Inline Warehouse Computer Hardware CIA100 User Manual

CIA100 COMPUTER INTERFACE

CIA100

OPERATION MANUAL

Product Overview

DESCRIPTION

The CIA100 is a high-performance computer video interface for analog video signals including VGA,

SVGA, XGA, SXGA, UXGA, MAC, SUN and other high-resolution workstations. The CIA100’s

compact design allows users to place it in a variety of locations or permanently mount it to virtually

any flat surface (using the optional IN9250 mounting brackets). Like other INLINE interfaces, the

CIA100 performs the following functions:

•

Signal Splitting - allows the simultaneous connection and viewing of both the computer's

local monitor and a second output device such as an LCD data projector or a presentation

monitor.

•

Physical Interfacing - Because computers employ many different types of video output

connectors, it is sometimes difficult to directly connect them to data projection devices. The

CIA100 simplifies interfacing tasks by acting as a universal adapter. Through the use of

removable input cables, the CIA100 can be attached to different computers and will provide a

video output signal on five BNC connectors. The output signal may be set to RGBHV

(default), RGBS or RGsB formats.

The CIA100 is not a scan converter. The data projector, monitor or other

output device must be compatible with the horizontal scan rate, vertical

scan rate and resolution output by the computer video card.

PRODUCT FEATURES

•

15-Pin HD Female Connectors - The CIA100 connects directly to VGA graphics cards and

VGA local monitors via high-resolution coaxial VGA extension cables.

Ultra High-Resolution Amplification - The CIA100 provides superb performance with

analog video signals at any resolution.

Selectable Output Sync Format - The unit can be set for RGBHV (default), RGBS or RGsB

output sync as required by the data display device and signal distribution system.

•

Buffered Local Monitor Output - ensures the highest quality display on a local monitor.

One-Button Monitor Emulation - makes it easy to use the interface without a local monitor.

New Soft-Touch Rocker Button for Horizontal Position Control - allows precise centering

of the image within the data display area.

•

400 MHz Bandwidth

CIA100 Operation Manual - V1.3 01/03/01

Compatibility

INPUT

The CIA100 will accept high-resolution video signals from virtually any computer that outputs an

analog video signal. The unit will work with signals at virtually any resolution and refresh rate.

Compatible computer video signals include VGA, SVGA, XGA, SXGA, UXGA, MAC, SUN,

SGI and other high-resolution computers outputting an analog video signal. Input signal

compatibility parameters are listed below.

Video Signal:

Signal format:

Analog RGB Video

RGBHV, RGBS, RGsB*

Horizontal Frequency Range: 30 KHz to 130 KHz

Vertical Refresh Rates: 30 Hz to 120 Hz

* The CIA100 will operate with RGsB input signals. However, the unit

will not strip sync off of the green. RGsB input signals are always output

as RGsB (they cannot be output as RGBS or RGBHV). Also, the horizontal

position control will not operate when used with RGsB input signals.

OUTPUT

The output signal of the CIA100 is analog RGB video with TTL sync on 3, 4 or 5 female BNC

connectors. The output format can be set to RGBHV, RGBS or RGsB using dipswitches. This

output signal is compatible with high-resolution data grade monitors and data / graphics

projectors.

VGA, MAC, SUN, SGI and other high-resolution workstations operate in

several video modes encompassing a wide range of resolutions and scan

rates. Many of the video signals from the newest models can run as high

as 70 KHz or more, with the newest VGA cards offering an output resolu-

tion of 1600 x 1200 (some can even go as high as 1920 x 1080). The data

projector or monitor connected to the interface output must be compatible

with the horizontal scan rate and vertical refresh rate of the computer’s

video signal. Please check the documentation for both the computer

graphics card and the data display device to ensure compatibility.

CIA100 Operation Manual - V1.3 01/03/01

Installation

This section offers step-by-step instructions for installing the CIA100. An Application Diagram is

provided on page 5, and Front and Rear Panel Connector and Control Diagrams are on page 6.

Note: Read the instructions carefully before initiating the installation procedure. Before you

begin, make sure that there is no power connected to any components in the display system, and

that all the power buttons are off.

1.) Place / install the CIA100 at the desired location, making sure that the unit is seated on a flat

surface. The unit can be mounted to virtually any flat surface using the optional IN9250 L

Mounting Brackets that attach to the sides of the unit. Run the video coax cable to the interface.

Note: The optional IN9251 Flush Mount Brackets are available for mounting the CIA100 through a

hole in the tabletop.

2.) Set the dipswitches as appropriate for your installation (see page 7 for more details). The

CIA100 factory default output format is RGBHV. If your display device, routing system, or

cabling require a different format, use the dipswitches to change the output signal to RGBS or

RGsB as necessary. For best results with high-resolution data projectors / presentation

monitors, refer to the OPTIMAL SETTINGS FOR LCD / DMD / ILA / D-ILA / PLASMA

DISPLAYS Section on page 8.

3.) Turn the computer and computer monitor off. Disconnect the monitor from the video output

port on the computer.

4.) Connect the CIA100 video output (5 BNC connectors) to the data display device’s RGB input,

using three, four, or five high-resolution BNC cables or a multi-conductor RGBHV, RGBS, or

RGB "snake". The IN7000 Series, IN7200 Series, IN7300 Series and IN7400P Series high-

resolution cables are well suited for this purpose. Take care while making connections to

ensure that the red output is connected to the red input, green output to the green input, etc..

5.) Connect the computer graphics card to the CIA100 15-pin video input port.

•

PC / MAC / SGI Computers with 15-pin HD Video Ports - can be connected via

IN8000M-1 / IN8200M-1 Series high-resolution coaxial VGA cables.

Older Macintosh (15-pin D) / SUN (13W3) / Workstations (4 or 5 BNC) - can be connected

using the appropriate input / output cables listed in the chart on the following page.

6.) Connect the local computer monitor (if applicable) to the local monitor output port of the CIA100.

Monitors with 15-pin VGA connectors will attach directly to the interface. For other types of

monitors, refer to the table on the next page.

If a local monitor is required, disengage the monitor emulation feature by

pressing the Monitor Emulation Button. See page 8 for more details.

CIA100 Operation Manual - V1.3 01/03/01

7.) Apply power to the CIA100 using the IN9205 9 VDC; 1.0A power supply (included). The

power LED on the front of the unit will illuminate.

8.) Complete the installation by turning the computer and computer monitor on. If required,

adjust the horizontal position control to center the image on the data display device (see the

Horizontal Position Control Section on page 7 for more details).

ADAPTER / EXTENSION CABLES FOR INPUT AND LOCAL MONITOR OUTPUT

The CIA100 has 15-pin HD VGA-type input and local monitor output connector ports. The

following cables / adapters are available:

Computer

VGA: 15-Pin HD

Input Cable (M-M)

Output Cable (M-F)

3’

6’

12’

25’

35’ +

IN8003M-1 IN8006M-1 IN8012M-1 IN8025M-1 IN80xxM-1

IN8006-1

IN9140M

IN8012-1

IN8025-1

IN80xx-1

MAC with 15-Pin D:

Input Cable (M-M)

Output Cable (M-F)

IN9144M

IN9145

IN9141

MAC G3, G4 and PowerBook with 15-Pin HD*:

Input Cable (M-M)

Output Cable (M-F)

IN8006M-1 IN8012M-1 IN8025M-1 IN80xxM-1

IN8006-1

IN8012-1

IN8025-1

IN80xx-1

SUN: 13W3 (may also be used with SGI with RGsB output)

Input Cable (M-M)

Output Cable (M-F)

IN9142M

IN9146M

IN9147

IN9143

Workstation: 5 BNC / RGBHV

Input Cable (M-M)

Output Cable (M-M)

IN9045-L6 IN9045-L12 IN9045-L25 IN9045-Lxx

Workstation: 4 BNC / RGBS

Input Cable (M-F)

IN9100

*Newer Mac G3 models (with translucent cases) have 15-Pin HD connectors (pins arranged in 3 rows).

Older G3 models (with solid white enclosures) incorporate 15-Pin D connectors (pins arranged in 2 rows).

CIA100 Operation Manual - V1.3 01/03/01

CIA100 FRONT PANEL CONNECTORS AND CONTROLS

Horizontal

Position

Control

Monitor

Emulation with

LED Indicator

Video

Input

Local

Monitor

Output

Power

Indicator

CIA100 REAR PANEL CONNECTORS AND CONTROLS

Dip

Switches

Power

Connector

Video

Output

Connectors

CIA100 Operation Manual - V1.3 01/03/01

HORIZONTAL POSITION CONTROL

The location of the horizontal position control is shown in the Front Panel Connectors and

Controls Diagram on the previous page. Press and release the rocker button to shift the image by

one step to the left or right. Press and hold the button to shift the image continuously.

Note: The horizontal position control has no effect on the local computer monitor.

If the horizontal position adjustment is set to an extreme position on either the display device or

the CIA100, the output image may appear dark and / or the colors may be displayed improperly.

To position the video image and achieve optimum picture quality:

1. Set the display device’s horizontal position control to the center of its adjustment range.

2. Adjust the horizontal position control on the CIA100 until the picture is centered properly

on the display device.

Note: The horizontal position control does not work with RGsB input signals.

DIPSWITCH SETTINGS

Most installations will not require any changes to the dipswitch settings. The factory default and

specialized dipswitch settings are indicated below.

Factory Default Settings:

Dipswitches ON:

Horizontal Position Control:

Signal Format:

1, 3 & 4

Enabled

RGBHV

Enabled

Monitor Emulation at Power Up:

The following table lists the functions of the 6 dipswitches:

DIPSWITCH

FUNCTION

SETTING

On = Enabled*

Off = Disabled

On = RGsB

Off = RGBS / RGBHV*

On = RGBHV*

Off = RGBS

Horizontal Position Control

Output Sync Format

(sync on green)

Output Sync Format

(RGBS or RGBHV)

Monitor Emulation

at power up

On = Enabled*

Off = Disabled

Reserved

* Factory Default Setting

CIA100 Operation Manual - V1.3 01/03/01

MONITOR EMULATION

The factory default setting for the CIA100 is Monitor Emulation Enabled. If the application

requires a local monitor, make sure that the front panel Monitor Emulation LED is OFF (press

the MONITOR EMULATION Button to toggle between enabled / disabled). If no local monitor

is necessary, make sure the Monitor Emulation LED is ON.

OPTIMAL SETTINGS FOR LCD / DMD / D-ILA / PLASMA DISPLAYS

Output Sync Format - All CIA100 Series Interfaces feature advanced sync processing circuitry

that offers superb compatibility with a wide range of display devices. The CIA100 has been

designed (and extensively tested) to provide excellent operation when set for RGBHV, RGBS and

RGsB output signal formats. However, some display devices most readily identify and display

VGA-type signals when they are in the RGBHV signal format. For this reason, users may achieve

optimal compatibility and more consistent results when the interface is set to the factory default

output sync format of RGBHV (see Dipswitch Settings on page 7).

Horizontal Position Control - The CIA100 horizontal position control utilizes a new circuit

design that provides excellent image quality and greatly enhanced compatibility with a variety of

data display technologies. However, in rare cases, instability in parts of the displayed image may

still occur (depending on the design of the display device’s sync circuitry). Adjusting the data

display’s fine phase or auto phase adjustment will usually alleviate the problem. If problems

persist, users may wish to disable the CIA100 horizontal position control (see page 7).

CIA100 Operation Manual - V1.3 01/03/01

Specifications

CIA100 Computer Interface

(1) 15-pin HD female - standard VGA pin-outs

Input

Connector Type

RGB Video Signals

Input Impedance

Sync Signals

Horizontal Scan Rate

Vertical Sync Range

Analog, 1.5 Vp-p max.

75 ohm

TTL compatible

30 KHz - 130 KHz

30 Hz - 120 Hz

Output

Local Monitor (Buffered)

Main Output

15-pin HD female - standard VGA pin-outs

(5) female BNC connectors

Output Signal Formats

RGB Signals

Bandwidth

RGBHV, RGBS or RGsB

Analog Video, 75 ohm impedance

400 MHz @ -3 dB with 0.7 Vp-p input signal

Dimensions

Size (including faceplate)

Product Weight

1.65” H x 4.1” W x 4.3” D / 4.2 cm x 10.3 cm x 11 cm

0.7 lbs. / 0.32 kg.

Shipping Weight

2.4 lbs. / 1.1 kg.

Power

Power Supply

Regulatory Compliance

Safety

9 VDC, 1A Power Supply (included)

UL 1950, CAN/CSA-22.2 No. 950 3^rdEd.

FCC class A; CE: EN50022 (1987), EN50081-1 (1991),

EN50082-1 (1992 & 1994), EN60950-92

EMI

Parts Included

(1) CIA100 Interface

(1) IN9205 External Power Supply: 9 VDC; 1.0A

(1) IN9339 Adjustment Tool with Technician’s Blade

(1) Operation Manual

Required Accessories (Ordered Separately)

Input and Local Monitor Adapter and Extension Cables:

VGA: IN8000 Series 15-pin HD male to 15-pin HD female, various lengths from 3’ to 100’

For Other Computers: Refer to the table on page 4

Optional Accessories

Power Accessories:

IN9210: Rack Mountable Power Supply (powers up to ten 9VDC / 12VDC devices)

Mounting Hardware:

IN9250: L Mounting Brackets - For Mounting CIA100 to Flat Surface

IN9251: Flush Mount Brackets - For Mounting CIA100 Through Hole in Table Top

CIA100 Operation Manual - V1.3 01/03/01

RGB Installation Cables

Coaxial Cables

Standard Resolution

Standard Resolution, Plenum

Super High Resolution

Super High Resolution, Plenum

Ultra High Resolution

3-Conductor

4-Conductor

5-Conductor

IN7000-5

IN7000P-5

IN7300-5

IN7400P-5

IN7200-6

IN7000-4

IN7000P-4

IN7300-4

IN7300-3

IN7200-3

IN7200-5

All cable grades are available in lengths from 3’ to 250’ pre-terminated with high quality BNC connectors or as bulk cable.

Troubleshooting

Problem: The display device connected to the CIA100 output has a bad / scrambled image.

Solution 1: Verify that the correct input cable is being used (see table on page 4).

Solution 2: The display device connected to the output of the interface may not be

compatible with the computer output. PC, MAC, SUN and other high-resolution

workstations have new and ultra high-resolution modes such as 1600 x 1200 and

1800 x 1440, and can output a video signal with a horizontal scan rate of over 100 KHz!

Many data monitors and data projectors are not compatible with these resolutions and

frequencies.

Solution 3: Check the dipswitch settings to make sure the unit is putting out a sync

format that the display device can use. For most applications, the default dipswitch

settings will work best (see page 7). For LCD / DMD / D-ILA / Plasma Display devices,

you may have to disable the horizontal position control.

Solution 4: The RGBS or RGBHV cable may have a bad sync line. Try running the sync

through another cable.

Problem: The power LED is on but there is no image on the display device.

Solution: Check the RGBHV cable connections at the interface output and at the

display device input to make sure that the vertical and horizontal sync wires are not

reversed.

Problem: The output image is very dark.

Solution: The CIA100 horizontal position control may be set off to an extreme setting

or may be interacting poorly with the horizontal position control on the display device.

Follow the horizontal position adjustment procedure on page 7.

Problem: The local monitor looks fine but the image on the Data Projector / Data Display

is wavy or has vertical bars in the picture.

Solution 1: Set the interface to RGBHV output.

Solution 2: Disable the horizontal position control.

Solution 3: LCD / DMD displays often have an adjustment called Phase Adjust or Fine

Phase Control. This control should be adjusted to provide the best image.

CIA100 Operation Manual - V1.3 01/03/01

Problem: The output image is missing a color.

Solution: Possibly the RGBS or RGBHV cable is bad. Try switching connections on

the output to verify that the bad color’s cable is OK (Example: If there is no red, try

running the green output through the red cable and see if the green is displayed or not).

Problem: The output image is too green.

Solution: The dipswitch settings may be set for sync on green output and the display

device doesn’t like that format. Try changing the dipswitches to output an RGBS or

RGBHV signal.

Problem: The horizontal position control is not working.

Solution 1: Check the dipswitch settings to see if the horizontal position control has been

disabled.

Solution 2: The input signal may be RGsB (sync on green). The horizontal position

control does not work with RGsB input signals.

Problem: The output image is doubled, with two images displayed side-by-side.

Solution: The display device may not be compatible with the horizontal scan rate of the

computer. This problem often occurs when a 31.5 KHz VGA signal is sent into an RGB

monitor that is only compatible with signals at 15.75 KHz.

If problems persist, call INLINE Technical Services at (714) 921-4100 for further assistance.

CIA100 Operation Manual - V1.3 01/03/01

Warranty

♦

INLINE warrants the equipment it manufactures to be free from defects in materials and

workmanship.

If equipment fails because of such defects and INLINE is notified within two (2) years

from the date of shipment, INLINE will, at its option, repair or replace the equipment at

its plant, provided that the equipment has not been subjected to mechanical, electrical or

other abuse or modifications.

♦

Equipment that fails under conditions other than those covered will be repaired at the

current price of parts and labor in effect at the time of repair. Such repairs are warranted

for ninety (90) days from the day of re-shipment to the Buyer.

This warranty is in lieu of all other warranties expressed or implied, including without

limitation, any implied warranty or merchantability or fitness for any particular purpose,

all of which are expressly disclaimed.

The information in this manual has been carefully checked and is believed to be accurate. However,

INLINE, Inc. assumes no responsibility for any inaccuracies that may be contained in this manual. In

no event will INLINE, Inc. be liable for direct, indirect, special, incidental, or consequential damages

resulting from any defect or omission in this manual, even if advised of the possibility of such damages.

The technical information contained herein regarding CIA100 features and specifications is subject to

change without notice.

Apple, Mac and Macintosh are registered trademarks of Apple Computer, Inc. Sun, Sun Microsystems,

and the Sun Logo are trademarks or registered trademarks of Sun Microsystems, Inc. in the United

States and other countries. SGI is a trademark of Silicon Graphics, Inc. All other trademarks and

registered trademarks are the property of their respective companies.

♦

INLINE, INC.

810 West Taft

Orange, CA 92865

♦

(800) 882-7117

(714) 450-1800

FAX (714) 450-1850

www.inlineinc.com

CIA100 Operation Manual - V1.3 01/03/01

IBM 31P6240 User Manual
iHome iConnect IH K230MB User Manual
Intel Computer Hardware CB60 BX User Manual
LG Electronics FLATRON L1960TR BF User Manual
Moffat Blue Seal Evolution Series E514B LS User Manual
NetComm V35 User Manual
Philips 21PT4475 User Manual
Philips 32FL2884 User Manual
Philips HDR3810 User Manual
Philips Mono FSQ 21PT1546 User Manual