Hanns G Computer Monitor HG216 User Manual

22 inch Wide Screen  
TFT LCD Monitor  
HG216  
USER’S MANUAL  
User’s Manual  
Congratulations!  
The display you have just purchased carries the TCO’03  
Displays label. This means that your display is designed,  
manufactured and tested according to some of the strictest  
quality and environmental requirements in the world. This makes  
for a high performance product, designed with the user in focus  
that also minimizes the impact on our natural environment.  
Some of the features of the TCO’03 Display requirements:  
Ergonomics  
Good visual ergonomics and image quality in order to improve the working environment  
for the user and to reduce sight and strain problems. Important parameters are  
luminance, contrast, resolution, reflectance, colour rendition and image stability.  
Energy  
Energy-saving mode after a certain time – beneficial both for the user and the  
environment  
Electrical safety  
Emissions  
Electromagnetic fields  
Noise emissions  
Ecology  
The product must be prepared for recycling and the manufacturer must have a certified  
environmental management system such as EMAS or ISO 14 001  
Restrictions on  
chlorinated and brominated flame retardants and polymers  
heavy metals such as cadmium, mercury and lead.  
The requirements included in this label have been developed by TCO Development in  
cooperation with scientists, experts, users as well as manufacturers all over the world.  
Since the end of the 1980s TCO has been involved in influencing the development of IT  
equipment in a more user-friendly direction. Our labelling system started with displays in  
1992 and is now requested by users and IT-manufacturers all over the world.  
For more information, please visit  
3
User’s Manual  
Recycling Information  
We, the Hanns.G care very much about our environment protection strategy and firmly  
believe that it helps us have healthier earth via appropriate treatment and recycling of  
industrial technology devices at the end-of-life.  
These devices contain recyclable materials, which can be re-decomposed and re-integrated  
into brand-new marvels. On the contrary, other material can be classified to hazardous and  
poisoned substances. We strongly encourage you to contact the provided information to  
recycle this product.  
For more information, please visit  
4
User’s Manual  
TABLE OF CONTENTS  
5
User’s Manual  
SAFETY NOTICE  
1. The changes or modifications not expressly approved by the party responsible for  
compliance could void the user's authority to operate the equipment.  
2. Shielded interface cables and AC power cord, if any, must be used in order to comply  
with the emission limits.  
3. The manufacturer is not responsible for any radio or TV interference caused by  
unauthorized modification to this equipment. It is the responsibilities of the user to  
correct such interference.  
WARNING:  
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously  
high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to  
qualified personnel only.  
PRECAUTIONS  
Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry  
tub, swimming pool or in a wet basement.  
Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can  
injure a person and cause serious damage to the appliance. Use only a cart or stand  
recommended by the manufacturer or sold with the monitor. If you mount the monitor on  
a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit  
instructions.  
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To  
ensure reliable operation of the monitor and to protect it from overheating, be sure these  
openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or  
similar surface. Do not place the monitor near or over a radiator or heat register. Do not  
place the monitor in a bookcase or cabinet unless proper ventilation is provided.  
The monitor should be operated only from the type of power source indicated on the  
label. If you are not sure of the type of power supplied to your home, consult your dealer  
or local power company.  
Unplug the unit during a lighting storm or when it will not be used for long period of time.  
This will protect the monitor from damage due to power surges.  
Do not overload power strips and extension cords. Overloading can result in fire or  
electric shock.  
Never push any object into the slot on the monitor cabinet. It could short circuit parts  
causing a fire or electric shock. Never spill liquids on the monitor.  
Do not attempt to service the monitor by yourself; opening or removing covers can  
expose you to dangerous voltages and other hazards. Please refer all servicing to  
qualified service personnel.  
To ensure satisfactory operation, use the monitor only with UL listed computers which  
have appropriate configured receptacles marked between 100 - 240V AC, Min. 5A.  
The wall socket shall be installed near the equipment and shall be easily accessible.  
6
 
User’s Manual  
SPECIAL NOTES ON LCD MONITORS  
The following symptoms are normal with LCD monitor and do not indicate a problem.  
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn  
off the Power Switch and then turn it on again to make sure the flicker disappears.  
You may find slightly uneven brightness on the screen depending on the desktop pattern  
you use.  
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of  
0.01% or less such as a missing pixel or a pixel lit all of the time.  
Due to the nature of the LCD screen, an afterimage of the previous screen may remain  
after switching the image, when the same image is displayed for hours. In this case, the  
screen is recovered slowly by changing the image or turning off the Power Switch for  
hours.  
If the screen suddenly flashes erratically or the backlighting fails, please contact your  
dealer or service center for repair. Do not attempt to repair the monitor yourself.  
Lamp Disposal  
LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR  
DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE  
INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.  
FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.  
7
 
User’s Manual  
BEFORE YOU OPERATE THE MONITOR  
FEATURES  
22” Wide screen TFT Color LCD Monitor  
Crisp, Clear Display for Windows  
Recommended Resolutions: 1680X 1050@60Hz  
EPA ENERGY STAR®  
Ergonomic Design  
Space Saving, Compact Case Design  
CHECKING THE CONTENTS OF THE PACKAGE  
The product package should include the following items:  
LCD Monitor  
Screen  
Base  
Cables and User manual  
HDMI Cable  
(dual input mode optional)  
Power Cord  
VGA Cable  
User’s manual  
Warranty card  
Audio Cable  
8
 
User’s Manual  
INSTALLATION INSTRUCTIONS  
Install  
Remove  
Figure.1. Installing and Removing the Base  
INSTALLATION:  
1. Align the monitor with the opening in the base.  
2. Note that the longer section of the base points forward.  
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected  
correctly.  
4. Verify that the monitor is securely attached to the base by looking at the bottom of the  
base and making sure that the clips are fully engaged in the base.  
REMOVAL:  
1. Flip over the monitor so that it is upside down.  
2. Press the 2 clips on the base that holds the monitor in place.  
3. Gently press and hold the 2 clips while pulling the base from the monitor unit they are  
unattached.  
POWER  
POWER SOURCE:  
1. Make sure that the power cord is the correct type required in your area.  
2. This LCD monitor has an Internal universal power supply that allows operation in either  
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)  
3. Connect the AC-power cord one end to your LCD monitor’s AC-input socket, the other  
end to wall-outlet .  
9
 
User’s Manual  
MAKING CONNECTIONS  
CONNECTING TO A PC  
Turn off your computer before performing the procedure below.  
1. Connect one end of the D-Sub cable to the back of the monitor and connect the other  
end to the computer’s D-Sub port.  
2. Connect one end of the HDMI cable (Dual input mode optional) to the back of the  
monitor and connect the other end to the computer’s HDMI port.  
3. Connect the audio cable between the monitor's audio input and the PC's audio output  
(green port).  
4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other  
end to Wall outlet.  
5. Turn on your monitor and computer.  
Figure.2. Connecting to a PC  
1.  
3.  
Power AC Input  
VGA Input  
2.  
4.  
HDMI Input (optional)  
Audio Input  
10  
 
User’s Manual  
ADJUSTING THE VIEWING ANGLE  
For optimal viewing it is recommended to look at the full face of the monitor, then adjust  
the monitor’s angle to your own preference.  
Hold the stand so you do not topple the monitor when you change the monitor’s angle.  
You are able to adjust the monitor’s angle from -5° to 20°.  
Monitor Angle  
Figure.3.  
NOTES:  
Do not touch the LCD screen when you change the angle. It may cause damage or  
break the LCD screen.  
Be careful not to place fingers or hands near the hinges when tilting the monitor,  
otherwise pinching can result.  
11  
 
User’s Manual  
OPERATING INSTRUCTIONS  
GENERAL INSTRUCTIONS  
Press the power button to turn the monitor on or off. The other control buttons are located  
on the front panel of the monitor (See Figure 4). By changing these settings, the picture can  
be adjusted to your personal preferences.  
The power cord should be connected.  
Connect the Signal cable from the monitor to the VGA card.  
Press the power button to turn on the monitor. The power indicator will light up.  
Figure.4. Control Panel Buttons  
CONTROL PANEL BUTTONS:  
1.  
3.  
5.  
Volume <  
2.  
4.  
6.  
Volume >  
Menu / Enter  
Power Button  
Auto Adjustment  
Power Indicator  
12  
 
User’s Manual  
FRONT PANEL CONTROL  
Power Button:  
Press this button to switch ON/OFF of monitor’s power.  
Power Indicator:  
Blue  
— Power On mode.  
Orange — Power Saving mode.  
MENU / ENTER:  
1. Activate the OSD menu or adjust the function settings and confirmation or  
2. Exit OSD menu when in volume OSD status.  
Adjust < >:  
1. Activates the volume control when the OSD is OFF.  
2. Navigate through adjustment icons when OSD is ON or adjust a function when  
function is activated.  
AUTO Button: (for D-sub only)  
When OSD menu is in off status, press and hold this button for more than two seconds to  
activate the Auto Adjustment function.  
(The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and  
Phase.)  
NOTES:  
Do not install the monitor in a location near heat sources such as radiators or air dusts,  
or in a place subject to direct sunlight, or excessive dust or mechanical vibration or  
shock.  
Save the original shipping box and packing materials, as they will come in handy if you  
ever have to ship your monitor.  
For maximum protection, repackage your monitor as it was originally packed at the  
factory.  
To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains  
may be removed with a cloth lightly dampened with a mild detergent solution. Never use  
strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage  
the cabinet. As a safety precaution, always unplug the monitor before cleaning it.  
Function Key Lock:  
Press the <, >and the Menubuttons simultaneously to enable the Function  
Key Lock. When the Function Key Lock is enabled, only the Power button is active.  
Press the<,>and theMenubuttons simultaneously again to unlock the function  
keys.  
13  
 
User’s Manual  
HOW TO ADJUST A SETTING  
Main Menu  
FUNCTION  
DESCRIPTION  
Select theBrightnessoption on theMain Menu. Enter the option by  
pressing the Menubutton again, and adjust the level.  
Select theContrastoption on theMain Menu. Enter the option by  
pressing the Menubutton again, and adjust the level.  
Select theImage Settingon theMain Menu, and then enter the  
option.  
Select theColor Settingoption on the Main Menu, and then enter  
the option.  
Select theOSD Settingoption on the Main Menu, and then enter  
the option.  
Brightness  
Contrast  
Image Setting  
Color Setting  
OSD Setting  
Other Setting  
Select theOther Settingoption on the Main Menu, and then enter  
the option.  
Select theInput Settingoption to change between the analog (D-Sub)  
or HDMI(HDMI) source. Enter the option and select Analog or Digital.  
Input Setting  
Exit  
Exit the OSD menu function.  
Image Setting  
FUNCTION  
DESCRIPTION  
Select the H-positionoption to shift the screen image to the left or  
right. Enter the option and adjust the level.  
H-position  
Select the V-positionoption to shift the screen image up or down.  
Enter the option and adjust the level.  
V-position  
14  
 
User’s Manual  
Select the Clock Adjustmentoption to reduce the vertical flicker of  
characters on the screen. Enter the option and adjust the level.  
Select thePhase Adjustmentoption to reduce the horizontal flicker of  
characters on the screen. Enter the option and adjust the level.  
Clock  
Adjustment  
Phase  
Adjustment  
Exit  
Exit the OSD menu function.  
Color Setting  
FUNCTION  
DESCRIPTION  
5500K/6500K/  
9300K  
Move the cursor to one of the preset options and select it.  
Move the cursor to the User option and select it  
1. To adjust the red, enter theRoption and adjust the level.  
2. To adjust the green, enter theGoption and adjust the level.  
3. To adjust the blue, enter theBoption and adjust the level.  
User  
Exit  
Exit the OSD menu function.  
OSD Setting  
FUNCTION  
DESCRIPTION  
Select the OSD H-Positionoption to adjust the horizontal position of  
the OSD. Enter the option and adjust the level.  
OSD H-Position  
Select theOSD V-Positionoption to adjust the vertical position of the  
OSD. Enter the option and adjust the level.  
Select the OSD Time-outoption to set the OSD time out from 10 to  
120 seconds. Enter the option and adjust the level.  
OSD V-position  
OSD Time-out  
Select theOSD Transparencyoption to adjust the transparency of the  
OSD. Enter the option and adjust the level.  
OSD  
Transparency  
15  
User’s Manual  
Select theOSD Colorsetting option to adjust the color of the OSD.  
Enter the option and adjust the level.  
OSD Color  
Select the Languageoption to change the language of the OSD.  
Language  
Exit  
Enter the option and select a language.  
(Reference only, the OSD Language is depended on selected model)  
Exit the OSD menu function.  
Other Setting  
FUNCTION  
DESCRIPTION  
Select theDDC/CIoption to switch the function On or Off. (dual input  
mode optional)  
DDC/CI  
Select the Volumeoption to change the volume level. Enter the  
option and adjust the level.  
Volume  
Select theSharpnessoption to adjust the sharpness of the display.  
Set the value from 0 to 6.  
Select theDOS modeoption to set the monitor for use with PC. Enter  
the option and select 720 × 400 or 640 × 400.  
Sharpness  
DOS mode  
Select theFactory Presetoption to reset to the monitor’s default  
setting. This will erase the current settings. Enter the option and select  
On or Off.  
Factory Preset  
Exit  
Exit the OSD menu function.  
16  
User’s Manual  
PLUG AND PLAY  
Plug & Play DDC2B Feature  
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC  
STANDARD. It allows the monitor to inform the host system of its identity and, depending  
on the level of DDC used, communicate additional information about its display capabilities.  
The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request  
EDID information over the DDC2B channel.  
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO  
INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE  
MUST BE A VIDEO INPUT SIGNAL.  
This monitor meets the Green monitor standards as set by the Video Electronics Standards  
Association (VESA) and/or the United States Environmental Protection Agency (EPA) and  
The Swedish Confederation Employees (NUTEK). This feature is designed to conserve  
electrical energy by reducing power consumption when there is no video-input signal  
present. When there is no video input signal this monitor, following a time-out period, will  
automatically switch to power saving mode. This reduces the monitor's internal power  
supply consumption. After the video input signal is restored, full power is restored and the  
display is automatically redrawn. The appearance is similar to a "Screen Saver" feature  
except the display is completely off. The display is restored by pressing a key on the  
keyboard, or clicking the mouse.  
17  
 
User’s Manual  
TECHNICAL SUPPORT (FAQ)  
Q & A FOR GENERAL PROBLEMS  
PROBLEM & QUESTION  
POSSIBLE SOLUTION  
*Check if the Power Switch is in the ON position  
*Power Cord should be connected  
Power LED is not on  
*Check if the PC system is Plug & Play compatible  
*Check if the Video Card is Plug & Play compatible  
*Check if any plug pins on the D-Sub or HDMI connector  
are bent  
No Plug & Play  
The display is too dark or  
too bright.  
*Adjust the Contrast and Brightness Controls.  
Picture bounces or a wave  
pattern is present in the  
picture  
*Move electrical devices that may cause electrical  
interference.  
*Computer Power Switch should be in the ON position.  
*Computer Video Card should be snugly seated in its slot  
*Make sure monitor’s video cable is properly connected to  
the computer.  
*Inspect monitor’s video cable and make sure none of the  
pins are bent.  
The power LED is ON  
(orange) but there’s no  
video or no picture.  
*Make sure computer is operational by hitting the CAPS  
LOCK key on the keyboard while observing the CAPS  
LOCK LED. The LED should either turn ON or OFF after  
hitting the CAPS LOCK key.  
Missing one of the primary  
colors (RED, GREEN, or  
BLUE)  
*Inspect the monitor’s video cable and make sure that  
none of the pins are bent.  
Screen image is not  
centered or sized properly.  
* Adjust pixel frequency CLOCK and PHASE or press  
hot-key (AUTO Button)  
Picture has color defects  
(white does not look white)  
* Adjust RGB color or select color temperature.  
*Use win 2000/ME/XP Right click anywhere on desktop  
and select Properties>Settings>Screen Resolution.  
Use the silder to adjust the reslution and click Apply  
The screen resolution  
needs to be adjusted  
18  
 
User’s Manual  
ERROR MESSAGE & POSSIBLE SOLUTIONS  
CABLE NOT CONNECTED :  
1. Check that the signal-cable is properly connected, If the connector is loose, tighten  
the connector’s screws.  
2. Check the signal-cable’s connection pins for damage.  
INPUT NOT SUPPORT :  
Your computer has been set to unsuitable display mode, set the computer to display  
mode given in the following table.  
FACTORY PRESET TIMING TABLE:  
HORIZONTAL  
FREQUENCY (KHz)  
VERTICAL  
FREQUENCY (Hz)  
MODE  
RESOLUTION  
1
640x350@70Hz  
640x400@70Hz  
720x400@70Hz  
640x480@60Hz  
640x480@67Hz  
640x480@72Hz  
640x480@75Hz  
800x600@56Hz  
800x600@60Hz  
800x600@72Hz  
800x600@75Hz  
1024x768@60Hz  
1024x768@70Hz  
1024x768@75Hz  
1152x864@75Hz  
1152x870@75Hz  
1280x720@60Hz  
1280x768@60Hz  
1280x768@75Hz  
1280x960@60Hz  
1280x960@75Hz  
1280x1024@60Hz  
1280x1024@75Hz  
1360x768@60Hz  
1440x900@60Hz  
31.469  
31.469  
31.469  
31.469  
35  
70.087  
70.087  
70.087  
59.94  
66.667  
72.809  
75  
2
3
4
5
6
37.861  
37.5  
7
8
35.156  
37.879  
48.077  
46.875  
49.725  
48.363  
56.476  
60.023  
67.5  
56.25  
60.317  
72.188  
75  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
74.5  
60.004  
70.069  
75.029  
75  
68.681  
45  
75.062  
60  
47.396  
60.289  
60  
59.995  
74.893  
60  
74.592  
63.981  
79.976  
47.712  
55.935  
74.443  
60.02  
75.025  
60.015  
59.887  
19  
 
User’s Manual  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
1440x900@75Hz  
70.635  
75  
74.984  
60  
1600x1200@60Hz  
1680x1050@60Hz  
720x480i@60Hz  
720x480p@60Hz  
720x576i@50Hz  
720x576p@50Hz  
1280x720p@50Hz  
1280x720p@60Hz  
1920x1080i@60Hz  
1920x1080i@50Hz  
65.29  
15.734  
31.469  
15.625  
31.25  
37.5  
59.954  
59.94  
59.94  
50  
50  
50  
45  
60  
33.75  
28.125  
60  
50  
20  
User’s Manual  
APPENDIX  
SPECIFICATIONS  
Driving system  
Size  
TFT Color LCD  
LCD Panel  
Video  
22” (21.6" Viewable)  
0.276mm(H) x 0.276mm(V)  
30KHz – 80KHz  
50 – 75Hz  
Pixel pitch  
H-Frequency  
V-Frequency  
Display Colors  
Max. Resolution  
Plug & Play  
16.7M Colors  
1680 x 1050 @75Hz  
VESA DDC2BTM  
ON Mode  
50W  
EPA ENERGY STAR®  
OFF Mode  
1W  
Audio output  
Rated Power 1 W rms (Per channel)  
D-Sub  
Input Terminal  
HDMI (Dual-Input Model)  
Hor. : 464.947mm  
Ver. : 290.58mm  
Maximum Screen Size  
Power Source  
100~240VAC,50±3Hz,60±3Hz  
Operating Temp: 0° to 40°C  
Storage Temp.: -20° to 60°C  
Operating Humidity: 20% to 90%  
Environmental  
Considerations  
518 (W) x 412(H) x 230(D) mm  
20.3 ”(W)×16.2 ”(H)×9.0 ”(D)  
Dimensions  
Weight (NW)  
5.8 kg (12.77 lb)  
***The above specification is subject to actual product specification and is subject to  
change without prior notice.  
NOTES:  
The Maximum Resolution will depends on the display card supporting. Related issue can  
21  
 

HP Hewlett Packard Compaq WF1907 User Manual
GE AHR65 User Manual
Electrolux E36GC65ESS User Manual
Electrolux 30 FREE STANDING GAS WAVE TOUCHTM RANGE 316471110 User Manual
BT Synergy 2110 User Manual
Bosch Appliances HBN 13M5 O User Manual
AZZA Computer Hardware 810T User Manual
Asus Computer Hardware ASUS P8Z77 I User Manual
ALCATEL Mobile Phones F200 User Manual
AEG 6010 K User Manual