IBM 6517 6LN User Manual

6517-6LN  
E74M Color Monitor  
User Guide  
Table of Contents  
Precautions.......................................................................................A2  
Workplace Preparation .................................................................A2  
Working Practices.........................................................................A2  
Monitor Driver Installation............................................................A4  
Driver installation for Windows 95 or Windows 98 ......................A4  
Driver installation for Windows 2000 or Windows Me .................A5  
Driver installation for Windows XP ...............................................A6  
Control Panel Function...................................................................A7  
Front Panel Controls......................................................................A7  
On Screen Display (OSD) Control Adjustment........................A8  
On Screen Display (OSD) Selection and Adjustment...............A9  
Troubleshooting.....................................................................A14  
Specifications ........................................................................A16  
Using the Audio Functions.....................................................A18  
Side Jacks....................................................................................A18  
Rear Panel Jacks..........................................................................A18  
Microphone Operation ...............................................................A18  
LINE OUT...................................................................................A18  
Front Panel Controls....................................................................A19  
On Screen Display (OSD) Selection and Adjustment.............A20  
Audio Specifications..............................................................A21  
Audio Specifications ...................................................................A21  
Service Information.....................................................................A21  
A1  
Precautions  
Workplace Preparation  
Positioning the Monitor  
Choose a suitable place to position the monitor where it is not near  
fluorescent desk lighting or any equipment that produces magnetic fields  
that could cause interference. Ensure that the furniture or equipment can  
support the weight of the monitor. Allow at least 50mm (2 in.) ventilation  
space around the monitor.  
Height  
Position the monitor so that the top of the screen is slightly below your  
eye level when you sit at your workstation.  
Orientation  
- Choose a position that gives the least reflection from lights and  
windows, usually at a right angle to any windows.  
- Position the monitor directly in front of you so that you do not have to  
twist your body.  
- Tilt the monitor to a comfortable viewing angle.  
Working Practices  
Rest  
Take regular breaks. Vary your posture, and stand up and stretch  
occasionally as prolonged use of computer workstations can be tiring.  
Back  
Sit back in the chair and use the back rest.  
Hands  
Use a light touch on the keyboard, keeping your hands and fingers  
relaxed. Allow a space in front of the keyboard to rest your wrists when  
not typing. Consider using a wristpad.  
Eyesight  
Working with monitors, in common with any prolonged close work, can  
be visually demanding. Look away from the screen periodically and have  
your eyesight checked regularly.  
A2  
Precautions  
Screen settings  
Set the screen brightness and contrast to a comfortable level. You may  
have to adjust this as the lighting changes during the day. Many  
application programs let you select color combinations which can help  
you to view in comfort.  
Power Cord  
For safe operation, use the power cord supplied with the unit.  
Notes  
Do not install the monitor in a location near heat sources such as  
radiators or air ducts, or in a place subject to direct sunlight, or  
excessive dust or mechanical vibration or shock.  
Save the original shipping carton and packing materials, as they will  
come in handy if you ever have to ship your monitor.  
To keep the monitor looking new, periodically clean it with a soft cloth.  
Stubborn stains may be removed with a cloth lightly dampened with a  
mild detergent solution. Never use strong solvents such as thinner,  
benzene, or abrasive cleaners, since these will damage the cabinet. As  
a safety precaution, always unplug the monitor before cleaning it.  
A3  
Monitor Driver Installation  
Driver installation for Windows 95 or Windows 98  
To use the Plug and Play feature in Microsoft®Windows®95 or  
Windows 98, files should be loaded from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows 95 or Windows 98.  
Your computer’s Plug and Play code may warn you that your system  
hardware has changed. This means that it has detected your new  
monitor for the first time.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
• In case of Windows 95 :  
6 - 1.Click the CHANGE DISPLAY TYPE button.  
2.Click the CHANGE MONITOR TYPE button.  
• In case of Windows 98 :  
6 - 1.Click the ADVANCED button.  
2.Click the MONITOR tab.  
3.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on  
CHANGE button and then select the NEXT button.  
4.Click the “Display a list of the known drivers for this device so that  
I can choose a specific driver” and then select the NEXT button.  
7. Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
8. Click OK.  
9. Ensure that the CD drive letter is selected.  
10.Choose IBM E74M monitor and Click OK. The files will be copied  
from the CD to your hard disk drive.  
11. Close all open windows and remove the CD.  
12.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A4  
Monitor Driver Installation  
Driver installation for Windows 2000 or Windows Me  
To use the Plug and Play feature in Microsoft Windows 2000 or  
Microsoft Windows Millennium Edition(Me) files should be loaded  
from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows 2000 or Windows Me.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
6. Click the ADVANCED button.  
7. Click the MONITOR tab.  
8. Click the PROPERTIES button.  
9. Click the DRIVER tab.  
10.Open the UPGRADE DEVICE DRIVER WIZARD window by clicking on UPDATE  
DRIVER and then Click the NEXT button.  
11. Select the “Display a list of the known drivers for this device so that I  
can choose a specific driver” and then Click the NEXT button.  
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
13.Click OK.  
14.Ensure that the CD drive letter is selected.  
15.Choose IBM E74M monitor and Click OK. The files will be copied  
from the CD to your hard disk drive.  
16.Close all open windows and remove the CD.  
17.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A5  
Monitor Driver Installation  
Driver installation for Windows XP  
To use the Plug and Play feature in Microsoft Windows XP files should  
be loaded from the IBM Monitor CD.  
1. Turn off the computer and all attached devices.  
2. Ensure that the monitor is connected correctly.  
3. Turn on the monitor and then the system unit. Allow the system to  
boot into Windows XP.  
4. Open the DISPLAY PROPERTIES window by clicking START, SETTINGS,  
CONTROL PANEL and then double - clicking on the DISPLAY icon.  
5. Click the SETTINGS tab.  
6. Click the ADVANCED button.  
7. Click the MONITOR tab.  
8. Click the PROPERTIES button.  
9. Click the DRIVER tab.  
10.Open the HARDWARE UPDATE WIZARD window by clicking on UPDATE  
DRIVER and then Click the NEXT button.  
11. Select the “Install from a list or Specific location(Advanced)” and then  
Click the NEXT button.  
12.Insert the IBM Monitor CD into the CD drive: and click the HAVE DISK  
button.  
13.Click OK.  
14.Ensure that the CD drive letter is selected.  
15.Choose IBM E74M monitor and Click OK. The files will be copied  
from the CD to your hard disk drive.  
16.Close all open windows and remove the CD.  
17.Restart the system.  
The system will automatically select the maximum refresh rate and  
corresponding Color Matching Profiles.  
A6  
Control Panel Functions  
Front Panel Controls  
Control  
Function  
Power Button  
Use this button to turn the monitor on or off.  
This Indicator lights up green when the monitor  
operates normally. If the monitor is in power saving  
mode, this indicator color changes to amber.  
Power Indicator  
MENU (or OSD)  
Button  
Use this button to enter or exit the on screen  
display.  
Use these buttons to choose or adjust items in  
the on screen display.  
Buttons  
SELECT (or SET)  
Button  
Use this button to enter a selection in the on  
screen display.  
Control  
Direct Access Function  
Buttons  
Buttons  
Bring up Contrast adjustment  
Bring up Brightness adjustment  
The Contrast and Brightness functions are also available in the  
On Screen Display (OSD) menu.  
A7  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
NOTE  
Allow the monitor to stabilize for at least 30 minutes before making image adjustments.  
To make adjustments in the On Screen Display, follow these steps:  
Press the MENU (or OSD) Button, then the main menu of the OSD  
appears.  
To access a control, use the  
or  
Buttons. When the icon you want  
becomes highlighted, press the SELECT (or SET) Button.  
Use the  
Buttons to adjust the item to the desired level.  
Accept the changes by pressing the SELECT (or SET) Button.  
Exit the OSD by pressing the MENU (or OSD) Button.  
A8  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
Main menu  
Sub menu  
Brightness  
Reference  
To adjust the brightness and  
contrast of the screen  
BRIGHTNESS/  
CONTRAST  
Contrast  
V Position  
H Position  
To adjust the position of the  
screen  
POSITION  
SIZE  
V Size  
H Size  
To adjust the size of the screen  
Tilt  
To adjust the shape of the screen  
Side Pincushion  
S Pincushion Balance  
Parallelogram  
Trapezoid  
SHAPE  
PRESET 6500K  
9300K  
To customize the color of the  
screen  
COLOR  
Temp  
R/G/B(User Color)  
Video Level  
Language  
OSD Time  
To customize the screen status  
for a user's operating environment  
SETUP  
Degauss  
Recall  
To improve the clarity and  
stability of the screen  
SPECIAL  
Reset  
Moire H Moire  
V Moire  
: Adjustable  
A9  
On Screen Display(OSD) Selection and Adjustment  
To adjust the brightness and contrast of the screen  
OSD Adjust  
Description  
Brightness  
To adjust the brightness of the screen.  
Contrast  
To adjust the contrast of the screen.  
To adjust the position of the screen  
OSD Adjust  
Description  
Vertical Position  
To move image up and down.  
Horizontal Position  
To move image left and right.  
To adjust the size of the screen  
OSD Adjust  
Description  
Vertical Size  
To adjust image height.  
Horizontal Size  
To adjust image width.  
A10  
On Screen Display(OSD) Selection and Adjustment  
To adjust the shape of the screen  
OSD Adjust  
Description  
Tilt  
To correct image rotation.  
Side Pincushion  
To correct a concave or convex bowing of  
the image.  
Side Pincushion Balance  
To correct the balance of both sides  
bowing.  
Parallelogram  
To correctly adjust the skew of the image.  
Trapezoid  
To correct geometric distortion.  
To customize the color of the screen  
OSD Adjust  
Description  
6500K/ 9300K  
PRESET  
TEMP  
Select the screen color.  
• 6500K: Slightly reddish white.  
• 9300K: Slightly bluish white.  
Select the screen temperature which you  
prefer among reddish or bluish or any color  
in between.  
RED  
GREEN  
BLUE  
Set your own color levels.  
A11  
On Screen Display(OSD) Selection and Adjustment  
To customize the screen status for a user's operating environment  
OSD Adjust  
Description  
VIDEO LEVEL This item is used to select the monitor's  
input signal level. The normal level used for  
most PCs is 0.7V.  
If the screen becomes suddenly washed-  
out or blurred, please select 1.0V and try  
again.  
LANGUAGE To choose the language in which the  
control names are displayed.  
OSD Menus are available in 11 languages:  
English, German, French, Spanish, Italian,  
Swedish, Finnish, Portuguese, Korean,  
Chinese and Russian.  
OSD TIME  
Set the OSD time, i.e. the length of time a  
menu will remain on-screen before it shuts  
off automatically. Adjust the time to 5, 10,  
20, 30 or 60 seconds.  
A12  
On Screen Display(OSD) Selection and Adjustment  
To improve the clarity and stability of the screen  
OSD Adjust  
Description  
DEGAUSS To manually demagnetize the screen to  
avoid showing incorrect images or colors.  
RECALL You can use this function to reload the  
modified parameters for screen display  
operation, as specified by the user after  
purchase: Position, Size, Side Pincushion,  
Side Pincushion Balance, Parallelogram,  
Trapezoid (These recalled options may differ  
depending on the mode selected: Preset,  
User, or New).  
If you dont want to recall the monitor to  
these modified settings, use the  
button  
to select CANCEL and then press the  
SELECT (or SET) button.  
RESET  
Return to all factory default settings except  
"LANGUAGE, BRIGHTNESS,  
CONTRAST": Tilt, Color 9300K, Video  
Level, OSD Time, Moire (These reset  
options may differ depending on the mode  
selected: Preset, User, or New).  
If you dont want to reset the monitor, use the  
button to select CANCEL and then  
press the SELECT (or SET) button.  
MOIRE  
This item allows you to reduce the degree of  
moire. (Moire is caused by interference  
Horizontal Scan Line with the periodical dot  
screen). It is normally OFF(H:0/V:0).  
The moire adjustments may affect the focus  
of the screen.  
Moire adjustments may shake slightly while  
the moire reduction function is on.  
A13  
Troubleshooting  
No image appears  
Is the power cord of the  
monitor connected?  
Check and see if the power cord is connected properly to  
the power outlet.  
Is the power indicator light  
on?  
Press the Power button.  
Is the power on and the  
power indicator green?  
Adjust the brightness and the contrast.  
Is the power indicator  
amber?  
If the monitor is in power saving mode, try moving the  
mouse or pressing any key on the keyboard to bring up  
the screen.  
Do you see an "OUT OF  
FREQUENCY" message  
on the screen?  
This message appears when the signal from the PC  
(video card) is out of horizontal or vertical frequency  
range of the monitor. See the 'Specifications' section of  
this manual and configure your monitor again.  
Do you see a "SELF  
DIAGNOSITICS" message  
on the screen?  
This message appears when the signal cable between  
your PC and your monitor is not connected. Check the  
signal cable and try again.  
The screen is flickering.  
Is the vertical frequency  
less than 70Hz or is your  
monitor set to the  
Set the vertical frequency to 72Hz or higher, and  
consult the video card user manual for instructions on  
converting to a non-interlaced mode.  
(You can set this option under the Display icon of the  
Control Panel.)  
interlaced mode?  
Do you have any  
magnetic material such  
as adapter, or high-  
voltage line near to your  
monitor?  
Remove magnetic sources, such as power  
adapters, speakers, or high-voltage lines, away from  
the monitor.  
Do you hear a "~ding"  
sound while the monitor  
is flickering?  
Use the normal degaussing function. This function  
clears the screen and reduces any screen blur that  
may occur due to the surrounding magnetic field. The  
screen may flicker for about 5 seconds, accompanied  
by a "~ding" sound.  
A14  
Troubleshooting  
The screen color is not normal.  
Do you see basic  
discoloration (16 colors)?  
Set the color depth to 256 colors or higher: use 'Control  
Panel' 'Display' 'Settings' 'Color Palette'  
Is the screen color unstable  
or monochrome?  
Check the connection of the signal cable.  
Do you see a partial  
blurring on the screen?  
This happens due to interference from surrounding  
magnetic fields, as created when speakers, steel  
structures, or high-voltage lines are placed near the  
monitor. Remove any such materials from the  
immediate vicinity and use the DEGAUSS icon on the  
screen adjustment menu to fix the screen.  
I see an after-image on the screen.  
Do you see the after-image  
even when you turn off  
the monitor?  
A premature aging of the monitor pixels may cause the  
prolonged display of a single image on the screen. Be  
sure to use a screen saver to maximize the service life of  
the monitor.  
I see waves on the screen.  
Do you see the wave  
directly on the screen?  
This occurs in inverse proportion to the screen focus,  
which can be caused by a particular frequency or video  
card. Brighten the screen and use the 'MOIRE' icon on  
the screen adjustment menu to adjust the screen.  
Have you installed the monitor driver?  
Have you installed the  
monitor driver?  
Be sure to install the monitor driver from the IBM Monitor  
CD that comes with your monitor.  
A15  
Specifications  
Picture Tube  
17 inches (16.0 inches viewable)  
90 degree deflection  
0.26mm diagonal, 0.23mm horizontal dot pitch  
AGARAS(Anti-Glare Anti-Reflective Anti-Static) coating  
Sync Input  
Horizontal Freq. 30 - 70kHz (Automatic)  
Vertical Freq.  
Input Form  
Signal Input  
50 - 160Hz (Automatic)  
Separate TTL, Positive/Negative  
15 pin D-Sub Connector  
Input Form  
Resolution(max) 1280 x 1024@60Hz  
Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive  
Video Input  
Plug&Play  
DDC 2B  
90 W  
5 W  
Normal  
Power Off  
Power  
Consumption  
Dimensions  
&Weight  
(with tilt/ swivel  
stand)  
Width  
Height  
Depth  
45.0 cm / 17.7 inches  
39.9 cm / 15.7 inches  
41.6 cm / 16.4 inches  
Net  
15.2 kg (33.51 lbs)  
Power Input  
AC 100-240V 50/60Hz 2.0A  
Environmental  
Conditions  
Operating Conditions  
Temperature  
Humidity  
0˚C to 40 ˚C  
10 % to 90 % non-Condensing  
Storage Conditions  
Temperature  
Humidity  
-20˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Tilt/Swivel Stand  
Signal cable  
Power cord  
Detached  
Attached  
Detached  
TCO95  
Regulations  
A16  
Specifications  
Preset Modes (Resolution)  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
9
31.47  
37.50  
43.27  
31.47  
37.93  
46.88  
53.68  
41.775  
60.02  
68.677  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
MFI  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
720 x 400  
800 x 600  
800 x 600  
960 x 529  
1024 x 768  
1024 x 768  
60  
75  
85  
70  
85  
75  
85  
75  
75  
85  
VESA  
VESA  
10  
A17  
Using the Audio Functions  
Side Jacks  
Headphone Jack  
Microphone Jack  
A headphone jack that automatically  
mutes the speaker volume when  
headphones plugged in.  
An external microphone can be used  
instead of the built-in microphone.  
Rear Panel Jacks  
Audio In -Sky Blue  
Connects to the *LINE OUT jack of the PC  
sound card.  
AUDIO  
IN  
MIC.  
OUT  
Mic Out - Pink  
Connects to the microphone jack of the  
PC sound card.  
Microphone Operation  
Using this jack reduces the length of cable needed to reach the PC's sound card.  
In order to use the MIC jack, use a cable to plug into the rear of the monitor (MIC  
OUT) and into the MIC input jack of your sound card (if available).  
*LINE OUT  
A terminal used to connect to the speaker including a built-in amplifier (Amp).  
Make sure that the connecting terminal of the PC sound card is checked before  
connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the  
PC volume.  
NOTE  
If the Audio Out of the PC supports both Speaker Out and Line Out, Please use  
the Line Out function (Refer to the PC Manual).  
A18  
Using the Audio Functions  
Front Panel Controls  
Control  
Function  
Audio Mute  
Use to mute audio source.  
Microphone  
Built-in microphone.  
Brings up to the audio menu.  
Buttons  
Buttons  
Use these buttons to choose or adjust items  
in the on screen display.  
To make adjustments in the On Screen Display, follow these steps:  
A19  
On Screen Display(OSD) Selection and Adjustment  
VOLUME  
70  
ON  
Main Menu  
Description  
Raises or lowers audio level.  
VOLUME  
Raises or lowers treble level.  
Raises or lowers bass level.  
TREBLE  
BASS  
Changes levels of left/right speaker.  
BALANCE  
Enables or disables microphone usage.  
MICROPHONE  
: Adjustable  
A20  
Audio Specifications  
Audio Specifications  
Audio  
RMS Audio Output 1W + 1W (Right + Left)  
Input Sensitivity 0.7 Vrms  
Speaker Impedance 8Ω  
Service Information  
The following parts are for use by IBM services, or IBM authorized  
dealers, to support customer warranty. Parts are for service use only.  
DESCRIPTION  
MODEL  
COLOR  
MACHINE  
TYPE  
PART  
NUMBER  
31P8102 E74M FRU MONITOR  
31P8103 E74M FRU - Tilt/Swivel  
31P8122 E74M FRU color coded  
audio cables  
6517  
6LN  
Stealth Black  
A21  

Magnavox CRT Television 50MF412B User Manual
Moffat Bakbar E31 User Manual
Multi Link TeleVoIP Stick User Manual
Panasonic WJ RT208 User Manual
Philips 22PDL49X6H User Manual
Philips 107C 55 User Manual
Philips Business 109B60 User Manual
Philips Computer Monitor 206V3L User Manual
Philips DVP3336 User Manual
Philips DVP5388K User Manual