JVC AV 21SX17 User Manual

ENGLISH

COLOUR TELEVISION

INSTRUCTIONS

AV-29QS27 AV-21QS27

AV-29QX17 AV-21QX17

AV-29QX17B AV-21QX17B

AV-29QX27

AV-29RS28

AV-29RX18

AV-29RX58

AV-29RX78

AV-29SS27

AV-29SX17

AV-29SX57

AV-29SX77

AV-29SX78

AV-21QX27

AV-21RS28

AV-21RX18

AV-21RX58

AV-21RX78

AV-21SS27

AV-21SX17

AV-21SX57

AV-21SX77

This illustration shows AV-29SX77.

The illustrations of AV-29SX77 is used in this instruction manual for explanation

purpose. Your TV may not look exactly the same as illustrated.

GGT0153-001C-H

Knowing your TVʼs features

Contents

Please see the chart below and check the function are equipped for your TV's model number.

The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not

available for your TV, it does not work and the logo "Ø" appears on the screen.

Knowing your TVʼs features...................3

Connections ..........................................4

Initial settings.........................................5

Remote control buttons and basic

function s ................................................6

TV buttons and functions.......................7

Operating the menus.............................7

Model No.

Function

•

–

I/II (STEREO/I II)

†

PIP control buttons

(Green label)

•

–

TELETEXT control buttons

(Black label)

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

PICTURE TILT

MaxxBass

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

–

•

Picture setting........................................9

Picture in picture (PIP) operation ........10

Teletext operation................................11

Sound setting ......................................11

Customized settin g ..............................13

TV channel presetting .........................15

•

AI ECO SENSOR

ECO MODE

–

Features

Descriptions

Just connect DVD player to the television. The television will detect DVD signal and

DVD MENU

display picture on the screen automatically and you can adjust pictures and sound while

you are watching DVD as your desire. When disconnect DVD player, the television will

display the previous channel.

MaxxBass

MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be

heard by our ears.

PIP (Picture in Picture)

TELETEXT

You can view two screens (Main picture and Sub picture) at the same time.

You can view teletext programmes which are broadcasted by some TV channels. Teletext

programme is an information in text form.

Troubleshooting...................................17

Specifications ......................................18

FAVORITE CH (Channel)

A2/NICAM

You can register up to four favorite channels for quick recall with one press.

You can listen to the stereo sound or bilingual sound from TV programme broadcasting

by A2 or NICAM Sound-multiplex system.

(STEREO / I II)

†

AI ECO SENSOR

ECO MODE

AI VOLUME

TINT

TV detects the brightness of your room and automatically adjust the picture brightness to

a suitable level for a better eyecare.

You can adjust TV screen contrast according to the brightness of your room to suitable

level for a better eyecare.

TV adjusts the volume automatically for all TV channels to avoid sudden change of the

volume when selecting different TV channels or selecting Video Mode.

You can adjust TINT setting for all colour systems, including PAL.

Note : Some functions written in this instruction manual may not be available for your TV.

Connections

The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.

CAUTION

Ensure to turn off all equipments including the TV before connecting the AC mains plug to the AC outlet.

Connecting to the rear component/video

input terminal and output terminal

Connecting to the aerial cable and VCR

VHF/UHF

outdoor

aerial

TV rear terminals

VCR (for playing)

DVD player

(composite signals)

75-ohm

coaxial cable

(not supplied)

VCR (for recording)

DVD player

(with component

video signals

input)

(Connect

directly if not

using a VCR)

• When connecting to COMPONENT (VIDEO-2) input,

depending on the connection, choose the appropriate

video input using the menu (\ page 14).

Connecting to the front video input terminal

Camcorder or TV game

Aerial cable

RF output

Rear of VCR

(Connect via a VCR)

Audio output

RF input

Headphones

Video output

S-video output

After all the connections have been made,

insert the mains plug to the AC outlet.

Initial settings

Searching for the channels (AUTO PROGRAM)

Turn on the TV

AUTO PROGRAM

or wait 15 seconds to

run Setup Tour

22%

OK / : EDIT

JVC logo appears

To stop or wait until AUTO PROGRAM

finishes

Select a language^❇

��

Select

��

Edit the channel list

��

�

��

�

��

To edit the

channel list,

\ page 15.

Confirm

To complete

Setup Tour

��

�

��

Select the Teletext language group^❇

TTEEXXTT LLAANNGGUUAAGGEE

For details,

\ page 11.

Select

GROUP–1

GROUP–2

GROUP–3

GROUP–4

To restart Setup Tour after above setup has completed

OK / : SELECT

DISPLAY : BACK

MENU : EXIT

(while the cursor is pointing to

PICTURE MODE and within 3

seconds)

Confirm and proceed to AUTO

PROGRAM

^❇This on screen of Language menu and Text Language menu are used

for explanation purpose only. Your TV may not show the same as this on

screen.

Remote control buttons and basic functions

Turn the TV on from standby and vice versa

• Insert two batteries by following the and

polarities and inserting the end first.

• Use AA/R6/UM-3 dry cell batteries.

• Iftheremotecontroldoesnotworkproperly,

fit new batteries. The supplied batteries are

for testing, not regular use.

Programme and recall 4 favourite channels

(colour buttons: red, green, yellow, blue)

Choose the TV channel you wish to programme

PROGRAMMED! ■

Press and hold

any button

If this symbol

is shown, it is

only valid in

the European

Union.

WARNING:

Batteries shall not be

exposed to excessive heat

such as direct sunshine,

ﬁre or the like.

Repeat to programme another favourite channel.

To recall the favourite channel, press the

corresponding colour button.

• When the TV is in Text function or MENU mode, the

favourite channel function is not available.

• When the TV is in PIP function, the favourite channel

function cannot be programmed but can recall the

favourite channel.

Operating the menus (\ page 7)

• Display the programme or video terminal number and

stereo/bilingual broadcast system.

• To return to the previous menu

TV or video terminal input selection, Exit from the menu

Turn the volume Off / On

RETURN PLUS function

Return to the frequently viewed channel.

Choose the channel you want to programme

Programme number selection

For two digits :

RETURN PLUS

PROGRAMMED!

Press and hold

To cancel

Adjust the volume level, Turn off Muting

Channel selection

Select the desired channel number.

RETURN PLUS

CANCELED!

Press and hold

RETURN function

If you have not set or have canceled the RETURN PLUS

channel, this will return to the previously viewed channel.

For Hyper Scan

PR changes without changing the

picture. Once you stop pressing

CHANNEL+ or CHANNEL– button,

picture will change to the desired PR.

Press and hold

TV buttons and functions

The illustration of AV-29SX77 is shown here for explanation purpose. Your TV may not look exactly the same as illustrated.

TV or Video terminal input selection,

Exit from the menu

Display the menu and exit after finish setting

Video and audio

input jacks for

VIDEO-3 mode

Channel selection, To select menu function

ECO sensor

TVʼs main power on/off

Volume level adjustment, To choose a Top

menu and adjust the desired menu function

Remote control sensor

Headphone jack

Power lamp - Indicates the TVʼs status.

No colour: TVʼs main power is being turned off.

Red: TVʼs main power is turned on.

Blink: While the TV is in standby mode, ON TIMER function is in used.

While the TV is in turn on mode, OFF TIMER function is in used.

Note: When you turn off the power switch while TV is in standby mode,

the power lamp will go off in 5-10 seconds. When you operate the

TV, POWER Lamp will blink.

Operating the menus

TOP menu

SET UP menu

2nd menu

3rd menu

EDIT

Example: MENU

EDIT/MANUAL

To display the To select a Top menu.

MENU.

To select a second menu.

To select for go to third

menu.

To select, adjust or

choose the setting of a

function.

To exit.

Select

When the cursor is at MENU.

To display

To return to

Select

other pages. the previous

menu.

Adjust

Depend to the on screen Depend to the on screen

guide. guide.

Operating the menus (continued)

You can use the DVD MENU by switch channel to VIDEO-2 or press the DVD MENU button on the remote control. See the menus location in the below table.

For RF / Video-1 / Video-3 (MENU)

3rd menu / Adjustments

For Video-2 (DVD MENU)

3rd menu / Adjustments

Top menu Page

2nd menu

PICTURE MODE

DVD THEATER STATUS set to OFF : USER / SHARP / CLEAR / VIVID / SOFT

DVD THEATER STATUS set to ON : USER / SHARP / CLEAR

USER / VIVID / SOFT

PICTURE

PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP / COLOUR / TINT

PICTURE MODE set to USER : CONTRAST / BRIGHT/ SHARP/

COLOUR / TINT

PICTURE MODE set to SHARP or CLEAR or SOFT or VIVID :

–

PICTURE SETTING

PICTURE MODE set to SOFT or VIVID:

–

DVD THEATER STATUS set to OFF : NORMAL / COOL / WARM

WHITE BALANCE

NORMAL / COOL / WARM

DVD THEATER STATUS set to ON :

–

DVD MENU

VNR

OFF / AUTO / MIN / MAX

PICTURE

(Only available in RF, VIDEO-1 and VIDEO-3)

AUTO SIGNAL DETECT

(Only available in VIDEO-2)

–

ON / OFF

DVD THEATER STATUS

(Only available in VIDEO-2)

–

STEREO /

II (Only available in RF)

/ I / II

12 AI VOLUME

ON / OFF

SOUND

12 SOUND MODE

USER / MUSIC / CINEMA / NEWS

USER / MUSIC / CINEMA / DRAMA

EQUALIZER (SOUND MODE set to USER

and CINEMA SURROUND set to OFF only)

Adjust the sound level of each frequencies.

DVD MENU

SOUND

12 BALANCE

Left Stronger / Right Stronger

ON / OFF

Left Stronger / Right Stronger

ON / OFF

11 CINEMA SURROUND

11 MaxxBass

OFF / HIGH / LOW

Set timer for turn on the TV

Set timer for turn off the TV

ON / OFF

OFF / HIGH / LOW

Set timer for turn on the TV

Set timer for turn off the TV

ON / OFF

14 ON TIMER

14 OFF TIMER

14 CHILD LOCK

COMPRESS (16:9 )

ON / OFF

FEATURES

DVD THEATER STATUS set to OFF : OFF / MODE-1 / MODE-2 / DISPLAY or

OFF / ECO-1 / ECO-2

AI ECO SENSOR or

ECO MODE

OFF / MODE-1 / MODE-2 / DISPLAY or

OFF / ECO-1 / ECO-2

DVD THEATER STATUS set to ON :

VIDEO / COMPONENT

ON / OFF

–

14 VIDEO-2 SETTING

BLUE BACK

VIDEO / COMPONENT

ON / OFF

10 PICTURE TILT

14 BEEP

Tilt the picture.

ON / OFF

15 AUTO PROGRAM

15 EDIT / MANUAL

MOVE / INSERT / DELETE / MANUAL

SET UP

ViDEO-2 SETTING set to COMPONENT : AUTO

ViDEO-2 SETTING set to VIDEO : AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43

COLOUR SYSTEM

AUTO / PAL / SECAM / NTSC3.58 / NTSC4.43

13 LANGUAGE

Select the languages.

11 TEXT LANGUAGE

Select the Text language.

* For DVD THEATER STATUS set to ON only

Picture setting

COLOUR SYSTEM

PICTURE MODE

You can select the appropriate colour system when the picture is not clear

or no colour appears.

AUTO → PAL → SECAM → NTSC3.58 → NTSC4.43

You can choose the desired picture setting with one-touch.

USER

You can change this picture setting (CONTRAST,

BRIGHT, SHARP, COLOUR, TINT) as you like.

(\ PICTURE SETTING)

To sharpen the picture.

You can also operate this function from the menu.

SHARP

VIVID

SET UP menu

COLOUR SYSTEM

Heightens contrast and sharpness.

Softens contrast and sharpness.

To soften the picture.

SOFT

For the colour system in each country or region, see the table below:

CLEAR

Area

Country or Region

System

You can also operate this function from the menu.

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,

Indonesia, Malaysia, Singapore, Thailand, India, China, Vietnam,

Hong Kong, etc.

PAL

PICTURE menu

PICTURE MODE

Asia,

Middle East

To return the USER setting to default, press the blue button when the

PICTURE SETTING menu is displayed.

See details for the location menus in "Operating the menus" \ Page 8.

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.

Philippines, Taiwan, Myanmar, etc.

Russia, etc.

SECAM

NTSC

SECAM

PAL

Europe

Oceania

Africa

Czech Republic, Poland, Germany, Holland, Belgium, UK, etc.

Australia, New Zealand, etc.

PICTURE SETTING

You can adjust the desired picture setting when selecting USER in

PICTURE MODE.

PAL

Republic of South Africa, Nigeria, etc.

Egypt, Morocco, etc.

PAL

SECAM

PICTURE menu

PICTURE MODE

USER

WHITE BALANCE

You can change the white balance of the picture to better match the type

of video being viewed.

PICTURE SETTING

CONTRAST 2 : Lower contrast

3 : Higher contrast

3 : Brighter

3 : Higher

3 : Deeper

3 : Greenish

PICTURE menu

WHITE BALANCE

BRIGHT

SHARP

COLOUR

TINT

2 : Darker

2 : Softer

2 : Lighter

2 : Reddish

NORMAL

COOL

Normal white balance

Bluish white

WARM

Reddish white

See details for the location menus in “Operating the menus” \ Page 8.

When DVD THEATER STATUS set to ON, WHITE BALANCE is not

available in VIDEO-2. \ Page 8.

BLUE BACK

COMPRESS (16:9)

You can set the TV to automatically change to a blue screen and mute the

sound if the signal is weak or absent, or when there is no input from an

antenna.

You can convert a normal picture (4:3 aspect ratio) into a wide picture

(16:9 aspect ratio).

(Choose ON or OFF)

FEATURES menu

BLUE BACK

FEATURES menu

COMPRESS (16:9)

This function is only available in RF mode.

Picture setting (continued)

Picture in picture (PIP) operation

You can display a sub picture within the main picture on the screen.

to display the sub picture.

AI ECO SENSOR (ECO)/ECO MODE

You can automatically adjust TV screen contrast according to the

brightness of your room.

You can hear the sound from the main picture only.

OFF

Cancel the function.

Mild contrast (recommended).

Even contrast.

When main picture and sub picture are the same TV channel:

MODE-1/ECO-1

MODE-2/ECO-2

Press SUB-P -/+

Press (Input)

Main picture will be changed TV channel follow as sub

picture.

DISPLAY (for Al ECO SENSOR only) Display the graphic of the function.

To change sub picture to video mode.

You can also operate this function from the menu.

Press CHANNEL -/+ Sub picture will be changed TV channel follow as Main

picture.

FEATURES menu

AI ECO SENSOR / ECO MODE

When DVD THEATER STATUS set to ON, Al ECO SENSOR / ECO

MODE is not available in VIDEO-2. \ Page 8.

Press CHANNEL -/+ Until main picture change to video mode.

To cancel, press the PIP button again.

Correcting the Slanting Picture (PICTURE TILT)

While a sub picture is being displayed, you can perform the following

functions.

You can correct the picture tilt caused by the earthʼs magnetic force.

Select the desired TV channel for sub picture.

(SUB-P)

FEATURES menu

PICTURE TILT

(Input)

(Swap)

Select the input source for the sub picture.

The following display appears.

PICTURE TILT

Swap between the main picture and sub picture.

(Position) Change the sub picture position.

lower right → lower left

upper right → upper left

Freeze the sub picture.

DISPLAY : BACK

MENU : EXIT

(Freeze)

When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub

picture.

When VIDEO-2 is set to component and if the input source of the main

picture is set to VIDEO-2 with component, PIP button is disabled and sub

picture cannot be displayed.

Tilt the picture

becomes level

To confirm

Teletext operation

Sound setting

MaxxBass

TELETEXT

You can watch the Teletext broadcast channel with TEXT function.

You can enjoy an enhanced bass sound which cannot be played by

normal speakers.

TV mode → TEXT twin mode → TEXT mode

OFF

MaxxBass is turned off.

MaxxBass effect is high.

MaxxBass effect is low.

HIGH

LOW

Selecting other Teletext pages.

You can also operate this function from the menu.

SOUND menu

MaxxBass

"MaxxBass" is a registered trademark of Waves Audio Ltd. in the USA,

Japan and other countries.

You can also operate the teletext using the following buttons:

to return to the TV mode.

CINEMA SURROUND

You can enjoy an enhanced sound for wider audience.

(Hold)

Hold a teletext page.

To cancel, press the button again.

OFF

Cancel the function.

Listen to sound with wider audience effect.

(Reveal)

Display the hidden text (example: answers to a quiz).

To cancel, press the button again.

Enlarge the teletext display.

You can also operate this function from the menu.

(Size)

(Index)

(Cancel)

SOUND menu

CINEMA SURROUND

Return to the index page instantly.

Watch TV programme while waiting for a teletext page.

When the teletext page is found, a page number appears at the

upper left of the screen.

EQUALIZER

Press the button to view the teletext page.

Sub-page numbers are displayed at the left of the screen.

To cancel sub-page function, press the button again.

You can adjust the sound level of each frequencies when selecting USER

mode in SOUND MODE.

(

Sub-page

)

SOUND menu

SOUND MODE

EQUALIZER

USER

TEXT LANGUAGE

You can set the Teletext language group that corresponds to the programmes.

Select and adjust the desired frequencies.

SET UP menu

TEXT LANGUAGE

��

GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian, Italian,

French, Spanish, Portuguese, Turkish

��

GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian, Rumanian

GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian

GROUP-4 English, Polish, French, Turkish, Arabic, Farsi

� � ��

��

Adjust high frequency will affect higher pitch sound and vice versa.

When CINEMA SURROUND set to ON, you cannot adjust EQUALIZER

(\ page 8).

Depending on the broadcast, the language set may not display properly

(\ page 5).

Sound setting (continued)

STEREO / I II (

I/II)

AI VOLUME

You can enjoy the stereo and bilingual broadcasted programmes.

You can adjust the volume of all the channels and video inputs to the

same level automatically depends on the strength of signal of the sources.

Select stereo sound.

(Choose ON or OFF)

AI VOLUME

SOUND menu

Select monaural sound.

Select bilingual I (sub I).

SOUND SYSTEM

Select bilingual II (sub II).

This function is only available in RF mode.

You can also operate this function from the menu.

You can select an appropriate sound system when abnormal sound

occurs even when the picture appears normal.

STEREO/I II

SOUND menu

†

B/G → I → D/K → M

BALANCE

This function is not available in video mode.

For the sound system in each country or region, see the table below:

You can adjust the volume balance between the left and right speakers.

Area

Country or Region

System

SOUND menu

BALANCE

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen,

Indonesia, Malaysia, Singapore, Thailand, India, etc.

B/G

China, Vietnam, etc.

D/K

Asia,

Middle East

SOUND MODE

Hong Kong, etc.

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.

Philippines, Taiwan, Myanmar, etc.

Russia, Czech Republic, Poland, etc.

Germany, Holland, Belgium, etc.

UK, etc.

B/G

You can choose the desired sound setting.

USER

Change the sound setting as you like.

Select USER and adjust the frequencies in EQUALIZER

D/K

B/G

Europe

(100, 300, 1K, 3K, 8K Hz), \ page 11.

MUSIC

CINEMA

NEWS

Emphasize on music effect.

Emphasize on movie sound.

Emphasize on vocal sound.

Emphasize on drama sound.

Oceania

Africa

Australia, New Zealand, etc.

Republic of South Africa, etc.

Nigeria, Egypt, Morocco, etc.

B/G

DRAMA

You can also operate this function from the menu.

SOUND menu

SOUND MODE

When SOUND MODE is set to other than USER, EQUALIZER function

becomes unavailable.

See details for location menus in "Operating the menus" \ Page 8.

Customized setting

AUTO SIGNAL DETECT

VNR

When the DVD input signal is detected, the input mode will automatically

change to VIDEO-2 and when the DVD input signal is not detected, the

input mode will automatically change to RF previous input mode.

DVD players: Press the “POWER ON” button on the player for signal

detection.

You can reduce the picture noise.

PICTURE menu

VNR

OFF

VNR is turned off.

AUTO

MIN

Effect of VNR is automatically controlled.

Effect of VNR becomes minimum level.

Effect of VNR becomes maximum level.

VCRs: Press the “POWER ON” button on the device, followed by the

“PLAY” button, signal detection and DVD menu display.

MAX

��

AUTO SIGNAL

DETECT

If you select MAX, the picture becomes softer even if the original picture

is sharp.

Only available in RF, VIDEO-1 and VIDEO-3. \ Page 8.

DVD MENU PICTURE

(Choose ON or OFF)

Only available in VIDEO-2 mode. \ Page 8.

LANGUAGE

DVD THEATER STATUS

You can choose the desired on screen display language.

You can enjoy an enhanced picture quality for movie playback in a dark

room, like watching a movie in the theater.

SET UP menu

LANGUAGE

��

DVD THEATER

DVD MENU PICTURE

STATUS

OFF

Cancel the function.

Enjoy movie playback with suitable colour temperature, sharp

subtitles and improved gradation for black, like in a theater.

When you set DVD THEATER STATUS to ON, Al ECO SENSOR / ECO

MODE and WHITE BALANCE adjustment become unavailable.

Only available in VIDEO-2 mode. \ Page 8.

Customized setting (continued)

ON TIMER

BEEP

You can set the TV to turn on automatically from standby mode at a set

channel and time.

You can use the BEEP function to alert you during AUTO SIGNAL

DETECT, Al ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF

TIMER operations and when some buttons on the remote control are

pressed.

FEATURES menu

ON TIMER

��

(Choose ON or OFF)

FEATURES menu

BEEP

��

� � ��

��

CHILD LOCK

You can disable the front control buttons of the TV.

Choose the PR (channel) that you want to watch when the TV turns on.

External input, AV position and any un-preset channel cannot be

chosen for PR.

(Choose ON or OFF)

CHILD LOCK

FEATURES menu

VIDEO-2 SETTING

Set the ON TIMER to your desired period of time.

When the ON TIMER is set to other than 00:00, the ON TIMER is

activated. You can set the period of time to a maximum of 12 hours in

15-minute intervals.

You can set the VIDEO-2 SETTING according to the video signal output

from external devices connected to the VIDEO-2 terminal.

(Factory setting is

COMPONENT)

FEATURES menu

VIDEO-2 SETTING

To off the ON TIMER, set ON TIMER to OFF.

VIDEO

If a normal video signal (composite video signal) is input.

Note: If TV is not in standby mode when ON TIMER is reach the setting

time, this case is not available.

COMPONENT If a component video signal (Y/C /C ) is input.

You must choose a setting according to the signal that you input to

VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you

must set VIDEO-2 SETTING to VIDEO.)

OFF TIMER

You can set the TV to turn off automatically to standby mode after a set

time.

For connection, \ page 4.

OFF TIMER

FEATURES menu

OFF TIMER

You can set the period of time to a maximum of 120 minutes in 10

minutes intervals.

When the remaining elapse time is one minute, “GOOD NIGHT!”

appears on the screen.

You can display the OFF TIMER screen again to confirm or change the

remaining time.

To off the OFF TIMER, select OFF or turn off the TVʼs main power.

TV channel presetting

To register the TV channels automatically

(AUTO PROGRAM)

to search for the TV channel.

(green)

(red)

You can register the TV channels automatically.

Searching stops when a channel is found and displayed.

SET UP menu

AUTO PROGRAM

If the reception is

poor

Press the yellow or blue button to fine tune the TV

channel.

AUTO PROGRAM

If noisy sound is

heard

Press the 3 button to choose an appropriate sound

system.

22%

OK / : EDIT

to exit.

to stop or when AUTO PROGRAM finishes.

The EDIT menu appears.

To edit the channel list

(MOVE, DELETE and INSERT in the EDIT menu)

You can edit the TV channel list as you like.

To edit the channel list Proceed to Step 2 of “To edit the channel list” on this

After this operation, other channelʼs PR number will be changed.

page.

If a channel is not

registered

Proceed to Step 3 of “To register the TV channels

manually” on this page.

Repeat Steps 1 and 2 of “To register the TV channels manually

(MANUAL in the EDIT menu)”, \ see left.

To exit the menu

Press the MENU button.

Choose the channel which you want to change its PR number, or

delete, or register a new channel.

To register the TV channels manually

(MANUAL in the EDIT menu)

You can register the TV channels into the TVʼs channel list manually.

To change the Press the 3 button. Then move it to the new PR number

PR number

(MOVE)

you want to use for the channel by pressing the 5/∞ button.

Finally press the 2 button.

Press the yellow button.

SET UP menu

EDIT/MANUAL

To delete

the channel

(DELETE)

��

�

��

To add the

new channel

(INSERT)

If you add a new TV channel of NTSC-M system, press the

SOUND SYSTEM button to change the sound system to M,

then select EDIT/MANUAL in SET UP menu. Press the green

button, then press the 3 button to choose “CC” or “CH”.

Enter the CH/CC number for the channel you wish to add.

The TV starts to search for the channel.

��

�

��

Choose the channel which you want to register.

to activate the MANUAL function. (The sound system of

the channel appears at the right of the CH/CC number.)

When a TV channel has already been registered in PR99,

using the INSERT function deletes that TV channel.

(blue)

to choose an appropriate sound system.

For details, see “SOUND SYSTEM”. \ Page 12

to exit.

TV channel presetting (continued)

CH/CC number

CCIR

S-18

S-19

S-20

S-21

S-22

S-23

S-24

S-25

S-26

S-27

S-28

S-29

S-30

S-31

S-32

S-33

S-34

S-35

S-36

S-37

S-38

S-39

S-40

S-41

OIRT

AUSTRALIA

CCIR

E33

E34

E35

E36

E37

E38

E39

E40

E41

E42

E43

E44

E45

E46

E47

E48

E49

E50

E51

E52

E53

E54

E55

E56

E57

E58

E59

E60

E61

E62

E63

E64

E65

E66

E67

E68

E69

OIRT

AUSTRALIA

AU-34

When you want to use the INSERT function on

page 15, find the CH/CC number corresponding

to the channel number of the TV channel from

this table.

CC 18

CC 19

CC 20

CC 21

CC 22

CC 23

CC 24

CC 25

CC 26

CC 27

CC 28

CC 29

CC 30

CC 31

CC 32

CC 33

CC 34

CC 35

CC 36

CC 37

CC 38

CC 39

CC 40

CC 41

CC 42

CC 43

CC 44

CC 45

CC 46

CC 47

CC 48

CC 49

CC 50

CC 51

CC 52

CC 53

CC 54

CC 55

CC 56

CC 57

CC 58

CC 59

CC 60

CC 61

CC 62

CC 63

CC 64

CC 75

CC 76

CC 77

CC 78

CC 79

CC 95

CC 96

CC 97

CC 98

CC 99

CH 33

CH 34

CH 35

CH 36

CH 37

CH 38

CH 39

CH 40

CH 41

CH 42

CH 43

CH 44

CH 45

CH 46

CH 47

CH 48

CH 49

CH 50

CH 51

CH 52

CH 53

CH 54

CH 55

CH 56

CH 57

CH 58

CH 59

CH 60

CH 61

CH 62

CH 63

CH 64

CH 65

CH 66

CH 67

CH 68

CH 69

US-33, W+48

US-34, W+49

US-35, W+50

US-36, W+51

US-37, W+52

US-38, W+53

US-39, W+54

US-40, W+55

US-41, W+56

US-42, W+57

US-43, W+58

US-44, W+59

US-45, W+60

US-46, W+61

US-47, W+62

US-48, W+63

US-49, W+64

US-50, W+65

US-51, W+66

US-52, W+67

US-53, W+68

US-54, W+69

US-55, W+70

US-56, W+71

US-57, W+72

US-58, W+73

US-59, W+74

US-60, W+75

US-61, W+76

US-62, W+77

US-63, W+78

US-64, W+79

US-65, W+80

US-66, W+81

US-67, W+82

US-68, W+83

US-69, W+84

AU-35

AU-36

AU-37

AU-38

AU-39/AU-40

AU-41

Channel No. Country

AU-42

AU-43

AU-44

United States, Philippines, etc..

Middle East, Southeast Asia, etc..

AU-45

AU-46

CCIR

OIRT

AU-47/AU-48

AU-49

AU-50

Eastern Europe, Russia, Vietnam,

etc..

AU-51

AU-52

AU-53

AU-54

AUSTRALIA Australia, etc..

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

W+10

W+11

W+12

W+13

W+14

W+15

W+16

W+17

W+18

W+19

W+20

W+21

W+22

W+23

W+24

W+25

W+26

W+27

W+28

AU-55/AU-56

AU-57

AU-58

AU-59

AU-60

Channel

AU-61

CCIR

OIRT

AUSTRALIA

AU-0

AU-62

CH 02

CH 03

CH 04

CH 05

CH 06

CH 07

CH 08

CH 09

CH 10

CH 11

CH 12

CH 13

CH 14

CH 15

CH 16

CH 17

CH 18

CH 19

CH 20

CH 21

CH 22

CH 23

CH 24

CH 25

CH 26

CH 27

CH 28

CH 29

CH 30

CH 31

CH 32

US-2

AU-63/AU-64

AU-65

US-3

AU-1

US-4

AU-2

AU-66

US-5

AU-6

AU-67

US-6

AU-7

AU-68

US-7

AU-8

AU-69

US-8

AU-9

US-9

US-10

E10

E11

E12

R10

R11

R12

AU-10

AU-11

US-11

US-12

US-13

US-14, W+29

US-15, W+30

US-16, W+31

US-17, W+32

US-18, W+33

US-19, W+34

US-20, W+35

US-21, W+36

US-22, W+37

US-23, W+38

US-24, W+39

US-25, W+40

US-26, W+41

US-27, W+42

US-28, W+43

US-29, W+44

US-30, W+45

US-31, W+46

US-32, W+47

CCIR

S-1

OIRT

AUSTRALIA

AU-5

CC 01

CC 02

CC 03

CC 04

CC 05

CC 06

CC 07

CC 08

CC 09

CC 10

CC 11

CC 12

CC 13

CC 14

CC 15

CC 16

CC 17

S-2

S-3

S-4

S-5

E21

E22

E23

E24

E25

E26

E27

E28

E29

E30

E31

E32

S-6

AU-5A

S-7

S-8

Z+1

Z+2

S-9

S-10

S-11

S-12

S-13

S-14

S-15

S-16

S-17

AU-3

AU-4

AU-28

AU-29

AU-30

AU-31/AU-32

AU-33

A-5

A-4

A-3

A-2

A-1

Troubleshooting

If a problem occurs when you are using the TV, check the below

troubleshooting guide before calling for repair.

Problem

Cause / Solution

Page

Colour patches appear • This maybe due to magnetized device such

–

at the corner of the

screen

as a speaker placed near to your TV. Move it

away from your TV. Alternatively, you can also

use the magnetic shielded speaker.

Problem

Cause / Solution

Page

No picture, no sound

• Deactivate the BLUE BACK function if it is

turned on.

Picture is tilted

• This maybe due to the earth magnetism. Refer 10

to “PICTURE TILT” to correct the tilt.

• Choose the appropriate sound system. Refer

to “SOUND SYSTEM”.

Image takes a short

period to be displayed

• Image required time to stabilize before display.

This is not a malfunction.

–

Snowy picture

• Check the aerial cable and TV connections.

–

Stripes appear on the

picture

• Interference caused by devices such as an

amplifier, personal computer, or a hair drier.

Move it away from your TV.

TV may emit crackling

sound

• This is due to a sudden change in temperature

and it is not a malfunction. If the crackling

sound is too frequent, request your service

technician for inspection.

–

Double-pictures

(ghosting) occur

• Interference occurs caused by signal reflecting

from mountains or building. Try to adjust the

aerialʼs direction or use another antenna.

–

Feel a slight electric

shock when touching

the TV screen

• This is due to the static electricity of the

picture tube and it will not harm the human

body. This is not a malfunction.

–

Poor picture

• Choose the appropriate colour system. Refer

to “COLOUR SYSTEM”.

• Adjust the COLOUR or BRIGHT setting. Refer

to “PICTURE SETTING”.

AUTO SIGNAL DETECT • Set the AUTO SIGNAL DETECT function to

does not work

ON.

• Turn the VCR or DVD Player off and on again.

• Check that the video cable connection on

VIDEO-2 is properly connected.

–

White and bright still

image look as if it was

coloured

• Inevitable phenomenon due to the nature of

the picture tube. This is not a malfunction.

–

Suddenly, the TV input • Check whether the AUTO SIGNAL DETECT

changes to VIDEO-2

–

Top of the image from

software products or

video tape is distorted

• Due to the condition of the video signal, the

image was not properly recorded. This is not

a malfunction.

function is on or off.

• AUTO SIGNAL DETECT function may work

when you operate the VCR or DVD player

even if you do not make it to playback.

Poor sound

• Adjust the sound frequency properly. Refer to

“SOUND SYSTEM”.

AUTO SIGNAL DETECT • Check the video cable connection.

does not work correctly • Some VCR or DVD player may output the

video signal discontinuously. If this happens,

AUTO SIGNAL DETECT function cannot work

correctly.

–

Stereo or bilingual

sound is unclear

• TV channel reception is poor. Change the

stereo/bilingual mode to mono sound.

Cannot operate the

remote control

• The batteries may be exhausted. Replace with

new batteries.

• Ensure that you are operating the remote

control at less than seven meters from the

front of your TV.

“PLEASE DISCONNECT • Please disconnect either S-VIDEO cable or

video input cable from video-1 input.

–

VIDEO-1 CABLE!”

appears on the screen.

Cannot operate the

menus

• Press TV/VIDEO button to return to TV mode

and try operating the menus.

–

Cannot operate the

front control buttons

• Deactivate the CHILD LOCK function if it is

turned on.

Specifications

TV RF systems

B, G, I, D, K, M

Colour systems

Receiving channels

PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz

VHF low channel (VL), VHF high channel (VH), UHF channel (U)

Receives cable channels in mid band, super band and hyper band.

AC 110 to 240 V, 50 Hz / 60 Hz

Power requirements

External input / output

VIDEO-1

S-video input, VIDEO input, AUDIO L/R input

VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/C_B/C_R) input

VIDEO input, AUDIO L/R input

VIDEO-2/COMPONENT

VIDEO-3

OUTPUT

VIDEO output, AUDIO L/R output

Headphone jack

Stereo mini jack (3.5 mm diameter)

^❇Sound-multiplex systems

^❇Teletext system

^❇Language displayed by teletext

A2 (B/G) or NICAM (B/G, I, D/K)

FLOF (Fastext), WST (World Standard Text)

Refer to the table in the description “TEXT LANGUAGE” (\ page 11).

^❇Depending on the models, STEREO/I II function for the Sound-multiplex systems or Teletext function may not be available.

†

Design and specifications subject to change without notice.

Memo

0508SCT-NF-MT

Intel GA 8N SLI User Manual
Intel M1920 User Manual
LG Electronics LG Life Good Computer Monitor W1946T User Manual
Magnavox 27MS345S User Manual
Moffat Blue Seal E512C B User Manual
Moxa Technologies TCC 80I User Manual
New Transducers TR 5001 User Manual
Philips DECT5154S User Manual
Philips Designer 27PT6442 User Manual
Philips DVP 3020 User Manual