JVC AV 32WFR1EK AV 28WFR1EK User Manual

COLOUR TELEVISION

AV-32WFR1EK

AV-28WFR1EK

CONTENTS

SAFETY PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . 2

PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

T-V LINK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . 7

BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . 8

REMOTE CONTROL BUTTONS AND FUNCTIONS . 11

MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . . 16

PICTURE SETTING. . . . . . . . . . . . . . . . . . . . . . . . . 17

PICTURE FEATURES. . . . . . . . . . . . . . . . . . . . . . . 18

SOUND SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . 20

DIGITAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . 21

HEADPHONE SURROUND . . . . . . . . . . . . . . . . . . 23

EXT SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

INSTALL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ADDITIONAL MENU OPERATIONS . . . . . . . . . . . . 33

ADDITIONAL PREPARATION. . . . . . . . . . . . . . . . . 36

TV BUTTONS AND PARTS. . . . . . . . . . . . . . . . . . . 38

TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . 39

SPECIFICATIONS. . . . . . . . . . . . . . . . . . . Back cover

INSTRUCTIONS

■

ꢀꢁꢂꢃꢄꢅꢂꢆꢄꢇꢈꢉꢊꢋꢈꢌꢍꢉꢄꢈꢎꢏꢄꢋꢍ ꢂꢊꢆ

This equipment has been designed and manufactured to comply with international safety standards. However, as with any elec-

trical appliance, care must be taken to ensure optimal results and operational safety.

• Before attempting to use this equipment, read the operating instructions thoroughly.

• Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made in accordance with the

manufacturer’s instructions.

• If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.

• Handle all glass panels or covers with care.

• Never operate this equipment if it appears damaged or operates abnormally. Turn the power off, disconnect the main power

plug and consult your dealer.

• Never remove any affixed panels or covers. Doing so may result in electrical shock.

• Never leave this equipment operating unattended unless otherwise specifically stated that it is designed to do so or in standby

mode. Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do

so. Make special arrangements for infirm or handicapped persons.

• Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.

• Never listen to headphones at high volume. Doing so may damage your hearing.

• Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage.

• Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs,

use only the fixtures provided and follow the installation instructions.

• Never allow this equipment to be exposed to rain or moisture.

• Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may result in a fatal electrical

shock.

• Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.

ꢀ

ꢀꢁꢂꢀꢃꢁꢃꢄꢅꢆꢇ

■ ꢀꢁꢂꢂꢃꢄꢅꢆꢂꢇ ꢅꢈꢃ ꢉꢃꢊꢆꢋꢌ ꢋꢂꢍ ꢎꢀꢏ

→

If connecting a VCR, follow A

If not connecting a VCR, follow 1

→

AC Outlet

(AC 220 - 240 V,

50 Hz)

*1: To operate T-V LINK functions, a T-V LINK compatible

VCR must be connected to the EXT-2 terminal on the TV.

For details about T-V LINK functions, see “T-V LINK

FUNCTIONS” on page 7.

UHF Aerial

Note:

Power

Cord

• For further details, refer to the manuals provided with the

devices to be connected.

75-ohm

Coaxial

Cable

• The connecting cables are not provided.

• A video can be viewed from the VCR without performing

C. For details, refer to your VCR instruction manual.

• To connect additional external devices, please see “AD-

DITIONAL PREPARATION” on page 36.

• To connect external speakers and audio system, please

see “Connecting Speakers/Amplifier” on page 37.

• When a decoder is connected to a T-V LINK compatible

VCR, set the DECODER (EXT-2) function to ON. For de-

tails, see “Using the DECODER (EXT-2) function” on

page 33. Otherwise, you will not be able to view scram-

bled channels.

AUDIO OUT

EXT-2

EXT-3

)

EXT-1

SURROUND

REAR

Aerial

Plug

21-pin SCART Cable

Aerial Plug

75-ohm Coaxial

Cable

VCR

To Aerial

Input

Aerial Plug

To Aerial

Output

AV IN/OUT

Terminal

■ ꢐꢑꢅꢅꢆꢂꢇ ꢒꢋꢅꢅꢃꢊꢆꢃꢓ ꢆꢂꢅꢁ ꢅꢈꢃ ꢏꢃꢔꢁꢅꢃ ꢀꢁꢂꢅꢊꢁꢌ

Use two AAA/R03 dry cell batteries.

Insert the batteries from the ꢀ end, making sure the ꢁ and ꢀ

polarities are correct.

To open the battery compartment, slide the door downwards

and lift off. Replace the door by sliding it upwards until it is se-

cure.

Note:

• Follow the warnings printed on the batteries.

• Battery life is about six months to one year, depending

on your frequency of use.

• If the remote control does not work properly, replace the

batteries.

• The batteries we supply are only for setting up and test-

ing your TV, please replace them as soon as necessary.

• Always use good quality batteries.

ꢀ

PREPARATION

■ ꢕꢂꢆꢅꢆꢋꢌ ꢖꢃꢅꢅꢆꢂꢇꢓ

When the TV is first turned on, it enters the initial setting

mode, and the JVC logo is displayed. Follow the instructions

on the on-screen display to make the initial settings.

Press the Main power button on the TV.

The Power lamp lights red (for power on), then green (for

TV on) and the JVC logo is displayed.

Main power button

Power lamp

Note:

• If the power lamp stays red and does not change to

green:

Your TV is in the standby mode. Press the

ꢀ

(Standby) button on the remote control to turn your

TV on.

• The JVC logo does not appear when your TV has

been turned on once.

In this case, use the “LANGUAGE” and “AUTO PRO-

GRAM” functions to make the initial settings. For de-

tails, see “INSTALL” on page 28.

2 Press the

button.

The LANGUAGE menu appears.

ꢀ

RM-C52

3 Press the ꢀ buttons to choose ENG-

LISH.

English is set for the on-screen display description.

ꢁ

PREPARATION

4 Press the

button to start the AUTO

PROGRAM function.

ꢀ

Note:

• BBC1, BBC2, ITV, CHANNEL4 and CHANNEL 5 are

automatically set to the Programme numbers PR 1 to

PR 5. SKY 1 is set to the Programme number PR 6,

but no TV channel name (ID) be set. If the TV doesn’t

receive one of these TV channels, that Programme

number (PR) will not be set.

The AUTO PROGRAM menu appears and received TV

channels are automatically registered in the Programme

numbers (PR).

• To receive SKY 1 a satelite tuner is needed. You

must have the satelite tuner set to SKY 1 before

starting the AUTO PROGRAM function.

• If a TV channel you want to view is not set to a Pro-

gramme number (PR), manually set it using the

MANUAL function. For details, see “EDIT/MANUAL”

on page 29.

• The TV channel is not registered in Programme

number PR 0 (AV). When you want to register a TV

channel to PR 0 (AV), manually set it using the MAN-

UAL function. For details, see “EDIT/MANUAL” on

page 29.

• In some areas TV reception is possible from more

than one transmitter, e.g. different ITV regions. In

this case each TV channel may be set twice. If this

happens the first set of channels will have the

stronger signal. If you want to delete the second set

of channels, you will have to do it manually, see

page 31.

To cancel the AUTO PROGRAM function:

Press the

button.

ꢀ

5 After the TV channels have been regis-

tered in the Programme numbers (PR),

the EDIT menu appears.

You can proceed to edit the Programme numbers (PR)

using the EDIT/MANUAL function. For details, see “ED-

IT/MANUAL” on page 29.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function,

go to the next step.

If you have had any problems setting up

your new TV, please call the

0181-208-7654

Helpline at

6 Press the

button to display the T-V

ꢀ

LINK menu.

Enjoy your new

TV!

7 Operate the T-V LINK menu according

to the type of a VCR connected to the

EXT-2 terminal.

When a T-V LINK compatible VCR is not con-

nected:

Press the

button to exit the T-V LINK menu.

ꢀ

The T-V LINK menu disappears.

When a T-V LINK compatible VCR is connected:

Follow the operating procedure “Downloading the data

to VCR” on page 33 to transmit the Programme number

(PR) data.

8 Now, the initial settings are complete,

and you can watch the TV.

ꢀ

ꢄ ꢈꢉꢊꢅꢇꢋꢉꢌꢍꢇꢎꢄꢅꢆꢇꢏ

When a T-V LINK compatible VCR is connected to the EXT-

2 Terminal on the TV, it is easier to set up the VCR and to

Note:

view videos. T-V LINK uses the following features:

• Operation via the TV is not possible.

• Generally, the VCR cannot record a TV channel that can-

not be received properly by the VCR’s tuner, even though

you can view that TV channel on the TV. However, some

VCRs can record a TV channel by using the TV’s output

if that channel can be viewed on the TV, even though the

TV channel cannot be received properly by the VCR’s

tuner. For details, refer to your VCR instruction manual.

To use T-V LINK functions:

A T-V LINK compatible VCR is necessary.

The VCR must be connected to the EXT-2 terminal on the TV

by a fully wired SCART cable.

Note:

• A “T-V LINK compatible VCR” means a JVC VCR with the

T-V LINK logo or a VCR with one of the following logos.

However, these VCRs may support some or all of the fea-

tures described below. For details, refer to your VCR in-

struction manual.

■ ꢚꢎ ꢉꢑꢅꢁ ꢐꢁꢙꢃꢊ ꢛꢂꢜꢎꢀꢏ

ꢕꢔꢋꢇꢃ ꢎꢆꢃꢙ

When the VCR starts playing, the TV automatically turns on

and the images from EXT-2 terminal are displayed on the

screen.

When the VCR menu is operated, the TV automatically turns

on and the images from EXT-2 terminal are displayed on the

screen.

“Q-LINK” (a trademark of Panasonic Corporation)

“Data Logic” (a trademark of Metz Corporation)

“Easy Link” (a trademark of Phillips Corporation)

“Megalogic” (a trademark of Grundig Corporation)

“SMARTLINK” (a trademark of Sony Corporation)

■ ꢐꢊꢃꢗꢓꢃꢅ ꢘꢁꢙꢂꢌꢁꢋꢍ

Download the registered data on the TV channels from the TV

to the VCR.

The Preset Download function automatically begins when the

initial setting is complete or whenever the AUTO PROGRAM

or EDIT/MANUAL operations are performed.

Note:

• This function does not operate if your TV’s main power is

turned off. Set your TV’s main power to on (standby

mode).

Note:

• This function can be operated via VCR operation.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download

was not performed correctly. Before trying to download again,

ensure the following:

• The VCR power is turned on.

• The VCR is T-V LINK compatible.

• The VCR is connected to the EXT-2 terminal.

• The SCART cable is fully wired.

■ ꢘꢆꢊꢃꢄꢅ ꢏꢃꢄ

“What You See Is What You Record”

You can record to VCR the images that you are currently

viewing on TV by a simple operation.

For details, read the manual for your VCR.

Operate via the VCR. “VCR IS RECORDING” is displayed.

In the following conditions, the VCR will stop recording if

the TV is turned off, if the TV channel or input is switched,

or if the menu is displayed on the TV:

• When recording images from an external device connected

to the TV.

• When recording a TV channel after it has been unscrambled

on a decoder.

• When recording a TV channel by using the TV’s output be-

cause that TV channel cannot be properly received on the

VCR’s tuner.

ꢂ

ꢐꢃꢏꢅꢎꢉꢆꢀꢂꢁꢃꢄꢅꢆꢇ

■ ꢚꢑꢊꢂ ꢅꢈꢃ ꢝꢋꢆꢂ ꢁꢙꢃꢊ ꢁꢂ

Press the Main power button on the TV.

The Power lamp lights red and your TV is in the standby mode.

Note:

• If the Power lamp lights green, the TV is already on.

To turn the Main power off:

Press the Main power button again.

The Power lamp goes off.

Note:

• To save energy, turn the main power off if you are not us-

ing the TV for a long period of time.

Main power button

Power lamp

■ ꢚꢑꢊꢂ ꢅꢈꢃ ꢚꢎ ꢁꢂ !ꢊꢁꢔ ꢓꢅꢋꢂꢍ"# ꢔꢁꢍꢃ

Press the

(Standby) button, the

ꢀ

ꢁ

button, the

buttons.

buttons or the Number

ꢀ

The Power lamp lights red to green and your TV will be turned on.

To turn the TV off:

Number

buttons

Press the

(standby) button again.

ꢀ

The Power lamp changes from green to red and the TV enters

standby mode.

■ ꢀꢈꢁꢁꢓꢃ ꢋ ꢚꢎ ꢄꢈꢋꢂꢂꢃꢌ

Choose a Programme number (PR) in which the desired Pro-

gramme TV channel has been set.

Use the ꢂ buttons:

Press the ꢂ buttons to choose the desired Pro-

gramme number (PR).

Use the Number buttons:

Enter the desired Programme number (PR) with the

Number buttons.

Example

→

• PR12

• PR6

press ~ and Ÿ.

→

press ¤.

Use the PR LIST:

1 Press the ꢁ (Information) button to

RM-C52

display the PR LIST.

ꢃ

2 Press the ꢁ

ꢂ

andꢂ

ꢃ

buttons to choose a

2 Press the

buttons to choose

button.

• You cannot use the ꢀ buttons to choose a Pro-

Press the

ume.

buttons to adjust the vol-

Press the

tons.

button, the

buttons or the Number but-

Use the ꢀ buttons:

Press the ꢀ buttons to choose an EXT terminal

BASIC OPERATION

Programme number (PR). Then press the

button.

ꢂ

Use the PR LIST:

1 Press the

(Information) button to

ꢁ

Note:

display the PR LIST.

• For Programme numbers (PR) with the CHILD

LOCK function set, the (CHILD LOCK) mark is

displayed next to the Programme number (PR) in

the PR LIST

ꢁꢂ

ꢂꢀ

and

ꢄ

an EXT terminal. Then press the

ꢂ

Note:

gramme number (PR) with the CHILD LOCK fun-

tion set.

• The EXT terminals are registered after the Pro-

gramme number PR 99.

• Even if you try to choose a Programme number

• You can choose a video input signal from the S-VID-

EO signal (Y/C signal) and regular video signal

(composite signal). For details, see “ꢀ(S-VIDEO

input)” on page 24.

• If you do not have a clear picture or no colour ap-

pears, change the colour system manually. See

“COLOUR SYSTEM” on page 18.

(PR) with the CHILD LOCK function set, the

ꢄ

(CHILD LOCK) mark will appear, and you cannot

watch the TV channel. To watch the TV channel,

see “CHILD LOCK” on page 26.

• If the picture is tilted, correct it. See “PICTURE

TILT” on page 19.

•

When choosing an EXT terminal with no input signal,

the EXT terminal number becomes fixed on the screen.

■ ꢉꢍ$ꢑꢓꢅ ꢅꢈꢃ %ꢁꢌꢑꢔꢃ

• This TV set has a function which can automatically

change over the input according to a special signal

output from an external device.(The EXT-4 terminal

does not support it.)

ꢃ

The Volume indicator appears and the volume changes as

you press the –/+ buttons.

To return to a TV channel:

ꢀ

ꢄ

■ &ꢋꢅꢄꢈ ꢆꢔꢋꢇꢃꢓ !ꢊꢁꢔ ꢃ'ꢅꢃꢊꢂꢋꢌ

ꢍꢃ%ꢆꢄꢃꢓ

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial

cable, choosing the Programme number PR 0 (AV) al-

lows you to view images from the VCR. Set the VCR RF

channel to the Programme number PR 0 (AV) manually.

For details, see “EDIT/MANUAL” on page 29.

Choose an EXT terminal to which the desired external device

has been connected.

Use the

button:

ꢅ

Pressing the

button changes the choice as follows:

ꢅ

Press the

button to choose an EXT terminal.

ꢅ

Pressing the

button changes the choice as follows:

ꢅ

TV mode

PR 0

EXT modes

EXT-1

EXT-2

EXT-3

TV mode

EXT modes

Programme

numbers

Programme

numbers

PR 1 – PR 99

EXT-1

EXT-4

EXT-2

EXT-3

EXT-4

Note:

• The VCR RF channel is sent as the RF signal from

the VCR.

• Also refer to your VCR instruction manual.

ꢄ

BASIC OPERATION

■ ꢛ ꢃꢊꢋꢅꢆꢂꢇ ꢙꢆꢅꢈ ꢅꢈꢃ "ꢑꢅꢅꢁꢂꢓ ꢁꢂ ꢅꢈꢃ ꢚꢎ

1 ^{Press the P ꢁ buttons to turn the}

TV on from standby mode.

Press the P

ꢁ

buttons to choose a

Programme number (PR) or an EXT ter-

minal.

(Behind the front cover)

3 ^{Press the}ꢀ (Volume) button and the

^ꢆbuttons to adjust the volume.

1 Press the ꢇ (Volume) button.

The volume level indicator appears.

2 Press the ꢆ buttons while the volume lev-

el indicator is displayed.

ꢅꢆ

ꢀꢁꢂꢃꢄꢁꢅꢆꢃꢇꢄꢀꢃ ꢅꢈꢉꢄꢄꢃꢇꢊꢅꢋꢇꢌꢅꢍꢉꢇꢆꢄꢎꢃꢇꢊ

ꢇꢈꢉꢊꢋꢌꢍꢇꢈꢈꢎꢊ

You can turn the volume off instantly.

Press the

(Muting) button to turn off the

ꢅ

Volume. Pressing the

(Muting) button

ꢅ

again resumes the previous Volume level.

2 ꢏꢇꢐꢑꢒꢓꢌꢍꢇꢈꢈꢎꢊꢔ

You can choose a Programme number (PR) by

entering the Programme number.

Example:

→

• PR12

press ~ and Ÿ.

→

• PR6

press ¤.

You can also press the

EXT terminal.

button repeatedly to choose an

ꢅ

3 ꢕꢖꢖ ꢌꢍꢇꢈꢈꢎꢊ

You can change the screen size according to the picture as-

pect ratio. Choose the optimum one from in the following

ZOOM modes.

AUTO:

For any picture format except Normal Picture (4:3 Aspect Ra-

tio), the picture will be automatically displayed in the optimum

screen size.

For Normal Picture (4:3 Aspect Ratio), the picture displayed

in accordance with the ZOOM mode set on the 4:3 AUTO AS-

PECT menu. For details, see “4:3 AUTO ASPECT” on

page 18.

Note:

• AUTO may not function properly with poor signal quality.

In this case, choose an optimum ZOOM mode manually.

• This TV supports WSS (wide-screen signals). When

broadcasts with WSS are received with the ZOOM mode

set at AUTO, the most suitable ZOOM mode is automati-

cally chosen according to the WSS received.

• When the special signal output from an external device is

received with the ZOOM mode set to AUTO, the ZOOM

mode automatically changes to 16:9 ZOOM. (The EXT-4

terminal does not support it.)

RM-C52

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as its original

size is.

How to open the cover

PANORAMIC:

This mode stretches the left and right sides of a normal pic-

ture (4:3 Aspect Ratio) to fill the screen, without making the

picture appear unnatural.

Note:

• The top and bottom of the picture are slightly cut off.

ꢅꢅ

3 While it is displayed, press the

buttons

2 Press the

buttons to choose a ZOOM

REMOTE CONTROL BUTTONS AND FUNCTIONS

14:9 ZOOM:

This mode zooms up the Wide Picture (14:9 Aspect Ratio) to

the upper and lower limits of the screen.

ꢛꢚꢜꢇꢔꢈꢉꢊꢋꢌꢈꢙꢒꢌ ꢉꢔꢉꢑ!ꢒꢌ"ꢓꢒ"ꢌꢎ#ꢌꢈꢙꢒꢌ$ꢉ%&

ꢈꢇꢓꢒ

If subtitles or the top (or bottom) of the picture are cut off, ad-

just the visible area of the picture manually.

1 Press the

button.

ꢁ

The ZOOM menu appears.

16:9 ZOOM:

This mode zooms up the Wide Picture (16:9 Aspect Ratio) to

the full screen.

2 Press the

button to display the ZOOM

ꢂ

mode indication.

Indicator is displayed.

ꢃ

16:9 ZOOM SUBTITLE:

to adjust the visible area vertically.

This mode zooms up the Wide Picture (16:9 Aspect Ratio)

with subtitles to the full screen.

Note:

• You cannot adjust the visible area in REGULAR or

FULL mode.

4 '(ꢌꢍꢇꢈꢈꢎꢊ

You can turn the PRO LOGIC 3D-PHONIC function on or off,

or you can switch to the 3D HEADPHONE function by one-

touch operation.

FULL:

This mode uniformly stretches the left and right sides of a nor-

mal picture (4:3 aspect ratio) to fill the wide TV screen.

Press

button.

ꢆ

Pressing

button changes the function as follows:

ꢂ

Note:

• Use for pictures with a 16:9 aspect ratio that have been

squeezed into a normal picture (4:3 aspect ratio), you

can restore their original dimensions.

ꢘꢙꢎꢎꢔꢒꢌꢈꢙꢒꢌꢕꢖꢖ ꢌꢐꢎꢚꢒ

Previous surround function

1 Press the

menu.

button to display the ZOOM

ꢁ

Note:

• If some other surround function is activated before you

press the

tion.

button, you can return to that surround func-

• The PRO LOGIC 3D-PHONIC function will be activated

when no headphones are connected. For details, see

“PRO LOGIC 3D-PHONIC” on page 21.

• The 3D HEADPHONE function will be activated when

headphones are connected. For details, see “3D HEAD-

PHONE” on page 23.

• The 3D lamp on the TV lights when the PRO LOGIC 3D-

PHONIC function is activated.

ꢃ

mode. Then press the

button.

ꢂ

The picture expands and the chosen ZOOM mode is dis-

played in about 5 seconds.

Note:

• You can pre-set a ZOOM mode for the normal pic-

ture. See “4:3 AUTO ASPECT” on page 18.

ꢅꢗ

Press the

buttons to choose an Pro-

REMOTE CONTROL BUTTONS AND FUNCTIONS

5ꢌ)ꢊ#ꢎꢓꢐ"ꢈꢉꢎꢊꢌꢍꢇꢈꢈꢎꢊ

You can display the PR LIST or the Current Time on the

screen.

8 ,ꢈ"ꢊꢚꢑ-ꢌꢍꢇꢈꢈꢎꢊ

Press the

on or off.

(Standby) button to turn the TV

ꢇ

Press the

Pressing the

(Information) button.

(Information) button changes the dis-

ꢃ

When the TV is turned on, the power lamp changes from red

to green.

play as follows:

9 ꢘꢎ!ꢎꢇꢓꢌꢍꢇꢈꢈꢎꢊꢔ

The colour buttons are used for the teletext operations or the

menu operations. For details, see “~ Teletext Control But-

tons and VCR/ꢄ/DVD Switch” on page 14 or “MENU OPER-

ATION” on page 16.

0 ꢖ.ꢌꢍꢇꢈꢈꢎꢊ

The

button is used to operate menus. For details, see

ꢄ

“MENU OPERATION” on page 16.

ꢀ

ꢌꢍꢇꢈꢈꢎꢊꢔ

You can choose a Programme number (PR) or an EXT termi-

nal.

Current time

No indication

ꢀ

gramme number (PR) or an EXT terminal.

The

buttons are also used to operate menus.

ꢀ

Note:

For details, see “MENU OPERATION” on page 16.

• You can choose Programme numbers (PR) or EXT termi-

nals with the PR LIST. For details, see “Use the PR LIST:”

on page 8.

• This TV uses teletext data to set the current time. If the TV

has not received a TV channel that has teletext pro-

grammes since it was turned on, the time display is blank.

To view the current time, choose a TV channel that has

teletext programmes. The time will still be displayed as

long as you do not turn off the TV, even if you choose oth-

er TV channels.

= +ꢘ/0(+(ꢌ ꢘꢎꢊꢈꢓꢎ!ꢌ ꢍꢇꢈꢈꢎꢊꢔꢌ "ꢊꢚ

+ꢘ/0ꢁ0(+(ꢌ,1ꢉꢈ%ꢙ

These buttons can be used to operate a JVC brand VCR or

DVD player. Pressing the button having the same appear-

ance as the original remote control button of a device makes

the function work in the same way as the original remote con-

trol.

• When watching videos, an incorrect current time is some-

1 Set the VCR/ꢅ/DVD Switch to the VCR or

times displayed.

DVD position.

VCR:

When you are operating the VCR, set the switch to the

VCR position.

• The

(Information) button is also used to operate

ꢃ

menus. For details, see “MENU OPERATION” on

page 16.

DVD:

6 *+ꢌꢍꢇꢈꢈꢎꢊ

You can return to a TV channel instantly.

When you are operating the DVD player, set the switch

to the DVD position.

Press the

button.

ꢄ

(Text):

ꢈ

The TV returns to the TV mode and a TV channel appears.

When you are viewing Teletext programmes, set the

switch to the (Text) position.

ꢈ

Note:

• The

button is also used to operate menus. For details,

2 Press the VCR/DVD Control Button to con-

trol your VCR or DVD player.

see “MENU OPERATION” on page 16.

7 ꢄꢌꢍꢇꢈꢈꢎꢊꢔ

You can adjust the volume.

Note:

• If your device is not made by JVC, these buttons

cannot be used.

• Even if your device is made by JVC, some of these

buttons or any one of the buttons may not work, de-

pending on the device.

Press the ꢁ buttons to adjust the sound.

Note:

• You can use the

buttons to choose a TV channel

ꢁ

• The ꢁ buttons are also used to operate menus. For de-

tails, see “MENU OPERATION” on page 16.

the VCR will receive or choose the chapter the DVD

player plays back.

• Some DVD player models use the

buttons for

ꢁ

both operation of Fast forward/backward functions

and choosing the chapter. In this case, the 1/¡

the buttons do not work.

ꢅ'

REMOTE CONTROL BUTTONS AND FUNCTIONS

■ ~ ꢚꢃꢌꢃꢅꢃ'ꢅ ꢀꢁꢂꢅꢊꢁꢌ ꢒꢑꢅꢅꢁꢂꢓ ꢋꢂꢍ ꢎꢀꢏꢜꢀꢜꢘꢎꢘ ꢖꢙꢆꢅꢄꢈ

3 Press and hold down

button.

ꢃ

The four page numbers blink white to indicate that they

are stored in memory.

ꢍ"ꢔꢉ%ꢌꢎ$ꢒꢓ"ꢈꢉꢎꢊ

You can view two types of teletext broadcasts on the TV:

FLOF (Fastext) and WST.

1 Choose a TV channel with a teletext broad-

cast.

To call up a stored page:

1 Press the ꢂ button to engage the List

2 Set the VCR/ꢅ/DVD switch to the

(Text)

mode.

ꢅ

position.

2 Press a colour button to which a page has

been assigned.

3 Press ꢆ (Text) button to display the

To exit the List mode:

teletext.

Press the

button again.

Pressing ꢅ (Text) button changes the mode as fol-

lows:

4ꢎ!ꢚ

You can hold a teletext page on the screen for as long as you

want, even while several other teletext pages are being re-

ceived.

Press the ꢄ button.

TV mode

Text mode

Hold indication

4 Choose a teletext page by pressing the

ꢃ

buttons, Number buttons or Colour

buttons.

To cancel the Hold function:

To return to the TV mode:

Press ꢈ button again.

Press the

button or

(Text) button.

ꢅ

ꢄ

,ꢇꢑ&$"ꢋꢒ

Some teletext pages include sub-pages that are automatically

displayed.

Note:

• If you have trouble receiving teletext broadcasts,

consult your local dealer or the teletext station,

• In the Text mode, the ZOOM mode is fixed to the

FULL mode.

• No menu operations are possible when viewing a

teletext programme.

You can hold any sub-page, or view it at any time.

1 Press the ꢅ button to operate the Sub-

page function.

2 Press the Number buttons to enter a sub-

page number.

2ꢔꢉꢊꢋꢌꢈꢙꢒꢌ3ꢉꢔꢈꢌ ꢎꢚꢒ

You can store the numbers of your favourite teletext pages in

memory and call them up quickly using the colour buttons.

Example:

• 3rd sub-page → press ), ), ) and 3.

To store the page numbers:

To cancel the Sub-page function:

Press the ꢅ button again.

1 Press ꢂ button to engage the List mode.

The stored page numbers are displayed at the bottom of

the screen.

Note:

• You can also choose a sub-page by pressing the

red or green button.

2 Press a Colour button to choose a posi-

tion. Then press the Number buttons to en-

ter the page number.

ꢅꢀ

REMOTE CONTROL BUTTONS AND FUNCTIONS

/ꢒ ꢒ"!

Some teletext pages include hidden text (such as answers to

a quiz).

You can display the hidden text.

Each time you press the ꢆ button, text is hid-

den or revealed.

,ꢉ5ꢒ

You can double the height of the teletext display.

Press the ꢇ button.

)ꢊꢚꢒ6

You can return to the index page instantly.

Press ꢀ button.

FLOF (Fastext)/WST:

Returns to page 100 or a previously specified page.

List mode:

Returns to the page number displayed in the lower left area of

the screen.

ꢘ"ꢊ%ꢒ!

You can search for a teletext page while watching TV.

1 Press the Number button to enter a page

number, or press a Colour button.

The TV searches for a teletext page.

2 Press ꢁ button.

The TV programme appears. When the TV finds the

teletext page, its page number appears in the upper left

of the screen.

3 Press ꢁ button to return to a teletext

page when the page number is on the

screen.

Note:

• The TV mode cannot be resumed even by pressing

the

button. A TV programme is temporarily dis-

ꢉ

played instead of the teletext programme.

ꢅꢁ

ꢀꢁꢂꢃꢄꢅꢆꢁꢇ ꢈꢉꢅꢂ

This TV has a number of functions you can operate using

menus. To fully utilize all your TV’s functions, you need to un-

derstand the basic menu operating techniques fully.

4 Press

button to complete the set-

ꢀ

ting.

The menu disappears.

1 Press the

button to display the

MENU (main menu).

ꢀ

To return to the previous menu:

Press

(information) button.

ꢀ

The MENU (main menu) appears. In it, the titles of the

menus are displayed.

To exit a menu instantly:

Press the

button.

ꢁ

When the headphones are not connected to the TV:

When the headphones are connected to the TV:

Note:

• You cannot choose DIGITAL SURROUND and

HEADPHONE SURROUND on the MENU (main

menu) simultaneously. To display HEADPHONE

SURROUND on the MENU, connect the headphone

to the TV. To display DIGITAL SURROUND on the

MENU, disconnect the headphone from the TV.

2 ^{Press the}

buttons to choose a

^{menu title, and press the}ꢀ ^button.

ꢀ

The menu appears.

3 Operate the menus according to the

operation description of each function.

Note:

• For details, refer to the operation descriptions of

each function described for each menu which fol-

lows this “MENU OPERATION”.

• The display appearing at the bottom of a menu indi-

cates a button on the remote controller you can use

when you operate a chosen function.

ꢀꢁ

ꢆꢉꢊꢈꢃꢇꢁꢄꢋꢁꢈꢈꢉꢂꢌ

Note:

• You can change the HUE setting (picture hue) only

when the colour system is NTSC 3.58 or NTSC 4.43.

To return to the default settings in each TINT

mode:

Press the blue button.

Returns the picture settings in the currently chosen TINT

mode to the default settings, and stores them in the TINT

mode again.

To display the PICTURE SETTING menu:

1 Press the

button to display MENU

ꢀ

(main menu).

2 Press the ꢀ button to choose PICTURE

SETTING, and press the button.

3 Press the

tings.

button to complete the set-

ꢀ

The menu disappears.

■ ꢀꢁꢂꢀ

■ ꢐꢑꢒꢉꢓꢒꢔꢐ

When you set the ECO MODE function to ON, the screen

contrast is automatically adjusted to a setting suitable for the

brightness of your room. This reduces eye strain for you and

the power consumption of the TV.

You can select one of three TINT modes (three kinds of pic-

ture settings) to adjust the picture settings automatically.

1 Press the ꢀ buttons to choose TINT.

2 Press ꢁ buttons to choose a mode.

1 Press ꢀ buttons to choose ECO MODE.

COOL:

2 Press ꢁ buttons to choose ON.

A cool white colour base with a boost in the colour and

contrast levels that creates a more vivid picture.

To cancel the ECO MODE function:

Press ꢀ buttons to choose OFF.

WARM:

A warm orange/red colour base that creates the appro-

priate colour and contrast levels for watching films.

3 Press the

ting.

button to complete the set-

ꢀ

NORMAL:

The menu disappears.

A normal white colour base with normal colour and con-

trast levels.

Note:

• If you set the ECO MODE function to ON, the ECO lamp

lights.

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

■ ꢃꢄꢅꢆꢇ ꢈꢉꢊꢋꢌꢇꢍꢆꢎꢈꢏꢆ

You can change the picture settings of each TINT mode as

you like.

The picture settings changed are stored in the TINT mode.

1 Press the ꢀ buttons to choose an item.

2 Press the ꢁ buttons to change the set-

ting.

ꢂ

Item

ꢃ

Lower

Higher

CONTRAST

(picture contrast)

Darker

Softer

Brighter

Sharper

Deeper

BRIGHT

(picture brightness)

SHARP

(picture sharpness)

Lighter

Reddish

COLOUR

(picture colour)

Greenish

HUE

(picture hue)

ꢀꢂ

ꢆꢉꢊꢈꢃꢇꢁꢄꢍꢁ ꢈꢃꢇꢁꢋ

2 Press the ꢁ buttons to choose the ap-

propriate colour system.

PAL:

PAL system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43

NTSC 4.43 MHz system

AUTO:

To display the PICTURE FEATURES menu:

This function detects a colour system from the input sig-

nal. Only when you are viewing a picture from Pro-

gramme number PR 0 (AV), or EXT terminal, you can

choose using the AUTO function.

1 Press the

button to display MENU

ꢀ

(main menu).

2 Press the ꢀ button to choose PICTURE

FEATURES, and press the button.

ꢀ

3 Press the

ting.

button to complete the set-

ꢀ

■ ꢊꢕꢀꢒꢉꢖꢂꢗ

The menu disappears.

The AUTO VNR function optimally reduces noise of the TV

automatically according to the noise of the current picture.

The function also adjusts the optimum Sharpness (SHARP).

Note:

• The AUTO function may not function properly if you

have poor signal quality. If the picture is abnormal in

the AUTO function, choose another colour system

manually.

• When in the Programme numbers PR 0 (AV) to PR

99, you cannot choose NTSC 3.58 or NTSC 4.43.

1 Press the ꢀ buttons to choose AUTO

VNR.

2 Press the ꢁ buttons to choose AUTO.

MIN:

The AUTO VNR function is cancelled. When you set the

mode to AUTO but feel that the sharpness of the original

picture has not be reproduced fully, change the mode to

MIN. However, a noise remaining in the original picture

may be emphasized.

■ ꢛꢜꢝꢉꢊꢕꢀꢒꢉꢊꢙꢃꢐꢑꢀ

You can choose one of three ZOOM modes, REGULAR,

PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the nor-

mal picture (4:3 aspect ratio).

MAX:

This mode always maximizes the noise reduction effect

irrespective of state of the picture. When you set the

mode to AUTO but feel that the noise is remarkable,

change the mode to MAX. However, this may reduce the

sharpness of the picture.

ꢀ

1 Press the

buttons to choose 4:3 AUTO

button.

ASPECT. Then press the

The Sub-menu of the 4:3 AUTO ASPECT function ap-

pears.

ꢀ

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

■ ꢑꢒꢘꢒꢕꢗꢉꢙꢚꢙꢀꢐꢓ

The colour system is chosen automatically. However, if the

picture is not clear or no colour appears, choose the colour

system manually.

ꢀ

2 Press the

mode.

buttons to choose a ZOOM

ꢀ

1 Press the

buttons to choose COLOUR

button.

3 Press the

tings.

button to complete the set-

ꢀ

SYSTEM. Then press the

The Sub-menu of the COLOUR SYSTEM function ap-

pears.

ꢀ

The menu disappears.

ꢀꢃ

PICTURE FEATURES

■ ꢃꢁꢑꢀꢕꢗꢐꢉꢀꢁꢘꢀ

There are cases where the Earth’s magnetic force may make

the picture tilt. If this happens, you can correct the picture tilt.

ꢀ

1 Press the

buttons to choose PICTURE

button.

TILT. Then press the

ꢀ

The Sub-menu of the PICTURE TILT function appears.

ꢀ

2 Press the

comes level.

buttons until the picture be-

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

ꢀꢄ

ꢀꢁꢂꢃꢄꢅꢀꢆꢇꢇ ꢃꢈ

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

Note:

• When the DOLBY PRO LOGIC function or PRO

LOGIC 3D-PHONIC function is operating, the “BAL-

ANCE” item does not appears.

To display the SOUND SETTING menu:

■ ꢀꢒꢂꢌꢓꢂꢃ

You can turn off the sound from the TV speakers; but you

should only do this if an audio system is connected to the TV

as a substitute for the TV speakers. When you are using this

function, see “Setting the SPEAKER function” on page 34.

1 Press the

button to display MENU

ꢀ

(main menu).

2 Press the

button to choose SOUND

ꢀ

SETTING. Then press the

button.

ꢀ

When a sound is not issued from the TV speaker:

■ ꢀꢁꢂꢃꢂꢄꢅꢆꢅꢇ ꢇꢇ

If the SPEAKER function is set to OFF, the TV speaker does

not issue sound. Press the ꢄ buttons to choose the

SPEAKER. Then press ꢅ buttons to choose ON.

When you are viewing a bilingual broadcast programme, you

can choose the sound from Bilingual I (Sub I) or Bilingual II

(Sub II). When the stereo broadcasting is received poorly, you

can change from stereo to mono sound so that you can hear

the broadcast more clearly and easily.

Note:

• When the DOLBY PRO LOGIC function or PRO LOGIC

3D-PHONIC function is operating, the “SPEAKER” item

does not appears.

Press

buttons to choose STEREO / I • II.

buttons to choose a sound

ꢀ

2 Press

mode.

ꢁ

■ ꢔꢔꢂ

You can use the BBE function to enjoy easy-to-listen sound

that is faithful to the original sound recorded.

ꢀ : Stereo sound

ꢁ : mono sound

ꢂ : BIlingual I (sub I)

ꢃ : BIlingual (sub II)

1 Press ꢀ buttons to choose BBE.

2 Press ꢀ buttons to choose ON.

3 Press the

ting.

button to complete the set-

ꢀ

To cancel the BBE function:

Press ꢅ buttons to choose OFF.

The menu disappears.

3 Press the

ting.

button to complete the set-

ꢀ

Note:

• The sound mode you can choose differs depending

on the TV programme.

The menu disappears.

• This function does not work in the EXT modes. And

this function does not appear in the SOUND SET-

TING menu.

• Licensed by BBE Sound Inc. BBE is a registered trade-

mark of BBE Sound, Inc.

■ ꢒꢄꢕꢂꢃꢅꢔꢌꢀꢀ

You can use the POWER BASS function to enjoy richer and

fuller bass sound.

■ ꢀꢈꢉꢊꢋꢅꢌꢋꢍꢉꢎꢏꢐꢑꢊꢏ

You can adjust the sound to your liking.

1 Press the ꢀ buttons to choose an item.

Preparation:

The POWER BASS function is only displayed in the SOUND

SETTING menu when the BBE function is turned on. Turn the

BBE function on before using the POWER BASS function.

2 Press the ꢁ buttons to adjust it.

ꢂ

Item

BASS

ꢃ

Weaker

Left

Stronger

Right

1 Press ꢀ buttons to choose POWER

TREBLE

BALANCE

BASS.

2 Press ꢁ buttons to choose ON.

To cancel the POWER BASS function:

Press the ꢅ buttons to choose OFF.

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears

ꢀꢁ

ꢎꢉꢌꢉꢈ ꢏꢄꢋꢃꢇꢇꢅꢃꢂꢎ

Change the setting of the PRO LOGIC

3D-PHONIC function

1. Press the ꢀ buttons to choose

PRO LOGIC 3D-PHONIC. Then press the ꢃ

button.

The Sub-menu of the PRO LOGIC 3D-PHONIC function

appears.

To display DIGITAL SURROUND:

1 Press the

button to display MENU

_{(main menu}ꢀ_).

2 Press the ∞/5 button to choose DIGITAL

^{SURROUND. Then press the}ꢀ ^button.

Note:

• Connecting the headphones to the TV automatically

changes to the HEADPHONE SURROUND function cor-

responding to the current DIGITAL SURROUND function.

However, the PRO LOGIC 3D-PHONIC function and

DOLBY PRO LOGIC function are changed over to the 3D

HEADPHONE function so that the headphones cannot

play back the Dolby Pro Logic Surround sound properly.

2. Press the ꢀ buttons to choose an item.

Then press the ꢁ buttons to change the

setting.

MODE:

The PRO LOGIC 3D-PHONIC function has three

modes; NORMAL, CINEMA/SPORT, and MUSIC. You

can choose and set a mode as you like.

■ ꢃꢗꢒꢉꢘꢒ&ꢁꢑꢉꢝꢔ'ꢃ(ꢒꢂꢁꢑ

ꢉ ꢀꢁꢂꢃꢄꢅꢆꢇ ꢂꢆꢈꢂꢉꢊꢋꢆꢌꢁꢍꢇꢎꢏꢐꢑꢒꢓ

The PRO LOGIC 3D-PHONIC function lets you enjoy the at-

mosphere of Dolby Pro Logic surround sound without addi-

tional surround speakers.

LEVEL:

You can control the effect level of the PRO LOGIC 3D-

PHONIC function as you like.

LEFT/CENTRE/RIGHT:

With the PRO LOGIC 3D-PHONIC function, you can use the

rear surround-channel signal of the Dolby Surround encoded

programme to create the surround sound image as if sur-

round speakers were located at your right and left.

You can adjust the sound level of each speaker sepa-

rately. LEFT/RIGHT denotes left and right of the Front

speakers and CENTRE denotes the Centre speaker.

3. Press the

ting.

button to complete the set-

ꢀ

Use the PRO LOGIC 3D-PHONIC func-

tion

The menu disappears.

1 Press ꢀ buttons to choose PRO LOGIC

Note:

3D-PHONIC.

• To change the TV speaker setting, you should con-

nect an audio system to the TV. For details, see

“Connecting Speakers/Amplifier” on page 37.

To cancel the PRO LOGIC 3D-PHONIC function:

Press the ꢀ buttons to choose SURROUND OFF.

• When an audio system is not connected to your TV,

please be sure to leave the TV SPEAKER setting to

L/C/R. If it is neglected, a normal sound will not

come out from the TV speakers. If the TV SPEAKER

is not set to L/C/R, press the ꢁ buttons to choose

TV SPEAKER and press the ꢂ buttons to choose

L/C/R again.

2 Press the

tings.

button to complete the set-

ꢀ

The menu disappears.

Note:

• The PRO LOGIC 3D-PHONIC function does not work

properly except for the Dolby Surround encoded

programmes.

• The 3D lamp lights while the PRO LOGIC 3D-PHON-

IC function is operating.

• You can turn on or off the PRO LOGIC 3D-PHONIC

function by a single press. For details, see “4 3D

Button” on page 12.

ꢅꢀ

DIGITAL SURROUND

■ ꢔꢒꢘ$ꢚꢉꢃꢗꢒꢉꢘꢒ&ꢁꢑ

You can enjoy Dolby Pro Logic* surround sound with addi-

tional surround speakers.

^{2 Press the}ꢀ ^{button to complete the set-}

ting.

Preparation:

The menu disappears.

• Before using the DOLBY PRO LOGIC function, first connect

the surround speakers to the TV, then set the items in the

DOLBY PRO LOGIC function properly. For details, see

“Connecting Speakers/Amplifier” on page 37.

Note:

• The above function does not work properly for the

Dolby Surround encoded programmes.

1 Press the ꢀ buttons to choose DOLBY

PRO LOGIC.

To cancel the DOLBY PRO LOGIC function:

Press the ꢀ buttons to choose SURROUND OFF.

^{2 Press the}ꢀ ^{button to complete the set-}

ting.

The menu disappears.

Note:

• The DOLBY PRO LOGIC function will not work cor-

rectly unless you connect additional surround

speakers.

• The DOLBY PRO LOGIC function is only available

for Dolby Surround encoded programmes.

• Even if you do not have surround speakers, the PRO

LOGIC 3D-PHONIC function lets you enjoy the at-

mosphere of Dolby Pro Logic surround sound. For

details, see “PRO LOGIC 3D-PHONIC” on page 21.

* Manufactured under license from Dolby Laboratories

Licensing Corporation. “DOLBY”, the double-D symbol

and “PRO LOGIC” are trademarks of Dolby Laborato-

ries Licensing Corporation.

■ ꢒꢆ)ꢈ ꢉꢍꢇ "ꢇꢏꢋꢉ*ꢇꢏꢅꢆꢄ"ꢏꢍ

You can enjoy enhanced sound with one of the following four

surround functions:

DANCE CLUB:

This function creates a dance club atmosphere. It does not

work properly for the mono sound.

CONCERT HALL:

This function creates a concert hall atmosphere. It does not

work properly for the mono sound.

STADIUM:

This function creates a stadium atmosphere. It does not work

properly for the mono sound.

HYPER SOUND:

This function enhances mono sound to create a stereo sound

feel. It does not work properly for the stereo sound.

1 Press the ꢀ buttons to choose a func-

tion.

To cancel the function:

Press the ꢀ buttons to choose SURROUND OFF.

ꢅꢅ

button.

ꢐꢁ ꢎꢆꢐꢅꢂꢁꢄꢋꢃꢇꢇꢅꢃꢂꢎ

■ ꢒꢆ)ꢈ ꢉꢍꢇ "ꢇꢏꢋꢉ*ꢇꢏꢅꢆꢄ"ꢏꢍ

You can enjoy enhanced sounds while using headphones

with one of the following four surround functions:

DANCE CLUB:

This function creates a dance club atmosphere. It does not

work properly for the mono sound.

CONCERT HALL:

This function creates a concert hall atmosphere. It does not

work properly for the mono sound.

Preparation:

STADIUM:

• Before using a function in the HEADPHONE SURROUND

menu, please be sure to connect the headphones to your

TV. If the headphones are not connected to the TV, the DIG-

ITAL SURROUND function becomes active instead of the

HEADPHONE SURROUND function.

This function creates a stadium atmosphere. It does not work

properly for the mono sound.

HYPER SOUND:

This function enhances mono sounds to create a stereo

sound feel. It does not work properly for the stereo sound.

To display the HEADPHONE SURROUND menu:

1 Press the

button to display MENU

_{(main menu}ꢀ_).

1. Press the the ꢀ buttons to choose a

function.

2 Press the ꢀ button to choose HEAD-

^{PHONE SURROUND. Then press the}ꢀ

To cancel the function:

Press the ꢁ buttons to choose SURROUND OFF.

^{2. Press the}ꢀ ^{button to complete the set-}

tings.

Note:

• Disconnecting the headphones from the TV auto-

matically changes to the DIGITAL SURROUND

function corresponding to the current HEADPHONE

SURROUND function. However, the 3D HEAD-

PHONE function is changed over to either the PRO

LOGIC 3D-PHONIC function or DOLBY PRO LOGIC

function, depending on the state at that time.

The menu disappears.

Note:

• The above function does not work properly for the

Dolby Surround encoded programmes.

■ ꢝꢔꢉ(ꢐꢊꢔꢃ(ꢒꢂꢐ

The 3D HEADPHONE function produces 3D surround effects

that are heard through headphones, but should be more nat-

urally localised, as if they were coming out of separate front

speakers.

1. Press the ꢀ buttons to choose 3D HEAD-

PHONE.

To cancel the 3D HEADPHONE function:

Press the ꢁ buttons to choose SURROUND OFF.

^{2. Press the}ꢀ ^{button to complete the set-}

ting.

The menu disappears.

Note:

• You can turn on or off the 3D HEADPHONE function

with a single press. For details, see “4 3D Button”

on page 12.

• The 3D HEADPHONE function does not work prop-

erly for the mono sound.

• The 3D HEADPHONE function cannot help play

back a Dolby Pro Logic Surround sound correctly.

ꢅꢆ

ꢁꢑꢈꢄꢋꢁꢈꢈꢉꢂꢌ

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

Note:

• The EXT-1 terminal does not support S-VIDEO signal

(Y/C signal) and you cannot set ꢃ (S-VIDEO input)

in the EXT-1 terminal.

• Setting ꢃ (S-VIDEO input) changes the head

character from “E” to “S”. For example, “E2” is

changed to “S2”.

To display EXT SETTING menu:

•

Even an device which enables the S-VIDEO signal (Y/

C signal) to be output may output a regular video sig-

nal (composite signal) depending on the device set-

ting. If a picture cannot appear because ꢃ (S-

VIDEO input) setting has been made, read the device

Instruction Manual carefully again to check for the de-

vice settings.

1 Press the

button to display MENU

ꢀ

(main menu).

2 Press the ꢀ button to choose EXT SET-

TING. Then press the button.

ꢀ

■ ꢁ+ꢙ'ꢖꢁꢔꢐꢒꢉꢄꢏ,ꢇꢆ-

When connecting a device (such as S-VHS VCR) which en-

ables an S-VIDEO signal (Y/C signal) to be output, you can

enjoy high-quality picture of the S-VIDEO signal (Y/C signal).

■ ꢘꢁꢙꢀ

You can have a name corresponding to the devices connect-

ed for each EXT terminal. Giving a name to an EXT terminal

makes the EXT terminal number appear on the screen, to-

gether with the name.

Preparation:

• At first, read the Device Instruction Manual and “ADDITION-

AL PREPARATION” on page 36 to connect the device to the

TV properly. Second, follow the Device Instruction Manual

to set the device so that a S-VIDEO signal (Y/C signal) can

be output to the TV.

1 Press the ꢀ buttons or ꢁ buttons to

choose an EXT terminal.

• Do not set ꢃ (S-VIDEO input) to the EXT terminal con-

nected to a device which cannot output a S-VIDEO (Y/C sig-

nal). If it is set wrongly, a picture cannot appear.

EXT-1

1 Press the

buttons or

buttons to

ꢀ

ꢁ

EXT-3

choose an EXT terminal.

EXT-2

EXT-4

EXT-1

EXT-3

2 Press the blue button to display the name

list (LIST).

EXT-2

EXT-4

2 Press the yellow button and set the ꢂ

(S-VIDEO input).

A ꢃ (S-VIDEO input) mark is displayed. You can view

an S-VIDEO signal (Y/C signal) instead of the regular

video signal (composite signal).

To cancel the ꢄ (S-VIDEO input) setting:

Press the yellow button and turn off ꢃ (S-VIDEO in-

put) mark.

The regular video signal (composite signal) pictures are

resumed.

ꢅ

EXT SETTING

3 Press the ꢀ buttons to choose a name.

Then press the button.

ꢀ

The LIST disappears and the name is assigned to the

EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

4 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

Note:

• You cannot assign an EXT terminal name not found

in the name list (LIST).

■ ꢔꢕ$$ꢁꢂ&

You can choose a signal source to be output from an EXT-2

terminal.

You can choose any one of the output signal of the device

connected to the EXT terminal and the picture and sound

from a TV channel you are currently viewing to output it to the

EXT-2 terminal.

1 Press the ꢁ buttons to choose the EXT-2

terminal.

2 Press the ꢀ buttons to choose an EXT

terminal or TV.

The arrow in the menu represents a signal flow. The left

side of the arrow denotes a signal source output from the

EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT ter-

minal passes through the TV and is output from the EXT-

2 terminal.

TV:

The picture and sound of the TV channel you are cur-

rently viewing are output from the EXT-2 terminal.

3 Press the

ting.

button to complete the set-

ꢀ

The menu disappears.

Note:

• During dubbing, you cannot turn off the TV. Turning

off the TV also turns off the output from the EXT-2 ter-

minal.

• When you choose an EXT terminal as an output, you

can view a TV programme or a picture from the other

EXT terminal while dubbing the picture from a de-

vice connected to the EXT terminal onto a VCR con-

nected to the EXT-2 terminal.

• The RGB signals from the TV games cannot be out-

put.Teletext programmes cannot be output.

ꢅꢇ

ꢍꢁ ꢈꢃꢇꢁꢋ

■ $ꢘꢕꢐꢉ$ꢊꢑ#

You can set the TV to automatically change to a blue screen

and mute the sound if the signal is weak or absent, or when

there is no input from an external device.

1 Press the ꢀ buttons to choose BLUE

BACK.

2 Press theꢁ buttons to choose ON.

To display the FEATURES menu:

1 Press the

button to display MENU

To cancel the BLUE BACK function:

Press theꢀ buttons to choose OFF.

ꢀ

(main menu).

2 Press theꢀ button to choose FEATURES.

3 Press the

ting.

button to complete the set-

ꢀ

Then press the

button.

ꢀ

The menu disappears.

■ ꢙꢘꢐꢐꢃꢉꢀꢁꢓꢐꢗ

You can set the TV to automatically turn off after a specified

period of time.

■ ꢑ(ꢁꢘꢔꢉꢘꢒꢑ#

When there is a TV channel you wish your children not to

watch, you can use the CHILD LOCK function to lock out the

TV channel. Even when a child chooses a Programme num-

ber (PR) in which a locked TV channel has been registered,

1 Press the

buttons to choose SLEEP

ꢀ

TIMER. Then press the

A Sub-menu of the SLEEP TIMER function appears.

button.

ꢀ

the screen will change to blue and displays (CHILD LOCK)

ꢅ

so the TV channel cannot be viewed. Unless you enter a pre-

set ID number by a special operation, the lock cannot be re-

leased and the child cannot view the TV channel programs.

ꢈꢉꢊꢋꢌꢍꢊꢍꢎꢌꢊꢏꢐꢑꢒꢓꢊꢒꢔꢏꢕꢊꢖꢗꢘꢙꢍꢚꢉꢘ

1 Press the ꢀ buttons to choose CHILD

LOCK. Then press theꢄ button.

“SET ID NO.” (ID number setting screen) appears.

2 Press the

time.

buttons to set the period of

ꢁ

You can set the period of time a maximum of 120 min-

utes (2 hours) in 10 minute increments.

To cancel the SLEEP TIMER function:

Press the button to set a period of time to “OFF.”

2 Set the ID number to your liking.

3 Press the

tings.

button to complete the set-

ꢀ

1 Press theꢀ buttons to choose a number.

2 Press theꢁ buttons to move the cursor.

The menu disappears.

Note:

3 Press the

button.

ꢀ

• The SLEEP TIMER lamp lights while the SLEEP TIM-

ER function is operating.

The Sub-menu of CHILD LOCK appears.

• One minute before the SLEEP TIMER function turns

off the TV, “GOOD NIGHT!” appears.

• The SLEEP TIMER function cannot be used to turn

off the TV’s main power.

• When the SLEEP TIMER function is on, you can dis-

play the Sub-menu of the SLEEP TIMER function

again to confirm and/or change the remaining peri-

od of time of the SLEEP TIMER function. Press the

button to exit the menu after confirming and / or

ꢃ

changing the remaining time.

ꢅꢁ

FEATURES

4 Press theꢀ buttons to choose a TV

Note:

channel.

• Even if you reset the lock temporarily, it does not

mean that the CHILD LOCK function set for the TV

channel is cancelled. The next time anyone at-

tempts to view the TV channel, it will be locked

again.

Every time you press the ꢁ buttons, the Programme

number (PR) changes, and the picture of the TV channel

registered in the Programme number (PR) is displayed

on the screen.

• When you would like to cancel the CHILD LOCK

function, you must perform the operation “To set the

CHILD LOCK function” again.

• To disable easy choosing of a Programme number

(PR) in which a locked TV channel has been regis-

tered, the Programme number (PR) has been set

5 Press the blue button and set the CHILD

LOCK function.

(CHILD LOCK) appears and the TV channel is locked.

ꢅ

To reset the CHILD LOCK function:

that it cannot be chosen by the

operation buttons at the TV.

buttons or the

ꢁ

Press the blue button again.

(CHILD LOCK) disappears.

ꢅ

• To disable easy resetting of the lock, “ID NO.” (ID

No. input screen) is set so that it cannot appear un-

6 Press the

ting.

button to complete the set-

less you press the

(Information) button.

ꢀ

The menu disappears.

■ ꢔꢐꢑꢒꢔꢐꢗꢉ+ꢐ.ꢀ'/-

Only when connecting a Decoder with a T-V LINK compatible

VCR connected to the EXT-2 terminal, you can use this func-

tion. To operate this function, see “Using the DECODER

(EXT-2) function” on page 33.

Note:

• To disable easy resetting of the CHILD LOCK func-

tion, the menu disappears by choosing the CHILD

LOCK function and pressing the

ordinary menu operation.

button as in the

ꢆ

Caution:

• If you have not connected a Decoder with a T-V LINK com-

patible VCR connected to the EXT-2 terminal, setting this

function to “ON” by mistake causes the picture/sound of a

TV channel you are currently viewing not to be issued.

ꢈꢉꢊꢛꢚꢌꢜꢊ ꢊ!ꢉꢙ"ꢌ#ꢊꢈ$ꢊꢙꢎ ꢘꢘꢌ!

1 Choose a Programme number (PR) in

which a TV channel locked with the

Number buttons or PR LIST.

The screen changes to blue and the (CHILD LOCK)

ꢅ

appears. You cannot view the TV channel.

2 Press the

(Information) button to

ꢆ

display “ID NO.” (ID No. input screen).

3 Press the Number buttons to enter the ID

number.

The lock is temporarily released so you can view the TV

channel.

If you have forgotten the ID number:

Perform step 1 of “To set the CHILD LOCK function”. Af-

ter confirming the ID number, press the

the menu.

button to exit

ꢇ

ꢅꢂ

ꢀꢁꢂꢃꢄꢅꢅ

To cancel the AUTO PROGRAM function:

Press the button.

To display the INSTALL menu:

ꢁ

1 Press the

button to display MENU

3 After the TV channels have been regis-

tered in the Programme numbers (PR), the

EDIT menu appears.

ꢀ

(main menu).

2 Press the

button to choosetheINSTALL

ꢀ

menu. Then press the

button.

ꢀ

You can proceed to edit the Programme numbers (PR)

using the EDIT/MANUAL function. For details, see “ED-

IT/MANUAL” on page 29.

■ ꢀꢁꢂꢃꢄꢁꢃꢅ

You can choose the language you want to use for the on-

screen display from the language list in a menu.

When not using the EDIT/MANUAL function:

If you do not need to use the EDIT/MANUAL function, go

to the next step.

1 Press the

buttons to choose LAN-

ꢀ

4 Press the

menu.

button to display the T-V LINK

ꢀ

GUAGE. Then press the ꢀ button.

A sub-menu of the LANGUAGE function appears.

5 Operate the T-V LINK menu according to

the type of VCR connected to the EXT-2

terminal.

When a T-V LINK compatible VCR is not con-

nected:

2 Press the

guage.

buttons to choose a lan-

ꢀ

Press the

button to exit the T-V LINK menu.

ꢁ

The T-V LINK menu disappears, and all the settings are

completed.

3 Press the

ting.

button to complete the set-

ꢀ

When a T-V LINK compatible VCR is connected:

The menu disappears.

Follow the operating procedure “Downloading the data

to VCR” on page 33 to transmit the Programme number

(PR) data to the VCR.

■ ꢁꢄꢆꢇ ꢈꢉꢇꢃꢉꢁꢊ

You can automatically register the TV channels which can be

received well at your residence in the TV’s Programme num-

bers (PR) by performing the following.

Note:

• To receive SKY 1 a satelite tuner is needed. You

must have the satelite tuner set to SKY 1 before

starting the AUTO PROGRAM function.

• If a TV channel you want to view is not set to a Pro-

gramme number (PR), manually set it using the

MANUAL function. For details, see “EDIT/MANUAL”

on page 29.

1 Press the

buttons to choose AUTO

ꢀ

PROGRAM.

2 Press the

button to start the AUTO

ꢀ

• The TV channel is not registered in Programme

number PR 0 (AV). When you want to register a TV

channel to PR 0 (AV) manually set it using the MAN-

UAL function. For details, see “EDIT/MANUAL” on

page 29.

PROGRAM function.

The AUTO PROGRAM menu appears and received TV

channels are automatically registered in the Programme

numbers (PR).

• In some areas TV reception is possible from more

than one transmitter, e.g. different ITV regions. In

this case each TV channel may be set twice. If this

happens the first set of channels will have the

stronger signal. If you want to delete the second set

of channels, you will have to do it manually, see

page 31.

ꢀꢁ

1 Press the

channel.

buttons to choose a TV

2 Press the

tion.

button to start the MOVE func-

3 Press the

buttons to choose a new

1 Press the

buttons to choose EDIT/

button.

INSTALL

2 Follow the operation description of a func-

tion you want to use and operate the func-

tion.

■ ꢅꢋꢌꢆꢍꢊꢁꢂꢄꢁꢀ

The EDIT/MANUAL functions are divided into two types: ed-

iting of the current Programme numbers (PR) (EDIT func-

tions) and manual registration of a TV channel you want to

view to the Programme number (PR) (MANUAL function).

The details about these functions are as follows:

3 Press the

tings.

button to complete the set-

ꢀ

The T-V LINK menu appears.

MOVE:

This function changes a Programme number (PR) of a TV

channel.

ID:

This function registers a Channel name (ID) to a TV channel.

INSERT:

This function adds a new TV channel in the current Pro-

gramme numbers (PR) list by using the CH number.

4 Operate the T-V LINK menu according to

the type of VCR connected to the EXT-2

terminal.

DELETE:

This function deletes a unnecessary TV channel.

When a T-V LINK compatible VCR is not con-

nected:

MANUAL:

This function manually registers a new TV channel in a Pro-

gramme number (PR).

Press the

button to exit the T-V LINK menu.

ꢁ

The T-V LINK menu disappears and all the settings are

completed.

Caution:

When a T-V LINK compatible VCR is connected:

• Using the MOVE, DELETE or INSERT function rewrites the

current Programme numbers (PR) list. Resultingly, the Pro-

gramme number (PR) of some of the TV channels will

change.

Follow the operating procedure “Downloading the data

to VCR” on page 33 to transmit the Programme number

(PR) data to the VCR.

• Using the MANUAL function for a TV channel for which the

CHILD LOCK function has been set cancels the CHILD

LOCK function for the TV channel.

ꢃꢄꢅꢆ

ꢀ

• Using the MANUAL function for a TV channel for which the

DECODER (EXT-2) function has been set to ON returns the

setting of the DECODER (EXT-2) function for the TV chan-

nel to OFF.

ꢀ

Every time you press the

buttons, the Programme

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

• When a TV channel has already been registered in PR 99,

using the INSERT function deletes the TV channel.

ꢁ

Note:

• For Programme number PR 0, “AV” appears in the Pro-

gramme numbers (PR) list.

• An EXT terminal number does not appear in the Pro-

gramme numbers (PR) list.

• The CH number is a number unique to the TV and corre-

sponding to the Channel number of a TV channel. For the

relationship of a Channel number and a CH number, see

“CH NUMBER” on page 31.

• You cannot use the INSERT function if you do not know a

Channel number of a TV channel. Use the MANUAL func-

tion to register a TV channel in the Programme number

(PR).

ꢀ

Programme number (PR).

ꢀ

MANUAL. Then press the

ꢀ

To cancel the MOVE function:

Press the (Information) button.

ꢂ

ꢀꢂ

go to step 4, but press the

buttons to move the

cursor and the

buttons to choose a character for

1 Press the

channel.

buttons to choose a TV

Every time you press the

buttons, the Programme

1 Press the

buttons to choose a Pro-

3 Press the

buttons to choose the first

5 Press the

buttons to choose the Chan-

4 Press the

button to change the Pro-

INSTALL

ꢃ

Note:

gramme number (PR) of a TV channel to a

new Programme number (PR).

• You can register your unique Channel name (ID) to

the TV channel. When step 3 is completed, do not

ꢁ

ꢈꢉ

ꢀ

completing the Channel name (ID). Then press the

ꢀ

button to register the Channel name (ID) to the TV

ꢀ

channel.

ꢀ

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

ꢈꢊꢋꢆꢌꢍ

Preparation:

• A CH number unique to this TV and corresponding to the

Channel number of a TV channel is required. Find the cor-

responding CH number from a table “CH NUMBER” on

page 31 based on the Channel number of the TV channel.

2 Press the red button to start the ID func-

tion.

ꢀ

gramme number (PR) for which you will

2 Press the green button and start the IN-

SERT function.

ꢀ

character of a Channel name (ID) you want

to attach to the TV channel.

To cancel the INSERT function:

Press the

(Information) button.

ꢁ

3 Press the Number buttons to enter the re-

maining CH number.

The TV shifts to registration mode.

When the registration is completed, the picture of the TV

channel appears on the screen.

4 Press the blue button to display the ID LIST

(channel name list).

Note:

• The CH number is a number indicating the broad-

cast frequency to the TV. If the TV cannot detect the

TV channel corresponding to the broadcast fre-

quency indicated by the CH number, a picture in the

no-signal state appears.

ꢀ

nel name (ID).

To cancel the ID function:

Press the (Information) button.

ꢂ

6 Press the

button to register a Channel

ꢀ

name (ID) to a TV channel.

ꢇ

1 Press the

buttons to choose a Pro-

INSTALL

ꢉꢆꢏꢆꢍꢆ

■ ꢎꢏ ꢂꢄꢊꢐꢅꢉ

1 Press the ꢂ buttons to choose a TV

• When you want to use the INSERT function on page 30,

find the CH number corresponding to the Channel number

of the TV channel from this table.

channel.

Every time you press the ꢀ buttons, the Programme

number (PR) is changed over, and the picture of the TV

channel registered in the Programme number (PR) ap-

pears on the screen.

Channel

E21

E22

E23

E24

E25

E26

E27

E28

E29

E30

E31

E32

E33

E34

E35

E36

E37

E38

E39

E40

E41

E42

E43

E44

E45

Channel

E46

E47

E48

E49

E50

E51

E52

E53

E54

E55

E56

E57

E58

E59

E60

E61

E62

E63

E64

E65

E66

E67

E68

E69

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

CH 30

CH 31

CH 32

CH 33

CH 34

CH 35

CH 36

CH 37

CH 38

CH 39

CH 40

CH 41

CH 42

CH 43

CH 44

CH 45

CH 46

CH 47

CH 48

CH 49

CH 50

CH 51

CH 52

CH 53

CH 54

CH 55

CH 56

CH 57

CH 58

CH 59

CH 60

CH 61

CH 62

CH 63

CH 64

CH 65

CH 66

CH 67

CH 68

CH 69

2 Press the yellow button to delete the TV

channel.

The TV channel is deleted from the Programme num-

bers (PR) list.

ꢃꢐꢊꢑꢐꢏ

ꢀ

gramme number (PR) to which you want to

2 Press the blue button to activate the MAN-

UAL function.

To cancel the MANUAL function:

Press the

(Information) button.

ꢁ

3 Press the green or red button to search for

a TV channel.

Scanning stops when the TV finds a TV channel. Then

the TV channel is displayed.

4 Press the green or red button repeatedly

until the TV channel you want appears.

If the TV channel reception is poor:

Press the blue or yellow button to fine-tune the TV chan-

nel.

5 Press the

button and register the TV

ꢀ

channel to a Programme number (PR).

The normal EDIT menu is resumed.

ꢇꢎ

ꢆꢇ ꢈ

To display the DEMO menu:

1 Press the

button to display MENU

ꢀ

(main menu).

2 Press theꢀ button to choose DEMO. Then

press the

button.

ꢀ

The DEMO function automatically demonstrates some of the

TV functions.

1 Press the ꢀ buttons to choose ON.

2 Press the

tings.

button to complete the set-

ꢀ

The DEMO function is set to ON, and the demonstration

will start.

To stop the demonstration:

Press one of the buttons on the remote control.

When the DEMO function is set to ON:

Each time the TV is turned on, the demonstration starts

automatically. If you do not want that to happen, perform

the following operations to cancel the DEMO function:

1 Display the DEMO menu again.

2 Press the ꢀ buttons to choose OFF.

3 Press the

function.

button to cancel the DEMO

ꢀ

ꢇꢀ

ꢄꢆꢆꢀꢃꢀꢈꢁꢄꢅꢉ ꢇꢁꢊꢉꢈꢋꢇꢌꢄꢃꢀꢈꢁꢂ

4 Press the

buttons to choose FEA-

ꢀ

■ ꢋꢑꢒꢓꢔꢑꢕꢖꢗꢓꢘ ꢙꢚꢛ ꢖꢕꢙꢕ ꢙꢑ ꢜꢎꢉ

You can transmit to the latest Programme numbers (PR) data

to the VCR with the T-V LINK function.

TURES. Then press the

button.

ꢀ

The FEATURES menu appears.

Caution:

• Only when the T-V LINK compatible VCR is connected to

the EXT-2 terminal, this operation is enabled.

• Only when the T-V LINK menu is being displayed, this oper-

ation is enabled.

5 Press the

buttons to choose DECOD-

ꢀ

ER (EXT-2) . Then press the

choose ON.

buttons to

ꢂ

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the

buttons to choose OFF.

ꢂ

1 Turn on the VCR.

6 Press the

ting.

button to complete the set-

ꢀ

2 Press the

button.

ꢀ

The data transmission begins.

The T-V LINK menu appears.

The T-V LINK menu disappears once the data transmis-

sion ends.

When the T-V LINK menu is changed over to

another menu:

The menu operation at the TV side is completed and it is

shifted to the menu operation at the VCR side. Refer to

the VCR Instruction Manual and operate the VCR.

7 Follow the operating procedure “Down-

loading the data to VCR” on page 33 to

transmit the Programme number (PR) data

to the VCR.

Note:

• If “FEATURE NOT AVAILABLE” appears at the T-V

LINK menu, ensure the following three items are cor-

rect; then press the

sion.

button to retry data transmis-

ꢁ

8 If you have another TV channel capable of

being unscrambled with a Decoder, repeat

steps 2 through 7.

− Has the T-V LINK compatible VCR been connect-

ed to the EXT-2 terminal?

− Has the VCR power been turned on?

Note:

− Does the SCART cable that is connected to the

EXT-2 terminal to T-V LINK compatible VCR have

all proper connections?

• If for some reason the DECODER (EXT-2) function

has been set to “ON” but the TV channel cannot be

unscrambled, check the following:

− Has the Decoder been connected to the VCR

properly according to the VCR and Decoder In-

struction Manuals?

■ ꢄꢝꢗꢓꢘ ꢙꢚꢛ ꢋꢅꢎꢇꢋꢅꢉ ꢅ!ꢆ"#$

− Has the Decoder power been turned on?

%&ꢓ'ꢙꢗꢑꢓ

When connecting a Decoder with a T-V LINK compatible VCR

connected to the EXT-2 terminal, use the DECODER (EXT-2)

function to unscramble the scrambled TV channels.

−

Can the TV channel be unscrambled with a De-

coder?

− Is it necessary to change the VCR settings in or-

der to connect the Decoder? Confirm that the

VCR is set properly by rechecking the VCR In-

struction Manual.

1 Turn on the Decoder power.

2 Display the TV channel capable of being

unscrambled with the Decoder on the TV.

Even if the Decoder is functioning, a scrambled picture

appears at this time.

3 Press the

button to display the MENU.

ꢀ

The MENU (main menu) appears.

ꢇꢇ

ADDITIONAL MENU OPERATIONS

■ ꢀꢁꢁꢂꢃꢂꢄꢅꢆꢇ ꢈꢄꢉꢅꢁ ꢊꢋꢃꢃꢂꢅꢌꢊ

Follow “Connecting Speakers/Amplifier” on page 37 to con-

nect the speakers and amplifier, then set the functions de-

pending on the connection states.

■ ꢈꢋꢃꢃꢂꢅꢌ ꢃꢍꢋ ꢎꢑꢔ ꢕꢔꢖꢗꢘ ꢙꢚꢛ

ꢎꢜꢔꢝꢗꢘ ꢒꢉꢅꢓꢃꢂꢄꢅ

When the PRO LOGIC 3D-PHONIC function is operating, the

front speakers and TV speakers are used simultaneously.

The TV speakers take the role of a centre speaker. It makes

spoken dialogues more vivid and easier to listen to.

When connecting an Audio system (Front speakers/Am-

plifier):

Perform the “Setting the SPEAKER function” and “Setting the

PRO LOGIC 3D-PHONIC function”.

Preparation:

• If you have had the headphones connected to your TV set,

disconnect them.

When connecting Surround speakers:

Perform the “Setting the DOLBY PRO LOGIC function”.

1. Press the

button to display the MENU

ꢀ

When connecting both an Audio system (Front speakers/

Amplifier) and Surround speakers:

(main menu).

Perform the “Setting the SPEAKER function” and “Setting the

DOLBY PRO LOGIC function”.

2. Press the

buttons to choose DIGITAL

ꢁ

SURROUND. Then press the

display the DIGITAL SURROUND menu.

button to

ꢀ

Note:

• The ꢀ buttons of the TV remote control and the ꢁ

(volume) buttons at the front panel of your TV set can be

used to control the volume of each speaker simultane-

ously.

• The settings of the TV speakers on each menu are relat-

ed, if you change one of them the others will change au-

tomatically.

3. Press the buttons to choose PRO

ꢁ

ꢂ

LOGIC 3D-PHONIC. Then press the but-

ton to display the sub-menu of PRO LOGIC

3D-PHONIC function.

• Setting the volume of the amplifier too high may damage

the front speakers.

■ ꢈꢋꢃꢃꢂꢅꢌ ꢃꢍꢋ ꢈꢎꢏꢀꢐꢏꢑ ꢒꢉꢅꢓꢃꢂꢄꢅ

Turn off the SPEAKER function so that TV speakers will not

issue any sound.

Preparation:

4. Press the

buttons to choose TV

ꢁ

Press the

button to choose “SURROUND OFF”, then turn

ꢀ

SPEAKER. Then press the

choose CENTRE.

buttons to

ꢀ

off the surround function.

1. Press the

button to display the MENU

OFF or L/C/R

ꢀ

OFF is used to cut sound from the TV speakers. L/C/R

is used to issue all the sound from the TV speakers.

(main menu).

2. Press the

buttons to choose SOUND

ꢁ

5. Press the

tings.

button to complete the set-

ꢀ

SETTING. Then press the

play the SOUND SETTING menu.

button to dis-

ꢀ

The menu disappears.

The SOUND SETTING menu appears.

Note:

• Use the Amplifier volume to control and set volume

of the Front speakers to the optimum for the TV

speakers.

• When the sound quality of the Audio system is pref-

erable to the TV’s speakers, you can set the TV

SPEAKER to OFF to cut the sound of the TV speak-

ers.

3. Press the

buttons to choose SPEAK-

ꢁ

ER. Then press the

OFF.

buttons to choose

ꢀ

The sound from the TV speakers is cut.

4. Press the

tings.

button to complete the set-

ꢀ

The menu disappears.

ꢀꢁ

ADDITIONAL MENU OPERATIONS

When setting MODE to PHANTOM:

ꢋꢓꢔꢔꢕꢖꢗꢘꢔꢙꢓꢘꢉꢄꢏꢚꢛꢘꢜꢌꢄꢘꢏꢄ ꢈ!ꢘ"#ꢖ$%

ꢔꢕ&ꢖ

Set the items in the sub-menu of the DOLBY PRO LOGIC

function properly, and use the test signal to control the vol-

ume level of the speakers so that you can listen to the sounds

from them uniformly. Be sure to perform this operation before

using the DOLBY PRO LOGIC function.

When using only Surround speakers, set TV SPEAKER

to L/R to disable the centre speaker of the TV speakers.

When using both an audio system and Surround speak-

ers, set TV SPEAKER to OFF so that none of the TV

speakers issue sound.

6. Press the

buttons to choose TEST

ꢂ

MODE. Then press the

choose ON.

Test signals are output alternately from each of the

speakers.

buttons to

ꢄ

Preparation:

• If you have had the headphones connected with your TV

set, disconnect them.

• Increase the sound volume of the TV speakers to a level at

which you ordinarily listen. If you do not do this before start-

ing the operation, it is impossible to control the volume from

within the function.

When you are using an Audio system, however, set the am-

plifier volume to zero to cut the Front speakers. Then pre-set

the TV sound volume level to about 10.

To make sounds issued from the Front speak-

ers of the Audio system:

Slowly increases the amplifier volume until the volume

from the Front speakers are approximately equal to that

from the TV speakers or Surround speakers.

7. Press the

buttons to control the sound

ꢄ

1. Press the

button to display the MENU

ꢀ

volumes of the speakers so that you can

listen the sounds at the same sound vol-

ume when you are located at the listening

position.

(main menu).

2. Press the

buttons to choose DIGITAL

ꢂ

SURROUND. Then press the

button to

ꢀ

display the DIGITAL SURROUND menu.

LEFT/CENTRE/RIGHT/SURROUND:

LEFT and RIGHT denote L and R of the Front speaker.

CENTRE refers to the centre speaker, and SURROUND

refers to surround speakers. In the PHANTOM mode,

the CENTRE is skipped.

3. Press the buttons to choose DOLBY

ꢂ

ꢃ

PRO LOGIC. Then press the button to

display the sub-menu of the DOLBY PRO

LOGIC function.

8. Press the

tings.

button to complete the set-

ꢀ

The menu disappears.

Note:

• For details about listening positions, see“Connect-

ing Speakers/Amplifier” on page 37.

• When you use both an audio system and the TV

speakers and they are not matched in sound quality,

you can change over the TV SPEAKER setting to

OFF to cut the TV speakers. In this case, however,

change over the MODE setting from NORMAL to

PHANTOM.

4. Press the

buttons to choose MODE,

ꢂ

then press the

NORMAL.

buttons to choose

ꢄ

PHANTOM:

This function lets you enjoy Dolby Surround sounds

without using the centre speaker. This TV incorporates a

centre speaker. It is recommended to use NORMAL in

every possible case.

5. Press the

buttons to choose TV

ꢂ

SPEAKER. Then press the

buttons to

ꢄ

choose the TV speaker setting.

When you are using only Surround speakers:

Set TV SPEAKER to L/C/R.

When you are using both an audio system and

Surround speakers:

Set TV SPEAKER to CENTRE. All the TV speakers act

as a centre speaker.

ꢇꢒ

ꢄꢆꢆꢀꢃꢀꢈꢁꢄꢅꢉꢋꢌꢇꢋꢄꢌꢄꢃꢀꢈꢁ

■ ꢎꢑꢓꢓꢛ'ꢙꢗꢓꢘ ꢙꢚꢛ ꢛ+ꢙꢛ,ꢓꢕꢔ ꢖꢛ-ꢗ'ꢛꢝ

Connect the devices to the TV, paying attention to the Rear

panel connections and the Front panel connections.

Before connecting anything:

• Read the manuals provided with the devices. Depending

on the devices, the connection method may differ from

the figure. In addition, the device settings may be

changed depending on the connection method to secure

proper operation.

(Behind the door)

• Turn off all the devices including the TV.

• The “SPECIFICATIONS” on the back cover contains the

details of the EXT terminals. If you are connecting a de-

vice not listed in the following connection diagram, see

the table to choose the best EXT terminal.

• Note that connecting cables are not supplied.

1 VCR (composite signal)

2 VCR (composite signal/S-VIDEO signal)

3 T-V LINK compatible VCR (composite signal/S-VIDEO sig-

nal)

4 Decoder

5 DVD player (composite signal/S-VIDEO signal)

6 DVD player (composite signal/RGB signal)

7 TV game (composite signal/RGB signal)

8 TV game (composite signal/S-VIDEO signal)

9 Headphones

0 Camcorder (composite signal/S-VIDEO signal)

- SCART cable

= Audio cable

AUDIO OUT

~ Video cable

EXT-2

EXT-3

! S-VIDEO cable

)

EXT-1

SURROUND

REAR

ꢉꢓ(ꢕ$ꢓ)ꢘ*ꢙꢕ$ꢙꢘ$+ꢖꢘ&#ꢔ,#ꢔꢘꢔꢙꢓꢘ

ꢋ%ꢅꢈꢉꢆꢄꢘ)ꢕꢗꢖ+-ꢘ.ꢛ/!ꢘ)ꢕꢗꢖ+-0ꢘ)#$ꢙꢘ+)

+ꢘꢋ%ꢅ1ꢋꢘꢅ!ꢌ

Connect the device to an EXT terminal other than the EXT-1

terminal.

You can choose a video input signal from the S-VIDEO signal

(Y/C signal) and regular video signal (composite signal). For

details of how to operate the device, see “ꢂ(S-VIDEO in-

put)” on page 24.

!&ꢖꢖꢓ$ꢔꢕꢖꢗꢘꢙꢓ+5,ꢙ&ꢖꢓ)

Connect the headphones with a stereo mini-jack (of 3.5mm in

diameter) to the headphone jack at the TV front panel.

Note:

• When you connect the headphones, the TV speakers is-

sue no sound.

ꢅꢕ5ꢓ&/)&#ꢖ5ꢘ)ꢕꢗꢖ+-ꢘ&#ꢔ,#ꢔꢘ"6&3ꢘꢔꢙꢓ

ꢆ7ꢍ%ꢀꢘꢔꢓ63ꢕꢖ+-

You can arbitrarily change over the output of the video/sound

signal from the EXT-2 terminal. It is useful when you want to

dub the video/sound from another device on the VCR con-

nected to the EXT-2 terminal. For details on how to do this op-

eration, see “DUBBING” on page 25.

ꢍ%ꢅꢘꢏꢈꢊ2ꢘ$&3,+ꢔꢕ4-ꢓꢘꢅ!ꢌ

Be sure to connect the T-V LINK compatible VCR to the EXT-

2 terminal. If not, the T-V LINK function will not work properly.

Note:

• When connecting a T-V LINK compatible VCR to the EXT-

2 terminal, be sure to connect the Decoder to the VCR. If

not, the T-V LINK function may not work properly. After

you have registered TV channels to the Programme num-

bers (PR), set the DECODER (EXT-2) function for the Pro-

gramme number (PR) to ON in order to unscramble a

scrambled TV channel. For details of operation, see “Us-

ing the DECODER (EXT-2) function” on page 33.

ꢍꢅꢘ&#ꢔ,#ꢔꢘ"6&3ꢘꢔꢙꢓꢘꢆ7ꢍ%ꢎꢘꢔꢓ63ꢕꢖ+-

The output of video/sound signal of a TV channel you are cur-

rently viewing is always output from the EXT-1 terminal.

Note:

• Changing over a Programme number (PR) also changes

over the TV output from the EXT-1 terminal.

• The video/sound signal from an EXT terminal cannot be

output.

• Teletext programmes cannot be output.

ꢇ'

ADDITIONAL PREPARATION

■ ꢎꢑꢓꢓꢛ'ꢙꢗꢓꢘ (.ꢛꢕ/ꢛ,ꢝꢍꢁ0.ꢔꢗ%ꢗꢛ,

While referring to the Audio equipment connection diagram,

connect the audio equipment you desire to the TV.

1 Amplifier

2 Front speakers (Magnetic-shielded type)

3 Surround speakers (Impedance 8 ohm type)

Before connecting anything:

• Read the manuals provided with the amplifier and speak-

ers.

• Turn the TV and Amplifier off.

• Use impedance 8-ohm type speakers for surround

speakers.

• To prevent magnetism from the speakers adversely ef-

fecting the TV screen, use magnetic-shielded speakers

for the front speakers.

• Note that connecting cables are not supplied.

Note:

• Pay attention to the positive ª and negative · polarities

when connecting the surround speakers to your TV.

(Terminals on rear)

• For the optimal effect, position the surround speakers at

least 1 metre above the heads of seated viewers.

• If you want to use your external Dolby Surround decoder,

connect it to the AUDIO OUT terminals. Then set all sur-

round functions of the TV to OFF.

• The output from the AUDIO OUT terminal is not interrupt-

ed by headphone connection to the TV.

ꢐ#5ꢕ&ꢘ+3,-ꢕ"ꢕꢓ6ꢘ+ꢖ5ꢘ96&ꢖꢔꢘ),ꢓ+:ꢓ6)

ꢜ&)ꢕꢔꢕ&ꢖꢕꢖꢗꢘꢔꢙꢓꢘ),ꢓ+:ꢓ6)

You can use external front speakers to listen to the TV sound

instead of the TV speakers. For details of how to operate

them, see “Setting the SPEAKER function” on page 34.

Also note that when you want to use the PRO LOGIC 3D-PHON-

IC function, you can set it to issue sound from both of the TV

speakers and external front speakers so that you can listen to

spoken dialogues more clearly and easily. For details, see “Set-

ting the PRO LOGIC 3D-PHONIC function” on page 34.

Note:

• You cannot cut the sound from the front speaker even if

you connect a headphone to the TV.

Approx.

45 degrees

ꢆ;ꢔꢓ6ꢖ+-ꢘ)#66&#ꢖ5ꢘ),ꢓ+:ꢓ6)

You can use external surround speakers to the TV so that you

can employ the “DOLBY PRO LOGIC” on page 22. Before us-

ing the DOLBY PRO LOGIC function, however, follow the de-

scription “Setting the DOLBY PRO LOGIC function” on

page 35 to set the DOLBY PRO LOGIC function properly.

ꢇ8

ꢀꢁꢂꢃꢄꢀꢀꢅꢆꢇꢂ ꢆꢈꢂꢉ ꢊꢀꢇ

■ ꢀꢁꢂꢃꢄꢅꢆꢇꢃ ꢈ

Push to open

(Behind the cover)

1 EXT-4 terminal

pages 24 and 36

pages 36

7 3D lamp

pages 12 and 21

page 17

2 Headphone jack (mini jack)

3 ꢀ (Volume) button

⁴^P∨^/∧ ^{buttons / –/+ buttons}

5 Remote control sensor

6 ECO sensor

8 ECO lamp

page 10

9 SLEEP TIMER lamp

0 Power lamp

page 26

page 10

pages 5 and 8

- Main power button

Caution:

• Do not grasp the TV by the front panel cover when moving the TV set. If you do, you may break the cover.

■ ꢉ ꢇꢁꢅꢆꢇꢃ ꢈ

AUDIO OUT

EXT-2

EXT-3

)

EXT-1

SURROUND

REAR

= ~ @

= SURROUND REAR terminal

~ AUDIO OUT terminal

! Aerial socket

page 37

page 4

@ EXT-1 terminal

# EXT-2 terminal

$ EXT-3 terminal

pages 4, 24 and 36

pages 4, 7, 24 and 36

pages 24 and 36

ꢀꢁ

ꢃꢌꢈꢊꢍꢅꢇꢂꢎꢈꢈꢃꢀꢁꢏ

If a problem arises while you are using the TV, please read this “Troubleshooting” well before you request having the TV repaired.

You may be able to fix it easily by yourself. For example, if the AC plug is disconnected from the AC outlet, or the TV aerial has

problems, you may think there is a problem with the TV itself.

Important:

• This Troubleshooting guide only covers problems whose cause are not easy to determine. If a question arise when you are

operating a function, read the page(s) corresponding to the operation of the function well, not this Troubleshooting guide.

• After you have followed the Troubleshooting description or the operating description of the functions concerned without any suc-

cess, remove the AC plug from the AC outlet and request a repair of your TV. Do not attempt to repair the TV by yourself or

remove the rear cover of the TV.

• When the TV channel reception is poor, it can be hard to

ꢈ"ꢘ<&#ꢘ$+ꢖꢖ&ꢔꢘꢔ#6ꢖꢘ&ꢖꢘꢔꢙꢓꢘꢍꢅ

• Is the AC plug connected to the AC outlet?

• Is the Power lamp lit? If not, press the Main power button.

hear the stereo or bilingual sound. In this case, follow the

description “STEREO / I•II” on page 20 to hear the sound

more easily by changing it to a mono sound.

ꢄ,ꢓ6+ꢔꢕ&ꢖꢘ5ꢕ)+4-ꢓ5

ꢊ&ꢘ,ꢕ$ꢔ#6ꢓ/ꢊ&ꢘ)&#ꢖ5

• Have the batteries of the remote control become exhaust-

ed? Follow the description “Putting Batteries into the Re-

mote Control” on page 4 and replace them with new

batteries to try to solve the problem.

• Have you chosen a TV channel whose reception is extreme-

ly bad? In this case, the BLUE BACK function will be activat-

ed, the entire screen becomes blue, and the sound is muted.

In spite of this, if you want to view the TV channel, follow the

description “BLUE BACK” on page 26 to try to change the

BLUE BACK function setting to OFF.

• Have you attempted to use the remote control at the sides

or rear of the TV or at a location more than seven meters

apart from the TV location? Operate the remote control in

the front of your TV or a location less than seven meters

from your TV to try to solve the problem.

• Have you connected the headphones to the TV? Connect-

ing the headphones to the TV causes sounds not to be is-

sued from the TV speakers.

• When you are viewing a teletext programme, you cannot op-

• Have you set the SPEAKER function to OFF? Follow the de-

scription “SPEAKER” on page 20 to confirm the SPEAKER

function setting to try to solve the problem.

erate the menus. Press the

button to return the teletext

ꢃ

programme to the ordinary TV programme to try operating

the menus.

ꢜ&&6ꢘ,ꢕ$ꢔ#6ꢓ

• If noise totally obscures the picture (snow), the aerial or aer-

ial cable may have trouble. Check the following to try to

solve the trouble:

• If the TV operation becomes disabled suddenly, press the

Main power button on the TV and turn off the main power.

Try to press the Main power button again to turn on the main

power. If the TV returns to a normal state, it is not a failure.

Has the TV and aerial been connected properly?

Has the aerial cable been damaged?

Is the aerial pointed to the right direction?

Is the aerial itself faulty?

ꢄꢔꢙꢓ6ꢘ$&ꢖ$ꢓ6ꢖ)

• When the SLEEP TIMER function operates, the TV is auto-

matically turned off. If the TV is turned off suddenly, try to

press the

(Standby) button to turn on the TV once

ꢄ

again. At this time, if the TV resumes a normal state, there

is no problem.

• If the TV or aerial receives interference from the other devic-

es, stripes or noise may appear in the picture. Move such

devices as an amplifier, personal computer, or a hair drier

that can cause interference away from your TV, or try

changing its location. If the aerial suffers interference from a

radio tower or high-voltage wire, please contact your local

dealer.

• When the TV is receiving a wide-screen signal (WSS) or a

signal concerning the screen size from an external device,

the ZOOM mode automatically changes. When you want to

resume the previous ZOOM mode, press the ZOOM button

again.

• If the TV receives interference from signal reflecting from

mountains or building, double-pictures (ghosting) will occur.

Try to change the aerial’s direction or replace the antenna

with the one with better directionality.

• If you bring a magnetised device such as a speaker near to

your TV, a picture may be warped or unnatural colors ap-

pear at he corners of the screen. In this case, keep the de-

vice apart from your TV. If the speakers causes such

phenomena, use the magnetic-shielded speakers instead.

• Are your COLOUR SYSTEM settings correct? Follow the

description “COLOUR SYSTEM” on page 18 to try to solve

the trouble.

• A picture may be tited due to the influence of the earth’s

magnetism. In this case, use the “PICTURE TILT” on

page 19 to complete the tilt.

• Has COLOUR or BRIGHT been controlled properly? Follow

the description “Picture Adjustment” on page 17 to try to ad-

just them properly.

• The TV may emit a crackling sound due to a sudden change

in temperature. It does not matter if a picture or sound does

not show any abnormality. If you hear crackling sounds fre-

quently while you are viewing the TV, other causes may be

assumed. For precautionary purposes, request your service

technician to inspect it.

• Videotaping teletext is not recommended because it may

not record correctly.

• When a white and bright still image (such as a white dress)

is displayed on the screen, the white part may look as if it

were coloured. It is a phenomenon unavoidable due to the

nature of the picture tube itself, and not due to a TV failure.

When the picture disappears from the screen, the unnatural

colours will also disappear.

• Touching the screen may cause you feel a slight electric

shock due to its static electricity. It is an unavoidable phe-

nomenon due to the construction of the picture tube. It is not

a problem with the TV. You can rest assured that this static

discharge does not have harmful influence over the human

body.

ꢜ&&6ꢘ)&#ꢖ5

• Have you adjusted BASS or TREBLE properly? If not, follow

the description “Sound Adjustment” on page 20 to try to ad-

just them properly.

ꢇꢂ

ꢀꢁꢂꢃꢄꢅꢄꢃꢆꢇꢄ ꢈꢀ

Model

AV-32WFR1EK*

AV-28WFR1EK*

Item

Broadcasting systems

Colour systems

CCIR I

PAL

•

The EXT terminals also support the NTSC 3.58/4.43 MHz system.

Channels and frequencies

Sound-multiplex systems

Teletext systems

E21-E69

NICAM (I) system

FLOF (Fastext), WST (World Standard System)

220 - 240 V AC, 50 Hz

Power requirements

Power consumption

Maximum: 241 W, Average: 134 W,

Standby: 0.8 W

Maximum: 238 W, Average: 127 W,

Standby: 0.8 W

Picture tube size

Audio output

Speakers

Viewable area 76 cm (measured diagonally)

Rated Power output: 20 W + 20 W + 5 W

Viewable area 66 cm (measured diagonally)

10 cm round × 2, 3.5 cm round × 2, (10 cm × 3 cm) oval × 1

EXT-1 terminal

Euroconnector (21-pin, SCART)

•

Video input, Audio L/R inputs and RGB inputs are available.

TV broadcast outputs (Video and Audio L/R) are available.

EXT-2 terminal

Euroconnector (21-pin, SCART)

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

Video and Audio L/R outputs are available.

T-V LINK functions are available.

EXT-3 terminal

EXT-4 terminal

Euroconnector (21-pin, SCART)

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

•

RCA connectors × 3

S-VIDEO connector × 1

•

Video input, S-VIDEO (Y/C) input and Audio L/R inputs are available.

AUDIO OUT terminal

RCA connectors × 2

•

Variable audio L/R outputs are available.

Variable out 0-1 Vrms, low impedance

SURROUND REAR terminal SPEAKER terminals for external surround speakers.

•

Surround rear sounds are output to the speakers.

For impedance 8-ohm speakers only

Rated power output: 7.5W + 7.5W

Headphone jack

Dimensions (W × H × D)

Weight

Stereo mini-jack (3.5 mm in diameter)

855 mm × 550 mm × 568 mm

56.5 kg

780 mm × 509 mm × 499 mm

40.5 kg

Accessories

Remote control unit RM-C52 × 1

AAA/R03 dry cell battery × 2

* A basic model number. The actual model number may have characters added (such as “S” denoting silver) indicating

the colour of the TV set.

Design and specifications subject to change without notice.

Pictures displayed on the screen using this TV’s ZOOM functions should not be shown for any commercial or demonstration pur-

pose in public places (cafes, hotels, etc.) without the consent of the owners of copyright of the original picture sources, as this

constitutes an infringement of copyright.

LCT0623-001A-U

0200-T-CR-JMUK

IBM CFC2 User Manual
Intel KM4AM User Manual
JVC LCT2621 001A H User Manual
KitchenAid KICU500 User Manual
Lindy 21519CH User Manual
NEC Electronics America Computer Monitor 92VX User Manual
Philips 55PL9224 User Manual
Philips 55PL9773 User Manual
Philips 107T User Manual
Philips 240PW9 User Manual