JVC AV 29SX78 User Manual

ENGLISH  
COLOUR TELEVISION  
INSTRUCTIONS  
AV-29QS27 AV-21QS27  
AV-29QX17 AV-21QX17  
AV-29QX17B AV-21QX17B  
AV-29QX27  
AV-29RS28  
AV-29RX18  
AV-29RX58  
AV-29RX78  
AV-29SS27  
AV-29SX17  
AV-29SX57  
AV-29SX77  
AV-29SX78  
AV-21QX27  
AV-21RS28  
AV-21RX18  
AV-21RX58  
AV-21RX78  
AV-21SS27  
AV-21SX17  
AV-21SX57  
AV-21SX77  
This illustration shows AV-29SX77.  
The illustrations of AV-29SX77 is used in this instruction manual for explanation  
purpose. Your TV may not look exactly the same as illustrated.  
GGT0153-001C-H  
Knowing your TVʼs features  
Contents  
Please see the chart below and check the function are equipped for your TV's model number.  
The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not  
available for your TV, it does not work and the logo "Ø" appears on the screen.  
Knowing your TVʼs features...................3  
Model No.  
Function  
I/II (STEREO/I II)  
PIP control buttons  
(Green label)  
TELETEXT control buttons  
(Black label)  
PICTURE TILT  
MaxxBass  
Picture setting........................................9  
Picture in picture (PIP) operation ........10  
Teletext operation................................11  
AI ECO SENSOR  
ECO MODE  
Features  
Descriptions  
Just connect DVD player to the television. The television will detect DVD signal and  
DVD MENU  
display picture on the screen automatically and you can adjust pictures and sound while  
you are watching DVD as your desire. When disconnect DVD player, the television will  
display the previous channel.  
MaxxBass  
MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be  
heard by our ears.  
PIP (Picture in Picture)  
TELETEXT  
You can view two screens (Main picture and Sub picture) at the same time.  
You can view teletext programmes which are broadcasted by some TV channels. Teletext  
programme is an information in text form.  
Troubleshooting...................................17  
Specifications ......................................18  
FAVORITE CH (Channel)  
A2/NICAM  
You can register up to four favorite channels for quick recall with one press.  
You can listen to the stereo sound or bilingual sound from TV programme broadcasting  
by A2 or NICAM Sound-multiplex system.  
(STEREO / I II)  
AI ECO SENSOR  
ECO MODE  
AI VOLUME  
TINT  
TV detects the brightness of your room and automatically adjust the picture brightness to  
a suitable level for a better eyecare.  
You can adjust TV screen contrast according to the brightness of your room to suitable  
level for a better eyecare.  
TV adjusts the volume automatically for all TV channels to avoid sudden change of the  
volume when selecting different TV channels or selecting Video Mode.  
You can adjust TINT setting for all colour systems, including PAL.  
Note : Some functions written in this instruction manual may not be available for your TV.  
3
Connections  
The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.  
CAUTION  
Ensure to turn off all equipments including the TV before connecting the AC mains plug to the AC outlet.  
Connecting to the rear component/video  
input terminal and output terminal  
Connecting to the aerial cable and VCR  
VHF/UHF  
outdoor  
aerial  
TV rear terminals  
VCR (for playing)  
DVD player  
(composite signals)  
75-ohm  
coaxial cable  
(not supplied)  
VCR (for recording)  
DVD player  
(with component  
video signals  
input)  
(Connect  
directly if not  
using a VCR)  
• When connecting to COMPONENT (VIDEO-2) input,  
depending on the connection, choose the appropriate  
video input using the menu (\ page 14).  
Connecting to the front video input terminal  
Camcorder or TV game  
Aerial cable  
RF output  
Rear of VCR  
(Connect via a VCR)  
Audio output  
RF input  
Headphones  
Video output  
S-video output  
After all the connections have been made,  
insert the mains plug to the AC outlet.  
4
 
Initial settings  
Searching for the channels (AUTO PROGRAM)  
Turn on the TV  
AUTO PROGRAM  
4
5
1
2
3
or wait 15 seconds to  
run Setup Tour  
22%  
OK / : EDIT  
JVC logo appears  
To stop or wait until AUTO PROGRAM  
finishes  
Select a language❇  
 
1
Select  
 
Edit the channel list  
�  
 
����  
�  
�  
 
 
�  
�  
�  
�  
�  
�  
��  
�  
�  
 
�  
�  
�  
2
To edit the  
channel list,  
\ page 15.  
Confirm  
To complete  
Setup Tour  
�  
�  
�  
 
�  
Select the Teletext language group❇  
TEXT LANGUAGE  
For details,  
\ page 11.  
1
Select  
GROUP–1  
GROUP–2  
GROUP–3  
GROUP–4  
To restart Setup Tour after above setup has completed  
OK / : SELECT  
DISPLAY : BACK  
MENU : EXIT  
(while the cursor is pointing to  
PICTURE MODE and within 3  
seconds)  
2
Confirm and proceed to AUTO  
PROGRAM  
This on screen of Language menu and Text Language menu are used  
for explanation purpose only. Your TV may not show the same as this on  
screen.  
5
 
Remote control buttons and basic functions  
Turn the TV on from standby and vice versa  
• Insert two batteries by following the and  
polarities and inserting the end first.  
• Use AA/R6/UM-3 dry cell batteries.  
• Iftheremotecontroldoesnotworkproperly,  
fit new batteries. The supplied batteries are  
for testing, not regular use.  
Programme and recall 4 favourite channels  
(colour buttons: red, green, yellow, blue)  
Choose the TV channel you wish to programme  
PROGRAMMED!  
Press and hold  
any button  
If this symbol  
is shown, it is  
only valid in  
the European  
Union.  
WARNING:  
Batteries shall not be  
exposed to excessive heat  
such as direct sunshine,  
fire or the like.  
Repeat to programme another favourite channel.  
To recall the favourite channel, press the  
corresponding colour button.  
• When the TV is in Text function or MENU mode, the  
favourite channel function is not available.  
• When the TV is in PIP function, the favourite channel  
function cannot be programmed but can recall the  
favourite channel.  
Operating the menus (\ page 7)  
• Display the programme or video terminal number and  
stereo/bilingual broadcast system.  
To return to the previous menu  
TV or video terminal input selection, Exit from the menu  
Turn the volume Off / On  
RETURN PLUS function  
Return to the frequently viewed channel.  
Choose the channel you want to programme  
Programme number selection  
For two digits :  
RETURN PLUS  
PROGRAMMED!  
Press and hold  
To cancel  
Adjust the volume level, Turn off Muting  
Channel selection  
Select the desired channel number.  
RETURN PLUS  
CANCELED!  
Press and hold  
RETURN function  
If you have not set or have canceled the RETURN PLUS  
channel, this will return to the previously viewed channel.  
For Hyper Scan  
PR changes without changing the  
picture. Once you stop pressing  
CHANNEL+ or CHANNELbutton,  
picture will change to the desired PR.  
Press and hold  
6
 
TV buttons and functions  
The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.  
TV or Video terminal input selection,  
Exit from the menu  
Display the menu and exit after finish setting  
Video and audio  
input jacks for  
VIDEO-3 mode  
Channel selection, To select menu function  
ECO sensor  
TVʼs main power on/off  
Volume level adjustment, To choose a Top  
menu and adjust the desired menu function  
Remote control sensor  
Headphone jack  
Power lamp - Indicates the TVʼs status.  
No colour: TVʼs main power is being turned off.  
Red: TVʼs main power is turned on.  
Blink: While the TV is in standby mode, ON TIMER function is in used.  
While the TV is in turn on mode, OFF TIMER function is in used.  
Note: When you turn off the power switch while TV is in standby mode,  
the power lamp will go off in 5-10 seconds. When you operate the  
TV, POWER Lamp will blink.  
Operating the menus  
MENU  
TOP menu  
SET UP menu  
2nd menu  
3rd menu  
EDIT  
Example: MENU  
EDIT/MANUAL  
To display the To select a Top menu.  
MENU.  
To select a second menu.  
To select for go to third  
menu.  
To select, adjust or  
choose the setting of a  
function.  
To exit.  
Select  
Select  
or  
Select  
Select  
or  
When the cursor is at MENU.  
To display  
To return to  
Select  
other pages. the previous  
menu.  
Adjust  
Depend to the on screen Depend to the on screen  
guide. guide.  
7
 
Operating the menus (continued)  
You can use the DVD MENU by switch channel to VIDEO-2 or press the DVD MENU button on the remote control. See the menus location in the below table.  
For RF / Video-1 / Video-3 (MENU)  
3rd menu / Adjustments  
For Video-2 (DVD MENU)  
3rd menu / Adjustments  
Top menu Page  
2nd menu  
PICTURE MODE  
DVD THEATER STATUS set to OFF : USER / SHARP / CLEAR / VIVID / SOFT  
DVD THEATER STATUS set to ON : USER / SHARP / CLEAR  
9
USER / VIVID / SOFT  
PICTURE  
9
PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP / COLOUR / TINT  
PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP/  
COLOUR / TINT  
PICTURE MODE set to SHARP or CLEAR or SOFT or VIVID :  
PICTURE SETTING  
PICTURE MODE set to SOFT or VIVID:  
or  
DVD THEATER STATUS set to OFF : NORMAL / COOL / WARM  
9
WHITE BALANCE  
NORMAL / COOL / WARM  
DVD THEATER STATUS set to ON :  
DVD MENU  
13  
VNR  
OFF / AUTO / MIN / MAX  
PICTURE  
*
(Only available in RF, VIDEO-1 and VIDEO-3)  
AUTO SIGNAL DETECT  
(Only available in VIDEO-2)  
13  
ON / OFF  
ON / OFF  
DVD THEATER STATUS  
(Only available in VIDEO-2)  
13  
12  
STEREO /  
I
.
II (Only available in RF)  
/
/ I / II  
12 AI VOLUME  
ON / OFF  
ON / OFF  
SOUND  
or  
12 SOUND MODE  
USER / MUSIC / CINEMA / NEWS  
USER / MUSIC / CINEMA / DRAMA  
EQUALIZER (SOUND MODE set to USER  
and CINEMA SURROUND set to OFF only)  
11  
Adjust the sound level of each frequencies.  
Adjust the sound level of each frequencies.  
DVD MENU  
SOUND  
12 BALANCE  
Left Stronger / Right Stronger  
ON / OFF  
Left Stronger / Right Stronger  
ON / OFF  
*
11 CINEMA SURROUND  
11 MaxxBass  
OFF / HIGH / LOW  
Set timer for turn on the TV  
Set timer for turn off the TV  
ON / OFF  
OFF / HIGH / LOW  
Set timer for turn on the TV  
Set timer for turn off the TV  
ON / OFF  
14 ON TIMER  
14 OFF TIMER  
14 CHILD LOCK  
9
COMPRESS (16:9 )  
ON / OFF  
ON / OFF  
FEATURES  
DVD THEATER STATUS set to OFF : OFF / MODE-1 / MODE-2 / DISPLAY or  
OFF / ECO-1 / ECO-2  
AI ECO SENSOR or  
ECO MODE  
OFF / MODE-1 / MODE-2 / DISPLAY or  
OFF / ECO-1 / ECO-2  
10  
DVD THEATER STATUS set to ON :  
VIDEO / COMPONENT  
ON / OFF  
14 VIDEO-2 SETTING  
BLUE BACK  
VIDEO / COMPONENT  
ON / OFF  
9
10 PICTURE TILT  
14 BEEP  
Tilt the picture.  
Tilt the picture.  
ON / OFF  
ON / OFF  
15 AUTO PROGRAM  
15 EDIT / MANUAL  
Register the TV channel.  
MOVE / INSERT / DELETE / MANUAL  
Register the TV channel.  
MOVE / INSERT / DELETE / MANUAL  
SET UP  
ViDEO-2 SETTING set to COMPONENT : AUTO  
ViDEO-2 SETTING set to VIDEO : AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43  
9
COLOUR SYSTEM  
AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43  
13 LANGUAGE  
Select the languages.  
Select the languages.  
11 TEXT LANGUAGE  
Select the Text language.  
Select the Text language.  
* For DVD THEATER STATUS set to ON only  
8
Picture setting  
COLOUR SYSTEM  
PICTURE MODE  
You can select the appropriate colour system when the picture is not clear  
or no colour appears.  
AUTO PAL SECAM NTSC3.58 NTSC4.43  
You can choose the desired picture setting with one-touch.  
USER  
You can change this picture setting (CONTRAST,  
BRIGHT, SHARP, COLOUR, TINT) as you like.  
(\ PICTURE SETTING)  
To sharpen the picture.  
You can also operate this function from the menu.  
SHARP  
VIVID  
MENU  
SET UP menu  
COLOUR SYSTEM  
Heightens contrast and sharpness.  
Softens contrast and sharpness.  
To soften the picture.  
SOFT  
For the colour system in each country or region, see the table below:  
CLEAR  
Area  
Country or Region  
System  
You can also operate this function from the menu.  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,  
Indonesia, Malaysia, Singapore, Thailand, India, China, Vietnam,  
Hong Kong, etc.  
PAL  
MENU  
PICTURE menu  
PICTURE MODE  
Asia,  
Middle East  
To return the USER setting to default, press the blue button when the  
PICTURE SETTING menu is displayed.  
See details for the location menus in "Operating the menus" \ Page 8.  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
SECAM  
NTSC  
SECAM  
PAL  
Europe  
Oceania  
Africa  
Czech Republic, Poland, Germany, Holland, Belgium, UK, etc.  
Australia, New Zealand, etc.  
PICTURE SETTING  
You can adjust the desired picture setting when selecting USER in  
PICTURE MODE.  
PAL  
Republic of South Africa, Nigeria, etc.  
Egypt, Morocco, etc.  
PAL  
SECAM  
MENU  
MENU  
PICTURE menu  
PICTURE menu  
PICTURE MODE  
USER  
1
2
WHITE BALANCE  
You can change the white balance of the picture to better match the type  
of video being viewed.  
PICTURE SETTING  
CONTRAST 2 : Lower contrast  
3 : Higher contrast  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
MENU  
PICTURE menu  
WHITE BALANCE  
BRIGHT  
SHARP  
COLOUR  
TINT  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
NORMAL  
COOL  
Normal white balance  
Bluish white  
WARM  
Reddish white  
See details for the location menus in “Operating the menus” \ Page 8.  
When DVD THEATER STATUS set to ON, WHITE BALANCE is not  
available in VIDEO-2. \ Page 8.  
BLUE BACK  
COMPRESS (16:9)  
You can set the TV to automatically change to a blue screen and mute the  
sound if the signal is weak or absent, or when there is no input from an  
antenna.  
You can convert a normal picture (4:3 aspect ratio) into a wide picture  
(16:9 aspect ratio).  
(Choose ON or OFF)  
(Choose ON or OFF)  
MENU  
FEATURES menu  
BLUE BACK  
MENU  
FEATURES menu  
COMPRESS (16:9)  
This function is only available in RF mode.  
9
Picture setting (continued)  
Picture in picture (PIP) operation  
You can display a sub picture within the main picture on the screen.  
to display the sub picture.  
AI ECO SENSOR (ECO)/ECO MODE  
You can automatically adjust TV screen contrast according to the  
brightness of your room.  
You can hear the sound from the main picture only.  
OFF  
Cancel the function.  
Mild contrast (recommended).  
Even contrast.  
When main picture and sub picture are the same TV channel:  
MODE-1/ECO-1  
MODE-2/ECO-2  
Press SUB-P -/+  
Press (Input)  
Main picture will be changed TV channel follow as sub  
picture.  
DISPLAY (for Al ECO SENSOR only) Display the graphic of the function.  
To change sub picture to video mode.  
You can also operate this function from the menu.  
Press CHANNEL -/+ Sub picture will be changed TV channel follow as Main  
picture.  
MENU  
FEATURES menu  
AI ECO SENSOR / ECO MODE  
When DVD THEATER STATUS set to ON, Al ECO SENSOR / ECO  
MODE is not available in VIDEO-2. \ Page 8.  
Press CHANNEL -/+ Until main picture change to video mode.  
To cancel, press the PIP button again.  
Correcting the Slanting Picture (PICTURE TILT)  
While a sub picture is being displayed, you can perform the following  
functions.  
You can correct the picture tilt caused by the earthʼs magnetic force.  
Select the desired TV channel for sub picture.  
(SUB-P)  
MENU  
FEATURES menu  
PICTURE TILT  
1
2
(Input)  
(Swap)  
Select the input source for the sub picture.  
The following display appears.  
PICTURE TILT  
Swap between the main picture and sub picture.  
(Position) Change the sub picture position.  
lower right lower left  
upper right upper left  
Freeze the sub picture.  
DISPLAY : BACK  
MENU : EXIT  
(Freeze)  
When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub  
picture.  
When VIDEO-2 is set to component and if the input source of the main  
picture is set to VIDEO-2 with component, PIP button is disabled and sub  
picture cannot be displayed.  
Tilt the picture  
becomes level  
To confirm  
10  
Teletext operation  
Sound setting  
MaxxBass  
TELETEXT  
You can watch the Teletext broadcast channel with TEXT function.  
You can enjoy an enhanced bass sound which cannot be played by  
normal speakers.  
TV mode TEXT twin mode TEXT mode  
1
OFF  
MaxxBass is turned off.  
MaxxBass effect is high.  
MaxxBass effect is low.  
HIGH  
LOW  
2
Selecting other Teletext pages.  
You can also operate this function from the menu.  
OR  
OR  
MENU  
SOUND menu  
MaxxBass  
"MaxxBass" is a registered trademark of Waves Audio Ltd. in the USA,  
Japan and other countries.  
OR  
3
You can also operate the teletext using the following buttons:  
to return to the TV mode.  
CINEMA SURROUND  
You can enjoy an enhanced sound for wider audience.  
(Hold)  
Hold a teletext page.  
To cancel, press the button again.  
OFF  
ON  
Cancel the function.  
Listen to sound with wider audience effect.  
(Reveal)  
Display the hidden text (example: answers to a quiz).  
To cancel, press the button again.  
Enlarge the teletext display.  
You can also operate this function from the menu.  
(Size)  
(Index)  
(Cancel)  
MENU  
SOUND menu  
CINEMA SURROUND  
Return to the index page instantly.  
Watch TV programme while waiting for a teletext page.  
When the teletext page is found, a page number appears at the  
upper left of the screen.  
EQUALIZER  
Press the button to view the teletext page.  
Sub-page numbers are displayed at the left of the screen.  
To cancel sub-page function, press the button again.  
You can adjust the sound level of each frequencies when selecting USER  
mode in SOUND MODE.  
(
Sub-page  
)
MENU  
MENU  
SOUND menu  
SOUND menu  
SOUND MODE  
EQUALIZER  
USER  
1
2
3
TEXT LANGUAGE  
You can set the Teletext language group that corresponds to the programmes.  
Select and adjust the desired frequencies.  
MENU  
SET UP menu  
TEXT LANGUAGE  
 
GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian,  
French, Spanish, Portuguese, Turkish  
�� ��  
 
�  
��  
GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian, Rumanian  
GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian  
GROUP-4 English, Polish, French, Turkish, Arabic, Farsi  
��  
 
�  
Adjust high frequency will affect higher pitch sound and vice versa.  
When CINEMA SURROUND set to ON, you cannot adjust EQUALIZER  
(\ page 8).  
Depending on the broadcast, the language set may not display properly  
(\ page 5).  
11  
 
Sound setting (continued)  
STEREO / I II (  
ß
I/II)  
AI VOLUME  
You can enjoy the stereo and bilingual broadcasted programmes.  
You can adjust the volume of all the channels and video inputs to the  
same level automatically depends on the strength of signal of the sources.  
Select stereo sound.  
(Choose ON or OFF)  
AI VOLUME  
MENU  
SOUND menu  
Select monaural sound.  
I
Select bilingual I (sub I).  
SOUND SYSTEM  
II  
Select bilingual II (sub II).  
This function is only available in RF mode.  
You can also operate this function from the menu.  
You can select an appropriate sound system when abnormal sound  
occurs even when the picture appears normal.  
STEREO/I II  
MENU  
SOUND menu  
B/G I D/K M  
BALANCE  
This function is not available in video mode.  
For the sound system in each country or region, see the table below:  
You can adjust the volume balance between the left and right speakers.  
Area  
Country or Region  
System  
MENU  
SOUND menu  
BALANCE  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,  
Indonesia, Malaysia, Singapore, Thailand, India, etc.  
B/G  
China, Vietnam, etc.  
D/K  
I
Asia,  
Middle East  
SOUND MODE  
Hong Kong, etc.  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.  
Philippines, Taiwan, Myanmar, etc.  
Russia, Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
B/G  
M
You can choose the desired sound setting.  
USER  
Change the sound setting as you like.  
Select USER and adjust the frequencies in EQUALIZER  
D/K  
B/G  
I
Europe  
(100, 300, 1K, 3K, 8K Hz), \ page 11.  
MUSIC  
CINEMA  
NEWS  
Emphasize on music effect.  
Emphasize on movie sound.  
Emphasize on vocal sound.  
Emphasize on drama sound.  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, Egypt, Morocco, etc.  
B/G  
I
B/G  
DRAMA  
You can also operate this function from the menu.  
MENU  
SOUND menu  
SOUND MODE  
When SOUND MODE is set to other than USER, EQUALIZER function  
becomes unavailable.  
See details for location menus in "Operating the menus" \ Page 8.  
12  
Customized setting  
AUTO SIGNAL DETECT  
VNR  
When the DVD input signal is detected, the input mode will automatically  
change to VIDEO-2 and when the DVD input signal is not detected, the  
input mode will automatically change to RF previous input mode.  
DVD players: Press the “POWER ON” button on the player for signal  
detection.  
You can reduce the picture noise.  
MENU  
PICTURE menu  
VNR  
OFF  
VNR is turned off.  
AUTO  
MIN  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
VCRs: Press the “POWER ON” button on the device, followed by the  
“PLAY” button, signal detection and DVD menu display.  
MAX  
 
AUTO SIGNAL  
DETECT  
If you select MAX, the picture becomes softer even if the original picture  
is sharp.  
Only available in RF, VIDEO-1 and VIDEO-3. \ Page 8.  
DVD MENU PICTURE  
(Choose ON or OFF)  
Only available in VIDEO-2 mode. \ Page 8.  
LANGUAGE  
DVD THEATER STATUS  
You can choose the desired on screen display language.  
You can enjoy an enhanced picture quality for movie playback in a dark  
room, like watching a movie in the theater.  
MENU  
SET UP menu  
LANGUAGE  
�  
DVD THEATER  
DVD MENU PICTURE  
STATUS  
OFF  
ON  
Cancel the function.  
Enjoy movie playback with suitable colour temperature, sharp  
subtitles and improved gradation for black, like in a theater.  
When you set DVD THEATER STATUS to ON, Al ECO SENSOR / ECO  
MODE and WHITE BALANCE adjustment become unavailable.  
Only available in VIDEO-2 mode. \ Page 8.  
13  
 
Customized setting (continued)  
ON TIMER  
BEEP  
You can set the TV to turn on automatically from standby mode at a set  
channel and time.  
You can use the BEEP function to alert you during AUTO SIGNAL  
DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF  
TIMER operations and when some buttons on the remote control are  
pressed.  
MENU  
FEATURES menu  
ON TIMER  
1
 
 
�����  
(Choose ON or OFF)  
MENU  
FEATURES menu  
BEEP  
�  
��  
��  
 
�  
CHILD LOCK  
You can disable the front control buttons of the TV.  
2
3
Choose the PR (channel) that you want to watch when the TV turns on.  
External input, AV position and any un-preset channel cannot be  
chosen for PR.  
(Choose ON or OFF)  
CHILD LOCK  
MENU  
FEATURES menu  
VIDEO-2 SETTING  
Set the ON TIMER to your desired period of time.  
When the ON TIMER is set to other than 00:00, the ON TIMER is  
activated. You can set the period of time to a maximum of 12 hours in  
15-minute intervals.  
You can set the VIDEO-2 SETTING according to the video signal output  
from external devices connected to the VIDEO-2 terminal.  
(Factory setting is  
COMPONENT)  
MENU  
FEATURES menu  
VIDEO-2 SETTING  
4
To off the ON TIMER, set ON TIMER to OFF.  
VIDEO  
If a normal video signal (composite video signal) is input.  
Note: If TV is not in standby mode when ON TIMER is reach the setting  
time, this case is not available.  
B
COMPONENT If a component video signal (Y/C /C ) is input.  
R
You must choose a setting according to the signal that you input to  
VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you  
must set VIDEO-2 SETTING to VIDEO.)  
OFF TIMER  
You can set the TV to turn off automatically to standby mode after a set  
time.  
For connection, \ page 4.  
OFF TIMER  
10  
MENU  
FEATURES menu  
OFF TIMER  
1
2
You can set the period of time to a maximum of 120 minutes in 10  
minutes intervals.  
3
4
5
When the remaining elapse time is one minute, “GOOD NIGHT!”  
appears on the screen.  
You can display the OFF TIMER screen again to confirm or change the  
remaining time.  
To off the OFF TIMER, select OFF or turn off the TVʼs main power.  
14  
TV channel presetting  
To register the TV channels automatically  
(AUTO PROGRAM)  
OR  
6
7
to search for the TV channel.  
(green)  
(red)  
You can register the TV channels automatically.  
Searching stops when a channel is found and displayed.  
MENU  
SET UP menu  
AUTO PROGRAM  
1
2
If the reception is  
poor  
Press the yellow or blue button to fine tune the TV  
channel.  
AUTO PROGRAM  
If noisy sound is  
heard  
Press the 3 button to choose an appropriate sound  
system.  
22%  
or  
OK / : EDIT  
8
to exit.  
3
4
to stop or when AUTO PROGRAM finishes.  
The EDIT menu appears.  
To edit the channel list  
(MOVE, DELETE and INSERT in the EDIT menu)  
You can edit the TV channel list as you like.  
To edit the channel list Proceed to Step 2 of “To edit the channel list” on this  
After this operation, other channelʼs PR number will be changed.  
page.  
If a channel is not  
registered  
Proceed to Step 3 of “To register the TV channels  
manually” on this page.  
1
2
3
Repeat Steps 1 and 2 of “To register the TV channels manually  
(MANUAL in the EDIT menu)”, \ see left.  
To exit the menu  
Press the MENU button.  
Choose the channel which you want to change its PR number, or  
delete, or register a new channel.  
To register the TV channels manually  
(MANUAL in the EDIT menu)  
You can register the TV channels into the TVʼs channel list manually.  
To change the Press the 3 button. Then move it to the new PR number  
PR number  
(MOVE)  
you want to use for the channel by pressing the 5/button.  
Finally press the 2 button.  
Press the yellow button.  
MENU  
SET UP menu  
EDIT/MANUAL  
1
2
To delete  
the channel  
(DELETE)  
 
 
�  
�  
�  
�  
�  
�  
�  
��  
�  
�  
 
�  
�  
�  
To add the  
new channel  
(INSERT)  
If you add a new TV channel of NTSC-M system, press the  
SOUND SYSTEM button to change the sound system to M,  
then select EDIT/MANUAL in SET UP menu. Press the green  
button, then press the 3 button to choose “CC” or “CH”.  
Enter the CH/CC number for the channel you wish to add.  
The TV starts to search for the channel.  
or  
 
�  
�  
�  
3
4
Choose the channel which you want to register.  
to activate the MANUAL function. (The sound system of  
the channel appears at the right of the CH/CC number.)  
When a TV channel has already been registered in PR99,  
using the INSERT function deletes that TV channel.  
(blue)  
5
to choose an appropriate sound system.  
For details, see “SOUND SYSTEM”. \ Page 12  
4
to exit.  
15  
 
TV channel presetting (continued)  
CH/CC number  
CC  
US  
E
CCIR  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
OIRT  
AUSTRALIA  
CH  
US  
CCIR  
E33  
E34  
E35  
E36  
E37  
E38  
E39  
E40  
E41  
E42  
E43  
E44  
E45  
E46  
E47  
E48  
E49  
E50  
E51  
E52  
E53  
E54  
E55  
E56  
E57  
E58  
E59  
E60  
E61  
E62  
E63  
E64  
E65  
E66  
E67  
E68  
E69  
OIRT  
AUSTRALIA  
AU-34  
When you want to use the INSERT function on  
page 15, find the CH/CC number corresponding  
to the channel number of the TV channel from  
this table.  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
CC 38  
CC 39  
CC 40  
CC 41  
CC 42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
CC 78  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
CH 33  
CH 34  
CH 35  
CH 36  
CH 37  
CH 38  
CH 39  
CH 40  
CH 41  
CH 42  
CH 43  
CH 44  
CH 45  
CH 46  
CH 47  
CH 48  
CH 49  
CH 50  
CH 51  
CH 52  
CH 53  
CH 54  
CH 55  
CH 56  
CH 57  
CH 58  
CH 59  
CH 60  
CH 61  
CH 62  
CH 63  
CH 64  
CH 65  
CH 66  
CH 67  
CH 68  
CH 69  
US-33, W+48  
US-34, W+49  
US-35, W+50  
US-36, W+51  
US-37, W+52  
US-38, W+53  
US-39, W+54  
US-40, W+55  
US-41, W+56  
US-42, W+57  
US-43, W+58  
US-44, W+59  
US-45, W+60  
US-46, W+61  
US-47, W+62  
US-48, W+63  
US-49, W+64  
US-50, W+65  
US-51, W+66  
US-52, W+67  
US-53, W+68  
US-54, W+69  
US-55, W+70  
US-56, W+71  
US-57, W+72  
US-58, W+73  
US-59, W+74  
US-60, W+75  
US-61, W+76  
US-62, W+77  
US-63, W+78  
US-64, W+79  
US-65, W+80  
US-66, W+81  
US-67, W+82  
US-68, W+83  
US-69, W+84  
F
AU-35  
G
AU-36  
H
AU-37  
I
AU-38  
J
AU-39/AU-40  
AU-41  
K
L
Channel No. Country  
AU-42  
M
AU-43  
N
AU-44  
US  
United States, Philippines, etc..  
Middle East, Southeast Asia, etc..  
O
AU-45  
P
AU-46  
CCIR  
OIRT  
Q
AU-47/AU-48  
AU-49  
R
S
AU-50  
Eastern Europe, Russia, Vietnam,  
etc..  
T
AU-51  
U
AU-52  
V
AU-53  
W
AU-54  
AUSTRALIA Australia, etc..  
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
AU-55/AU-56  
AU-57  
AU-58  
AU-59  
AU-60  
Channel  
CH  
AU-61  
US  
CCIR  
E2  
OIRT  
R1  
AUSTRALIA  
AU-0  
AU-62  
CH 02  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
CH 14  
CH 15  
CH 16  
CH 17  
CH 18  
CH 19  
CH 20  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CH 26  
CH 27  
CH 28  
CH 29  
CH 30  
CH 31  
CH 32  
US-2  
AU-63/AU-64  
AU-65  
US-3  
E3  
AU-1  
US-4  
E4  
R2  
R6  
R7  
R8  
R9  
AU-2  
AU-66  
US-5  
E5  
AU-6  
AU-67  
US-6  
E6  
AU-7  
AU-68  
US-7  
E7  
AU-8  
AU-69  
US-8  
E8  
AU-9  
US-9  
E9  
US-10  
E10  
E11  
E12  
R10  
R11  
R12  
AU-10  
AU-11  
US-11  
US-12  
US-13  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
US-21, W+36  
US-22, W+37  
US-23, W+38  
US-24, W+39  
US-25, W+40  
US-26, W+41  
US-27, W+42  
US-28, W+43  
US-29, W+44  
US-30, W+45  
US-31, W+46  
US-32, W+47  
CC  
US  
CCIR  
S-1  
OIRT  
AUSTRALIA  
AU-5  
CC 01  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
S-2  
S-3  
S-4  
S-5  
E21  
E22  
E23  
E24  
E25  
E26  
E27  
E28  
E29  
E30  
E31  
E32  
S-6  
AU-5A  
S-7  
S-8  
X
Y
Z
Z+1  
Z+2  
S-9  
R3  
R4  
R5  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
AU-3  
AU-4  
AU-28  
AU-29  
AU-30  
AU-31/AU-32  
AU-33  
A-5  
A-4  
A-3  
A-2  
A-1  
A
B
C
D
16  
Troubleshooting  
If a problem occurs when you are using the TV, check the below  
troubleshooting guide before calling for repair.  
Problem  
Cause / Solution  
Page  
Colour patches appear • This maybe due to magnetized device such  
at the corner of the  
screen  
as a speaker placed near to your TV. Move it  
away from your TV. Alternatively, you can also  
use the magnetic shielded speaker.  
Problem  
Cause / Solution  
Page  
No picture, no sound  
• Deactivate the BLUE BACK function if it is  
turned on.  
9
Picture is tilted  
• This maybe due to the earth magnetism. Refer 10  
to “PICTURE TILT” to correct the tilt.  
• Choose the appropriate sound system. Refer  
to “SOUND SYSTEM”.  
12  
Image takes a short  
period to be displayed  
• Image required time to stabilize before display.  
This is not a malfunction.  
Snowy picture  
• Check the aerial cable and TV connections.  
4
Stripes appear on the  
picture  
• Interference caused by devices such as an  
amplifier, personal computer, or a hair drier.  
Move it away from your TV.  
TV may emit crackling  
sound  
• This is due to a sudden change in temperature  
and it is not a malfunction. If the crackling  
sound is too frequent, request your service  
technician for inspection.  
Double-pictures  
(ghosting) occur  
• Interference occurs caused by signal reflecting  
from mountains or building. Try to adjust the  
aerialʼs direction or use another antenna.  
Feel a slight electric  
shock when touching  
the TV screen  
• This is due to the static electricity of the  
picture tube and it will not harm the human  
body. This is not a malfunction.  
Poor picture  
• Choose the appropriate colour system. Refer  
to “COLOUR SYSTEM”.  
• Adjust the COLOUR or BRIGHT setting. Refer  
to “PICTURE SETTING”.  
9
9
AUTO SIGNAL DETECT • Set the AUTO SIGNAL DETECT function to  
does not work  
13  
ON.  
• Turn the VCR or DVD Player off and on again.  
• Check that the video cable connection on  
VIDEO-2 is properly connected.  
White and bright still  
image look as if it was  
coloured  
• Inevitable phenomenon due to the nature of  
the picture tube. This is not a malfunction.  
Suddenly, the TV input • Check whether the AUTO SIGNAL DETECT  
changes to VIDEO-2  
13  
Top of the image from  
software products or  
video tape is distorted  
• Due to the condition of the video signal, the  
image was not properly recorded. This is not  
a malfunction.  
function is on or off.  
• AUTO SIGNAL DETECT function may work  
when you operate the VCR or DVD player  
even if you do not make it to playback.  
Poor sound  
• Adjust the sound frequency properly. Refer to  
“SOUND SYSTEM”.  
12  
12  
6
AUTO SIGNAL DETECT • Check the video cable connection.  
does not work correctly • Some VCR or DVD player may output the  
video signal discontinuously. If this happens,  
AUTO SIGNAL DETECT function cannot work  
correctly.  
Stereo or bilingual  
sound is unclear  
• TV channel reception is poor. Change the  
stereo/bilingual mode to mono sound.  
Cannot operate the  
remote control  
• The batteries may be exhausted. Replace with  
new batteries.  
• Ensure that you are operating the remote  
control at less than seven meters from the  
front of your TV.  
“PLEASE DISCONNECT • Please disconnect either S-VIDEO cable or  
video input cable from video-1 input.  
VIDEO-1 CABLE!”  
appears on the screen.  
Cannot operate the  
menus  
• Press TV/VIDEO button to return to TV mode  
and try operating the menus.  
Cannot operate the  
front control buttons  
• Deactivate the CHILD LOCK function if it is  
turned on.  
14  
17  
Specifications  
TV RF systems  
B, G, I, D, K, M  
Colour systems  
Receiving channels  
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
AC 110 to 240 V, 50 Hz / 60 Hz  
Power requirements  
External input / output  
VIDEO-1  
S-video input, VIDEO input, AUDIO L/R input  
VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input  
VIDEO input, AUDIO L/R input  
VIDEO-2/COMPONENT  
VIDEO-3  
OUTPUT  
VIDEO output, AUDIO L/R output  
Headphone jack  
Stereo mini jack (3.5 mm diameter)  
Sound-multiplex systems  
Teletext system  
Language displayed by teletext  
A2 (B/G) or NICAM (B/G, I, D/K)  
FLOF (Fastext), WST (World Standard Text)  
Refer to the table in the description “TEXT LANGUAGE” (\ page 11).  
Depending on the models, STEREO/I II function for the Sound-multiplex systems or Teletext function may not be available.  
Design and specifications subject to change without notice.  
18  
Memo  
19  
© 2008 Victor Company of Japan, Limited  
0508SCT-NF-MT  

JVC AV 28H50SU User Manual
Kenwood Computer Monitor DDX4033BTM User Manual
KitchenAid KGCS166GBT1 User Manual
KitchenAid KGCS166GSS06 User Manual
LG Electronics LG Life Good Computer Monitor L204WT User Manual
MSi 945 P SERIES MS 7204 User Manual
NEC MultiSync LCD225WXM User Manual
NEC MultiSync LCD1970NXp User Manual
Philips 29PT4873 User Manual
Philips Cineos HDTV Monitor with Pixel Plus User Manual