Hanns G JW197D User Manual

JW197D  
User’s Manual  
TCO’99  
Congratulations!  
You have just purchased a TCO’99 approved and labelled product! Your choice has provided you  
with a product developed for professional use. Your purchase has also contributed to reducing the  
burden on the environment and also to the further development of environmentally adapted  
electronics products.  
Why do we have environmentally labelled computers?  
In many countries, environmental labelling has become an established method for encouraging the  
adaptation of goods and services to the environment. With the growing manufacture and usage of  
electronic equipment throughout the world, there is a recognized concern for the materials and  
substances used by electronic products with regards to their eventual recycling and disposal. By  
proper selection of these materials and substances, the impact on the environment can be minimized.  
There are also other characteristics of a computer, such as energy consumption levels, that are  
important from the viewpoints of both the work (internal) and natural (external) environments.  
Electronic equipment in offices is often left running continuously, resulting in unnecessary  
consumption of large amounts of energy and additional power generation. From the standpoint of  
carbon dioxide emissions alone, it is vital to save energy.  
What does labelling involve?  
The product meets the requirements for the TCO’99 scheme which provides for international and  
environmental labelling of personal computers and/or displays. The labelling scheme was developed  
as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska  
Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens  
Energimyndighet (The Swedish National Energy Administration).  
Approval requirements cover a wide range of issues: ecology, ergonomics, emission of electrical and  
magnetical fields, energy consumption and electrical safety.  
Ecological criteria impose restrictions on the presence and use of heavy metals, brominated and  
chlorinated flame retardants, and other substances. The product must be prepared for recycling and  
the manufacturing site(s) shall be certified according to ISO14001 or EMAS registered.  
Energy requirements include a demand that the system unit and/or display, after a certain period of  
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of  
time to reactivate the system unit shall be reasonable for the user.  
Labelled products must meet strict environmental demands, for example, in respect of the reduction  
of electrical and magnetical fields as well as work load and visual ergonomics.  
3
User’s Manual  
Below you will find a brief summary of the ecological requirements met by this product. The  
complete ecological criteria document can be found at TCO Development’s website  
TCO Development  
SE-114 94 STOCKHOLM, Sweden  
Fax: +46 8 782 92 07  
Information regarding TCO’99 approved and labelled products may also be obtained at  
Ecological requirements  
Flame retardants  
Flame retardants may be present in printed wiring board laminates, cables, and housings. Their  
purpose is to prevent, or at least to delay the spread of fire. Up to 30% by weight of the plastic in a  
computer casing can consist of flame retardant substances. Many flame retardants contain bromine or  
chlorine, and these flame retardants are chemically related to PCBs (polychlorinated biphenyls).  
Both the flame retardants containing bromine or chlorine and the PCBs are suspected of giving rise  
to health effects, including reproductive damage in fish-eating birds and mammals, due to the  
bio-accumulative* processes when not disposed of in accordance with strict standards for disposal.  
TCO’99 requires that plastic components weighing more than 25 grams shall not contain flame  
retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed  
wiring board laminates due to the lack of commercially available alternatives.  
Cadmium**  
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer  
displays. TCO’99 requires that batteries, the colour-generating layers of display screens, and the  
electrical or electronics components shall not contain any cadmium.  
Mercury**  
Mercury is sometimes found in batteries, relays and switches. TCO’99 requires that batteries shall  
not contain any mercury. It also demands that mercury is not present in any of the electrical or  
electronics components associated with the labelled unit. There is however one exception. Mercury is,  
for the time being, permitted in the back light system of flat panel monitors as there today is no  
commercially available alternative. TCO aims on removing this exception when a mercury free  
alternative is available.  
Lead**  
Lead can be found in picture tubes, display screens, solders and capacitors. TCO’99 permits the use  
of lead due to the lack of commercially available alternatives, but in future requirements TCO  
Development aims at restricting the use of lead.  
_____________________________  
* Bio-accumulative is defined as substances which accumulate in living organisms.  
**Lead, Cadmium and Mercury are heavy metals which are bio-accumulative.  
The display unit is an electric device which may contain hazardous materials/ components and that is  
needs to be taken care of at end of life according to following information /procedure:  
4
User’s Manual  
RECYCLING INFORMATION  
We, the Hanns.G care very much about our environment protection strategy and firmly believe that  
it helps us have healthier earth via appropriate treatment and recycling of industrial technology  
devices at the end-of-life.  
These devices contain recyclable materials, which can be re-decomposed and re-integrated into  
brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned  
substances. We strongly encourage you to contact the provided information to recycle this product.  
For more information, please visit  
5
User’s Manual  
TABLE OF CONTENTS  
6
User’s Manual  
SAFETY NOTICE  
1. The changes or modifications not expressly approved by the party responsible for compliance  
could void the user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the  
emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized  
modification to this equipment. It is the responsibilities of the user to correct such interference.  
WARNING:  
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high  
voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified  
personnel only.  
PRECAUTIONS  
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub,  
swimming pool or in a wet basement.  
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a  
person and cause serious damage to the appliance. Use only a cart or stand recommended by the  
manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a  
mounting kit approved by the manufacturer and follow the kit instructions.  
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure  
reliable operation of the monitor and to protect it from overheating, be sure these openings are not  
blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place  
the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or  
cabinet unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated on the label. If you  
are not sure of the type of power supplied to your home, consult your dealer or local power  
company.  
Unplug the unit during a lighting storm or when it will not be used for long period of time. This  
will protect the monitor from damage due to power surges.  
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.  
Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a  
fire or electric shock. Never spill liquids on the monitor.  
Do not attempt to service the monitor by yourself; opening or removing covers can expose you to  
dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.  
The wall socket shall be installed near the equipment and shall be easily accessible.  
7
 
User’s Manual  
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitor and do not indicate a problem.  
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the  
Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.  
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or  
less such as a missing pixel or a pixel lit all of the time.  
Due to the nature of the LCD screen, an afterimage of the previous screen may remain after  
switching the image, when the same image is displayed for hours. In this case, the screen is  
recovered slowly by changing the image or turning off the Power Switch for hours.  
If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or  
service center for repair. Do not attempt to repair the monitor yourself.  
Lamp Disposal  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR  
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE  
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.  
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.  
8
 
User’s Manual  
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
19” Wide screen TFT Color LCD Monitor  
Crisp, Clear Display for Windows  
Recommended Resolutions: 1440 X 900 @60Hz  
EPA ENERGY STAR®  
Ergonomic Design  
Space Saving, Compact Case Design  
CHECKING THE CONTENTS OF THE PACKAGE  
The product package should include the following items:  
LCD Monitor  
Screen  
Base  
Cables and User manual  
DVI-D Cable  
(dual input mode optional)  
Power Cord  
VGA Cable  
User’s manual  
Warranty card  
Audio Cable  
9
 
User’s Manual  
INSTALLATION INSTRUCTIONS  
INSTALL  
REMOVE  
Figure.1. Installing and Removing the Base  
INSTALLATION:  
1. Align the monitor with the opening in the base.  
2. Note that the longer section of the base points forward.  
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected  
correctly.  
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and  
making sure that the clips are fully engaged in the base.  
REMOVAL:  
1. Flip over the monitor so that it is upside down.  
2. Press the 2 clips on the base that holds the monitor in place.  
3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are  
unattached.  
POWER  
POWER SOURCE:  
1. Make sure that the power cord is the correct type required in your area.  
2. This LCD monitor has an Internal universal power supply that allows operation in either  
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)  
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other end to  
wall-outlet.  
10  
 
User’s Manual  
MAKING CONNECTIONS  
CONNECTING TO A PC  
Turn off your computer before performing the procedure below.  
1. Connect one end of the VGA cable to the back of the monitor and connect the other end to the  
computer’s D-Sub port.  
2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and  
connect the other end to the computer’s DVI-D port.  
3. Connect the audio cable between the monitor's audio input and the PC's audio output (green  
port).  
4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to  
Wall outlet.  
5. Turn on your monitor and computer.  
Figure.2. Connecting to a PC  
1.  
3.  
Power AC Input  
DVI-D Input  
2.  
4.  
Audio Input  
VGA Input  
11  
 
User’s Manual  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the full face of the monitor, then adjust the  
monitor’s angle to your own preference.  
Hold the stand so you do not topple the monitor when you change the monitor’s angle.  
You are able to adjust the monitor’s angle from -5° to 20°.  
Monitor Angle  
Figure.3.  
NOTES:  
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD  
screen.  
Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise  
pinching can result.  
12  
 
User’s Manual  
OPERATING INSTRUCTIONS  
GENERAL INSTRUCTIONS  
Press the power button to turn the monitor on or off. The other control buttons are located on the  
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to  
your personal preferences.  
The power cord should be connected.  
Connect the Signal cable from the monitor to the VGA card.  
Press the power button to turn on the monitor. The power indicator will light up.  
Figure.4. Control Panel Buttons  
CONTROL PANEL BUTTONS:  
1.  
3.  
5.  
Volume adjustment button / [-]  
Menu / Return  
2.  
4.  
6.  
Brightness adjustment button /[+]  
Input source change / Enter  
Power Indicator  
Power Button  
13  
 
User’s Manual  
FRONT PANEL CONTROL  
Power Button:  
Press this button to switch ON/OFF of monitor’s power.  
Power Indicator:  
Green — Power On mode.  
Orange — Power Saving mode.  
MENU / RETURN:  
1. Turn the OSD menu on/off or return to the previous menu.  
2. Exit OSD menu when in volume OSD status.  
Adjust ◄►:  
1. Adjust Brightness and volume when the OSD is off.  
2. Navigate through adjustment icons when OSD is ON or adjust a function when function is  
activated.  
A Button:  
1. Press the A button to select the input signal type. (There are VGA, DVI, HDMI, YpbPr options  
available but what port you can actually select depends on your model.)  
2. The OSD menu is used as “confirmation” function during start-up.  
3. Press and hold this button more than 3 seconds will start Auto Adjustfunction when using  
VGA input only. (The auto adjustment function is used to optimize the horizontal position,  
vertical position,clock,and phase.)  
NOTES:  
Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a  
place subject to direct sunlight, or excessive dust or mechanical vibration or shock.  
Save the original shipping box and packing materials, as they will come in handy if you ever have  
to ship your monitor.  
For maximum protection, repackage your monitor as it was originally packed at the factory.  
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be  
removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents  
such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety  
precaution, always unplug the monitor before cleaning it.  
14  
 
User’s Manual  
HOW TO ADJUST A SETTINGS  
BRIGHTNESS/CONTRAST  
Adjust the brightness value of the display according to your  
preference. SelectBRIGHTNESSoption to adjust the  
brightness value.  
BRIGHTNESS  
CONTRAST  
Adjust the contrast value of the display according to your  
preference. SelectCONTRASToption to adjust the contrast  
value.  
Optimal setting for high contrast images or videos. The dark and  
light areas of the image are automatically detected, and the  
contrast is enhanced to provide a clearer, sharper image. Also,  
you may select theX-CONTRASToption.  
X-CONTRAST  
INPUT SETTING  
INPUT SETTING  
Select theINPUT SETTINGoption to change between analog  
(VGA) or Digital (DVI) source. Enter the option and select  
Analog or Digital. [Dual input mode optional]  
From the Signal Selection menu, select the AUTO SEARCH」  
option to activate or deactivate the automatic signal search  
function. [For DVI/ HDMI Input only]  
AUTO SEARCH  
COLOR SETTING  
WARM  
NATURE  
COOL  
Adjust the color temperature value of the display according to  
your preference: WARM / NATURE/ COOL.  
Move the cursor to the User option and select it,  
To adjust the red, enter theRoption and adjust the level.  
To adjust the green, enter theGoption and adjust the level.  
To adjust the blue, enter theBoption and adjust the level.  
USER  
IMAGE SETTING  
AUTO ADJUST  
The auto adjustment function is used to optimize thehorizontal  
position, vertical position,clock,and phase. [For  
VGA Input only]  
When the aspect ratio of screen is distorted, you may make  
adjustments by using this function. “FULL” indicates full screen  
display, which does not ensure the image is shown as is or in  
initial scale. “FIT” indicates scaling by the proportion of original  
images, which may cause the screen showing black bands. [The  
availability of this function depends upon the selected model]  
ASPECT RATIO  
15  
 
User’s Manual  
Select theH-POSITIONoption to shift the screen image to the  
left or right. Enter the option and adjust the level. [For VGA  
only]  
H-POSITION  
V-POSITION  
CLOCK  
Select the V-POSITIONoption to shift the screen image up or  
down. Enter the option and adjust the level. [For VGA only]  
Select the CLOCKoption to reduce the vertical flicker of  
characters on the screen. Enter the option and adjust the level.  
[For VGA only]  
Select thePHASEoption to reduce the horizontal flicker of  
characters on the screen. Enter the option and adjust the level.  
[For VGA only]  
PHASE  
Select theSHARPNESSoption to adjust the sharpness of the  
display. Set the value from -2 to 2.  
SHARPNESS  
Transferring audio-video image by HDMI port would  
cause edges of the image being cut on the screen; selectPC  
Modeto display in full screen. Enter the option and select  
VIDEO Mode(VIDEO) or PC Mode(PC). [For HDMI  
Input only]  
HDMI MODE  
OSD SETTING  
LANGUAGE  
Select LANGUAGEoption to change the language of the  
OSD. Enter the option and select a language. [Reference only,  
the OSD Language depends on the selected model]  
SelectH-POSITIONoption to adjust the horizontal position of  
the OSD. Enter the option and adjust the level.  
H-POSITION  
Select V-POSITIONoption to adjust the vertical position of  
the OSD. Enter the option and adjust the level.  
V-POSITION  
SelectTRANSPARENCYoption to adjust the transparency of  
the OSD. Enter the option and adjust the level.  
TRANSPARENCY  
OSD TIME-OUT  
Select OSD TIME-OUToption to set the OSD time out from  
10 to 100 seconds. Enter the option and adjust the level.  
To choose the color combination of the OSD window, select  
OSD COLORoption under OSD SETTINGmenu, choose  
modes 1/2/3.  
OSD COLOR  
SYSTEM  
While transferring via the HDMI port, it is recommended to set  
AUDIO INPUT to HDMI; if no sound is outputted, it is  
AUDIO INPUT  
16  
User’s Manual  
recommended to select AUDIO INPUT as PC, and make sure the  
PC audio output cable is connected to monitor’s LINE IN (or  
AUDIO IN) port. [For HDMI Input only]  
Select theVOLUMEoption to change the volume level. Enter  
the option and adjust the level.  
VOLUME  
MUTE  
Select theMUTEoption to switch the function On or Off.  
Select the DDC/CIoption to switch the function On or Off.  
[Dual input mode optional]  
DDC/CI  
Select the FACTORY RESEToption to reset to the monitor’s  
default setting. This will erase the current settings. Enter the  
option and select On or Off.  
FACTORY RESET  
INFORMATION  
Display Horizontal frequency/Vertical frequency/Resolution  
information.  
17  
User’s Manual  
PLUG AND PLAY  
Plug & Play DDC2B Feature  
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD.  
It allows the monitor to inform the host system of its identity and, depending on the level of DDC  
used, communicate additional information about its display capabilities. The DDC2B is a  
bidirectional data channel based on the I²C protocol. The host can request EDID information over the  
DDC2B channel.  
THIS MONITOR WILLAPPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO  
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE  
MUST BE A VIDEO INPUT SIGNAL.  
This monitor meets the Green monitor standards as set by the Video Electronics Standards  
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The  
Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy  
by reducing power consumption when there is no video-input signal present. When there is no video  
input signal this monitor, following a time-out period, will automatically switch to power saving  
mode. This reduces the monitor's internal power supply consumption. After the video input signal is  
restored, full power is restored and the display is automatically redrawn. The appearance is similar to  
a "Screen Saver" feature except the display is completely off. The display is restored by pressing a  
key on the keyboard, or clicking the mouse.  
18  
 
User’s Manual  
TECHNICAL SUPPORT (FAQ)  
Q & A FOR GENERAL PROBLEMS  
PROBLEM & QUESTION  
Power LED is not on  
POSSIBLE SOLUTION  
*Check if the Power Switch is in the ON position.  
*Power Cord should be connected.  
*Check if the PC system is Plug & Play compatible.  
*Check if the Video Card is Plug & Play compatible.  
*Check if any plug pins on the VGA or DVI connector are  
bent.  
No Plug & Play  
The display is too dark or too  
bright.  
*Adjust the Contrast and Brightness Controls.  
Picture bounces or a wave  
pattern is present in the picture  
*Move electrical devices that may cause electrical  
interference.  
*Computer Power Switch should be in the ON position.  
*Computer Video Card should be snugly seated in its slot.  
*Make sure monitor’s video cable is properly connected to the  
computer.  
*Inspect monitor’s video cable and make sure none of the pins  
are bent.  
The power LED is ON (orange)  
but there’s no video or no  
picture.  
*Make sure computer is operational by hitting the CAPS  
LOCK key on the keyboard while observing the CAPS  
LOCK LED. The LED should either turn ON or OFF after  
hitting the CAPS LOCK key.  
Missing one of the primary  
colors (RED, GREEN, or  
BLUE)  
*Inspect the monitor’s video cable and make sure that none of  
the pins are bent.  
Screen image is not centered or  
sized properly.  
* Adjust pixel frequency CLOCK and PHASE or press hot-key  
(A Button)  
Picture has color defects  
(white does not look white)  
*Adjust RGB color or select color temperature.  
*Use win 2000/ME/XP Right click anywhere on desktop and  
select Properties>Settings>Screen Resolution. Use the  
silder to adjust the reslution and click Apply.  
The screen resolution needs to  
be adjusted  
No sound is outputted from  
monitor’s built-in speaker  
*Make sure PC audio output cable is connected to screens  
LINE IN port (or AUDIO IN port).  
*Make sure the sound volume adjustment can be clearly  
identified.  
*Make sure the System > Silence option in the monitor menu  
is on.  
*While transferring via HDMI port but no sound is outputted,  
it is recommended to select AUDIO INPUT as a PC option,  
19  
 
User’s Manual  
and make sure PC audio output cable is connected to  
monitors LINE IN port(or AUDIO IN port). [For HDMI  
Input only]  
20  
User’s Manual  
ERROR MESSAGE & POSSIBLE SOLUTIONS  
CABLE NOT CONNECTED :  
1. Check that the signal-cable is properly connected, If the connector is loose, tighten the  
connector’s screws.  
2. Check the signal-cable’s connection pins for damage.  
INPUT NOT SUPPORT :  
Your computer has been set to unsuitable display mode, set the computer to display mode given  
in the following table.  
FACTORY PRESET TIMING TABLE:  
HORIZONTAL  
FREQUENCY (KHz)  
31.469  
VERTICAL  
FREQUENCY (Hz)  
70.087  
MODE  
RESOLUTION  
1
2
720×400 @70Hz  
640×480 @60Hz  
640×480 @67Hz  
640×480 @75Hz  
800×600 @56Hz  
800×600 @60Hz  
800×600 @72Hz  
800×600 @75Hz  
832×624 @75Hz  
848×480 @60Hz  
1024×768 @60Hz  
1024×768 @70Hz  
1024×768 @75Hz  
1280×720 @60Hz  
1280×960 @60Hz  
1280×768 @60Hz  
1280×768 @75Hz  
1280×1024 @60Hz  
1280×1024 @75Hz  
1360×768 @60Hz  
1440×900 @60Hz  
1440×900 @75Hz  
31.469  
35.000  
37.500  
35.156  
37.879  
48.077  
46.875  
49.725  
37.879  
48.363  
56.476  
60.023  
45.000  
60.000  
47.776  
60.776  
63.981  
79.976  
63.981  
64.981  
66.981  
59.940  
66.667  
75.000  
56.250  
60.317  
72.188  
75.000  
75.000  
60.132  
60.004  
70.069  
75.029  
60.000  
60.000  
59.870  
75.070  
60.020  
75.025  
60.020  
60.050  
75.070  
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
21  
 
User’s Manual  
APPENDIX  
SPECIFICATIONS  
Driving system  
Size  
TFT Color LCD  
19.0"  
LCD Panel  
Video  
Pixel pitch  
H-Frequency  
V-Frequency  
0.2835mm(H) x 0.2835mm(V)  
30KHz – 80KHz  
55 – 75Hz  
Display Colors  
Max. Resolution  
Plug & Play  
16.2M Colors  
1440 x 900 @75Hz  
VESA DDC2BTM  
42W  
ON Mode  
EPA ENERGY STAR®  
Power Saving Mode  
OFF Mode  
1W  
1W  
Audio output  
Rated Power 1.0W rms (Per channel)  
VGA  
DVI  
Input Terminal  
Hor. : 428mm  
Ver. : 278mm  
Maximum Screen Size  
Power Source  
100~240VAC,50±3Hz,60±3Hz  
Operating Temp: 0° to 50°C  
Storage Temp.: -20° to 60°C  
Operating Humidity: 10% to 80%  
Environmental  
Considerations  
443 (W) x 381.5(H) x 200(D) mm  
17.5 ”(W)×15.1 ”(H)×8.0 ”(D)  
Dimensions  
Weight (NW)  
4.5 kg  
***The above specification is subject to actual product specification and is subject to change without  
prior notice.  
NOTES:  
The Maximum Resolution will depends on the display card supporting. Related issue can refer to  
22  
 

GE 27913 User Manual
EVGA nForce 750i SLI User Manual
Epson EMP Monitor User Manual
Eizo FlexScan L23 User Manual
Diamond Multimedia MSP100B User Manual
Dell PR09S User Manual
DDA SuperMatic SUPERMATIC SE13500 User Manual
Cypress PSoC Style AN2034 User Manual
Cypress CY8C21634 User Manual
Analog Devices EZ KIT Lite ADSP 21364 User Manual