorded with multiple subtitle languages.  
(See page 41.)  
You can set the unit not to display on-screen icons above via the preference settings  
described on page 50.  
About invalid operation icon  
When you press a button, if the unit does not accept its operation,  
television screen. Operations are occasionally unacceptable even if  
appears on your  
is not displayed.  
Note that some operations may not be accepted. For example, some discs may not allow  
rapid advance/reverse or slow-motion playback.  
How to use numeric buttons  
The function of the numeric buttons differs depending on the setting of the TV - DVD  
switch. When setting it to TV, the buttons are used to select a TV channel (see page 22).  
When setting it to DVD, the buttons are used to select a disc, select a track/title/chapter or  
enter a disc time or chapter number.  
TV  
DVD  
To select a disc  
Press the DISC SELECT button, followed by the appropriate numeric button (1 through 7)  
within 5 seconds.  
DISC SELECT  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
To select a track/title number  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
1
2
2
3
3
To select a number between 1 and 10  
TV4  
4
TV5  
TV6  
5
6
TV9  
TV7  
7
TV8  
8
Press the corresponding button for the number.  
9
TV-/--  
TV0  
MUTING  
10  
10  
0
+
10  
0
To select a number higher than 10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
Use the +10 button.  
Numeric buttons  
Examples:  
To select 13  
To select 34  
To select 40  
+10 3  
+10 +10 +10 4  
+10 +10 +10 10  
To enter a time or chapter number  
The method for entering a time for Time search or chapter number for Chapter search is  
different from above. See the corresponding sections in this manual for the details.  
* There is another method for selecting a Track or Group of an MP3 disc. See the  
appropriate section.  
TV  
DVD  
To select a TV channel  
Press the corresponding numeric buttons. See page 22 and 23 for details.  
14  
Preliminary knowledge  
English  
About discs  
Playable disc types  
Playable and non-playable disc types are as follows:  
Playable discs  
DVD VIDEO  
Video CD  
Audio CD  
The DVD VIDEO Logo is a trademark.  
CD-R and CD-RW discs recorded with the Audio CD format and CD-R discs recorded with the Audio CD, Video CD and  
MP3 format can be played back, though some discs may not be played back because of the disc characteristics or  
recording condition.  
DVD VIDEO players and DVD VIDEO discs have their own Region Code numbers. This unit only can play back DVD  
VIDEO discs whose Region Code numbers include 1.  
Examples of playable DVD VIDEO discs:  
1 2  
3 4  
1 2 3  
4 5 6  
ALL  
1 5  
1
This unit accommodates both the NTSC and PAL system and can playback discs recorded with either system.  
Note that a PAL video signal on a disc is converted to an NTSC signal and output.  
When playing back a PALdisc, the Progressive scan mode is never active even if you set the Progressive scan mode  
to active.  
Non-playable discs  
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G, CD-TEXT  
Playing back discs listed as Non-playable discsabove may generate noise and damage speakers.  
This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.  
Disc structure  
A DVD VIDEO disc is comprised of titles, while an Audio CD or Video CD is comprised of tracks. Each title may be  
divided into some chapters. For example, if a DVD VIDEO disc contains some movies, each movie may have its own title  
number, and each movie may be divided into some chapters. In a DVD VIDEO KARAOKE disc, each song usually has its  
own title number and does not have chapters. In general, each title has independent content, while each chapter in the  
same title has continuity.  
(Example: DVD VIDEO disc)  
Title 1  
Title 2  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1  
Chapter 2  
(Example: Audio CD/Video CD)  
Track 1 Track 2  
Track 3  
Track 4  
15  
Getting started  
Connections  
*In the following description, TVmay be substituted with monitoror projector.”  
*Before using the unit, you have to connect the unit to a TV and/or amplifier.  
Before making any connections  
Do not connect the AC power cord until all other connections have been made.  
Since different components often have different terminal names, carefully read the instructions supplied with the  
component you are going to connect.  
To connect to a conventional TV  
You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT  
jacks to your separate audio equipment. (See the following pages.)  
The unit  
If theTV has an AV COMPU LINK terminal,  
DIGITAL OUT  
PCM / STREAM  
AUDIO OUT  
VIDEO OUT  
AV COMPU LINK  
you can use the AV COMPU LINK function.  
See AV COMPU LINK remote control  
systemon page 56 for details.  
VIDEO  
COAXIAL OPTICAL RIGHT LEFT  
COMPONENT  
Y
P
B
PR  
S-VIDEO  
T V  
S-video cable  
(not supplied)  
Red  
IN  
White Yellow  
S-VIDEO  
Yellow  
White  
VIDEO  
LEFT  
AUDIO  
RIGHT  
Audio/Video cable  
(supplied)  
Red  
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.  
If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo  
audio output to monaural.  
If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit  
using the S-video cable (optional) in addition to the (standard) video connection.  
NOTES  
When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If  
it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see How to  
make the Progressive scan mode activeon page 17.  
Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may  
cause a monitor problem when playing back a copy-protected disc.  
16  
Getting started  
English  
To connect to a TV with the component video input jacks  
You can enjoy high picture quality by connecting the units COMPONENT VIDEO OUT jacks (Y, PB, PR) to the COMPONENT  
VIDEO IN jacks (Y, PB, PR) of your TV with the video cables.  
Blue  
Component video cable  
(supplied)  
Green  
Red  
The unit  
DIGITAL OUT  
PCM / STREAM  
AUDIO OUT  
VIDEO OUT  
AV COMPU LINK  
VIDEO  
S-VIDEO  
COAXIAL OPTICAL RIGHT LEFT  
COMPONENT  
Y
P
B
PR  
Blue  
Red  
Green  
T V  
Red  
White  
IN  
Y
PB  
PR  
S-VIDEO  
VIDEO  
IN  
White  
Red  
LEFT  
AUDIO  
RIGHT  
Audio cable  
(not supplied)  
The unit supports the Progressive scan system as well as the conventional Interlace scan system. If your television or  
monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scan mode  
active.  
How to make the Progressive scan mode active  
Press and hold down the VFP - PROGRESSIVE SCAN button for a few seconds.  
The scan mode switches between the Progressive scan and Interlace scan modes. When the Progressive scan mode is  
selected, the PROGRESSIVE indicator on the front panel is lit in red. This indicator turns green during playback of a film-  
source DVD VIDEO disc while the PROGRESSIVE MODEon the PREFERENCE1display is set to AUTO, FILM or  
SMART (see page 51).  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
+
10  
PLAY  
STANDBY  
3
ANGLE SUBTITLE AUDIO  
VFP  
STANDBY/ON  
STOP PAUSE  
VFP -  
7
8
PROGRESSIVE  
SCAN  
+
7
-
DISC  
4
¢
SKIP  
-
DIGEST  
ZOOM  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
PROGRESSIVE  
SCAN  
PROGRESSIVE  
DVD  
/
VIDEO CD / CD  
SELECT  
3
PROGRESSIVE indicator  
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
REMOTE CONTROL  
You should note that not all Progressive TV and High-Definition TV sets are fully compatible with the unit and may  
cause artifacts to be displayed in the picture. In case of progressive scan picture problems, it is recommended that you  
switch the setting to the Interlace Scanoutput. If there are questions regarding our TV set compatibility with the unit,  
please contact our customer service center.  
All JVC Progressive TV and High-Definition TV sets have no problem. (Example: AV-61S902)  
17  
Getting started  
NOTES  
Connect Yto Y, PBto PB, PRto PRcorrectly.  
When the component video input jacks of the TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack  
(optional).  
When the Progressive scan mode is selected, the VIDEO and S-VIDEO outputs do not feed the correct signals.  
About SCAN MODE  
To display video on the monitor (television) screen, the conventional scanning method is called Interlaced scan.  
With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture  
(frame); i.e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing  
all the even-numbered lines.  
On the other hand, the Progressive scan system scans all horizontal lines at a time, so you can double the number of  
pictures compared with the interlaced scan, resulting flicker-free, high-density picture.  
To enjoy the progressive scanned video, a monitor (or TV or projector) to be connected to the unit must have the  
Progressive inputs.  
Depending on the material source format, DVD VIDEO discs can be classified into two types; film source and video  
source (Note that some DVD VIDEO discs contain both film source and video source). Film sources are recorded as 24-  
frame-per-second information, while (NTSC) video sources are recorded as 30-frame-per-second (60-field-per-second  
interlaced) information.  
When the unit plays back a film source material, uninterlaced progressive output signals are created using the original  
information. When a video source material is played back, the unit interleaves lines between the interlaced lines on  
each to create the pseudo uninterlaced picture and outputs as the progressive signal.  
To connect to an audio amplifier or receiver  
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.  
The unit  
DIGITAL OUT  
PCM / STREAM  
AUDIO OUT  
VIDEO OUT  
AV COMPU LINK  
VIDEO  
COAXIAL OPTICAL RIGHT LEFT  
COMPONENT  
Y
P
B
PR  
S-VIDEO  
Amplifier or receiver  
Red  
White  
IN  
White  
Red  
LEFT  
AUDIO  
RIGHT  
Audio cable  
(not supplied)  
Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.  
NOTE  
When using the unit with a stereo amplifier or receiver, make the DOWN MIXsetting in PREFERENCE 2to Lo/Ro. (See  
page 52.)  
18  
Getting started  
English  
To connect to audio equipment with a digital input  
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an  
amplifier, MD, etc. by using an optional digital cable (OPTICAL or COAXIAL). The digital audio signal from a disc is  
directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by  
using an optional digital cable, you can enjoy high-quality surround sound.  
When you make the digital connection, we recommend also to make the analog connection, because, depending on  
discs, no signal may be output from the DIGITAL OUT.  
The unit  
DIGITAL OUT  
PCM / STREAM  
AUDIO OUT  
VIDEO OUT  
AV COMPU LINK  
VIDEO  
COAXIAL OPTICAL RIGHT LEFT  
COMPONENT  
Y
P
B
PR  
S-VIDEO  
Optical digital cable  
(not supplied)  
White  
Red  
Coaxial digital cable  
(not supplied)  
Digital equipment  
IN  
IN  
White  
LEFT  
OPTICAL  
AUDIO  
RIGHT  
DIGITAL  
COAXIAL  
Audio cable  
(not supplied)  
Red  
The OPTICAL jack is protected by the hinged cover.  
To connect the optical cable to the jack, press the  
cover with the plug and connect it to the jack inside  
in the correct direction.  
NOTES  
When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the DIGITAL AUDIO OUTPUT”  
setting in the PREFERENCE 2on-screen display correctly according to the connected audio equipment. If the DIGITAL  
AUDIO OUTPUTis not set correctly, loud noise may be generated from speakers, causing damage to them. See DIGITAL  
AUDIO OUTPUTon page 51.  
With the digital connection, the COMPRESSIONsettings in the PREFERENCE 2on-screen display are invalid. Settings for  
these items must be made from the decoder.  
19  
Getting started  
To connect the power cord  
When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the  
units  
AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The  
STANDBY indicator lights and setup is completed.  
Warning  
Disconnect the power cord if you are not going to use the unit for a long time.  
Disconnect the power cord before cleaning the unit.  
Disconnect the power cord before moving the unit.  
Do not connect or disconnect the power cord with wet hands.  
Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric shock, or other  
accidents.  
Caution  
Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.  
To prevent any accidents or damages caused by an unsuitable AC power cord, only use the supplied power cord. If the  
cord is damaged, contact a dealer and get the new power cord.  
Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other accidents.  
Using the remote control unit  
Using the remote control, you can operate not only all the functions of the unit but also basic functions of your TV.  
To install batteries in the remote control unit  
The battery compartment is located on the back of the remote control unit.  
1 Press down on the point shown by the arrow at the top of the compartment cover,  
and pull up the cover to open the compartment.  
2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control according  
to the polarity markings (+and “–”) inside the compartment and on the batteries.  
3 Place the cover over the compartment, and press down lightly.  
The batteries will last about six months with normal use. If the functions of the remote control become erratic, replace  
the batteries. See next page for more information.  
20  
Getting started  
Precautions for the safe use of batteries  
English  
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be shortened,  
they may burst or their contents may leak.  
Precaution  
Remove the batteries from the remote control if it is not going to be used for a long period of time.  
Remove dead batteries and dispose of them properly.  
Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into an incinerator.  
Never touch liquid that has leaked out of a battery.  
Do not mix new and old batteries, or batteries of different types, when replacing them.  
Remote sensor  
Operate the remote control unit while pointing it toward the remote sensor on the unit.  
The remote control unit can be used within a range of about 5 meters from the remote sensor. If you operate the  
remote control unit from a diagonal position, controllable distance may be shorter.  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
PLAY  
STANDBY  
3
Remote  
sensor  
STANDBY/ON  
STOP PAUSE  
7
8
7
-
DISC  
4
¢
SKIP  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
PROGRESSIVE  
DVD  
/
VIDEO CD / CD  
TV  
STANDBY/ON  
DVD  
DISC  
SELECT  
TV DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
9
TV-/--  
10  
TV0  
0
MUTING  
+
10  
VFP  
ANGLE SUBTITLE AUDIO  
PROGRESSIVE  
SCAN  
+
DIGEST  
ZOOM  
SELECT  
3
+
CH  
5
ENTER  
VOL  
-
VOL  
+
-
CH  
REMOTE CONTROL  
NOTE  
If the remote sensor on the unit is exposed to the sunshine or strong light, you may not be able to control the unit from the  
remote control unit.  
21  
Getting started  
To use the remote control unit for TV operation  
You can operate your TV from the remote control unit.  
Setting the remote control signal for operating your TV.  
TV  
DVD  
TV - DVD switch  
TV STANDBY/ON  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
DVD STANDBY/ON  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV/VIDEO - CANCEL  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
Numeric buttons  
button  
9
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
SELECT  
3
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
N
O
REMOTE CONTROL  
1 Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below by using the numeric buttons  
(0 to 9).  
Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.  
Example:  
To enter the manufacturer code 01: Press 0then 1.  
2 Press 7 while holding down TV/VIDEO - CANCEL.  
3 Try to operate your TV by pressing TV STANDBY/ON  
.
If your TV turns on or off, you have successfully set the control signal.  
Manufacturer code list  
No. Manufacturer  
No. Manufacturer  
No. Manufacturer  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
JVC  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
GRADIENTE  
SANYO  
PHILCO/DAEWOO  
LG (GOLDSTAR)  
GRUNDIG  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
MIVAR  
FINLUX  
NOKIA  
FUNAI  
PHILIPS/CCE/MAGNAVOX  
MITSUBISHI  
PANASONIC  
RCA  
SHARP  
SONY  
SAMSUNG  
SAMSUNG/PEONY/CHANGHONG  
NEC/GRADIENTE  
PHILCO  
SAMSUNG  
AIWA  
DAEWOO  
JINXING/PEONY  
PEONY  
TOSHIBA  
ZENITH  
BEIJING/NOBLEX  
JVC (ONWA)  
JVC (ONWA)  
JVC (ONWA)  
THOMSON  
FERGUSON  
ITT  
PHILCO/HITACHI  
PANASONIC  
SAMSUNG  
SANYO/SEARS  
TOSHIBA  
KONKA  
TCL  
22  
Getting started  
The following buttons can be used for operating the TV:  
English  
To use the CURSOR (CH, CH+, VOL, VOL+), TV/VIDEO - CANCEL and numeric buttons for TV control, set the  
TV - DVD switch to TV.  
TV  
DVD  
TV  
Turns the TV on or off.  
TV/VIDEO  
CANCEL  
Switches the TV input mode between TV and VIDEO.  
Selects the TV channels directly.  
TV1  
1
TV-/--  
to 10  
TV0  
0
* For some TVs, pressing +10functions as the 100+,while10functions as  
the ENTER button if your TV requires pressing the ENTER button after selecting  
a channel number.  
MUTING  
Mutes the TV sound.  
+
10  
+
CH  
5
Changes the TV channels.  
Adjusts the TV volume.  
-
CH  
VOL  
VOL  
-
+
NOTES  
The remote control unit is initially set operating a JVC TV.  
If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.  
23  
Basic operations  
In the following description, the buttons on the remote control unit are mainly used, however, you may use the  
corresponding buttons on the front panel of the unit if available.  
Turning on/off the unit  
Press DVD STANDBY/ON  
on the remote control unit or press STANDBY/ON  
on the front panel.  
The STANDBY/ON indicator, which illuminates in red during the standby mode, goes off, while each DISC indicator  
(1 through 7) shows the current status of whether a disc is set or not in the corresponding tray.  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
TV  
DVD  
PLAY  
STANDBY  
3
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
STANDBY/ON  
STOP PAUSE  
7
8
DVD STANDBY/ON  
7
-
DISC  
4
¢
SKIP  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
PROGRESSIVE  
DVD  
/
VIDEO CD / CD  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
The first time you turn on the unit after connecting the power cord, the DISC indicators are illuminated until the unit detects that no  
disc is set in the corresponding tray. Once detecting the status, the unit memorizes it unless you unplug the power cord, so the  
DISC indicators show the status of corresponding trays correctly.  
You can directly turn on the unit by pressing the 3, DISC (1 through 7) or 0(OPEN/CLOSE) button while the unit is on standby,  
without pressing the DVD STANDBY/ON  
on the remote control unit or STANDBY/ON  
on the front panel. The behavior of the  
unit after pressing these buttons while the unit is on standby is the same as pressing them while the power is on. See the following  
description in which the unit is assumed that the power is on when starting operations.  
NOTE  
Even if you press the DVD STANDBY/ON  
or STANDBY/ON  
button to turn off the unit, the unit is not disconnected from  
the AC power source as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit  
consumes a very small amount of power.  
Inserting and removing discs  
Up to 7 discs can be set on the disc tray carousel.  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
EXCHANGE  
DISC SKIP  
0
0(OPEN/CLOSE) button  
PLAY  
STANDBY  
3
STANDBY/ON  
STOP PAUSE  
7
8
7
-
DISC  
4
¢
SKIP  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
PROGRESSIVE  
DVD  
/
VIDEO CD / CD  
EXCHANGE/ DISC SKIP button  
1Press0(OPEN/CLOSE) on the front panel.  
The carousel opens and you can access to two of seven trays.  
From the second time on, the carousel opens with the previously played disc on the left-front tray.  
24  
Basic operations  
2Press EXCHANGE/ DISC SKIP to select accessible trays if required.  
English  
Each press of the button rotates the carousel clockwise by an amount for accessing the next two trays.  
3Place one or two discs in the tray(s).  
With the label side up  
E
S
O
L
/C  
N
E
P
O
0
Y
A
L
P
3
E
G
IP  
N
K
A
S
H
C
C
IS  
X
E
D
7
C
IS  
D
6
C
IS  
D
5
C
IS  
D
4
C
IS  
D
3
C
IS  
D
2
C
I
I
S
D
1
C
IS  
D
To insert an 8-cm disc,  
C
DIS E  
-
C
7
G
N
A
H
X
E
&
Y
A
L
P
place it in the inner recess.  
Y
B
D
N
4
A
T
S
N
O
Y
B
D
N
A
T
S
R
E
Y
A
L
P
D
/C  
D
V
D
4Repeat steps 2 and 3 if you wish to set one or more discs to other trays.  
5Press 0(OPEN/CLOSE).  
The carousel closes.  
The disc set in the front left tray when the carousel closes is loaded for playback. If no disc is set in the front left tray  
when the carousel closes, the unit rotates the carousel clockwise until it finds a disc for loading. If no disc is set at  
all in the carousel, NO DISCappears in the display window.  
When a disc is loaded, the unit reads the information of the disc and the appropriate opening display according to  
the disc type appears on the TV screen (see page 11).  
NOTES  
Do not set a non-playable disc. For details about playable and non-playable disc types, see page 15.  
When placing a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the  
tray is closed, or the disc may not be removed from the unit.  
Do not use any stabilizer when playing back a disc.  
With most DVD VIDEO discs, the unit starts playback automatically after inserting the disc and pauses at the menu screen.  
If you insert a DVD VIDEO disc whose region code does not match the unit, REGION CODE ERROR!is shown in the DVD  
opening display. For detail about the region code, see page 15.  
25  
Basic operations  
Basic playback  
Note that this section describes basic operations for playback of DVD VIDEO, Audio CD and Video CD discs. For MP3 disc  
playback, see the independent chapter on and after page 46.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
OPEN/CLOSE  
DISC  
1
DISC  
2
DISC  
3
DISC  
4
DISC  
5
DISC  
6
DISC  
7
PROGRESSIVE  
SCAN  
+
EXCHANGE  
DISC SKIP  
0
-
PLAY  
DIGEST  
ZOOM  
STANDBY  
3
STANDBY/ON  
STOP PAUSE  
7
8
7
-
DISC  
4
¢
SKIP  
Basic  
control  
buttons  
PLAY  
&
EXCHANGE  
DVD/CD PLAYER  
SELECT  
3
PROGRESSIVE  
DVD  
/
VIDEO CD CD  
/
+
CH  
5
VOL  
-
VOL  
+
Basic control buttons  
ENTER  
-
CH  
REMOTE CONTROL  
To start playback  
Press 3.  
or  
Press a desired DISC (1 through 7) button on the front panel, or press DISC SELECT followed by a  
desired numeric (1 through 7) button on the remote control unit.  
By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the  
carousel (see the previous page for details about which disc is loaded for playback).  
By the latter operation (using DISC, or DISC SELECT + numeric buttons), the unit starts playback from the disc set in  
the specified tray. If no disc is set in the specified tray, the unit rotates the carousel clockwise until it finds a disc for  
playback.  
Regardless of operations for starting playback, the unit plays all available discs sequentially until you stop playback.  
With some discs, which automatically goes to the menu screen and waits for the next instruction, the unit does not  
move to the next disc.  
About DISC indicators (1 through 7)  
Each DISC indicator shows the current status of the corresponding tray as follows.  
Illuminates if a disc is set in the corresponding tray.  
Flashes when the corresponding disc is being played back.  
Unlit if no disc is set in the corresponding tray.  
NOTES  
Once a tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator lights  
regardless of whether or not a disc is set.  
When the resume point is memorized, pressing 3starts playback from that point instead of the beginning. See page 29.  
During playback, the display window shows the title/chapter or track number being played.  
With Video CD discs with PBC control or some DVD discs, the menu display may appear on the TV screen after starting  
playback. In such a case, select an item to be played back from the menu. Otherwise, the playback cannot go forward.  
For operation using a menu, see page 30.  
When a DVD disc is set in the front left tray, the unit usually starts playback automatically after closing the carousel and reading  
the disc contents.  
26  
Basic operations  
English  
To stop playback completely  
Press  
7.  
The unit stops playback.  
If you press 0(OPEN/CLOSE) during playback, the unit stops playback and opens the tray carrousel.  
To stop playback temporarily  
Press 8.  
The unit pauses playback. To resume playback, press 3.  
.
To advance or reverse playback rapidly while monitoring  
During playback  
Method 1 (from the remote control unit only)  
Press 1or ¡.  
Each press of 1or ¡increases the playback speed. You can select the speed among 2x, 5x, 20x and 60x the  
normal speed.  
Pressing 3returns the unit to normal playback.  
Method 2  
Hold down 4or ¢.  
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly at 4 times the  
normal speed. Releasing the button returns the unit to normal playback.  
27  
Basic operations  
To locate the beginning of the scene or song  
During playback  
Press 4or ¢.  
Press 4to locate the beginning of the current chapter, title, or track, and press ¢to locate the beginning of the  
next chapter, title, or track.  
NOTE  
When you play a Video CD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will  
generally locate the beginning of the chapter, title or track.  
Changing discs during playback [PLAY EXCHANGE]  
You can open the carousel during playback and change discs that are not being played back.  
During playback (with the carousel closed)  
In this condition, you can see the  
EXCHANGE/ DISC SKIP indicator is illuminated in green.  
1Press EXCHANGE/ DISC SKIP.  
The carousel opens without interrupting playback, while the  
EXCHANGE/ DISC SKIP indicator goes off.  
EXCHANGEis briefly shown in the display window.  
2Set, remove or change discs in the accessible trays.  
3To access to the other trays, press EXCHANGE/ DISC SKIP.  
Each press of the button rotates the carousel, however, the tray corresponding to the disc being played back is  
never accessible.  
NOTES  
During the steps 2 and 3 above, only the 7, 8, 4/¢, 1and ¡buttons are effective for the disc being played back.  
For details about functions of the  
EXCHANGE/ DISC SKIP button, see the appropriate section on page 25.  
28  
Basic operations  
English  
Resuming playback  
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.  
To memorize the interrupted position  
During playback  
Press 7, or press DVD STANDBY/ON  
panel.  
on the remote control unit or STANDBY/ON  
on the front  
The unit memorizes the interrupted position.  
RESUMEappears in the display window for a few seconds.  
If you interrupt playback by pressing  
7
and then turn off the power, the memory is not cleared.  
To resume playback  
While the disc you interrupt playback last time is still loaded in the disc tray  
Press 3.  
The unit starts playback from the position where you interrupted playback last time.  
RESUME PLAYappears in the display window for a few seconds.  
To clear the resume position memory  
Carry out one of the followings.  
* Open the carousel.  
* Press  
7
while stopped.  
* Press any of the DISC buttons (1 through 7) on the front panel, or the DISC SELECT button followed by any of the 1  
through 7 numeric buttons.  
NOTES  
The resume function does not work with Audio CD and MP3 discs.  
In the case of a Video CD disc with PBC function, the unit may resume playback from a point slightly earlier or later than the  
resume point you stored.  
29  
Advanced operations  
Note that this section describes operations for  
playback of DVD VIDEO, Audio CD and Video CD discs.  
For MP3 disc playback, see the independent chapter on  
and after page 46.  
2Use CURSOR 5//2/3to select a desired  
item, then press ENTER.  
The unit starts playback of the selected item.  
Make sure that the TV - DVD  
switch is set to DVDwhen using  
the CURSOR 5//2/3, numeric  
and TV/VIDEO - CANCEL buttons  
for controlling the unit.  
TV  
DVD  
With some discs, you can also select items by entering the  
corresponding number using the numeric buttons, which  
may cause the unit to automatically start playback.  
NOTES  
When  
Playing from a specific  
position on a disc  
appears on the TV screen by pressing TITLE in  
step 1:  
The disc does not have a menu listing the titles.  
When appears on the TV screen by pressing MENU  
in step 1:  
You can play a disc from the selected track, title or  
chapter, or from the specified time.  
The disc does not have a menu.  
The MENU button does not work while stopped.  
To locate a desired scene from the DVD  
menu  
To locate a desired scene from the menu  
of the Video CD with PBC  
DVD VIDEO discs generally have their own menus which  
show the disc contents. These menus contain various  
items such as titles of a movie, names of songs, or artist  
information, and display them on the TV screen. You can  
locate a desired scene by using the menu.  
Some Video CD discs supports the PBC function. PBC is  
an abbreviation of PlayBack Control.A Video CD disc  
recorded with PBC has its own menus, such as a list of  
the songs of the disc. You can locate a specific scene by  
using the menu.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV  
DVD  
TV1  
TV2  
TV3  
STANDBY/ON  
1
2
3
DISC  
SELECT  
TV  
DVD  
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
9
TV-/--  
10  
TV0  
0
MUTING  
TV1  
TV2  
TV3  
+
10  
1
2
3
ANGLE SUBTITLE AUDIO  
VFP  
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
9
2
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
SELECT  
3
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
1
+
CH  
SELECT  
5
3
VOL  
-
VOL  
+
1
ENTER  
2
-
CH  
N
E
E
+
CH  
R
C
S
N
O
5
VOL  
-
VOL  
+
ENTER  
REMOTE CONTROL  
-
CH  
REMOTE CONTROL  
Whenever a DVD VIDEO disc is loaded  
1Press TITLE or MENU.  
When a Video CD disc with PBC is stopped  
The menu appears on the TV screen.  
1Press 3.  
A disc menu  
Example:  
About menu  
appears on the TV  
screen (The PBC  
function is  
Normally, a DVD VIDEO disc  
Example:  
which contains more than  
one title may have a title”  
menu which lists the titles. In  
this case, the menu appears  
on the TV screen by pressing  
the TITLE button. Some DVD  
VIDEO discs may also have a  
different menu which  
activated).  
PBCis indicated in the display window on the  
front panel.  
appears by pressing the  
MENU button.  
2Use the numeric buttons to select the desired  
See the instructions of each DVD VIDEO disc for its particular  
menu.  
item.  
See page 14 for details about how to use the  
numeric buttons.  
30  
Advanced operations  
The unit starts playback of the selected item.  
You can return to the menu by pressing the  
RETURN button.  
Depending on the disc type and the unit status,  
what is specified differs.  
English  
What is  
specified  
When NEXTor PREVIOUSappears on the TV  
screen, the unit generally works as follows:  
Pressing ¢advances to the next page.  
Pressing 4returns to the previous page.  
* The method of the operation is different  
depending on the disc.  
Unit status  
Disc type  
DVD VIDEO  
title or chapter(*)  
While stopped  
Audio CD/ Video CD track  
DVD VIDEO  
chapter  
During playback  
Audio CD/ Video CD track  
To activate the PBC function when a PBC-compatible Video  
CD disc is being played back without the PBC function,  
press 7then press 3.  
* If a disc contains more than one title, a title is  
specified. If a disc contains only one title, a chapter  
is specified.  
You can also activate the PBC function using the on screen  
menu display as follows.  
1 Press ON SCREEN.  
The selected title or track number appears in the  
display window on the front panel.  
2 Use CURSOR 5/to move  
to [PBC CALL], then press  
ENTER.  
If you want to playback a PBC-compatible Video CD disc  
without activating the PBC function, start playback by using  
the numeric buttons instead of the 3. See the next  
paragraph.  
NOTES  
During DVD VIDEO playback, if a menu is shown on the  
TV screen, the numeric buttons may be used for  
selecting an item in the menu.  
When  
appears on the TV screen:  
The title or track you have selected is not contained in  
the disc.  
To locate a desired selection using the  
numeric buttons  
This function does not work during Video CD playback  
with PBC function.  
You can locate a desired title or chapter (DVD VIDEO) or  
track (Audio CD/Video CD) by specifying the number.  
To locate a desired selection using  
.
4or ¢  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
You can locate the beginning of a chapter (for DVD  
VIDEO) or track (for Audio CD/Video CD) by using the  
4or ¢.  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
1
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
TV  
DVD  
DIGEST  
ZOOM  
+
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
SELECT  
REPEAT PHONIC CANCEL RETURN  
3
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
+
CH  
9
5
VOL  
-
VOL  
+
TV-/--  
10  
MUTING  
+
10  
ENTER  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
CH  
-
DIGEST  
ZOOM  
1
SELECT  
REMOTE CONTROL  
3
+
CH  
5
For DVD VIDEO/Audio CD:  
VOL  
-
VOL  
+
ENTER  
During playback or while stopped  
During playback without PBC function  
or while stopped  
-
CH  
For Video CD:  
REMOTE CONTROL  
1Use the numeric buttons to specify the number.  
For DVD VIDEO: During playback  
*
*
*
During DVD VIDEO playback (except when a  
menu is shown), a chapter is specified.  
While a DVD VIDEO is stopped, a title is  
specified.  
For Audio CD:  
For Video CD:  
During playback or while stopped  
During playback without PBC function  
1Press 4or ¢.  
For an Audio CD or Video CD, a track is  
specified.  
The unit starts playback from the beginning of the  
With an Audio CD or Video CD, pressing the button  
skips a track. With a DVD VIDEO disc, pressing the  
button skips a chapter or title depending on the disc  
configuration.  
selection.  
See page 14 for details about how to use the  
numeric buttons.  
The selection number appears in the display  
window on the front panel.  
31  
Advanced operations  
To skip forward chapters/tracks, press ¢as  
many times as required.  
To skip to the beginning of the current track/  
chapter, press 4once.  
4Press ENTER.  
The unit starts playback from the selected chapter.  
To skip back chapters/tracks, press 4as many  
times required.  
The 10and +10buttons are not used in this function.  
NOTES  
NOTES  
You can also locate a desired chapter directly by  
specifying the chapter number using the numeric  
buttons during playback (except when a menu is  
shown). See page 31.  
You can skip tracks within the current disc only.  
This function may not work with some DVD VIDEO  
discs.  
This function does not work during Video CD playback  
with PBC function.  
When the chapter number is incorrect in step 3:  
Overwrite the incorrect number with the correct  
number.  
When  
is displayed on the TV screen in step 4:  
To locate a desired scene by specifying  
the chapter number [CHAP.SEARCH]  
The chapter you have selected is not contained in the  
disc, or chapter search does not work on the disc.  
To return to the regular display:  
Press ON SCREEN.  
If the current title of a DVD VIDEO disc being played is  
divided into chapters, you can skip to a desired chapter  
by specifying the chapter number using the on-screen  
display.  
To locate a desired position in the  
current title or track [TIME SEARCH]  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
You can play a disc from the desired position by  
specifying the elapsed time from the beginning of the  
current title or track using the TIME SEARCH function.  
Note that some DVD VIDEO discs do not contain time  
information, and the TIME SEARCH function cannot be  
used.  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
3
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
SELECT  
3
2-2, 4  
1
+
CH  
TV  
DVD  
5
VOL  
-
VOL  
+
STANDBY/ON  
DISC  
2-1  
TV  
DVD  
SELECT  
ENTER  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
-
CH  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
3
9
TV-/--  
10  
MUTING  
During DVD VIDEO playback  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
1Press ON SCREEN.  
SELECT  
The on-screen display appears on the TV screen.  
3
2Use CURSOR 5/to move  
to [CHAP.  
2-2, 4  
1
+
CH  
5
VOL  
-
VOL  
+
2-1  
SEARCH], then press ENTER.  
ENTER  
-
CH  
GO TO CHAPTER  
=appears in the  
message area.  
1 / 3  
ANGLE  
REMOTE CONTROL  
2 / 3  
AUDIO  
SUBTITLE  
1 / 3  
The color of [CHAP.  
SEARCH] changes.  
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
TIME  
3
1 : 34 : 58  
CHAPTER  
3
For DVD VIDEO: During playback  
10Mb  
GO TO CHAPTER=  
For Audio CD:  
For Video CD:  
During playback or while stopped  
During playback without PBC function  
or while stopped  
Message area  
1Press ON SCREEN.  
3Use the numeric buttons (0 to 9) to enter the  
The on-screen display appears on the TV screen.  
desired chapter number.  
Example:  
2Use CURSOR 5/to move  
to [TIME  
To select chapter number 8:  
Press 8ENTER.  
To select chapter number 37:  
Press 37ENTER.  
The specified number appears in the message area.  
SEARCH], then press ENTER.  
GO TOappears in the message area.  
The color of [TIME SEARCH] changes.  
32  
Advanced operations  
3Use the numeric buttons (0 to 9) to enter the  
time.  
English  
NOTES  
When  
appears on the TV screen in step 2:  
The specified time appears in the message area.  
The time you have selected is not contained on the disc,  
or the Time search function does not work on the disc.  
4Press ENTER.  
Also note that the Time search function does not work  
during Video CD playback with the PBC function.  
The unit starts playback from the specified time.  
To return to the regular display:  
(for DVD VIDEO)  
(for Audio CD)  
Press ON SCREEN.  
The TIME SEARCH function cannot be used during  
program playback.  
MIN  
SEC  
EACH  
TRACK  
1
TIME 3 : 54  
REMAIN  
1 / 3  
2 / 3  
1 / 3  
ANGLE  
TIME SELECT  
AUDIO  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
MIN  
SEC  
SUBTITLE  
GO TO 2 : 34  
1
9
2
3
4
5
6
7
8
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
10 11 12 13 14 15 16  
St.  
0
End  
TITLE  
TIME  
3
CHAPTER  
3
1 : 34 : 58  
10Mb  
17 18 19 20 21 22 23 24  
GO TO  
1
: 3 4 : 0 0  
ENTER  
To locate a desired scene from the  
display [DIGEST]  
Selected time  
Message area  
Selected time  
Message area  
The unit can display the opening scene of each title or  
chapter on a DVD VIDEO or each track of a Video CD. You  
can select a desired scene from those displayed on the  
TV screen.  
(for Video CD)  
• “10and +10buttons  
are not used with this  
function.  
L / R  
AUDIO  
REPEAT  
You can specify the time  
in hour/minute/second  
format for DVD VIDEO  
discs, and in minute/  
second format for Audio  
and Video CD discs.  
A-B REPEAT  
TIME SEARCH  
PBC CALL  
St.  
0
End  
TRACK  
3
10Mb  
TIME 34 : 58  
TV  
DVD  
ENTER  
GO TO 0 2 : 3 4  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
Selected time  
Message area  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
Example (for DVD VIDEO)  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
To playback from 2(H):34(M):00(S)  
1
2
SELECT  
3
*2ꢀ72ꢀꢀBꢀꢆꢀBꢀBꢀꢆꢀBꢀB  
3
+
CH  
Press 2.  
5
VOL  
-
VOL  
+
ENTER  
*2ꢀ72ꢀꢀꢇꢀꢆꢀBꢀBꢀꢆꢀBꢀB  
-
CH  
Press 3.  
REMOTE CONTROL  
*2ꢀ72ꢀꢀꢇꢀꢆꢀBꢀꢆꢀBꢀB  
Press 4.  
For DVD VIDEO:  
For Video CD:  
While stopped or during playback  
While stopped or during playback  
without PBC function  
*2ꢀ72ꢀꢀꢇꢀꢆꢉꢀꢆꢀBꢀB  
Press ENTER  
1Press DIGEST.  
Up to nine opening scenes are displayed.  
You do not have to press 0to enter the trailing zeros  
(for the last two digits in the example above).  
Of course, it is possible to enter them.  
When you make a mistake  
Move the cursor to the incorrect value, then press the  
correct button to re-select the value.  
*2ꢀ72ꢀꢀꢇꢀꢆꢈꢀꢅꢀꢆꢀBꢀB  
Press CURSOR 2.  
*2ꢀ72ꢀꢀꢇꢀꢆꢀBꢀꢆꢀBꢀB  
Press 4.  
*2ꢀ72ꢀꢀꢇꢀꢆꢉꢀꢆꢀBꢀB  
33  
Advanced operations  
While a DVD VIDEO disc is stopped:  
The opening scene of each title appears on the TV  
screen.  
Special picture playback  
The unit provides special picture playback functions  
During DVD VIDEO disc playback:  
The opening scene of each chapter in the current  
title appears on the TV screen.  
When a Video CD disc is loaded:  
The opening scene of each track appears on the  
TV screen.  
including Frame-by-frame, Strobe, Slow-motion and Zoom.  
To advance a still picture  
frame-by-frame  
2Use CURSOR 5//2/3to move to select  
SCAN  
+
-
DIGEST  
ZOOM  
the desired scene.  
SELECT  
If there are more than 9 scenes, the digest screen  
will have more than one page. In this case, pressing  
¢advances to the next page, while pressing  
4returns to the previous page.  
3
1
CH+  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
N
O
REMOTE CONTROL  
While paused (still)  
1Press 8.  
Each time you press 8, the still picture advances to  
the next frame.  
Selected scene  
Pressing 3returns to normal playback.  
To display continuous still pictures  
[STROBE]  
When the lower right scene is selected, pressing CURSOR  
3advances to the next page if available. Similarly, when  
the upper left scene is selected, pressing CURSOR 2  
returns to the previous page (if available).  
TV  
DVD  
Depending on discs, it may take some time until all scenes  
of the current page appear on the TV screen. If you want to  
turn the page, you do not have to wait to press 4or ¢  
until all scenes appear.  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
3Press ENTER.  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
ZOOM  
The unit starts playback from the selected scene.  
-
DIGEST  
+
SELECT  
3
NOTE  
1, 2  
With some discs, depending on the contents, it may  
take some time until all the scenes appear on the  
screen.  
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
REMOTE CONTROL  
During playback  
1At the point you want to view as continuous  
photographs, press 8.  
The unit pauses playback.  
2Press and hold 8for more than 1 second.  
Nine continuous still  
pictures appear on the  
TV screen.  
34  
Advanced operations  
English  
To zoom in/out [ZOOM]  
Pressing 8when the nine still pictures are shown will  
advance pictures frame by frame.  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
To cancel strobe play  
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
Press and hold 8for more than 1 second.  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
1
2
SELECT  
3
NOTES  
The sound is muted during STROBE playback.  
+
CH  
5
If you press and hold 8for more than 1 second during  
playback, nine still pictures also appear but they  
advance in normal playback speed.  
VOL  
-
VOL  
+
ENTER  
-
CH  
REMOTE CONTROL  
During playback or while paused  
To playback in slow-motion  
[SLOW]  
1Press ZOOM + or –.  
The unit zooms in by pressing ZOOM + or zooms  
out by pressing ZOOM .  
TV  
DVD  
Each time you press ZOOM +, the magnification is  
doubled (up to x 1024).  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
Each time you press ZOOM , the magnification is  
halved (down to x 1/8).  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
SELECT  
3
1
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
N
O
REMOTE CONTROL  
ZOOM x 4  
During playback  
1Press 8, then use 1/¡.  
To play forward slow-motion, press ¡, and to play  
reverse slow-motion (for DVD VIDEO discs only),  
press 1. First, the unit plays the slowest speed,  
and each time you press the button, the playback  
speed increases.  
At the top-left of the screen, the information for the  
current magnification appears, as well as the  
zoomed-in position of the scene that can be moved  
by operating the next step.  
To return to normal playback  
Press 3.  
2Use CURSOR 5//2/3to move the zoomed  
To pause slow-motion playback  
position.  
Press 8.  
ZOOM x 4  
NOTES  
The sound is muted during slow-motion playback.  
Reverse slow-motion playback is not possible for a  
Video CD.  
To return to normal playback  
Press ENTER.  
NOTE  
While zoomed, the picture may look coarse.  
35  
Advanced operations  
Up to 24 tracks can be programmed. You may  
select the same track more than once.  
Changing the playback  
order  
PRESS NUMERIC KEY  
7
1
2
3
4
5
6
8
1
9
5
8
10  
10 11 12 13 14 15 16  
You can play tracks on a Audio or Video CD disc currently  
loaded in the desired order or in random order using the  
Program or Random playback function.  
Note that you cannot use these functions among  
multiple discs.  
17 18 19 20 21 22 23 24  
Selected track number  
If you specify a wrong selection  
To playback in the desired order  
[PROGRAM]  
Press TV/VIDEO - CANCEL button. The last selection  
programmed is erased.  
To clear the program  
You can play tracks on an Audio CD/Video CD disc in the  
desired order by using the Program function.  
Press 7.  
TV  
DVD  
4Press 3to start program play.  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
When all of the programmed tracks have finished  
playback, the unit stops but the program remains.  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
3
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
NOTES  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
You cannot use the program playback function among  
discs set in the carousel. You can program only tracks  
on the disc currently loaded.  
SELECT  
4
3
During program playback, pressing ¢skip to the next  
selection of the program. Pressing 4returns to the  
beginning of the current selection.  
2-2  
1
+
CH  
5
VOL  
-
VOL  
+
2-1  
ENTER  
-
CH  
N
E
E
R
C
S
N
O
To quit program playback  
REMOTE CONTROL  
Press ENTER when  
points [PROGRAM].  
[PROGRAM] returns to its original color.  
(When playing back a Video CD, you have to press 7  
and then press ON SCREEN to bring up the on-screen  
display.)  
While stopped  
1Press ON SCREEN.  
The on-screen display appears on the TV screen.  
To clear the program  
While stopped and the on-screen display is shown on  
2Use CURSOR 5/to move  
[PROGRAM] and press ENTER.  
The color of [PROGRAM] changes.  
to  
the TV screen, move  
to [PROGRAM] and then  
press 7. All the programmed tracks are erased.  
You can also clear the program by opening the  
carousel or changing the current disc.  
(for Audio CD)  
(for Video CD)  
MIN  
SEC  
EACH  
MIN  
SEC  
EACH  
TRACK  
1
TIME 3 : 54  
REMAIN  
TRACK  
1
TIME 3 : 54  
REMAIN  
TIME SELECT  
TIME SELECT  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
PRESS NUMERIC KEY  
6
PRESS NUMERIC KEY  
7
1
9
2
3
4
5
7
8
1
9
2
3
4
5
6
8
10 11 12 13 14 15 16  
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
17 18 19 20 21 22 23 24  
The program table appears on the on-screen  
display (as shown above).  
The PROGRAMindicator lights in the display  
window on the front panel.  
3Specify tracks on the disc loaded in the  
desired order using the numeric buttons.  
See page 14 for details about how to use the  
numeric buttons.  
36  
Advanced operations  
English  
To playback in random order  
[RANDOM]  
You can play tracks on an Audio CD or Video CD disc in  
random order by using the Random function.  
Repeat playback  
You can repeat playback of the current selection or all disc  
contents on the disc currently loaded (except DVD VIDEO).  
You can also repeat playback of a desired part.  
Note that you cannot repeat playback of multiple discs.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
To repeat the current selection or all  
tracks [REPEAT]  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
Method 1  
SELECT  
3
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
+
CH  
TV  
DVD  
3
1
5
VOL  
-
VOL  
+
2
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
ENTER  
1
TV1  
TV2  
TV3  
1
2
3
-
CH  
N
E
E
R
C
TV4  
TV5  
TV6  
S
N
O
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
REMOTE CONTROL  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
While stopped  
SELECT  
3
1Press ON SCREEN.  
+
CH  
5
The on-screen display appears on the TV screen.  
VOL  
-
VOL  
+
ENTER  
-
CH  
2Use CURSOR 5/to move  
to [RANDOM].  
(for Video CD)  
(for Audio CD)  
REMOTE CONTROL  
MIN  
SEC  
MIN  
SEC  
EACH  
EACH  
TIME 3 : 54  
REMAIN  
TRACK  
1
TRACK  
1
TIME 3 : 54  
REMAIN  
TIME SELECT  
TIME SELECT  
For DVD VIDEO:  
For Audio CD/Video CD: In any condition except  
Video CD playback with PBC  
During playback  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
PRESS ENTER =EXECUTE  
PRESS ENTER =EXECUTE  
1
9
2
3
4
5
6
7
8
1
9
2
3
4
5
6
7
8
10 11 12 13 14 15 16  
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
17 18 19 20 21 22 23 24  
1Press REPEAT.  
Each time you press REPEAT, the repeat mode  
toggles among All repeat, Repeat 1 and OFF.  
You can see the selected mode by icons in the  
display window on the front panel as below.  
3Press ENTER.  
The color of [RANDOM] changes.  
The unit starts random playback.  
The RANDOMindicator appears in the display  
window on the front panel. After playing all tracks  
of the disc loaded, random playback ends.  
:
Repeats the current title for DVD VIDEO or  
the all tracks on the current disc for Audio  
CD/Video CD.  
1
:
Repeats the current chapter for DVD  
VIDEO or the current track for Audio  
CD/Video CD.  
The same track will not be played back more than once  
during random play.  
No indication:The repeat mode is off.  
During Audio CD playback, pressing ENTER when  
points  
[RANDOM] quits random mode and continues playback in  
the normal order.  
(Display window)  
LPCM  
MPEG  
DOLBY  
DIGITAL  
DTS  
-
VCDVD  
38  
TITLE TRACK CHAP  
1
A B  
PROGRAM  
To quit random playback in the middle  
RANDOM  
Press 7. The unit stops playback and quits the  
random playback mode.  
You can also clear the random mode by opening the  
carousel or changing the current disc.  
Repeat mode  
indicators  
NOTE  
Random playback is carried out only within the disc  
currently loaded.  
37  
Advanced operations  
The selected mode is also shown on the on-screen  
display, however, it is shown in the different way  
from the display window. The following table  
shows the relation between them.  
Method 2  
SELECT  
3
+
CH  
2-2  
1
5
ENTER  
VOL  
-
VOL  
+
2-1  
Disc type  
On-screen display Display window  
-
CH  
N
E
E
R
C
S
N
O
TITLE REPEAT  
DVD VIDEO  
REMOTE CONTROL  
CHAPTER REPEAT  
REPEAT ALL  
REPEAT 1  
1
1
Audio CD/  
Video CD  
For DVD VIDEO:  
During playback  
For Audio CD/Video CD: In any condition except  
Video CD playback with PBC  
To stop repeat playback  
1Press ON SCREEN.  
Press 7.  
The on-screen display appears on the TV screen.  
When a DVD VIDEO disc is set, the unit stops playback  
and quits the repeat mode.  
When an Audio CD or Video CD disc is set, the unit  
stops playback but does not quit the repeat mode.  
2Use CURSOR 5/to move  
to [REPEAT],  
then press ENTER.  
Each time you press ENTER, the repeat mode  
changes as follows depending on the disc type and  
units status:  
To quit repeat playback  
Perform one of the following:  
* Press REPEAT until the repeat mode indicator  
goes off in the display window.  
During DVD VIDEO playback  
* When  
points [REPEAT], press ENTER  
repeatedly until [REPEAT] returns to its original  
color.  
1 / 3  
ANGLE  
2 / 3  
AUDIO  
You can also clear the repeat mode by opening the  
carousel or changing the current disc.  
SUBTITLE  
1 / 3  
TITLE REPEAT  
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
TIME  
3
1 : 34 : 58  
CHAPTER  
3
10Mb  
PRESS ENTER  
EXECUTE  
NOTES  
The repeat function can be applied only to the disc  
currently being played back.  
Selected repeat mode  
When the program playback mode is active with an  
Audio CD or Video CD, the repeat mode changes in the  
same manner (i.e. toggles among REPEAT ALL, REPEAT  
1 and no indication). Note that, however, in the  
REPEAT ALLmode the unit repeats all the  
TITLE REPEAT  
(current title repeat)  
CHAPTER REPEAT  
(current chapter repeat)  
programmed tracks, instead of all tracks on the disc.  
If  
appears when pressing ENTER in step 2 above  
during DVD VIDEO playback  
No indication (off)  
You cannot repeat the title or chapter because of the  
disc contents.  
Audio CD/Video CD  
(for Audio CD)  
Repeat playback function cannot be used during Video  
CD playback with PBC function.  
(for Video CD)  
To turn off the on-screen display  
MIN  
SEC  
EACH  
TRACK  
8
TIME 0 : 58  
TIME SELECT  
REPEAT ALL  
L / R  
AUDIO  
Press ON SCREEN.  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
REPEAT ALL  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PBC CALL  
St.  
0
End  
TRACK  
3
10Mb  
TIME 34 : 58  
EXECUTE  
PRESS ENTER  
Selected repeat mode  
Selected repeat mode  
REPEAT ALL  
(repeats the all tracks  
on the current disc)  
REPEAT 1 (current track repeat)  
No indication  
(off)  
38  
Advanced operations  
is pointed at  
English  
To repeat a desired part  
[A-B REPEAT]  
During playback, pressing ENTER when  
[A-B REPEAT] quits A-B repeat mode and continues  
playback.  
You can also quit A-B repeat mode by pressing 4or ¢.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
NOTES  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
Points A and B must be specified on the same track or  
chapter.  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
After specifying point A, if you do not specify point B  
until the playback position moves to the next track/  
chapter, the unit quits the A-B repeat mode and the  
color of [A-B REPEAT] on the on-screen display returns  
to its original color.  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
SELECT  
3
To turn off on-screen display  
+
CH  
5
VOL  
-
VOL  
+
2-1  
Press ON SCREEN.  
2-2, 3  
ENTER  
If  
appears when pressing ENTER in step 2 during  
-
CH  
1
DVD VIDEO playback  
You cannot repeat the selected portion because of the  
disc contents.  
REMOTE CONTROL  
During playback  
1Press ON SCREEN.  
The on-screen display appears on the TV screen.  
2Use CURSOR 5/to move  
to [A-B  
REPEAT], then press ENTER at the beginning  
of the part you want to repeat (point A).  
The color of [A-B REPEAT] changes.  
3Press ENTER at the end of the part you want  
to repeat (point B).  
The unit locates Aand starts repeat playback  
between Aand B.”  
(for DVD VIDEO)  
(for Audio CD)  
MIN  
SEC  
EACH  
TRACK  
8
TIME 0 : 58  
1 / 3  
2 / 3  
1 / 3  
ANGLE  
TIME SELECT  
AUDIO  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
MIN  
SEC  
MIN  
SEC  
SUBTITLE  
A
1
2 9 : 2 3  
B
3 0 : 0  
9
2
3
4
5
6
7
8
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
9
10 11 12 13 14 15 16  
St.  
0
End  
TITLE  
TIME  
3
0 : 08 : 52  
CHAPTER  
1
10Mb  
17 18 19 20 21 22 23 24  
A 0 : 0 0 : 0 3  
B 0 : 0 8 : 5 2  
Point A  
Point B  
(for Video CD)  
Point A  
Point B  
L / R  
AUDIO  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PBC CALL  
St.  
0
End  
TRACK  
3
10Mb  
TIME 35 : 22  
3 5 : 2 2  
A
3 4 : 5 8  
B
Point A  
Point B  
To quit A-B repeat playback  
Press 7. The unit stops playback and quits A-B repeat  
mode.  
You can also clear the A-B repeat mode by opening  
the carousel or changing the current disc.  
39  
Advanced operations  
NOTES  
The Angle selection display will automatically  
Selecting a scene angle of  
DVD VIDEO  
disappear if you do not change the angle for several  
seconds.  
To turn off the Angle selection display manually, press  
ENTER.  
You can enjoy a variety of scene angles if the DVD VIDEO  
disc contains multi-angleparts, where multiple cameras  
were used to shoot the same scene from different angles.  
When  
appears on the TV screen  
The current scene is not recorded from multiple angles.  
From on-screen display  
At the beginning of a multi-anglepart,  
appears on the  
TV screen.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
To select a scene angle from the normal  
screen [ANGLE]  
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
2, 3  
3
-
DIGEST  
ZOOM  
+
From normal screen  
SELECT  
3
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
2
1
CH+  
5
VOL  
-
VOL  
+
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
ENTER  
TV1  
TV2  
TV3  
1
2
3
-
CH  
N
E
E
R
TV4  
TV5  
TV6  
C
S
N
O
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
REMOTE CONTROL  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
1, 2  
-
DIGEST  
ZOOM  
During DVD VIDEO playback  
SELECT  
3
1Press ON SCREEN.  
+
CH  
5
VOL  
-
VOL  
+
The on-screen display appears on the TV screen.  
ENTER  
-
CH  
2Use CURSOR 5/or ANGLE to move  
to  
2
[ANGLE].  
REMOTE CONTROL  
The total number of  
recorded angles  
During DVD VIDEO playback  
1Press ANGLE.  
1 / 3  
ANGLE  
2 / 3  
AUDIO  
The Angle selection  
display appears on the  
TV screen.  
SUBTITLE  
1 / 3  
1 / 3  
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
TIME  
3
1 : 34 : 58  
CHAPTER  
3
10Mb  
SELECT  
KEY  
The current  
angle number  
2Use ANGLE or CURSOR 2/3to select the  
3Use CURSOR 2/3or ANGLE to select the  
desired angle.  
desired angle number.  
Each time you press ANGLE or CURSOR 2/3, the  
angle changes.  
1 / 3  
2 / 3  
3 / 3  
Example:  
1 / 3  
2 / 3  
3 / 3  
Example:  
NOTES  
To turn off the on-screen display  
Press ON SCREEN.  
When  
appears on the TV screen  
The current scene is not recorded from multiple angles.  
40  
Advanced operations  
English  
To select a scene angle from the angle  
list display [ANGLE]  
Changing the language and  
sound  
For DVD VIDEO discs, you can select the subtitle language,  
as well as the audio language/sound included on a disc.  
For Video CD discs, you can select the audio channel(s).  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
9
To select the subtitle language  
[SUBTITLE]  
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
1
3
-
DIGEST  
ZOOM  
+
SELECT  
3
From normal screen  
3
2
+
CH  
5
TV  
DVD  
VOL  
-
VOL  
+
STANDBY/ON  
DISC  
SELECT  
ENTER  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
-
CH  
N
E
E
R
C
S
N
O
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
REMOTE CONTROL  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
During DVD VIDEO playback  
-
DIGEST  
ZOOM  
1, 2  
SELECT  
1Press and hold ANGLE for more than 1  
3
second.  
+
CH  
5
VOL  
-
VOL  
+
Up to nine camera  
angles recorded on  
a disc appear on the  
TV screen.  
ENTER  
-
CH  
N
E
E
R
C
S
N
O
3
REMOTE CONTROL  
During DVD VIDEO playback  
1Press SUBTITLE.  
The selected camera angle  
The Subtitle selection  
display appears on  
the TV screen.  
ON  
1 / 3  
ENGLISH  
2Use CURSOR 5//2/3to select the desired  
angle.  
3Press ENTER or 3.  
The unit starts playback by the selected angle on  
the full-sized screen.  
2To turn the subtitle on and off, press  
SUBTITLE.  
NOTES  
When  
appears on the TV screen in step 1:  
3To select the desired subtitle language, use  
The current scene is not recorded from multiple angles.  
CURSOR 2/3.  
During the operation above, audio is muted.  
Each time you press  
CURSOR 2/3, the  
Example:  
1/3 ENGLISH  
subtitle language  
changes.  
2/3 FRENCH  
3/3 SPANISH  
-/3 (off)  
41  
Advanced operations  
From on-screen display  
To change the audio language or sound  
[AUDIO]  
TV  
DVD  
STANDBY/ON  
TV DVD  
DISC  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
By AUDIO selection, you can choose the audio language of  
movies or enjoy KARAOKE with or without the vocal.  
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
From normal screen  
-
DIGEST  
ZOOM  
2, 3  
3
SELECT  
TV  
DVD  
3
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
+
CH  
2
1
TV1  
TV2  
TV3  
5
VOL  
-
VOL  
+
1
2
3
TV4  
TV5  
TV6  
ENTER  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
-
CH  
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
ZOOM  
-
DIGEST  
+
REMOTE CONTROL  
1, 2  
SELECT  
3
During DVD VIDEO playback  
+
CH  
5
VOL  
-
VOL  
+
1Press ON SCREEN.  
ENTER  
The on-screen display appears on the TV screen.  
-
CH  
N
E
E
R
C
S
N
O
2
2Use CURSOR 5/or SUBTITLE to move  
REMOTE CONTROL  
to [SUBTITLE].  
During playback  
Total number  
1Press AUDIO.  
1 / 3  
ANGLE  
2 / 3  
AUDIO  
The Audio selection display appears on the TV  
screen.  
SUBTITLTE  
1 / 3  
REPEAT  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
TIME  
3
1 : 34 : 58  
CHAPTER  
3
10Mb  
1 / 3  
ENGLISH  
SELECT  
KEY ENGLISH  
Selected subtitle  
number  
Selected subtitle  
3Use CURSOR 2/3or SUBTITLE to select the  
2Use AUDIO or CURSOR 2/3to select the  
desired subtitle.  
desired audio.  
Each time you press CURSOR 2/3or SUBTITLE,  
the subtitle changes.  
From on-screen display  
NOTES  
For DVD VIDEO, the selected language may be abbreviated  
on the TV screen. See Appendix A: Table of languages and  
their abbreviationsat the end of this manual.  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
The Subtitle selection display will automatically  
disappear if you do not change the subtitle for several  
seconds.  
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
2, 3  
PROGRESSIVE  
SCAN  
+
To turn off the Subtitle selection display manually, press  
ENTER.  
-
DIGEST  
ZOOM  
SELECT  
To turn off the on-screen display:  
3
Press ON SCREEN.  
2
1
+
CH  
5
When  
appears on the TV screen:  
VOL  
-
VOL  
+
ENTER  
You cannot select the subtitle.  
-
CH  
N
E
E
R
C
S
N
O
3
REMOTE CONTROL  
During playback  
1Press ON SCREEN.  
The on-screen display appears on the TV screen.  
42  
Advanced operations  
2Use CURSOR 5/or AUDIO to move  
to  
English  
[AUDIO].  
Miscellaneous functions  
(for DVD VIDEO)  
(for Video CD)  
To adjust the picture character [VFP]  
1 / 3  
2 / 3  
1 / 3  
ANGLE  
ST  
AUDIO  
AUDIO  
SUBTITLTE  
REPEAT  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PBC CALL  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
St.  
0
End  
TRACK  
3
TITLE  
TIME  
3
1 : 34 : 58  
CHAPTER  
3
10Mb  
TIME 34 : 58  
EXECUTE  
10Mb  
The VFP (Video Fine Processor) function enables you to  
adjust the picture character according to the type of  
programming, picture tone or personal preferences.  
PRESS ENTER  
SELECT  
KEY ENGLISH  
3Use CURSOR 2/3or AUDIO for audio  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
selection.  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
Each time you press CURSOR 2/3or AUDIO, the  
audio changes.  
See the following examples for audio selection.  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
1
-
DIGEST  
ZOOM  
For DVD VIDEO  
Each time you press CURSOR 2/3or AUDIO, the  
SELECT  
3
audio language or sound changes.  
2
+
CH  
Total number  
Example:  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
1 / 3  
ANGLE  
N
1/3 ENGLISH  
O
2 / 3  
3
AUDIO  
SUBTITLTE  
1 / 3  
REMOTE CONTROL  
REPEAT  
2/3 FRENCH  
3/3 SPANISH  
A-B REPEAT  
TIME SEARCH  
CHAP.SEARCH  
St.  
0
End  
TITLE  
TIME  
3
1 : 34 : 58  
CHAP.  
3
10Mb  
SELECT  
KEY ENGLISH  
During playback  
Selected audio number  
Selected audio language  
1Press VFP - PROGRESSIVE SCAN to select the  
desired preset.  
Each time you press the button, the preset changes  
as follows:  
For Video CD  
Each time you press CURSOR 2/3or AUDIO, the  
playback audio changes as follows.  
Selected preset  
NORMAL  
CINEMA  
ST  
AUDIO  
ST (stereo)  
NORMAL  
CINEMA  
USER1 USER2  
H
CONTRAST  
L
USER 1  
USER 2  
REPEAT  
L
A-B REPEAT  
St.  
0
End  
TRACK  
3
10Mb  
TIME 34 : 58  
TIME SEARCH  
PBC CALL  
SELECT  
KEY  
Level  
Parameter  
R
NORMALand CINEMAare factory presets and  
you cannot change parameters for them.  
While selecting USER 1or USER 2, you can  
adjust parameters that affect the picture character  
and store the settings as the user preset. See the  
step below.  
NOTES  
For DVD VIDEO, the selected language may be abbreviated  
on the TV screen. See Appendix A: Table of languages and  
their abbreviationsat the end of this manual.  
The Audio selection display will automatically  
disappear if you do not change the audio for several  
seconds.  
2To define a user setting, select a parameter to  
be edited using CURSOR 5/from the  
followings.  
To turn off the Audio selection display manually, press  
ENTER.  
To turn off the on-screen display:  
Press ON SCREEN.  
BRIGHTNESS  
When  
appears on the TV screen (for a DVD VIDEO  
Controls the brightness of the screen.  
disc):  
You cannot select the audio.  
CONTRAST  
Controls the contrast of the screen.  
COLOR  
Controls the color depth of the screen.  
43  
Advanced operations  
TINT  
2Select the desired mode by using 3D PHONIC.  
Controls the tint of the screen.  
Each time you press the 3D PHONIC button, the 3D  
PHONIC mode changes as follows:  
SHARPNESS  
Controls the sharpness of the screen.  
ACTION  
Y DELAY  
DRAMA  
Controls the color gap of the screen.  
3D PHONIC  
THEATER  
L
H
GAMMA  
THEATER  
OFF  
Controls the brightness of neutral tints with  
maintaining the brightness of dark and bright  
portions.  
Selected effect mode  
ACTION  
3Adjust the level of the parameter using  
Suitable for action movies and sports programs in  
which sounds dynamically move.  
CURSOR 2/3.  
Moving the adjusting bar to the left reduces the  
effect, while moving the bar to the right enhances  
the effect.  
DRAMA  
Natural and warm sound. You can enjoy movies in a  
relaxed mood.  
NOTE  
THEATER  
The number of setting steps depends on parameters.  
You can enjoy sound effects like in a major theater in  
Hollywood.  
3Press CURSOR 2/3to adjust the effect level.  
The VFP screen disappears if no operations are made for  
more than 10 seconds. You can also turn off the VFP screen  
manually by pressing ENTER.  
You can adjust the effect level in 5 steps.  
To simulate surround sound  
[3D PHONIC]  
3D PHONIC  
THEATER  
L
H
Using the 3D PHONIC function, you can get a simulated  
surround effect from your stereo system.  
Effect level  
Toward L: Reduces the effect.  
TV  
DVD  
STANDBY/ON  
DISC  
Toward H: Enhances the effect.  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1, 2  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
To turn off the 3D PHONIC screen, press ENTER. The 3D  
PHONIC screen disappears if no operations are made for  
more than 10 seconds.  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
SELECT  
NOTES  
3
The 3D PHONIC function works correctly only when  
playing back a DVD VIDEO disc recorded with the Dolby  
Digital. With other sources, you cannot get any effect if  
you press the 3D PHONIC button.  
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
N
O
3
When playing back a DVD VIDEO disc recorded with the  
Dolby Digital that does not contain the rear signal, you  
cannot get a correct 3D PHONIC sound though you can  
change the 3D PHONIC setting.  
REMOTE CONTROL  
During playback  
The 3D PHONIC function does not affect the Dolby  
Digital bitstream signal from the DIGITAL output jack.  
1Press 3D PHONIC.  
When you set the 3D PHONIC function is active, the  
DOWN MIXand COMPRESSIONsetting in the  
PREFERENCE 2display are disabled.  
The 3D PHONIC display appears on the TV screen.  
44  
Advanced operations  
While stopped  
English  
To check the disc time [TIME SELECT]  
EACH REMAIN  
(recording time of the current track)  
You can choose the time display mode for an Audio CD  
or Video CD disc in the display on the front panel and in  
the on-screen display.  
TOTAL (0:00)  
TOTAL REMAIN  
(total time of the disc)  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
EACH (0:00)  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
SELECT  
When you select EACH REMAINwhile stopped, you can  
3
change the track by pressing 4or ¢.  
+
CH  
5
VOL  
-
VOL  
+
2
ENTER  
3
1
Changing the brightness of the display  
window  
-
CH  
REMOTE CONTROL  
You can dim the brightness of the display window.  
For Audio CD: During playback or while stopped  
For Video CD: While stopped  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
1Press ON SCREEN.  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
The on-screen display appears on the TV screen.  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
2Use CURSOR 5/to move  
to [TIME  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
SELECT].  
1
-
DIGEST  
ZOOM  
SELECT  
(for Audio CD)  
(for Video CD)  
3
MIN  
SEC  
EACH  
MIN  
SEC  
EACH  
TRACK  
8
TIME 0 : 58  
TRACK  
1
TIME 3 : 54  
REMAIN  
TIME SELECT  
TIME SELECT  
+
CH  
5
VOL  
-
VOL  
+
1
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
REPEAT  
A-B REPEAT  
TIME SEARCH  
PROGRAM  
RANDOM  
ENTER  
1
9
2
3
4
5
6
7
8
1
9
2
3
4
5
6
7
8
-
CH  
10 11 12 13 14 15 16  
10 11 12 13 14 15 16  
17 18 19 20 21 22 23 24  
17 18 19 20 21 22 23 24  
REMOTE CONTROL  
Time display  
Time display  
When no disc is inserted  
1Press CURSOR 5or while holding down  
3Press ENTER.  
ANGLE.  
Each time you press ENTER, the time mode  
changes as follows:  
You can select the brightness of the display  
window from among three levels.  
During playback (for Audio CD)  
EACH  
(current track elapsed time)  
EACH REMAIN  
(current track remaining time)  
TOTAL  
(disc elapsed time)  
TOTAL REMAIN  
(disc remaining time)  
45  
MP3 disc playback  
This unit can playback CD-R discs recorded by the MP3  
format (we refer to those discs as MP3 discs in this  
manual).  
Though available functions with MP3 discs are limited,  
operations for the available functions are similar to those  
Operations  
Basic operations  
with Audio CD discs.  
TV  
DVD  
What is MP3?  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
MP3 is the abbreviation of MPEG1 Audio Layer 3.  
MPEG Audio is a compression specification that  
compresses the audio portion only. This image  
compression method is used in DVD or Video CD, etc.  
The audio data has been compressed into about 1/10.  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
ZOOM  
-
DIGEST  
+
Basic  
SELECT  
3
control  
buttons  
About MP3 disc  
+
CH  
5
VOL  
-
VOL  
+
ENTER  
On an MP3 disc, each material (song) is recorded on a  
Track (file). Tracks are usually grouped into a Group”  
(folder) by category, by artist, etc. In addition, Groups  
can also be members of Groups (Groups' Group),  
creating hierarchical Group layers. If you are familiar  
with personal computers, you may easily understand the  
hierarchical Group layer construction of MP3 discs  
because it is similar to the folder layer construction of  
computers.  
This unit can handle up to 100 Tracks per Group, up to  
100 Groups per Group layer and up to 10 Group layers. If  
a disc has more Tracks, Groups or Group layers than the  
above, the unit does not recognize those exceeding the  
-
CH  
N
E
E
R
C
S
N
O
REMOTE CONTROL  
The following table shows basic functions of basic  
control buttons.  
Buttons  
Functions  
Starts playback  
ENTER  
Stops playback completely  
Pauses playback temporarily  
7
maximum numbers and cannot playback them.  
Group 1  
Group 1’  
Group 2  
8
Skips back or forward a Track in the  
Group*  
up to 10 Group  
layers  
4/¢  
Track 1  
* You cannot skip a Track across a Group.  
up to 100 Tracks  
per Group  
NOTES  
NOTES for making a private MP3 disc  
using a CD-R disc:  
The current Track number is shown on the display  
window in the following manner.  
Select ISO 9660as the disc format.  
Do not select the multi-sessionrecording.  
Finalize the disc after completing recording.  
LPCM  
-
VCDVD  
TITLE TRACK CHAP  
1
A B  
MDOPELBGY 38  
PROGRAM  
DIGITAL  
DTS  
RANDOM  
Current track elapsed time  
Current track number  
NOTES  
The unit does not support packet writediscs.  
Only MP3 files are shown on the display window as a  
track.  
Some disc may not be played back because of the disc  
characteristics or recording condition.  
Group number is not shown in the display window.  
The unit does not output a digital audio signal from  
DIGITAL OUT when playing back an MP3 disc.  
You cannot advance or reverse playback of an MP3 disc  
rapidly.  
You cannot playback Tracks in the desired  
(programmed) or random order.  
You cannot see any other time information but the  
current track elapsed time.  
The screen saver function is not active with an MP3  
disc, as with an Audio CD.  
The unit only can play back Tracks with any of the  
following file extensions; .MP3, .Mp3, .mp3and  
.mP3.  
46  
MP3 disc playback  
English  
English  
English  
4Press ENTER.  
Specifying the desired Group  
and Track  
The unit starts playback from the specified Track.  
During playback, the bottom row of the display  
shows something like below.  
When loading an MP3 disc, after the disc contents are  
read, the MP3 CONTROL display automatically appears  
on the TV screen. You can specify the desired Group and  
7UD%Nꢀꢊꢄꢊꢇꢀꢀꢀꢀꢃꢊ ꢆ ꢇꢈ ꢆ ꢉꢅ  
Track for playback via this display.  
Track time  
The number of tracks in theꢀ  
M P 3 C O N T R O L  
current group  
G R O U P :  
/
Current track number  
NOTES  
You can specify the desired Group/Track from the display  
by the following procedure.  
If a MP3 file name includes any 2-byte character, the unit  
may not show the file name correctly.  
You can select (highlight) a track which does not belong  
to any Group (if there is any). In this case, pressing  
ENTER immediately starts playback.  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
Pressing the CURSOR 2button returns to the higher  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
hierarchical layer of Groups.  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
Only MP3 files are shown on the MP3 CONTROL display.  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
The order of Groups/Tracks shown in the MP3  
CONTROL display may differ from the order shown on  
your personal computer when you set the disc on your  
computer.  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
SELECT  
3
+
CH  
5
VOL  
-
VOL  
+
1, 3  
ENTER  
2, 4  
-
CH  
N
E
E
R
C
S
N
O
REMOTE CONTROL  
When the MP3 selection display is shown while  
stopped  
1Highlight a desired Group using CURSOR  
5/.  
2Press ENTER.  
The highlighted Group is selected, and contents of  
the Group is shown.  
If tracks in the selected Group are shown, go to  
the next step.  
If there are one or more Groups in the selected  
Group, repeat steps 1 and 2 until tracks in the  
selected Group are shown.  
3Highlight a desired Track using CURSOR  
5/.  
M P 3 C O N T R O L  
G R O U P : U B 4 0  
/
0 1 - O n e I n T e n . m p 3  
0 2 - R e d R e d W i n e . m p 3  
0 3 - K i n g s t o n T o w n . m p 3  
0 4 - H i g h e r G r o u n d . m p 3  
0 5 - K i n g . m p 3  
0 6 - C h e r t y o h B a b y . m p 3  
0 7 -  
I
G o t Yo u B a b e . m p 3  
Selected Group  
SelectedTrack  
47  
MP3 disc playback  
Repeat playback  
You can repeat playback of the current track or group.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
1
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
SELECT  
3
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
REMOTE CONTROL  
During playback or while stopped  
1Press REPEAT.  
Each time you press REPEAT, the repeat mode  
toggles among current group repeat, current track  
repeat and off.  
You can see the selected mode by icons in the  
display window on the front panel as below.  
:
Repeats the current group on the  
disc.  
1
:
Repeats the current track.  
No indication: The repeat mode is off.  
To stop repeat playback  
Press 7.  
To quit repeat playback  
Press REPEAT as many times until no repeat icon is  
shown on the display window.  
NOTE  
You cannot repeat all contents on the disc.  
48  
Initial settings  
English  
NOTES  
To returns the normal screen:  
Selecting preferences  
Press CHOICE.  
You can set various preferences for playback via two  
preference displays.  
If you bring up a PREFERENCE display during DVD  
VIDEO/Video CD playback, the unit memorizes the  
current playback position, and resumes playback from  
that position later when dismissing the PREFERENCE  
display.  
How to set preferences  
You can bring up a preference display at any time except  
the unit is turned off.  
Language and display preference  
TV  
DVD  
STANDBY/ON  
DISC  
TV  
DVD  
SELECT  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
The PREFERENCE 1display handles preferences  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
related to language and display.  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
9
TV-/--  
10  
MUTING  
+
10  
MENU LANGUAGE  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
You can select the default displaylanguage to be  
displayed if it is contained on a DVD VIDEO disc.  
SELECT  
3
Each time you press  
2
, 4  
1
+
CH  
5
PREFERENCE1  
PREFERENCE2  
VOL  
-
VOL  
+
CURSOR 3, the language  
setting changes in the  
following order:  
ENTER  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
-
CH  
N
E
E
R
C
S
N
O
ENGLISH  
ON SCREEN LANGUAGE  
3
ON  
4:3 LB  
AUTO  
ON SCREEN GUIDE  
MONITOR TYPE  
PROGRESSIVE MODE  
REMOTE CONTROL  
PRESS  
KEY  
Selected language  
In any condition except the unit is turned off.  
ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language code  
from AA to ZU  
(See Appendix A: Table of languages and their  
abbreviationsat the end of this manual.)  
1Press CHOICE.  
One of the Preference on-screen displays appears  
on the TV monitor.  
You can see two tabs for the displays  
(PREFERENCE 1 and PREFERENCE 2) at the top.  
Pressing CURSOR 2changes the language setting in the  
reverse order of the above.  
2Select the appropriate tab using CURSOR  
2/3when  
points either one of the tabs.  
* If the selected language is not recorded, the discs  
PREFERENCE 2  
PREFERENCE 1  
default display language will be displayed.  
PREFERENCE1  
PREFERENCE2  
PREFERENCE1  
PREFERENCE2  
ENGLISH  
ENGLISH  
OFF  
STREAM/PCM  
Lo / Ro  
ON  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ON SCREEN LANGUAGE  
ON SCREEN GUIDE  
MONITOR TYPE  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
AUDIO LANGUAGE  
You can select the default audio language to be played if  
it is contained on a DVD VIDEO disc.  
OFF  
ENGLISH  
ON  
MODE 1  
DVD1  
4:3 LB  
AUTO  
PROGRESSIVE MODE  
PRESS  
KEY  
PRESS  
KEY  
Each time you press  
PREFERENCE1  
PREFERENCE2  
CURSOR 3, the language  
setting changes in the  
following order:  
3Move  
to select the item you want to edit by  
using CURSOR 5/ꢃ  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ON SCREEN LANGUAGE  
ON  
4:3 LB  
AUTO  
ON SCREEN GUIDE  
MONITOR TYPE  
PROGRESSIVE MODE  
PREFERENCE1  
PREFERENCE2  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
PRESS  
KEY  
ENGLISH  
ON SCREEN LANGUAGE  
ON  
4:3 LB  
AUTO  
Selected language  
ON SCREEN GUIDE  
MONITOR TYPE  
PROGRESSIVE MODE  
PRESS  
KEY  
ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language code  
from AA to ZU  
Selected item  
(See Appendix A: Table of languages and their  
abbreviationsat the end of this manual.)  
4Press CURSOR 2/3to select from options.  
For details about each setting, see the following  
paragraphs:  
Pressing CURSOR 2changes the language setting in the  
reverse order of the above.  
* If the selected language is not recorded, the discs  
default audio language will be played.  
49  
Initial settings  
Examples of on-screen guideicons or characters:  
SUBTITLE  
You can select the default subtitle language to be  
displayed if it is contained on a DVD VIDEO disc.  
,
,
ON  
Each time you press  
The on-screen guide will be displayed.  
PREFERENCE1  
PREFERENCE2  
CURSOR 3, the language  
setting changes in the  
following order:  
ENGLISH  
ENGLISH  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
OFF  
ENGLISH  
ON SCREEN LANGUAGE  
The on-screen guide will not be displayed.  
ON  
4:3 LB  
AUTO  
ON SCREEN GUIDE  
MONITOR TYPE  
PROGRESSIVE MODE  
PRESS  
KEY  
MONITOR TYPE  
You can select the monitor  
type to match your TV  
Selected language  
PREFERENCE1  
PREFERENCE2  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
OFF ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language code  
from AA to ZU  
when you playback DVD  
VIDEO discs recorded for  
wide screen televisions.  
ENGLISH  
ON  
ON SCREEN LANGUAGE  
ON SCREEN GUIDE  
MONITOR TYPE  
4:3 LB  
AUTO  
PROGRESSIVE MODE  
(See Appendix A: Table of languages and their  
abbreviationsat the end of this manual.)  
PRESS  
KEY  
Pressing CURSOR 2changes the language setting in the  
reverse order of the above.  
4:3 LB.  
(Letter Box Conversion)  
Should be selected when you  
connect a normal TV to the  
unit.  
When you play a wide picture  
recorded on a DVD VIDEO disc,  
the picture is displayed with  
bands across the upper and  
lower portions of the screen.  
* If the selected language is not recorded, the discs  
default subtitle language will be displayed.  
ON SCREEN LANGUAGE  
You can select the on-screen display language of the  
unit.  
4:3 PS.  
(Pan Scan Conversion)  
Each time you press  
CURSOR 3, the language  
setting changes as follows:  
Should be selected when you  
connect a normal TV to the  
unit.  
When you play a wide picture  
recorded on a DVD VIDEO  
disc, a portion of the picture is  
automatically cut off from the  
left and right sides of the image.  
PREFERENCE1  
PREFERENCE2  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ON SCREEN LANGUAGE  
ON  
4:3 LB  
AUTO  
ON SCREEN GUIDE  
MONITOR TYPE  
PROGRESSIVE MODE  
PRESS  
KEY  
Selected language  
Depending on the disc, it may not be possible to  
playback in this mode. In that case, the picture is  
played back as in 4:3 LB.  
mode.  
16:9 AUTO (Wide Television screen)  
Should be selected  
when you connect a  
wide-screen TV to the  
unit.  
English  
French  
ON SCREEN LANGUAGE  
ENGLISH  
FRANCAIS  
16:9 NORMAL (Wide Television screen)  
Spanish  
IDIOMA EN PANTALLA  
Should be selected when you connect the unit to a  
wide-screen TV whose aspect ratio is fixed to 16:9 (the  
unit automatically adjusts the screen width of the  
output signal correctly when playing back a 4:3”  
Pressing CURSOR 2changes the language setting in the  
reverse order of the above.  
source).  
ON SCREEN GUIDE  
The unit can display on-  
NOTES  
PREFERENCE1  
PREFERENCE2  
screen guideicons or  
characters on the picture,  
which show what is  
happening to the disc or the  
unit.  
If a disc does not support 4:3 Pan Scan, the letter box  
screen appears even if you set the MONITOR TYPE to  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
4:3 PS.  
.  
ENGLISH  
ON  
ON SCREEN LANGUAGE  
ON SCREEN GUIDE  
MONITOR TYPE  
4:3 LB  
AUTO  
If you playback a 4:3DVD VIDEO source with the  
16:9 NORMALmode, the picture character slightly  
changes due to the process for converting the picture  
width.  
PROGRESSIVE MODE  
PRESS  
KEY  
50  
Initial settings  
STREAM/PCM  
PROGRESSIVE MODE  
You can select the  
progressive mode from the  
following options.  
English  
Should be selected when you connect with the digital  
input of an amplifier with a built-in DTS, Dolby Digital,  
or MPEG multichannel decoder.  
PREFERENCE1  
PREFERENCE2  
ENGLISH  
ENGLISH  
OFF  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ON  
ON SCREEN LANGUAGE  
ON SCREEN GUIDE  
MONITOR TYPE  
DOLBY DIGITAL/PCM  
4:3 LB  
AUTO  
PROGRESSIVE MODE  
Should be selected when you connect to the digital  
input of a Dolby Digital decoder, or an amplifier with a  
built-in Dolby Digital decoder.  
PRESS  
KEY  
AUTO  
The unit recognizes the picture type (film or video  
source) of the current disc according to the disc  
information.  
The following chart shows the relationship between  
types of playback discs and output signals.  
VIDEO 1  
Output  
Suitable for playing back a video source disc with  
static (inactive) pictures.  
DOLBY  
DIGITAL/  
PCM  
Playback discs  
STREAM/  
PCM  
PCM ONLY  
VIDEO 2  
Suitable for playing back a video source disc with  
dynamic (active) pictures.  
DVD with 48/44.1 48/44.1 kHz,  
kHz, 16 bit linear 16 bit, stereo  
+
+
PCM  
linear PCM  
FILM  
DVD with 48/44.1 48/44.1 kHz,  
Suitable for playing back a film or progressive source  
disc.  
kHz, 20/24 bit  
linear PCM  
16 bit, stereo  
linear PCM*  
+
+
+
+
+
DVD with 96/88.2 No output  
kHz, linear PCM  
SMART  
Used to playback a disc containing both video and  
film source materials.  
DVD with DTS  
DTS bitstream 48 kHz, 16 bit,  
stereo linear  
PCM*  
* Normally, set the PROGRESSIVE MODE to AUTO.  
* Some DVD VIDEO discs may not be played back  
correctly with the AUTOmode. If the playback  
picture is unclear or noisy with a particular DVD  
DVD with Dolby  
Digital  
Dolby Digital  
bitstream  
48 kHz, 16 bit,  
stereo linear  
PCM*  
+
+
Video CD  
Audio CD  
44.1 kHz,  
16 bit, stereo  
linear PCM  
VIDEO disc, try to change the mode.  
+
44.1 kHz,16  
bit,  
stereo linear  
PCM  
NOTE  
When playing back a film-source DVD VIDEO disc with  
the PROGRESSIVE MODEset to FILM, SMARTor  
AUTOand the progressive scan mode is active, the  
PROGRESSIVE indicator on the front panel lights in  
green. (See page 17.)  
+
+
Audio CD with DTS DTS bitstream 44.1 kHz,  
16 bit, stereo  
+
+
linear PCM  
CD -R with MP3  
No output  
+
Audio and system preference  
* With some DVD VIDEO discs that are not fully copy-  
protected, a 20 or 24 bit digital signal may be output.  
The PREFERENCE 2display handles preferences  
related to audio and system.  
NOTES  
DIGITAL AUDIO OUTPUT  
The unit does not provide the DTS decoding function.  
To connect the units digital  
When playing a DVD VIDEO or Audio CD disc with DTS,  
use a DTS decoder to get correct signals from your  
speakers.  
PREFERENCE1  
PREFERENCE2  
output to an external device  
equipped with a digital  
input, this item must be set  
correctly.  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
ON  
OFF  
MODE 1  
DVD 1  
PRESS  
KEY  
PCM ONLY  
Should be selected when you connect the DIGITAL  
OUT jack of the unit to the linear PCM digital input of  
other audio equipment.  
51  
Initial settings  
DOWN MIX  
To playback a DVD VIDEO  
disc recorded with  
surround multichannel  
audio correctly, the DOWN  
MIX setting must be  
SCREEN SAVER  
A television monitor screen may be burned out if a static  
picture is displayed for a long time. To prevent this, the  
unit automatically activates the screen saver function if a  
static picture, such as an on-screen display or menu, is  
displayed for over 5 minutes.  
PREFERENCE1  
PREFERENCE2  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
ON  
OFF  
MODE 1  
DVD1  
PRESS  
KEY  
properly made according to  
your audio system.  
MODE 1  
PREFERENCE1  
PREFERENCE2  
The current picture gets  
dark.  
Note that this setting affects  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
only the output signal from the ANALOG AUDIO output  
jacks when playing back a DVD VIDEO disc recorded with  
surround multichannel audio.  
ON  
OFF  
MODE 1  
DVD1  
MODE 2  
The screen saverpicture  
appears and its brightness  
changes.  
PRESS  
KEY  
Lt/Rt  
Should be selected when you enjoy multichannel  
surround audio by connecting the units ANALOG  
AUDIO output to a surround decoder.  
OFF  
The screen saver function is off.  
L0/R0  
Should be selected when you enjoy conventional 2-  
channel stereo audio by connecting the units AUDIO  
output to a stereo amplifier/receiver or television set,  
or when you duplicate audio of a DVD VIDEO disc  
recorded with surround audio to your MD, cassette,  
etc.  
NOTE  
The monitor screen of a projector or projection TV is  
easily burned out if the screen saver mode is set to OFF  
and a static picture is displayed for a long time.  
When a static picture is displayed for a long time  
during playback, the screen saver function is always  
activated in MODE 1regardless of whether you select  
MODE 1or MODE 2.  
NOTE  
The Down mix function does not work when the 3D  
PHONIC function is activated.  
AV COMPULINK MODE  
If you use the AV COMPU  
LINK system, you must set  
this item correctly.  
Select from the three options:  
DVD1, DVD2and DVD3”  
according to the equipment to  
be connected.  
PREFERENCE1  
PREFERENCE2  
COMPRESSION  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
The compression function  
suppresses the dynamic  
range of 2-channel audio  
output signals. This function  
is always active when  
playing back a 5.1-channel  
source.  
ON  
OFF  
PREFERENCE1  
PREFERENCE2  
MODE 1  
DVD1  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
ON  
PRESS  
KEY  
OFF  
MODE 1  
DVD 1  
See page 56.  
PRESS  
KEY  
ON  
The compression function is always active regardless  
of sources.  
OFF  
The compression function is inactive when playing  
back a one- or two-channel source.  
AUTO STANDBY  
When the unit is stopped for  
more than 30 minutes or 60  
minutes, the unit enters  
PREFERENCE1  
PREFERENCE2  
STREAM/PCM  
Lo/Ro  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
COMPRESSION  
AUTO STANDBY  
SCREEN SAVER  
AV COMPULINK MODE  
ON  
OFF  
standby mode automatically.  
MODE 1  
DVD1  
PRESS  
KEY  
60  
Time is set to 60 minutes.  
30  
Time is set to 30 minutes.  
OFF  
The auto standby function is off.  
52  
Initial settings  
4While  
points [Set Level], use CURSOR  
English  
2/3to select the Parental Lock level.  
Limiting playback by  
children  
PARENTAL LOCK  
US  
Country Code  
Set Level  
LEVEL 1  
– – – –  
This function restricts playback of DVD VIDEO discs  
which contain violent (and other) scenes according to the  
level set by the user. For example, if a movie which  
includes violent scenes supports the parental lock  
feature, such scenes which you do not want to let  
children view can be cut or replaced with other scenes.  
PASSWORD  
EXIT  
PRESS  
KEY  
ENTER  
Each time you press CURSOR 2/3, the Parental  
level changes as follows:  
NONE  
To set Parental Lock for the first time  
[PARENTAL LOCK]  
LEVEL 1  
LEVEL 8  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
• “LEVEL1is the strictest level. NONEmeans no  
restriction. Discs rated higher than the selected level are  
restricted.  
4
TV7  
7
5
TV8  
8
TV0  
0
6
TV9  
6
9
TV-/--  
10  
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
SELECT  
5Press ENTER.  
3
1
moves to [PASSWORD].  
+
CH  
1, 3, 5, 7  
2, 4  
5
VOL  
-
VOL  
+
ENTER  
6Enter your 4-digit password using the numeric  
-
CH  
buttons (0 to 9).  
REMOTE CONTROL  
PARENTAL LOCK  
US  
Country Code  
Set Level  
LEVEL 1  
– – – –  
While a DVD VIDEO disc is stopped or no disc is inserted  
PASSWORD  
EXIT  
1Press ENTER while holding down 7on the  
remote control unit.  
NEW PASSWORD? • • • PRESS 0~9 KEY  
The Parental Lock on-screen display appears on the  
TV screen.  
7Press ENTER.  
The Parental level and password are set.  
moves to [EXIT].  
points [Country Code].  
Pressing ENTER again returns to the opening  
display.  
2While  
points [Country Code], use  
CURSOR 2/3to select the USfor country  
code.  
The country code whose standards were applied to  
rate the DVD VIDEO disc should be selected.  
See Appendix B: Country code list for Parental  
Locks.  
If you enter an undesired password in step 6 above, reenter  
the password before pressing ENTER.  
PARENTAL LOCK  
US  
Country Code  
Set Level  
NONE  
– – – –  
PASSWORD  
EXIT  
PRESS  
KEY  
ENTER  
3Press ENTER.  
moves to [Set Level].  
53  
Initial settings  
5Enter the password using the numeric buttons  
(0 to 9) and press ENTER.  
To change the settings  
[PARENTAL LOCK]  
moves to [EXIT].  
The password entered in the above step becomes  
the new password. If you do not change the  
password, enter the same password as in the step 2.  
Even if you want to change only the country code  
and/or parental level, do not forget to enter the  
password after changing the country code and/or  
parental level. Otherwise, the new country code  
and/or parental level will not become effective.  
Pressing ENTER again returns to the opening display.  
You can change the Parental Lock settings later.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
2-1, 5-1  
9
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
+
-
DIGEST  
ZOOM  
NOTES  
SELECT  
3
1, 2-2, 3-2,  
4-2, 5-2  
When you enter the wrong password more than 3 times  
in step 2 above,  
CURSOR 5/does not work.  
If you forget your password in step 2  
Enter 8888.”  
1
moves to [EXIT] automatically and  
+
CH  
5
VOL  
-
VOL  
+
ENTER  
-
CH  
N
E
E
R
C
S
N
O
3-1, 4-1  
REMOTE CONTROL  
While a DVD VIDEO disc is stopped or no disc is inserted  
1Press ENTER while holding down 7on the  
remote control unit.  
The Parental Lock on-  
screen display appears  
on the TV screen.  
points [PASSWORD].  
PARENTAL LOCK  
US  
Country Code  
Set Level  
LEVEL 1  
– – – –  
PASSWORD  
EXIT  
CURRENT PASSWORD? • • • PRESS 0~9 KEY  
2Enter your current 4-digit password using the  
numeric buttons (0 to 9) and press ENTER.  
moves to [Country Code] if you enter the correct  
password.  
If you enter the wrong password, WRONG!  
RETRY...appears on the TV screen, and you  
cannot go to the next step.  
3To change the country code, use CURSOR  
2/3to select the desired country code and  
press ENTER.  
moves to [Set Level].  
When you change the country code, you must  
select the parental level.  
4To change the set level, use CURSOR 2/3to  
select the desired level while  
Level], and then press ENTER.  
moves to [PASSWORD].  
points [Set  
54  
Initial settings  
English  
To temporarily release the Parental  
Lock [PARENTAL LOCK]  
When you set the Parental level strictly, some discs may  
not be played back at all. When you insert such a disc  
and try to play it, the following Parental Lock on-screen  
display appears on the TV screen, asking you whether  
you want the Parental Lock to be temporarily released or  
not.  
TV  
DVD  
STANDBY/ON  
DISC  
SELECT  
TV  
DVD  
3D  
TV/VIDEO  
REPEAT PHONIC CANCEL RETURN  
TV1  
TV2  
TV3  
1
2
3
TV4  
TV5  
TV6  
4
TV7  
7
5
TV8  
8
6
TV9  
9
2
TV-/--  
10  
TV0  
0
MUTING  
+
10  
ANGLE SUBTITLE AUDIO  
VFP  
PROGRESSIVE  
SCAN  
-
DIGEST  
ZOOM  
+
SELECT  
3
+
CH  
1-2  
5
VOL  
-
VOL  
+
1-1  
ENTER  
-
CH  
REMOTE CONTROL  
1Use the CURSOR 5/to move  
then press ENTER.  
moves to the  
to [YES],  
[PASSWORD].  
When selecting [NO],  
press 0(OPEN/CLOSE)  
button on the front  
panel to remove the  
disc.  
PARENTAL LOCK  
This DISC cant play now!  
Temporary  
Level Change ?  
YES  
NO  
– – – –  
PASSWORD  
PRESS ENTER  
EXECUTE  
2Enter your 4-digit password using the numeric  
buttons (0 to 9).  
The Parental Lock is released, and the unit starts  
playback.  
If you enter the wrong password, WRONG!  
RETRY...appears on the TV screen.  
Enter the correct password.  
NOTE  
When you enter the wrong password more than 3 times  
in step 2 above,  
moves to [NO] automatically and  
CURSOR 5/do not work.  
55  
Additional information  
AV COMPU LINK remote control system  
The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest  
operation.  
If your video/audio player (such as a DVD player, CD player and VCR) and television or/and  
amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV  
COMPU LINK cable(s), when you simply starting the player, all the necessary settings of  
the television and/or amplifier/receiver for enjoying playback are automatically performed.  
NOTE  
The cable for connecting between the AV COMPU LINK jacks is not supplied with the unit. Purchase an optional audio cable  
with monaural mini-plugs on both ends for AV COMPU LINK connection.  
Connection and setup  
Using the AV COMPU LINK cable, connect the AV COMPU LINK terminals of each component to one another.  
To AV COMPU LINK (II or EX)  
TV  
DVD player  
If you connect a DVD player to a television via AV COMPU LINK, set the DVD players AV COMPU LINK setting as  
follows.  
When connecting to VIDEO-1 input terminal of the television: DVD2  
When connecting to VIDEO-2 input terminal of the television: DVD3  
To AV COMPU LINK (II or EX)  
To AV COMPU LINK  
TV  
DVD player  
VCR (Video Cassette Recorder)  
If you connect a DVD player to a television and VCR via AV COMPU LINK, set the VCRs Remote Control Code and DVD  
players AV COMPU LINK setting as follows.  
When connecting to VIDEO-1 input terminal of the television:  
DVD players AV COMPU LINK setting: DVD2  
VCRs Remote Control Code: B  
When connecting to VIDEO-2 input terminal of the television:  
DVD players AV COMPU LINK setting: DVD3  
VCRs Remote Control Code: A  
To AV COMPU LINK (II or EX)  
TV  
Receiver  
DVD player  
If you connect a DVD player to a television and receiver via AV COMPU LINK, set the DVD players AV COMPU LINK  
setting to DVD1.  
The DVD players AV COMPU LINK setting is operated in the PREFERENCE 2 display.  
See page 52 for operation.  
For information on the connection between the TV and the Receiver, refer to the Receivers Instructions.  
56  
Additional information  
English  
IMPORTANT!  
You connect the component video output to your TV:  
Set the DVD players AV COMPU LINK setting to DVD1.  
Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do  
not make the S-VIDEO connection.  
Notes for connection  
If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions  
may not be performed automatically.  
The AV COMPU LINK terminal on some televisions indicates II.Do not connect the terminal indicating IIwith the AV  
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.  
Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating DVD.Otherwise, the  
system will not work correctly.  
There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a  
television or VCR with AV COMPU LINK terminals indicating IIor EXcan be connected to a DVD player.  
Operation  
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound  
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to  
perform power switching.  
1Turn on the main power of the television.  
2Insert a disc (or tape) into the source component.  
3Press 3of the source component.  
The following actions are performed automatically:  
Turning on the power for the television.  
Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).  
Turning on the power for the receiver.  
Setting the source of the receiver to the component which has started playback.  
57  
Additional information  
Care and handling of discs  
How to handle discs  
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a  
disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may  
cause the player to malfunction.  
Label side  
Do not damage the label side, stick paper to or use any adhesive on its surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they  
can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the  
humidity or temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards.  
If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any  
anti-static agents.  
CAUTION  
Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to  
industry standards.)  
These symptoms are caused by the discs, not by the malfunction of the unit.  
58  
Additional information  
English  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before requesting  
service.  
Symptom  
Possible case  
Remedy  
Power does not come on.  
Power plug is not inserted securely.  
Plug in securely.  
Too far from the unit.  
More closer to the unit.  
The tip of the remote unit is not pointed in  
the right direction.  
Point the infrared light- emitting window  
toward the remote sensor on the front panel.  
Remote control does not work.  
Batteries are exhausted.  
Replace the batteries with new ones.  
Take out the batteries and insert them again in  
the correct direction.  
Battery polarity is incorrect.  
To control the unit, set the TV - DVD switch to  
DVD. To control your TV, set the TV - DVD  
switch to TV.  
The TV/VIDEO - CANCEL, CURSOR or  
numeric buttons do not work.  
The TV - DVD switch is not correctly set.  
Connection of video cable is incorrect.  
Input selection of TV is incorrect.  
Disc is not playable.  
Connect the cable correctly.  
Select correctly.  
No picture is displayed on the  
monitor.  
Use a playable disc. (See page 15.)  
The Progressive scan mode is set to ON  
though the unit is connected to a TV via  
the VIDEO OUT jack.  
Set the Progressive scan mode to OFF. (See  
page 17.)  
The unit is connected to a VCR directly  
and the copyguard function is activated.  
Connect the unit so that the picture signal  
flows directly to the TV.  
Picture is noisy or blurred.  
No audio is reproduced.  
With some discs, a picture may be blurred  
when setting the PROGRESSIVE MODE”  
to FILMor AUTO.  
Set the PROGRESSIVE MODEto VIDEO.  
Connection is incorrect.  
Check the connections.  
Select correctly.  
Input selection of amplifier is incorrect.  
No audio is reproduced when playing  
back a DVD disc recorded with 88.2  
kHz or more, linear PCM audio using  
the DIGITAL OUT jack.  
The audio signal is not derived from the  
unit's DIGITAL OUT.  
Use the AUDIO OUT when playing back such  
discs.  
Sound is distorted or noise is  
generated.  
Disc is dirty.  
Wipe the disc surface.  
MONITOR TYPE is not correctly set.  
Television is not correctly set.  
Select monitor type correctly. (See page 50.)  
Set the television correctly.  
Picture does not fit the television  
screen.  
Microcomputer malfunction due to  
lightning or static electricity.  
Turn off the power and unplug the power  
cord, then connect the power cord again.  
Operation is not possible.  
Moisture condensation caused by a  
sudden change of temperature or  
humidity.  
Turn off the power, then turn it on a few hours  
later.  
The system malfunctions.  
An alien substance is jammed on the  
carousel.  
The carousel does not move.  
Press the STOP button or turn off the power.  
59  
Additional information  
Specifications  
General  
Readable discs:  
Video format:  
DVD VIDEO, Audio CD, Video CD  
NTSC, 525i/525p selectable  
Other  
Power requirements:  
Power consumption:  
Mass:  
AC 120 V  
, 60 Hz  
18 W (POWER ON), 2.7 W (STANDBY mode)  
5.6 kg (12.4 lbs)  
Dimensions (W x H x D):  
435 mm x 102 mm x 448 mm  
(17-3/16 inch x 4-1/16 inch x 17-11/16 inch)  
Video outputs  
COMPONENT (pin jacks):  
Y Output:  
1.0 Vp-p (75 )  
PB/PR Output:  
1.0 Vp-p (75 )  
Y Output:  
C Output:  
500 Lines or more  
0.7 Vp-p (75 )  
VIDEO OUT (pin jack):  
S-VIDEO OUT (S jack):  
1.0 Vp-p (75 )  
286 mVp-p (75 )  
Horizontal resolution:  
Audio outputs  
ANALOG OUT (pin jack):  
DIGITAL OUT: (COAXIAL):  
(OPTICAL):  
2.0 Vrms (10 k)  
0.5 Vp-p (75 termination)  
21 dBm to 15 dBm (Peak)  
Audio characteristics  
Frequency response:  
CD  
DVD (sampling frequency 48 kHz):  
(2 Hz to 20 kHz for DTS and Dolby Digital bitstream signals)  
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz  
2 Hz to 22 kHz  
DVD (sampling frequency 96 kHz):  
16 bit: More than 98 dB  
2 Hz to 44 kHz  
Dynamic range:  
20 bit: More than 106 dB  
24 bit: More than 106 dB  
Unmeasurable (less than 0.002%)  
less than 0.002%  
Wow and flutter:  
Total harmonic distortion:  
* Specifications and appearance subject to change without prior notice.  
60  
Additional information  
English  
Appendix A:Table of languages and their abbreviations  
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations. To select  
the desired language, select the abbreviation corresponding the language you want to.  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
Afar  
IK  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Inupiak  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
SK  
SL  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Kirghiz  
Latin  
Lingala  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay (MAY)  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
OM  
OR  
PA  
Telugu  
Tajik  
Thai  
EO  
ET  
EU  
FA  
FI  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Twi  
Ukrainian  
Urdu  
Uzbek  
Hindi  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Zulu  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
PL  
PS  
PT  
QU  
RM  
IE  
61  
Additional information  
Appendix B:Country code list for Parental Locks  
This list is used for the Parental Lock operation. For details, see page 53.  
ES Spain  
ET Ethiopia  
LB Lebanon  
LC Saint Lucia  
SA Saudi Arabia  
SB Solomon Islands  
SC Seychelles  
SD Sudan  
SE Sweden  
SG Singapore  
SH Saint Helena  
AD Andorra  
AE United Arab Emirates  
AF Afghanistan  
FI  
FJ  
Finland  
Fiji  
LI  
Liechtenstein  
AG Antigua and Barbuda  
LK Sri Lanka  
LR Liberia  
LS Lesotho  
FK Falkland Islands  
AI  
Anguilla  
Micronesia  
AL Albania  
AM Armenia  
FM  
(Federated States of)  
FO Faroe Islands  
FR France  
LT  
Lithuania  
SI  
Slovenia  
AN Netherlands Antilles  
AO Angola  
AQ Antarctica  
AR Argentina  
AS American Samoa  
AT Austria  
LU Luxembourg  
LV Latvia  
LY Libyan Arab  
MA Morocco  
Svalbard and Jan  
Mayen  
SJ  
FX France, Metropolitan  
GA Gabon  
GB United Kingdom  
GD Grenada  
GE Georgia  
GF French Guiana  
GH Ghana  
SK Slovakia  
SL Sierra Leone  
SM San Marino  
SN Senegal  
SO Somalia  
SR Suriname  
ST Sao Tome and Principe  
SV El Salvador  
SY Syrian Arab Republic  
SZ Swaziland  
MC Monaco  
MD Moldova, Republic of  
MG Madagascar  
MH Marshall Islands  
ML Mali  
MM Myanmar  
MN Mongolia  
MO Macau  
AU Australia  
AW Aruba  
AZ Azerbaijan  
BA Bosnia and  
BB Barbados  
BD Bangladesh  
BE Belgium  
BF Burkina Faso  
BG Bulgaria  
BH Bahrain  
GI  
Gibraltar  
GL Greenland  
GM Gambia  
GN Guinea  
GP Guadeloupe  
GQ Equatorial Guinea  
GR Greece  
Turks and Caicos  
Islands  
TC  
Northern Mariana  
Islands  
MP  
TD Chad  
MQ Martinique  
MR Mauritania  
MS Montserrat  
MT Malta  
MU Mauritius  
MV Maldives  
MW Malawi  
French Southern  
Territories  
TF  
South Georgia and the  
BI  
Burundi  
GS  
South Sandwich  
GT Guatemala  
GU Guam  
BJ Benin  
TG Togo  
TH Thailand  
BM Bermuda  
BN Brunei Darussalam  
BO Bolivia  
BR Brazil  
BS Bahamas  
BT Bhutan  
BV Bouvet Island  
BW Botswana  
BY Belarus  
BZ Belize  
CA Canada  
TJ  
Tajikistan  
GW Guinea-Bissau  
GY Guyana  
HK Hong Kong  
TK Tokelau  
TM Turkmenistan  
TN Tunisia  
TO Tonga  
TP East Timor  
TR Turkey  
TT Trinidad and Tobago  
TV Tuvalu  
TW Taiwan  
MX Mexico  
Heard Island and  
MY Malaysia  
MZ Mozambique  
NA Namibia  
NC New Caledonia  
NE Niger  
HM  
McDonald Islands  
HN Honduras  
HR Croatia  
HT Haiti  
HU Hungary  
NF Norfolk Island  
NG Nigeria  
ID  
IE  
IL  
Indonesia  
Ireland  
Israel  
Tanzania, United  
TZ  
CC Cocos (Keeling) Islands  
NI  
Nicaragua  
Republic of  
UA Ukraine  
UG Uganda  
Central African  
Republic  
CG Congo  
CF  
NL Netherlands  
NO Norway  
NP Nepal  
NR Nauru  
NU Niue  
NZ New Zealand  
OM Oman  
PA Panama  
PE Peru  
PF French Polynesia  
PG Papua New Guinea  
PH Philippines  
PK Pakistan  
PL Poland  
IN  
India  
British Indian Ocean  
Territory  
United States Minor  
CH Switzerland  
IO  
UM  
Outlying Islands  
US United States  
UY Uruguay  
CI  
Cô te dIvoire  
IQ  
IR  
Iraq  
CK Cook Islands  
CL Chile  
CM Cameroon  
CN China  
CO Colombia  
CR Costa Rica  
CU Cuba  
CV Cape Verde  
CX Christmas Island  
CY Cyprus  
CZ Czech Republic  
DE Germany  
DJ Djibouti  
DK Denmark  
DM Dominica  
DO Dominican Republic  
DZ Algeria  
Iran (Islamic Republic  
of)  
UZ Uzbekistan  
IS  
IT  
Iceland  
Italy  
Vatican City State  
(Holy See)  
VA  
Saint Vincent and the  
Grenadines  
JM Jamaica  
JO Jordan  
JP Japan  
KE Kenya  
KG Kyrgyzstan  
KH Cambodia  
VC  
VE Venezuela  
VG Virgin Islands (British)  
VI  
Virgin Islands (U.S.)  
VN Vietnam  
VU Vanuatu  
Saint Pierre and  
Miquelon  
PN Pitcairn  
PM  
KI  
Kiribati  
Wallis and Futuna  
Islands  
WF  
KM Comoros  
KN Saint Kitts and Nevis  
PR Puerto Rico  
PT Portugal  
PW Palau  
PY Paraguay  
QA Qatar  
RE Réunion  
RO Romania  
RU Russian Federation  
RW Rwanda  
WS Samoa  
YE Yemen  
Korea, Democratic  
KP  
Peoples Republic of  
KR Korea, Republic of  
KW Kuwait  
YT Mayotte  
YU Yugoslavia  
ZA South Africa  
ZM Zambia  
ZR Zaire  
EC Ecuador  
EE Estonia  
EG Egypt  
EH Western Sahara  
ER Eritrea  
KY Cayman Islands  
KZ Kazakhstan  
Lao Peoples  
Democratic Republic  
ZW Zimbabwe  
LA  
62  
Authorized Service Centers  
®
QUALITY  
SERVICE  
HOW TO LOCATE YOUR JVC SERVICE CENTER  
TOLL FREE: 1 (800) 537-5722  
Dear Customer,  
In order to receive the most satisfaction from your purchase,please read the instruction booklet before  
operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest  
authorized servicer or visit our website at www.JVC.com  
Remember to retain your Bill of Sale for Warranty Service.  
Do not service the television yourself  
Caution  
To prevent electrical shock,do not open the cabinet.There are no user serviceable  
parts inside.Please refer to qualified service personnel for repairs.  
Accessories  
To purchase accessories for your JVC product,please call toll free:1 (800)882-2345 or  
on the web at www.JVC.com  
BT-51005-5  
(0301)  
LIMITED WARRANTY  
CONSUMER VIDEO 1-90  
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE  
ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date  
of original retail purchase for the period as shown below. ("The Warranty Period")  
PARTS  
LABOR  
1 YR  
90 DAYS  
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND  
IN COMMONWEALTH OF PUERTO RICO.  
WHAT WE WILL DO:  
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner.  
Such repair and replacement services shall be rendered by JVC during normal business hours at JVC authorized service  
centers. Parts used for replacement are warranted only for the remainder of the Warranty Period. All products and parts  
thereof may be brought to a JVC authorized service center on a carry-in basis except for Television sets having a screen  
size 25 inches and above which are covered on an in-home basis.  
WHAT YOU MUST DO FOR WARRANTY SERVICE:  
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized  
service center, please call toll free: (800) 537-5722.  
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with  
a copy of your bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the  
name and location of which will be given to you by the toll-free number.  
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.  
WHAT IS NOT COVERED:  
This limited warranty provided by JVC does not cover:  
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty  
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by  
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model number  
or serial number has been altered, tampered with, defaced or removed;  
2. Initial installation and installation and removal for repair;  
3. Operational adjustments covered in the Owner's Manual, normal maintenance, video and audio head cleaning;  
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;  
5. Signal reception problems and failures due to line power surge;  
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;  
7. Accessories;  
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);  
There are no express warranties except as listed above.  
THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS  
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.  
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER  
DAMAGES, WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE  
TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH  
OF THIS WARRANTY. ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANT-  
ABILITY AND FITNESS FOR PARTICULAR PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.  
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an  
implied warranty lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific  
legal rights and you may also have other rights which vary from state to state.  
JVC COMPANY OF AMERICA  
DIVISION OF JVC AMERICAS CORP.  
1700 Valley Road  
Wayne, NJ 07470  
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF  
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION  
PACKAGED WITH EACH REFURBISHED PRODUCT.  
For customer use:  
Enter below the Model No. which is located either on the rear, bottom or side of the cabinet. Retain this information  
for future reference.  
Model No. :  
Serial No. :  
Purchase data :  
Name of dealer :  
VICTOR COMPANY OF JAPAN, LIMITED  
J
V
C
0701NHMDTEJEM  
EN.  

IBM DTLA 305020 User Manual
Jenn Air JGD8130ADB User Manual
JVC AV32T20EP User Manual
JVC DT V9L3DY User Manual
LG Electronics W2053TQ User Manual
Lindy 51185 User Manual
Peavey EUROSYS 10PM User Manual
Philips 107X User Manual
Philips 170p5 User Manual
Philips HNS7170T User Manual