IBM 9483 User Manual

Inside cover  
These user’s setup instructions cover typical user environments. The on-screen  
messages may differ depending on the level of your hardware and software. In some  
cases you may need to vary the setup procedures.  
For more information, refer to your computer or operating system manuals or consult  
your system administrator or dealer.  
Ces instructions de configuration d’exploitation s’appliquent aux environnements  
d’utilisation types. Les messages affichés à l’écran peuvent varier en fonction du niveau  
de votre matériel et de vos logiciels informatiques. Dans certains cas, vous pouvez être  
amenés à changer de procédures de configuration.  
Pour de plus amples informations à ce sujet, veuillez vous reporter aux manuels de  
votre ordinateur et de votre système d’exploitation, ou consultez l’administrateur de  
votre système ou votre revendeur.  
Diese Einstellungsanweisungen durch den Benutzer gelten für typische  
Betriebsumgebungen. Die Bildschirmmeldungen können je nach Art der verwendeten  
Hardware und Software auch anders lauten. In einigen Fällen müssen die  
Einstellungsschritte unter Umständen abgeändert werden.  
Weitere Informationen finden Sie im Computer- oder Betriebssystemhandbuch, oder  
wenden Sie sich an Ihren Systemadministrator oder Fachhändler.  
En estas instrucciones de configuración se describen entornos de usuarios típicos. Los  
mensajes en pantalla, pueden diferir según sea el nivel del hardware y del software. En  
algunos casos, necesitará seguir otros procedimientos para la configuración.  
Para obtener más información, puede consultar los manuales del ordenador o del  
sistema operativo o ponerse en contacto con el administrador del sistema o con el  
distribuidor.  
Queste istruzioni di configurazione per l’utente coprono gli ambienti operativi comuni. I  
messaggi che appaiono sul video possono differire a seconda dell’hardware e del  
software utilizzati. In alcuni casi potrebbe essere necessario variare le procedure di  
configurazione.  
Per ulteriori informazioni, fare riferimento ai manuali del computer o del sistema  
operativo, o consultare il proprio amministratore di sistema o il concessionario.  
Manipulation :  
• Manipuler ce produit avec précaution pour le déplacer.  
• Le panneau ne doit pas être utilisé en position horizontale.  
• La lampe fluorescente de l’écran à cristaux liquides contient une faible quantité de mercure  
(moins de 50 milligrammes). Pour protéger l’environnement, ce produit ne doit pas être jeté  
dans une décharge. Il doit être éliminé conformément aux réglementations locales.  
• L’écran à cristaux liquides est en verre. Il peut donc se briser en cas de chute ou de  
mauvaise manipulation. Si l’écran est brisé, une faible quantité de cristaux liquides risque  
de se répandre. Eviter tout contact avec cette matière irritante. Si des cristaux liquides  
rentrent en contact avec les yeux, les mains, etc., il faut alors laver cette zone avec de l’eau  
pendant au moins 15 minutes. Si des symptômes apparaissent après le lavage des zones  
concernées, contacter un médecin.  
GEFAHRENHINWEISE  
Um der Gefahr eines elektrischen Schlags vorzubeugen:  
• Das Gerät wird mit einem geerdeten Stecker und Netzkabel geliefert, das zum Anschluß an  
die Wechselstromversorgung verwendet werden sollte.  
• Das Netzkabel darf nur an eine ordnungsgemäß verkabelte und geerdete Steckdose  
angeschlossen werden.  
• Alle Geräte, an die dieses Produkt angeschlossen ist, müssen ebenfalls an eine  
ordnungsgEmäß verkabelte und geerdete Steckdose angeschlossen sein.  
• Die Gehäusedeckel dürfen nicht entfernt werden.  
• Das Gerät besitzt keinen Hauptschalter. Um die Stromversorgung zum Monitor zu  
unterbrechen, müssen Sie den Stecker aus der Steckdose ziehen. Die Steckdose sollte  
leicht zugänglich sein.  
• Das Gerät darf während eines Gewitters nicht ein- oder ausgeschaltet werden.  
• Verwenden Sie nur das im Lieferumfang des Monitors enthaltene Netzteil.  
Handhabung:  
• Seien Sie vorsichtig, wenn Sie das Gerät bewegen.  
• Das Bedienfeld darf nicht bedient werden, wenn der Monitor auf der Seite liegt.  
• Die in der LCD-Baugruppe verwendete Leuchtstofflampe enthält eine geringe Menge  
Quecksilber (unter 50 mg). Aus Umweltschutzgründen darf dieses Gerät nicht auf eine  
Mülldeponie gebracht werden, sondern muß gemäß den örtlichen Vorschriften und  
Verordnungen entsorgt werden.  
• Die LCD-Baugruppe besteht aus Glas, das bei unsanfter Handhabung oder Fallenlassen  
des Geräts zerbrechen kann. In diesem Fall tritt unter Umständen eine geringe Menge  
flüssiges Quecksilber aus. Vermeiden Sie den Kontakt mit dieser Substanz, da es sich um  
einen Reizstoff handelt. Sollten Ihre Augen, Hände usw. damit in Berührung kommen,  
waschen Sie den betroffenen Bereich mindestens 15 Minuten mit Wasser aus. Wenn nach  
dem Auswaschen noch Beschwerden festzustellen sind, sollte ein Arzt zu Rate gezogen  
werden.  
ii  
GEVAAR  
Voor het vermijden van elektrische schokken:  
• Dit product wordt geleverd met een voedingskabel voorzien van een geaarde stekker. Voor  
aansluiting op het lichtnet dient deze voedingskabel gebruikt te worden.  
• De voedingskabel dient alleen gebruikt te worden in een stopcontact dat correct bedraad  
en geaard is.  
• Alle apparatuur waar dit product op aangesloten is dient eveneens op een correct bedraad  
en geaard stopcontact aangesloten te zijn.  
• Demonteer niet de dekplaten.  
• Dit product is niet voorzien van een netschakelaar. Scheid de monitor van de netspanning  
door de stekker uit het stopcontact te nemen. Het stopcontact dient goed toegankelijk te zijn.  
• Dit product niet tijdens onweer aansluiten of loskoppelen.  
• Gebruik altijd de wisselspanningsadapter die bij de monitor meegeleverd is.  
Hoe met het product omgegaan moet worden:  
• Ga bij verplaatsingen voorzichtig met dit product om.  
• Het bedieningspaneel mag niet in horizontale stand bediend worden.  
• De fluorescerende lamp in het LCD-samenstel bevat een kleine hoeveelheid kwik (minder  
dan 50 mg). In verband met milieueisen mag dit product niet als normaal afval gestort  
worden. Men dient het te verwijderen volgens ter plaatse geldende regels en  
verordeningen.  
Doordat het LCD-samenstel van glas gemaakt is kan het bij ruwe behandeling of als men  
het laat vallen, breken. In sommige omstandigheden kan dit tot gevolg hebben dat het  
vloeibare-kristalmateriaal vrijkomt. Vermijd contact met dit materiaal aangezien het irritaties  
kan veroorzaken. Als het materiaal in contact komt met ogen, handen, enz., dan moeten  
deze gedurende minstens 15 minuten met water gespoeld worden; als er na het spoelen  
nog steeds symptomen aanwezig zijn dient er medische hulp ingeroepen te worden.  
PELIGRO  
Para evitar el riesgo de descargas eléctricas:  
• El producto se suministra con un enchufe con conexión a tierra y con un cable de  
alimentación para conectar al suministro de corriente alterna.  
• Conecte el cable de alimentación sólo a un tomacorrientes con el cableado y conexión a  
tierra correctos.  
• Este producto deberá conectarse a un equipo que esté también conectado a un  
tomacorrientes con el cableado y conexión a tierra correctos.  
• No retire las cubiertas.  
• En este producto no se incorpora un interruptor para alimentación de corriente alterna.  
Para aislar el monitor del suministro de energía eléctrica, desconéctelo del tomacorrientes.  
Asegúrese de utilizar una toma eléctrica de fácil acceso.  
• No conecte o desconecte este producto durante una tormenta eléctrica.  
• Utilice siempre el adaptador de corriente alterna que se suministra con el monitor.  
iii  
Manipulación:  
• Al mover el producto, hágalo con cuidado.  
• El panel no debe ponerse en funcionamiento si se encuentra en posición horizontal.  
• La lámpara fluorescente que se utiliza en la pantalla de cristal líquido (LCD) contiene una  
pequeña cantidad de mercurio (menos de 50 miligramos). No lo tire junto a basuras que se  
depositan en vertederos; hacerlo, podría resultar nocivo para el medio ambiente. Tenga en  
cuenta la normativa local en cuanto a eliminación de desechos.  
• La pantalla de cristal líquido (LCD) es de cristal y puede romperse como resultado de un  
trato brusco o de una caída. Podría suceder que una pequeña cantidad del material de  
cristal líquido quedase al descubierto. Este material es irritante; evite tocarlo. Asegúrese de  
evitar el contacto de sus ojos, manos, etc., con el líquido. Si el líquido toca alguna de estas  
partes, lave el área afectada con agua corriente durante 15 minutos como mínimo y, luego,  
consulte a un médico.  
PERICOLO  
Per evitare rischi di scosse elettriche:  
• Il prodotto è dotato di una spina e di un cavo di alimentazione con messa a terra che  
dovranno essere utilizzati per il collegamento all’alimentazione CA.  
• Il cavo di alimentazione dovrà essere utilizzato esclusivamente con una presa elettrica  
adeguatamente cablata e con messa a terra.  
• Si dovrà utilizzare una presa adeguatamente cablata e con messa a terra anche per  
eventuali apparecchiature alle quali il prodotto sia collegato.  
• Non smontare le coperture.  
• L’apparecchiatura non incorpora un interruttore dell’alimentazione CA. Per isolare il monitor  
dall’alimentazione elettrica è necessario staccare la spina dalla presa elettrica. La presa  
elettrica dovrà essere facilmente accessibile.  
• Non collegare o scollegare il prodotto durante una tempesta elettrica.  
• Utilizzare sempre l’adattatore CA fornito con il monitor.  
Note di impiego:  
• Maneggiare con cura il prodotto per spostarlo.  
• Il monitor non deve essere utilizzato in posizione orizzontale.  
• La lampada fluorescente installata nel display a cristalli liquidi (LCD) contiene una piccola  
quantità di mercurio (meno di 50 milligrammi). Pertanto, per ragioni dettate dalla tutela  
dell’ambiente, non utilizzare le normali discariche per lo smaltimento del prodotto ma  
attenersi ai regolamenti e alle ordinanze locali.  
• Il display a cristalli liquidi è di vetro e, se lasciato cadere o non maneggiato con cautela, può  
rompersi. Ciò potrebbe causare in certe condizioni la fuoriuscita di una piccola quantità  
della sostanza che compone i cristalli liquidi. Evitare il contatto con tale sostanza perché è  
irritante. Se la sostanza dovesse venire a contatto con occhi, mani, ecc., risciacquare la  
parte interessata con acqua per almeno 15 minuti. Se, dopo aver risciacquato la parte, si  
avvertono eventuali sintomi, consultare un medico.  
iv  
PERIGO  
Para evitar o perigo de choques eléctricos:  
• O produto é fornecido com uma ficha com massa e um cabo eléctrico que deverá ser  
utilizado para ligar à alimentação CA.  
• O cabo eléctrico deve ser apenas utilizado com uma tomada devidamente electrificada e  
ligada à massa.  
• Qualquer equipamento a que este produto se encontre ligado também tem que estar  
ligado a uma tomada devidamente electrificada e ligada à massa.  
• Não tire as coberturas.  
• O produto não possui um interruptor CA. Para isolar o monitor da alimentação eléctrica,  
tem que tirar a ficha da tomada. A tomada deverá estar num local de acesso fácil.  
• Não ligue nem desligue este produto durante uma trovoada.  
• Utilize sempre o adaptador CA fornecido com o monitor.  
Manuseamento:  
• Manuseie este produto com cuidado quando o deslocar.  
• O painel não deverá ser utilizado numa posição horizontal.  
• A luz fluorescente utilizada no conjunto do visor de cristais líquidos (LCD) contém uma  
pequena quantidade de mercúrio (menos de 50 miligramas). Por razões de ordem  
ambiental este produto não pode ser eliminado num aterro sanitário. Terá que ser  
eliminado de acordo com as disposições e regulamentos locais.  
• O conjunto do visor de cristais líquidos (LCD) é feito de vidro e pode partir-se se for tratado  
com falta de cuidado ou se cair. Estas situações, em certas circunstâncias, podem levar à  
exposição de uma pequena quantidade de cristais líquidos. Evite o contacto com este  
material porque se trata de um produto irritante. Se este material entrar em contacto com  
os olhos, mãos, etc., a área deverá ser lavada com água durante pelo menos 15 minutos;  
se, após, a lavagem detectar algum sintoma deverá consultar um médico.  
FARE  
Sådan undgås risiko for elektrisk stød:  
• Dette produkt leveres med et jordstik og en netledning, som skal bruges ved tilslutning til  
strømnettet.  
• Netledningen må kun bruges i en korrekt jordet og tilsluttet stikkontakt.  
• Alt udstyr, som dette produkt tilsluttes til, skal også være tilsluttet en korrekt jordforbundet  
og tilsluttet stikkontakt.  
• Dækslerne må ikke fjernes.  
• Produktet har ingen strømafbryder. Hvis skærmen skal isoleres fra den elektriske  
strømkilde, skal stikket tages ud af stikkontakten. Stikkontakten skal være umiddelbart  
inden for rækkevidde.  
• Tilslut og frakobl ikke dette produkt i tordenvejr.  
• Benyt altid den vekselstrømsadapter, der fulgte med skærmen.  
v
Håndtering:  
• Behandl produktet forsigtigt, når det flyttes.  
• Panelet må ikke betjenes i vandret stilling.  
• Den fluorescerede pære i LCD-skærmen indeholder et mindre kvantum kviksølv (under 50  
mg). Af hensyn til miljøet bør dette produkt ikke bortskaffes på en losseplads. Det skal  
bortskaffes i henhold til lokale love og regulativer.  
• LCD-skærmen består af glas, der kan gå itu, hvis den behandles uforsigtigt eller tabes.  
Dette kan i visse tilfælde medføre udslip af en mindre mængde flydende krystaller. Undgå  
kontakt med dette materiale, da det kan give anledning til irritation. Hvis dette materiale  
kommer i kontakt med øjne, hænder osv. bør området skylles med vand i mindst 15  
minutter. Kontakt lægen i tilfælde af symptomer efter skylningen.  
ADVARSEL  
Slik unngår du risiko for elektrisk støt:  
• Produktet er utstyrt med et jordet støpsel og en jordet strømledning som skal brukes til å  
koble det til strømtilførselen.  
• Strømledningen bør bare brukes i en riktig montert og jordet stikkontakt.  
• Alt utstyr som dette produktet kobles sammen med, må også kobles til en riktig montert og  
jordet kontakt.  
• Ta ikke av dekselet.  
• Produktet har ingen strømbryter. Når du vil bryte strømtilførselen, må du ta ut støpselet fra  
kontakten. Kontakten bør være lett tilgjengelig.  
• Koble ikke til eller fra produktet i tordenvær.  
• Bruk alltid vekselstrømsadapteren som følger med skjermen.  
Håndtering:  
• Vær forsiktig når du flytter produktet.  
• Panelet bør ikke brukes i vannrett stilling.  
• Lysstoffrøret som er brukt i LCD-enheten, inneholder en liten mengde kvikksølv (mindre  
enn 50 gram). Av miljøhensyn må dette produktet ikke kastes i naturen, men må behandles  
som spesialavfall i henhold til lokale lover og regler.  
• LCD-enheten består av glass som kan knuses hvis den behandles uforsiktig eller faller i  
bakken. I noen tilfeller kan dette føre til at litt av LCD-væsken renner ut. Unngå å komme i  
kontakt med materialet, da det kan forårsake irritasjoner. Hvis materialet kommer i kontakt  
med øynene, hendene e.l., bør det utsatte området skylles med vann i minst 15 minutter.  
Oppsøk lege hvis det fortsatt vises symptomer på irritasjon etter vask.  
VARNING  
Så här undviker du risk för elektriska stötar:  
• Produkten är försedd med en jordad stickpropp och sladd för anslutning till eluttag.  
• Nätsladden ska bara anslutas till ett korrekt installerat jordat eluttag.  
vi  
• All utrustning som sammankopplas med denna produkt måste också anslutas till ett korrekt  
installerat jordat eluttag.  
• Ta inte bort kåporna.  
• Produkten är inte försedd med nätströmbrytare. Om du vill koppla bort skärmen från elnätet  
måste du dra ut stickproppen ur eluttaget. Eluttaget ska vara lättåtkomligt.  
• Undvika att ansluta eller koppla bort produkten under åskväder.  
• Använd alltid nätadaptern som följde med skärmen.  
Hantering:  
• Hantera produkten varsamt när du flyttar den.  
• Panelen får inte användas i horisontellt läge.  
• Lampan som används i LCD-enheten innehåller en liten mängd kvicksilver (mindre än 50  
milligram). Av miljöskäl får den inte kasseras som vanligt avfall, utan måste kasseras enligt  
lokala förordningar och regler.  
• LCD-enheten är tillverkad av glas och kan gå sönder om den utsätts för ovarsam hantering  
eller tappas i golvet. Detta kan under vissa omständigheter leda till att en liten mängd av  
flytande kristall (LCD)-materialet frigörs. Undvik kontakt med detta material eftersom det  
kan orsaka irritation. Om materialet skulle komma i kontakt med ögon, händer m m ska  
området spolas med vatten i minst 15 minuter; uppsök läkare om du har symptom efter  
spolningen.  
VAROITUS  
Sähköiskuvaaran välttäminen:  
• Tuotteen mukana toimitetaan maadoitettu pistoke ja liitäntäjohto, joita pitäisi käyttää  
vaihtovirtasyöttöön kytkettäessä.  
• Liitäntäjohdon saa kytkeä vain asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.  
• Kaikki laitteet, joihin tämä tuote liitetään, on myös kytkettävä asianmukaisesti johdotettuun  
ja maadoitettuun pistorasiaan.  
• Älä poista suojakansia.  
• Laitteessa ei ole vaihtovirtakatkaisijaa. Pistoke on poistettava pistorasiasta monitorin  
sähkövirran syötön katkaisemiseksi. Pistorasian pitäisi olla helposti käsiksi päästävässä  
paikassa.  
• Älä kytke tuotetta päälle tai päältä ukonilmalla.  
• Käytä aina monitorin mukana toimitettua vaihtovirta-adapteria.  
Käsittely:  
• Käsittele tuotetta varovasti siirtäessäsi sitä.  
• Paneelia ei saa käyttää vaakasuorassa asennossa.  
• Nestekidenäytössä käytetty loistelamppu sisältää pienen määrän elohopeaa (alle 50  
milligrammaa). Ympäristönsuojelusyistä tätä tuotetta ei saa toimittaa kaatopaikalle, vaan se  
on hävitettävä paikallisten säännösten ja määräysten mukaisesti.  
vii  
• Nestekidenäyttö on tehty lasista, ja se voi rikkoutua kovakouraisesti käsiteltäessä tai  
pudotettaessa. Joissakin olosuhteissa tällöin voi päästä vapaaksi pieniä määriä  
nestekideainetta. Vältä koskettamasta tätä ainetta, sillä se aiheuttaa ärsytystä. Jos  
aine pääsee kosketuksiin silmien, käsien ym. kanssa, aluetta pitää huuhdella vedellä  
vähintään 15 minuutin ajan; jos huuhtelun jälkeen havaitaan ärsytysoireita, on  
käännyttävä lääkärin puoleen.  
KIN¢Y¡√™  
°È· ÙËÓ ·ÔÊ˘Á‹ ÎÈÓ‰‡ÓÔ˘ ËÏÂÎÙÚÔÏËÍ›·˜:  
TÔ ÚÔ˚fiÓ ·˘Ùfi Â›Ó·È ÂÊԉȷṲ̂ÓÔ Ì ¤Ó· ÁÂȈ̤ÓÔ ÊȘ Î·È ËÏÂÎÙÚÈÎfi ηÏÒ‰ÈÔ Ù·  
ÔÔ›· Ú¤ÂÈ Ó· ¯ÚËÛÈÌÔÔÈÔ‡ÓÙ·È ÁÈ· ÙË Û‡Ó‰ÂÛË ÛÙËÓ ·ÚÔ¯‹ ÂÓ·ÏÏ·ÛÛfiÌÂÓÔ˘  
Ú‡̷ÙÔ˜ (AC).  
TÔ ËÏÂÎÙÚÈÎfi ηÏÒ‰ÈÔ ı· Ú¤ÂÈ Ó· Û˘Ó‰¤ÂÙ·È ÌfiÓÔ Û Ú›˙˜ Ì ηٿÏÏËÏË  
ηψ‰›ˆÛË Î·È Á›ˆÛË.  
√È Û˘Û΢¤˜ ÛÙȘ Ôԛ˜ ı· Û˘Ó‰Âı› ·˘Ùfi ÙÔ ÚÔ˚fiÓ Ú¤ÂÈ Â›Û˘ Ó· Û˘Ó‰¤ÔÓÙ·È  
Û Ú›˙· Ì ηٿÏÏËÏË Î·Ïˆ‰›ˆÛË Î·È Á›ˆÛË.  
ªËÓ ·Ê·ÈÚ›Ù ٷ ηχÌÌ·Ù·.  
TÔ ÚÔ˚fiÓ ‰ÂÓ ÂÚÈÏ·Ì‚¿ÓÂÈ ÂÓۈ̷و̤ÓÔ ‰È·ÎfiÙË ÂÓ·ÏÏ·ÛÛfiÌÂÓÔ˘ Ú‡̷ÙÔ˜  
(AC). °È· Ó· ·ÔÌÔÓÒÛÂÙ ÙËÓ ÔıfiÓË ·fi ÙËÓ ·ÚÔ¯‹ Ú‡̷ÙÔ˜, Ú¤ÂÈ Ó·  
·Ê·ÈÚ¤ÛÂÙ ÙÔ ÊȘ ·fi ÙËÓ Ú›˙·. ∏ Ú›˙· Ú¤ÂÈ Ó· ‚Ú›ÛÎÂÙ·È Û ÛËÌÂ›Ô Â‡ÎÔÏ·  
ÚÔÛÂÏ¿ÛÈÌÔ.  
ªË Û˘Ó‰¤ÂÙ ‹ ·ÔÛ˘Ó‰¤ÂÙ ÙÔ ÚÔ˚fiÓ Î·Ù¿ ÙË ‰È¿ÚÎÂÈ· ËÏÂÎÙÚÔı‡ÂÏÏ·˜.  
N· ¯ÚËÛÈÌÔÔț٠¿ÓÙÔÙ ÙÔÓ ÚÔÛ·ÚÌÔÁ¤· AC Ô˘ ˘¿Ú¯ÂÈ ÛÙË Û˘Û΢·Û›· Ù˘  
ÔıfiÓ˘.  
ÃÂÈÚÈÛÌfi˜:  
√ ¯ÂÈÚÈÛÌfi˜ ÙÔ˘ ÚÔ˚fiÓÙÔ˜ ηٿ ÙË ÌÂÙ·ÊÔÚ¿ ÙÔ˘ Ú¤ÂÈ Ó· Á›ÓÂÙ·È Ì ÚÔÛÔ¯‹.  
∏ ÔıfiÓË ‰ÂÓ Ú¤ÂÈ Ó· ÏÂÈÙÔ˘ÚÁ› Û ÔÚÈ˙fiÓÙÈ· ı¤ÛË.  
√ Ï·ÌÙ‹Ú·˜ ÊıÔÚÈÛÌÔ‡ ÛÙËÓ ÔıfiÓË ˘ÁÚÒÓ ÎÚ˘ÛÙ¿ÏÏˆÓ (LCD) ÂÚȤ¯ÂÈ ÌÈÎÚ‹  
ÔÛfiÙËÙ· ˘‰Ú·ÚÁ‡ÚÔ˘ (ÏÈÁfiÙÂÚÔ ·fi 50 mg). °È· ÏfiÁÔ˘˜ ÚÔÛÙ·Û›·˜  
ÂÚÈ‚¿ÏÏÔÓÙÔ˜, ÙÔ ÚÔ˚fiÓ ·˘Ùfi ‰ÂÓ Ú¤ÂÈ Ó· ·ÔÚÚ›ÙÂÙ·È Û ¯ˆÌ·ÙÂÚ¤˜. ∫·Ù¿  
ÙËÓ ·fiÚÚȯ‹ ÙÔ˘ Ú¤ÂÈ Ó· ·ÎÔÏÔ˘ıÔ‡ÓÙ·È ÔÈ Î·Ù¿ ÙfiÔ˘˜ ÈÛ¯‡Ô˘Û˜ Û¯ÂÙÈΤ˜  
‰È·Ù¿ÍÂȘ ‹ ηÓÔÓÈÛÌÔ›.  
∏ ‰È¿Ù·ÍË Ù˘ ÔıfiÓ˘ ˘ÁÚÒÓ ÎÚ˘ÛÙ¿ÏÏˆÓ ·ÔÙÂÏÂ›Ù·È ·fi Á˘·Ï› Î·È ÌÔÚ› Ó·  
Û¿ÛÂÈ Û ÂÚ›ÙˆÛË ‚›·ÈÔ˘ ¯ÂÈÚÈÛÌÔ‡ ‹ ÙÒÛ˘. ™Â ÌÂÚÈΤ˜ ÂÚÈÙÒÛÂȘ, ·˘Ùfi  
ÌÔÚ› Ó· ¤¯ÂÈ ˆ˜ ·ÔÙ¤ÏÂÛÌ· ÙËÓ ¤ÎıÂÛË ÌÈÎÚ‹˜ ÔÛfiÙËÙ·˜ ÙˆÓ ˘ÁÚÒÓ  
ÎÚ˘ÛÙ¿ÏÏ˘Ó. ∞ÔʇÁÂÙ ÙËÓ Â·Ê‹ Ì ÙÔ ˘ÏÈÎfi ·˘Ùfi ÁÈ·Ù› ÚfiÎÂÈÙ·È ÁÈ· ÂÚÂıÈÛÙÈ΋  
Ô˘Û›·. ∂¿Ó ÙÔ ˘ÏÈÎfi ¤ÚıÂÈ Û Â·Ê‹ Ì ٷ Ì¿ÙÈ·, Ù· ¯¤ÚÈ· ÎÏ, ÍÂχÓÂÙ ÙËÓ  
ÂÚÈÔ¯‹ Ì ÓÂÚfi ÁÈ· ÙÔ˘Ï¿¯ÈÛÙÔÓ 15 ÏÂÙ¿ Î·È Û˘Ì‚Ô˘Ï¢Ù›Ù ¤Ó· ÁÈ·ÙÚfi ·Ó  
οÔÈ· Û˘ÌÙÒÌ·Ù· ÂÈ̤ÓÔ˘Ó ÌÂÙ¿ ÙÔ χÛÈÏÔ.  
viii  
TEHLOKE  
Elektrik çarpmas tehlikesinden kaç nmak için:  
7 7  
7
7
7
• Cihaz, elektrik ba lant s için topraklanm fi li bir elektrik kablosuyla birlikte  
5
t
t
gönderilmi tir.  
t
7
7
7
7
• Elektrik kablosunun fi i, elektrik ve toprak ba lant lar usulüne uygun olarak yap lm  
t
t
5
7
7 7  
bir prize tak lmal d r.  
7
7
7
7
• Bu cihaz n ba lanaca di er tüm cihazlar da elektrik ve toprak ba lant lar usulüne  
5
5
5
5
7
7
7
7
7 7  
uygun olarak yap lm t prize tak lm olmal d r.  
t
7 7  
7 7  
• Kapaklar ç karmay n z.  
7 7 7  
kesmek için fi ini prizden çekmeniz gereklidir. Priz, kolayca eri ilebilecek bir yerde  
• Bu cihazda elektri i açma-kapama dü mesi yoktur. Monitörün elektrikle ba lant s n  
5
5
5
t
t
7 7  
olmal d r.  
7
7 7  
7
7
7 7  
7
7 7  
• Bu cihaz elektriksel f rt na s ras nda prize takmay n z veya prizden ç karmay n z.  
7 7  
• Daima monitörünüzle birlikte gönderilen elektrik adaptörünü kullan n z.  
KaldPrma:  
• Bu cihaz ta rken dikkatli olunuz.  
7
7
t
7 7 7  
7 7  
• LCD ekran n içindeki floresan lamba az miktarda (50 mg’den az) c va içerir. Çevre  
7 7  
• Panel yatay konumda çal t r lmamal d r.  
t
7
7
7
kirlenmesine meydan vermemek için bu ürün ehir çöplü üne at lmamal d r. Yerel  
t
5
yönetmeliklerde belirtilen ekilde yok edilmelidir.  
• LCD ekran birimi camdan yap lm t r ve özenle ta nmad ya da dü ürüldü ü  
takdirde k r labilir. Bu, baz durumlarda az miktarda s v kristal maddesinin aç a  
t
7
7
7
7
7 7  
5
t
t
t
5
7
5
7 7  
7
7 7  
7
7
7 7  
ç kmas na neden olabilir. Bu madde tahri edici oldu u için ona dokunmay n z. Bu  
t
5
7
madde cildinize, ellerinize vb temas ederse, etkilenen yer 15 dakika akar su alt nda  
7
7 7  
7
7
7
7
y kanmal d r; y kad ktan sonra da belirtiler devam ederse t bbi yard m istenmelidir.  
ix  
First Edition (JUN 1999)  
This publication could contain technical inaccuracies or typographical errors. Changes  
are made periodically to the information herein; these changes will be made in later  
editions. IBM may make improvements and/or changes in the product(s) and/or  
program(s) at any time.  
It is possible that this publication may contain reference to, or information about, IBM  
products (machines and programs), programming, or services that are not announced  
in your country.  
Requests for copies of this publication and for technical information about IBM products  
should be made to your IBM Authorized Dealer or IBM Retailer.  
No part of this publication may be reproduced or distributed in any form or by any  
means without prior permission in writing from the International Business Machines  
Corporation.  
© Copyright International Business Machines Corporation 1998. All rights reserved.  
Notices  
References in this publication to IBM products, programs, or services do not imply that  
IBM intends to make these available in all countries in which IBM operates. Any  
reference to an IBM product, program or service is not intended to state or imply that  
only IBM’s product, program, or service may be used. Any functionally equivalent  
product, program, or service that does not infringe any of IBM’s intellectual property  
rights or other legally protectable rights may be used instead of the IBM product,  
program, or service. Evaluation and verification of operation in conjunction with other  
products, programs, or services, except those expressly designated by IBM, are the  
user’s responsibility.  
IBM may have patents or pending patent applications covering subject matter in this  
document. The furnishing of this document does not give you any license to these  
patents.  
Trademarks  
The following terms, used in this publication, are trademarks or service marks of the  
IBM Corporation in the United States or other countries:  
IBM  
HelpCenter  
ENERGY STAR is a U.S. registered mark.  
Windows 95 and 98 are Trademarks of Microsoft  
x
Table of Contents  
Introduction  
Features..........................................................................................................A1  
Important Precautions  
On Installation.................................................................................................A2  
On Cleaning....................................................................................................A2  
On Repacking.................................................................................................A2  
Connecting the Monitor  
Connect to any IBM PC ..................................................................................A3  
Connect to an APPLE Macintosh System ......................................................A4  
Setup Diskette for Windows 95/98  
Monitor Installation Disk for Windows® 95/98 .................................................A5  
Location and Function of Controls  
Front View.......................................................................................................A6  
Rear View .......................................................................................................A6  
On Screen Display (OSD) Control Adjustment ....................................A7  
Control Panel Function...................................................................................A7  
On Screen Display (OSD) Selection and Adjustment .......................A9  
Video Memory Modes  
Factory Preset Timing Signal Chart..............................................................A12  
Factory Preset modes...................................................................................A13  
User Modes ..................................................................................................A14  
Recalling Display Modes ..............................................................................A14  
Power Management System  
Power Consumption .....................................................................................A15  
MPR II, Self Diagnostics and DDC  
Low Radiation Compliance (MPR II).............................................................A16  
Self Diagnostics............................................................................................A16  
DDC (Display Data Channel)........................................................................A16  
Troubleshooting and Further Help  
Troubleshooting............................................................................................A17  
Further Help..................................................................................................A18  
Specifications  
Specifications................................................................................................A19  
Compliances......................................................................................................A21  
Environmental Labelling of Personal Computers .........See back of manual  
Warranty...........................................................................................See back of manual  
xi  
038A  
Introduction  
The 9483 Flat Panel Monitor has an active matrix TFT (Thin-Film Transistor) LCD  
(Liquid Crystal Display).  
This monitor is designed for use in small working areas or for those who need  
more working space on the desk.  
Features  
The 9483 is a 15.1-inch (15.1 inches viewable ) intelligent Microprocessor based  
monitor.  
The microprocessor-based 9483 monitor will automatically lock onto the popular  
VESA standard video modes and to the MAC video modes as defined on pages  
A12 and A13 of this guide.  
Screen images are easily adjusted via the digital controls and OSD(On Screen  
Display).  
It supports resolutions up to 1024x768, and has a wide viewing angle of 60  
degrees horizontal and 45 degrees vertical.  
The monitor is shipped with 14 factory pre-programmed video modes that are  
permanently resident. In addition, there are 4 user-storable modes, for a total of  
18 memory modes.  
A1  
Important Precautions  
On Installation  
1. Do not allow anything to rest upon or roll over the power cord, and do not place  
the monitor where the power cord is subject to damage.  
2. Do not use this monitor near water such as near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, or near a swimming pool.  
3. Monitors are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the monitor on a bed, sofa, rug,  
etc.  
Place the monitor in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the monitor near or over a radiator or heat source.  
4. Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
5. Do not press the LCD screen with your finger for a long time as this may incur  
some afterimages.  
6. The LCD contains over 2,300,000 thin-film transistors (TFTs). A small number of  
missing, discolored, or lighted dots on the screen this is an intrinsic characteristic of  
TFT LCD technology and is not an LCD defect. If there is a problem with the LCD,  
contact your IBM representative.  
7. Optimum performance of your 9483 is achieved at 1024x768@60Hz. Other  
modes should be used for diagnostic & setup purpose only.  
On Cleaning  
Unplug the monitor before cleaning the face of the LCD Screen.  
Dust the monitor by wiping the screen and the cabinet with a soft, clean cloth. If  
the screen requires additional cleaning, use a clean, damp cloth.  
Do not use liquid cleaners, solvents or abrasives to clean this product.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
A2  
Connecting the Monitor  
On the back of the monitor are two plug-in connections; one for the AC power  
cord, and the other is for the signal cable from the video card.  
Connect to any IBM PC  
Power off both the monitor and PC.  
1
2
Connect the 15-pin VGA connector of the supplied signal cable to the output  
VGA video connector on the PC and the matching input connector on the rear  
of the monitor. The connectors will mate only one way. If you cannot attach  
the cable easily, turn the connector upside down and try again. When mated,  
tighten the thumbscrews to secure the connection.  
Connect the plug from the AC-DC adapter into the connector on the display  
3
2
1
unit.  
Connect one end of the AC power cord into the AC-DC adapter.  
3
Plug the other end into a properly grounded AC outlet.  
Power ON the PC, then the monitor.  
4
5
If you see the Check Signal Cable message, check the signal cable and  
connectors.  
After using the system, power OFF the monitor, then the PC.  
6
Note : If you see the “Outside Range Limits” message, check to make sure your system is set  
to one of the factory preset modes.(See pages A12 and A13)  
D-15P  
1
3
Power Cord  
Signal Cable  
AC-DC adapter  
2
A3  
Connecting the Monitor  
Connect to an APPLE Macintosh System  
Figure shows the connection to an Apple Macintosh, using a separately  
purchased adapter. For more information on adapter requirements, contact your  
IBM authorized dealer for PartNumber 96G2694.  
Power OFF both the monitor and the MAC.  
1
2
Locate the appropriate MAC to VGA adapter block at your local computer store.  
This adapter changes the high density 3 row 15 pin VGA connector to the  
correct 15 pin 2 row connection to mate with your MAC. Attach the other end of  
the signal cable to the side of the adapter block with 3 rows.  
Connect the attached adapter block/signal cable to the video output on your  
MAC.  
3
4
Connect the plug from the AC-DC adapter into the connector on the display  
2
1
unit. Connect one end of the AC power cord into the AC-DC adapter.  
Plug  
3
the other end into a properly grounded AC outlet.  
Power ON the MAC, then the monitor.  
5
6
If you see the Check Signal Cable message, check the signal cable and  
connectors.  
After using the system, power OFF the monitor, then the MAC.  
7
Note : If you see the Outside Range Limitsmessage, check to make sure your system is set  
to one of the factory preset modes.(See pages A12 and A13)  
Adapter 15P  
D-15P  
1
3
Signal Cable  
Power Cord  
AC-DC adapter  
2
A4  
Setup Diskette for Windows 95/98  
®
Monitor Installation Disk for Windows 95/98  
To use the Plug and Play feature in Windows 95 or Windows 98, files should be  
loaded from the IBM color LCD Monitor Installation diskette as follow:  
Ensure that the monitor is connected correctly.  
1
2
Turn on the monitor and then the system unit. Allow the system to boot into  
windows 95 or 98. The Operating systems Plug and Play code may advise  
you that your system handware has changed. If this is the case,it means that  
it has detected your new monitor for the first time.  
Open the Display Properties windows by clicking on Start, Setting, Control  
Panel and then double clicking on the Display icon.  
3
Select the settings tab.  
4
5
6
7
8
9
Select the Change Display type button.  
Select the Change Monitor Type button.  
Insert the setup diskette into drive A: and select the Have Disk button.  
Select OK.  
Choose IBM 9483 monitor and select OK.  
The files will be copied from the diskette to your hard drive.  
10  
11  
If the selected model name is correct, Close all open windows and take the  
disk out from the disk drive.  
Restart the system to activate the setting.  
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display  
quality. IBM recommends using 1024 x 768 at a refresh rate of 60Hz.  
Windows 95 and 98 are Registered Trademarks of Microsoft Inc.  
A5  
Location and Function of Controls  
Front View  
Power ON/OFF Button  
Power Indicator  
OSD ON/OFF Button  
OSD Selection Buttons  
Mode Recall Button  
OSD Adjustment Buttons  
Brightness Adjustment Buttons  
Rear View  
ID Label  
DC Power Connecter  
D-Sub Signal Connecter  
+
-
A6  
1
3
2
4 5  
6
7
On Screen Display(OSD) Control Adjustment  
1
3
1
2
Start the OSD  
(
) Select an  
Exit the OSD  
( - + ) Adjust the  
level of the selected  
item  
OSD icon to be  
adjusted  
Control Panel Function  
Buttons on the underside of the monitor allow you to adjust the image easily  
through an OSD menu. As you choose controls, the selected icon shows you what  
the chosen control will do. These pictures give you immediate understanding of  
the controls. The following is a description of use for each button.  
OSD ON/OFF Button (  
Use this button to start and exit from the On Screen Display (OSD).  
OSD Selection Buttons (  
)
1
2
3
)
Use these buttons for selecting (highlighting) an OSD icon to be adjusted.  
OSD Adjustment Buttons ( - + )  
Use these buttons for adjusting the level of the selected item.  
Brightness Adjustment Buttons (  
)
4
Use these buttons for adjusting the brightness of screen.  
B r i g h t n e s s  
M i n  
M a x  
A7  
Control Panel Function  
Mode Recall Button (  
If the monitor is operating in a factory preset mode, this control will reset the  
)
5
image to the factory preset mode.  
If the monitor is operating in a user mode, this control has no effect.  
M o d e R e c a l l  
N O  
Y E S  
S E L  
:
E N T  
:
- +  
Power Indicator (  
)
6
This Indicator lights up green when the monitor operates normally.  
If the monitor is in DPM (Energy Saving) mode (stand-by/ suspend/power  
off), this indicator color changes to amber.  
Power ON/OFF Button (  
This button is used to turn the monitor ON and OFF.  
)
7
A8  
On Screen Display (OSD) Selection and Adjustment  
You were introduced to the procedure of selection and adjusting an item using  
the OSD system.  
Listed below are the icons, icon names, and icon descriptions of the items that  
are shown on the Menu.  
OSD Adjust  
Contrast  
Description  
To adjust the display to the contrast desired.  
C o n t r a s t  
M i n  
M a x  
A D J :  
OSD  
- +  
S E L :  
H Position  
To move picture image left and right.  
H
P o s i t i o n  
- Moves the screen image left.  
+ Moves the screen image right.  
M i n  
M a x  
A D J :  
OSD  
- +  
S E L :  
V Position  
To move image up and down.  
V
P o s i t i o n  
- Moves the screen image down.  
+ Moves the screen image up.  
M i n  
M a x  
A D J :  
OSD  
- +  
S E L :  
Clock  
To minimize any vertical bars or stripes visible  
on the screen background.  
C l o c k  
The horizontal screen size will also change.  
M i n  
M a x  
OSD  
- +  
A D J :  
S E L :  
NOTE :  
To obtain the optimum performance from your new monitor it may be  
necessary to perform fine adjustments of Clockand Clock Phase”  
controls. This may require to be done on the first usage of a mode to  
eliminate vertical bars and horizontal noise respectively.  
Optimum mode is 1024 x 768 @ 60Hz  
Use of 50% grey background is not recommended.  
A9  
On Screen Display (OSD) Selection and Adjustment  
OSD Adjust  
Clock Phase  
Description  
To adjust the focus of the display.  
This item allows you to remove any horizontal noise  
and clear or sharpen the image of characters.  
C l o c k P h a s e  
M i n  
M a x  
OSD  
- +  
A D J :  
S E L :  
OSD Time  
To select OSD display duration time.  
(5 - 100 seconds)  
O S D T i m e  
5 0 S e c o n d s  
OSD  
- +  
A D J :  
S E L :  
Color Select  
To select color temperature, 9300K/ 6500K and  
USER.  
9 3 0 0 K 6 5 0 0 K U s e r  
9300K : Slightly bluish white.  
6500K : Warm-white tone, similar to white paper or  
daylight. This temperature is good for video-  
image display. This is the default setting for  
your monitor.  
OSD  
- +  
S E L :  
M A I N :  
9 3 0 0 K 6 5 0 0 K U s e r  
R
G
B
Select the desired color temperature or select user to  
set your own color levels.  
R e c a l l  
:
-
+
OSD  
- +  
A D J :  
S E L :  
To adjust USER, select the + button. Allow for specific  
adjustments to Red, Green, Blue (R/G/B) and (Color)  
Recall. Select the Recall to reset the color to the  
default setting.  
A10  
On Screen Display (OSD) Selection and Adjustment  
Description  
OSD Adjust  
OSD  
OSD Position  
This item gives access to 2 elements : Horizontal  
position and Vertical position.  
OSD  
O S D P o s i t i o n  
Press the select button to select the desired item to  
change.  
H
V
P o s i t i o n  
P o s i t i o n  
OSD  
To correct OSD image's Horizontal position and  
Vertical position.  
- +  
A D J :  
S E L :  
Horizontal position : To move image right and left.  
Vertical position : To move image up and down.  
Language Select  
To choose the language in which the control  
names are displayed.  
L a n g u a g e  
OSD Menus are available in five language : English,  
German, French, Spanish, and Italian.  
E N D E F R E S I T  
[ E n g l i s h ]  
OSD  
- +  
M A I N :  
S E L :  
Information  
To inform users of preset and user mode data.  
I n f o r m a t i o n  
1 0 2 4 X 7 6 8 / 7 5 H z  
P r e s e t M o d e : 1 4  
U s e r  
M o d e :  
0
OSD  
- +  
- +  
- +  
M A I N :  
M A I N :  
M A I N :  
M O D E :  
P r e s e t M o d e  
1
2
3
4
5
6
7
8
3 1 . 5 k H z  
3 1 . 5 k H z  
3 1 . 5 k H z  
3 5 . 0 k H z  
3 7 . 9 k H z  
3 7 . 5 k H z  
3 5 . 2 k H z  
3 7 . 9 k H z  
/
/
/
/
/
/
/
/
7 0 H z  
7 0 H z  
6 0 H z  
6 7 H z  
7 3 H z  
7 5 H z  
5 6 H z  
6 0 H z  
N E X T :  
U s e r M o d e  
T h e E n d  
N E X T :  
A11  
Video Memory Modes  
The monitor has 18 memory locations for display modes, 14 of which are factory  
preset to popular video modes.  
Factory Preset Timing Signal Chart  
Video  
Sync  
B
A
C
F
D
E
Mode1  
Mode2  
Mode3  
Mode4  
Mode5  
Mode6  
Mode7 Symbol  
Polarity  
Frequency  
Total Period pixels  
+
-
-
-
-
-
+
H
O
R
I
Z
O
N
T
A
L
kHz 31.468  
31.468  
900  
720  
180  
17  
31.469  
800  
640  
160  
16  
35.00  
864  
640  
224  
64  
37.861  
832  
640  
192  
24  
37.50  
840  
640  
200  
16  
35.156  
800  
640  
160  
16  
96  
48  
-
1024  
800  
224  
24  
E
A
B
C
D
F
Data Period  
Blanking  
pixels  
pixels  
Front Porch pixels  
Pulse Width pixels  
108  
55  
96  
64  
40  
64  
72  
Back Porch  
Polarity  
pixels  
48  
96  
128  
-
120  
-
128  
+
+
-
-
V
E
R
T
I
C
A
L
Frequency  
Total Period  
Data Period  
Blanking  
Hz  
lines  
lines  
lines  
lines  
lines  
lines  
70  
449  
350  
99  
37  
2
70  
60  
66.67  
525  
480  
45  
72.8  
520  
480  
40  
75.0  
500  
480  
20  
56.25  
625  
600  
25  
449  
400  
49  
525  
480  
45  
E
A
B
C
D
F
Front Porch  
Pulse Width  
Back Porch  
13  
10  
3
9
1
1
2
2
3
3
3
2
60  
34  
33  
39  
28  
16  
22  
640  
720  
x400  
(Text)  
640  
640  
640  
640  
800  
Resolution  
Recall  
x350  
x480  
x480  
x480  
x480  
x600  
YES  
YES  
YES  
YES  
YES  
YES  
YES  
Note : Timings are as detailed in VESA Display Monitor Timing Specification. Version 1.0,  
Revision 0.7, Dated 12/18/96.  
A12  
Factory Preset Modes  
Mode8  
Mode9 Mode10 Mode11 Mode12 Mode13 Mode14 Symbol  
Polarity  
+
+
48.077  
1040  
800  
240  
56  
+
46.875  
1056  
800  
256  
16  
-
49.725  
1152  
832  
320  
32  
-
48.363  
1344  
1024  
320  
24  
-
56.476  
1328  
1024  
304  
24  
+
60.023  
1312  
1024  
288  
16  
H
O
R
I
Z
O
N
T
A
L
Frequency  
kHz 37.879  
Total Period pixels  
1056  
800  
256  
40  
E
A
B
C
D
F
Data Period  
Blanking  
pixels  
pixels  
Front Porch pixels  
Pulse Width pixels  
128  
88  
120  
64  
80  
64  
136  
160  
-
136  
144  
-
96  
Back Porch  
Polarity  
pixels  
160  
+
224  
-
176  
+
+
+
V
E
R
T
I
C
A
L
Frequency  
Total Period  
Data Period  
Blanking  
Hz  
lines  
lines  
lines  
lines  
lines  
lines  
60.3  
628  
600  
28  
72.188  
666  
600  
66  
75.0  
625  
600  
25  
74.55  
667  
624  
43  
60.0  
806  
768  
38  
70.0  
806  
768  
38  
75.0  
800  
768  
32  
E
A
B
C
D
F
Front Porch  
Pulse Width  
Back Porch  
1
37  
1
1
3
3
1
4
6
3
3
6
6
3
23  
23  
21  
39  
29  
29  
28  
800  
800  
800  
832  
1024  
x768  
1024  
x768  
1024  
x768  
Resolution  
Recall  
x624  
x600  
x600  
x600  
(MAC)  
YES  
YES  
YES  
YES  
YES  
YES  
YES  
Note : Timings are as detailed in VESA Display Monitor Timing Specification. Version 1.0,  
Revision 0.7, Dated 12/18/96.  
A13  
User Modes  
Modes 15-18 are empty and can accept new video data. If the monitor detects a  
new video mode that has not been present before or is not one of the preset  
modes, it stores the new mode automatically in one of the empty modes starting  
with mode 15.  
If you use the 4 blank modes and still have more new video modes, the monitor  
replaces the information in the user modes starting with mode 15.  
Recalling Display Modes  
When your monitor detects a mode it has seen before, it automatically recalls the  
image settings you may have made the last time you used that mode.  
You may, however, manually force a recall of each of the 14 preset modes by  
pressing the Recall button. All preset modes are automatically recalled as the  
monitor senses the incoming signal.  
The ability to recall the preset modes is dependent on the signal coming from  
your PCs video card or system. If this signal does not match any of the factory  
modes, the monitor automatically sets itself to display the image.  
A14  
Power Management System  
This monitor incorporates new circuitry for lowering energy usage during idle  
time, following the Display Power Management Signalling (DPMS) guide lines of  
the Video Electronics Standards Association (VESA), as an Energy Star Partner,  
IBM has determined that this product meets the Energy Star guidelines for  
energy efficiency.  
For the power savings feature to operate, the monitor must be used with a PC  
having power saving circuitry. The monitor has three power-saving states, and  
the power saving operation is indicated by the power indicator on the front panel.  
When the power indicator is green, operation is normal. When the power  
indicator is amber, the monitor is in a power saving mode.  
If the power indicator is amber, press the power button to turn on the monitor. If  
the power indicator is amber and you wish to use the PC again, move your  
mouse pointer or touch a keyboard button. When the monitor is not in use, save  
energy by turning it off.  
Power Consumption  
Power  
Video  
Mode  
H.Sync V.Sync  
LED Color  
Consumpion  
On  
Off  
On  
Off  
On  
On  
Off  
Off  
Green  
Amber  
Amber  
Amber  
Normal  
Off  
Off  
Normal(Max.)  
Stand-by  
Suspend  
36W  
5W  
5W  
5W  
Off  
Power off  
A15  
Low Radiation Compliance (MPR II)  
This monitor meets one of the strictest guidelines available today for low radiation  
emissions, offering the user extra shielding and an anti-static screen coating.  
These guidelines, set forth by a government agency in Sweden, limit the amount  
of emission allowed in the Extremely Low Frequency (ELF) and Very Low  
Frequency (VLF) electromagnetic range.  
Self Diagnostics  
This monitor can sense when there is a possible problem present and informs  
you of this condition by presenting you with a SELF DIAGNOSTICS OSD. This  
OSD may pop up when it is ON but no signal is detected. In this case the  
message Check Signal Cable will be highlighted, alerting you to check the signal  
cable connections.  
C h e c k S i g n a l C a b l e  
DDC (Display Data Channel)  
DDC is a communication channel over which the monitor automatically informs  
the host system (PC) about its capabilities.This monitor has DDC function;  
DDC2B carries out uni-directional communication between the PC and the  
monitor. Under these situations, the PC sends display data to the monitor but not  
commands to control the monitor settings.  
NOTE :  
PC must support DDC functions to do this.  
Some older computer systems are not compatible with the DDC  
standard. If your monitor is displaying a monochrome image or the  
wrong resolution, you need to change to a DDC compatible VGA  
card.  
A16  
Troubleshooting  
Any horizontal noise appearing in any image or characters are not  
clearly portrayed.  
The input signal data has not been optimized for the current operating  
mode. (Adjust the CLOCK PHASE by using the OSD function.)  
Check Signal Cable message.  
The signal cable is not connected.  
Outside Range Limits message appears.  
Picture is blank.  
The frequency of the signal from the video card is outside the operating  
range of the monitor.  
* Use the graphics board's utility software to change the frequency setting (Refer to  
the manual for graphics board).  
* You can change the setup to the supported resolution using the Windows 95/98  
Safety Mode (Press the F8 key during booting the system.) or see User Manual for  
equivalent messages in other relevant Operating Systems.  
The power LED is illuminated amber.  
Display power management mode.  
There is no active signal coming from the PC.  
The signal cable is not fastened securely.  
Check the computer power and graphics adapter configuration.  
The image on the SCREEN is not centered.  
Image adjustment has not been performed for current mode. Select H  
position, V position and Clock via OSD and adjust to desired position.  
The monitor does not enter the power saving off mode (Amber).  
Computer video signal is not VESA DPMS standard. Either the PC or the  
video controller card is not using the VESA DPMS power management  
function.  
Noise in 50% Grey Background might sometimes be difficult to  
totally eliminate using Clock & Clock Phase Controls.  
Slight variations in timing from system units graphics sub-system. [Via  
Desktop change background pattern to solid colour].  
A17  
Further Help  
If you are unable to correct the problem yourself, you may seek further help as follows:  
Call IBM HELPCENTER.  
In the US call 1-800-772-2227  
In Canada call 1-800-565-3344  
In other countries, contact your dealer, retailer, or other IBM authorized servicer.  
Before calling, please have available as much of the following information as possible:  
1. Type, model and serial number from the label on the back of your monitor.  
2. Purchase receipt.  
3. Description of problem.  
4. Computer type and model.  
5. System configuration(hardware fitted etc.).  
6. System BIOS version number.  
7. Operating System and version number.  
8. Display driver version number.  
If possible, stay by your computer system. Your technical support representative might  
want to go through the problem with you during the call.  
EMEA HelpDesk  
This service is open Monday through Friday during normal business hours. IBM may  
change the availability of this service without any further notice.  
Austria  
Belgium  
Belgium  
Denmark  
Finland  
France  
Germany  
Ireland  
Italy  
01-54658-5060  
02-714-3515 (French)  
02-714-3570 (Vlaams)  
03-525-0291  
9-22-931840  
01-6932-4040  
069-6654-9040  
01-8159202  
02-482-75040  
Luxembourg 298-977-5063  
Netherlands  
Norway  
Portugal  
020-504-0501  
2-305-3240  
01-7915147  
02-2071147  
01-662-4916  
08-751-5227  
0848-805252  
01475-555055  
Spain  
Sweden  
Switzerland  
UK  
A18  
Specifications  
Sync Signal type  
Type  
H. sync  
V.sync  
Separate sync  
H. sync  
V. sync  
Signal Connector Pin Assignment  
1
5
Pin  
Separate Sync  
Pin  
Separate Sync  
6
10  
11  
15  
1
2
3
4
5
6
7
8
Red  
Green  
Blue  
Ground  
Self-Test  
Red Ground  
Green Ground  
Blue Ground  
9
NC  
10  
11  
12  
13  
14  
15  
Ground  
Ground  
SDA  
Horizontal Sync  
Vertical Sync  
SCL  
AC-DC Adapter  
Input  
AC 100-240V, 50-60Hz, 81-120VA, 1.2A  
+
-
Out put  
DC 24V 1.5A  
Use only the AC-DC adapter supplied with the monitor.  
A19  
Specifications  
Display  
Type  
15.1inch (38.36cm) Flat Panel Active matrix-TFT LCD,  
Anti-Glare coating  
15.1inch (38.36cm)  
0.3 x 0.3mm  
Viewable Size  
Pixel pitch  
True color  
16.7million  
Sync Input  
Horizontal Freq.  
Vertical Freq.  
Input form  
Refer to pages A12 and A13 for mode timing parameters  
Refer to pages A12 and A13 for mode timing parameters  
Separate, TTL, Positive/Negative  
Signal input  
15 pin D-Sub connector  
Video Input  
Display Area  
Input Form  
307 x 230mm  
Separate, RGB Analog, 0.7Vp-p/75ohm, Positive  
Resolution  
XGA 1024 x 768/ 75Hz max  
DC 24V 1.2A  
Power Input  
Dimensions  
15.95 x 7.17 x 14.25inch / 405 x 182 x 362mm  
(WxDxH)  
Weight ( net )  
Tilt Range  
5.4kg / 11.9lbs  
Down  
Up  
5˚  
30˚  
Environment  
Operating condition  
Temperature  
Humidity  
10˚C to 35˚C  
10% to 80% non-condensing  
Storage condition  
Temperature  
Humidity  
-20˚C to 60˚C  
5% to 95% non-condensing  
Information in this document is subject to change without notice and does not represent a  
commitment on the part of IBM.  
A20  
Compliances  
Federal Communications Commission (FCC) Statement  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult an IBM authorized dealer or service representative for help.  
Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits.  
Proper cables and connectors are available from IBM authorized dealers. IBM is not responsible for any radio  
or television interference caused by using other than recommended cables and connectors or by  
unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void  
the users authority to operate the equipment.  
Power Cords  
For your safety, IBM provides a power cord with a grounded attachment plug to use with this IBM product. To  
avoid electrical shock, always use the power cord and plug with a properly grounded power outlet.  
IBM power cords used in the United States and Canada are listed by the Underwriters Laboratories (UL) and  
certified by the Canadian Standards Association (CSA).  
For units intended to be operated at 115 volts: Use a UL listed and CSA certified cord set consisting of a  
minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5 meters (15 feet) in length and a  
parallel blade, grounding type attachment plug rated 15 amperes, 125 volts.  
For units intended to be operated at 230 volts (U.S. use): Use a UL listed and CSA certified cord set  
consisting of a minimum 18 AWG, type SVT or SJT, three conductor cord, a maximum of 4.5 meters (15 feet)  
in length and a tandem blade, grounding type attachment plug rated 15 amperes 250 volts.  
For units intended to be operated at 230 volts (outside the U.S.): Use a cord set with a grounding type  
attachment plug rated 13 amperes (minimum), 250 volts. The cord set should be marked <HAR> and have  
the appropriate safety approvals for the country in which the equipment will be installed.  
As an ENERGY STAR® Partner, IBM Corporation has  
determined that this product meets the ENERGY STAR  
guidelines for energy efficiency.  
This monitor complies with  
TCO95 guidelines.  
A21  
Compliances  
MPRII  
This product complies with Swedish National Council for Metrology (MPR) standards issued in December  
1990 (MPRII) for very low frequency (VLF) and extremely low frequency (ELF).  
Hinweise  
Gemäß der Amtsblätter des BMPT Nr. 61/1991 und 6/1992 wird der Betreiber darauf aufmerksam gemacht,  
dass die von ihm mit diesem Gerät zusammengestellte Anlage auch den technischen Bestimmungen dieser  
Amtsblätter genügen muss.  
Aus ergonomischen Gründen wird empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu  
verwenden (schlechte Erkennbarkeit,Augenbelastung bei zu geringem Zeichenkontrast).  
Aus ergonomischen Gründen sollten nur Darstellungen auf dunklem Hintergrund bei Vertikalfrequenzen ab 60  
Hz (ohne Zeilensprung) benutzt werden.  
Die Konvergenz des Bildes kann sich aufgrund des Magnetfeldes am Ort der Aufstellung aus der korrekten  
Grundeinstellung verändern. Zur Korrektur empfiehlt es sich deshalb, die Regler an der Frontseite für H STAT  
und V STAT so einzustellun, daß die getrennt sichbaren Farblinien für Rot. Grün und Blau bei z.B. der  
Darstellung eines Buchstabens zur Deckung (Konvergenz) gelangen. Siehe hierzu auch die Erklärungen zu H  
STAT und V STAT.  
Industry Canada Compliance Statement  
This Class B digital apparatus meets the requirements of the Canadian Interference-Causing Equipment  
Regulations.  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur  
du Canada.  
European Union (EU) Statement  
This product has been tested and found to comply with the limits for Class B Information Technology  
Equipment according to CISPR 22 / European Standard EN 55022. The limits for Class B equipment were  
derived for typical residential environments to provide reasonable protection against interference with licensed  
communication devices.  
Properly shielded and grounded cables and connectors must be used in order to reduce the potential for  
causing interference to radio and TV communications and to other electrical or electronic equipment. Such  
cables and connectors are available from IBM authorised dealers.  
In accordance with EN 50082-1 1992, Performance Criterion A:, it should be noted that in the presence of  
certain electromagnetic fields, some screen jitter may be observed.  
æ
u
dgÆQ' K§ ´¢˜  
u˝  
gÆQh~  
A{  
A
I˘  
æ
æ
æ
u
iZ  
n
˝»  
‰n  
¤¢˜gp‡ŒØ  
«
æ
u
K
j¯Z  
B
n
¯
d
u
dgÆQ' K§ƒc  
iVCCI j  
˜ ¤ Ł  
'
u
WI  
Ae rW  
¢ ˜ ‡¢  
M@  
˜†gp ¨Ø˘  
B
A
MÆQ  
·
˘¨Ø–˘“  
Ł
B
]`˜‡  
¢
Ł
x
{»i }j  
A
L
¨¢ß@¯†fi¨˙  
Łtfl  
˜O ˜' s`˜› ‡¢  
˘
{•Ø–˘˝ºfl¯•  
¯
A
˛
fl˜› ‡¢  
A –‡  
B
gEXC[x X^  
h
A
ŁO –‡Œ˜¢Ø@  
Œ
˝
d„ It  
!
Œ˜¢ØP[u  
B
A22  
back of the manual  
Environmental Labelling of Personal Computers  
Congratulations! You have just purchased a TCO’95 approved and labelled product! Your  
choice has provided you with a product developed for professional use. Your purchase has also  
contributed to reducing the burden on the environment and to the further development of  
environmentally-adapted electronic products.  
Why do we have environmentally-labelled computers?  
In many countries, environmental labelling has become an established method for encouraging  
the adaptation of goods and services to the environment.  
The main problem as far as computers and other electronic equipment are concerned is that  
environmentally harmful substances are used both in the products and during their manufacture.  
Since it has not been possible so far for the majority of electronic equipment to be recycled in a  
satisfactory way, most of these potentially damaging substances sooner or later enter Nature.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from both the working and natural environment viewpoints. Since all types of  
conventional electricity generation have a negative effect on the environment (acidic- and  
climatic-influencing emissions, radioactive waste, etc.), it is vital to conserve energy. Electronic  
equipment in offices consumes as enormous amount of energy, since it is often routinely left  
running continuously.  
What does labelling involve?  
This product meets the requirements for the TCO’95 scheme, which provides for international  
environmental labelling of personal computers. The labelling scheme was developed as a joint  
effort by the TCO (The Swedish Confederation of Professional Employees),  
Naturckyddsföreningen (The Swedish Society for Nature Conservation), and NUTEK (The  
National Board for Industrial and Technical Development in Sweden), and SEMKO AB (an  
international certification agency).  
Environmental Labelling of Personal Computers  
The requirements cover a wide range of issues: environment, ergonomics, usability, emission of  
electrical and magnetic fields, energy consumption and electrical and fire safety.  
The environmental demands concern, among other things, restriction on the presence and use of  
heavy metals, brominated and chlorinated flame retardants, CFCs (freons), and chlorinated  
solvents. The product must be prepared for recycling, and the manufacturer is obliged to have  
an environmental plan, which must be adhered to in each country where the company  
implements its operational policy.  
The energy requirements include a demand that the computer and/or display, after a certain  
period of inactivity, shall reduce its power consumption to a lower level, in one or more stages.  
The length of time to reactivate the computer shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the  
reduction of electric and magnetic fields, along with physical and visual ergonomics and good  
usability.  
The following is a brief summary of the environmental requirements met by this product. The  
complete environmental criteria document may be ordered from:  
TCO Development Unit  
Linnegatan 14, S-11494 Stockholm, Sweden  
FAX +46-8 782 92 07  
E-mail (Internet): [email protected]  
Current information regarding TCO’95 approved and labelled products may also be obtained on  
the Internet using the address:  
TCO’95 is a co-operative project between:  
SEMKO  
NUTEK  
Naturskydds  
föreningen  
Närings- och teknikutvecklingsverket  
Environmental Labelling of Personal Computers  
TCO95 Environmental Requirements  
Brominated flame retardants are present in printed circuit boards, cabling, casings, and  
housings, and are added to delay the spread of fire. Up to 30% of the plastic in a computer  
casing can consist of flame-retardant substances. These are related to another group of  
environmental toxins, PCBs, and are suspected of giving rise to similar harm, including  
reproductive damage in fish-eating birds and mammals. Flame retardants have been found in  
human blood, and researchers fear that they can disturb fetus development.  
1
Bio-accumulative TCO’95 demands require that plastic components weighing more than 25  
grams must not contain flame retardants with organically bound chlorine or bromine.  
Lead can be found in picture tubes, display screens, solder, and capacitors. Lead damages the  
nervous system and in higher doses causes lead poisoning. The relevant bio-accumulative  
TCO’95 requirement permits the inclusion of lead, as no replacement has yet been developed.  
Cadmium is present in rechargeable batteries and in the color-generating layers of certain  
computer displays. Cadmium damages the nervous system and is toxic in high doses. The  
relevant bio-accumulative TCO’95 requirement states that batteries may not contain more than  
25 ppm (parts per million) of cadmium. The color-generating layers of display screens must not  
contain any cadmium.  
Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervous  
system and is toxic in high doses.  
TCO’95 requirement states that batteries may not contain more than 25 ppm (parts per million)  
of mercury. It also demands that no mercury is present in any of the electrical or electronics  
components concerned with the display unit. Mercury is, for the time being, permitted in the  
back light system of flat panel monitors as there today is no commercially available alternative.  
TCO aims on removing this exception when a mercury free alternative is available.  
CFCs (freons) are sometimes used for washing printed circuit boards and in the manufacture of  
expanded foam for packaging. CFCs break down ozone and thereby damage the ozone layer in  
the atmosphere, causing increased reception on Earth of ultra-violet light with consequent  
increased risks of skin cancer (malignant melanoma). The relevant TCO’95 requirement:  
Neither CFCs nor HCFCs may be used during the manufacture of the product or its packaging.  
Environmental Labelling of Personal Computers  
Shipping Package  
The packaging material can be recycled, or you can save it to return the monitor to a  
service center for repair or disposal.  
CFC Compounds in Distribution Packaging  
Cushioning material used for shipping finished monitors are not manufactured with nor do  
they contain any CFC compounds.  
Design for Disassembly/Recycling  
These monitors have been designed for easy end-of-life disassembly and recycling.  
Fasteners are generally of the same type for efficient disassembly. Components made of  
different materials can be easily separated and plastics have been identified using  
intermational symbols to aid in recycling.  
Monitor Disposal  
WARNING  
If you need to dispose of a monitor, ask a qualified service representative for the  
proper procedure.  
Warranty  
Statement of Limited Warranty  
The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally  
purchase for your use, and not for resale, from IBM or your reseller. The term Machinemeans an IBM  
machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. Unless  
IBM specifies otherwise, the following warranties apply only in the country where you acquire the Machine. If  
you have any questions, contact IBM or your reseller.  
Machine:  
9483  
Warranty Period*:  
Three years  
*Contact your place of purchase for warranty service information.  
Production Status  
Each Machine is manufactured from new parts, or new and used parts. In some cases, the Machine may not  
be new and may have been previously installed. Regardless of the Machines production status, IBMs  
warranty terms apply.  
The IBM Warranty for Machines  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2) conforms to  
IBMs Official Published Specifications. The warranty period for a Machine is a specified, fixed period  
commencing on its Date of Installation. The date on your receipt is the Date of Installation, unless IBM or your  
reseller informs you otherwise.  
During the warranty period IBM or your reseller, if authorized by IBM, will provide warranty service under the  
type of service designated for the Machine and will manage and install engineering changes that apply to the  
Machine.  
For IBM or your reseller to provide warranty service for a feature, conversion, or upgrade, IBM or your reseller  
may require that the Machine on which it is installed be 1) for certain Machines, the designated, serial-  
numbered Machine and 2) at an engineering-change level compatible with the feature, conversion, or  
upgrade. Many of these transactions involve the removal of parts and their return to IBM. You represent that  
all removed parts are genuine and unaltered. A part that replaces a removed part will assume the warranty  
service status of the replaced part.  
If a Machine does not function as warranted during the warranty period, IBM or your reseller will repair it or  
replace it with one that is at least functionally equivalent, without charge. The replacement may not be new,  
but will be in good working order. If IBM or your reseller is unable to repair or replace the Machine, you may  
return it to your place of purchase and your money will be refunded.  
If you transfer a Machine to another user, warranty service is available to that user for the remainder of the  
warranty period. You should give your proof of purchase and this Statement to that user. However, for  
Machines which have a life-time warranty, this warranty is not transferable.  
Warranty Service  
To obtain warranty service for the Machine, you should contact your reseller or call IBM. In the United States,  
call IBM at 1-800-772-2227. In Canada, call IBM at 1-800-565-3344. You may be required to present proof of  
purchase.  
IBM or your reseller will provide certain types of repair and exchange service, either at your location or at  
IBMs or your resellers service center, to restore a Machine to good working order.  
When a type of service involves the exchange of a Machine or part, the item IBM or your reseller replaces  
becomes its property and the replacement becomes yours. You represent that all removed items are genuine  
and unaltered. The replacement may not be new, but will be in good working order and at least functionally  
equivalent to the item replaced. The replacement assumes the warranty service status of the replaced item.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove all features, parts, options,  
alterations, and attachments not under warranty service. You also agree to ensure that the Machine is free of  
any legal obligations or restrictions that prevent its exchange.  
Warranty  
You agree to:  
1. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own;  
and  
2. where applicable, before service is provided -  
a) follow the problem determination, problem analysis, and service request procedures that IBM or  
your reseller provide,  
b) secure all programs, data, and funds contained in a Machine, and  
c) inform IBM or your reseller of changes in a Machines location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBMs possession or 2) in transit in  
those cases where IBM is responsible for the transportation charges.  
Extent of Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
The warranties may be voided by misuse, accident, modification, unsuitable physical or operating  
environment, improper maintenance by you, removal or alteration of Machine or parts identification labels, or  
failure caused by a product for which IBM is not responsible.  
THESE WARRANTIES REPLACE ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR CONDITIONS OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU  
SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM  
JURISDICTION TO JURISDICTION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR  
LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION  
MAY NOT APPLY TO YOU. IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE  
WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBMs part or other liability you are entitled to  
recover damages from IBM. In each such instance, regardless of the basis on which you are entitled to claim  
damages from IBM (including fundamental breach, negligence, misrepresentation, or other contract or tort  
claim), IBM is liable only for:  
1. damages for bodily injury (including death) and damage to real property and tangible personal property;  
and 2. the amount of any other actual direct damages or loss, up to the greater of U.S. $100,000 or the  
charges (if recurring, 12 monthscharges apply) for the Machine that is the subject of the claim.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-PARTY  
CLAIMS AGAINST YOU FOR LOSSES OR DAMAGES (OTHER THAN THOSE UNDER THE FIRST ITEM  
LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPECIAL,  
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES  
(INCLUDING LOST PROFITS OR SAVINGS), EVEN IF IBM OR YOUR RESELLER IS INFORMED OF  
THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT  
APPLY TO YOU.  
For European warranty terms and conditions refer to enclosed IBM warranty statement Part Number  
72H9623.  
Référez-vous à la garantie IBM N˚ de référence 72H9623 pour les conditions de garantie européennes.  
Die europäischen Garantiebedingungen finden Sie in der bergefügten IBM-Gewährleistungserklärung.  
Teilenummer 72H9623.  
Los términos y condiciones de las garantías en Europa se recogen en la declaración de garantía adjunta  
numero de pieza IBM 72H9623.  
Per le condizioni e i termini di garanzia relativi ai paesi europei, consultare lapposita dichiarazione IBM  
(numero di matricola 72H9623).  

JVC AV 25MX76 User Manual
Lenovo THINKCENTRE 9636 User Manual
NEC Electronics America Computer Monitor LCD190V User Manual
NEC Electronics America Cordless Telephone 1093092 User Manual
Oki 70042401 User Manual
Philips 17AA3346 User Manual
Philips 27PTG015D User Manual
Philips 34PW850H User Manual
Philips CD1502B User Manual
Philips Mono FSQ 21PT1556 User Manual