JVC VIDEO NAVIGATOR GV DV1000 User Manual

BEFORE OPERATION  
AVANT DE COMMENCER  
ANTES DE LA OPERACION  
GV-DV1000  
DV Capture Board  
Video Navigator  
PhotoSuite SE  
VideoWorks  
LYT0272-001A  
EN  
3
5. LIMITED WARRANTY  
JVC warrants that any media in which the Program is embodied (e.g. floppy discs, CD-ROM,  
etc.) are free from any defects in materials and workmanship for a period of thirty (30) days  
from the date of your purchase and that any hardware accompanying the Program is also free  
from defects to the extent provided in the attached Warranty Form. JVC’s entire liability and  
your exclusive remedy in conneciotn with the Program shall be, at JVC’s option, either (a)  
return of the price paid, or (b) replacement of defective Program media.  
6. DISCLAIMER OF WARRANTIES  
EXCEPT FOR THE EXPRESS WARRANTIES STATED HEREIN AND TO THE EXTENT PER-  
MITTED BY APPLICABLE LAW, JVC AND ITS SUPPLIERS DISCLAIM ANY OTHER WAR-  
RANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN  
REGARD TO THE PROGRAM AND THE ACCOMPANYING PRINTED MATERIALS.  
7. LIMITED LIABILITY  
TO THE EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL JVC AND ITS  
SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN-  
TIAL DAMAGES WHATSOEVER, REGARDLESS OF THE FORM OF ACTION WHETHER IN  
CONTRACT, TORT, STRICT PRODUCT LIABILITY OR OTHERWISE (INCLUDING BUT NOT  
LIMITED TO DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, LOSS OF  
BUSINESS INFORMATION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF OR IN  
CONNECTION WITH THE USE OF OR INABILITY TO USE THE PROGRAM, EVEN IF JVC  
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
Victor Company of Japan, Limited  
CONTENTS  
4
EN  
JVC SOFTWARE LICENSE AGREEMENT  
2
TECHNICAL SUPPORT FOR REGISTERED USER  
5
User Registration Method......................................................... 5  
NOTICE FOR USERS  
7
INSTALLING DV CAPTURE BOARD  
8
INSTALLING DV CAPTURE DRIVERS  
10  
For WINDOWS® 98............................................................... 10  
For WINDOWS® 95 VERSION 4.00.950B or later ........................ 12  
For WINDOWS® 95 VERSION 4.00.950 or 4.00.950A .................. 14  
CONNECTING AND TROUBLESHOOTING  
16  
Connecting DV Device ............................................................ 16  
Troubleshooting for DV Capture Board ....................................... 17  
For WINDOWS® 98 (p. 10~11) ............................................... 17  
For WINDOWS® 95 (p. 12~15) ............................................... 17  
INSTALLING VIDEO NAVIGATOR  
18  
Preparation ......................................................................... 18  
Installing Video Navigator ...................................................... 18  
STARTING UP VIDEO NAVIGATOR  
19  
Preparation ......................................................................... 19  
FINISHING VIDEO NAVIGATOR  
INSTALLING PHOTOSUITE SE  
19  
20  
Installing PHOTOSUITE SE....................................................... 20  
INSTALLING VIDEOWORKS 21  
Installing VIDEOWORKS......................................................... 21  
INSTALLING ACROBAT READER 22  
Installing ACROBAT READER ................................................... 22  
STARTING UP AND FINISHING 23  
Starting up VIDEOWORKS ...................................................... 23  
Finishing VIDEOWORKS ......................................................... 23  
IMPORTING IMAGES INTO VIDEOWORKS  
24  
Preparation ......................................................................... 24  
TECHNICAL SUPPORT FOR REGISTERED USER  
TECHNICAL SUPPORT FOR REGISTERED USER  
EN  
5
To enable the technical support of each company, perform the user registration according the  
below table.  
User Registration Method  
Product Name  
Support company  
Registration Method  
Remarks  
Video Navigator  
JVC  
Not required.  
See JVC Software  
License Agreement.  
(p. 2)  
Adaptec  
DV Capture Board  
MGI  
Mail the MGI  
software user  
registration post  
card.  
See Adaptec  
Software License  
Agreement. (attached  
sheet)  
For repair of the  
board see Repair of  
Adaptec DV Capture  
Board in below.  
Adaptec Driver  
(program)  
MGI  
NewSoft  
MGI  
Mail the MGI  
software user  
registration post  
card.  
See MGI Software  
Corp, Software  
License Agreement.  
(attached sheet)  
VideoWorks  
Not required.  
See MGI Software  
Corp, Software  
License Agreement.  
(attached sheet)  
MGI PhotoSuite SE  
Mail the MGI  
software user  
registration post  
card.  
See MGI Software  
Corp, Software  
License Agreement.  
(attached sheet)  
• Repairs for the Adaptec DV capture board:  
Please consult the MGI support center for  
repairs of the Adaptec DV capture board.  
2)All damages caused through the accident,  
misuse, wear and tear and neglect.  
3)Error on use by connecting this product  
with other devices.  
4)Damages caused by fire, moisture, natural  
disasters or incorrect voltage.  
Subject to the conditions stated hereby,  
MGI Software Corp. guarantees for this  
equipment only against defects in work-  
manship for the period of 5 years from the  
date of purchase. No charge will be made  
during this period for labor or for replace-  
ment parts for the Adaptec DV capture  
board. You have to represent the receipt  
proving the purchase of this product  
including the dealer’s name and address  
with your claim.  
Technical Support  
Please inform the technical support of each  
corporation in the next page of your question  
for each product. Please acknowledge  
beforehand that it may require longer time  
for some questions.  
This guarantee excludes:  
1)Alternations or adjustments made to the  
equipment.  
TECHNICAL SUPPORT FOR REGISTERED USER (cont.)  
6
EN  
JVC Support for:  
NewSoft Support for:  
Phone:  
1-800-252-5722 (only in U.S.A)  
North America(U.S.A)  
Technical Support Hotline:  
Please e-mail: [email protected] or  
call (510) 445-8616  
Europe  
Adaptec and MGI Support for:  
North America (Canada)  
Address: MGI Software Corp.  
40 West Wilmot Street  
Richmond Hill, Ontario  
L48 1H8  
UK  
The Software Centre  
East Way  
Canada  
Phone: 1-905-764-7291  
East Mill Industrial Estate  
Ivybridge  
Devon, PL21 9PE  
United Kingdom  
Europe (Holland)  
Phone: +31-20-430-3026  
Tel:  
(44) 1752-201148  
(44) 1752-894833  
Fax:  
+31-20-430-3024  
Fax:  
Asia/Pacific (Australia)  
Address: Support Group Services  
Ground Floor  
France  
Info Trade Centre  
dactivités de lOurcq 45  
rue Delizy 93692  
Pantin  
14 Spink Street  
Gardenvale Vic 3186  
ATTN:  
MGI Technical Support Australia  
France  
Phone: 61-3-9929-9735  
Tel:  
(33) 1-4810-7550  
(33) 1-4810-7555  
Fax:  
61-3-9399-9523  
Fax:  
Asia/Pacific (Taiwan, R.O.C.)  
9F, NO68  
Sec. 3, Nankig E. Rd.  
Taipei  
Taiwan, R.O.C.  
Tel:  
Fax:  
(886) 2-2517-0750  
(886) 2-2517-0760  
JVC cannot answer questions regarding basic operation of your PC, or questions  
regarding specifications or performance of the products for Adaptec, MGI and Newsoft.  
NOTICE FOR USERS  
When contacting the technical support centers (p. 6) about this software, please fill out the  
following and have the appropriate information ready.  
EN  
7
Name of Software  
Product  
Version of Software  
Model  
CPU  
PC  
OS  
Memory  
MB  
MB  
Available Hard Disk Space  
Please note that it may take some time to respond to your questions, depending on their  
subject matter.  
INSTALLING DV CAPTURE BOARD  
To install the DV Capture Board (AHA-8920 IEEE Host Adapter) in your computer so you can  
connect IEEE 1394 devices to your system, follow these steps:  
8
EN  
Discharge any static electricity build-up  
1
before handing the DV Capture Board  
by touching a grounded metal object  
(like the exposed metal parts on the back  
of your computer).  
Turn OFF the power of the computer and  
disconnect the power cord.  
2
Remove the cover from the computer.  
(Refer to your computers manual.)  
3
Locate an unused PCI expansion slot  
4
(typically white or ivory) and remove the  
expansion slot cover. Save the slot cover  
screw for use In Step 6.  
EN  
9
Remove the DV Capture Board from its  
antistatic packaging. Always handle the  
card by its edges.  
5
6
IEEE 1394 DV Capture Board  
Carefully insert the DV Capture Board  
into the PCI expansion slot until it is  
firmly seated, then replace the slot cover  
screw.  
Replace your computer cover. The  
driver program (IEEE 1394 software) for  
the DV Capture Board must be installed  
on your computer before you can use  
the JVC Video Navigator.  
7
Caution  
Computers may have vertical or horizontal PCI expansion slots. Refer to your computer  
manual to locate the PCI expansion slots.  
Do not place the DV Capture Board in an area where there is static electricity, such as on a  
carpet. Static electricity could damage the parts on the board.  
Do not touch the metal terminals with your bare hand.  
Do not give the board a strong shock because precise electronic parts are mounted on the  
board.  
Refer to the computers instruction book before removing the board from your computer.  
The board or your computer may be damaged if the board is removed incorrectly.  
Do not spill water on the board.  
INSTALLING DV CAPTURE DRIVERS  
10  
EN  
Caution  
In case the DV Capture Board has been installed with Windows® 95, these steps are not  
required.  
FOR WINDOWS® 98  
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you  
have not done so already, install the DV Capture Board (see p. 8). Follow these steps to install  
the drivers. If you make a mistake during the install procedure, click the Back button and  
correct the mistake.  
Turn on your computer. Put the included  
1
JVC CD-ROM in your CD-ROM drive.  
The New Hardware Found Window is  
displayed.  
If the New Hardware Found Window is  
not displayed click the Start button on  
the Task Bar and select Shut Down. In  
the Shut Down Windows window select  
Restart the computer and click OK.  
The Add New Hardware Wizard is  
2
displayed.  
Click the Next button.  
Make sure Search for the best driver for  
3
your device. (Recommended). is  
selected. Then click the Next button.  
EN  
11  
Make sure only the CD-ROM drive is  
4
5
6
7
selected. Then click the Next button.  
Make sure The updated driver  
(Recommended) Adaptec AHA- 8920  
Host Adapter is selected. Then click the  
Next button.  
Click the Next button.  
Click the Finish button.  
Restart your computer.  
8
INSTALLING DV CAPTURE DRIVERS (cont.)  
12  
EN  
Before installing, confirm your Windows® 95 version. Double-click the system icon in the  
Control Panel and select General tab.  
FOR WINDOWS® 95VERSION 4.00.950B OR LATER  
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you  
have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install  
the drivers:  
Turn on your computer. Put the included  
1
JVC CD-ROM in your CD-ROM drive.  
The New Hardware Found Window is  
displayed.  
The Next Hardware Found window is  
displayed.  
The Update Device Driver Wizard is  
displayed. Click the Next button.  
2
Click the Finish button.  
3
EN  
13  
The Insert Disk window is displayed.  
4
5
Click the OK button.  
If you know the drive letter for your CD-  
ROM drive enter it in the box below  
Copy files from: and go to step 7. If you  
do not know the drive letter for your  
CD-ROM drive continue with the next  
step.  
In the Open window click the arrow  
below Drives: and select your CD-ROM  
drive. Click wn1394.inf in the file list.  
Then click the OK button.  
6
In the Copying Files... window click the  
7
8
OK button.  
Restart your computer.  
INSTALLING DV CAPTURE DRIVERS (cont.)  
14  
EN  
FOR WINDOWS® 95VERSION 4.00.950 OR 4.00.950A  
Before you use the DVC Capture Board, you must install the DV Capture Board drivers. If you  
have not done so already, install the DV Capture Board (See p. 8). Follow these steps to install  
the drivers:  
Turn on your computer. Put the included  
1
JVC CD-ROM in your CD-ROM drive.  
The New Hardware Found Window is  
displayed.  
The New Hardware Found Window is  
displayed.  
In the New Hardware Found Window  
2
select Driver from disk Provided by  
hardware manufacturer. Then click the  
OK button.  
If you know the drive letter for your CD-  
3
ROM drive enter it in the box below  
Copy manufacturer’s files from: and go  
to step 5. If you do not know the driver  
letter for your CD-ROM drive continue  
with the next step.  
EN  
15  
In the Open window click the arrow  
below Drives: and select your CD-ROM  
drive. Click wn1394.inf in the file list.  
Then click the OK button.  
4
In the Install From Disk window click  
5
6
the OK botton.  
After the installation is complete we  
recommend you restart your computer.  
CONNECTING AND TROUBLESHOOTING  
CONNECTING DV DEVICE  
16  
EN  
Plug the included DV cables larger  
1
connector into the socket on the DV  
Capture Board.  
Confirm that the connector is securely  
plugged in.  
Plug the DV cables smaller connector  
2
into the camcorders DV OUT/IN socket.  
Confirm that the connector is securely  
plugged in.  
DV IN/OUT  
Refer to your camcorderss instruction  
book to locate the camcorders DV  
OUT/IN socket.  
EN  
17  
TROUBLESHOOTING FOR DV CAPTURE BOARD  
If you are experiencing problems when using DV Capture Board, check the following items:  
The DV Capture Drivers are not installed.  
The PCI expansion slot must be a 5V bus master PCI expansion slot. Refer to your computers  
manual and seat the DV Capture Board in the PCI expansion slot firmly.  
FOR WINDOWS® 98 (P. 10~11)  
If the drivers did not install properly then use the following procedure:  
1. Double-click the System icon in the Control Panel.  
2. Select Device Manager tab.  
3. Click the + to the left of the 1394 Bus Controller icon.  
4. Click the Adaptec AHA-8920 Host Adapter icon to select it.  
Then click the Remove button.  
5. Click OK button.  
6. Restart your computer.  
7. Install the DV Capture Driver again. (See p.10-11)  
MEMO  
About Windows® 98 basic operation, refer to the instruction book of Windows® 98 or your  
computer.  
FOR WINDOWS® 95 (P. 12~15)  
If the drivers did not install properly then use the following procedure:  
1. Double-click the System icon in the Control Panel.  
2. Select Device Manager tab.  
3. Click the + to the left of the 1394 Bus Controller icon.  
4. Double-click the Adaptec AHA-8920 Host Adapter icon, or the PCI FireWire (IEEE 1394)  
icon.  
5. Click Driver tab in the properties window.  
6. Click Change Driver button.  
7. Follow the prompts on the display.  
INSTALLING VIDEO NAVIGATOR  
18  
EN  
DirectX  
About Windows® 95 basic operation, refer to the instructions of Windows® 95 or your compu-  
ter.  
PREPARATION  
Start Windows.  
1
2
3
Close all open windows and toolbars. Close any icons shown on the task bar.  
Confirm that programs are not displayed on the task bar.  
INSTALLING VIDEO NAVIGATOR  
Insert the included CD-ROM into the  
CD-ROM drive.  
1
Click Start menu and select Run.  
2
3
Click Browse button in the Run window.  
In Browse window, select the Setup.exe  
icon in VideoNavigtor folder in the CD-  
ROM drive and then OK button.  
Confirm \VideoNavigator\Setup.exe is  
4
shown in the Run window.  
Then click the OK button.  
The install program for Video Naviga-  
tor will start. Follow the prompts on  
the display.  
STARTING UP VIDEO NAVIGATOR  
PREPARATION  
EN  
19  
Insert your video cassette to your DV  
device.  
1
Connect the DV cable to your computer  
2
and your digital camcorder. (See the  
separate booklet of DV Video Navigator,  
p. 8)  
Set your digital camcorder to Play mode.  
3
4
Turn on your computer and start up  
Windows® 95.  
Click Start on the task bar.  
5
6
Select Program and VideoNavigator 1.0  
and click VideoNavigator 1.0.  
Then Video Navigator will start up.  
MEMO  
Close all open windows and toolbars. Close any icons shown on the task bar.  
Turn off the function that starts up software automatically by time control. For example,  
screen saver, E-mail, communication software, viruses checker, scheduler and etc.  
Disable sharing for all shared resources, for example shared folders or shared printers.  
Caution  
Do not remove the DV device and turn off the power of DV device while Video Navigator  
is running.  
FINISHING VIDEO NAVIGATOR  
At Index window, click File menu and  
1
Exit.  
Or click the closing button.  
Video Navigator will finish.  
Turn off the power of DV device.  
2
INSTALLING PHOTOSUITE SE  
20  
EN  
Using MGI PhotoSuite Starter Edition (SE), you can transform or enhance the pictures you take  
by altering colors, making collages, and more. Put your photos into posters, calendars and  
greeting cards. Youll see your photos in a whole new light. Put your photos into a picture  
frame or a screen saver, or into a school science report, or wherever youd like them to be.  
Surprise yourself, impress your friends, and create your own exciting new photo collection!  
INSTALLING PHOTOSUITE SE  
Insert the included CD-ROM into the  
CD-ROM drive.  
1
Click Start menu and select Run.  
2
Click Browse button in the Run window.  
3
4
In Browse window, select the CD-ROM  
icon in Look in: Column. In the list  
column, double-click PhotoSuite folder  
and Setup icon.  
Confirm \PhotoSuite\Setup.exe is shown  
5
in the Run window. Then click the OK  
button.  
The install program for PhotoSuite will  
start. Follow the prompts on the  
display.  
INSTALLING VIDEOWORKS  
EN  
21  
Presto! VideoWorks enables you to manage and edit in detail on your computer screen video  
sequences as well as sounds (AVI files), or video/audio fragments captured from video devices  
such as a VCR, a laser disc player, a Camcorder, etc. You can combine several video se-  
quences with significant order, create smooth transition effects, add various video effects, and  
render moving titles to compose a creation of art.  
INSTALLING VIDEOWORKS  
Insert the included CD-ROM into the  
1
CD-ROM drive.  
Click Start menu and select Run.  
2
Click Browse button in the Run window.  
3
4
In Browse window, select the CD-ROM  
icon in Look in: Column. In the list  
column, double-click VideoWorks folder  
and Setup icon.  
Confirm\VideoWorks\Setup.exe is  
5
shown in the Run window.  
Then click the OK button.  
The install program for VideoWorks  
will start. Follow the prompts on the  
display.  
Caution  
VideoWorks requires that the Windows Multimedia components are installed. Use the  
Add/Remove Programs icon in the Control Panel to install the Multimedia components.  
Check that Multimedia is selected in the Windows Setup tab.  
The installation of the Microsoft ActiveMovie or DirectX components may cause your  
computer to lockup. This occurs after the installation is complete when you are prompted  
to restart your computer. If your computer locks up after you choose to restart, press the  
CTRL+ALT+DEL keys to open the Close Program window. Select Microsoft ActiveMovie or  
DirectX Setup and click the End Task button.  
INSTALLING ACROBAT READER  
INSTALLING ACROBAT READER  
22  
EN  
The VideoWorks Manual File is supplied as acrobat data file. In case it cannot be opened, you  
should install Adobe Acrobat Reader.  
Insert the included CD-ROM into the  
CD-ROM drive.  
1
Click Start menu and select Run.  
2
Click Browse button in the Run window.  
3
In Browse window, select the CD-ROM  
4
icon in Look in: Column. In the list  
column, double-click AcrobatReader  
folder and Setup icon.  
Confirm \AcrobatReader\Setup.exe is  
5
shown in the Run window.  
Then click the OK button.  
The install program for Acrobat Reader  
will start. Follow the prompts on the  
display.  
STARTING UP AND FINISHING  
STARTING UP VIDEOWORKS  
EN  
23  
Click Start on the task bar.  
1
Select Program and Presto! VideoWorks  
2
and click Presto! VideoWorks.  
Then VideoWorks will start up.  
MEMO  
Close all open windows and toolbars. Close any icons shown on the task bar.  
Turn off the function that starts up software automatically by time control. For example for  
screen saver, E-mail, communication software, viruses checker, scheduler and etc.  
Disable sharing for all shared resources, for example shared folders or shared printers  
FINISHING VIDEOWORKS  
Click File menu and Exit.  
1
Or click the Exit button.  
For saving or other operation, refer to  
Presto! VideoWorks ManualFile  
produced as PDF file.  
VideoWorks will finish.  
IMPORTING IMAGES INTO VIDEOWORKS  
VideoWorks makes an action file from images captured by Video Navigator. The action movie  
can be adjusted to smooth action by morph function.You can view the action file as like a  
movie because the snapshots related with time are connected continuously and displayed with  
frame-playback.  
24  
EN  
PREPARATION  
You should save image files as JPEG or Bitmap format when saving them with Video Naviga-  
tor.  
Start up VideoWorks. (See p. 23)  
Caution  
For images importing to VideoWorks, you should save them with the default file name  
(jvn01.jpg). They are saved with the filnames having serial numbers from jvn01.jpg.  
To import them easily, you had better make a new folder or specify an existing folder when  
saving them with Video Navigator.  
The file names must contain serial number from 01.  
In the main window of VideoWorks,  
click File menu and Import.  
1
In Open window, select Image File in  
2
Files of type column. And click Option  
button.  
Check Stream button and Fit in with  
3
video dimensions button in Import  
Options Window.  
If necessary, check Morph button.  
See p. 25 MEMO.  
Click OK button.  
4
EN  
25  
Click one of the image files in Open  
5
6
window.  
Click Open button.  
The image files in same folder are  
imported and action movie is made  
with them.  
Media Viewer window is displayed.  
Processing time for importing depends  
on the settings of Import Options  
window. (See step 3.)  
Click the play button on the Media  
Viewer window.  
7
MEMO  
Video Album  
You can make video-album with images not continuing as travel snapshots. The images are  
switched at constant duration automatically as slide-show.  
Example: Displaying 10 images and 5 seconds each image.  
In Import Options window, input 1 (frame / sec) into Frame rate column and 50 (seconds)  
into Sec: column. (See step 3.)  
The memory size becomes minimum by inputing 1 into Frame rate column.  
Video duration is whole displaying duration. 10 (images) × 5 (seconds) = 50 (seconds)  
Animation for Internet  
In many cases, animation on Internet web is set to 160 × 120 for video dimensions and 15  
for frame rate. By using Video Navigator, you can capture and save the suitable images by  
setting preferences for Capture (interval: 2 frames) and preferences for Save Image (160 ×  
120).  
In detail, refer to INSTRUCTIONS book in same pack.  
For 99 images, you had better set Video duration in Import Options window to 6 seconds  
9 frames. (15 images is equal to 1 second.) If it is set to longer duration, the animation  
movie becomes slower.  
VICTOR COMPANY OF JAPAN, LIMITED  
0P9ri9n8teMdNinV*JaSpNan*SN  
U
COPYRIGHT© 1998 VICTOR COMPANY OF JAPAN, LTD.  

IBM Data Capture Board CLC CAPT PCASM User Manual
Intel Compact Board PCM 9452 User Manual
Intel Xeon E5 4600 User Manual
KitchenAid KECC506RBL02 User Manual
KitchenAid KGRT607HBS5 User Manual
Mitutoyo Crib Toy 99MBH001B1 Series No 179 User Manual
National Instruments HPC467064 User Manual
Philips 29pt5124 User Manual
Philips CD280 User Manual
Philips DVP4088 User Manual