JVC AV 21W33B User Manual

Contents  
Safety precautions  
Preparation  
1 Confirm which remote control you have  
2 Insert the batteries into the remote control  
3 Connecting the antenna and VCR  
2
3
3
3
4
5
5
6
7
COLOR TELEVISION  
...  
...  
INSTRUCTIONS  
.............  
..........................  
Thank you for buying this JVC  
color television.  
4 Connecting other devices  
5 Connect the power cord to the AC outlet  
...  
To make sure you understand how to  
use your new TV, please read this  
manual thoroughly before you begin.  
...............................................  
6 Initial setting  
Basic operation  
Remote control buttons and functions 8  
.....................................  
ECO SENSOR button  
8
8
8
8
8
8
9
9
9
9
9
.................................  
PICTURE MODE button  
CLOSED CAPTION button  
AV-21W33  
AV-25L33  
AV-29W33  
AV-21W33B  
AV-25L33B  
AV-29W33B  
.............................  
..................................................  
BASS button  
OFF TIMER button  
.........................................  
................................  
COLOR SYSTEM button  
................................  
CHANNEL SCAN button  
CINEMA SURROUND button  
........................  
..........................................  
RETURN + button  
.............................................  
.............................................  
DISPLAY button  
MUTING button  
Using the TV’s menus  
Basic operation  
10  
10  
11  
11  
11  
11  
12  
12  
12  
12  
13  
13  
14  
14  
14  
15  
15  
15  
............................................  
...........................................................  
INPUT  
...............................................  
PICTURE TILT  
...............................................................  
VNR  
........................................  
.......................................  
COMPRESS (16:9)  
CLOSED CAPTION  
.................................................  
..................................................  
CHILD LOCK  
BLUE BACK  
..........................................  
................................................  
AUTO SHUTOFF  
VIDEO-2 SET  
.......................................  
AUTO CH PRESET  
............................................  
CHANNEL SKIP  
..................................................  
LANGUAGE  
..............................................................  
MTS  
......................................  
.......................................  
..................................................  
Picture adjustment  
Sound adjustment  
AI VOLUME  
Attaching the Twin Port Bass Blaster Unit 16  
TV buttons and parts  
Using the buttons on the TV  
Troubleshooting  
17  
18  
19  
Specifications  
Back cover  
LCT1180-001A-H  
0902-NIC-JMT  
© 2002 VICTOR COMPANY OF JAPAN, LIMITED  
Preparation  
1 Confirm which remote control you have  
Your TV comes with one of the two remote controls shown below. Functions you can  
operate differ depending on the type of remote control.  
<RM-C1018>  
<RM-C1019>  
POWER  
POWER  
MUTING  
MUTING  
COLOR  
CINEMA  
SURROUND  
COLOR  
CINEMA  
SYSTEM  
SYSTEM  
SURROUND  
BASS  
ECO  
ECO  
SENSOR  
SENSOR  
DISPLAY  
DISPLAY  
MENU  
MENU  
CLOSED  
CAPTION  
CLOSED  
CAPTION  
TV/VIDEO  
TV/VIDEO  
1
4
7
2
5
8
0
3
6
1
4
2
5
8
0
3
6
OFF  
OFF  
TIMER  
TIMER  
PICTURE  
MODE  
PICTURE  
MODE  
9
7
9
CHANNEL  
SCAN  
CHANNEL  
SCAN  
100+  
RETURN+  
100+  
RETURN+  
CHANNEL  
VOLUME  
CHANNEL  
VOLUME  
RM-C1019  
RM-C1018  
TV  
TV  
2 Insert the batteries into the remote control  
Correctly insert two batteries, observing the  
,
and polarities and inserting the end first.  
.
.
CAUTION:  
Follow the cautions printed on the batteries.  
Notes:  
Use AA/R6/UM-3 dry cell batteries.  
If the remote control does not work properly,  
replace with new batteries.  
The supplied batteries are for testing, not regular  
use.  
3
Preparation  
3 Connecting the antenna and VCR  
Read the manuals provided with the devices. Depending on the device, the connection method  
may be different from the diagrams. Also the device settings may need to change depending on  
the connection method.  
Turn off all the devices including the TV.  
Connecting cables are not supplied.  
When connecting monaural audio to the TV, use the L/MONO jack.  
Connecting the antenna  
VHF/UHF outdoor antenna  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
V
Y
C
V
L
/V  
B
L
L
/MONO  
/ MONO  
R
C
R
R
R
Connecting the antenna and VCR  
VHF/UHF outdoor antenna  
COMPONENT  
VIDEO-1  
INPUT  
(
)
VIDEO-2  
INPUT  
OUTPUT  
V
Y
C
V
L
/V  
B
3
L
L
/MONO  
/ MONO  
R
C
R
R
R
2
To video  
output  
To audio  
output  
To RF  
output  
1
VCR  
To antenna input  
4
Preparation  
4 Connecting other devices  
If you are not connecting any other devices, skip step 4 and perform step 5.  
Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the  
headphones, the TV speakers go off.  
The OUTPUT terminal outputs the video and sound signals which you are viewing on the TV.  
You can dub them onto the VCR connected to the OUTPUT terminal.  
(The OUTPUT terminal cannot output component video signals. Also it cannot output any  
signals when the TV is turned off.)  
Connect components outputting a component signal (Y/CB/CR signal), such as a DVD player, to  
the VIDEO-2 terminal, and set VIDEO-2 SET function to COMPONENT. (See page 13.)  
The following illustrations are for the AV-29W33. Your TVs front and rear pannels may not look  
exactly like the illustrations.  
Front  
Camcorder or TV game  
V
L/MONO  
R
IN (VIDEO-3)  
Headphones  
Rear  
COMPONENT  
VIDEO-1  
INPUT  
(
)
VIDEO-2  
INPUT  
OUTPUT  
VCR (for playing)  
DVD player  
(composite signals)  
V
Y
V
L
/V  
V
L
C
B
L
/ MONO  
/ MONO  
VCR (for recording)  
R
C
R
R
R
R
DVD player  
(component video signals)  
5 Connect the power cord to the AC outlet  
Operate only from the power source indicated on the rear of the TV.  
5
Preparation  
6 Initial setting  
When the TV is first turned on, it enters the initial setting mode, and the JVC logo is  
displayed. Follow the instructions on the on-screen display to perform the initial  
settings.  
1 Press the Main power button  
on the TV.  
The POWER lamp lights. After the JVC  
logo has been displayed, the TV  
automatically switches to the language  
POWER lamp Main power button  
setting mode.  
COLOR  
CINEMA  
SYSTEM  
SURROUND  
ECO  
SENSOR  
DISPLAY  
DISPLAY  
button  
MENU  
AUTO CH PRESET  
CHANNEL SKIP  
LANGUAGE  
3
MENU t  
buttons  
MENU  
MENU  
/
ENGLISH  
CLOSE  
MTS STEREO  
SAP MONO  
buttons  
CAPTION  
TV/VIDEO  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
1
4
2
5
3
6
OFF  
TIMER  
The JVC logo does not appear if your TV  
has been turned on once before. In this  
case, use the LANGUAGE and AUTO CH  
PRESET functions to perform the initial  
settings. For details, see page 13 and 14.  
/
2 Press the MENU  
buttons to select language.  
3 Press the MENU T buttons to select AUTO CH PRESET.  
/
4 Press the MENU  
buttons.  
The sub-menu is displayed.  
TUNER MODE:CABLE AIR  
START  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
5 Press the MENU  
buttons to select CABLEor AIR.  
6 Press the MENU T buttons to select START.  
/
7 Press the MENU  
buttons to start the AUTO CH PRESET function.  
>>>ON SEARCHis displayed on the screen.  
When all the TV channels that can be received on your TV have been preset, the  
display goes out and the AUTO CH PRESET function operation is completed.  
/
To stop the AUTO CH PRESET function, press the MENU  
buttons.  
6
Basic operation  
The illustration below is for the remote control  
RM-C1019 supplied with L33 and W33 series  
models. Your remote control may not look ex-  
actly like the illustrations.  
1 Press the POWER button to turn  
your TV on.  
If your TV does not turn on, press the Main  
power button on the TV then press the  
POWER button again.  
You can also turn on your TV by pressing  
any of the following buttons;  
- the CHANNEL m button  
POWER  
MUTING  
- the TV/VIDEO button  
COLOR  
CINEMA  
SURROUND  
SYSTEM  
2 Select a channel.  
ECO  
SENSOR  
DISPLAY  
I Press the CHANNEL m button.  
Up/down selection cannot be selected for  
channels to which the CHANNEL SKIP  
function has been set to YES. See page  
14.  
MENU  
CLOSED  
CAPTION  
TV/VIDEO  
I Press the Number buttons to enter  
the channel number.  
When you want to select a channel num-  
ber over 100, enter the two-digit number  
after pressing the 100+ button.  
1
4
7
2
5
8
0
3
6
OFF  
TIMER  
PICTURE  
MODE  
9
CHANNEL  
SCAN  
RETURN+  
100+  
3 Press the VOLUME M button to  
CHANNEL  
VOLUME  
adjust the sound.  
4 To turn your TV off, press the  
POWER button.  
We recommend that you press the Main  
power button on the TV to turn the main  
power off if you do not plan to use your TV  
for a long time or if you wish to save energy.  
RM-C1019  
TV  
Viewing Images from an External  
Device:  
Press the TV/VIDEO button to select the  
VIDEO mode.  
You can also use the INPUT function to select  
the VIDEO mode. For details, refer to page 11.  
If the picture is not clear:  
Press the COLOR SYSTEM button to select  
another color system, see page 8.  
Color system cannot be changed in TV mode.  
7
Remote control buttons and functions  
ECO SENSOR button  
BASS button  
You can adjust this TV so that the screen  
automatically adjusts to the optimum  
contrast according to the brightness of your  
room. This function reduces eye strain and  
the power consumption of this TV.  
< AV-21W33B/AV-25L33B/AV-29W33B only >  
You can enjoy a powerful bass sound by  
using the SUPER BASS (Bass Reflex)  
function.  
Press this button to turn the SUPER  
BASS function on or off.  
Press this button to select the desired  
mode.  
To use this function, you must first mount the  
Twin Port Bass Blaster Unit packaged with the  
TV on top of the TV. For details, see page 16.  
DIGITAL ECO SENSOR DISPLAY:  
The ECO SENSOR function switches on. In  
this mode, the clover mark indicating the  
brightness of your room is displayed for  
several seconds each time the brightness  
changes. The number of clover marks  
displayed on screen increases as your room  
becomes darker.  
OFF TIMER button  
You can set the TV to automatically turn off  
after a set time.  
Press this button to select the period of  
time.  
You can set the period of time to a maximum of  
120 minutes in 10 minute increments.  
DIGITAL ECO SENSOR:  
The ECO SENSOR function switches on.  
However, in this mode, the clover mark will  
not be displayed.  
1 minute before the OFF TIMER function turns  
off the TV, GOOD NIGHT!appears.  
DIGITAL ECO SENSOR OFF:  
The ECO SENSOR function switches off.  
To display the remaining time, press this  
button once.  
PICTURE MODE button  
You can select one of three picture  
adjustment settings as you like.  
To cancel the OFF TIMER function, press  
this button to set the period of time to 0.  
The OFF TIMER function will not turn off the  
Press this button to select a mode.  
TVs main power.  
BRIGHT:  
Heightens contrast and sharpness.  
COLOR SYSTEM button  
If the picture is not clear or no color  
appears, change the current color system  
to another color system.  
Press this button to select the color  
system.  
STANDARD:  
Standardizes picture adjustments.  
SOFT:  
Softens contrast and sharpness.  
Pressing this button returns all the picture set-  
tings in MENU 4to their default settings.  
In TV mode:  
NTSC3.58 (fixed)  
In VIDEO mode:  
CLOSED CAPTION button  
If they are included in a program, you can  
view closed captions or text information.  
NTSC3.58  
NTSC4.43  
AUTO  
PAL  
Press this button to select the mode.  
AUTO:  
OFF  
CLOSED CAPTION  
TEXT  
Automatic color system selection  
If the picture is abnormal in the AUTO mode,  
change the AUTO mode to another color system.  
To change caption or text channels see page 12.  
Only in VIDEO mode, COLOR SYSTEMis  
displayed in MENU 2 and can be changed.  
8
Remote control buttons and functions  
CHANNEL SCAN button  
RETURN + button  
You can set a channel you frequently view  
to the Return Channel and you can view  
that channel at any time with one-touch.  
You can quickly view all TV channels  
programs that you can view on your TV,  
and search for the program you want to  
view.  
To set the channel to the Return  
Channel:  
1 Press this button to start scanning  
TV channels.  
1 Select the channel you want to set  
to the Return Channel.  
The TV channel programs are each  
displayed for several seconds.  
2 Press this button and hold until the  
message RETURN PLUS  
The programs of TV channels for which  
the CHANNEL SKIP function is set to YES”  
are not displayed.  
PROGRAMMED!appears.  
2 When you find the program you  
want to view, press this button again  
to stop scanning.  
When you turn off the TV, the Return Chan-  
nel setting is cancelled.  
To view the Return Channel:  
Press this button.  
You can view two channels (current channel  
and Return Channel) alternately by pressing this  
button.  
CINEMA SURROUND button  
You can enjoy an enhanced sound for a  
wider audience by using CINEMA  
SURROUND function.  
Press this button to select one of the  
CINEMA SURROUND mode.  
To cancel the Return Channel setting:  
Press this button and hold until the  
messageRETURN PLUS CANCELLED!”  
appears.  
HIGH/LOW:  
If no channel is set to the Return  
Channel:  
You can view the channel selected right  
before the current channel by pressing  
this button.  
When you listen to the stereo sound,  
please select HIGH mode or LOW mode.  
You can enjoy the sound for a wider  
audience similar to the experience at the  
theatre.  
In case that you setting up the CINEMA SUR-  
ROUND function to HIGH mode, there may be  
slight volume distortion. In case that occurs,  
please switch the HIGH mode to LOW mode,  
the effect of CINEMA SURROUND functions will  
be less noticeable, however, the volume distor-  
tion will be corrected.  
DISPLAY button  
You can continuously display the current  
channel number or VIDEO mode on the  
screen.  
Press this button.  
To turn the display off, press this button  
again.  
MONO SURROUND:  
Select the MONO SURROUND mode,  
when you listen to the mono sound.  
You can enjoy the sound for a wider  
audience similar to stereo sound.  
When selecting a VIDEO mode with no signal,  
indication of the VIDEO mode becomes fixed  
on the screen.  
OFF:  
The CINEMA SURROUND function  
switches off.  
MUTING button  
You can turn the sound off instantly.  
Press this button.  
To turn the sound on, press this button  
again.  
9
Using the TVs menus  
This TV has a number of functions you can operate using the menus. To use all your TVs  
functions fully, you need to understand how to use the menus.  
/
4 Press the MENU  
buttons to  
change function settings.  
COLOR  
CINEMA  
SYSTEM  
SURROUND  
ECO  
Example:  
SENSOR  
DISPLAY  
DISPLAY  
button  
Changes the AUTO  
SHUTOFF setting.  
MENU t  
buttons  
MENU  
MENU  
/
CLOSE  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
buttons  
CAPTION  
ON  
OFF  
ON  
OFF  
OFF  
ON  
TV/VIDEO  
VIDEO-2 SET COMPONENT  
1
4
2
5
3
6
VIDEO-2 SET COMPONENT  
OFF  
TIMER  
SELECT BY  
EXIT BY  
DISPLAY  
SELECT BY  
EXIT BY  
DISPLAY  
OPERATE BY -+  
OPERATE BY -+  
With some functions, the operation method  
may differ.  
I Basic operation  
5 Press the DISPLAY button to turn  
the display off.  
1 Press the MENU T buttons.  
One of the 5 menus is displayed.  
To operate a menu using the buttons on  
the front panel of the TV, refer to  
Operating menuson page 18.  
MENU number  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
TV  
ON  
ON  
The icon  
on the  
left indicates the  
currently selected  
function.  
00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Repeatedly press the MENU T  
buttons to display a desired  
menu.  
If you hold down the y button, the next  
menu is displayed.  
If the selected function is on the first line,  
pressing the r button displays the preced-  
ing menu.  
3 Repeatedly press the MENU T  
buttons to select a desired  
function.  
10  
Using the TVs menus  
INPUT  
VNR  
You can view images from VCRs or other  
devices connected to your TV.  
You can reduce picture noise.  
1 Press MENU T to display the  
1 Press MENU T to display the  
MENU 1menu, then select  
INPUT.  
MENU 1menu, then select VNR.  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
TV  
ON  
ON  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
TV  
ON  
ON  
00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
00  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
2 Press MENU  
to select ON.  
To cancel the VNR function, select OFF.  
/
2 Press MENU  
to select the  
VIDEO-1, VIDEO-2or VIDEO-3”  
mode.  
COMPRESS (16:9)  
This function converts a normal picture (4:3  
aspect ratio) into a wide picture (16:9 aspect  
ratio).  
TV mode changes to VIDEO mode.  
To return to TV mode, repeat step 1 and  
2 and set to TV mode.  
Use for pictures with a 16:9 aspect ratio that  
have been squeezed into a normal picture  
(4:3 aspect ratio), to restore their original  
dimensions.  
PICTURE TILT  
< AV-29W33 and AV-29W33B only >  
1 Press MENU T to display the  
MENU 1menu, then select  
COMPRESS (16:9).  
There are cases where the Earths magnetic  
force may make the picture tilt. If this  
happens, you can correct the picture tilt.  
MENU  
1
1 Press MENU T to display the  
MENU 1menu, then select  
PICTURE TILT.  
INPUT  
VNR  
TV  
ON  
ON  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
00  
MENU  
1
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
INPUT  
VNR  
TV  
ON  
ON  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
00  
/
2 Press MENU  
to select ON.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
2 Continue pressing MENU  
the picture becomes level.  
until  
To cancel the COMPRESS (16:9) function,  
select OFF.  
11  
Using the TVs menus  
CLOSED CAPTION  
You can view closed captions or text  
information.  
BLUE BACK  
You can mute the sound and change the  
picture into a blue screen while no signals  
are received by the TV, or when the signals  
are unstable.  
1 Press MENU T to display the  
MENU 1menu, then select CLOSED  
CAPTION.  
1 Press MENU T to display the  
MENU 2menu, then select BLUE  
BACK.  
MENU  
1
INPUT  
VNR  
COMPRESS(16:9)  
CLOSED CAPTION  
PICTURE TILT  
TV  
ON  
ON  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
00  
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
VIDEO-2 SET COMPONENT  
/
2 Press MENU  
.
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
The sub-menu is displayed.  
CAPTION:CC1 CC2 CC3 CC4  
/
2 Press MENU  
to select ON.  
TEXT  
:T1 T2 T3 T4  
To cancel the BLUE BACK function, select  
OFF.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To view a broadcast even when the recep-  
tion signal is poor, set the BLUE BACK func-  
tion to OFF.  
3 Press MENU T to select  
Even when the BLUE BACK function is set  
to OFF, the sound may not be audible.  
CAPTIONor TEXT.  
/
4 Press MENU  
to select the caption  
or text channel.  
AUTO SHUTOFF  
You can set your TV to turn off if no signals  
are received for about 15 minutes or longer  
after the end of a broadcast.  
CHILD LOCK  
You can disable the front control buttons of  
the TV.  
When this function is set to ON, the TV can  
be operated using only the remote control.  
Use this function to prevent children from  
operating the TV without parental consent.  
1 Press MENU T to display the  
MENU 2menu, then select AUTO  
SHUTOFF.  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
1 Press MENU T to display the  
MENU 2menu, then select CHILD  
LOCK.  
ON  
ON  
ON  
VIDEO-2 SET COMPONENT  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
ON  
ON  
ON  
VIDEO-2 SET COMPONENT  
/
2 Press MENU  
to select ON.  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
To cancel the AUTO SHUTOFF function,  
select OFF.  
/
2 Press MENU  
to select ON.  
The AUTO SHUTOFF function does not turn  
off the TVs main power.  
To cancel the CHILD LOCK function, select  
OFF.  
The CHILD LOCK function is canceled when you  
turn the power off.  
The AUTO SHUTOFF will not work for a  
VIDEO mode.  
12  
Using the TVs menus  
VIDEO-2 SET  
AUTO CH PRESET  
Set the VIDEO-2 SET correctly according to  
the video signal input from the external  
device connected to the VIDEO-2 terminal.  
If this setting is incorrect, images will not  
be displayed.  
You can automatically preset all TV channels  
that can be received by your TV to channels.  
1 Press MENU T to display the  
MENU 3menu, then select AUTO  
CH PRESET.  
1 Press MENU T to display the  
MENU 2menu, then select  
VIDEO-2 SET.  
MENU  
AUTO CH PRESET  
CHANNEL SKIP  
LANGUAGE  
3
ENGLISH  
MTS STEREO  
SAP MONO  
MENU  
AUTO SHUTOFF  
CHILD LOCK  
BLUE BACK  
2
ON  
ON  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
VIDEO-2 SET COMPONENT  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
2 Press MENU  
.
The sub-menu is displayed.  
2 Set the VIDEO-2 SET according to  
the video signal input from the  
VIDEO-2 terminal.  
TUNER MODE:CABLE AIR  
START  
If a normal video signal (composite  
video signal) is input:  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
Press the MENU  
VIDEO.  
buttons to select  
/
3 Press MENU  
to select CABLE”  
If a component video signal (Y/CB/CR  
signals) is input:  
or AIR.  
/
Press the MENU  
COMPONENT.  
buttons to select  
4 Press MENU T to select START.  
/
5 Press MENU  
to start the AUTO  
CH PRESET function.  
>>>ON SEARCHis displayed on the  
screen.  
When all the TV channels that can be  
received on your TV have been preset,  
the display goes out and the AUTO CH  
PRESET function operation is completed.  
To stop the AUTO CH PRESET:  
/
Press the MENU  
button.  
13  
Using the TVs menus  
CHANNEL SKIP  
LANGUAGE  
You can set undesired channels to be  
skipped. Channels set to be skipped cannot  
be selected by the CHANNEL m buttons  
nor the CHANNEL SCAN button.  
You can select the language for the on-screen  
display.  
1 Press MENU T to display the  
MENU 3menu, then select  
LANGUAGE.  
1 Press MENU T to display the  
MENU 3menu, then select  
CHANNEL SKIP.  
MENU  
3
AUTO CH PRESET  
MANUAL CH PRESET  
MENU  
AUTO CH PRESET  
CHANNEL SKIP  
LANGUAGE  
3
LANGUAGE  
ENGLISH  
MTS STEREO SAP MONO  
ENGLISH  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
MTS STEREO  
SAP MONO  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
2 Press MENU  
language.  
to select  
The on-screen display indications are in  
the selected language.  
/
2 Press MENU  
.
The sub-menu is displayed.  
SKIP  
EXIT  
NO  
MTS  
CH 002 VL  
< Stereo model only>  
SELECT BY CH -+ EXIT BY  
OPERATE BY VOL -+ DISPLAY  
You can select a MTS (Multi-Channel  
Television Sound) setting for stereo, mono  
and SAP (Second Audio Programs).  
3 Press CHANNEL M to select the  
channel you want to skip.  
1 Press MENU T to display the  
MENU 3menu, then select MTS.  
4 Press VOLUME M to select YES.  
MENU  
AUTO CH PRESET  
CHANNEL SKIP  
LANGUAGE  
3
The channel is set to be skipped.  
To cancel the CHANNEL SKIP function,  
select NO.  
ENGLISH  
MTS STEREO  
SAP MONO  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
5 Repeat steps 3 and 4 if you want to  
set another channel to skip.  
/
2 Press MENU  
mode.  
to select the  
To turn the display off:  
1 Press MENU y to select EXIT.  
Select MONOto reduce excess noise in a  
program or channel.  
SKIP  
EXIT  
NO  
CH 002 VL  
SELECT BY CH -+ EXIT BY  
OPERATE BY VOL -+ DISPLAY  
2 Press VOLUME m to turn the  
display off.  
14  
Using the TVs menus  
Picture Adjustments  
AI VOLUME  
You can adjust the picture as you like.  
You can prevent the sudden increase or  
decrease of volume that occurs when  
changing channels or switching VIDEO  
modes.  
1 Press MENU T to display the  
MENU 4menu.  
MENU  
4
TINT  
COLOR  
BRIGHT  
PICTURE  
DETAIL  
1 Press MENU T to display the  
MENU 5menu, then select  
AIVOLUME.  
MENU  
5
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
BASS  
TREBLE  
BALANCE  
AI VOLUME  
ON  
2 Press MENU T to select an item  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
/
and press MENU  
to adjust it.  
TINT*  
- : Reddish  
- : Lighter  
- : Darker  
- : Lower  
- : Softer  
+ : Greenish  
+ : Deeper  
+ : Brighter  
+ : Higher  
+ : Sharper  
COLOR  
BRIGHT  
PICTURE  
DETAIL  
/
2 Press MENU  
to select ON.  
To cancel the AI VOLUME function, select  
OFF.  
*TINT (tint) is displayed only when viewing  
images from NTSC 3.58 or NTSC 4.43 color  
systems.  
The AI VOLUME function may not operate as  
expected if the sound input level from a broad-  
cast station (or video software) is extremely low.  
The AI VOLUME function for TV mode and  
VIDEO mode can be set separately. For example,  
you can set it to be off in TV mode and on in  
VIDEO mode. If you set the AI VOLUME func-  
tion while viewing a TV channel, the setting is  
registered as the setting for TV mode. If you set  
the AI VOLUME function while viewing images  
from a VIDEO terminal, the setting is registered  
as the setting for VIDEO mode.  
Sound Adjustments  
You can adjust the sound as you like.  
1 Press MENU T to display the  
MENU 5menu.  
MENU  
5
BASS  
TREBLE  
BALANCE  
AI VOLUME  
ON  
SELECT BY  
OPERATE BY -+  
EXIT BY  
DISPLAY  
2 Press MENU T to select an item  
/
and press MENU  
to adjust it.  
TREBLE  
BASS  
BALANCE  
- : Weaker  
- : Weaker  
- : Left  
+ : Stronger  
+ : Stronger  
+ : Right  
15  
Attaching the Twin Port Bass  
Blaster Unit  
<AV-21W33B/AV-25L33B/AV-29W33B only>  
The Twin Port Bass Blaster Unit is packaged together with the TV. Before you use the TV,  
mount the unit correctly on the TV.  
Note:  
The SUPER BASS functions do not work unless the Twin Port Bass Blaster Unit is connected correctly  
to the TV. For details on the SUPER BASS functions, see page 8.  
CAUTION:  
The Twin Port Bass Blaster Unit is just placed on top of the TV and is not held in place by a screw.  
When you use the unit, pay attention to the following cautions. Otherwise, the unit or TV may fall over  
and be damaged, or cause unexpected injury.  
- Do not rest your hands or elbows on the unit.  
- Do not move the TV with the Twin Port Bass Blaster Unit mounted on top of the TV. Before you move  
the TV, be sure to remove the unit.  
- Do not move the TV by holding the Twin Port Bass Blaster Unit.  
1 Place the unit on top of the TV  
Twin Port Bass Blaster Unit  
making sure that the mounting pin  
on the bottom of the Twin Port Bass  
Blaster Unit fits into the mounting  
hole on the top of the TV.  
When you mount the unit, make sure that  
the mounting pin fits properly into the  
mounting hole. Otherwise, it may slide off  
the top of the TV. This may cause damage or  
cause unexpected injury.  
2 Firmly insert the Twin Port Bass  
Blaster Unit connector into the  
BASS SPEAKER OUT terminal.  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
V
Y
C
V
L
/V  
B
BASS  
SPEAKER  
OUT  
L
L
/MONO  
/ MONO  
R
C
R
R
R
16  
TV buttons and parts  
Front  
<AV-29W33 and AV-29W33B >  
1
2
3 4  
5
6
8
7
9
0
V
L/MONO  
R
IN (VIDEO-3)  
<AV-25L33 and AV-25L33B>  
1
2
3
4
5
7
0
8
9
<AV-21W33 and AV-21W33B>  
1
3
4
5
7
8
9
0
2
POWER  
MENU  
CHANNEL  
VOLUME  
EXIT  
V
L/MONO  
IN (VIDEO-3)  
R
1 Headphone jack  
2 VIDEO-3 terminal  
3 MENU button  
6 TV/VIDEO button  
7 ECO sensor  
8 Remote control sensor  
9 POWER lamp  
4 CHANNEL m buttons  
5 VOLUME m buttons  
0 Main power button  
Rear  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
1 VIDEO-1 INPUT terminal  
2 COMPONENT (VIDEO-2)  
INPUT terminal  
V
Y
C
V
L
/V  
B
L
L
/MONO  
/ MONO  
3 OUTPUT terminal  
4 Antenna socket  
R
C
R
R
R
1
2
3
4
17  
Using the buttons on the TV  
Basic operation  
Operating menus  
Check to make sure the CHILD LOCK function  
is set to OFF. When the CHILD LOCK function  
is set to ON, the TV cannot be operated using  
the front control buttons. For details, see CHILD  
LOCKon page 12.  
You can operate functions in menus using  
the front control buttons on the TV.  
1 Press MENU y to display a menu.  
2 Press MENU y repeatedly to display  
1 Press CHANNEL M to turn the TV  
the menu you want to use.  
on from standby mode.  
3 Press MENU y to select the desired  
2 Press CHANNEL M to select a  
function or item.  
channel.  
3 Press VOLUME M to adjust the  
/
4 Press MENU  
or VOLUME M to  
volume.  
carry out the desired operation.  
For details, see the description for each  
function.  
4 To turn your TV off, press the Main  
power button to turn off the TVs  
main power.  
5 Press VOLUME M to turn the menu  
display off.  
To change the TV mode to the VIDEO  
mode:  
Press the TV/VIDEO button if the TV has  
one. See page 7.  
If the TV has no TV/VIDEO button,  
select the VIDEO mode with the INPUT  
function in MENU 1.  
18  
Troubleshooting  
If there is no picture or the TV does not operate normally, make sure the problem isnt due to  
the reasons indicated below.  
If the problem persists even after taking the measures indicated, please contact a service  
technician.  
Cannot turn the TV on  
Poor picture  
Press the Main power button on the TV.  
Press the COLOR SYSTEM button to select  
another color system. (see page 8.). However,  
color system cannot be changed in TV mode.  
Connect the power cord to the AC outlet.  
Adjust the picture settings. (see page 15.)  
The screen turns blue  
Is a component signal output device, such as a  
DVD player, connected correctly? (see page 5.)  
Is the BLUE BACK function on? (see page 12.)  
Is the VIDEO-2 SETfunction setting correct?  
(see page 13.)  
Remote control inoperable  
If noise (snow) totally blocks out the picture,  
check the following.  
Replace the batteries. (see page 3.)  
- Have the TV and antenna been connected prop  
erly?  
Buttons on front of the TV do not work  
- Has the antenna cable been damaged?  
- Is the antenna pointing in the right direction?  
- Is the antenna itself faulty?  
Switch the CHILD LOCK function off. (see page  
12.)  
If the TV or antenna suffer interference from  
other equipment, stripes or noise may appear  
in the picture. Move any equipment which can  
cause interference away from the TV.  
TV does not respond immediately  
Press the main power button on the TV to turn  
off the main power. Press the main power but-  
ton again to turn on the TV. If the TV returns to  
a normal state, operation is normal.  
If the TV or antenna suffer interference from  
signals reflecting from mountains or buildings,  
double-pictures (ghosting) will occur. Change  
the antennas direction or replace it with an  
antenna with better directionality.  
The TV turns off suddenly  
When a white and bright still image (such as a  
white dress) is displayed on the screen, the  
white part may look as if it is colored. When  
the image disappears from the screen, the  
unnatural colors will also disappear.  
Is the OFF TIMER function set to operate? (see  
page 8.)  
Is the AUTO SHUTOFF function on? (see page  
12.)  
The picture is tilted  
Poor sound  
< AV-29W33 and AV-29W33B only >  
Adjust the sound settings. (see page 15.)  
A picture may be tilted due to the influence of  
the earths magnetism. In this case, use the PIC-  
TURE TILT function to adjust the tilt. (see page  
11.)  
Screen is 80% black  
Press the CLOSED CAPTION button to select  
OFF. (see page 8.)  
19  
Specifications  
TV RF systems  
M, N  
Color systems  
NTSC 3.58 (in TV mode only)  
NTSC 3.58/NTSC 4.43, PAL (in VIDEO mode only)  
Channels  
VHF low channel (VL), VHF high channel (VH), UHF channel (U)  
Receives cable channels in mid band, super band and hyper band.  
External input / output  
VIDEO-1:  
VIDEO input, AUDIO L/R input  
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input,  
COMPONENT VIDEO (Y/CB/CR) input  
VIDEO-3:  
VIDEO input, AUDIO L/R input  
VIDEO output , AUDIO L/R output  
stereo mini jack (3.5 mm diameter)  
OUTPUT:  
Headphone jack:  
Sound-multiplex systems < Stereo models only >  
MTS (Multi-Channel Television Sound)  
Design and specifications subject to change without notice.  

IBM 8315 User Manual
Indesit KD6C8E User Manual
Intel Core I5 Dual Core I5 3470t 2 9ghz CM8063701159502 User Manual
Marantz DVD Recorder CD Recorder User Manual
Maytag MGC6536BDW User Manual
NEC Electronics America Computer Monitor LCD1970VX User Manual
Panasonic Cordless Telephone KXTG7875S User Manual
Panasonic CT 20SL13 User Manual
Panasonic CT 32E13 User Manual
Panasonic DIGA DMR ES10 User Manual