Iiyama Computer Monitor E2607WSD User Manual

USER MANUAL  
ENGLISH  
DEUTSCH  
FRANÇAIS  
NEDERLAND  
POLSKI  
Thank you very much for choosing the iiyama  
LCD monitor.  
We recommend that you take a few minutes to  
read carefully through this brief but  
comprehensive manual before installing and  
switching on the monitor. Please keep this  
manual in a safe place for your future  
reference.  
日本語  
CE MARKING DECLARATION OF CONFORMITY  
This LCD monitor complies with the requirements of the EC Directive 2004/108/EC “EMC Directive” and  
2006/95/EC “Low Voltage Directive”.The electro-magnetic susceptibility has been chosen at a level that gives  
correct operation in residential areas,business and light industrial premises and small-scale enterprises, inside  
as well as outside of the buildings.All places of operation are characterised by their connection to the public  
low voltage power supply system.  
We recommend recycling of used product. Please contact your dealer or iiyama service center. Recycle  
You can access the Web page of different countries from there.  
We reserve the right to change specifications without notice.  
All trademarks used in this user manual are the property of their respective owners.  
As an ENERGY STAR® Partner, iiyama has determined that this product meets the ENERGY STAR® guidelines for energy  
efficiency.  
TABLE OF CONTENTS  
FOR YOUR SAFETY.............................................................................. 1  
SAFETY PRECAUTIONS ................................................................ 1  
SPECIAL NOTES ON LCD MONITORS.......................................... 3  
CUSTOMER SERVICE.................................................................... 3  
CLEANING....................................................................................... 3  
BEFORE YOU OPERATE THE MONITOR............................................ 4  
CHECKING THE CONTENTS OF THE PACKAGE......................... 4  
HOW TO USE THE STAND............................................................. 5  
CONTROLS AND CONNECTORS .................................................. 6  
CONNECTING YOUR MONITOR.................................................... 7  
COMPUTER SETTING.................................................................... 8  
ADJUSTING THE VIEWING ANGLE............................................... 8  
OPERATING THE MONITOR................................................................. 9  
ADJUSTMENT MENU CONTENTS.................................................10  
SCREEN ADJUSTMENTS...............................................................14  
POWER MANAGEMENT FEATURE ...............................................17  
TROUBLE SHOOTING ..........................................................................18  
APPENDIX ............................................................................................20  
SPECIFICATIONS : ProLite E2607WS.............................................20  
SPECIFICATIONS : ProLite E2607WSD...........................................21  
SPECIFICATIONS : ProLite E2607WSV...........................................22  
DIMENSIONS....................................................................................23  
COMPLIANT TIMING........................................................................23  
FOR YOUR SAFETY  
SAFETY PRECAUTIONS  
WARNING  
STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE  
If you notice any abnormal phenomena such as smoke, strange sounds or fumes, unplug the monitor  
and contact your dealer or iiyama service center immediately. Further use may be dangerous and can  
cause fire or electric shock.  
NEVER REMOVE THE CABINET  
High voltage circuits are inside the monitor. Removing the cabinet may expose you to the danger of  
fire or electric shock.  
DO NOT PUT ANY OBJECT INTO THE MONITOR  
Do not put any solid objects or liquids such as water into the monitor. In case of an accident, unplug  
your monitor immediately and contact your dealer or iiyama service center. Using the monitor with any  
object inside may cause fire, electric shock or damage.  
INSTALL THE MONITOR ON A FLAT, STABLE SURFACE  
The monitor may cause an injury if it falls or is dropped.  
DO NOT USE THE MONITOR NEAR WATER  
Do not use where water may be splashed or spilt onto the monitor as it may cause fire or electric  
shock.  
OPERATE UNDER THE SPECIFIED POWER SUPPLY  
Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will  
cause malfunction and may cause fire or electric shock.  
PROTECT THE CABLES  
Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy  
objects on the cables. If damaged, the cables may cause fire or electric shock.  
ADVERSE WEATHER CONDITIONS  
It is advisable not to operate the monitor during a heavy thunder storm as the continual breaks in  
power may cause malfunction. It is also advised not to touch the plug in these circumstances as it  
may cause electric shock.  
FOR YOUR SAFETY  
1
CAUTION  
INSTALLATION LOCATION  
Do not install the monitor where sudden temperature changes may occur, or in humid, dusty or smoky  
areas as it may cause fire, electric shock or damage. You should also avoid areas where the sun  
shines directly on the monitor.  
DO NOT PLACE THE MONITOR IN A HAZARDOUS POSITION  
The monitor may topple and cause injury if not suitably located. Please also ensure that you do not  
place any heavy objects on the monitor, and that all cables are routed such that children may not pull  
the cables and possibly cause injury.  
MAINTAIN GOOD VENTILATION  
Ventilation slots are provided to keep the monitor from overheating. Covering the slots may cause fire.  
To allow adequate air circulation, place the monitor at least 10 cm (or 4 inches) from any walls.  
Do not remove the tilt stand when operating the monitor. Ventilation slots on the back of the cabinet  
will be blocked and the monitor may overheat if the stand is removed. This may cause fire or damage.  
Operating the monitor on its back, side, upside down or on a carpet or any other soft material may  
also cause damage.  
DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR  
When you move the monitor, turn off the power switch, unplug the monitor and be sure the signal cable  
is disconnected. If you do not disconnect them, it may cause fire or electric shock.  
UNPLUG THE MONITOR  
If the monitor is not in use for a long period of time it is recommended that it is left unplugged to avoid  
accidents.  
HOLD THE PLUG WHEN DISCONNECTING  
To disconnect the power cable or signal cable, always pull it by the plug. Never pull on the cable itself  
as this may cause fire or electric shock.  
DO NOT TOUCH THE PLUG WITH WET HANDS  
Pulling or inserting the plug with wet hands may cause electric shock.  
WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER  
Be sure the computer is strong enough to hold the weight of the monitor, otherwise, you may damage  
your computer.  
DO NOT PUT FLOPPY DISKS NEAR THE SPEAKERS  
Magnetically recorded data, such as on a floppy disk, may become corrupted by the magnetic field  
produced by the speakers if the disks are placed on or near the speakers.  
OTHERS  
ERGONOMIC RECOMMENDATIONS  
To eliminate eye fatigue, do not operate the monitor against a bright background or in a dark room.  
For optimal viewing comfort, the monitor should be just below eye level and 40-60 cm (16-24 inches)  
away from your eyes. When using the monitor over a prolonged time, a ten minute break every hour  
is recommended as looking at the screen continuously can cause eye strain.  
2
FOR YOUR SAFETY  
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitors and do not indicate a problem.  
When you first turn on the LCD monitor, the picture may not fit in the display area  
because of the type of computer that is used. In this case, adjust the picture position  
to the correct position.  
NOTE  
Due to the nature of the backlight, the screen may flicker during initial use. Turn off  
the Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop  
pattern you use.  
Due to the nature of the LCD screen, an afterimage of the previous screen may  
remain after switching the image, when the same image is displayed for hours. In  
this case, the screen is recovered slowly by changing the image or turning off the  
Power Switch for hours.  
Contact your dealer or iiyama service center for the backlight replacement when the  
screen is dark, flickering or not lighting up. Never attempt to replace it by yourself.  
CUSTOMER SERVICE  
NOTE  
The fluorescent light used in the LCD monitor may have to be periodically replaced.  
For the warranty coverage on this component, please check with local iiyama service  
center.  
If you have to return your unit for service and the original packaging has been discarded,  
please contact your dealer or iiyama service center for advice or replacement  
packaging.  
CLEANING  
WARNING  
CAUTION  
NOTE  
If you drop any materials or liquids such as water into the monitor when cleaning, unplug  
the power cable immediately and contact your dealer or iiyama service center.  
For safety reasons, turn off the power switch and unplug the monitor before you  
clean it.  
To protect the LCD panel, do not scratch or rub the screen with a hard object.  
Never use any of the following strong solvents. These will damage the cabinet and  
the LCD screen.  
Spray-type cleaner  
Wax  
Thinner  
Benzine  
Acid or Alkaline solvent  
Abrasive cleaner  
Touching the cabinet with any product made from rubber or plastic for a long time may  
cause degeneration or loss of paint on the cabinet.  
Stains can be removed with a cloth lightly moistened with a mild detergent solvent. Then  
wipe the cabinet with a soft dry cloth.  
CABINET  
LCD  
Periodic cleaning with a soft dry cloth is recommended.  
SCREEN  
Don't use tissue paper etc. because these will damage the LCD screen.  
FOR YOUR SAFETY  
3
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
65cm (26") TFT Color LCD Monitor  
Supports Resolutions up to 1920 × 1200  
High Contrast 1000:1 , ACR Function Available/ High Brightness 300cd/m2 /  
Quick Response Time 2ms (Gray to Gray)  
Stereo Speakers  
2 × 5W Stereo Speakers  
HDMI interface:ProLite E2607WS  
Plug & Play VESA DDC1/2B Compliant  
Windows® 95/98/2000/Me/XP/Vista Compliant  
Power Management (ENERGY STAR® VESA DPMS Compliant)  
VESA Mounting Standard (200mm x 100mm) Compliant  
CHECKING THE CONTENTS OF THE PACKAGE  
The following accessories are included in your package. Check to see if they are enclosed with the  
monitor. If anything is missing or damaged, please contact your local iiyama dealer or regional iiyama  
office.  
Power Cable*1  
VGA Cable  
Audio Cable  
DVI-D Cable*2  
User Manual  
Stand  
*1 The rating of the Power Cable enclosed in 120V area is 10A/125V. If you are using  
a power supply higher than this rating, then a power cable with a rating of 10A/  
250V must be used.However, all guarantees and warranties are void for any  
problems or damage caused by a power cable not supplied by iiyama.  
*2 Accessary for ProLite E2607WS  
CAUTION  
4
BEFORE YOU OPERATE THE MONITOR  
HOW TO USE THE STAND  
The monitor is shipped with the stand detached. Be sure to attach the stand before operating the  
display and remove if it is necessary to re-box.  
Install the Stand on a stable surface. The monitor may cause injury or damage if  
it falls or is dropped.  
CAUTION  
Do not give a strong impact to the monitor. It may cause damage.  
Unplug the monitor before installation to avoid electric shock or damage.  
1. Lay the monitor flat on a table with front face down (see Fig 1). Put a piece of soft cloth on the  
table beforehand to prevent the monitor from being scratched.  
2. Unpack the stand and mount it onto the monitor base with aligning it to the hook (see Fig 2).  
3. Slide the stand upward until it makes a click sound, indicating it is fixed (see Fig 3).  
4. Stand the monitor up (see Fig 4).  
(Fig 1)  
(Fig 2)  
(Fig 3)  
(Fig 4)  
BEFORE YOU OPERATE THE MONITOR  
5
CONTROLS AND CONNECTORS  
11  
12  
13  
  
    
<Front>  
<Back>  
Menu / Input Select shortcut keys ( )*1  
1
Scroll Down / Brightness/Contrast/ACR/ECO shortcut keys(  
)
Scroll Up / OptiColor Mode ( )*4  
Select / Input select ( 2 )  
Power Indicator  
Blue:  
Normal operation  
Orange: Power Management  
The monitor enters into power management mode which reduces  
NOTE  
the power consumption to less than 2W when receiving no horizontal and/  
or vertical sync signal.  
11  
Power Switch (  
)
AC Connector (Power IN)  
DVI-D 24Pin Connector (DVI)*5  
HDMI Connector (HDMI)*2  
D-SUB mini 15pin Connector (VGA)  
Audio Connector (AUDIO IN)  
Keyhole for Security Lock *3  
Speakers  
12  
13  
*1 Input Select shortcut keys is available under no signal input.  
NOTE  
*2 Available for ProLite E2607WS only.  
*3 You can fasten a security lock and cable to prevent the monitor from being removed  
without your permission.  
*4 OptiColor Mode: Press the  
Button when the Menu is not displayed.  
*5 Not available for ProLite E2607WSV  
6
BEFORE YOU OPERATE THE MONITOR  
CONNECTING YOUR MONITOR  
Ensure that both the computer and the monitor are switched off.  
Connect the computer to the monitor with the signal cable.  
Connect the monitor to the audio equipment with the Audio Cable for computer when using the  
audio features.  
Connect the Power Cable to the monitor first and then to the power supply.  
The signal cables used for connecting the computer and monitor may vary with the type of  
computer used. An incorrect connection may cause serious damage to both the monitor and  
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector.  
If a special cable is required please contact your local iiyama dealer or regional iiyama  
office.  
NOTE  
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama  
office for a suitable adaptor.  
Make sure you tighten the finger screws at each end of the signal cable.  
[Example of Connection]  
Computer  
NOTE  
Power Cable (Accessory)  
DVI-D Cable (Accessory for ProLite E2607WS and ProLite E2607WSD )  
HDMI Cable (not Supplied)  
D-Sub Signal Cable (Accessory)  
Audio Cable (Accessory)  
BEFORE YOU OPERATE THE MONITOR  
7
COMPUTER SETTING  
Signal Timing  
Change to the desired signal timing listed on page 22: COMPLIANT TIMING.  
Windows 95/98/2000/Me/XP/Vista Plug � Play  
The iiyama LCD monitor complies with DDC1/2B of VESA standard. The Plug � Play function runs  
on Windows 95/98/2000/Me/XP/Vista by connecting the monitor to DDC1/2B compliant computer  
with the Signal Cable supplied.  
For installation on Windows 95/98/2000/Me/XP/Vista: The monitor Information File for iiyama monitors  
may be necessary for your computer and obtained via the Internet, using the address:  
For additional information on how to download the driver for your touch screen monitor,  
NOTE  
please access the internet site noted above.  
Monitor Drivers are not required in most cases for Windows Vista, Macintosh or Unix  
operating systems. For further information, please contact your computer dealer  
first for advice.  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the full face  
of the monitor.  
Hold the stand so that the monitor does not topple when you  
change the monitor’s angle.  
You are able to adjust the monitor’s angle up to 20 degrees  
backward. (The indication of 20 degrees: tilted LCD panel holds  
for a moment at this point. Tilt the panel gently; using too much  
force can easily cause the tilt angle to exceed 20 degrees.)  
In order to ensure a healthy and relaxed body position  
when using the monitor at visual display workstations, it is  
NOTE  
recommended that the adjusted tilt angle should not exceed 10  
degrees. Adjust the monitor’s angle to your own preference.  
NOTE  
Do not touch the LCD screen when you change  
the angle. It may cause damage or break the LCD  
screen.  
NOTE  
Careful attention is required not to catch your fingers  
or hands when you change the angle.  
Do not tilt the post beyond 20 degrees except when  
repacking the monitor in its box.  
To do so may cause the monitor to fall over and  
break.  
8
BEFORE YOU OPERATE THE MONITOR  
OPERATING THE MONITOR  
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT  
TIMING shown on page 21. You are also able to adjust the picture by following the button operation  
shown below. For more detailed adjustments, see page 14 for SCREEN ADJUSTMENTS.  
Press the Menu Button to start the On Screen Display feature. There are additional  
Menu items which can be switched by using the /Buttons.  
Main Menu  
Auto Image Adjust  
Contrast/Brightness  
Input Select  
Audio Adjust  
Color Adjust  
Information  
Manual Image Adjust  
Setup Menu  
Memory Recall  
1 : Exit  
2 : Select  
Select the Menu item which contains the adjustment icon relating to the adjustment  
you want to make. Press the Select Button. Then, use the /Buttons to highlight  
the desired adjustment icon.  
Press the Select Button again. Use the /Buttons to make the appropriate  
adjustment or setting.  
For example, to correct for vertical position, select Menu item of Image Adjust and then press the  
Select Button. Then, select  
(H. / V.Position) by using the /Buttons.  
Manual Image Adjust  
Main Menu  
Auto Image Adjust  
Horizontal Size  
H./V. Position  
Fine Tune  
Contrast/Brightness  
Input Select  
Audio Adjust  
Sharpness  
Color Adjust  
Video Mode Adjustment  
OptiColor Mode  
Information  
Manual Image Adjust  
Setup Menu  
Memory Recall  
1
: Exit  
2
: Select  
1
: Exit  
2
: Select  
An adjustment page appears after you press the Select Button. Press the Select Button again.  
Then, use the /Buttons to change the vertical position settings. The vertical position of the  
overall display should be changing accordingly while you are doing this.  
NOTE  
When button operations are aborted during adjustment, On-Screen Display disappears when the  
time set for the OSD Time Out has passed. Also, press the Menu button to quickly turn off the On-  
Screen Display.  
Any changes are automatically saved in the memory when the On Screen Display disappears.  
Turning off the power should be avoided while using the Menu.  
ADJUSTING  
Adjustments for H. / V. Position, H.Size and Fine Tune are saved for each signal timing. Except for  
these adjustments, all other adjustments have only one setting which applies to all signal timings.  
OPERATING THE MONITOR  
9
ADJUSTMENT MENU CONTENTS  
Auto Image Adjust  
Adjustment Item  
Problem / Option  
Button to Press  
Auto Image Adjust *  
Only Analog input  
Adjust H. / V. Position, H.Size and Fine Tune  
automatically.  
The screen becomes dark for approximately five seconds during the adjustment.  
NOTE  
*
For best results, use the Auto Adjust in conjunction with the adjustment pattern. See page 14 for  
SCREEN ADJUSTMENTS.  
Contrast/Brightness  
Adjustment Item  
Contrast*3  
Problem / Option  
Too dull  
Button to Press  
Too intense  
Too dark  
Brightness *1,3  
Too bright  
On  
Off  
Increased contrast ratio  
typical contrast ratio  
ACR*2  
On  
Off  
Brightness of back light is reduced.  
Normal  
ECO  
*1 Adjust the Brightness when you are using the monitor in a dark room and feel the screen is too  
bright. Can not select when ACR is On.  
*2 ACR can not enable the same time when ECO is on.  
*3 Contrast and Brightness adjustment disabled when ECO is active or when Opticolor Mode is set  
to Text or Cinema or Game or Scenery.  
NOTE  
Contrast, Brightness,ACR and ECO are switched as follows by pressing the /Button  
successively.  
Contrast  
Brightness  
ACR  
ECO  
You can skip the Menu items and display an adjustment scale directly by using the following button  
operations.  
Contrast/Brightness/ ACR/ ECO :Press the Button when the Menu is not displayed.  
10  
OPERATING THE MONITOR  
Input Select*  
Input Select  
Adjustment Item  
Problem / Option  
Button to Press  
Analog  
Select the Analog input  
Select the HDMI input  
Select the DVI input  
Input Select  
HDMI  
DVI  
Analog,HDMI and DVI are switched as follows by pressing the Button successively.  
2
Analog  
HDMI  
DVI  
You can display the Input Select Menu by pressing the button under no signal input.  
1
*Not available for ProLite E2607WSV .  
Audio Adjust  
Adjustment Item  
Problem / Option  
Button to Press  
Too soft  
Too loud  
Volume  
Mute  
Return the sound volume to the previous level.  
Turn off the sound temporarily.  
Mute off and on are switched as follows by pressing the Select Button successively.  
NOTE  
Mute off  
Mute on  
Color Adjust  
Adjustment Item  
Problem / Option  
Button to Press  
Cool  
Bluish white (9300K)  
Reddish white (6500K)  
Greenish white (5400K)  
Red  
Normal  
Warm  
Too weak  
User Color  
2
Green  
Blue  
Too strong  
Information  
Information  
H. Frequency:  
Displays information regarding the current input signal coming  
from the graphic card in your computer.  
75.0 KHz  
V. Frequency:  
Resolution:  
60.0 Hz  
1920 x 1200  
154 MHz  
NOTE  
Pixel Clock:  
Serial Number:  
Model Number:  
0598781300001  
PLE2607WS  
See your graphic card user guide for more information about  
changing the resolution and refresh  
1 : Exit  
OPERATING THE MONITOR 11  
Manual Image Adjust  
Adjustment Item  
Problem / Option  
Button to Press  
Too narrow  
Too wide  
Horizontal Size  
Only Analog Input  
Too far to the left  
Too far to the right  
H. Position  
V. Position  
H./V. Position  
Only Analog Input  
Too low  
Too high  
To correct flickering text or lines  
Fine Tune  
Sharpness  
Only Analog Input  
Adjust the picture quality at resolutions of  
less 1920 x 1200.  
You can change the picture quality (4 steps).  
Full Screen  
Select full screen  
Over Screen  
Select over screen  
Select Aspect ratio  
Video Mode Adjustment  
Aspect Ratio 4:3*1  
Standard  
Office  
For general windows environment  
and monitor default setting  
For text editing and viewing in a  
word processing environment  
OptiColor Mode  
Movie  
For movie and video environment  
For PC game environment  
Game  
Picture  
For displaying outdoor scenery  
images  
H. Position and V. Position are switched as follows by pressing the/Button  
NOTE  
successively.  
H. Position  
V. Position  
*1 It can display in the center of the screen with a 4:3 or 5:4 aspect ratio when input video  
resolution is 4:3 or 5:4.  
Standard, Office,Movie, Game and Picture are switched as follows by pressing the /Button  
successively.  
Standard Office  
Movie  
Game  
Picture  
12  
OPERATING THE MONITOR  
Setup Menu  
Adjustment Item  
Problem / Option  
Button to Press  
Finnish  
English  
Français  
Deutsch  
Espanol  
Italiano  
English  
French  
German  
Spanish  
Italian  
Suomi  
Japanese  
Simplified Chinese  
Traditional Chinese  
日本語  
简体中文  
Language Select  
繁体中文  
OSD is too far to the left  
OSD is too far to the right  
H.Position  
V.Position  
OSD Position  
OSD Time Out  
OSD is too low  
OSD is too high  
You can set the OSD display duration time between 5  
and 60 seconds.  
Memory Recall  
Adjustment Item  
Memory Recall  
Problem / Option  
Button to Press  
Factory-preset data is restored.  
OPERATING THE MONITOR  
13  
SCREEN ADJUSTMENTS  
Adjust the image by following the procedure below to get the desired picture when selecting Analog input.  
The screen adjustments described in this manual are designed to set image position and minimize  
flicker or blur for the particular computer in use.  
The monitor is designed to provide the best performance at resolution of 1920 × 1200, but can not  
provide the best at resolutions of less than 1920 × 1200 becausethepictureisautomatically stretched  
to fit the full screen. It is recommended to operate at resolution of 1920 × 1200 in normal use.  
Displayed text or lines will be blurred or irregular in thickness when the picture is stretched due to  
the screen enlargement process.  
It is preferable to adjust the image position and frequency with the monitor controls, rather than the  
computer software or utilities.  
Perform adjustments after a warm-up period of at least thirty minutes.  
Additional adjustments may be required after the Auto Adjust depending on the resolution or signal  
timing.  
TheAutoAdjust may not work correctly when displaying the picture other than the screen adjustment  
pattern. In this case, manual adjustments are required.  
There are two ways to adjust the screen. One way is automatic adjustment for Position, H.Size and  
Fine Tune. The other way is performing each adjustment manually.  
Perform theAutoAdjust first when the monitor is connected to a new computer, or resolution is changed.  
If the screen has a flicker or blur, or the picture does not fit in the display area after performing the  
Auto Adjust, manual adjustments are required. Both adjustments should be made by using the screen  
adjustment pattern (Test.bmp) obtained via the IIYAMA web site (http://www.iiyama.com).  
Adjust the image by following the procedure below to get the desired picture.  
This manual explains adjustment under Windows 95/98/2000/Me/XP/Vista.  
Display the picture at the optimum resolution.  
Enter the Test.bmp (screen adjustment pattern) to wallpaper.  
Consult the appropriate documentation for doing this.  
NOTE  
Test.bmp is made at resolution of 1280 × 1024 Set the display position to center in the  
wallpaper setting dialogue box. If you use Microsoft® PLUS! 95/98 cancel the setting  
of “Stretch desktop wallpaper to fit the screen”.  
[Adjustment pattern]  
Color bar  
Zebra pattern  
Picture frame  
14  
OPERATING THE MONITOR  
Press the Auto Button. (Auto Adjust)  
Adjust the image manually by following procedure below when the screen has a flicker or  
blur, or the picture does not fit in the display area after performing the Auto Adjust.  
Adjust the V.Position so that the top and bottom of the picture frame will fit to the display  
area.  
1) Adjust the H.Position so that the left side of the picture frame will move to the left edge  
of the display area.  
2) Stretch the right side of the picture frame to the right edge of the display area by adjusting  
the H.Size.  
When the left side of the picture frame moves apart from the left edge of the display  
NOTE  
area during the H.Size adjustment, adjust steps 1) and 2).  
Another way to make the H.Size adjustment is to correct the vertical wavy lines in the  
zebra pattern.  
The picture may flicker during the H.Size, H.Position and V.Position adjustment.  
In case the picture frame is bigger or smaller than the data display area after the H.Size  
adjustment, repeat steps from .  
OPERATING THE MONITOR  
15  
1
Adjust the Fine Tune to correct horizontal wavy noise, flicker or blur in the zebra pattern.  
In case the strong flicker or blurs remain on a part of the screen, repeat steps and  
NOTE  
because the H.Size may not be adjusted correctly. If the flicker or blurs still remain,  
set the refresh rate of computer to low (60Hz) and repeat steps from again.  
Adjust the H.Position after the Fine Tune adjustment if the horizontal position moves  
during the adjustment.  
Adjust the Brightness and Color Adjust to get the desired picture after you complete the  
H.Size and Fine Tune adjustments.  
Put back your favorite wallpaper.  
16  
OPERATING THE MONITOR  
POWER MANAGEMENT FEATURE  
The power management feature of this product complies with power saving requirement of ENERGY  
STAR® and VESA DPMS. When activated, it automatically reduces unnecessary power consumption  
of the monitor when your computer is not in use.  
To use the feature, the monitor needs to be connected to a VESA DPMS compliant computer. There  
is a power management step the monitor takes as described below. The power management function,  
including any timer settings is configured by the operating system. Check your operating system manual  
for information on how this can be configured.  
Power Management Mode  
When the H-sync signal / V-sync signal / H and V sync signals from the computer are off, the monitor  
enters into Power Management Mode which reduces the power consumption to less than 2W. The  
screen becomes dark, and the power indicator turns to orange. From Power Management Mode, the  
image reappears in several seconds when either the keyboard or the mouse are touched again.  
Power Indicator  
Blue  
Orange  
0
2W  
100%  
Even when using the power management mode, the monitor consumes electricity. Turn  
off the Power Switch whenever the monitor is not in use, during the night and weekends,  
to avoid unnecessary power consumption.  
NOTE  
It is possible that the video signal from the computer may be on while the H or V sync  
signal is missing. In this instance, the POWER MANAGEMENT feature may not work  
properly.  
OPERATING THE MONITOR  
17  
TROUBLE SHOOTING  
If the monitor fails to operate correctly, please follow the steps below for a possible solution.  
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem  
you have. If the monitor does not get a picture, skip to 2.  
2. Consult the following items if you cannot find an appropriate adjustment item in OPERATING THE  
MONITOR or if the problem persists.  
3.  
If you are experiencing a problem which is not described below or you cannot correct the  
problem, discontinue using the monitor and contact your dealer or iiyama service center for further  
assistance.  
Problem  
Check  
The picture does  
not appear.  
(Power indicator  
does not light up.)  
The Power Cable is firmly seated in the socket.  
The Power Switch is turned ON.  
The AC socket is live. Please check with another piece of equipment.  
(Power indicator  
is blue.)  
If the blank screen saver is in active mode, touch the keyboard or the  
mouse.  
Increase the Contrast and/or Brightness.  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
(Power indicator  
is orange.)  
If the monitor is in power management mode, touch the keyboard or the  
mouse.  
The computer is ON.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
The screen is not  
synchronized.  
The Signal Cable is properly connected.  
The signal timing of the computer is within the specification of the monitor.  
The video output level of the computer is within the specification of the  
monitor.  
The screen  
position is not in  
the center.  
The signal timing of the computer is within the specification of the monitor.  
The screen is  
too bright or too  
dark.  
The video output level of the computer is within the specification of the  
monitor.  
The screen is  
The power voltage is within the specification of the monitor.  
The signal timing of the computer is within the specification of the monitor.  
shaking.  
18  
TROUBLE SHOOTING  
Problem  
No sound.  
Check  
The audio equipment (computer etc.) is ON.  
The Audio Cable is properly connected.  
The Volume is turned up.  
The Mute is OFF.  
The audio output level of the audio equipment is within the specification  
of the monitor.  
The sound is too  
loud or too quiet.  
The audio output level of the audio equipment is within the specification of  
the monitor.  
A strange noise is  
heard.  
The Audio Cable is properly connected.  
RECYCLING INFORMATION  
For better environment protection please don’t dispose your monitor.  
TROUBLESHOOTING  
19  
APPENDIX  
SPECIFICATIONS:ProLite E2607WS  
Size  
Pixel pitch  
Diagonal: 65cm / 26"  
0.2865 mm H × 0.2865mm V  
LCD Panel  
Brightness  
300cd/m2 (Typical)  
Contrast ratio  
1000 : 1 (Typical), ACR function available  
Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 70 degrees (Typical)  
Response time  
2ms (Gray to Gray)  
Display Colors  
Approx.16.7M  
Sync Frequency  
Maximum Resolution  
Input Connector  
Plug � Play  
Horizontal: 31.0-80.0kHz, Vertical: 56-75Hz  
1920 × 1200  
D-Sub mini 15 pin,DVI-24 pin,HDMI  
VESA DDC1/2BTM  
Input Sync Signal  
Input Video Signal  
Separate sync: TTL, Positive or Negative  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital (DVI): Digital Visual Interface standard Rev. 1.0 compliance  
Digital (HDMI): HDMI (1.2)  
Input Audio Connector  
Input Audio Signal  
Speakers  
ø 3.5mm mini jack (Stereo)  
1Vrms maximum  
5W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
550.1mm W × 343.8mm H / 21.66" W × 13.54" H  
100-240VAC, 50/60Hz, 2.0A  
Power Consumption  
Dimensions / Net Weight  
52W (Typ), Power management mode: 2W maximum*  
597.5 × 460.5 × 238.0 mm / 23.5 ×18.1 × 9.4 (W×H×D),  
8.3kg / 18.3lbs  
Tilt Angle  
20 degrees (Up: 0-20 degrees)  
Operating: Temperature  
Humidity  
5 to 35°C / 41 to 95°F  
10 to 80% (No condensation)  
Environmental  
Considerations  
Storage: Temperature -20 to 60°C / -4 to 140°F  
Humidity  
10 to 70% (No condensation)  
CE,TUV/Baurt,Energy star,PSE  
Approvals  
* Condition: Audio equipment is not connected.  
20  
APPENDIX  
APPENDIX  
SPECIFICATIONS:ProLite E2607WSD  
Size  
Pixel pitch  
Diagonal: 65cm / 26"  
0.2865 mm H × 0.2865mm V  
LCD Panel  
Brightness  
300cd/m2 (Typical)  
Contrast ratio  
1000 : 1 (Typical), ACR function available  
Viewable angle Right / Left : 85 degrees each, Up:80 degrees, Down: 70 degrees (Typical)  
Response time  
2ms (Gray to Gray)  
Display Colors  
Approx.16.7M  
Sync Frequency  
Maximum Resolution  
Input Connector  
Plug � Play  
Horizontal: 31.0-80.0kHz, Vertical: 56-75Hz  
1920 × 1200  
D-Sub mini 15 pin,DVI-24 pin  
VESA DDC1/2BTM  
Input Sync Signal  
Input Video Signal  
Separate sync: TTL, Positive or Negative  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
Digital (DVI): Digital Visual Interface standard Rev. 1.0 compliance  
Input Audio Connector  
Input Audio Signal  
Speakers  
ø 3.5mm mini jack (Stereo)  
1Vrms maximum  
5W × 2 (Stereo speakers)  
Maximum Screen Size  
Power Source  
550.1mm W × 343.8mm H / 21.66" W × 13.54" H  
100-240VAC, 50/60Hz, 2.0A  
Power Consumption  
Dimensions / Net Weight  
52W (Typ), Power management mode: 2W maximum*  
597.5 × 460.5 × 238.0 mm / 23.5 ×18.1 × 9.4 (W×H×D),  
8.3kg / 18.3lbs  
Tilt Angle  
20 degrees (Up: 0-20 degrees)  
Operating: Temperature  
Humidity  
5 to 35°C / 41 to 95°F  
10 to 80% (No condensation)  
Environmental  
Considerations  
Storage: Temperature -20 to 60°C / -4 to 140°F  
Humidity  
10 to 70% (No condensation)  
Approvals  
CE,TUV/Baurt,Energy star  
* Condition: Audio equipment is not connected.  
APPENDIX  
21  
APPENDIX  
SPECIFICATIONS:ProLite E2607WSV  
Size  
Diagonal: 65cm / 26"  
LCD Panel  
Pixel pitch  
Brightness  
Contrast ratio  
Viewable angle  
0.2865 mm H × 0.2865mm V  
300cd/m2 (Typical)  
1000 : 1 (Typical), ACR function available  
Right / Left : 85 degrees each, Up:80 degrees, Down: 70 degrees (Typical)  
Response time 2ms (Gray to Gray)  
Display Colors  
Approx.16.7M  
Sync Frequency  
Maximum Resolution  
Input Connector  
Plug � Play  
Horizontal: 31.0-80.0kHz, Vertical: 56-75Hz  
1920 × 1200  
D-Sub mini 15 pin,  
VESA DDC1/2BTM  
Input Sync Signal  
Input Video Signal  
Input Audio Connector  
Separate sync: TTL, Positive or Negative  
Analog: 0.7Vp-p (Standard), 75Ω, Positive  
ø 3.5mm mini jack (Stereo)  
Input Audio Signal  
Speakers  
1Vrms maximum  
5W × 2 (Stereo speakers)  
Maximum Screen Size  
550.1mm W × 343.8mm H / 21.66" W × 13.54" H  
Power Source  
100-240VAC, 50/60Hz, 2.0A  
Power Consumption  
Dimensions / Net Weight  
52W (Typ), Power management mode: 2W maximum*  
597.5 × 460.5 × 238.0 mm / 23.5 ×18.1 × 9.4 (W×H×D),  
8.3kg / 18.3lbs  
Tilt Angle  
20 degrees (Up: 0-20 degrees)  
Operating: Temperature  
Humidity  
5 to 35°C / 41 to 95°F  
10 to 80% (No condensation)  
Environmental  
Considerations  
Storage: Temperature -20 to 60°C / -4 to 140°F  
10 to 70% (No condensation)  
CE,TUV/Baurt,Energy star,VCCI-B  
Humidity  
Approvals  
NOTE * Condition: Audio equipment is not connected.  
22  
APPENDIX  
DIMENSIONS  
DIMENSIONS  
PC Input  
COMPLIANT TIMING  
Vertical  
Frequency  
Video Mode  
Horizontal  
Frequency  
Dot Clock  
59.940Hz  
75.000Hz  
60.317Hz  
72.188Hz  
75.000Hz  
60.004Hz  
70.069Hz  
75.029Hz  
60.020Hz  
75.025Hz  
59.887Hz  
74.984Hz  
60.000Hz  
60.000Hz  
59.950Hz  
70.087Hz  
31.469kHz  
37.500kHz  
37.879kHz  
48.077kHz  
46.875kHz  
48.363kHz  
56.476kHz  
60.023kHz  
63.981kHz  
79.976kHz  
55.935kHz  
70.635kHz  
75.000kHz  
65.290kHz  
74.038kHz  
31.469kHz  
25.175MHz  
31.500MHz  
40.000MHz  
50.000MHz  
49.500MHz  
65.000MHz  
75.000MHz  
78.750MHz  
108.000MHz  
135.000MHz  
106.500MHz  
136.750MHz  
162.000MHz  
146.250MHz  
154.000MHz  
28.322MHz*  
640 × 480  
VGA  
SVGA 800 × 600  
VESA  
XGA  
1024 × 768  
SXGA 1280 × 1024  
1440 ×900  
WXGA+  
1600 ×1200  
1680 ×1050  
1920 ×1200  
720 × 400  
UXGA  
WSXGA+  
WUXGA  
VGA TEXT  
NOTE  
* DVI, HDMI Input is not compliant.  
Video input 480P/720P/1080i/1080P  
APPENDIX  
23  

Intel STRONGARM SA 1100 User Manual
Intel Tray Core I7 4770t CM8064601465902 User Manual
JVC AV 2105WE User Manual
JVC DT V24L3D User Manual
Kenwood Computer Monitor DDX6033 User Manual
Lenovo 3000 V100 User Manual
Nortel Networks Norstar M7324 User Manual
Panasonic Cordless Telephone KX TG2522E User Manual
Philips 28PT4404 User Manual
Philips Computer Monitor 220V3 User Manual