JVC 0307MNH SW BJ User Manual

ENGLISH  
FRANÇAIS  
ESPAÑOL  
CU-VD40U  
DVD Burner  
INSTRUCTIONS  
Graveur de DVD  
MANUEL D’UTILISATION  
Grabador de DVD  
MANUAL DE INSTRUCCIONES  
For Customer Use:  
Enter the Model No. and Serial  
No. (located on the bottom of the  
burner) below. Retain this  
information for future reference.  
Model No.  
Serial No.  
LYT1752-001A  
Safety Precautions for the Burner  
Cleaning Procedure  
EN  
FR  
ES  
Be sure to observe the following precautions. Failing to do so  
may result in electric shock, fire, injury, or malfunction.  
Do not disassemble, dismantle, or modify the equipment.  
Requests for repair and inspection should be made to the  
dealer.  
IMPORTANT:  
Be sure to unplug the burner before beginning cleaning.  
Do not use liquid or aerosol cleaners.  
Ensure that no moisture or liquid comes into contact with the  
drive during cleaning.  
Exterior of the Burner:  
Wipe dirt off with a dry cloth.  
Disc Tray:  
Wipe off dirt with a soft dry  
cloth.  
Do not insert metal or combustible objects or pour water or  
other liquids inside the burner.  
Turn off the power when connecting equipment.  
Remove the plug when the burner will not be used for a  
prolonged time or prior to cleaning (electricity flows through  
the equipment even when the power is off).  
Do not block the ventilation holes of the burner.  
Do not use where there is condensation. Suddenly carrying  
the burner from a cold location to a hot location may result in  
the formation of drops, which may cause a malfunction or  
failure.  
Disc:  
Gently wipe from the inner edge  
to the outer edge with a soft  
cloth.  
Storage:  
Do not cause the burner to vibrate when discs are in.  
Make sure that discs are kept in their cases. If discs are piled on  
top of one another without their protective cases, they can be  
damaged. Do not put discs in a location where they may be  
exposed to direct sunlight, or in a place where the humidity or  
temperature is high. Avoid leaving discs in your car!  
Safety Precautions for Accessories  
When using the AC adapter, the power cord, and the USB  
cable, be sure to observe the following precautions. Failing to  
do so may result in electric shock, fire, injury, or malfunction.  
• Do not insert or remove the plug when your hands are wet.  
• Fully insert the plug into the outlet.  
Region Codes  
Region codes are numbers for restricting DVD video playback.  
The world is separated into six regions and each region is  
identified by a number. If the number for a disc does not match  
the number for the player, the disc cannot be played on the  
player. (The initial region code is indicated on the label on the  
bottom of the burner.)  
• Keep dust and metal objects away from the plug.  
• Do not damage the cord.  
• Place the cord where it will not trip someone up.  
• Do not use when thunder can be heard.  
• Do not dismantle.  
• Do not use for any product other than this one.  
Do not play the provided CD-ROM with an audio player. Doing  
so may damage the circuits or speakers.  
Disclaimer  
JVC accepts no liability whatsoever for loss of data resulting  
from inappropriate connections or handling.  
Safety Precautions for Discs  
Do not use the following discs.  
Cracked discs  
Copyrights  
Duplicating copyright protected material, for other than personal  
use, without the permission of the copyright holder is prohibited  
by copyright law.  
Deeply scratched discs  
Installation  
Do not install in any of the following locations.  
Humid location  
Registered Trademarks and  
Trademarks  
Location of 60 °C or above  
Location subject to direct sunlight  
Location where overheating is likely  
Dusty or smoky locations  
Locations subject to oily smoke or steam such as a kitchen  
counter or beside a humidifier  
Unstable location  
Bathroom  
Dusty places  
Slanted location  
®
Windows is either registered trademark or trademark of  
Microsoft Corporation in the United States and/or other  
countries.  
Macintosh and Mac OS are trademarks of Apple Computer,  
Inc., registered in the United States and other countries.  
Pentium is a registered trademark of Intel Corporation in the  
United States.  
Manufactured under licence from Dolby Laboratories. “Dolby”  
and the double-D symbol are trademarks of Dolby  
Laboratories.  
HDMI, HDMI logo and high definition multimedia interface are  
trademarks or registered trademarks of HDMI Licensing LCC.  
Other company and product names mentioned herein are  
registered trademarks and/or trademarks of their respective  
holders.  
ATTENTION:  
On placing the unit:  
Some TVs or other appliances generate strong magnetic fields. Do  
not place such appliances on top of the unit as it may cause picture  
disturbance.  
When moving the product:  
Press C/B to turn off the power, and wait at least 30 seconds before  
unplugging the power cord. Then, wait at least 2 minutes before  
moving the product.  
3
Enjoy High Definition Images Copied to DVDs!  
Copying to DVD  
A Connect.  
Audio/Video cable  
(provided)  
(provided)  
B Select the desired copy method.  
The following 6 methods of copying are available.  
GZ-HD7U  
instruction manual  
Methods of copying  
Types of copy operation  
Copy all images shot.  
Copy only newly shot images.  
0Page 48  
0Page 48  
0Page 49  
0Page 49  
0Page 49  
0Page 49  
Copy all  
(NORMAL BACK-UP)  
Search and copy by date.  
Search and copy by scenes.  
Search and copy by events.  
Copy using playlists.  
Copy only favorite scenes  
(SELECT BACK-UP)  
z The date for videos created from playlists will be the same as the date the DVD is created.  
C Copy to DVD.  
z For details on finalizing, refer to  
pages 48 to 50 of the GZ-HD7U  
instruction manual.  
DVD  
5
3
DVD(DL)  
z Time taken for copying will be  
long if there are a large number  
of files.  
EXECUTE AND FINALIZE  
CANCEL  
SELECT SET  
TOP  
Select and set on “EXECUTE AND FINALIZE”.  
z Additional recordings are not possible after finalizing.  
To add new recordings  
z Select and set on “EXECUTE” instead of “EXECUTE AND FINALIZE”.  
z Discs that are not finalized cannot be played back on PC or this burner.  
To play back, connect as shown in the diagram above, and refer to pages 48 to 50 of the GZ-HD7U instruction manual.  
4
   
EN  
FR  
ES  
Viewing Images Copied to DVD on the TV  
A Connect.  
Audio/Video cable  
(provided)  
A Disconnect the USB cable and turn off this burner.  
B Connect the burner to the TV.  
z To view high definition images, connect using an optional HDMI cable or component video cable.  
B Play back.  
A Turn on the burner.  
z Confirm that the power lamp is lighted in orange. If the lamp is not lighted in orange, disconnect the USB cable then turn  
off and on the power again.  
Approx. 20 seconds later  
B Press the open/close (M) button to eject the tray.  
C Insert a finalized disc.  
D Press the open/close (M) button to close the tray.  
z The following screen appears.  
PLAY VIDEO  
PLAY IMAGE  
E Play back.  
z For details on playback, refer to page 15 of this instruction manual.  
Before erasing data from GZ-HD7U  
.................................................................................................................................................................  
z Confirm that the data has been copied to DVD before erasing.  
5
 
Contents  
DVD Burner  
Safety Precautions.....................................................................2  
CU-VD40U  
Enjoy High Definition Images Copied to DVDs! .........................4  
Copying to DVD............................................................................................ 4  
ENGLISH  
Getting Started...........................................................................7  
Placing the Burner........................................................................................ 7  
Inserting a Disc............................................................................................. 7  
Connecting to TV .......................................................................9  
Connecting to a TV with DVI Input Terminal............................................... 10  
To Connect ................................................................................................. 12  
Computers That Can Be Used ................................................................... 12  
Installing CyberLink Power2Go 5.5 Lite ..................................................... 13  
Viewing Videos Saved from High Definition Everio Camera ...................... 15  
Viewing Still Images Saved from High Definition Everio Camera............... 17  
Viewing High Quality Images ...................................................19  
Changing the Settings..............................................................20  
Menu Operation Procedures ...................................................................... 20  
Troubleshooting .......................................................................23  
Error Messages........................................................................24  
Specifications...........................................................................25  
6
 
EN  
FR  
ES  
Getting Started  
Accessories  
Power cord  
USB cable  
DVD-ROM  
Audio/Video  
cable  
AC adapter  
(AP-V400U)  
Stand  
Remote control  
(RM-V41U)  
Recording disc (DVD-R DL)  
(For use with high definition Everio Camera.  
Cannot be used with an Everio Camera.)  
Lithium Battery (CR2025)  
Pre-installed in the remote  
control unit.  
CAUTION:  
z Do not use the provided AC adapter and power cord with other devices. In addition, do not use AC adapter, power cord and  
USB cable other than those provided with this burner. Doing so may result in electric shock or fire.  
Placing the Burner  
Horizontal orientation  
Bottom surface  
z Take note of the top and bottom of the burner and  
place it in the horizontal orientation.  
Stand (provided)  
Vertical orientation  
z When using in the vertical orientation, align the vent of  
the burner with that of the provided stand, then place  
and fix the burner securely on the stand.  
Vent  
Inserting a Disc  
When handling a disc, be sure not to touch the playback/recording side of the disc.  
Use only the [M] button on the burner or the remote control to eject the disc tray. If you open the tray manually,  
there is a risk of the disc dropping out or getting caught.  
Horizontal orientation  
Vertical orientation  
Preparing the Remote Control  
A battery is included inside the remote control at the time of purchase. Remove the insulation sheet before use.  
To Reinsert the Battery  
Lithium Battery  
(CR2025)  
z Pull out the battery holder by pressing the lock tab.  
Lock Tab  
7
         
Guide to Parts and Controls  
Front  
.................................................................................................................................................................  
H
A Open/Close Button (M)  
B Power Button (C/B)  
C Power Lamp  
Green light:  
When connected to Everio camera or  
PC.  
Orange light:  
During playback.  
D Play/Pause Button (I/W)  
E Stop Button (o)  
F Previous Button (S)  
G Next Button (T)  
H Disc Tray  
A B C D E F G  
Rear  
.................................................................................................................................................................  
E
A DC Connector  
B USB Connector  
C
C Cooling Fan  
COMPONENT VIDEO OUT  
PR  
PB  
Y
D HDMI Terminal  
E COMPONENT VIDEO OUT Connectors  
F AUDIO output Connectors  
G VIDEO output Connector  
DC  
R
L
VIDEO  
AUDIO  
B
D
F
G
A
Remote control  
.................................................................................................................................................................  
J
A OPEN/CLOSE Button (M)  
B SET UP Button  
C TOP MENU Button  
D Selection keys (  
E STOP Button (o)  
F PREVIOUS Button (S)  
G REV Button (O)  
H FWD Button (N)  
I PLAY/PAUSE Button (I/W)  
J TOOL Button  
K RESOLUTION Button  
L ON SCREEN Button  
M MENU Button  
N ENTER Button  
O RETURN Button  
P Skip Button (v)  
Q Replay Button (w)  
R NEXT Button (T)  
K
L
M
N
A
B
C
/
/ / )  
D
E
F
O
P
Q
R
G
H
I
8
 
EN  
FR  
ES  
Connecting to TV  
To view high definition images, connect using an optional HDMI cable or component video cable.  
Connecting to a TV with HDMI Input Terminal  
TV  
This burner  
COMPONENT VIDEO OUT  
PR  
PB  
Y
DC  
R
L
VIDEO  
HDMI  
AUDIO  
HDMI cable (not provided)  
NOTES:  
z Images can only be displayed on a High-bandwidth Digital Content Protection (HPCP) monitor. (0P24)  
z When images do not appear normally, set the “HDMI COLOR SETTING” in the setting menu to “RGB”. (0P21)  
Connecting to a TV with Component Video Input Connectors  
TV  
Component video cable  
(not provided)  
This burner  
CMPONENVIDEO OU
PR  
PB  
Y
AUDIO IN  
DC  
R
L
VIDEO  
CR/PR CB/PB  
Y
L
R
AUDIO  
Component video cable  
Y=Green / PB=Blue  
PR=Red  
Audio cable  
L=White / R=Red  
Audio cable (not provided)  
9
     
Connecting to a TV with Video/Audio Input Connectors  
Connect the output connectors of the burner to the input connectors of the TV with the provided Audio/Video  
cable.  
TV  
This burner  
COMPONENT VIDEO OUT  
P
R
PB  
Y
AUDIO IN  
DC  
R
L
VIDEO  
AUDIO  
L
R
VIDEO IN  
Audio/Video cable  
R=Red  
L=White  
VIDEO=Yellow  
Audio/Video cable (provided)  
Connecting to a TV with DVI Input Terminal  
TV  
HDMI-DVI cable  
(not provided)  
This burner  
COMPONENT VIDEO OUT  
PR  
PB  
Y
DC  
AUDIO IN  
R
L
VIDEO  
AUDIO  
DVI  
L
R
Audio cable  
R=Red  
L=White  
Audio cable (not provided)  
NOTES:  
z Images can only be displayed on a High-bandwidth Digital Content Protection (HPCP) monitor. (0P24)  
z When black-and-white images are not clear, set the “HDMI ENHANCE SETTING” in the setting menu to “ON”. (0P21)  
10  
   
EN  
FR  
ES  
Saving Everio Camera Images to DVD  
You can easily create data discs by connecting the burner to an Everio camera.  
A Press the [OPEN/CLOSE] button  
To Connect  
after the menu appears on the  
Everio.  
PREPARATIONS:  
z Power/Mode switch (Everio camera) : Off  
z The disc tray opens.  
z Power switch (This burner) : Off  
B Insert a disc.  
z We recommend you to use a compatible disc.  
(0P25)  
C Press the [OPEN/CLOSE] button.  
z The disc tray closes.  
USB  
DC  
USB cable  
(provided)  
D Create data/DVD video discs.  
z Refer to the Everio camera instruction manual on how  
to create data/DVD video discs.  
AC adapter  
(provided for the camera)  
NOTES:  
USB  
z Data discs cannot be played on DVD recorders/players.  
z DVDs created with GZ-MG series Everio camera equipped  
with the direct DVD creation function are DVD video  
discs, not data discs. (For details, refer to the instruction  
manual of the Everio camera.)  
COMPONENT VIDEO OUT  
PR  
PB  
Y
DC  
R
L
VIDEO  
AUDIO  
z A disc cannot be ejected while data is being written to the  
disc. Wait until writing finishes.  
z The remote control cannot be operated when the burner is  
connected to the Everio camera via USB cable.  
Power supply outlet  
DC  
Power cord  
(provided)  
z A considerable amount of time is required if over 1000  
video or still images are being saved to DVD, therefore it is  
advisable to back up in advance.  
AC adapter  
(provided for the burner)  
When a disc cannot be ejected  
............................................................................  
z The positions of DC connector and USB connector and  
indications (On/Off) of the Power/Mode switch may be  
different for some Everio camera models.  
When a disc cannot be ejected with the [OPEN/  
CLOSE] button, use the following procedure to eject  
by force.  
z During saving, there is no output from the HDMI terminal  
or COMPONENT VIDEO OUT connectors of this burner.  
The video image can be displayed from the Everio  
camera’s LCD monitor or by connecting the Everio camera  
to a TV.  
a Turn off the power.  
b Insert a thin rod of about 10 cm long into the force  
eject hole located on the right side of the burner.  
The disc tray will be ejected for about 1 cm.  
c Pull out the disc tray manually and take out the  
Creating Data/DVD Video Discs  
disc.  
CAUTION:  
z When recording an event (such as athletics meet) with an  
Everio camera, it is advisable to use the same recording  
mode throughout. Changing the recording mode will  
cause an event to be divided and saved into two or more  
folders.  
z When there is a disc in the burner, do not subject the  
Everio camera or burner to vibration or mechanical shock.  
PREPARATIONS:  
z Power/Mode switch (Everio camera) : On  
z Power switch (This burner) : On  
Force eject hole  
z Be sure to place the burner horizontally.  
11  
     
Saving PC Images to DVD  
This burner can be used as a DVD burner by connecting it to a PC. Images edited on a PC can also  
be saved to a DVD by using the provided software.  
z For details on how to save, refer to the Power2Go  
To Connect  
User’s guide, Help and ReadMe.  
You can view User’s guide, Help and ReadMe from  
the start menu of the PC.  
PREPARATIONS:  
z This burner cannot be used to write files into CD-R or  
CD-RW. Also, it does not respond to all the functions  
of Power2Go 5.5 Lite.  
z Power switch (This burner) : Off  
z PC Power : Off  
z To get customer support and to register the software,  
you need the following product key (CD-Key):  
USB cable  
(provided for the Everio  
camera)  
PXNVM-NWE4G-XQD9Q-CU9DX-3FQFN-NAKUS  
z Power2Go 5.5 Lite does not support conversion of  
audio files to MP3 format.  
z When the “Enter Activation Key” screen appears  
while using Power2Go 5.5 Lite, close the screen  
without entering the activation key.  
USB  
PC  
Removing USB Cable from PC  
USB  
............................................................................  
Power supply outlet  
COMPONENT VIDEO OUT  
PR  
PB  
Y
a Carry out removing of hardware on the PC.  
b Remove the USB Cable.  
DC  
R
L
VIDEO  
AUDIO  
DC  
Computers That Can Be Used  
Power cord  
(provided)  
CyberLink Power2Go 5.5 Lite can be used on  
computers satisfying the following conditions.  
AC adapter  
(provided for the burner)  
Operating system:  
WindowsXP Home Edition [XP] (pre-installed)  
WindowsXP Home Professional [XP] (pre-installed)  
Connector:  
USB 2.0/1.1 connector  
z If you use USB1.1 cable, it will take approximately 3  
hours to write one DVD.  
Saving to a DVD  
CPU:  
A Turn on the burner and the PC.  
IntelPentiumIII, at least 800 MHz  
(IntelPentium4, at least 2 GHz recommended)  
z Install the CyberLink Power2Go 5.5 Lite software if  
you have not done so.  
RAM:  
At least 128 MB (at least 256 MB recommended)  
B Insert a disc.  
Free hard disk space:  
At least 50 MB for installation  
At least 5 GB recommended for making DVDs  
z We recommend you to use a compatible disc.  
(0P25)  
Display:  
Must be capable of displaying 800 c 600 dots  
C Use Power2Go to save to a DVD.  
1. Use Power2Go to create a folder.  
z You can create the desired folder names; however  
do not use “EVERIO_V” or “EVERIO_S” as the  
folder name.  
z Use half-width alphanumeric characters when  
entering the folder or file names. You can enter up  
to 40 half-width characters.  
2. Set the file system of the data tab in the Power2Go  
setup menu to “UDF1.5”.  
3. Copy files such as MPEG, JPEG and TPD into the  
folder.  
12  
       
EN  
FR  
ES  
E Enter the “User Name” and  
“Company Name” and then click  
“Next”.  
Installing CyberLink Power2Go 5.5  
Lite  
CAUTION:  
z Do not play the provided CD-ROM in an audio player. It is  
not an audio CD. Playing this CD-ROM in an audio player  
will result in a loud high noise. It may also damage the  
circuit and speaker.  
A Insert the provided CD-ROM in the  
PC.  
F Follow the on-screen instructions.  
z The “Choose Setup Language” screen appears.  
z Installation starts. The “InstallShield Wizard  
Complete” screen appears.  
B Confirm the language and then click  
“OK”.  
G Click “Finish”.  
z The following screen  
appears.  
z The computer will  
restart and installation  
is completed.  
z If the screen on the  
right does not appear,  
proceed to step H.  
C Click “Next”.  
z The “License  
Agreement” screen  
appears.  
H Click “Finish”.  
z The “CyberLink  
Power2Go 5.5”  
Readme screen  
appears.  
D Confirm the contents and then click  
“Yes”.  
z The “Customer  
Information” screen  
appears.  
I Read the contents of the Readme.  
CyberLink Power2Go 5.5 Lite Contact Information  
For information on CyberLink Power2Go 5.5 Lite or other products, use the following contact information.  
Telephone/fax support  
Location  
Language  
Office hours (Mon. to Fri.)  
Phone #  
Fax #  
Germany  
English / French / Spanish  
9:00 am to 5:00 pm  
+49-700-462-92375  
+49-241-70525-25  
Paid voice support  
Location  
Language  
Office hours (Mon. to Fri.)  
URL  
U.S.A.  
English  
1:00 pm to 10:00 pm CST  
Support web/e-mail  
Language  
English  
French / Spanish  
URL/e-mail address  
13  
   
Folder Configuration  
This shows the folder configuration when files are saved from a high definition Everio camera or a PC  
to DVD.  
When video/still image files are saved from high definition Everio camera  
.................................................................................................................................................................  
Back-up date folders  
Video folders  
Root  
*1  
[EVERIO_V]  
EVERIO VIDEO  
[BACKUP]  
NORMAL BACK-UP  
[06060101]  
[PRG001]  
(Everio : ALL SCENES)  
[06123199]  
[PRG002]  
[DATE]  
[06060101]  
[06060101]  
[06060101]  
[06060101]  
DATE BACK-UP  
(Everio : SELECT FROM DATE)  
[EVENT]  
EVENT BACK-UP  
(Everio : SELECT FROM EVENT)  
[FILES]  
FILE BACK-UP  
(Everio : SELECT FROM SCENES)  
[PLAYLIST]  
PLAYLIST BACK-UP  
(Everio : SELECT FROM PLAYLIST)  
Back-up date folders  
Still image files  
*1  
[EVERIO_S]  
[BACKUP]  
NORMAL BACK-UP  
[06060101]  
[PIC_0001.JPG]  
EVERIO IMAGE  
[PIC_0002.JPG]  
[DATE]  
[06060101]  
[06060101]  
DATE BACK-UP  
[FILES]  
FILE BACK-UP  
*1 Video and image files taken by high definition Everio camera that are saved to this burner will be saved in the “EVERIO_V”  
and “EVERIO_S” folders.  
When desired folders/files are created and saved on a PC  
.................................................................................................................................................................  
*2 Only high definition Everio video files (“.TPD” files)  
Root  
edited on the PC can be saved in the “EXTMOV” folder.  
z “.TPD” files can also be saved in folders created on the  
PC.  
*3 Create folders with Power2Go and saved the desired  
Video files to be edited  
video and/or still image files into the folders. You can use  
*2, 4  
*5  
your preferred folder names and file names. (Shown as  
“USER DAT” in the illustration.)  
[EXTMOV]  
[MOV_0001.TPD]  
EVERIO VIDEO  
*4 Use Power2Go to save the “EXTMOV” and “USER DAT”  
folders to DVD. (0P12)  
[MOV_0002.TPD]  
*5 Files with the extension “.TPD” are high definition Everio  
video files that are edited on the PC.  
Files with the extension “.MPG” are Everio video files  
that are edited on the PC. (For details, refer to “Data  
format (extension)” (0P25).)  
Video/Still image files  
*3, 4  
[USER_DAT]  
*5  
[USER_DAT2]  
[USER_DAT3]  
[USER2.MPG]  
CAUTION:  
z You can create the desired folder and file names, however  
do not use “EVERIO_V” or “EVERIO_S” as the folder  
name. In addition, use half-width alphanumeric characters  
when entering the folder or file names. You can enter up to  
40 half-width characters.  
[USER1.MPG]  
[USER3.JPG]  
z Folders can only be created up to 16 levels. Playback may  
be impossible if folders exceed 16 levels.  
14  
 
EN  
FR  
ES  
Viewing Images Saved in DVD  
This burner can play DVDs saved from an Everio camera or a PC.  
Viewing Videos Saved from High Definition Everio Camera  
D Select “NORMAL BACK-UP”.  
To playback the image immediately after saving in  
DVD  
1. SELECT  
PLAY VIDEO  
EVERIO VIDEO  
NAME  
1. Remove the USB cable. (0P12)  
2. Turn off the power of this burner.  
3. Connect to TV and power on this burner.  
NORMAL BACK-UP  
NORMAL BACK-UP  
DATE BACK-UP  
EVENT BACK-UP  
FILE BACK-UP  
PLAYLIST BACK-UP  
1/5  
z Confirm that the power lamp on the burner is lighted  
in orange.  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
For details on connections, refer to “Connecting to TV”  
(0P9, 10).  
z Files will be sorted automatically to the created  
folders, depending on the items selected in the  
“CREATE DVD” function of the high definition Everio  
camera. (0P14)  
<Example>  
When all videos shot on a high definition Everio camera are  
saved in DVD.  
E Select the date saved in DVD.  
A Insert a disc.  
1. SELECT  
PLAY VIDEO  
NORMAL BACK-UP  
NAME  
06060101  
06060101  
06123199  
B Select “PLAY VIDEO”.  
1. SELECT  
1/2  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
PLAY VIDEO  
PLAY IMAGE  
F Select the folder to be played.  
2. CONFIRM  
1. SELECT  
PLAY VIDEO  
06060101  
NAME  
z The playback navigator appears.  
PRG001  
PRG001  
PRG002  
NUMBER OF FILE  
99  
PRG003  
PRG004  
PRG005  
DATE  
PRG006  
1.6.2006  
TIME  
00:00:00  
PRG007  
PRG008  
C Select “EVERIO VIDEO”.  
1/8  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
1. SELECT  
PLAY VIDEO  
PLAY VIDEO  
NAME  
EVERIO VIDEO  
EVERIO VIDEO  
z The files in the folder will be played sequentially.  
z For details on playback operations, refer to “Buttons  
that can be used during playback” (0P16).  
1/3  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
CAUTION:  
z There will be an approximately 0.5 seconds still image  
z To playback videos saved from a PC, select “EDITED  
between each file.  
VIDEO”. (0P14)  
z An approximately 2 seconds black screen will appear  
between each folder when you press the [S] /[T]  
buttons to select the folder to be played.  
z If you had created a desired folder on a PC, select that  
folder name.  
CAUTION:  
z Check the resolution setting if the image is not displayed.  
(0P19)  
15  
   
Buttons that can be used during playback  
.................................................................................................................................................................  
Button names  
PLAY  
During video playback  
Pressing the button during pause or variable Starts a slideshow.  
speed playback will play the video.  
During still image playback  
z You can also use the [ENTER] button.  
z You can also use the [ENTER] button.  
Stops the playback and displays still images. Stops the slideshow and displays still images.  
PAUSE  
STOP  
z You can also use the [ENTER] button.  
z You can also use the [ENTER] button.  
Stops the playback and returns to the playback navigator.  
z You can also use the [RETURN], [TOP MENU] or [MENU] button.  
Pressing the button each time changes the  
search from Search b1 to Search b5.  
z Pressing the [FWD] button changes the  
search to Search a1.  
REV  
b
b
z Slow reverse cannot be performed.  
Pressing the button each time changes the  
search from Search a1 to Search a5.  
z Pressing the [REV] button changes the search  
to Search b1.  
FWD  
Pressing the button each time during pause  
will play the video in 4 different speeds of  
1/16x, 1/8x, 1/4x and 1/2x.  
Displays the next folder.  
Displays the next file.  
NEXT  
Displays the beginning of the folder.  
Displays the previous file.  
PREVIOUS  
Moves the playback position forward for  
approx. 30 seconds. Pressing this button  
continuously will move the position ahead for  
the number of times the button is pressed.  
Moves the playback position backward for  
approx. 7 seconds. Pressing this button  
continuously will move the position backward  
for the number of times the button is pressed.  
Skip  
b
b
Replay  
Displays the beginning of the file.  
Selection key :  
UP  
When paused, each press of the button rotates  
the image 90 degrees.  
Displays the next file.  
Selection key :  
DOWN  
Pressing the button each time changes the  
search from Search b1 to Search b5.  
z Pressing the [FWD] button changes the  
search to Search a1.  
Displays the previous file.  
Displays the next file.  
Selection key :  
LEFT  
z Slow reverse cannot be performed.  
Pressing the button each time changes the  
search from Search a1 to Search a5.  
z Pressing the [REV] button changes the search  
to Search b1.  
Selection key :  
RIGHT  
Changes the playback settings. (While the  
screen in step F on page 15 is displayed.)  
CONTINUE PLAYBACK : Plays the video from  
the previously stopped position.  
PLAY FROM BEGINNING : Plays the video  
from the beginning of the file.  
Changes the playback settings. (While the screen  
in step C on page 17 is displayed.)  
SLIDESHOW INTERVAL  
Sets the time to display one image (maximum  
approx. 2 MB). It may take some time to  
display depending on the image size.  
10 SEC / 15 SEC / 20 SEC  
SLIDESHOW EFFECTS  
Sets a fading effect when changing image  
display.  
TOOL  
ON : Fade in from black, fade out to black  
OFF : No fading effect.  
CHANGE VIEW  
Sets the display format of the playback  
navigator.  
Thumbnail/List  
16  
EN  
FR  
ES  
Viewing Still Images Saved from High Definition Everio Camera  
E Select the date saved in DVD.  
To playback the image immediately after saving in  
DVD  
1. SELECT  
PLAY IMAGE  
NORMAL BACK-UP  
NAME  
1. Remove the USB cable. (0P12)  
06060101  
06060101  
2. Turn off the power of this burner.  
3. Connect to TV and power on this burner.  
1/1  
z Confirm that the power lamp on the burner is lighted  
in orange.  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
For details on connections, refer to “Connecting to TV”  
(0P9, 10).  
F Select the file to be played.  
<Example>  
When all still images shot on a high definition Everio  
camera are saved in DVD.  
1. SELECT  
PLAY IMAGE  
06060101  
NAME  
PIC_0001.JPG  
FOLDER  
104JVCSO  
DATE  
1.6.2006  
TIME  
00:00:00  
A Insert a disc.  
SIZE  
1920x 1080  
1/12  
SET RETURN RETURN  
TOOL MENU  
TOOL  
2. CONFIRM  
B Select “PLAY IMAGE”.  
z Playback starts.  
z For details on playback operations, refer to “Buttons  
that can be used during playback” (0P16).  
1. SELECT  
NOTES:  
PLAY VIDEO  
PLAY IMAGE  
z Only still images conforming to the Exif standard will be  
displayed in thumbnails. For any other still images, “?” is  
displayed and they may not be playable.  
2. CONFIRM  
z It may take some time to display if the image file size is  
large or when there are many files.  
z The playback navigator appears.  
C Select “EVERIO IMAGE”.  
1. SELECT  
PLAY IMAGE  
PLAY IMAGE  
EVERIO IMAGE USER_DAT  
NAME  
EVERIO IMAGE  
1/2  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
z If you had created a desired folder on a PC, select that  
folder name. The folder is displayed as “USER DAT”  
on the screen in step C. (0P14)  
CAUTION:  
z Check the resolution setting if the image is not displayed.  
(0P19)  
D Select “NORMAL BACK-UP”.  
1. SELECT  
PLAY IMAGE  
EVERIO IMAGE  
NAME  
NORMAL BACK-UP  
NORMAL BAC  
K-UP  
DATE BACK-U FILE BACK-UP  
P
1/3  
TOOL  
SET RETURN RETURN  
TOOL MENU  
2. CONFIRM  
z Files will be sorted automatically to the created  
folders, depending on the items selected in the  
“CREATE DVD” function of the high definition Everio  
camera. (0P14)  
17  
 
Viewing DVD Videos Saved from Everio Camera  
CAUTION:  
To playback the image immediately after saving in  
z Check the resolution setting if the image is not displayed.  
(0P19)  
DVD  
1. Remove the USB cable. (0P12)  
2. Turn off the power of this burner.  
3. Connect to TV and power on this burner.  
NOTE:  
z A music CD cannot be played when a TV is connected.  
z Confirm that the power lamp on the burner is lighted  
in orange.  
For details on connections, refer to “Connecting to TV”  
(0P9, 10).  
Displaying menu screen during playback  
............................................................................  
A Insert a disc.  
or  
B Play the video.  
z The video plays back or a menu screen appears.  
Exiting menu screen  
............................................................................  
C When the menu screen appears,  
select a menu item.  
1. SELECT  
2. CONFIRM  
Buttons that can be used during playback  
.................................................................................................................................................................  
Button names  
PLAY  
During DVD video playback  
Pressing the button during pause or variable speed playback will play the video.  
PAUSE  
STOP  
Pauses the playback.  
Stops playback.  
Pressing the button each time changes the search from Search b1 to Search b5.  
z Pressing the [FWD] button changes the search to Search a1.  
z Slow reverse cannot be performed.  
REV  
Pressing the button each time changes the search from Search a1 to Search a5.  
z Pressing the [REV] button changes the search to Search b1.  
Pressing the button each time during pause will play the video in 4 different speeds of 1/16x,  
1/8x, 1/4x and 1/2x.  
FWD  
NEXT  
Moves to the next chapter.  
PREVIOUS Moves to the previous chapter.  
Moves the playback position forward for approx. 30 seconds. Pressing this button continuously  
will move the position ahead for the number of times the button is pressed.  
Skip  
Moves the playback position backward for approx. 7 seconds. Pressing this button continuously  
will move the position backward for the number of times the button is pressed.  
Replay  
Changes the playback settings. (During playback)  
AUDIO LANGUAGE : Not available.  
SUBTITLE LANGUAGE : Not available.  
CHANGE ANGLE : Not available.  
TOOL  
CHANGE TITLE : Select the title and jump to that title.  
CHANGE CHAPTER : Select the chapter and jump to that chapter.  
18  
 
EN  
FR  
ES  
Viewing High Quality Images  
You can change the video output resolution when the burner is connected to a progressive scan TV  
via an HDMI cable or component video cable.  
A Change output resolution during  
B Select “YES”.  
stop mode.  
1. SELECT  
CURRENT RESOLUTION  
:
480i  
DO YOU WANT TO SAVE THE SETTINGS?  
YES  
NO  
2. CONFIRM  
z Every press of the button changes the resolution as  
follows.  
z If the image is not displayed on the TV after changing  
the resolution, do not operate the burner for 15  
seconds. The resolution setting before the change is  
restored.  
Connection via HDMI cable (However, the selections  
for resolution not supported by TV may not be  
displayed.)  
NOTES:  
AUTO  
480p  
1080i  
720p  
z When HDMI cable is connected, images are not output in  
analog.  
Connection via component video cable (HDMI cable  
is not connected)  
z When “480i” is selected, images are output from both the  
VIDEO connector and the COMPONENT VIDEO OUT  
connectors.  
480i  
480p  
1080i  
720p  
CAUTION:  
Connection via video cable  
Set the resolution to “480i”. Image cannot be  
displayed if other settings are being selected. Press  
the [RESOLUTION] button and set to “480i”.  
z “AUTO” will be selected automatically when the burner is  
connected via an HDMI cable to a TV not supporting the  
selected resolution.  
z When the burner is connected to a TV via a component  
video cable and the output resolution is set to “1080i” or  
“720p”, playback will stop if a digital copy protected (CSS)  
disc is played. (0P24)  
19  
 
Changing the Settings  
Configures basic settings that determines the operation of the burner.  
Menu Operation Procedures  
<Example>  
F Select “YES”.  
To change the “SELECT TV TYPE” of “VIDEOS” from  
“16:9” to “4:3LB”.  
1. SELECT  
SETTINGS  
VIDEOS  
SELECT TV TYPE  
4:3 LB  
When connected to TV and power is on  
A Display the “SETTINGS” screen.  
DO YOU WANT TO SAVE THE SETTINGS?  
YES  
NO  
SAVE  
CANCEL  
R
E
T
U
R
SELECT  
SET  
N CANCEL  
2. CONFIRM  
G Exit the “SETTINGS” screen.  
B Select “VIDEOS”.  
1. SELECT  
SETTINGS  
VIDEOS  
DVD  
GENERAL  
RESET  
1/4  
SET  
UP CANCEL  
SELECT  
SET  
2. CONFIRM  
C Select “SELECT TV TYPE”.  
1. SELECT  
SETTINGS  
VIDEOS  
SELECT TV TYPE  
16:9  
AUTO  
OFF  
HDMI COLOR SETTING  
HDMI ENHANCE SETTING  
SAVE  
CANCEL  
CANCEL  
CANCEL  
R
E
T
UR  
SELECT  
SET  
N CANCEL  
2. CONFIRM  
D Select “4:3LB”.  
1. SELECT  
SETTINGS  
VIDEOS  
SELECT TV TYPE  
4:3 LB  
AUTO  
OFF  
HDMI COLOR SETTING  
HDMI ENHANCE SETTING  
SAVE  
RE  
T
UR  
SELECT  
SET  
N CANCEL  
2. CONFIRM  
E Select “SAVE”.  
1. SELECT  
SETTINGS  
VIDEOS  
SELECT TV TYPE  
4:3 LB  
AUTO  
OFF  
HDMI COLOR SETTING  
HDMI ENHANCE SETTING  
SAVE  
R
E
T
U
R
SELECT  
SET  
N CANCEL  
2. CONFIRM  
20  
   
EN  
FR  
ES  
Setting Items And Contents  
is the default setting.  
VIDEOS  
SELECT TV TYPE  
Configure the settings according to the TV to be connected. (If the screen size setting of the TV is fixed, the screen size  
setting of the TV remains the same even if you change the setting on this burner.)  
16:9  
When connected to a wide TV (16:9).  
When connected to a 4:3 TV (16:9 images will appear with black bands on the  
top and bottom).  
4:3LB  
When connected to a 4:3 TV (16:9 images will appear with the left and right  
sides missing).  
4:3PS  
HDMI COLOR SETTING  
Sets the video format from the COMPONENT VIDEO OUT of the burner.  
AUTO  
Normally selects this.  
RGB  
When images do not appear properly due to the specifications of the TV.  
HDMI ENHANCE SETTING  
Set this when connected to a DVI device.  
OFF  
ON  
Normally selects this.  
When connected to a DVI device and black-and-white images are not clear.  
DVD  
The following items will not take effect even if configured.  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
GENERAL  
LANGUAGE  
Sets the language to be displayed on the screen such as the “SETTINGS” screen.  
Set the language.  
(“ENGLISH” is set as the default language.)  
DATE DISPLAY STYLE  
Changes the date format.  
year.month.day  
month.day.year  
day.month.year  
Set the date format.  
RESET  
Returns the settings to default.  
21  
 
Screen Display  
Information during playback can be displayed on the screen.  
During playback  
When playing video saved from a high  
definition Everio camera  
............................................................................  
File Date (Displays the date and time of  
recording of the first file in the folder.)  
z Every press of the button changes the display mode.  
1.6.2006 00:00:00  
MPEG  
PRG001  
File Name  
Audio Format  
Auto mode (During video/still images playback only)  
Displays the playback status and playback time/  
playback position for 3 seconds when there is a change  
in status.  
00:00:24  
B.SKIP/F.SKIP  
Playback Status  
Playback Time/  
Playback Position  
REW/FF  
STOP  
PAUSE  
Operation Guide  
Half mode  
Displays the playback status and playback time/  
playback position.  
When playing still image saved from a high  
Full mode  
definition Everio camera  
............................................................................  
Displays all information including file name.  
Hide mode  
Folder Name  
File Date  
Hides the information.  
104JVCS0  
1.6.2006 00:00:00  
PIC_0001.JPG  
1920 x 1080  
File Name  
File Resolution  
Playback Status  
STOP SLIDESHOW  
Operation Guide  
When playing DVD video saved from an  
Everio camera  
............................................................................  
Chapter Number  
TITLE1  
CHAPTER1  
Title Number  
Audio Format  
00:00:08  
B.SKIP/F.SKIP  
Playback Status  
Playback Time/  
REW/FF  
STOP  
PAUSE  
Playback Position  
Operation Guide  
22  
 
EN  
FR  
ES  
Troubleshooting  
Trouble  
General  
Cause/Action  
z Make sure the AC adapter and power cord are connected properly.  
Cannot turn the power on.  
z This is not a malfunction.  
The burner or AC adapter is hot.  
z If the burner is abnormally hot, remove the AC adapter and consult  
the dealer from which you purchased the burner.  
After pressing the power button, it takes  
approximately 20 seconds before the burner  
becomes operable.  
z This is not a malfunction.  
z Turn the burner off, and then turn it back on again.  
Malfunction or error occurs.  
Saving  
z Make sure the USB cable is connected properly. Install the projected  
end of the terminal to the burner and the other end to the Everio  
camera.  
The Everio camera is not recognized.  
The PC is not recognized.  
z Make sure the USB cable provided for the Everio camera is connected  
properly.  
z A disc cannot be ejected by pressing the eject button if data is being  
written to the disc. Wait until writing finishes.  
z If a disc cannot be ejected with the eject button because of a failure  
or a malfunction caused by, for example, the burner being dropped,  
insert a thin rod of about 10 cm long into the force eject hole to eject  
the disc. (0P11)  
Cannot open the disc tray.  
z Insert the disc with the label facing up.  
z Make sure the disc tray is not dirty.  
z Make sure the writing surface of the disc is not damaged.  
z Make sure that special-shaped discs are not used.  
z Any CD that does not comply with standards such as the CD-DA  
standard (copy-control CDs) cannot be played.  
Reading fails.  
z For CD-R or CD-RW, make sure it is not recorded using the packet-  
write method.  
z Make sure an appropriate disc is being used. (0P25)  
z Use discs recommended for the burner. (0P26)  
z Make sure that a new disc is used for DVD-R.  
z Insert the disc with the label facing up.  
Writing fails.  
z Make sure the disc tray is not dirty.  
z Make sure the writing surface of the disc is not damaged.  
z Make sure that special-shaped discs are not used.  
z Connect the burner to the Everio camera, playback using “PLAY  
DVD” function of the camera, and dub the DVD discs with the DVD  
recorder. (Refer to the instruction manual of Everio.)  
It is impossible to dub the DVD discs, which were  
written with this burner, on a HDD-DVD recorder.  
z Make sure an appropriate disc is being used. (0P25)  
Writing/reading at maximum speed is not possible z Use discs recommended for the burner. (0P26)  
(when connected to PC).  
z Make sure a proper standard disc is being used. (Writing/reading at  
maximum speed may not possible if non-standard discs are used.)  
Playback  
z Remove the batteries, insert them again and operate the remote  
control.  
The remote control is not working.  
z Replace with new batteries.  
z Operation may be prohibited due to the disc or other conditions.  
z If the burner does not work at all, turn off the power and turn it on  
again. (It may not work properly due to lightning strike or static  
electricity.)  
Unable to operate.  
23  
 
Trouble  
Cause/Action  
z Is the video input displayed? Change to external output for the burner  
connected to a TV with video/audio input connectors.  
z When the image is not displayed on the TV after pressing the  
[RESOLUTION] button, do not operate the burner for 15 seconds.  
The resolution setting before the change is restored. (0P19)  
No images on the TV.  
z Check the resolution setting again. (0P19)  
Images are distorted during forward search or  
reverse search.  
z Images may be distorted for sections where the playback speed  
changes. This is not a malfunction.  
Commercial DVDs cannot be played when the  
burner is connected to PC.  
z Play the disc of which the region number of the DVD video is “ALL”  
or “2”.  
z Images added to the disc (multi-border disc) by PC cannot be played  
on this burner.  
Images added by PC cannot be played.  
It takes some time to display the images during  
still image playback.  
z The file size is too large or there are too many files. This is not a  
malfunction.  
When changing from special playback to normal  
playback, or during slow playback, mosaic  
pattern (block noise) appears.  
z This is not a malfunction.  
Error Messages  
Trouble  
Cause/Action  
z A blank disc is inserted.  
z Insert a disc that can be played on the burner. (0P25)  
UNREADABLE DISC  
z The disc may be dirty. Clean the disc and try again.  
z The disc was not finalized after saving from a high definition Everio  
camera. Make sure to finalize the disc after saving. (For details, refer  
to the instruction manual of the Everio camera.)  
DISC ERROR  
z Stop the playback and operate again.  
CANNOT OPERATE NOW  
HDCP INCOMPATIBLE, CANNOT DISPLAY  
USE HDCP COMPATIBLE MONITOR  
z Connect the burner to a HDCP compliant monitor.  
DETECTED COPY GUARD  
CANNOT DISPLAY WITH 1080i/720p  
SET TO 480i OR 480p  
z Make analog connection and set resolution to “480i” or “480p”.  
(0P19)  
z The data format is not compatible. Confirm the data format. (0P25)  
z The disc was not finalized after saving from a high definition Everio  
camera. Make sure to finalize the disc after saving. (For details, refer  
to the instruction manual of the Everio camera.)  
INCOMPATIBLE DATA  
CANNOT PLAY BACK  
z File data may be missing.  
24  
 
EN  
FR  
ES  
Specifications  
Weight  
General  
............................................................................  
Approx. 32 g (0.1 lbs)  
(including button battery)  
Power Supply  
DC12 V  
Rated current  
Recommended discs  
............................................................................  
1.7 A  
DVD-R  
Dimensions (W c H c D)  
171 c 56 c 262 mm (6-3/4" c 2-1/5" c 10-3/10")  
Weight of main unit  
JVC, TDK, Verbatim, SONY  
DVD-R DL*1  
JVC, Verbatim  
DVD-RW  
Approx. 1.4 kg (3.1 lbs)  
(excluding AC adapter and connection cables)  
Operating Environment  
JVC  
Operating temperature : 0 % to 40 % (32 $ to 104 $)  
Operating humidity : 35 % to 80 %  
Storage temperature : b20 % to 60 % (b4 $ to 140 $)  
z Optimal performance of the burner may not be possible  
depending on the disc used. Using discs of manufacturers  
for which compatibility has been confirmed is  
recommended.  
Laser Power  
z Only 12 cm discs can be used with this burner.  
For DVD  
Wavelength : 653 to 663 nm  
Output : 1.0 mW  
For CD  
Wavelength : 770 to 810 nm  
Output : 0.4 mW  
*1 DVD-R DL discs can be used when the burner is  
connected to a high definition Everio camera or a PC.  
CAUTION:  
z When a DVD-R disc is finalized, additional recordings to  
the disc are not possible. In addition, the disc cannot be  
formatted (initialized).  
z After finalizing a DVD-RW disc, additional recordings to  
the disc are possible by formatting (initializing) the disc.  
However, data (video/audio) saved will be deleted.  
AC adapter (AP-V400U)  
............................................................................  
Power Supply  
AC110 V to 240 V t, 50 Hz/60 Hz  
Input capacity  
Playback  
............................................................................  
1.5 A  
Compatible discs  
Output  
DVD-R, DVD-R DL, DVD-RW  
Data format (extension)  
DC12 V s, 4 A  
Operating temperature  
0 % to 40 % (32 $ to 104 $)  
Dimensions (W c H c D)  
z DVD data discs that are created using high definition  
Everio camera  
z DVD data discs that are created using Everio camera  
52 c 31 c 120 mm (2" c 1-1/5" c 4-7/10")  
z DVD data discs that are written with data taken by high  
definition Everio camera and edited using the provided  
editing software.  
(When a disc stops during playback and block noise  
occurs, disable the SVRT function in the editing  
software.)  
(excluding power cord)  
Weight  
Approx. 250 g (0.6 lbs)  
z Following are the file extensions recognized by this  
burner. (It is not guaranteed that the following file  
extensions can be played back.)  
Remote control (RM-V41U)  
............................................................................  
z When connected to an Everio camera: TOD, JPG  
Type  
z When connected to a PC: MOD, TPD, JPG  
z Others:  
MPG, MPEG, MPE, M2P, M2T, M2TS, TS, JPEG, JPE  
When playing files created on a PC, pressing the [I]  
button after searching may cause the playback  
position to deviate.  
DC 3 V (CR2025 button battery)  
Battery life  
Approx. 1 year (depending on the frequency of use)  
Operating distance  
Approx. 5 m (face up)  
Video output  
Operating temperature  
0 % to 40 % (32 $ to 104 $)  
Dimensions (W c H c D)  
42 c 12 c 100 mm (1-7/10" c 1/2" c 4")  
1.0 V 75 & (Pin jack)  
Audio output  
2.0 Vrms 1 k& (Pin jack)  
25  
 
Component video output  
Reading  
DVD-R : Maximum 12x  
Y p-p : 1.0 V 75 & (Pin jack)  
DVD-RW : Maximum 12x  
DVD-ROM : Maximum 5x  
DVD-R DL : Maximum 8x  
CD-R : Maximum 10x *2  
CD-RW : Maximum 10x *2  
CD-ROM : Maximum 10x *3  
CB/CR, PB/PR p-p : 0.7 V 75 & (Pin jack)  
HDMI output  
19-pin HDCP compliant  
Video :480p / 1080i / 720p  
(Compatibility with DVI-D is not guaranteed)  
Audio : 2CH PCM/Bit stream  
Compatible discs (8 cm discs cannot be used)  
CAUTION:  
Writing :  
DVD-R, DVD-R DL, DVD-RW  
Reading :  
z Discs other than those stated above, and commercially  
available DVD videos cannot be played back properly.  
DVD-R, DVD-R DL, DVD-RW, DVD-ROM, DVD video,  
CD-ROM, CD-DA *4, CD Extra, Video CD, Mixed CD,  
CD-R, CD-RW  
When connected to an Everio camera  
............................................................................  
Supported software  
Interface  
CyberLink PowerCinema NE for Everio/  
PowerProducer 3 NE (Provided for Everio camera)  
CyberLink Power2Go 5.5 Lite (provided)  
USB2.0  
Interface cable  
USB cable (Mini type A b Mini type B)  
Compatible discs for writing (8 cm discs cannot be used)  
*1 If you use USB1.1 cable, it will take approximately 3  
hours to write one DVD.  
Everio : DVD-R, DVD-RW (6x DVD-RW discs cannot be  
used)  
*2 Any CD recorded using the packet-write method cannot  
be played.  
High definition Everio : DVD-R, DVD-R DL, DVD-RW  
*3 Operation is not guaranteed for any CD not compliant  
with the CD-DA standard (copy control CD).  
Recording format  
*4 It may not be possible to read the audio files depending  
on the music CDs (CD-DA). In this case, make use of  
applications such as Windows Media Player.  
Everio : DVD video (video only)  
High definition Everio : Data DVD (video, still image)  
Recording time  
Everio :  
Approx. 30 minutes (including time taken for  
finalization)  
z Approx. 90 minutes of video recorded in fine mode  
on a 4.7 GB disc. (Varies depending on conditions  
such as number of titles.)  
High definition Everio :  
Approx. 35 minutes (including time taken for  
finalization)  
z Approx. 40 minutes of video recorded in full HD  
mode on a 8.5 GB DVD-R DL disc. (Varies depending  
on conditions such as number of titles.)  
z GZ-MC100, GZ-MC200, GZ-MC500, GZ-MG40,  
GZ-MG50, GZ-MG70 cannot be used.  
When connected to a PC  
............................................................................  
Interface  
USB2.0, USB1.1 *1  
Interface cable  
USB cable (USB cable provided for the Everio camera  
can also be used.)  
Supported operating systems  
Windows XP Home Edition, Windows XP Professional  
(Macintosh is not supported.)  
Data buffer capacity  
2 MB  
Data transfer rate (for USB2.0)  
Writing  
DVD-R : Maximum 8x  
DVD-R DL : Maximum 4x  
DVD-RW : Maximum 4x  
26  
EN  
FR  
ES  
Memo  
27  
Printed in China  
0307MNH-SW-BJ  
© 2007 Victor Company of Japan, Limited  

Jenn Air JGD8130ADS User Manual
JVC LCT1445 001A User Manual
KitchenAid Cooktop KGCC566H User Manual
Kyocera 1155 User Manual
Lava Computer Computer Hardware MOKO L75 2 User Manual
LG Electronics LG Life Good Computer Monitor E2351TC User Manual
Miele KM 5758 User Manual
Panasonic DIGA DMR E75V User Manual
Panasonic VW BN1 User Manual
Philips 20PT2012 User Manual