User Guide
HP L156v 15” and L176v 17” LCD
Monitors
Document Part Number: 432558-001
July 2006
This guide provides information on setting up the monitor,
installing drivers, using the on-screen display menu,
troubleshooting and technical specifications.
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
L156v Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
L176v Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
OSD Lock Function. . . . . . . . . . . . . . . . . . . . . . . . . . 4–3
How To Adjust a Setting . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Adjusting the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4
Software and Utilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
User Guide
iii
Contents
The Information File . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Installing the .INF and .ICM Files . . . . . . . . . . . . . . . . . . 4–8
L176v Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–4
L156v Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B–6
C Agency Regulatory Notices
Commission Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–1
Modifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–2
Declaration of Conformity for Products Marked with the FCC
Logo (United States Only) . . . . . . . . . . . . . . . . . . . . . . . . C–2
Materials disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3
ENERGY STAR Compliance . . . . . . . . . . . . . . . . . . . . . C–3
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–3
iv
User Guide
1
Product Features
The flat panel display has an active matrix, thin-film transistor
(TFT), liquid crystal display (LCD). The monitor features
include:
L156v Model
■
38.1cm (15") TFT Color LCD Monitor
■
■
■
■
■
■
■
Crisp, clear display for Windows
Recommened resolutions: 1024 x 768 @60Hz
EPA ENERGY STAR®
Ergonomic design
Space saving, compact case design
Power cord, signal cable, audio cable
Software and documentation CD includes an information file
(INF), Image Color Matching file (ICM), and product
documentation
L176v Model
■
■
■
■
43.2cm (17") TFT Color LCD Monitor
Crisp, clear display for Windows
Recommended resolution: 1280 X 1024 @60Hz
EPA ENERGY STAR®
User Guide
1–1
Product Features
■
■
■
■
Ergonomic design
Space saving, compact case design
Power cord, signal cable, audio cable
Software and documentation CD includes an information file
(INF), Image Color Matching file (ICM), and product
documentation
1–2
User Guide
2
Safety and Maintenance
Guidelines
Important Safety Information
A power cord is included with your monitor. If another cord is
used, use only a power source and connection appropriate for this
monitor. For information on the correct power cord set to use with
your monitor, refer to the “Power Cord Set Requirements” section
in Appendix C.
WARNING: To reduce the risk of electric shock or damage to your
equipment, do not disable the power cord grounding feature. This
equipment is designed to be connected to a grounded (earthed)
power outlet that is easily accessible to the operator. The grounding
plug is an important safety feature.
Å
Å
WARNING: For your safety, be sure that the power outlet you plug
the power cord into is easily accessible and located as close to the
equipment as possible. When you need to disconnect the power to
the equipment, unplug the power cord from the power outlet by
grasping the plug firmly. Never pull on the cord.
User Guide
2–1
Safety and Maintenance Guidelines
CAUTION: For the protection of your monitor, as well as your
Ä
computer, connect all power cords for your computer and its
peripheral devices (such as a monitor, printer, scanner) to some form
of surge protection device such as a power strip or Uninterruptible
Power Supply (UPS). Not all power strips provide surge protection;
the power strips must be specifically labeled as having this ability.
Use a power strip whose manufacturer offers a Damage Replacement
Policy so you can replace your equipment if surge protection fails.
Maintenance Guidelines
To enhance the performance and extend the life of your monitor:
■
Do not open your monitor cabinet or attempt to service this
product yourself. Adjust only those controls that are covered
in the operating instructions. If your monitor is not operating
properly or has been dropped or damaged, contact your HP
authorized dealer, reseller, or service provider.
■
■
Use only a power source and connection appropriate for this
monitor, as indicated on the label/back plate of the monitor.
Be sure the total ampere rating of the products connected to
the outlet does not exceed the current rating of the electrical
outlet, and the total ampere rating of the products connected
to the cord does not exceed the rating of the cord. Look on the
power label to determine the ampere rating (AMPS or A) for
each device.
■
■
Install your monitor near an outlet that you can easily reach.
Disconnect the monitor by grasping the plug firmly and
pulling it from the outlet. Never disconnect the monitor by
pulling the cord.
Turn your monitor off when not in use. You can substantially
increase the life expectancy of your monitor by using a screen
saver program and turning off the monitor when not in use.
2–2
User Guide
Safety and Maintenance Guidelines
■
Slots and openings in the cabinet are provided for ventilation.
These openings must not be blocked or covered. Never push
objects of any kind into cabinet slots or other openings.
■
■
Do not drop your monitor or place it on an unstable surface.
Do not allow anything to rest on the power cord. Do not walk
on the cord.
■
■
Keep your monitor in a well-ventilated area, away from
excessive light, heat or moisture.
When removing the monitor base, you must lay the monitor
face down on a soft area to prevent it from getting scratched,
defaced, or broken.
Cleaning the Monitor
1. Turn off the monitor and the computer.
2. Unplug the monitor from the wall outlet.
3. Clean the monitor plastics with a clean cloth dampened with
water.
4. Clean the monitor screen with an antistatic screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any other
volatile substances to clean your monitor or the screen. These
chemicals may damage the cabinet finish as well as the screen.
Ä
Shipping the Monitor
Keep the original packing box in a storage area. You may need it
later if you move or ship your monitor.
User Guide
2–3
Safety and Maintenance Guidelines
2–4
User Guide
Setting Up the Monitor
Power Cord
Be sure the power cord is the correct type required in your region.
This LCD monitor has an internal universal power supply that
allows operation in either 100/120V AC or 220/240V AC voltage
area (No user adjustment is required.)
A certified power supply cord has to be used with this equipment.
The relevant national installation and/or equipment regulations
shall be considered. A certified power supply cord not lighter
than ordinary polyvinyl chloride flexible cord according to IEC
60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G
0.75mm2) shall be used. Alternative: a flexible cord of synthetic
rubber according to IEC 60245 (designation H05RR-F 3G
0.75mm2) shall be used.
✎
Connecting the Monitor
1. Connecting the signal cable: Connect one end of the signal
cable into the LCD monitor's socket, the other end into the
computer's VGA port, and tighten the two screws on the cable
connector.
2. Connecting the power cord: Connect one end of the
AC-power cord into the LCD monitor's AC input socket, the
other end into the wall outlet.
CAUTION: If the AC outlet is not grounded (with three holes), install
the proper grounding adapter (not supplied).
Ä
3. Connecting the audio line: Connect one end of an audio
cable into the computer's multimedia (or sound) card's audio
output, and the other end into the monitor's audio input.
3–2
User Guide
Setting Up the Monitor
1
2
3
VGA Input
AC Input socket
Audio Input
Adjusting the Viewing Angle
■
For optimal viewing, it is recommended that you look at the
full face of the monitor, then adjust the monitor's angle to
your own preference.
■
■
Hold the stand so you do not topple the monitor when you
change the monitor's angle.
o
o
You are able to adjust the monitor's angle from -5 to 20 .
User Guide
3–3
Setting Up the Monitor
CAUTION: Do not touch the LCD screen when you change
Ä
the angle. It may cause damage or break the LCD screen.
Careful attention is required not to catch your fingers or
hands when you change the angle.
3–4
User Guide
4
Operating the Monitor
General Instructions
Press the power button to turn the monitor on or off. The other
control buttons are located at the front panel of the monitor. By
changing these settings, the picture can be adjusted to your
personal preference.
■
■
■
The power cord should be connected.
Connect the video cable from the monitor to the video card.
Press the power button to turn on the monitor. The power
indicator will light up.
Front Panel Controls
User Guide
4–1
Operating the Monitor
L156v Model
Control
Function
1
Auto Config / Exit
When OSD menu is in active status, this button will
act as EXIT-KEY (EXIT OSD menu).
When OSD menu is in off status, press this button to
activate the Auto Adjustment function.
The Auto Adjustment function is used to optimized the
HPos, VPos, Clock and Focus.
2
3
/ Volume
Decrease volume or adjust function.
Power Button/ Power Press this button to switch the monitor’s power
Indicator
ON/OFF.
Blue - Power on mode
Orange - Off mode
4
5
/ Volume
Menu / Enter
Increase volume or adjust function.
Activates the OSD menu or function, adjusts, confirms
or Exits OSD menu when in volume OSD status.
4–2
User Guide
Operating the Monitor
L176v Model
Control
Function
1
Auto Adjust button / When OSD menu is in active status, this button will
Exit
act as EXIT-KEY (EXIT OSD menu).
When OSD menu is in off status, press and hold this
button for 2 seconds to activate the Auto Adjustment
function.
The Auto Adjustment function is used to set the HPos,
VPos, Clock and Focus.
2
3
/ Volume
Activates the volume control when the OSD is OFF or
navigates through adjustment icons when OSD is ON
or adjusts a function when function is activated.
Power Button/ Power Press this button to switch the monitor’s power
Indicator
ON/OFF.
Green - Power on mode
Orange - Off mode
4
5
/ Volume
Activates the volume control when the OSD is OFF or
navigates through adjustment icons when OSD is ON
or adjusts a function when function is activated.
Menu / Enter
Activates the OSD menu or function, adjusts, confirms
or Exits OSD menu when in Brightness/Contrast OSD
status.
OSD Lock Function
To lock the OSD, press and hold the MENU button while the
monitor is off and then press power button to turn the monitor on.
To unlock the OSD - press and hold the MENU button while the
monitor is off and then press the power button to turn the monitor
on.
User Guide
4–3
Operating the Monitor
How To Adjust a Setting
1. Press the MENU-button to activate the OSD window.
2. Press < or > to navigate through the functions. Once the
desired function is highlighted, press the MENU-button to
activate it. If the function selected has a sub-menu, press < or
> again to navigate through the sub-menu functions. Once the
desired function is highlighted, press MENU-button to
activate it.
3. Press < or > to change the settings of the selected function.
4. To exit and save, select the exit function. If you want to adjust
any other function, repeat steps 2-3.
Adjusting the Picture
The descriptions for function control LEDS.
4–4
User Guide
Operating the Monitor
MainMenu Main Sub Menu Sub Description
Item
Menu
Icon
Item
Menu
Icon
Luminance
Contrast
Contrast from
digital-register
Brightness
Focus
Backlight adjustment
Image Setup
Image Position
Color Temp
Adjust picture phase to
reduce horizontal line
noise
Clock
Adjust picture Clock to
reduce vertical-line noise
H. Position
V. Position
Warm
Adjust the horizontal
position of the picture
Adjust the vertical position
of the picture
N/A
N/A
Recall warm color
temperature from
EEPROM
Cool
Recall cool color
temperature from
EEPROM
User / Red
Red gain from
digital-register
User Guide
4–5
Operating the Monitor
MainMenu Main Sub Menu Sub Description
Item
Menu
Icon
Item
Menu
Icon
User / Green
Green gain digital-register
User / Blue
Yes
Blue gain from
digital-register
Auto Config
OSD Setup
N/A
N/A
Auto adjust the H/V
position, Focus and Clock
of picture
No
Do not execute Auto
Config, return to main
menu
Adjust the horizontal
position of the ODS
H. Position
V. Position
OSD Timeout
Language
Adjust the vertical position
of the OSD
Adjust the OSD timeout
Set OSD Language
Language
N/A
N/A
Information
Information
Show the resolution, H/V
frequency and input port
of current input timing
4–6
User Guide
Operating the Monitor
MainMenu Main Sub Menu Sub Description
Item
Menu
Icon
Item
Menu
Icon
Reset
Yes
N/A
Clear each old status of
Auto Configuration and
set the color temperature
to Cool
No
N/A
N/A
Do not execute reset,
return to main menu
Exit OSD
Exit
N/A
Software and Utilities
The monitor includes a CD that contains two files you can install
on your computer:
■
■
an .INF (Information) file
an .ICM (Image Color Matching) file
Adobe Reader is supplied on this CD and can be installed from
the menu.
If the monitor does not include a CD, the .INF and .ICM files can
be downloaded from the HP monitors support Web site. See
“Downloading from the Worldwide Web” in this chapter.
✎
The Information File
The .INF file defines monitor resources used by Microsoft
Windows operating systems to ensure monitor compatibility with
the computer’s graphics adapter.
User Guide
4–7
Operating the Monitor
This monitor is Windows Plug and Play compatible and the
monitor will work correctly without installing the .INF file.
Monitor Plug and Play compatibility requires that the computer’s
graphic card is VESA DDC2 compliant and that the monitor
connects directly to the graphics card. Plug and Play does not
work through separate BNC type connectors or through
distribution buffers/boxes. You may need to install the .INF file if
these conditions are not met.
The Image Color Matching File
The .ICM files are data files that are used in conjunction with
graphics programs to provide consistent color matching from
monitor screen to printer, or from scanner to monitor screen. The
.ICM file contains a monitor color system profile. This file is
activated from within graphics programs that support this feature.
The ICM color profile is written in accordance with the
International Color Consortium (ICC) Profile Format
specification.
✎
Installing the .INF and .ICM Files
After you determine that you need to update, you can install the
.INF and .ICM files from the CD or download them.
Installing from the CD
To install the .INF and .ICM files on the computer from the CD:
1. Insert the CD in the computer CD-ROM drive. The CD menu
displays.
2. View the “INF and ICM Readme” file.
3. Select “Install INF and ICM Files.”
4–8
User Guide
Operating the Monitor
4. Follow the on-screen instructions.
5. After the INF software has been installed, restart Windows.
6. Ensure that the proper resolution and refresh rates appear in
the Windows Display control panel.
You may need to install the digitally signed monitor .INF and
.ICM files manually from the CD in the event of an installation
error. Refer to the INF and ICM Readme file on the CD.
✎
Downloading from the Worldwide Web
To download the latest version of .INF and .ICM files from the
HP monitors support Web site:
region.
2. Follow the links for your monitor to the support page and
download page.
3. Ensure your system meets the requirements.
4. Download the software by following the instructions.
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities
according to the VESA DDC STANDARD. It allows the monitor
to inform the host system of its identity and, depending on the
level of DDC used, communicate additional information about its
display capabilities.
User Guide
4–9
Operating the Monitor
The DDC2B is a bidirectional data channel based on the I²C
protocol. The host can request EDID information over the
DDC2B channel.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL
IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR
THIS MONITOR TO OPERATE PROPERLY, THERE MUST
BE A VIDEO INPUT SIGNAL.
This monitor meets the Green monitor standards as set by the
Video Electronics Standards Association (VESA) and/or the
United States Environmental Protection Agency (EPA) and The
Swedish Confederation Employees (NUTEK). This feature is
designed to conserve electrical energy by reducing power
consumption when there is no video-input signal present. When
there is no video input signal this monitor, following a time-out
period, will automatically switch to an OFF mode. This reduces
the monitor's internal power supply consumption. After the video
input signal is restored, full power is restored and the display is
automatically redrawn. The appearance is similar to a "Screen
Saver" feature except the display is completely off. The display is
restored by pressing a key on the keyboard, or clicking the mouse.
4–10
User Guide
A
Troubleshooting
Solving Common Problems
The following table lists possible problems and the recommended
solutions.
Problem
Solution
Power LED is not on
Check if the power switch is in the ON position.
Power cord should be connected.
No Plug & Play
Check if the PC system is Plug & Play compatible.
Check if the Video Card is Plug & Play compatible.
Check if the D-15 plug pin of Video Cable is bent.
Picture is fuzzy
Adjust the contrast and brightness controls.
Picture bounces or a
wave pattern is
present in the picture
Move electrical devices that may cause electrical
interference.
The power LED is
ON but there's no
video or no picture
Computer Power Switch should be in the ON
position.
Computer Video Card should be snugly seated in its
slot.
Be sure monitor's video cable is properly connected
to the computer.
Inspect monitor's video cable and be sure none of
the pins are bent.
Be sure the computer is operational by pressing the
Caps Lock key on the keyboard while observing the
Caps Lock LED. The LED should either turn ON or
OFF after pressing the Caps Lock key.
User Guide
A–1
Troubleshooting
Problem
Solution
Missing one of the
primary colors (RED,
GREEN, or BLUE)
Inspect the monitor's video cable and be sure that
none of the pins are bent.
Screen image is not
centered or sized
properly
Adjust pixel frequency (CLOCK) and FOCUS or
press hot-key (AUTO).
Picture has color
defects (white does
not look white)
Adjust RGB color or select color temperature.
Horizontal or vertical
disturbances on the
screen
Use Microsoft Windows shut-down mode, adjust
CLOCK and FOCUS in the OSD menu or perform
hot- key (AUTO-key).
CLOCK (pixel frequency) controls the number of pixels scanned
by one horizontal sweep. If the frequency is not correct, the
screen shows vertical stripes and the picture has not correct
width.
FOCUS adjusts the phase of the pixel clock signal. With a wrong
phase adjustment the picture has horizontal disturbances in light
picture.
For FOCUS and CLOCK adjustment use “dot-pattern” or
Windows shut-down mode pattern.
Error Messages and Possible Solutions
Cable Not Connected - 1) Check that the signal-cable is properly
connected. If the connector is loose, tighten the connector's
screws. 2) Check the signal-cable's connection pins for damage.
Input Not Supported - Your computer has been set to an
unsuitable display mode. Set the computer to display a mode
listed in the “Factory Preset Display Modes” table in Appendix B
of this guide.
A–2
User Guide
Troubleshooting
Unsupported Mode. Try Different Video Card Setting - Your
computer resolution is out of VESA specification.
Using the Worldwide Web
For online access to technical support information, self-solve
tools, online assistance, community forums of IT experts, broad
multivendor knowledge base, monitoring and diagnostic tools, go
Preparing to call Technical Support
If you cannot solve a problem using the troubleshooting tips in
this section, you may need to call technical support. Have the
following information available when you call:
■
■
■
■
■
■
■
■
The monitor
Monitor model number
Serial number for the monitor
Purchase date on invoice
Conditions under which the problem occurred
Error messages received
Hardware configuration
Hardware and software you are using
User Guide
A–3
Troubleshooting
A–4
User Guide
B
Technical Specifications
All performance specifications are provided by the component
manufacturers. Performance specifications represent the highest
specification of all HP’s component manufacturers’ typical level
specifications for performance and actual performance may vary
either higher or lower.
✎
L156v Model
15” Flat Panel Monitor
LCD Panel
Driving System
TFT Color LCD
15.0 in
Size
38.1 cm
0.297 mm (H) x
0.297 mm (V)
Pixel Pitch
0.01 in (H) x
0.01 in (V)
Input
Video
R, G, B Analog Interface
H/V TTL
30kHz - 60kHz
55-75Hz
Separate Sync
H-Frequency
V-Frequency
Display Colors
Dot Clock
16.2M Colors
80MHz
Max Resolution
Native Resolution
1024 x 768 @ 75Hz
1024 X 768 @ 60Hz
User Guide
B–1
Technical Specifications
15” Flat Panel Monitor (Continued)
TM
Plug & Play
VESA DDC2B
EPA ENERGY STAR
On Mode
Off Mode
< 30W (for 2 CCFL)
< 2W
Audio Output
Rated power 1.0W rms (per channel)
D-sub 15 pin
Input Connector
Input Video Signal
Maximum Screen Size
Analog: 0.7Vp-p (standard, 75 OHM, Positive)
Horizontal: 11.97 in/304.1 mm
Vertical: 8.98 in/ 228.1mm
Power Source
100~240VAC, 50~60Hz
o
o
o
o
Environmental Considerations
Operating Temp: 41 to 95 F/ 5 to 35 C
o
o
o
o
Storage Temp: -4 to 140 F / -20 to 60 C
Operating Humidity: 10% to 85%
Weight (N.W.)
6.61 lbs
3 kg Unit (net)
B–2
User Guide
Technical Specifications
15” Flat Panel Monitor (Continued)
Dimensions
13.56 (w) x 13.64 (H) x 2.36 (D) in
344.6 (w) x 346.5 (H) x 160 (D) mm
External Controls
Switch
• Auto Adjust Key / Exit
• Volume
• Volume
• Power Button
• MENU / ENTER
Functions
• Contrast
• Brightness
• Focus
• Clock
• H.Position
• V.Position
• OSD location & Time
• Language
• Warm color temperature
• Cool color temperature
• RGB Color temperature
• Information
• Reset
• Exit
User Guide
B–3
Technical Specifications
L176v Model
17” Flat Panel Monitor
LCD Panel
Driving System
TFT Color LCD
17.0 in
Size
43.2 cm
0.264 mm (H) x
0.264 mm (V)
Pixel Pitch
0.01 in (H) x
0.01 in (V)
Input
Video
R, G, B Analog Interface
H/V TTL
30kHz - 60kHz
55-75Hz
Separate Sync
H-Frequency
V-Frequency
Display Colors
Dot Clock
16.2M Colors
135MHz
Max Resolution
Native Resolution
1280 x 768 @ 75Hz
1280 x 768 @ 60Hz
TM
Plug & Play
VESA DDC2B
EPA ENERGY STAR
On Mode
Off Mode
< 37W
< 2W
Audio Output
Rated power 1.0W rms (per channel)
D-sub 15 pin
Input Connector
Input Video Signal
Maximum Screen Size
Analog: 0.7Vp-p (standard, 75 OHM, Positive)
Horizontal: 13.38 in/339.92 mm
Vertical: 10.64 in/ 270.34mm
Power Source
100~240VAC, 47~63Hz
B–4
User Guide
Technical Specifications
17” Flat Panel Monitor (Continued)
o
o
o
o
Environmental Considerations
Operating Temp: 41 to 95 F/ 5 to 35 C
o
o
o
o
Storage Temp: -4 to 140 F / -20 to 60 C
Operating Humidity: 10% to 85%
Weight (N.W.)
Dimensions
9.92 lbs
4.5 kg Unit (net)
14.77 (w) x 15.0 (H) x 2.36 (D) in
375.4 (w) x 381.6 (H) x 160 (D) mm
External Controls
Switch
• Auto Adjust Key / Exit
• Volume
• Volume
• Power Button
• MENU / ENTER
Functions
• Contrast
• Brightness
• Focus
• Clock
• H.Position
• V.Position
• OSD location & Time
• Language
• Warm color temperature
• Cool color temperature
• RGB Color temperature
• Information
• Reset
• Exit
User Guide
B–5
Technical Specifications
Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used
modes and are set as factory defaults. This monitor automatically
recognizes these preset modes and they will appear properly sized
and centered on the screen.
L156v Model
Factory Preset Display Modes
Standard
Resolution
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
Horz Freq (kHz)
31.47
Vert Freq (Hz)
70.0
VGA
31.47
60.0
35.00
66.6
37.50
75.0
37.9
60.3
SVGA
35.156
37.879
48.077
46.875
49.725
48.363
56.476
56.3
60.0
72.2
75.0
75.0
XGA
60.0
70.0
B–6
User Guide
Technical Specifications
Factory Preset Display Modes (Continued)
Standard
Resolution
1024 x 768
1024 x 768
Horz Freq (kHz)
60.24
Vert Freq (Hz)
74.0
75.0
60.02
L176v Model
Factory Preset Display Modes
Standard
DOS-mode
DOS-mode
VGA
Resolution
640 x 350
720 x 400
640 x 480
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
Horz Freq (kHz)
31.47
Vert Freq (Hz)
70
70
31.47
31.47
60.0
66.6
75.0
72
35.00
37.50
37.86
SVGA
37.879
48.875
35.16
60.0
75
56
48.01
72
49.725
48.363
56.476
75.0
60.0
70.0
XGA
User Guide
B–7
Technical Specifications
Factory Preset Display Modes (Continued)
Standard
Resolution
1024 x 768
1280 x 1024
1280 x 1024
Horz Freq (kHz)
60.02
Vert Freq (Hz)
75
60
75
SXGA
64.02
80.00
Entering User Modes
The video controller signal may occasionally call for a mode that
is not preset if:
■
■
You are not using a standard graphics adapter.
You are not using a preset mode.
If this occurs, you may need to readjust the parameters of the
monitor screen by using the on-screen display. Your changes can
be made to any or all of these modes and saved in memory. The
monitor automatically stores the new setting, then recognizes the
new mode just as it does a preset mode. In addition to the 15
factory preset modes, there are four user modes that can be
entered and stored.
B–8
User Guide
C
Agency Regulatory Notices
Federal Communications
Commission Notice
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
■
■
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
■
■
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio or television
technician for help.
User Guide
C–1
Agency Regulatory Notices
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved
by Hewlett Packard Company may void the user's authority to
operate the equipment.
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Declaration of Conformity for Products
Marked with the FCC Logo (United
States Only)
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
For questions regarding your product, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-HP-INVENT (1-800 474-6836)
For questions regarding this FCC declaration, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call (281) 514-3333
C–2
User Guide
Agency Regulatory Notices
To identify this product, refer to the Part, Series, or Model
number found on the product.
Materials disposal
This HP product contains Mercury in the fluorescent lamp in the
display LCD that might require special handling at end-of-life.
Disposal of this material can be regulated because of
environmental considerations. For disposal or recycling
information, please contact your local authorities or the
Electronic Industries Alliance (EIA) (www.eiae.org).
ENERGY STAR Compliance
Monitors that are marked with the
ENERGY STAR Logo meet the
requirements of the U.S. Environmental
Protection Agency (EPA) ENERGY STAR
program. As an ENERGY STAR Partner,
Hewlett Packard Company has determined
that this product meets the ENERGY
STAR guidelines for energy efficiency.
Specific details on using the Energy Saving features can be found
in the energy saver or power management section of the computer
manual.
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line
Switching (ALS). This feature allows the monitor to operate on
input voltages between 100-120V or 200-240V.
The power cord set (flexible cord or wall plug) received with the
monitor meets the requirements for use in the country where you
purchased the equipment.
User Guide
C–3
Agency Regulatory Notices
If you need to obtain a power cord for a different country, you
should purchase a power cord that is approved for use in that
country.
The power cord must be rated for the product and for the voltage
and current marked on the product's electrical ratings label. The
voltage and current rating of the cord should be greater than the
voltage and current rating marked on the product. In addition, the
cross-sectional area of the wire must be a minimum of 0.75 mm²
or 18AWG, and the length of the cord must be between 5 feet
(1.5 m) and 12 feet (3.6 m). If you have questions about the type
of power cord to use, contact your HP authorized service
provider.
A power cord should be routed so that it is not likely to be walked
on or pinched by items placed upon it or against it. Particular
attention should be paid to the plug, electrical outlet, and the
point where the cord exits from the product.
C–4
User Guide
|