IBM 6331 H1N User Manual

Kerr15_main_1.fm Page 2 Wednesday, September 5, 2001 6:16 PM  
Your New Monitor  
Connecting Your Monitor  
3
2
4
Turn off your computer and unplug the  
the power cord for your computer into a  
nearby outlet.  
1
2
power cord.  
Signal cable  
Connect the end of the signal cable to  
your computer’s video port (Video board,  
video card, or graphics card).  
Turn on your computer and monitor.  
If your monitor displays an image,  
installation is complete.  
5
6
Install monitor driver  
Insert the provided diskette into the A:  
drive, when prompted by the operating  
system.  
Power port  
Connect the power cord for your monitor  
to the power port on the back of the  
monitor.  
3
Power cords  
Plug the power cord for the monitor and  
4
English - 2  
Kerr15_main_1.fm Page 3 Wednesday, September 5, 2001 6:16 PM  
Your New Monitor  
Front Panel  
Button  
Description  
Power switch  
Switches the monitor on and off.  
- +  
Allow you to move around the on-screen  
display (OSD) menu and to make adjustments.  
Adjustment  
buttons  
Activates the On-Screen-Display / selects  
control icons / locks the OSD to prevent  
changes.  
OSD/Select  
Closes an active menu window and takes  
you to the previous level. If you are in the  
main level of the menu, pushing this button  
will turn off the menu.  
EXIT  
Important: Holding in this button for longer  
than 5 seconds erases all data in the User  
Settings memory.  
English - 3  
Kerr15_main_1.fm Page 4 Wednesday, September 5, 2001 6:16 PM  
Your New Monitor  
Direct Button Access  
Brightness and contrast can be adjusted as follows, without the need to display the  
OSD: Select the function and use the “  
-
“ and “  
+
“ buttons to adjust. If  
adjustment is not made within 15 seconds, the current settings will be saved and the  
control screen will disappear automatically.  
Icon  
Control  
Description  
-
BRIGHTNESS  
Adjusts the background brightness  
+
Adjusts the contrast between foreground and  
background  
CONTRAST  
English - 4  
Kerr15_pg4.fm Page 4 Thursday, October 11, 2001 1:14 AM  
Operation  
On Screen Display(OSD)  
Your monitor has an OSD, accessed by the buttons on the front of your monitor, that allows you to  
adjust characteristics of the screen image. Display changes are indicated by on-screen adjustment icons.  
Some functions have sub-menus.  
Push the menu button  
to display the main menu.  
1
2
3
Function icons are arranged across the top of the OSD.  
Push the or button to move through the icons.  
-
+
The name of the function will appear below the rows of function icons.  
To select a function or open a sub-menu, push the  
options for adjustment. If there is a sub-menu, use the  
button. The screen will display the  
or button to highlight the feature you  
-
+
want to adjust, then push the  
Use the and buttons to make adjustments. The  
decreases values. On-screen calibration numbers show the effect of your adjustment. If you are in  
button to select it.  
-
+
+
button increases values and the  
-
button  
4
5
a sub-menu, use the EXIT button  
to return to the previous menu.  
Push the EXIT button  
to exit and save your changes.  
Function icons  
Brightness  
Active function  
Adjustment icons  
:
:
Access Function  
Exit Menu  
Function selection  
and  
Menu navigation  
English - 4  
E54-4p.fm Page 5 Friday, January 5, 2001 11:02 AM  
Operation  
Icon  
Monitor Function Control  
Brightness  
Brightness  
Background brightness of screen.  
-– Decreases brightness  
+ Increases brightness  
:
Access Function  
Contrast  
Contrast  
Access Function  
H-Position  
Contrast of screen image.  
-– Decreases contrast  
+ Increases contrast  
:
Horizontal Position  
Horizontal screen position.  
-– Moves screen left  
+ Moves screen right  
:
Access Function  
Vertical Position  
V-Position  
Vertical screen position.  
-– Moves screen down  
+ Moves screen up  
:
Access Function  
Horizontal Size  
H-Size  
Horizontal screen size.  
-– Decreases size  
+ Increases size  
:
Access Function  
Vertical Size  
V-Size  
Vertical screen size.  
-– Decreases size  
+ Increases size  
Access Function  
:
English - 5  
E54-4p.fm Page 6 Friday, January 5, 2001 11:02 AM  
Operation  
Icon  
Monitor Function Control  
Pincushion  
Pincushion  
Straightens screen vertical edges.  
-– Curves image inward  
+ Curves image outward  
:
Access Function  
Geometry  
Trapezoid  
Width of top and bottom of screen.  
-– Widens bottom of screen  
+ Widens top of screen  
Geometry  
1.  
:
Access Function  
Parallelogram  
:
Exit Menu  
-– Skews screen image left  
+ Skews screen image right  
Trapezoid  
Rotation  
2.  
-– Rotates entire screen left  
+ Rotates entire screen right  
Select Function  
Previous Menu  
+ - :  
:
Pinbalance  
-– Curves vertical lines to left  
+ Curves vertical lines to right  
V-Linearity  
-– Compresses image at top of screen  
+ Compresses image at bottom of screen  
English - 6  
E54-4p.fm Page 7 Friday, January 5, 2001 11:02 AM  
Operation  
Icon  
Monitor Function Control  
Language  
Language  
1 2 3 4 5 6  
English  
-– and + scroll through on-screen  
language options.  
(English/ Deutsch/ Francais/ Italiano  
Brazilian Português/ Español)  
:
Access Function  
:
Exit Menu  
Advanced  
H- Moiré  
Advanced  
1.  
2.  
Corrects for on-screen moiré  
pattern.  
-– and + clear Horizontal Moiré  
:
:
Access Function  
Exit Menu  
H-MoirŽ  
V- Moiré  
Corrects for on-screen moiré  
pattern.  
-– and + clear Vertical Moiré  
Select Function  
Previous Menu  
+ - :  
:
Video Input Level  
Selects the video signal level  
-– Select 0.7 V  
+ Select 1.0 V  
Color Temperature  
-– 9300k more blue  
+ 6500k more red  
English - 7  
E54-4p.fm Page 8 Friday, January 5, 2001 11:02 AM  
Operation  
Icon  
Monitor Function Control  
Zoom  
Zoom  
-– Reduces view of display area  
+
Enlarges view of display area  
:
Access Function  
Degauss  
Removes color distortion caused by  
Degauss  
magnetic fields. Do not use more than  
once in 30 minutes.  
:
Access Function  
Recall  
Recall  
Returns monitor to original settings.  
-– No  
:
Access Function  
+
Yes  
Display Timing  
Display Timing  
Monitor display settings.  
-– Factory timing  
:
User Mode  
+
User timing  
OSD Lock/Unlock  
Allows you to secure the current control  
settings so that they cannot be  
inadvertently changed. You can unlock  
the OSD controls at any time by using  
the same procedure.  
OSD Lock/Unlock  
Control Lock  
Locked  
n
Push and hold the Menu (  
)
button for 10 seconds or more to Lock  
or to Unlock.  
English - 8  
E54-4p.fm Page 9 Friday, January 5, 2001 12:58 PM  
Troubleshooting  
Before calling for service, check the information in this section to see if you can solve the  
problem yourself.  
There is no screen image  
n
Check to see that both the monitor and the computer are plugged in and turned on.  
“No Connection, Check Signal Cable” appears  
Check the signal cable connection between the computer and the monitor.  
n
“Sync. Out of Range” appears  
n
The input signal frequency is over or under the synchronization range of the monitor, see  
“Specifications” section.  
The screen image is too light or too dark  
Adjust the brightness or contrast settings, see On Screen Display section.  
n
The screen image is too large or too small  
n
Adjust the size settings, see H-size and V-Size On Screen Display section.  
n
Adjust the Zoom setting, see On Screen Display section.  
The colors are distorted with dark or shadowed areas  
n
Activate the degauss feature, see On Screen Display section.  
n
Adjust the color temperature, see On Screen Display section.  
The power indicator light is blinking green  
The monitor is using its power management system, see “PowerSaver” section.  
n
You need the monitor driver software  
n
Download the driver from the internet at http: //www.ibm.com/support  
English - 9  
E54-4p.fm Page 10 Friday, January 5, 2001 11:02 AM  
Help & Service  
Machine Name -  
E54 Color Monitor (M/T 6331)  
Warranty Period - Three (3) Years  
See the IBM Statement of Limited Warranty included in this publication for IBM's warranty  
terms and conditions.  
The IBM Machine Warranty worldwide Web site at  
of IBM's Limited Warranty for IBM Machines, a Glossary of IBM definitions, Frequently  
Asked Questions (FAQs) and Support by Product (Machine) with links to Product Support  
pages. The IBM Statement of Limited Warranty is also available on this site in 29  
languages via pdf files.  
Service and support  
With the original purchase of an IBM machine, you have access to extensive support  
coverage. During the IBM machine warranty period, you may call IBM or your reseller for  
problem determination assistance under the terms of the IBM Statement of Limited  
Warranty. You may seek help as follows:  
Call IBM HelpCenter  
In the US call 1-800-772-2227  
In Canada (Toronto only) call 416-383-3344  
(all others) call 1-800-565-3344  
In other countries, contact your dealer, retailer, or other IBM authorized servicer. Before  
calling, please have available as much of the following information as possible:  
1. Type, model and serial number from the label on the back of your monitor.  
2. Purchase receipt.  
3. Description of problem.  
4. Computer type and model.  
5. System configuration (hardware fitted etc.).  
6. System BIOS version number.  
7. Operating System and version number.  
8. Display driver version number.  
If possible, stay by your computer system. Your technical support representative might want  
to go through the problem with you during the call.  
English - 10  
E54-4p.fm Page 11 Tuesday, January 16, 2001 2:19 PM  
PowerSaver  
This monitor has a built-in power management system called PowerSaver. This system saves  
energy by switching your monitor into a low-power mode when it has not been used for a  
certain amount of time. The monitor automatically returns to normal operation when you  
move the computer's mouse or press a key on the keyboard. For energy conservation, turn  
your monitor OFF when it is not needed, or when leaving it unattended for long periods.  
The PowerSaver system operates with a VESA DPMS compliant video card installed in your  
computer. Use a software utility installed on your computer to set up this feature.  
State  
Normal Operation  
Power-off Mode (EPA/ENERGY 2000)  
Power Indicator  
Green  
Green, Blinking (1 sec. interval)  
Power  
Consumption  
75 W (Maximum)  
61 W (Nominal)  
Less than 3 W  
NOTE: This monitor is EPA ENERGY STAR® compliant and ENERGY 2000 compliant when used with a  
computer equipped with VESA DPMS functionality.  
Display Modes  
Display Mode  
IBM, VGA2, 720 x 400  
Vertical Frequency (Hz)  
70  
60  
75  
85  
75  
85  
75  
85  
IBM, VGA3, 640 x 480  
VESA, 640 x 480  
VESA, 640 x 480  
VESA, 800 x 600  
VESA, 800 x 600  
VESA, 1024 x 768  
VESA, 1024 x 768  
English - 11  
E54-4p.fm Page 12 Tuesday, January 16, 2001 2:22 PM  
Specifications  
Specifications  
Model: IBM E54  
Picture Tube  
• 15” (38 cm) Full square type (35 cm Viewable)  
• 90° Deection  
• Dot pitch: 0.28 mm  
• Aluminized tri-color phosphor dot trio with black matrix.  
• Anti-doming invar shadow mask.  
Synchronization  
• Horizontal:  
Vertical:  
30 kHz to 70 kHz  
50 Hz to 120 Hz  
Display Color  
• Unlimited  
• 1280 Dots  
Maximum Resolution  
Active Display  
• 1024 Lines  
• Horizontal:  
Vertical:  
10.5 ± 0.16 inch (267.0 ± 4 mm)  
7.9 ± 0.16 inch (200.0 ± 4 mm)  
Input Signal,  
Terminated  
Analog:  
0.7 Vpp positive at 75 ohms  
Separate Sync.: TTL level, positive or negative  
Maximum Pixel Clock  
Power Supply  
• 110 MHz  
• AC 100-240 V ± 10% , 60 Hz / 50Hz ± 3Hz  
• 75 W (maximum)  
Power Consumption  
Dimensions/Weight  
(WxDxH)  
• Unit:  
• Carton:  
362 x 384 x 384 mm /12.9 kg  
454 x 497 x 445 mm /15.2 kg  
Environmental  
Considerations  
• Operating temperature:  
Humidity:  
41°F to 104°F (5°C to 40°C)  
10% to 80%  
• Storage temperature:  
Humidity:  
-4°F to 113°F (-20°C to 45°C)  
20% to 80%  
Design and specifications are subject to change without notice.  
English - 12  
Kerr74_54_compliance.fm Page 0 Wednesday, September 5, 2001 6:16 PM  
Compliances  
For units intended to be operated at 230 volts (outside  
Federal Communications  
Commision  
(FCC) Statement  
the U.S.): Use a cord set with a grounding type  
attachment plug rated 13 amperes (minimum), 250 volts.  
Use a cord set with a grounding type attachment plug.  
The cord set should have the appropriate safety  
approvals for the country in which the equipment will be  
installed.  
TestedTo Comply  
With FCCtSandard  
IBM power cords for a specific country or region are usually  
available only in that country or region.  
FOR HOME OR OFFICE USE  
This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses,  
and can radiate radio frequency energy and, if not installed  
and used in accordance with the instructions, may cause  
harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a  
particular installation.  
If this equipment does cause harmful interference to radio  
or television receptions, which can be determined by  
turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following  
measures:  
Using Countries or  
Regions  
IBM Fig. #  
IBM P/N  
(1.8M)  
(Plug Stnd.)  
US, Canada, Mexico,  
Brazil, Costa Rica, Peru,  
Colombia, Ecuador,  
Venezuela, Bolivia,  
Panama, El Salvador,  
Honduras, Nicaragua,  
Dominican Republic,  
Guatemala, Taiwan, Saudi  
Arabia, Thailand,  
4
(NEMA 5-15P) 6952301  
125V  
Phillipines, Japan  
!
!
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV  
technician for help.  
US, Canada, Mexico,  
Brazil, Costa Rica, Peru,  
Colombia, Ecuador,  
Venezuela, Bolivia,  
Panama, El Salvador,  
Honduras, Nicaragua,  
Dominican Republic,  
Guatemala, Taiwan, Saudi  
Arabia, Thailand,  
!
!
5
(NEMA 6-15P) 1838576  
250V  
Properly shielded and grounded cables and connectors  
must be used in order to meet FCC emission limits. Proper  
cables and connectors are available from IBM authorized  
dealers. IBM is not responsible for any radio or television  
interference caused by using other than recommended  
cables and connectors or by unauthorized changes or  
modifications to this equipment. Unauthorized changes or  
modifications could void the user's authority to operate the  
equipment.  
Phillipines, Japan  
6
13F9939  
Australia, New Zealand  
(AS/NZS C112)  
Power Cords  
For your safety, IBM provides a power cord with a  
grounded attachment plug to use with this IBM product.  
To avoid electrical shock, always use the power cord  
and plug with a properly grounded power outlet.  
IBM power cords used in the United States and Canada  
are listed by the Underwriters Laboratories (UL) and  
certified by the Canadian Standards Association (CSA).  
For units intended to be operated at 115 volts: Use a UL  
listed and  
CSA-certified cord set consisting of a minimum 18 AWG,  
type SVT or SJT, three conductor cord, a maximum of  
4.5 m (15 ft) in length and a parallel blade, grounding  
type attachment plug rated 15 amperes, 125 volts.  
For units intended to be operated at 230 volts (U.S.  
use): Use a UL-listed and CSA-certified cord set  
consisting of a minimum 18 AWG, type SVT or SJT,  
three conductor cord, a maximum of 4.5 m (15 ft) in  
length and a tandem blade, grounding type attachment  
plug rated 15 amperes, 250 volts.  
Kerr74_54_compliance.fm Page 1 Wednesday, September 5, 2001 6:16 PM  
25  
France, Germany,  
Sweden, Norway, Austria,  
Netherlands, Finland,  
Belgium, Bosnia, Croatia,  
Egypt, Greece, Hungary,  
Poland, Portugal, Romania,  
Slovenia, Spain, Sweden,  
Turkey, Iceland, Estonia,  
Lativa, Lithuania,  
14F0068  
36L8879  
Italy, Chile  
(CEI 23-16)  
Argentina, Uruguay,  
Paraguay  
2
(IRSM 2073)  
62  
02K0545  
14F0086  
China  
Israel  
(GB 2099.1)  
32  
(SI 32)  
Luxembourg, Andorra,  
Guadeloupe, French  
Guyana, Martinique,  
South Africa, India, Sri  
Lanka, Pakistan, Uganda,  
Lesotho, Nambia,  
Monaco, New Caledonia,  
Madagascar, Mauritius,  
Greece, Turkey, Portugal,  
Albania, Armenia,  
Azerbaidjan, Belarus,  
Bosnia, Crotia, Czech  
Republic, Georgia,  
22  
14F0014  
14F0050  
(SABS 164)  
Swaziland  
24  
Switzerland, Lichtenstein  
(1011-S24507)  
Hungary, Kazakhstan,  
Kyrhgistan, Macedonia,  
Moldavia, Poland,  
Romania, Serbia, Slovakia,  
Slovenia, Tajikistan,  
Industry Canada Class B emission  
compliance statement  
This Class B digital apparatus complies with Canadian  
ICES-003.  
18  
13F9978  
(CEE 7 - VII)  
Turkmenistan, Ukranine,  
Uzbekistan, Russia,  
Lebanaon, Syria, Egypt,  
Iran, Algeria, Benin, Cape  
Verde, Burkina Faso,  
Cameroon, Central African  
Republic, Chad, Congo  
(Republic of), Congo  
Cet appareil numérique de la classe B respecte toutes  
les exigences du Réglement sur le matériel brouilleur  
du Canada.  
Avis de conformité à la réglementation  
d'Industrie Canada  
(Democratic Republic of),  
Djibouti, Equatorial Guinea,  
Gabon, Guinea, Guinea  
Bissau, Ivory Coast, Mali,  
Mauritania, Morocco, Niger,  
Senegal, Togo, Tunisia,  
Angola, Burundi, Ethiopia,  
Mozambique, Rwanda,  
Somalia, Sao Tome,  
Cet appareil numérique de classe B est conforme à la  
norme  
NMB-003 du Canada.  
As an ENERGY STAR Partner, IBM  
Corporation has determined that  
this product meets the ENERGY  
STAR guidelines for energy  
efficiency.  
Eritrea, Mayotte, Comoros,  
Reunion, French  
Polynesia, Vanuatu, Wallis  
and Futuna, Korea,  
Vietnam, Indonesia  
MPRII  
UK, United Arab Emirate  
(Dubai), China (Hong Kong  
S.A.R.), Singapore,  
Malaysia, Ireland, Cyprus,  
Bahrain, Jordan, Kuwait,  
Oman, Quatar, Yemen,  
Gambia, Malta, Botswana,  
Seychelles, Nigeria,  
This product complies with Swedish National Council  
for Metrology (MPR) standards issued in December  
1990 (MPRII) for very low frequency (VLF) and  
extremely low frequency (ELF) emissions.  
23  
14F0032  
13F9996  
(BS 1363/A)  
Ghana, Kenya, Liberia,  
Malawi, Sierra Leone,  
Sudan, Tanzania, Zambia,  
Zimbabwe  
19  
(DK2-5a)  
Denmark  
Kerr54_svcinfo.fm Page 1 Wednesday, September 5, 2001 6:17 PM  
Service Information  
The following parts are for use by IBM service, or IBM authorized dealers, to  
support the customer warranty. Parts are for service use only.  
Model Type 6331  
31P6240  
31P6241  
31P6333  
31P6334  
6331-H1N  
6331-J1N  
Monitor - Pearl White, NH, MPR-II  
Monitor - Stealth Black, NH, MPR-II  
Tilt/Swivel-Pearl White  
Tilt/Swivel-Stealth Black  
IBM  
Monitor Safety and  
Warranty Information  
OPTIONS  
by IBM  
First Edition (July 2001)  
© Copyright International Business Machines Corporation 2001. All rights reserved.  
US Government Users Restricted Rights – Use, duplication or disclosure restricted by  
GSA ADP Schedule Contract with IBM Corp.  
Safety Information: Read first  
DANGER  
To avoid shock hazard:  
Do not remove the covers.  
Do not operate this product unless the stand is attached.  
Do not connect or disconnect this product during an electrical storm.  
The power cord plug must be connected to a properly wired and grounded power outlet.  
Any equipment to which this product will be attached must also be connected to properly wired and grounded  
power outlets.  
To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power  
outlet should be easily accessible.  
Handling:  
Your colour monitor is heavy, so handle it with care. If heavier than 18 Kg, IBM recommends that the monitor is  
moved or lifted by two people.  
DANGER  
Pour éviter les risques d’électrocution :  
Ne retirez pas les capots du moniteur.  
N’utilisez pas ce produit si le socle n’est pas fixé.  
Ne connectez, ni ne déconnectez ce produit pendant un orage.  
Le câble d’alimentation doit être connecté à une prise électrique correctement mise à la terre et en bon état de  
marche.  
Tout équipement auquel ce produit est relié doit être également connecté à une prise correctement mise à la  
terre et en bon état de marche.  
Pour isoler le moniteur de la source d’alimentation électrique, vous devez le débrancher de la prise électrique.  
Cette prise doit être facile d’accès  
Manutention :  
Votre moniteur couleurs est lourd et doit donc être manipulé avec soin. Si son poids dépasse 18 kg, IBM vous  
conseille de le déplacer ou de le porter à deux.  
GEFAHRENHINWEIS  
Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:  
Unter keinen Umständen die Abdeckungen abnehmen.  
Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.  
Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.  
Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose anzuschließen.  
Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß verdrahtete und  
geerdete Steckdose angeschlossen werden.  
Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose gezogen werden.  
Die Steckdose sollte leicht zugänglich sein.  
Handhabungshinweis:  
Ihr Farbbildschirm ist schwer, gehen Sie vorsichtig damit um. Wenn er schwerer als 18 kg ist, empfiehlt IBM, daß  
der Bildschirm von zwei Personen getragen bzw. gehoben wird.  
GEVAAR  
Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen:  
Verwijder in geen enkel geval de kap.  
Stel dit produkt alleen in werking als de voet is bevestigd.  
Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet van een contactdoos tijdens  
onweer.  
Het netsnoer moet worden aangesloten op een geaarde contactdoos met correcte bedrading.  
Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn aangesloten op een contactdoos met  
correcte bedrading.  
Om het beeldscherm te ontkoppelen van de netvoeding, dient u de stekker uit de contactdoos te trekken. De  
contactdoos dient goed toegankelijk te zijn.  
Verplaatsing:  
De kleurenmonitor is zwaar. Doe dus voorzichtig. Indien de monitor zwaarder is dan 18 kilo, raadt IBM aan de  
monitor door twee mensen te laten tillen.  
PELIGRO  
Para evitar riesgos de descargas eléctricas:  
No retire bajo ningún concepto las cubiertas.  
No maneje el monitor sin antes acoplar el soporte.  
No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta eléctrica.  
El cable de alimentación debe estar conectado a un enchufe debidamente cableado y con toma de tierra.  
Cualquier equipo al que se vaya a conectar este producto también debe estar conectado a tomas de  
alimentación cableadas y conectadas a tierra correctamente.  
Para aislar el monitor del suministro eléctrico, debe retirar el enchufe de la toma de alimentación. Esta toma  
deberá ser de fácil acceso.  
Movimentazione del monitor:  
Il monitor a colori è pesante, si consiglia quindi di maneggiarlo con attenzione. Se il monitor pesa oltre 18 kg,  
IBM raccomanda che il monitor venga mosso o sollevato da due persone.  
PERICOLO  
Per evitare il rischio di scariche elettriche:  
Non rimuovere nessuna parte del telaio.  
Non accendere il prodotto se il piedistallo non è stato montato.  
Non collegare o scollegare il prodotto nel corso di un temporale.  
La spina del cavo di alimentazione deve essere collegata ad una presa di corrente con messa a terra, installata  
in maniera appropriata.  
Le apparecchiature a cui il prodotto viene attaccato devono essere collegate a prese di corrente con messa a  
terra, installate in maniera appropriata.  
Per isolare il monitor dalla corrente elettrica, staccare la spina dalla presa di alimentazione, che deve essere  
facilmente accessibile.  
Manipulación:  
El monitor de color es pesado, por lo que debe manipularlo con cuidado. Si pesa más de 18 kg, IBM recomienda  
moverlo con la ayuda de dos personas.  
PERIGO  
Para evitar o perigo de choques eléctricos:  
Não retire as coberturas.  
Não utilize este produto antes de montar a base.  
Não ligue nem desligue este produto durante uma tempestade eléctrica.  
O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra.  
Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas devidamente ligadas à  
terra.  
Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada eléctrica. A  
tomada eléctrica deve ser de fácil acesso.  
Manuseio:  
Seu monitor colorido é pesado, então manuseie-o com cuidado. Se o peso for superior a 18 (dezoito) Kg., a IBM  
recomenda que o monitor seja movido ou carregado por duas pessoas.  
FARE  
Sådan undgår du elektrisk stød:  
Kabinettet må under ingen omstændigheder fjernes.  
Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.  
Undgå at tilslutte eller frakoble dette produkt i tordenvejr.  
Netledningen skal være tilsluttet en korrekt jordet stikkontakt med korrekt ledningsføring.  
Alt udstyr, som tilsluttes dette produkt, skal også være tilsluttet korrekt jordede stikkontakter med korrekt  
ledningsføring.  
For at isolere skærmen fra strømforsyningen, skal stikket tages ud af stikkontakten. Stikkontakten bør være let  
tilgængelig.  
Håndtering:  
Deres farveskærm er tung, så vær forsigtig, når De løfter den. Hvis skærmen vejer mere end 18 kg, anbefaler  
IBM, at den flyttes og løftes af to personer.  
FARE  
Slik unngår du fare for elektrisk støt:  
Ikke ta av dekslene.  
Ikke bruk produktet dersom sokkelen ikke er  
montert.  
Ikke koble produktet til eller fra under tordenvær.  
Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak.  
Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet strømuttak.  
For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør være lett  
tilgjengelig.  
Käsittely:  
Värinäyttö on painava, joten käsittele sitä varoen. Jos näyttö painaa enemmän kuin 18 kg, IBM suosittelee, että  
kaksi henkilöä siirtää tai nostaa sitä.  
Varning - livsfara  
För att undvika risk för elektriska stötar måste du tänka på följande:  
Ta inte bort några skyddskåpor.  
Använd inte den här produkten innan du har satt fast stativet.  
Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett eluttag under  
åskväder.  
Strömkabeln måste anslutas till ett felfritt och jordat uttag.  
All utrustning som den här produkten kopplas till måste också anslutas till felfria och jordade uttag.  
För att bryta strömmen till bildskärmen måste du dra ut kontakten. Vägguttaget bör vara lätt att komma åt.  
Hantering:  
Hantera din färgmonitor med försiktighet, den är tung. Ni bör vara två personer för att lyfta och flytta monitorn om  
den är tyngre än 18 kg.  
VAARA  
Sähköiskun vaaran välttämiseksi:  
Älä avaa laitteen kansia missään tilanteessa.  
Älä käytä laitetta, ellei jalustaa ole kiinnitetty.  
Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana.  
Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.  
Kaikki muutkin laitteet, joihin tämä tuote on liitetty, on kytkettävä asianmukaisesti johdotettuihin pistorasioihin.  
Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen verkkojohto pistorasiasta. Pistorasian  
pitäisi olla mahdollisimman lähellä näytintä ja vaivattomasti käsillä.  
Håndtering:  
Fargeskjermen din er tung, og må håndteres med varsomhet. Hvis den veier mer enn 18 kilo, anbefaler IBM at  
skjermen flyttes eller løftes av to personer.  
TEHLIKE  
Elektrik çarpmasý tehlikesinden kaçýnmak için:  
Kapaklarý çýkarmayýnýz.  
Bu cihazý kaidesine takýlý durumda deðilken çalýþtýrmayýnýz.  
Bu cihazý elektriksel fýrtýna sýrasýnda prize takmayýnýz veya prizden çýkarmayýnýz.  
Elektrik kablosunun fiþi, elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ bir prize takýlmalýdýr.  
Bu cihazýn baðlanacaðý diðer tüm cihazlar da elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ prize  
takýlmýþ olmalýdýr.  
Monitörün elektrikle baðlantýsýný kesmek için fiþini prizden çekmeniz gereklidir. Priz, kolayca eriþilebilecek bir yerde  
olmalýdýr.  
Kaldýrma  
Renklý monitörünüz aðýr olduðu icin kaldýrýrken dikkatli olunuz. IBM‚ monitörün aðýrlýðýnýn 18 kilogramdan fazla  
olmasý halinde iki kiþi tarafýndan taþýnmasýný veya kaldýrýlmasýný tavsiye etmektedir.  
OPREZ  
Da biste izbjegli opasnost od strujnog udara:  
Nemojte otvarati kucište uredaja.  
Nemojte upotrebljavati ovaj uredaj dok ne postavite postolje.  
Nemojte spajati i odspajati uredaj za vrijeme oluje.  
Naponski kabel mora biti prikljucen u odgovarajuce uzemljenu uticnicu.  
Bilo koja oprema na koju ce ovaj uredaj biti spojen takoder mora biti prikljucena u odgovarajuce uzemljenu  
uticnicu.  
Da biste iskljucili uredaj iz struje, iskopcajte utikac iz uticnice. Uticnica treba biti lako dostupna.  
Rukovanje:  
Vaš monitor je te ak, zato rukujte njime pa ljivo. IBM preporuca da ovaj monitor podi u ili pomicu dvije osobe.  
Warranty Information  
This contains the warranty period, warranty service information, and the IBM Statement of Limited Warranty.  
Warranty period  
Machine- IBM Color Monitors (E Series, G Series, P Series, and T Series models)  
Warranty period* - Three (3) years  
* Contact your place of purchase for warranty service information. Some IBM Machines are eligible  
for on-site warranty service depending on the country where service is performed.  
Help and Service Information  
worldwide overview of the IBM Limited Warranty for IBM Machines, a glossary of terms used in the Statement  
of Limited Warranty, Frequently Asked Questions (FAQ), and links to Product Support Web pages. The IBM  
Statement of Limited Warranty is available from this Web site in 29 languages in Portable Document Format  
(PDF).  
Online technical support  
Online technical support is available during the life of your product. Online assistance can be obtained through  
the Personal Computing Support Web site and the IBM Automated Fax System.  
Online technical support  
IBM Personal Computing Support  
Web site  
IBM Automated Fax System  
1-800-426-3395 (U.S. and Canada)  
During the warranty period, assistance for replacement or exchange of defective components is available. In  
addition, if your IBM option is installed in an IBM computer, you might be entitled to service at your location.  
Your technical support representative can help you determine the best alternative.  
Telephone technical support  
Installation and configuration support through the HelpCenter will be withdrawn or made available for a fee, at  
IBM’s discretion, 90 days after the option has been withdrawn from marketing. Additional support offerings,  
including step-by-step installation assistance, are available for a nominal fee.  
To assist the technical support representative, have available as much of the following information as possible:  
Option name  
Option number  
Proof of purchase  
Computer manufacturer, model, serial number (if IBM), and manual  
Exact wording of the error message (if any)  
Description of the problem  
Hardware and software configuration information for your system  
If possible, be at your computer. Your technical support representative might want to walk you through the prob-  
lem during the call.  
For the support telephone number and support hours by country, refer to the following table. If the number for  
your country or region is not listed, contact your IBM reseller or IBM marketing representative. Response time  
may vary depending on the number and nature of the calls received.  
Support 24 hours a day, 7 days a week  
Canada (Toronto only)  
Canada (all other)  
416-383-3344  
1-800-565-3344  
1-800-772-2227  
U.S.A. and Puerto Rico  
All other countries and regions  
port/, and click Support Phone List.  
IBM Statement of Limited Warranty  
Z125-4753-06 8/2000  
Part 1 - General Terms  
This Statement of Limited Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms. The  
terms of Part 2 replace or modify those of Part 1. The warranties provided by IBM in this Statement of Limited  
Warranty apply only to Machines you purchase for your use, and not for resale, from IBM or your reseller. The  
term "Machine" means an IBM machine, its features, conversions, upgrades, elements, or accessories, or any  
combination of them. The term "Machine" does not include any software programs, whether pre-loaded with the  
Machine, installed subsequently or otherwise. Unless IBM specifies otherwise, the following warranties apply  
only in the country where you acquire the Machine. Nothing in this Statement of Limited Warranty affects any  
statutory rights of consumers that cannot be waived or limited by contract. If you have any questions, contact  
IBM or your reseller.  
The IBM Warranty for Machines  
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2) conforms to IBM's  
Official Published Specifications ("Specifications"). The warranty period for a Machine is a specified, fixed  
period commencing on its Date of Installation. The date on your sales receipt is the Date of Installation unless  
IBM or your reseller informs you otherwise.  
If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to  
either 1) make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your  
place of purchase and your money will be refunded.  
Extent of Warranty  
The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident, modification,  
unsuitable physical or operating environment, improper maintenance by you, or failure caused by a product for  
which IBM is not responsible. The warranty is voided by removal or alteration of Machine or parts identification  
labels.  
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER  
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,  
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND  
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDIC-  
TION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF  
EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY  
NOT APPLY TO YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO  
THE WARRANTY PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD.  
Items Not Covered by Warranty  
IBM does not warrant uninterrupted or error-free operation of a Machine.  
Any technical or other support provided for a Machine under warranty, such as assistance via telephone with  
"how-to" questions and those regarding Machine set-up and installation, will be provided WITHOUT WAR-  
RANTIES OF ANY KIND.  
Warranty Service  
To obtain warranty service for a Machine, contact IBM or your reseller. If you do not register your Machine with  
IBM, you may be required to present proof of purchase.  
During the warranty period, IBM or your reseller, if approved by IBM to provide warranty service, provides  
without charge certain types of repair and exchange service to keep Machines in, or restore them to, conform-  
ance with their Specifications. IBM or your reseller will inform you of the available types of service for a  
Machine based on its country of installation. At its discretion, IBM or your reseller will 1) either repair or  
exchange the failing Machine and 2) provide the service either at your location or a service center. IBM or your  
reseller will also manage and install selected engineering changes that apply to the Machine.  
Some parts of IBM Machines are designated as Customer Replaceable Units (called "CRUs"), e.g., keyboards,  
memory, or hard disk drives. IBM ships CRUs to you for replacement by you. You must return all defective  
CRUs to IBM within 30 days of your receipt of the replacement CRU. You are responsible for downloading des-  
ignated Machine Code and Licensed Internal Code updates from an IBM Internet Web site or from other elec-  
tronic media, and following the instructions that IBM provides.  
When warranty service involves the exchange of a Machine or part, the item IBM or your reseller replaces  
becomes its property and the replacement becomes yours. You represent that all removed items are genuine and  
unaltered. The replacement may not be new, but will be in good working order and at least functionally equiva-  
lent to the item replaced. The replacement assumes the warranty service status of the replaced item. Many fea-  
tures, conversions, or upgrades involve the removal of parts and their return to IBM. A part that replaces a  
removed part will assume the warranty service status of the removed part.  
Before IBM or your reseller exchanges a Machine or part, you agree to remove all features, parts, options, alter-  
ations, and attachments not under warranty service.  
You also agree to  
1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange;  
2. obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own; and  
3. where applicable, before service is provided:  
a) follow the problem determination, problem analysis, and service request procedures that IBM or your  
reseller provides;  
b) secure all programs, data, and funds contained in a Machine;  
c)provide IBM or your reseller with sufficient, free, and safe access to your facilities to permit them to fulfill  
their obligations; and  
d) inform IBM or your reseller of changes in a Machine's location.  
IBM is responsible for loss of, or damage to, your Machine while it is 1) in IBM's possession or 2) in transit in  
those cases where IBM is responsible for the transportation charges.  
Neither IBM nor your reseller is responsible for any of your confidential, proprietary or personal information  
contained in a Machine which you return to IBM or your reseller for any reason. You should remove all such  
information from the Machine prior to its return.  
Limitation of Liability  
Circumstances may arise where, because of a default on IBM's part or other liability, you are entitled to recover  
damages from IBM. In each such instance, regardless of the basis on which you are entitled to claim damages  
from IBM (including fundamental breach, negligence, misrepresentation, or other contract or tort claim), except  
for any liability that cannot be waived or limited by applicable laws, IBM is liable for no more than  
1. damages for bodily injury (including death) and damage to real property and tangible personal property; and  
2. the amount of any other actual direct damages, up to the charges (if recurring, 12 months' charges apply) for  
the Machine that is subject of the claim. For purposes of this item, the term "Machine" includes Machine  
Code and Licensed Internal Code.  
This limit also applies to IBM's suppliers and your reseller. It is the maximum for which IBM, its suppliers,  
and your reseller are collectively responsible.  
UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING: 1) THIRD-  
PARTY CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE UNDER THE FIRST  
ITEM LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR 3) SPE-  
CIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL  
DAMAGES, LOST PROFITS OR LOST SAVINGS, EVEN IF IBM, ITS SUPPLIERS OR YOUR  
RESELLER IS INFORMED OF THEIR POSSIBILITY. SOME JURISDICTIONS DO NOT ALLOW  
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
Governing Law  
Both you and IBM consent to the application of the laws of the country in which you acquired the Machine to  
govern, interpret, and enforce all of your and IBM’s rights, duties, and obligations arising from, or relating in any  
manner to, the subject matter of this Agreement, without regard to conflict of law principles.  
Part 2 - Country-unique Terms  
AMERICAS  
BRAZIL  
Governing Law: The following is added after the first sentence:  
Any litigation arising from this Agreement will be settled exclusively by the court of Rio de Janeiro.  
NORTH AMERICA  
Warranty Service: The following is added to this Section:  
To obtain warranty service from IBM in Canada or the United States, call 1-800-IBM-SERV (426-7378).  
CANADA  
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first  
sentence:  
laws in the Province of Ontario.  
UNITED STATES  
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first  
sentence:  
laws of the State of New York.  
ASIA PACIFIC  
AUSTRALIA  
The IBM Warranty for Machines: The following paragraph is added to this Section:  
The warranties specified in this Section are in addition to any rights you may have under the Trade Practices Act  
1974 or other similar legislation and are only limited to the extent permitted by the applicable legislation.  
Limitation of Liability: The following is added to this Section:  
Where IBM is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other similar leg-  
islation, IBM's liability is limited to the repair or replacement of the goods or the supply of equivalent goods.  
Where that condition or warranty relates to right to sell, quiet possession or clear title, or the goods are of a kind  
ordinarily acquired for personal, domestic or household use or consumption, then none of the limitations in this  
paragraph apply.  
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first  
sentence:  
laws of the State or Territory.  
CAMBODIA, LAOS, AND VIETNAM  
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first  
sentence:  
laws of the State of New York.  
The following is added to this Section:  
Disputes and differences arising out of or in connection with this Agreement shall be finally settled by arbitration  
which shall be held in Singapore in accordance with the rules of the International Chamber of Commerce (ICC).  
The arbitrator or arbitrators designated in conformity with those rules shall have the power to rule on their own  
competence and on the validity of the Agreement to submit to arbitration. The arbitration award shall be final  
and binding for the parties without appeal and the arbitral award shall be in writing and set forth the findings of  
fact and the conclusions of law.  
All proceedings shall be conducted, including all documents presented in such proceedings, in the English lan-  
guage. The number of arbitrators shall be three, with each side to the dispute being entitled to appoint one arbi-  
trator.  
The two arbitrators appointed by the parties shall appoint a third arbitrator before proceeding upon the reference.  
The third arbitrator shall act as chairman of the proceedings. Vacancies in the post of chairman shall be filled by  
the president of the ICC. Other vacancies shall be filled by the respective nominating party. Proceedings shall  
continue from the stage they were at when the vacancy occurred.  
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other party  
appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator was validly and  
properly appointed.  
The English language version of this Agreement prevails over any other language version.  
HONG KONG AND MACAU  
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first  
sentence:  
laws of Hong Kong Special Administrative Region.  
INDIA  
Limitation of Liability: The following replaces items 1 and 2 of this Section:  
1. liability for bodily injury (including death) or damage to real property and tangible personal property will be  
limited to that caused by IBM's negligence;  
2. as to any other actual damage arising in any situation involving nonperformance by IBM pursuant to, or in  
any way related to the subject of this Statement of Limited Warranty, IBM's liability will be limited to the  
charge paid by you for the individual Machine that is the subject of the claim.  
JAPAN  
Governing Law: The following sentence is added to this Section:  
Any doubts concerning this Agreement will be initially resolved between us in good faith and in accordance with  
the principle of mutual trust.  
NEW ZEALAND  
The IBM Warranty for Machines: The following paragraph is added to this Section:  
The warranties specified in this Section are in addition to any rights you may have under the Consumer Guaran-  
tees Act 1993 or other legislation which cannot be excluded or limited. The Consumer Guarantees Act 1993 will  
not apply in respect of any goods which IBM provides, if you require the goods for the purposes of a business as  
defined in that Act.  
Limitation of Liability: The following is added to this Section:  
Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees Act  
1993, the limitations in this Section are subject to the limitations in that Act.  
PEOPLE'S REPUBLIC OF CHINA (PRC)  
Governing Law: The following replaces this Section:  
Both you and IBM consent to the application of the laws of the State of New York (except when local law  
requires otherwise) to govern, interpret, and enforce all your and IBM’s rights, duties, and obligations arising  
from, or relating in any manner to, the subject matter of this Agreement, without regard to conflict of law princi-  
ples.  
Any disputes arising from or in connection with this Agreement will first be resolved by friendly negotiations,  
failing which either of us has the right to submit the dispute to the China International Economic and Trade Arbi-  
tration Commission in Beijing, the PRC, for arbitration in accordance with its arbitration rules in force at the  
time. The arbitration tribunal will consist of three arbitrators. The language to be used therein will be English and  
Chinese. An arbitral award will be final and binding on all the parties, and will be enforceable under the Conven-  
tion on the Recognition and Enforcement of Foreign Arbitral Awards (1958).  
The arbitration fee will be borne by the losing party unless otherwise determined by the arbitral award.  
During the course of arbitration, this Agreement will continue to be performed except for the part which the par  
ties are disputing and which is undergoing arbitration.  
EUROPE, MIDDLE EAST, AFRICA (EMEA)  
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES:  
The terms of this Statement of Limited Warranty apply to Machines purchased from IBM or an IBM reseller.  
Warranty Service:  
If you purchase an IBM Machine in Austria, Belgium, Denmark, Estonia, Finland, France, Germany, Greece,  
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzer-  
land or United Kingdom, you may obtain warranty service for that Machine in any of those countries from either  
(1) an IBM reseller approved to perform warranty service or (2) from IBM. If you purchase an IBM Personal  
Computer Machine in Albania, Armenia, Belarus, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic,  
Georgia, Hungary, Kazakhstan, Kirghizia, Federal Republic of Yugoslavia, Former Yugoslav Republic of Mace-  
donia (FYROM), Moldova, Poland, Romania, Russia, Slovak Republic, Slovenia, or Ukraine, you may obtain  
warranty service for that Machine in any of those countries from either (1) an IBM reseller approved to perform  
warranty service or (2) from IBM.  
If you purchase an IBM Machine in a Middle Eastern or African country, you may obtain warranty service for  
that Machine from the IBM entity within the country of purchase, if that IBM entity provides warranty service in  
that country, or from an IBM reseller, approved by IBM to perform warranty service on that Machine in that  
country. Warranty service in Africa is available within 50 kilometers of an IBM authorized service provider.  
You are responsible for transportation costs for Machines located outside 50 kilometers of an IBM authorized  
service provider.  
Governing Law:  
The applicable laws that govern, interpret and enforce rights, duties, and obligations of each of us arising from,  
or relating in any manner to, the subject matter of this Statement, without regard to conflict of laws principles, as  
well as Country-unique terms and competent court for this Statement are those of the country in which the war-  
ranty service is being provided, except that in 1) Albania, Bosnia-Herzegovina, Bulgaria, Croatia, Hungary,  
Former Yugoslav Republic of Macedonia, Romania, Slovakia, Slovenia, Armenia, Azerbaijan, Belarus, Georgia,  
Kazakhstan, Kyrgyzstan, Moldova, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan, the laws of Aus-  
tria apply; 2) Estonia, Latvia, and Lithuania, the laws of Finland apply; 3) Algeria, Benin, Burkina Faso, Came-  
roon, Cape Verde, Central African Republic, Chad, Congo, Djibouti, Democratic Republic of Congo, Equatorial  
Guinea, France, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Mali, Mauritania, Morocco,  
Niger, Senegal, Togo, and Tunisia, this Agreement will be construed and the legal relations between the parties  
will be determined in accordance with the French laws and all disputes arising out of this Agreement or related to  
its violation or execution, including summary proceedings, will be settled exclusively by the Commercial Court  
of Paris; 4) Angola, Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya, Kuwait,  
Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda, Sao Tome, Saudi Arabia, Sierra  
Leone, Somalia, Tanzania, Uganda, United Arab Emirates, United Kingdom, West Bank/Gaza, Yemen, Zambia,  
and Zimbabwe, this Agreement will be governed by English Law and disputes relating to it will be submitted to  
the exclusive jurisdiction of the English courts; and 5) in Greece, Israel, Italy, Portugal, and Spain any legal  
claim arising out of this Statement will be brought before, and finally settled by, the competent court of Athens,  
Tel Aviv, Milan, Lisbon, and Madrid, respectively.  
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:  
AUSTRIA AND GERMANY  
The IBM Warranty for Machines: The following replaces the first sentence of the first paragraph of this Sec-  
tion:  
The warranty for an IBM Machine covers the functionality of the Machine for its normal use and the Machine's  
conformity to its Specifications.  
The following paragraphs are added to this Section:  
The minimum warranty period for Machines is six months. In case IBM or your reseller is unable to repair an  
IBM Machine, you can alternatively ask for a partial refund as far as justified by the reduced value of the unre-  
paired Machine or ask for a cancellation of the respective agreement for such Machine and get your money  
refunded.  
Extent of Warranty: The second paragraph does not apply.  
Warranty Service: The following is added to this Section:  
During the warranty period, transportation for delivery of the failing Machine to IBM will be at IBM's expense.  
Limitation of Liability: The following paragraph is added to this Section:  
The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages caused  
by IBM with fraud or gross negligence and for express warranty.  
The following sentence is added to the end of item 2:  
IBM’s liability under this item is limited to the violation of essential contractual terms in cases of ordinary negli-  
gence.  
EGYPT  
Limitation of Liability: The following replaces item 2 in this Section:  
as to any other actual direct damages, IBM's liability will be limited to the total amount you paid for the Machine  
that is the subject of the claim. For purposes of this item, the term "Machine" includes Machine Code and  
Licensed Internal Code.  
Applicability of suppliers and resellers (unchanged).  
FRANCE  
Limitation of Liability: The following replaces the second sentence of the first paragraph of this Section:  
In such instances, regardless of the basis on which you are entitled to claim damages from IBM, IBM is liable for  
no more than: (items 1 and 2 unchanged).  
IRELAND  
Extent of Warranty: The following is added to this Section:  
Except as expressly provided in these terms and conditions, all statutory conditions, including all warranties  
implied, but without prejudice to the generality of the foregoing all warranties implied by the Sale of Goods Act  
1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded.  
Limitation of Liability: The following replaces items one and two of the first paragraph of this Section:  
1. death or personal injury or physical damage to your real property solely caused by IBM's negligence; and  
2. the amount of any other actual direct damages, up to 125 percent of the charges (if recurring, the 12 months'  
charges apply) for the Machine that is the subject of the claim or which otherwise gives rise to the claim.  
Applicability of suppliers and resellers (unchanged).  
The following paragraph is added at the end of this Section:  
IBM's entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be lim-  
ited to damages.  
ITALY  
Limitation of Liability: The following replaces the second sentence in the first paragraph:  
In each such instance unless otherwise provided by mandatory law, IBM is liable for no more than:  
1. (unchanged)  
2. as to any other actual damage arising in all situations involving nonperformance by IBM pursuant to, or in any  
way related to the subject matter of this Statement of Warranty, IBM's liability, will be limited to the total  
amount you paid for the Machine that is the subject of the claim.  
Applicability of suppliers and resellers (unchanged).  
The following replaces the third paragraph of this Section:  
Unless otherwise provided by mandatory law, IBM and your reseller are not liable for any of the following:  
(items 1 and 2 unchanged) 3) indirect damages, even if IBM or your reseller is informed of their possibility.  
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND  
Limitation of Liability: The following is added to this Section:  
IBM's entire liability to you for actual damages arising in all situations involving nonperformance by IBM in  
respect of the subject matter of this Statement of Warranty will be limited to the charge paid by you for the indi-  
vidual Machine that is the subject of your claim from IBM.  
UNITED KINGDOM  
Limitation of Liability: The following replaces items 1 and 2 of the first paragraph of this Section:  
1. death or personal injury or physical damage to your real property solely caused by IBM's negligence;  
2. the amount of any other actual direct damages or loss, up to 125 percent of the charges (if recurring, the 12  
months' charges apply) for the Machine that is the subject of the claim or which otherwise gives rise to the  
claim;  
The following item is added to this paragraph:  
3. breach of IBM's obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of the Supply  
of Goods and Services Act 1982.  
Applicability of suppliers and resellers (unchanged).  
The following is added to the end of this Section:  
IBM's entire liability and your sole remedy, whether in contract or in tort, in respect of any default shall be lim-  
ited to damages.  
Part Number:  
22P4803  
Printed in the USA  
22P4803  
0422P4803  

IBM All in One Super7 Single Board Computer PCM 5896 User Manual
JVC GD 42X1 User Manual
JVC HV 36P38SUE HV 32P37SUE HV 28P37SUE User Manual
Miele Cooktop KM 191 User Manual
Motorola L302 User Manual
Moxa Technologies THINKCORE W341 User Manual
NEC MultiSync L227HR User Manual
Philips 14PT1347 User Manual
Philips 150V5FG User Manual
Philips DVD Player DV29 User Manual