JVC GGT0010 001A E User Manual

Contents  
Safety precautions  
Preparation  
2
2
3
3
4
5
6
7
COLOUR TELEVISION  
......  
1 Confirm which remote control you have  
INSTRUCTIONS  
...................................  
2 Inserting the batteries  
...  
3
Connecting the aerial and external devices  
Thank you for buying this JVC  
colour television.  
........................  
4 Connecting the power cord  
..............................................  
5 SETUP TOUR  
To make sure you understand how to  
use your new TV, please read this  
manual thoroughly before you begin.  
Basic operation  
Remote control buttons and functions 8  
.....................................  
ECO SENSOR button  
8
8
8
8
9
9
9
9
10  
10  
11  
11  
12  
12  
13  
13  
13  
14  
14  
14  
15  
16  
16  
16  
17  
18  
19  
.................................  
PICTURE MODE button  
COLOUR SYSTEM button  
SOUND SYSTEM button  
.............................  
...............................  
AV-16N211  
AV-21Y211  
.............................................  
.............................................  
DISPLAY button  
MUTING button  
.........................................  
OFF TIMER button  
PICTURE BOOSTER button  
...........................  
........................................  
RETURN + button  
..............................  
CHANNEL SCAN button  
Using the TV’s menus  
............................................  
...........................................................  
Basic operation  
INPUT  
.....................................................  
ON TIMER  
AUTO SHUTOFF  
..........................................  
.................................................  
..................................................  
CHILD LOCK  
BLUE BACK  
..........................................  
...............................................  
AI ECO DISPLAY  
SETUP TOUR  
.......................................  
AUTO CH PRESET  
MANUAL CH PRESET  
..................................  
..............................................................  
SKIP  
..................................................  
LANGUAGE  
Picture Adjustments  
....................................  
TV buttons and parts  
Using the buttons on the TV  
Troubleshooting  
Specifications  
Back cover  
GGT0010-001A-E  
0803-NIC-JMT  
© 2003 VICTOR COMPANY OF JAPAN, LIMITED  
Preparation  
1 Confirm which remote control you have  
Your TV comes with one of the two remote controls shown below. Functions you  
can operate differ depending on the type of remote control.  
RM-C375GY  
For TV model:  
AV-21Y211  
RM-C367GY  
For TV model:  
AV-16N211  
PICTURE  
ECO  
PICTURE  
BOOSTER  
POWER  
POWER  
BOOSTER  
SENSOR  
SYSTEM  
COLOUR SOUND  
SYSTEM  
COLOUR SOUND  
PICTURE  
MODE  
PICTURE  
MODE  
1
2
3
6
9
1
2
3
6
9
TV/VIDEO  
TV/VIDEO  
4
5
8
0
4
5
8
0
OFF  
TIMER  
OFF  
TIMER  
7
7
CHANNEL  
SCAN  
CHANNEL  
SCAN  
RETURN+  
RETURN+  
- --  
/
- --  
/
DISPLAY  
MUTING  
DISPLAY  
MUTING  
MENU  
MENU  
CHANNEL  
VOLUME  
CHANNEL  
VOLUME  
REMOTE CONTROL UNIT  
RM-C367GY  
RM-C375GY  
2 Inserting the batteries  
Correctly insert two batteries, observing the and  
,
.
polarities and inserting the end first.  
.
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
• Use AA/R6/UM-3 dry cell batteries.  
• If the remote control does not work properly, fit new  
batteries.  
The supplied batteries are for testing, not regular use.  
3
Preparation  
3 Connecting the aerial and external devices  
• For further details, refer to the manuals provided with the devices you are connecting.  
• Connecting cables are not supplied.  
• The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either  
jack is output through both. You cannot provide input to both the front and rear jacks at the  
same time. Disconnect one input, or use one of the jacks as an output jack only (for  
monitoring or recording).  
Connecting the aerial and VCR  
Connecting the aerial  
To install rod aerial:  
(1)  
Install into the top-rear aerial holder. Once installed, it cannot be removed.  
VHF/UHF outdoor aerial  
Indoor aerial  
Rod aerial  
Aerial holder  
(2)  
Matching aerial adapter  
(supplied)  
1
2
(3)  
VIDEO AUDIO  
IN  
VIDEO AUDIO  
IN  
OUT  
OUT  
• Illustration of AV-21Y211  
Connecting the aerial and VCR  
VHF/UHF outdoor aerial  
2
VIDEO AUDIO  
IN  
OUT  
3
To video  
output  
To audio  
output  
To RF  
output  
1
VCR  
• Illustration of AV-21Y211  
To aerial input  
4
Preparation  
Connecting other external devices  
To audio  
output  
To video  
output  
VIDEO AUDIO  
VCR (for playing)  
IN  
OUT  
VCR (for recording)  
To audio  
input  
To video  
input  
• Illustration of AV-21Y211  
To video  
output  
Camcorder  
or  
TV game  
To audio  
output  
MENU  
VIDEO  
AUDIO  
IN  
Headphones  
• Illustration of AV-21Y211  
• Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the  
headphones, the TV speakers go off.  
• Because the front AUDIO jacks are monaural, even stereo input becomes monaural.  
4 Connecting the power cord  
Connect the power cord to the AC outlet.  
Operate only from the power source indicated on the rear of the TV.  
5
Preparation  
5 SETUP TOUR  
When the TV is first turned on, it enters the SETUP TOUR mode, and the JVC logo is  
displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR.  
In case of resetting that the reason for such as removal, you can set the AUTO CH  
PRESET function on the “MENU 3” menu. For details, see page 14.  
1 Press the Main power button  
on the TV.  
The POWER lamp lights. After the  
JVC logo has been displayed, the TV  
ON TIMER POWER  
automatically switches to the  
language setting mode.  
POWER lamp Main power button  
CHANNEL  
SCAN  
RETURN+  
- --  
/
0
SETUP TOUR  
DISPLAY  
MUTING  
DISPLAY  
button  
MENU  
/
MENU  
MENU –/+  
buttons  
buttons  
2 Press the MENU M buttons to  
select the on-screen language.  
CHANNEL  
VOLUME  
SETUP TOUR  
LANGUAGE  
ENGLISH  
NEXT  
EXIT BY  
OPERATE BY -+  
DISPLAY  
3 Press the MENU y button.  
The AUTO PROGRAMMING function will start and the indicator blinks.  
SETUP TOUR  
NOW PROGRAMMING  
STOP BY -+  
To stop the AUTO PROGRAMMING function, press the MENU m buttons.  
When all the TV channels that can be received on your TV have been preset, the  
display goes out and the AUTO PROGRAMMING function operation is completed.  
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH  
PRESET function. For details, see page 15.  
6
Basic operation  
The illustration below is for the remote  
control RM-C367GY. Your remote control  
may not look exactly like the illustration.  
1 Press the POWER button to turn  
your TV on.  
• If your TV does not turn on, press the  
Main power button on the TV then press  
the POWER button again.  
You can also turn on your TV by pressing  
any of the following buttons;  
PICTURE  
ECO  
POWER  
BOOSTER  
SENSOR  
- the CHANNEL m button  
- the Number buttons  
SYSTEM  
COLOUR SOUND  
PICTURE  
MODE  
- the TV/VIDEO button  
1
2
3
6
9
TV/VIDEO  
2 Select a channel.  
4
5
8
0
Press the CHANNEL m button.  
OFF  
7
TIMER  
• Up/down selection cannot be selected for  
channels to which the SKIP has been set to  
“YES. See page 16.  
CHANNEL  
SCAN  
RETURN+  
- --  
/
DISPLAY  
MUTING  
Press the Number buttons to enter  
the channel number.  
MENU  
• If you want to enter a two-digit number,  
press the -/-- button to select the two digit  
mode “--”, then enter the channel  
number.  
CHANNEL  
VOLUME  
REMOTE CONTROL UNIT  
RM-C367GY  
3 Press the VOLUME M button to  
adjust the sound.  
4 To turn your TV off, press the  
POWER button.  
We recommend that you press the Main  
power button on the TV to turn the main  
power off if you do not plan to use your  
TV for a long time or if you wish to save  
energy.  
If the picture is not clear:  
Press the COLOUR SYSTEM button to  
select another colour system, see page 8.  
If the sound is not clear:  
Press the SOUND SYSTEM button to select  
another sound system, see page 8.  
Viewing Images from an External  
Device:  
Press the TV/VIDEO button to select the  
VIDEO mode.  
You can also use the INPUT function to select  
the VIDEO mode. For details, refer to page 12.  
7
Remote control buttons and functions  
ECO SENSOR button  
COLOUR SYSTEM button  
<AV-16N211 only>  
If the picture is not clear or no colour  
appears, change the current colour system  
to another colour system.  
You can adjust this TV so that the screen  
automatically adjusts to the optimum  
contrast according to the brightness of  
your room. This function reduces eye  
strain and the power consumption of this  
TV.  
Press this button to select the colour  
system.  
SECAM  
NTSC3.58  
AUTO  
PAL  
NTSC4.43  
Press this button to select the desired  
mode.  
AUTO:  
Automatic colour system selection.  
AI ECO SENSOR 1:  
• For the colour systems in each country or  
region, see the table “Broadcasting systems”  
on Back cover.  
The AI ECO SENSOR function switches  
on.  
Usually, it is recommended to watch the TV  
in this mode.  
• If the picture is not normal in the AUTO  
mode, change the AUTO mode to another  
colour system.  
AI ECO SENSOR 2:  
The AI ECO SENSOR function switches  
on.  
SOUND SYSTEM button  
If you feel the screen in the AI ECO  
SENSOR 1” mode is too dark, select this  
mode.  
If the sound is not clear even when the  
picture appears normal, change the  
current sound system to another sound  
system.  
AI ECO SENSOR OFF:  
The AI ECO SENSOR function switches  
off.  
Press this button to select the sound  
system.  
You can display on the screen the effect of the  
AI ECO SENSOR function.  
For details, see AI ECO DISPLAY” on page 14.  
B/G  
I
D/K  
M
• For the sound systems in each country or  
region, see the table “Broadcasting systems”  
on Back cover.  
PICTURE MODE button  
You can select one of three picture  
adjustment settings as you like.  
You cannot select any sound system when in  
a VIDEO mode.  
Press this button to select a mode.  
BRIGHT:  
Heightens contrast and sharpness.  
STANDARD:  
Standardizes picture adjustments.  
SOFT:  
Softens contrast and sharpness.  
• Pressing this button returns all the picture  
settings in “MENU 4” to their default settings.  
8
Remote control buttons and functions  
DISPLAY button  
PICTURE BOOSTER button  
You can continuously display the current  
channel number or VIDEO mode on the  
screen.  
When the picture is unclear because the  
reception level of the TV signal is low,  
activating the Picture Booster improves  
the picture clarity in some situations.  
Repeatedly press the PICTURE BOOSTER  
button to select the desired mode.  
Press this button.  
To turn the display off, press this button  
again.  
• When selecting a VIDEO mode with no  
signal, indication of the VIDEO mode  
becomes fixed on the screen.  
HIGH:  
The Picture Booster is functioning at  
maximum.  
LOW:  
The Picture Booster is functioning at  
minimum.  
MUTING button  
You can turn the sound off instantly.  
OFF:  
Press this button.  
The Picture Booster is off.  
To turn the sound on, press this button  
again.  
• If the picture becomes abnormal when you  
set the Picture Booster to HIGH, then set it to  
LOW or OFF.  
OFF TIMER button  
You can set the TV to automatically turn  
off after a set time.  
Press this button to select the period of  
time.  
You can set the period of time to a maximum  
of 120 minutes in 10 miniute increments.  
• 1 minute before the OFF TIMER function  
turns off the TV, GOOD NIGHT!” appears.  
To display the remaining time, press this  
button once.  
To cancel the OFF TIMER function,  
press this button to set the period of  
time to “0.  
• The OFF TIMER function will not turn off the  
TV’s main power.  
9
Remote control buttons and functions  
RETURN + button  
CHANNEL SCAN button  
You can set a channel you frequently view  
to the Return Channel and you can view  
that channel at any time with one-touch.  
You can quickly view all TV channels  
programmes that you can view on your  
TV, and search for the programme you  
want to view.  
To set the channel to the Return  
Channel:  
1 Press this button to start scanning  
TV channels.  
1 Select the channel you want to set  
to the Return Channel.  
The TV channel programmes are each  
displayed for several seconds.  
2 Press this button and hold until the  
message “RETURN PLUS  
• The programmes of TV channels for  
which the SKIP function is set to “YES”  
are not displayed. (See page 16.)  
PROGRAMMED!” appears.  
• When you turn off the TV, the Return  
Channel setting is canceled.  
2 When you find the programme you  
want to view, press this button  
again to stop scanning.  
To view the Return Channel:  
Press this button.  
You can view two channels (current channel  
and Return Channel) alternately by pressing  
this button.  
To cancel the Return Channel setting:  
Press this button and hold until the  
message “RETURN PLUS CANCELED!”  
appears.  
If no channel is set to the Return  
Channel:  
You can view the channel selected right  
before the current channel by pressing  
this button.  
10  
Using the TVs menus  
This TV has a number of functions you can operate using the menus. To use all your TV’s  
functions fully, you need to understand how to use the menus.  
3 Repeatedly press the  
MENU T buttons to select  
a desired function.  
CHANNEL  
RETURN+  
- --  
/
0
SCAN  
DISPLAY  
MUTING  
DISPLAY  
button  
4 Press the MENU M buttons to  
MENU  
/
MENU  
change function settings.  
MENU –/+  
buttons  
buttons  
Example:  
CHANNEL  
VOLUME  
Changes the AUTO  
SHUTOFF setting.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
OFF  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
ON  
3 Basic operation  
AI ECO DISPLAY  
ON  
AI ECO DISPLAY  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
1 Press the MENU T buttons.  
One of the 4 menus is displayed.  
• With some functions, the operation  
method may differ.  
MENU number  
5 Press the DISPLAY button to  
turn the display off.  
MENU  
1
TV  
INPUT  
The icon on  
the left indicates  
the currently  
ON TIMER  
PR 1 0:00  
To operate a menu using the buttons on  
the front panel of the TV, refer to  
“Operating menus” on page 18.  
selected function.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Repeatedly press the  
MENU T buttons to  
display a desired menu.  
• If you hold down the y button, the next  
menu is displayed.  
• If the selected function is on the first line,  
pressing the r button displays the  
preceding menu.  
11  
Using the TVs menus  
4 Press DISPLAY to turn the display  
off.  
INPUT  
You can view images from VCRs or other  
devices connected to your TV.  
• If you turn off the TV’s main power by  
pressing the Main power button, the ON  
TIMER function is canceled.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“INPUT”.  
• If you do not turn off the TV after starting  
the ON TIMER function, the channel will  
automatically switch to the channel set for  
the ON TIMER function.  
MENU  
1
TV  
INPUT  
ON TIMER  
PR 1 0:00  
When the time set for the ON TIMER  
function is reached:  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
The TV automatically turns on and the  
channel set for the ON TIMER function is  
displayed.  
• For safety reasons the TV will automatically  
turn off if no operations are made within  
approximately two hours after the TV is  
turned on with the ON TIMER function.  
2 Press MENU M to select the VIDEO  
mode.  
TV mode changes to VIDEO mode.  
• The OFF TIMER function and AUTO  
SHUTOFF function have priority over the ON  
TIMER function.  
ON TIMER  
Your TV will automatically turn on and  
tune into the channel you set after the  
period of time you set.  
1 Press MENU T to display the  
“MENU 1” menu, then select  
“ON TIMER”.  
MENU  
1
INPUT  
ON TIMER  
TV  
Channel  
No.  
PR 1 0:00  
OPERATE BY VOL-+  
SELECT BY  
PROGRAM BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M to select a channel  
you want to view when the TV turns  
on.  
3 Press VOLUME M to select the  
period of time after which you want  
to turn on the TV.  
The ON TIMER function starts.  
• Each time you press the button, the period  
of time changes in 15 minute intervals (up  
to 12 hours).  
To cancel the ON TIMER function,  
press the VOLUME m button to set the  
period of time to “0:00.  
12  
Using the TVs menus  
AUTO SHUTOFF  
BLUE BACK  
You can set your TV to turn off if no  
signals are received for about 15 minutes  
or longer after the end of a broadcast.  
If no signal is being received or the signal  
is very weak, a blue screen automatically  
becomes the picture background.  
If you wish to continue viewing the poor  
picture, you must set the BLUE BACK  
function to “OFF.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“AUTO SHUTOFF”.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“BLUE BACK”.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
AI ECO DISPLAY  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
AI ECO DISPLAY  
ON  
2 Press MENU M to select “ON”.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To cancel the AUTO SHUTOFF function,  
select “OFF.  
2 Press MENU M to select “ON”.  
• The AUTO SHUTOFF function does not  
turn off the TV’s main power.  
To cancel the BLUE BACK function,  
select “OFF.  
• The AUTO SHUTOFF will not work for a  
VIDEO mode.  
CHILD LOCK  
You can disable the front control buttons  
of the TV.  
When this function is set to “ON”, the TV  
can be operated using only the remote  
control.  
Use this function to prevent children from  
operating the TV without parental consent.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“CHILD LOCK”.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
AI ECO DISPLAY  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M to select “ON”.  
To cancel the CHILD LOCK function,  
select “OFF.  
• The CHILD LOCK function is canceled  
when you turn the power off.  
13  
Using the TVs menus  
AI ECO DISPLAY  
AUTO CH PRESET  
<AV-16N211 only>  
You can automatically preset all TV  
channels that can be received by your TV  
to channels.  
You can display on the screen the effect of  
the AI ECO SENSOR function.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“AUTO CH PRESET”.  
1 Press MENU T to display the  
“MENU 2” menu, then select  
“AI ECO DISPLAY”.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
OFF  
OFF  
OFF  
LANGUAGE  
ENGLISH  
AI ECO DISPLAY  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M to start the AUTO  
2 Press MENU M to select “ON”.  
CH PRESET function.  
The clover mark indicating the brightness of  
your room is displayed for several seconds  
each time the brightness changes. The  
number of clover marks displayed on screen  
increases as your room becomes darker.  
>>>ON SEARCH” is displayed on  
the screen.  
When all the TV channels that can be  
received on your TV have been preset,  
the display goes out and the AUTO CH  
PRESET function operation is  
completed.  
To cancel the AI ECO DISPLAY  
function, select “OFF.  
To stop the AUTO CH PRESET:  
Press the MENU m buttons.  
• The AUTO CH PRESET function does not  
preset a TV channel to the AV channel  
(channel number 0).  
SETUP TOUR  
You can start the SETUP TOUR function.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“SETUP TOUR”.  
• If the TV cannot preset the TV channel  
you want to view, preset it manually. For  
details, see “MANUAL CH PRESET” on  
page 15.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M.  
JVC logo is appear and the SETUP  
TOUR function will start.  
For details, see page 6.  
14  
Using the TVs menus  
If the picture is not clear:  
Fine-tune the TV channel.  
MANUAL CH PRESET  
You can manually preset desired TV  
channels to desired channels.  
1
Press MENU t to select “FINE”.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“MANUAL CH PRESET”.  
NO  
B/G  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
SELECT BY  
PROGRAM BY -+  
FINE  
PR 3 VL  
EXIT BY  
BY VOL-+ DISPLAY  
LANGUAGE  
ENGLISH  
2
Hold VOLUME m down to fine-tune  
the TV channel so that the best image  
is displayed on screen.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
“>” or “<” indicates that the TV is  
fine-tuning the TV channel.  
2 Press MENU M.  
The sub-menu is displayed.  
If the sound is not clear:  
MANUAL  
FINE  
SKIP  
NO  
SOUND SYSTEM  
EXIT  
B/G  
1
Press MENU t to select “SOUND  
SYSTEM”.  
SELECT BY  
PROGRAM BY -+  
SEARCH BY VOL-+ DISPLAY  
PR 1 VL  
EXIT BY  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
M
• The channel number is displayed as a PR  
number. For example, channel 1 will be  
displayed as PR 1. However, the AV  
channel will be displayed as AV.  
SELECT BY  
PROGRAM BY -+  
CHANGE BY VOL-+ DISPLAY  
PR 3 VL  
EXIT BY  
2
Press VOLUME m to select the  
appropriate sound system.  
3 Press MENU M to select the  
channel number.  
For the sound systems in each country  
or region, refer to the table  
“Broadcasting systems” on Back cover.  
4 Press VOLUME M to start  
searching for the TV channel.  
>>>” or “<<<” is displayed on the  
screen.  
5 Press MENU T to select  
“MANUAL”.  
When the TV finds a TV channel, the  
>>>” or “<<<” display goes out,  
and the TV channel is preset to the  
currently selected channel number.  
6 Repeat steps 3 to 5 if you want to  
preset another TV channel to a  
channel.  
• If the TV channel you want to preset is not  
displayed, repeat step 4 until the TV finds  
the TV channel you want to preset.  
To stop the MANUAL CH PRESET function,  
press any button other than the VOLUME  
m button.  
15  
Using the TVs menus  
SKIP  
LANGUAGE  
You can set undesired channels to be  
skipped. Channels set to be skipped  
cannot be selected by the CHANNEL m  
buttons or the CHANNEL SCAN button.  
• Channels to which TV channels have not  
been preset are automatically set to be  
skipped.  
You can select the language for the on-  
screen display.  
1 Press MENU T to display the  
“MENU 3” menu, then select  
“LANGUAGE”.  
MENU  
AUTO CH PRESET  
MANUAL CH PRESET  
SETUP TOUR  
3
1 Press MENU T to display the  
“MENU 3” menu, then select  
“MANUAL CH PRESET”.  
LANGUAGE  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU M.  
2 Press MENU M to select  
The sub-menu is displayed.  
language.  
The on-screen display indications are  
in the selected language.  
3 Press MENU T to select “SKIP”.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
M
Picture Adjustments  
You can adjust the picture as you like.  
SELECT BY  
PROGRAM BY -+  
YES/NO BY VOL-+ DISPLAY  
PR 3 VL  
EXIT BY  
1 Press MENU T to display the  
4 Press MENU M to select the  
“MENU 4” menu.  
channel you want to skip.  
MENU  
4
TINT  
COLOUR  
BRIGHT  
CONT.  
SHARP  
5 Press VOLUME M to select “YES”.  
The channel is set to be skipped.  
To cancel the SKIP function, select  
NO.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
6 Repeat steps 4 and 5 if you want to  
set another channel to skip.  
2 Press MENU T to select an item  
and press MENU M to adjust it.  
TINT*  
n : Reddish + : Greenish  
COLOUR  
BRIGHT  
CONT.  
n : Lighter  
n : Darker  
n : Lower  
n : Softer  
+ : Deeper  
+ : Brighter  
+ : Higher  
+ : Sharper  
SHARP  
*TINT (tint) is displayed only when  
viewing images from NTSC3.58 or  
NTSC4.43 colour systems.  
16  
TV buttons and parts  
<AV-21Y211>  
3
4
5
7 8 9  
0
1
2
ON TIMER POWER  
CHANNEL  
VOLUME  
EXIT  
MENU  
VIDEO  
AUDIO  
IN  
<AV-16N211>  
1
2
4
7
5
6
8
3
9
0
MENU  
CHANNEL  
VOLUME  
EXIT  
ON TIMER POWER  
VIDEO  
AUDIO  
IN  
7 Remote control sensor  
8 ON TIMER lamp  
The light is switched on while  
ON TIMER function is operating.  
9 POWER lamp  
When the Main power is on,  
the light is red.  
0 Main power button  
1Headphone jack  
2VIDEO/AUDIO terminal  
3 MENU buttons  
• MENU button  
• MENU m buttons  
4 CHANNEL m buttons  
5 VOLUME m buttons  
6 AI ECO sensor  
17  
Using the buttons on the TV  
Basic operation  
Operating menus  
Check to make sure the CHILD LOCK  
function is set to “OFF. When the CHILD  
LOCK function is set to “ON”, the TV  
cannot be operated using the front control  
buttons. For details, see “CHILD LOCK” on  
page 13.  
You can operate functions in menus using  
the front control buttons on the TV.  
1 Press MENU y to display a menu.  
2 Press MENU y repeatedly to display  
the menu you want to use.  
1 Press CHANNEL M to turn the TV  
3 Press MENU y to select the desired  
on from standby mode.  
function or item.  
2 Press CHANNEL M to select a  
4 Press MENU M or VOLUME M to  
carry out the desired operation.  
For details, see the description for each  
function.  
channel.  
3 Press VOLUME M to adjust the  
volume.  
5 Press VOLUME M to turn the menu  
4 To turn your TV off, press the Main  
power button to turn off the TV’s  
main power.  
display off.  
To turn the sub-menu display off:  
To change the TV mode to the VIDEO  
mode:  
• Press the TV/VIDEO button if the TV has one.  
See page 7.  
1
Press MENU y to select “EXIT”.  
MANUAL  
FINE  
SKIP  
SOUND SYSTEM  
EXIT  
NO  
M
• If the TV has no TV/VIDEO button, select the  
VIDEO mode with the INPUT function in  
MENU 1.  
SELECT BY  
PROGRAM BY -+  
EXIT  
PR 3 VL  
EXIT BY  
BY VOL-+ DISPLAY  
2
Press VOLUME m to turn the display  
off.  
18  
Troubleshooting  
If there is no picture or the TV does not operate normally, make sure the problem isn’t  
due to the reasons indicated below.  
If the problem persists even after taking the measures indicated, please contact a  
service technician.  
Cannot turn the TV on  
Poor picture  
• Press the Main power button on the TV.  
• Connect the power cord to the AC outlet.  
• Press the COLOUR SYSTEM button to select  
another colour system. (see page 8.)  
• Adjust the picture settings. (see page 16.)  
• Set the Picture mode to STANDARD.  
(see page 8.)  
The screen turns blue  
• Is the BLUE BACK function on?  
(see page 13.)  
• If noise (snow) totally blocks out the  
picture, check the following.  
- Have the TV and aerial been connected  
properly?  
Remote control inoperable  
- Has the aerial cable been damaged?  
- Is the aerial pointing in the right direction?  
- Is the aerial itself faulty?  
• Replace the batteries. (see page 3.)  
Buttons on front of the TV do not  
work  
• If the TV or aerial suffer interference from  
other equipment, stripes or noise may  
appear in the picture. Move any equipment  
which can cause interference away from the  
TV.  
• Switch the CHILD LOCK function off.  
(see page 13.)  
• If the TV or aerial suffer interference from  
signals reflecting from mountains or  
buildings, double-pictures (ghosting) will  
occur. Change the aerial’s direction or  
replace it with an aerial with better  
directionality.  
TV does not respond immediately  
• Press the main power button on the TV to  
turn off the main power. Press the main  
power button again to turn on the TV. If the  
TV returns to a normal state, operation is  
normal.  
• When a white and bright still image (such  
as a white dress) is displayed on the screen,  
the white part may look as if it is coloured.  
When the image disappears from the screen,  
the unnatural colours will also disappear.  
The TV turns off suddenly  
• Is the OFF TIMER function set to operate?  
(see page 9.)  
The TV turns on suddenly  
• Is the AUTO SHUTOFF function on?  
(see page 13.)  
• Is the ON TIMER function set to operate?  
(see page 12.)  
• Have you not performed an operation for  
about two hours after the TV was switched  
on by the ON TIMER function?  
(see page 12.) If you don’t perform an  
operation within about two hours, the TV is  
automatically switched off for safety.  
The TV channel changes suddenly  
• Is the ON TIMER function set to operate?  
(see page 12.)  
Poor sound  
• Press the SOUND SYSTEM button to select  
another sound system. (see page 8.)  
19  
Specifications  
Model  
AV-21Y211  
AV-16N211  
TV RF systems  
Colour systems  
B, G, I, D, K, M  
PAL, SECAM, NTSC3.58 / 4.43 MHz  
Channel and frequencies VHF low channel (VL)  
VHF high channel (VH)  
= 46.25 to 140.25 MHz  
= 147.25 to 423.25 MHz  
= 431.25 to 863.25 MHz  
UHF channel (U)  
Receives cable channels in mid band (X to Z, S1 to S10),  
super band (S11 to S20) and hyper band (S21 to S41).  
Power input  
AC110 to 240V, 50 / 60 Hz  
Power consumption  
Maximum 90 W,  
Average 60 W  
Maximum 85 W,  
Average 54 W  
Screen size  
(measured diagonally)  
Picture tube 548 mm  
Visible area 508 mm  
Picture tube 423 mm  
Visible area 380 mm  
Audio output  
5W  
5W  
(Rated power output)  
Speakers  
(6 cm x 12 cm) oval x 2  
(5 cm x 9 cm) oval x 2  
External input / output  
INPUT:  
VIDEO input (RCA), AUDIO input (RCA)  
VIDEO output (RCA), AUDIO output (RCA)  
stereo mini jack (3.5 mm diameter)  
OUTPUT:  
Headphone jack:  
Dimensions (W x H x D) 649 mm x 470.5 mm x  
477.5 mm  
518 mm x 391.5 mm x  
403 mm  
Weight  
21 kg  
13 kg  
Accessories  
Remote control unit: RM-C375GY x 1 • Remote control unit: RM C367GY x 1  
• AA / R6 / UM-3 dry cell battery x 2  
• Matching aerial adapter x 1  
• Rod aerial x 1  
• AA / R6 / UM-3 dry cell battery x 2  
• Matching aerial adapter x 1  
• Rod aerial x 1  
Design and specifications subject to change without notice.  
Broadcasting systems  
System  
Area  
Country or Region  
Colour  
Sound  
Bahrain, Kuwait, Oman, Qatar,  
United Arab Emirates, Yemen, etc.  
Indonesia, Malaysia, Singapore, Thailand,  
India, etc.  
China, Vietnam, etc.  
Hong Kong, etc.  
PAL  
B/G  
Asia,  
Middle  
East  
PAL  
PAL  
D/K  
I
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
SECAM  
NTSC  
SECAM  
PAL  
PAL  
PAL  
B/G  
M
D/K  
D/K  
B/G  
I
Europe  
Oceania Australia, New Zealand, etc.  
Republic of South Africa, etc.  
PAL  
PAL  
B/G  
I
Africa  
Nigeria, etc.  
Egypt, Morocco, etc.  
PAL  
SECAM  
B/G  
B/G  

IBM T54A User Manual
JVC Computer Monitor DT F9L5 User Manual
JVC KS RF50 User Manual
Kenmore Convection Oven 790 4940 User Manual
KitchenAid KECC507GBL3 User Manual
LG Electronics LCG3691ST User Manual
LG Electronics W2343T User Manual
Monessen Hearth WC500 User Manual
Palsonic 5138HT User Manual
Philips 170V7FB_ Svart User Manual